aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards/mach-kfr2r09/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-kfr2r09/setup.c')
-rw-r--r--arch/sh/boards/mach-kfr2r09/setup.c117
1 files changed, 73 insertions, 44 deletions
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 5d7b5d92475..1df4398f837 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -10,6 +10,9 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/onenand.h>
#include <linux/delay.h>
@@ -18,7 +21,12 @@
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
+#include <linux/platform_data/lv5207lp.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
+#include <linux/sh_intc.h>
#include <media/rj54n1cb0c.h>
#include <media/soc_camera.h>
#include <media/sh_mobile_ceu.h>
@@ -106,7 +114,7 @@ static struct resource kfr2r09_sh_keysc_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 79,
+ .start = evt2irq(0xbe0),
.flags = IORESOURCE_IRQ,
},
};
@@ -119,8 +127,20 @@ static struct platform_device kfr2r09_sh_keysc_device = {
.dev = {
.platform_data = &kfr2r09_sh_keysc_info,
},
- .archdata = {
- .hwblk_id = HWBLK_KEYSC,
+};
+
+static const struct fb_videomode kfr2r09_lcdc_modes[] = {
+ {
+ .name = "TX07D34VM0AAA",
+ .xres = 240,
+ .yres = 400,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .upper_margin = 0,
+ .lower_margin = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
@@ -128,31 +148,17 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
- .bpp = 16,
+ .fourcc = V4L2_PIX_FMT_RGB565,
.interface_type = SYS18,
.clock_divider = 6,
.flags = LCDC_FLAGS_DWPOL,
- .lcd_cfg = {
- .name = "TX07D34VM0AAA",
- .xres = 240,
- .yres = 400,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .upper_margin = 0,
- .lower_margin = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- },
- .lcd_size_cfg = {
+ .lcd_modes = kfr2r09_lcdc_modes,
+ .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
+ .panel_cfg = {
.width = 35,
.height = 58,
- },
- .board_cfg = {
.setup_sys = kfr2r09_lcd_setup,
.start_transfer = kfr2r09_lcd_start,
- .display_on = kfr2r09_lcd_on,
- .display_off = kfr2r09_lcd_off,
},
.sys_bus_cfg = {
.ldmt2r = 0x07010904,
@@ -171,7 +177,7 @@ static struct resource kfr2r09_sh_lcdc_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 106,
+ .start = evt2irq(0xf40),
.flags = IORESOURCE_IRQ,
},
};
@@ -183,9 +189,17 @@ static struct platform_device kfr2r09_sh_lcdc_device = {
.dev = {
.platform_data = &kfr2r09_sh_lcdc_info,
},
- .archdata = {
- .hwblk_id = HWBLK_LCDC,
- },
+};
+
+static struct lv5207lp_platform_data kfr2r09_backlight_data = {
+ .fbdev = &kfr2r09_sh_lcdc_device.dev,
+ .def_value = 13,
+ .max_value = 13,
+};
+
+static struct i2c_board_info kfr2r09_backlight_board_info = {
+ I2C_BOARD_INFO("lv5207lp", 0x75),
+ .platform_data = &kfr2r09_backlight_data,
};
static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
@@ -199,8 +213,8 @@ static struct resource kfr2r09_usb0_gadget_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 65,
- .end = 65,
+ .start = evt2irq(0xa20),
+ .end = evt2irq(0xa20),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
@@ -229,8 +243,8 @@ static struct resource kfr2r09_ceu_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 52,
- .end = 52,
+ .start = evt2irq(0x880),
+ .end = evt2irq(0x880),
.flags = IORESOURCE_IRQ,
},
[2] = {
@@ -246,9 +260,6 @@ static struct platform_device kfr2r09_ceu_device = {
.dev = {
.platform_data = &sh_mobile_ceu_info,
},
- .archdata = {
- .hwblk_id = HWBLK_CEU0,
- },
};
static struct i2c_board_info kfr2r09_i2c_camera = {
@@ -282,7 +293,7 @@ static int camera_power(struct device *dev, int mode)
* use 1.8 V for VccQ_VIO
* use 2.85V for VccQ_SR
*/
- ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+ __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
/* reset clear */
ret = gpio_request(GPIO_PTB4, NULL);
@@ -331,7 +342,6 @@ static struct soc_camera_link rj54n1_link = {
.power = camera_power,
.board_info = &kfr2r09_i2c_camera,
.i2c_adapter_id = 1,
- .module_name = "rj54n1cb0c",
.priv = &rj54n1_priv,
};
@@ -343,25 +353,39 @@ static struct platform_device kfr2r09_camera = {
},
};
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
static struct resource kfr2r09_sh_sdhi0_resources[] = {
[0] = {
.name = "SDHI0",
.start = 0x04ce0000,
- .end = 0x04ce01ff,
+ .end = 0x04ce00ff,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = evt2irq(0xe80),
.flags = IORESOURCE_IRQ,
},
};
+static struct sh_mobile_sdhi_info sh7724_sdhi0_data = {
+ .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
+ .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
+ .tmio_caps = MMC_CAP_SDIO_IRQ,
+};
+
static struct platform_device kfr2r09_sh_sdhi0_device = {
.name = "sh_mobile_sdhi",
.num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
.resource = kfr2r09_sh_sdhi0_resources,
- .archdata = {
- .hwblk_id = HWBLK_SDHI0,
+ .dev = {
+ .platform_data = &sh7724_sdhi0_data,
},
};
@@ -492,13 +516,13 @@ static int kfr2r09_usb0_gadget_setup(void)
if (kfr2r09_usb0_gadget_i2c_setup() != 0)
return -ENODEV; /* unable to configure using i2c */
- ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
msleep(20); /* wait 20ms to let the clock settle */
clk_enable(clk_get(NULL, "usb0"));
- ctrl_outw(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa40501d4);
return 0;
}
@@ -518,6 +542,9 @@ static int __init kfr2r09_devices_setup(void)
&kfr2r09_sdram_leave_start,
&kfr2r09_sdram_leave_end);
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
/* enable SCIF1 serial port for YC401 console support */
gpio_request(GPIO_FN_SCIF1_RXD, NULL);
gpio_request(GPIO_FN_SCIF1_TXD, NULL);
@@ -526,12 +553,12 @@ static int __init kfr2r09_devices_setup(void)
gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
/* setup NOR flash at CS0 */
- ctrl_outl(0x36db0400, BSC_CS0BCR);
- ctrl_outl(0x00000500, BSC_CS0WCR);
+ __raw_writel(0x36db0400, BSC_CS0BCR);
+ __raw_writel(0x00000500, BSC_CS0WCR);
/* setup NAND flash at CS4 */
- ctrl_outl(0x36db0400, BSC_CS4BCR);
- ctrl_outl(0x00000500, BSC_CS4WCR);
+ __raw_writel(0x36db0400, BSC_CS4BCR);
+ __raw_writel(0x00000500, BSC_CS4WCR);
/* setup KEYSC pins */
gpio_request(GPIO_FN_KEYOUT0, NULL);
@@ -607,6 +634,8 @@ static int __init kfr2r09_devices_setup(void)
gpio_request(GPIO_FN_SDHI0CMD, NULL);
gpio_request(GPIO_FN_SDHI0CLK, NULL);
+ i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
+
return platform_add_devices(kfr2r09_devices,
ARRAY_SIZE(kfr2r09_devices));
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-15 19:54:21 +0000