diff options
Diffstat (limited to 'arch/sh/boards/mach-kfr2r09/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-kfr2r09/setup.c | 51 |
1 files changed, 37 insertions, 14 deletions
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 5b382e1afae..1df4398f837 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -21,8 +21,12 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/i2c.h> +#include <linux/platform_data/lv5207lp.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/videodev2.h> +#include <linux/sh_intc.h> #include <media/rj54n1cb0c.h> #include <media/soc_camera.h> #include <media/sh_mobile_ceu.h> @@ -110,7 +114,7 @@ static struct resource kfr2r09_sh_keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -148,17 +152,13 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { .interface_type = SYS18, .clock_divider = 6, .flags = LCDC_FLAGS_DWPOL, - .lcd_cfg = kfr2r09_lcdc_modes, - .num_cfg = ARRAY_SIZE(kfr2r09_lcdc_modes), - .lcd_size_cfg = { + .lcd_modes = kfr2r09_lcdc_modes, + .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes), + .panel_cfg = { .width = 35, .height = 58, - }, - .board_cfg = { .setup_sys = kfr2r09_lcd_setup, .start_transfer = kfr2r09_lcd_start, - .display_on = kfr2r09_lcd_on, - .display_off = kfr2r09_lcd_off, }, .sys_bus_cfg = { .ldmt2r = 0x07010904, @@ -177,7 +177,7 @@ static struct resource kfr2r09_sh_lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 106, + .start = evt2irq(0xf40), .flags = IORESOURCE_IRQ, }, }; @@ -191,6 +191,17 @@ static struct platform_device kfr2r09_sh_lcdc_device = { }, }; +static struct lv5207lp_platform_data kfr2r09_backlight_data = { + .fbdev = &kfr2r09_sh_lcdc_device.dev, + .def_value = 13, + .max_value = 13, +}; + +static struct i2c_board_info kfr2r09_backlight_board_info = { + I2C_BOARD_INFO("lv5207lp", 0x75), + .platform_data = &kfr2r09_backlight_data, +}; + static struct r8a66597_platdata kfr2r09_usb0_gadget_data = { .on_chip = 1, }; @@ -202,8 +213,8 @@ static struct resource kfr2r09_usb0_gadget_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -232,8 +243,8 @@ static struct resource kfr2r09_ceu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, - .end = 52, + .start = evt2irq(0x880), + .end = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -342,6 +353,13 @@ static struct platform_device kfr2r09_camera = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource kfr2r09_sh_sdhi0_resources[] = { [0] = { .name = "SDHI0", @@ -350,7 +368,7 @@ static struct resource kfr2r09_sh_sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; @@ -524,6 +542,9 @@ static int __init kfr2r09_devices_setup(void) &kfr2r09_sdram_leave_start, &kfr2r09_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* enable SCIF1 serial port for YC401 console support */ gpio_request(GPIO_FN_SCIF1_RXD, NULL); gpio_request(GPIO_FN_SCIF1_TXD, NULL); @@ -613,6 +634,8 @@ static int __init kfr2r09_devices_setup(void) gpio_request(GPIO_FN_SDHI0CMD, NULL); gpio_request(GPIO_FN_SDHI0CLK, NULL); + i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1); + return platform_add_devices(kfr2r09_devices, ARRAY_SIZE(kfr2r09_devices)); } |