diff options
Diffstat (limited to 'arch/sh/boards/se/7751/setup.c')
| -rw-r--r-- | arch/sh/boards/se/7751/setup.c | 228 |
1 files changed, 0 insertions, 228 deletions
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c deleted file mode 100644 index 9d111bb884f..00000000000 --- a/arch/sh/boards/se/7751/setup.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * linux/arch/sh/kernel/setup_7751se.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine Support. - * - * Modified for 7751 Solution Engine by - * Ian da Silva and Jeremy Siegel, 2001. - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <linux/irq.h> - -#include <linux/hdreg.h> -#include <linux/ide.h> -#include <asm/io.h> -#include <asm/se7751/se7751.h> - -#ifdef CONFIG_SH_KGDB -#include <asm/kgdb.h> -#endif - -/* - * Configure the Super I/O chip - */ -#if 0 -/* Leftover code from regular Solution Engine, for reference. */ -/* The SH7751 Solution Engine has a different SuperIO. */ -static void __init smsc_config(int index, int data) -{ - outb_p(index, INDEX_PORT); - outb_p(data, DATA_PORT); -} - -static void __init init_smsc(void) -{ - outb_p(CONFIG_ENTER, CONFIG_PORT); - outb_p(CONFIG_ENTER, CONFIG_PORT); - - /* FDC */ - smsc_config(CURRENT_LDN_INDEX, LDN_FDC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ - - /* IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ - - /* AUXIO (GPIO): to use IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); - smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ - smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */ - - /* COM1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x03); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */ - - /* COM2 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM2); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x02); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */ - - /* RTC */ - smsc_config(CURRENT_LDN_INDEX, LDN_RTC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */ - - /* XXX: PARPORT, KBD, and MOUSE will come here... */ - outb_p(CONFIG_EXIT, CONFIG_PORT); -} -#endif - -const char *get_system_type(void) -{ - return "7751 SolutionEngine"; -} - -#ifdef CONFIG_SH_KGDB -static int kgdb_uart_setup(void); -static struct kgdb_sermap kgdb_uart_sermap = -{ "ttyS", 0, kgdb_uart_setup, NULL }; -#endif - -/* - * Initialize the board - */ -void __init platform_setup(void) -{ - /* Call init_smsc() replacement to set up SuperIO. */ - /* XXX: RTC setting comes here */ -#ifdef CONFIG_SH_KGDB - kgdb_register_sermap(&kgdb_uart_sermap); -#endif -} - -/********************************************************************* - * Currently a hack (e.g. does not interact well w/serial.c, lots of * - * hardcoded stuff) but may be useful if SCI/F needs debugging. * - * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and * - * arch/i386/lib/kgdb_serial.c). * - *********************************************************************/ - -#ifdef CONFIG_SH_KGDB -#include <linux/types.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/serial_reg.h> - -#define COM1_PORT 0x3f8 /* Base I/O address */ -#define COM1_IRQ 4 /* IRQ not used yet */ -#define COM2_PORT 0x2f8 /* Base I/O address */ -#define COM2_IRQ 3 /* IRQ not used yet */ - -#define SB_CLOCK 1843200 /* Serial baud clock */ -#define SB_BASE (SB_CLOCK/16) -#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS - -struct uart_port { - int base; -}; -#define UART_NPORTS 2 -struct uart_port uart_ports[] = { - { COM1_PORT }, - { COM2_PORT }, -}; -struct uart_port *kgdb_uart_port; - -#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg) -#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg) - -/* Basic read/write functions for the UART */ -#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE) -static int kgdb_uart_getchar(void) -{ - int lsr; - int c = -1; - - while (c == -1) { - lsr = UART_IN(UART_LSR); - if (lsr & UART_LSR_DR) - c = UART_IN(UART_RX); - if ((lsr & UART_LSR_RXCERR)) - c = -1; - } - return c; -} - -static void kgdb_uart_putchar(int c) -{ - while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0) - ; - UART_OUT(UART_TX, c); -} - -/* - * Initialize UART to configured/requested values. - * (But we don't interrupts yet, or interact w/serial.c) - */ -static int kgdb_uart_setup(void) -{ - int port; - int lcr = 0; - int bdiv = 0; - - if (kgdb_portnum >= UART_NPORTS) { - KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum); - return -1; - } - - kgdb_uart_port = &uart_ports[kgdb_portnum]; - - /* Init sequence from gdb_hook_interrupt */ - UART_IN(UART_RX); - UART_OUT(UART_IER, 0); - - UART_IN(UART_RX); /* Serial driver comments say */ - UART_IN(UART_IIR); /* this clears interrupt regs */ - UART_IN(UART_MSR); - - /* Figure basic LCR values */ - switch (kgdb_bits) { - case '7': - lcr |= UART_LCR_WLEN7; - break; - default: case '8': - lcr |= UART_LCR_WLEN8; - break; - } - switch (kgdb_parity) { - case 'O': - lcr |= UART_LCR_PARITY; - break; - case 'E': - lcr |= (UART_LCR_PARITY | UART_LCR_EPAR); - break; - default: break; - } - - /* Figure the baud rate divisor */ - bdiv = (SB_BASE/kgdb_baud); - - /* Set the baud rate and LCR values */ - UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB)); - UART_OUT(UART_DLL, (bdiv & 0xff)); - UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff)); - UART_OUT(UART_LCR, lcr); - - /* Set the MCR */ - UART_OUT(UART_MCR, SB_MCR); - - /* Turn off FIFOs for now */ - UART_OUT(UART_FCR, 0); - - /* Setup complete: initialize function pointers */ - kgdb_getchar = kgdb_uart_getchar; - kgdb_putchar = kgdb_uart_putchar; - - return 0; -} -#endif /* CONFIG_SH_KGDB */ |