3 files changed, 0 insertions, 174 deletions
diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/renesas/sh7763rdp/Makefile
deleted file mode 100644
index f6c0b55516d..00000000000
--- a/arch/sh/boards/renesas/sh7763rdp/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y    := setup.o irq.o
diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/renesas/sh7763rdp/irq.c
deleted file mode 100644
index fd850bad2de..00000000000
--- a/arch/sh/boards/renesas/sh7763rdp/irq.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
- *
- * Renesas Solutions SH7763RDP Support.
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sh7763rdp.h>
-
-#define INTC_BASE		(0xFFD00000)
-#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
-#define INTC_INT2MSKCR	(INTC_BASE+0x4003C)
-#define INTC_INT2MSKCR1	(INTC_BASE+0x400D4)
-
-/*
- * Initialize IRQ setting
- */
-void __init init_sh7763rdp_IRQ(void)
-{
-	/* GPIO enabled */
-	ctrl_outl(1 << 25, INTC_INT2MSKCR);
-
-	/* enable GPIO interrupts */
-	ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
-		  INTC_INT2PRI7);
-
-	/* USBH enabled */
-	ctrl_outl(1 << 17, INTC_INT2MSKCR1);
-
-	/* GETHER enabled */
-	ctrl_outl(1 << 16, INTC_INT2MSKCR1);
-
-	/* DMAC enabled */
-	ctrl_outl(1 << 8, INTC_INT2MSKCR);
-}
diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/renesas/sh7763rdp/setup.c
deleted file mode 100644
index 925f16af712..00000000000
--- a/arch/sh/boards/renesas/sh7763rdp/setup.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
- *
- * Renesas Solutions sh7763rdp board
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-#include <asm/io.h>
-#include <asm/sh7763rdp.h>
-
-/* NOR Flash */
-static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
-	{
-		.name = "U-Boot",
-		.offset = 0,
-		.size = (2 * 128 * 1024),
-		.mask_flags = MTD_WRITEABLE,	/* Read-only */
-	}, {
-		.name = "Linux-Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = (20 * 128 * 1024),
-	}, {
-		.name = "Root Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sh7763rdp_nor_flash_data = {
-	.width = 2,
-	.parts = sh7763rdp_nor_flash_partitions,
-	.nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
-};
-
-static struct resource sh7763rdp_nor_flash_resources[] = {
-	[0] = {
-		.name = "NOR Flash",
-		.start = 0,
-		.end = (64 * 1024 * 1024),
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sh7763rdp_nor_flash_device = {
-	.name = "physmap-flash",
-	.resource = sh7763rdp_nor_flash_resources,
-	.num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
-	.dev = {
-		.platform_data = &sh7763rdp_nor_flash_data,
-	},
-};
-
-static struct platform_device *sh7763rdp_devices[] __initdata = {
-	&sh7763rdp_nor_flash_device,
-};
-
-static int __init sh7763rdp_devices_setup(void)
-{
-	return platform_add_devices(sh7763rdp_devices,
-				    ARRAY_SIZE(sh7763rdp_devices));
-}
-__initcall(sh7763rdp_devices_setup);
-
-static void __init sh7763rdp_setup(char **cmdline_p)
-{
-	/* Board version check */
-	if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
-		printk(KERN_INFO "RTE Standard Configuration\n");
-	else
-		printk(KERN_INFO "RTA Standard Configuration\n");
-
-	/* USB pin select bits (clear bit 5-2 to 0) */
-	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
-	/* USBH setup port I controls to other (clear bits 4-9 to 0) */
-	ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
-
-	/* Select USB Host controller */
-	ctrl_outw(0x00, USB_USBHSC);
-
-	/* For LCD */
-	/* set PTJ7-1, bits 15-2 of PJCR to 0 */
-	ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
-	/* set PTI5, bits 11-10 of PICR to 0 */
-	ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
-	ctrl_outw(0, PORT_PKCR);
-	ctrl_outw(0, PORT_PLCR);
-	/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
-	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
-	/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
-	ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
-
-	/* For HAC */
-	/* bit3-0  0100:HAC & SSI1 enable */
-	ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
-	/* bit14      1:SSI_HAC_CLK enable */
-	ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
-
-	/* SH-Ether */
-	ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
-	ctrl_outw(0x0, PORT_PFCR);
-	ctrl_outw(0x0, PORT_PFCR);
-	ctrl_outw(0x0, PORT_PFCR);
-
-	/* MMC */
-	/*selects SCIF and MMC other functions */
-	ctrl_outw(0x0001, PORT_PSEL0);
-	/* MMC clock operates */
-	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
-	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
-	ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
-}
-
-static struct sh_machine_vector mv_sh7763rdp __initmv = {
-	.mv_name = "sh7763drp",
-	.mv_setup = sh7763rdp_setup,
-	.mv_nr_irqs = 112,
-	.mv_init_irq = init_sh7763rdp_IRQ,
-};