diff options
Diffstat (limited to 'arch/sh/boards/mach-ecovec24/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-ecovec24/setup.c | 697 |
1 files changed, 499 insertions, 198 deletions
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 5c246289b4f..85d5255d259 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -11,28 +11,38 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> +#include <linux/mfd/tmio.h> #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> +#include <linux/usb/renesas_usbhs.h> #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/spi/spi.h> #include <linux/spi/sh_msiof.h> #include <linux/spi/mmc_spi.h> -#include <linux/mmc/host.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> -#include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/platform_data/gpio_backlight.h> +#include <linux/sh_eth.h> +#include <linux/sh_intc.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <sound/sh_fsi.h> +#include <sound/simple_card.h> #include <media/sh_mobile_ceu.h> +#include <media/soc_camera.h> #include <media/tw9910.h> #include <media/mt9t112.h> #include <asm/heartbeat.h> -#include <asm/sh_eth.h> #include <asm/clock.h> #include <asm/suspend.h> #include <cpu/sh7724.h> @@ -62,20 +72,28 @@ * OFF-ON : MMC */ +/* + * FSI - DA7210 + * + * it needs amixer settings for playing + * + * amixer set 'HeadPhone' 80 + * amixer set 'Out Mixer Left DAC Left' on + * amixer set 'Out Mixer Right DAC Right' on + */ + /* Heartbeat */ static unsigned char led_pos[] = { 0, 1, 2, 3 }; + static struct heartbeat_data heartbeat_data = { - .regsize = 8, .nr_bits = 4, .bit_pos = led_pos, }; -static struct resource heartbeat_resources[] = { - [0] = { - .start = 0xA405012C, /* PTG */ - .end = 0xA405012E - 1, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = 0xA405012C, /* PTG */ + .end = 0xA405012E - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }; static struct platform_device heartbeat_device = { @@ -84,8 +102,8 @@ static struct platform_device heartbeat_device = { .dev = { .platform_data = &heartbeat_data, }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; /* MTD */ @@ -135,32 +153,30 @@ static struct resource sh_eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 91, + .start = evt2irq(0xd60), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; -struct sh_eth_plat_data sh_eth_plat = { +static struct sh_eth_plat_data sh_eth_plat = { .phy = 0x1f, /* SMSC LAN8700 */ .edmac_endian = EDMAC_LITTLE_ENDIAN, + .phy_interface = PHY_INTERFACE_MODE_MII, .ether_link_active_low = 1 }; static struct platform_device sh_eth_device = { - .name = "sh-eth", - .id = 0, + .name = "sh7724-ether", + .id = 0, .dev = { .platform_data = &sh_eth_plat, }, .num_resources = ARRAY_SIZE(sh_eth_resources), .resource = sh_eth_resources, - .archdata = { - .hwblk_id = HWBLK_ETHER, - }, }; /* USB0 host */ -void usb0_port_power(int port, int power) +static void usb0_port_power(int port, int power) { gpio_set_value(GPIO_PTB4, power); } @@ -177,8 +193,8 @@ static struct resource usb0_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -196,7 +212,7 @@ static struct platform_device usb0_host_device = { }; /* USB1 host/function */ -void usb1_port_power(int port, int power) +static void usb1_port_power(int port, int power) { gpio_set_value(GPIO_PTB5, power); } @@ -213,8 +229,8 @@ static struct resource usb1_common_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 66, - .end = 66, + .start = evt2irq(0xa40), + .end = evt2irq(0xa40), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -231,21 +247,103 @@ static struct platform_device usb1_common_device = { .resource = usb1_common_resources, }; -/* LCDC */ +/* + * USBHS + */ +static int usbhs_get_id(struct platform_device *pdev) +{ + return gpio_get_value(GPIO_PTB3); +} + +static int usbhs_phy_reset(struct platform_device *pdev) +{ + /* enable vbus if HOST */ + if (!gpio_get_value(GPIO_PTB3)) + gpio_set_value(GPIO_PTB5, 1); + + return 0; +} + +static struct renesas_usbhs_platform_info usbhs_info = { + .platform_callback = { + .get_id = usbhs_get_id, + .phy_reset = usbhs_phy_reset, + }, + .driver_param = { + .buswait_bwait = 4, + .detection_delay = 5, + .d0_tx_id = SHDMA_SLAVE_USB1D0_TX, + .d0_rx_id = SHDMA_SLAVE_USB1D0_RX, + .d1_tx_id = SHDMA_SLAVE_USB1D1_TX, + .d1_rx_id = SHDMA_SLAVE_USB1D1_RX, + }, +}; + +static struct resource usbhs_resources[] = { + [0] = { + .start = 0xa4d90000, + .end = 0xa4d90124 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0xa40), + .end = evt2irq(0xa40), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs_device = { + .name = "renesas_usbhs", + .id = 1, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbhs_info, + }, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, +}; + +/* LCDC and backlight */ +static const struct fb_videomode ecovec_lcd_modes[] = { + { + .name = "Panel", + .xres = 800, + .yres = 480, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 70, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + +static const struct fb_videomode ecovec_dvi_modes[] = { + { + .name = "DVI", + .xres = 1280, + .yres = 720, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .interface_type = RGB18, .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, - .lcd_cfg = { - .sync = 0, /* hsync and vsync are active low */ - }, - .lcd_size_cfg = { /* 7.0 inch */ + .fourcc = V4L2_PIX_FMT_RGB565, + .panel_cfg = { /* 7.0 inch */ .width = 152, .height = 91, }, - .board_cfg = { - }, } }; @@ -257,7 +355,7 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 106, + .start = evt2irq(0xf40), .flags = IORESOURCE_IRQ, }, }; @@ -269,8 +367,19 @@ static struct platform_device lcdc_device = { .dev = { .platform_data = &lcdc_info, }, - .archdata = { - .hwblk_id = HWBLK_LCDC, +}; + +static struct gpio_backlight_platform_data gpio_backlight_data = { + .fbdev = &lcdc_device.dev, + .gpio = GPIO_PTR1, + .def_value = 1, + .name = "backlight", +}; + +static struct platform_device gpio_backlight_device = { + .name = "gpio-backlight", + .dev = { + .platform_data = &gpio_backlight_data, }, }; @@ -287,7 +396,7 @@ static struct resource ceu0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, + .start = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -303,9 +412,6 @@ static struct platform_device ceu0_device = { .dev = { .platform_data = &sh_mobile_ceu0_info, }, - .archdata = { - .hwblk_id = HWBLK_CEU0, - }, }; /* CEU1 */ @@ -321,7 +427,7 @@ static struct resource ceu1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 63, + .start = evt2irq(0x9e0), .flags = IORESOURCE_IRQ, }, [2] = { @@ -337,9 +443,6 @@ static struct platform_device ceu1_device = { .dev = { .platform_data = &sh_mobile_ceu1_info, }, - .archdata = { - .hwblk_id = HWBLK_CEU1, - }, }; /* I2C device */ @@ -355,7 +458,7 @@ static struct i2c_board_info i2c1_devices[] = { }, { I2C_BOARD_INFO("lis3lv02d", 0x1c), - .irq = 33, + .irq = evt2irq(0x620), } }; @@ -381,7 +484,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -394,14 +497,12 @@ static struct platform_device keysc_device = { .dev = { .platform_data = &keysc_info, }, - .archdata = { - .hwblk_id = HWBLK_KEYSC, - }, }; /* TouchScreen */ -#define IRQ0 32 -static int ts_get_pendown_state(void) +#define IRQ0 evt2irq(0x600) + +static int ts_get_pendown_state(struct device *dev) { int val = 0; gpio_free(GPIO_FN_INTC_IRQ0); @@ -422,7 +523,7 @@ static int ts_init(void) return 0; } -struct tsc2007_platform_data tsc2007_info = { +static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, .get_pendown_state = ts_get_pendown_state, @@ -436,26 +537,88 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; -#ifdef CONFIG_MFD_SH_MOBILE_SDHI -/* SHDI0 */ -static void sdhi0_set_pwr(struct platform_device *pdev, int state) +static struct regulator_consumer_supply cn12_power_consumers[] = { - gpio_set_value(GPIO_PTB6, state); -} + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn12_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers), + .consumer_supplies = cn12_power_consumers, +}; + +static struct fixed_voltage_config cn12_power_info = { + .supply_name = "CN12 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB7, + .enable_high = 1, + .init_data = &cn12_power_init_data, +}; + +static struct platform_device cn12_power = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &cn12_power_info, + }, +}; + +#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) +/* SDHI0 */ +static struct regulator_consumer_supply sdhi0_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data sdhi0_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers), + .consumer_supplies = sdhi0_power_consumers, +}; + +static struct fixed_voltage_config sdhi0_power_info = { + .supply_name = "CN11 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB6, + .enable_high = 1, + .init_data = &sdhi0_power_init_data, +}; + +static struct platform_device sdhi0_power = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdhi0_power_info, + }, +}; static struct sh_mobile_sdhi_info sdhi0_info = { - .set_pwr = sdhi0_set_pwr, + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | + MMC_CAP_NEEDS_POLL, + .tmio_flags = TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PTY7, }; static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 101, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; @@ -468,30 +631,28 @@ static struct platform_device sdhi0_device = { .dev = { .platform_data = &sdhi0_info, }, - .archdata = { - .hwblk_id = HWBLK_SDHI0, - }, }; -/* SHDI1 */ -static void sdhi1_set_pwr(struct platform_device *pdev, int state) -{ - gpio_set_value(GPIO_PTB7, state); -} - +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SDHI1 */ static struct sh_mobile_sdhi_info sdhi1_info = { - .set_pwr = sdhi1_set_pwr, + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | + MMC_CAP_NEEDS_POLL, + .tmio_flags = TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PTW7, }; static struct resource sdhi1_resources[] = { [0] = { .name = "SDHI1", .start = 0x04cf0000, - .end = 0x04cf01ff, + .end = 0x04cf00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 24, + .start = evt2irq(0x4e0), .flags = IORESOURCE_IRQ, }, }; @@ -504,35 +665,25 @@ static struct platform_device sdhi1_device = { .dev = { .platform_data = &sdhi1_info, }, - .archdata = { - .hwblk_id = HWBLK_SDHI1, - }, }; +#endif /* CONFIG_MMC_SH_MMCIF */ #else /* MMC SPI */ -static int mmc_spi_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PTY6); -} - -static int mmc_spi_get_cd(struct device *dev) -{ - return !gpio_get_value(GPIO_PTY7); -} - static void mmc_spi_setpower(struct device *dev, unsigned int maskval) { gpio_set_value(GPIO_PTB6, maskval ? 1 : 0); } static struct mmc_spi_platform_data mmc_spi_info = { - .get_ro = mmc_spi_get_ro, - .get_cd = mmc_spi_get_cd, .caps = MMC_CAP_NEEDS_POLL, + .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */ .setpower = mmc_spi_setpower, + .flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO, + .cd_gpio = GPIO_PTY7, + .ro_gpio = GPIO_PTY6, }; static struct spi_board_info spi_bus[] = { @@ -558,7 +709,7 @@ static struct resource msiof0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 84, + .start = evt2irq(0xc80), .flags = IORESOURCE_IRQ, }, }; @@ -571,9 +722,6 @@ static struct platform_device msiof0_device = { }, .num_resources = ARRAY_SIZE(msiof0_resources), .resource = msiof0_resources, - .archdata = { - .hwblk_id = HWBLK_MSIOF0, - }, }; #endif @@ -615,7 +763,6 @@ static struct soc_camera_link tw9910_link = { .bus_id = 1, .power = tw9910_power, .board_info = &i2c_camera[0], - .module_name = "tw9910", .priv = &tw9910_info, }; @@ -639,7 +786,6 @@ static struct soc_camera_link mt9t112_link1 = { .power = mt9t112_power1, .bus_id = 0, .board_info = &i2c_camera[1], - .module_name = "mt9t112", .priv = &mt9t112_info1, }; @@ -662,7 +808,6 @@ static struct soc_camera_link mt9t112_link2 = { .power = mt9t112_power2, .bus_id = 1, .board_info = &i2c_camera[2], - .module_name = "mt9t112", .priv = &mt9t112_info2, }; @@ -691,42 +836,6 @@ static struct platform_device camera_devices[] = { }; /* FSI */ -/* - * FSI-B use external clock which came from da7210. - * So, we should change parent of fsi - */ -#define FCLKBCR 0xa415000c -static void fsimck_init(struct clk *clk) -{ - u32 status = ctrl_inl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - - ctrl_outl(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimckb_clk = { - .name = "fsimckb_clk", - .id = -1, - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKBCR, - .rate = 0, /* unknown */ -}; - -struct sh_fsi_platform_info fsi_info = { - .portb_flags = SH_FSI_BRS_INV | - SH_FSI_OUT_SLAVE_MODE | - SH_FSI_IN_SLAVE_MODE | - SH_FSI_OFMT(I2S) | - SH_FSI_IFMT(I2S), -}; - static struct resource fsi_resources[] = { [0] = { .name = "FSI", @@ -735,7 +844,7 @@ static struct resource fsi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 108, + .start = evt2irq(0xf80), .flags = IORESOURCE_IRQ, }, }; @@ -745,27 +854,150 @@ static struct platform_device fsi_device = { .id = 0, .num_resources = ARRAY_SIZE(fsi_resources), .resource = fsi_resources, +}; + +static struct asoc_simple_card_info fsi_da7210_info = { + .name = "DA7210", + .card = "FSIB-DA7210", + .codec = "da7210.0-001a", + .platform = "sh_fsi.0", + .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM, + .cpu_dai = { + .name = "fsib-dai", + }, + .codec_dai = { + .name = "da7210-hifi", + }, +}; + +static struct platform_device fsi_da7210_device = { + .name = "asoc-simple-card", .dev = { - .platform_data = &fsi_info, + .platform_data = &fsi_da7210_info, + }, +}; + + +/* IrDA */ +static struct resource irda_resources[] = { + [0] = { + .name = "IrDA", + .start = 0xA45D0000, + .end = 0xA45D0049, + .flags = IORESOURCE_MEM, }, - .archdata = { - .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */ + [1] = { + .start = evt2irq(0x480), + .flags = IORESOURCE_IRQ, }, }; +static struct platform_device irda_device = { + .name = "sh_sir", + .num_resources = ARRAY_SIZE(irda_resources), + .resource = irda_resources, +}; + +#include <media/ak881x.h> +#include <media/sh_vou.h> + +static struct ak881x_pdata ak881x_pdata = { + .flags = AK881X_IF_MODE_SLAVE, +}; + +static struct i2c_board_info ak8813 = { + I2C_BOARD_INFO("ak8813", 0x20), + .platform_data = &ak881x_pdata, +}; + +static struct sh_vou_pdata sh_vou_pdata = { + .bus_fmt = SH_VOU_BUS_8BIT, + .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, + .board_info = &ak8813, + .i2c_adap = 0, +}; + +static struct resource sh_vou_resources[] = { + [0] = { + .start = 0xfe960000, + .end = 0xfe962043, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x8e0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device vou_device = { + .name = "sh-vou", + .id = -1, + .num_resources = ARRAY_SIZE(sh_vou_resources), + .resource = sh_vou_resources, + .dev = { + .platform_data = &sh_vou_pdata, + }, +}; + +#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SH_MMCIF */ +static struct resource sh_mmcif_resources[] = { + [0] = { + .name = "SH_MMCIF", + .start = 0xA4CA0000, + .end = 0xA4CA00FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* MMC2I */ + .start = evt2irq(0x5a0), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* MMC3I */ + .start = evt2irq(0x5c0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .sup_pclk = 0, /* SH7724: Max Pclk/2 */ + .caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NEEDS_POLL, + .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static struct platform_device sh_mmcif_device = { + .name = "sh_mmcif", + .id = 0, + .dev = { + .platform_data = &sh_mmcif_plat, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; +#endif + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, &sh_eth_device, &usb0_host_device, &usb1_common_device, + &usbhs_device, &lcdc_device, + &gpio_backlight_device, &ceu0_device, &ceu1_device, &keysc_device, -#ifdef CONFIG_MFD_SH_MOBILE_SDHI + &cn12_power, +#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + &sdhi0_power, &sdhi0_device, +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, +#endif #else &msiof0_device, #endif @@ -773,8 +1005,15 @@ static struct platform_device *ecovec_devices[] __initdata = { &camera_devices[1], &camera_devices[2], &fsi_device, + &fsi_da7210_device, + &irda_device, + &vou_device, +#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) + &sh_mmcif_device, +#endif }; +#ifdef CONFIG_I2C #define EEPROM_ADDR 0x50 static u8 mac_read(struct i2c_adapter *a, u8 command) { @@ -811,12 +1050,20 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd) return; } - /* read MAC address frome EEPROM */ + /* read MAC address from EEPROM */ for (i = 0; i < sizeof(pd->mac_addr); i++) { pd->mac_addr[i] = mac_read(a, 0x10 + i); msleep(10); } + + i2c_put_adapter(a); } +#else +static void __init sh_eth_init(struct sh_eth_plat_data *pd) +{ + pr_err("unable to read sh_eth MAC address\n"); +} +#endif #define PORT_HIZA 0xA4050158 #define IODRIVEA 0xA405018A @@ -829,9 +1076,11 @@ extern char ecovec24_sdram_leave_end; static int __init arch_setup(void) { struct clk *clk; + bool cn12_enabled = false; /* register board specific self-refresh code */ - sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | + SUSP_SH_RSTANDBY, &ecovec24_sdram_enter_start, &ecovec24_sdram_enter_end, &ecovec24_sdram_leave_start, @@ -855,7 +1104,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTG1, 0); gpio_direction_output(GPIO_PTG2, 0); gpio_direction_output(GPIO_PTG3, 0); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); /* enable SH-Eth */ gpio_request(GPIO_PTA1, NULL); @@ -875,16 +1124,16 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LNKSTA, NULL); /* enable USB */ - ctrl_outw(0x0000, 0xA4D80000); - ctrl_outw(0x0000, 0xA4D90000); + __raw_writew(0x0000, 0xA4D80000); + __raw_writew(0x0000, 0xA4D90000); gpio_request(GPIO_PTB3, NULL); gpio_request(GPIO_PTB4, NULL); gpio_request(GPIO_PTB5, NULL); gpio_direction_input(GPIO_PTB3); gpio_direction_output(GPIO_PTB4, 0); gpio_direction_output(GPIO_PTB5, 0); - ctrl_outw(0x0600, 0xa40501d4); - ctrl_outw(0x0600, 0xa4050192); + __raw_writew(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa4050192); if (gpio_get_value(GPIO_PTB3)) { printk(KERN_INFO "USB1 function is selected\n"); @@ -925,52 +1174,36 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LCDVSYN, NULL); gpio_request(GPIO_FN_LCDDON, NULL); gpio_request(GPIO_FN_LCDLCLK, NULL); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA); gpio_request(GPIO_PTE6, NULL); gpio_request(GPIO_PTU1, NULL); - gpio_request(GPIO_PTR1, NULL); gpio_request(GPIO_PTA2, NULL); gpio_direction_input(GPIO_PTE6); gpio_direction_output(GPIO_PTU1, 0); - gpio_direction_output(GPIO_PTR1, 0); gpio_direction_output(GPIO_PTA2, 0); /* I/O buffer drive ability is high */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); + __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); if (gpio_get_value(GPIO_PTE6)) { /* DVI */ lcdc_info.clock_source = LCDC_CLK_EXTERNAL; - lcdc_info.ch[0].clock_divider = 1, - lcdc_info.ch[0].lcd_cfg.name = "DVI"; - lcdc_info.ch[0].lcd_cfg.xres = 1280; - lcdc_info.ch[0].lcd_cfg.yres = 720; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 40; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].clock_divider = 1; + lcdc_info.ch[0].lcd_modes = ecovec_dvi_modes; + lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_dvi_modes); + + /* No backlight */ + gpio_backlight_data.fbdev = NULL; gpio_set_value(GPIO_PTA2, 1); gpio_set_value(GPIO_PTU1, 1); } else { /* Panel */ - lcdc_info.clock_source = LCDC_CLK_PERIPHERAL; - lcdc_info.ch[0].clock_divider = 2, - lcdc_info.ch[0].lcd_cfg.name = "Panel"; - lcdc_info.ch[0].lcd_cfg.xres = 800; - lcdc_info.ch[0].lcd_cfg.yres = 480; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 70; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; - - gpio_set_value(GPIO_PTR1, 1); + lcdc_info.ch[0].clock_divider = 2; + lcdc_info.ch[0].lcd_modes = ecovec_lcd_modes; + lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_lcd_modes); /* FIXME * @@ -983,7 +1216,7 @@ static int __init arch_setup(void) /* enable TouchScreen */ i2c_register_board_info(0, &ts_i2c_clients, 1); - set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW); } /* enable CEU0 */ @@ -1043,9 +1276,9 @@ static int __init arch_setup(void) gpio_direction_input(GPIO_PTR5); gpio_direction_input(GPIO_PTR6); -#ifdef CONFIG_MFD_SH_MOBILE_SDHI + /* SD-card slot CN11 */ +#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */ - gpio_request(GPIO_FN_SDHI0CD, NULL); gpio_request(GPIO_FN_SDHI0WP, NULL); gpio_request(GPIO_FN_SDHI0CMD, NULL); gpio_request(GPIO_FN_SDHI0CLK, NULL); @@ -1053,23 +1286,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI0D2, NULL); gpio_request(GPIO_FN_SDHI0D1, NULL); gpio_request(GPIO_FN_SDHI0D0, NULL); - gpio_request(GPIO_PTB6, NULL); - gpio_direction_output(GPIO_PTB6, 0); - - /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */ - gpio_request(GPIO_FN_SDHI1CD, NULL); - gpio_request(GPIO_FN_SDHI1WP, NULL); - gpio_request(GPIO_FN_SDHI1CMD, NULL); - gpio_request(GPIO_FN_SDHI1CLK, NULL); - gpio_request(GPIO_FN_SDHI1D3, NULL); - gpio_request(GPIO_FN_SDHI1D2, NULL); - gpio_request(GPIO_FN_SDHI1D1, NULL); - gpio_request(GPIO_FN_SDHI1D0, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); - - /* I/O buffer drive ability is high for SDHI1 */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1079,14 +1295,43 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTM4, 1); /* active low CS */ gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */ gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */ - gpio_request(GPIO_PTY6, NULL); /* write protect */ - gpio_direction_input(GPIO_PTY6); - gpio_request(GPIO_PTY7, NULL); /* card detect */ - gpio_direction_input(GPIO_PTY7); spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); #endif + /* MMC/SD-card slot CN12 */ +#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) + /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */ + gpio_request(GPIO_FN_MMC_D7, NULL); + gpio_request(GPIO_FN_MMC_D6, NULL); + gpio_request(GPIO_FN_MMC_D5, NULL); + gpio_request(GPIO_FN_MMC_D4, NULL); + gpio_request(GPIO_FN_MMC_D3, NULL); + gpio_request(GPIO_FN_MMC_D2, NULL); + gpio_request(GPIO_FN_MMC_D1, NULL); + gpio_request(GPIO_FN_MMC_D0, NULL); + gpio_request(GPIO_FN_MMC_CLK, NULL); + gpio_request(GPIO_FN_MMC_CMD, NULL); + + cn12_enabled = true; +#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */ + gpio_request(GPIO_FN_SDHI1WP, NULL); + gpio_request(GPIO_FN_SDHI1CMD, NULL); + gpio_request(GPIO_FN_SDHI1CLK, NULL); + gpio_request(GPIO_FN_SDHI1D3, NULL); + gpio_request(GPIO_FN_SDHI1D2, NULL); + gpio_request(GPIO_FN_SDHI1D1, NULL); + gpio_request(GPIO_FN_SDHI1D0, NULL); + + cn12_enabled = true; +#endif + + if (cn12_enabled) + /* I/O buffer drive ability is high for CN12 */ + __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000, + IODRIVEA); + /* enable Video */ gpio_request(GPIO_PTU2, NULL); gpio_direction_output(GPIO_PTU2, 1); @@ -1107,13 +1352,22 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_FSIOBLRCK, NULL); gpio_request(GPIO_FN_CLKAUDIOBO, NULL); + /* set SPU2 clock to 83.4 MHz */ + clk = clk_get(NULL, "spu_clk"); + if (!IS_ERR(clk)) { + clk_set_rate(clk, clk_round_rate(clk, 83333333)); + clk_put(clk); + } + /* change parent of FSI B */ clk = clk_get(NULL, "fsib_clk"); - clk_register(&fsimckb_clk); - clk_set_parent(clk, &fsimckb_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimckb_clk, 11000); - clk_put(clk); + if (!IS_ERR(clk)) { + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimckb_clk, 48000); + clk_set_parent(clk, &sh7724_fsimckb_clk); + clk_set_rate(clk, 48000); + clk_put(clk); + } gpio_request(GPIO_PTU0, NULL); gpio_direction_output(GPIO_PTU0, 0); @@ -1123,6 +1377,19 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_INTC_IRQ1, NULL); gpio_direction_input(GPIO_FN_INTC_IRQ1); + /* set VPU clock to 166 MHz */ + clk = clk_get(NULL, "vpu_clk"); + if (!IS_ERR(clk)) { + clk_set_rate(clk, clk_round_rate(clk, 166000000)); + clk_put(clk); + } + + /* enable IrDA */ + gpio_request(GPIO_FN_IRDA_OUT, NULL); + gpio_request(GPIO_FN_IRDA_IN, NULL); + gpio_request(GPIO_PTU5, NULL); + gpio_direction_output(GPIO_PTU5, 0); + /* enable I2C device */ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); @@ -1130,6 +1397,40 @@ static int __init arch_setup(void) i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); +#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE) + /* VOU */ + gpio_request(GPIO_FN_DV_D15, NULL); + gpio_request(GPIO_FN_DV_D14, NULL); + gpio_request(GPIO_FN_DV_D13, NULL); + gpio_request(GPIO_FN_DV_D12, NULL); + gpio_request(GPIO_FN_DV_D11, NULL); + gpio_request(GPIO_FN_DV_D10, NULL); + gpio_request(GPIO_FN_DV_D9, NULL); + gpio_request(GPIO_FN_DV_D8, NULL); + gpio_request(GPIO_FN_DV_CLKI, NULL); + gpio_request(GPIO_FN_DV_CLK, NULL); + gpio_request(GPIO_FN_DV_VSYNC, NULL); + gpio_request(GPIO_FN_DV_HSYNC, NULL); + + /* AK8813 power / reset sequence */ + gpio_request(GPIO_PTG4, NULL); + gpio_request(GPIO_PTU3, NULL); + /* Reset */ + gpio_direction_output(GPIO_PTG4, 0); + /* Power down */ + gpio_direction_output(GPIO_PTU3, 1); + + udelay(10); + + /* Power up, reset */ + gpio_set_value(GPIO_PTU3, 0); + + udelay(10); + + /* Remove reset */ + gpio_set_value(GPIO_PTG4, 1); +#endif + return platform_add_devices(ecovec_devices, ARRAY_SIZE(ecovec_devices)); } |