diff options
Diffstat (limited to 'arch/sh/boards/mach-se/7780')
| -rw-r--r-- | arch/sh/boards/mach-se/7780/irq.c | 38 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7780/setup.c | 48 |
2 files changed, 49 insertions, 37 deletions
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 66ad292c9fc..d5c9edc172a 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -12,35 +12,57 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/io.h> #include <mach-se/mach/se7780.h> +#define INTC_BASE 0xffd00000 +#define INTC_ICR1 (INTC_BASE+0x1c) + /* * Initialize IRQ setting */ void __init init_se7780_IRQ(void) { /* enable all interrupt at FPGA */ - ctrl_outw(0, FPGA_INTMSK1); + __raw_writew(0, FPGA_INTMSK1); /* mask SM501 interrupt */ - ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1); + __raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1); /* enable all interrupt at FPGA */ - ctrl_outw(0, FPGA_INTMSK2); + __raw_writew(0, FPGA_INTMSK2); /* set FPGA INTSEL register */ /* FPGA + 0x06 */ - ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) | + __raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) | (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1); /* FPGA + 0x08 */ - ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) | + __raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) | (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) | (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) | (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2); /* FPGA + 0x0A */ - ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); + __raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */ + + /* ICR1: detect low level(for 2ndcut) */ + __raw_writel(0xAAAA0000, INTC_ICR1); + + /* + * FPGA PCISEL register initialize + * + * CPU || SLOT1 | SLOT2 | S-ATA | USB + * ------------------------------------- + * INTA || INTA | INTD | -- | INTB + * ------------------------------------- + * INTB || INTB | INTA | -- | INTC + * ------------------------------------- + * INTC || INTC | INTB | INTA | -- + * ------------------------------------- + * INTD || INTD | INTC | -- | INTA + * ------------------------------------- + */ + __raw_writew(0x0013, FPGA_PCI_INTSEL1); + __raw_writew(0xE402, FPGA_PCI_INTSEL2); } diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index 1d3a867e94e..ae5a1d84fdf 100644 --- a/arch/sh/boards/mach-se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -17,26 +17,17 @@ #include <asm/heartbeat.h> /* Heartbeat */ -static struct heartbeat_data heartbeat_data = { - .regsize = 16, -}; - -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; /* SMC91x */ @@ -84,14 +75,14 @@ device_initcall(se7780_devices_setup); static void __init se7780_setup(char **cmdline_p) { /* "SH-Linux" on LED Display */ - ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) ); - ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) ); - ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) ); - ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) ); - ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) ); - ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) ); - ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) ); - ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) ); + __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) ); + __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) ); + __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) ); + __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) ); + __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) ); + __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) ); + __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) ); + __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) ); printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n"); @@ -102,15 +93,15 @@ static void __init se7780_setup(char **cmdline_p) * REQ2/GNT2 -> Serial ATA * REQ3/GNT3 -> PCI slot */ - ctrl_outw(0x0213, FPGA_REQSEL); + __raw_writew(0x0213, FPGA_REQSEL); /* GPIO setting */ - ctrl_outw(0x0000, GPIO_PECR); - ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR); - ctrl_outw(0x0c00, GPIO_PMSELR); + __raw_writew(0x0000, GPIO_PECR); + __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR); + __raw_writew(0x0c00, GPIO_PMSELR); /* iVDR Power ON */ - ctrl_outw(0x0001, FPGA_IVDRPW); + __raw_writew(0x0001, FPGA_IVDRPW); } /* @@ -119,6 +110,5 @@ static void __init se7780_setup(char **cmdline_p) static struct sh_machine_vector mv_se7780 __initmv = { .mv_name = "Solution Engine 7780" , .mv_setup = se7780_setup , - .mv_nr_irqs = 111 , .mv_init_irq = init_se7780_IRQ, }; |