diff options
Diffstat (limited to 'arch/ppc/kernel/setup.c')
| -rw-r--r-- | arch/ppc/kernel/setup.c | 807 |
1 files changed, 0 insertions, 807 deletions
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c deleted file mode 100644 index c08ab432e95..00000000000 --- a/arch/ppc/kernel/setup.c +++ /dev/null @@ -1,807 +0,0 @@ -/* - * Common prep/chrp boot and setup code. - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/reboot.h> -#include <linux/delay.h> -#include <linux/initrd.h> -#include <linux/ide.h> -#include <linux/tty.h> -#include <linux/bootmem.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/cpu.h> -#include <linux/console.h> - -#include <asm/residual.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/processor.h> -#include <asm/pgtable.h> -#include <asm/bootinfo.h> -#include <asm/setup.h> -#include <asm/amigappc.h> -#include <asm/smp.h> -#include <asm/elf.h> -#include <asm/cputable.h> -#include <asm/bootx.h> -#include <asm/btext.h> -#include <asm/machdep.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/sections.h> -#include <asm/nvram.h> -#include <asm/xmon.h> -#include <asm/ocp.h> - -#define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \ - defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \ - defined(CONFIG_PPC_MPC52xx)) - -#if USES_PPC_SYS -#include <asm/ppc_sys.h> -#endif - -#if defined CONFIG_KGDB -#include <asm/kgdb.h> -#endif - -extern void platform_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); -extern void identify_cpu(unsigned long offset, unsigned long cpu); -extern void do_cpu_ftr_fixups(unsigned long offset); -extern void reloc_got2(unsigned long offset); - -extern void ppc6xx_idle(void); -extern void power4_idle(void); - -extern boot_infos_t *boot_infos; -struct ide_machdep_calls ppc_ide_md; - -/* Used with the BI_MEMSIZE bootinfo parameter to store the memory - size value reported by the boot loader. */ -unsigned long boot_mem_size; - -unsigned long ISA_DMA_THRESHOLD; -unsigned int DMA_MODE_READ; -unsigned int DMA_MODE_WRITE; - -#ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; -EXPORT_SYMBOL(_machine); - -extern void prep_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); -extern void chrp_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); - -dev_t boot_dev; -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -int have_of; -EXPORT_SYMBOL(have_of); - -#ifdef __DO_IRQ_CANON -int ppc_do_canonicalize_irqs; -EXPORT_SYMBOL(ppc_do_canonicalize_irqs); -#endif - -#ifdef CONFIG_MAGIC_SYSRQ -unsigned long SYSRQ_KEY = 0x54; -#endif /* CONFIG_MAGIC_SYSRQ */ - -#ifdef CONFIG_VGA_CONSOLE -unsigned long vgacon_remap_base; -#endif - -struct machdep_calls ppc_md; - -/* - * These are used in binfmt_elf.c to put aux entries on the stack - * for each elf executable being started. - */ -int dcache_bsize; -int icache_bsize; -int ucache_bsize; - -#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_FB_VGA16) || \ - defined(CONFIG_FB_VGA16_MODULE) || defined(CONFIG_FB_VESA) -struct screen_info screen_info = { - 0, 25, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig-video-page */ - 0, /* orig-video-mode */ - 80, /* orig-video-cols */ - 0,0,0, /* ega_ax, ega_bx, ega_cx */ - 25, /* orig-video-lines */ - 1, /* orig-video-isVGA */ - 16 /* orig-video-points */ -}; -#endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */ - -void machine_restart(char *cmd) -{ -#ifdef CONFIG_NVRAM - nvram_sync(); -#endif - ppc_md.restart(cmd); -} - -void machine_power_off(void) -{ -#ifdef CONFIG_NVRAM - nvram_sync(); -#endif - ppc_md.power_off(); -} - -void machine_halt(void) -{ -#ifdef CONFIG_NVRAM - nvram_sync(); -#endif - ppc_md.halt(); -} - -void (*pm_power_off)(void) = machine_power_off; - -#ifdef CONFIG_TAU -extern u32 cpu_temp(unsigned long cpu); -extern u32 cpu_temp_both(unsigned long cpu); -#endif /* CONFIG_TAU */ - -int show_cpuinfo(struct seq_file *m, void *v) -{ - int i = (int) v - 1; - int err = 0; - unsigned int pvr; - unsigned short maj, min; - unsigned long lpj; - - if (i >= NR_CPUS) { - /* Show summary information */ -#ifdef CONFIG_SMP - unsigned long bogosum = 0; - for (i = 0; i < NR_CPUS; ++i) - if (cpu_online(i)) - bogosum += cpu_data[i].loops_per_jiffy; - seq_printf(m, "total bogomips\t: %lu.%02lu\n", - bogosum/(500000/HZ), bogosum/(5000/HZ) % 100); -#endif /* CONFIG_SMP */ - - if (ppc_md.show_cpuinfo != NULL) - err = ppc_md.show_cpuinfo(m); - return err; - } - -#ifdef CONFIG_SMP - if (!cpu_online(i)) - return 0; - pvr = cpu_data[i].pvr; - lpj = cpu_data[i].loops_per_jiffy; -#else - pvr = mfspr(SPRN_PVR); - lpj = loops_per_jiffy; -#endif - - seq_printf(m, "processor\t: %d\n", i); - seq_printf(m, "cpu\t\t: "); - - if (cur_cpu_spec->pvr_mask) - seq_printf(m, "%s", cur_cpu_spec->cpu_name); - else - seq_printf(m, "unknown (%08x)", pvr); -#ifdef CONFIG_ALTIVEC - if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC) - seq_printf(m, ", altivec supported"); -#endif - seq_printf(m, "\n"); - -#ifdef CONFIG_TAU - if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) { -#ifdef CONFIG_TAU_AVERAGE - /* more straightforward, but potentially misleading */ - seq_printf(m, "temperature \t: %u C (uncalibrated)\n", - cpu_temp(i)); -#else - /* show the actual temp sensor range */ - u32 temp; - temp = cpu_temp_both(i); - seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n", - temp & 0xff, temp >> 16); -#endif - } -#endif /* CONFIG_TAU */ - - if (ppc_md.show_percpuinfo != NULL) { - err = ppc_md.show_percpuinfo(m, i); - if (err) - return err; - } - - /* If we are a Freescale core do a simple check so - * we dont have to keep adding cases in the future */ - if ((PVR_VER(pvr) & 0x8000) == 0x8000) { - maj = PVR_MAJ(pvr); - min = PVR_MIN(pvr); - } else { - switch (PVR_VER(pvr)) { - case 0x0020: /* 403 family */ - maj = PVR_MAJ(pvr) + 1; - min = PVR_MIN(pvr); - break; - case 0x1008: /* 740P/750P ?? */ - maj = ((pvr >> 8) & 0xFF) - 1; - min = pvr & 0xFF; - break; - default: - maj = (pvr >> 8) & 0xFF; - min = pvr & 0xFF; - break; - } - } - - seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n", - maj, min, PVR_VER(pvr), PVR_REV(pvr)); - - seq_printf(m, "bogomips\t: %lu.%02lu\n", - lpj / (500000/HZ), (lpj / (5000/HZ)) % 100); - -#if USES_PPC_SYS - if (cur_ppc_sys_spec->ppc_sys_name) - seq_printf(m, "chipset\t\t: %s\n", - cur_ppc_sys_spec->ppc_sys_name); -#endif - -#ifdef CONFIG_SMP - seq_printf(m, "\n"); -#endif - - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - int i = *pos; - - return i <= NR_CPUS? (void *) (i + 1): NULL; -} - -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} - -static void c_stop(struct seq_file *m, void *v) -{ -} - -struct seq_operations cpuinfo_op = { - .start =c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; - -/* - * We're called here very early in the boot. We determine the machine - * type and call the appropriate low-level setup functions. - * -- Cort <cort@fsmlabs.com> - * - * Note that the kernel may be running at an address which is different - * from the address that it was linked at, so we must use RELOC/PTRRELOC - * to access static data (including strings). -- paulus - */ -__init -unsigned long -early_init(int r3, int r4, int r5) -{ - unsigned long phys; - unsigned long offset = reloc_offset(); - - /* Default */ - phys = offset + KERNELBASE; - - /* First zero the BSS -- use memset, some arches don't have - * caches on yet */ - memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start); - - /* - * Identify the CPU type and fix up code sections - * that depend on which cpu we have. - */ - identify_cpu(offset, 0); - do_cpu_ftr_fixups(offset); - -#if defined(CONFIG_PPC_OF) - reloc_got2(offset); - - /* - * don't do anything on prep - * for now, don't use bootinfo because it breaks yaboot 0.5 - * and assume that if we didn't find a magic number, we have OF - */ - if (*(unsigned long *)(0) != 0xdeadc0de) - phys = prom_init(r3, r4, (prom_entry)r5); - - reloc_got2(-offset); -#endif - - return phys; -} - -#ifdef CONFIG_PPC_OF -/* - * Assume here that all clock rates are the same in a - * smp system. -- Cort - */ -int -of_show_percpuinfo(struct seq_file *m, int i) -{ - struct device_node *cpu_node; - u32 *fp; - int s; - - cpu_node = find_type_devices("cpu"); - if (!cpu_node) - return 0; - for (s = 0; s < i && cpu_node->next; s++) - cpu_node = cpu_node->next; - fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL); - if (fp) - seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000); - return 0; -} - -void __init -intuit_machine_type(void) -{ - char *model; - struct device_node *root; - - /* ask the OF info if we're a chrp or pmac */ - root = find_path_device("/"); - if (root != 0) { - /* assume pmac unless proven to be chrp -- Cort */ - _machine = _MACH_Pmac; - model = get_property(root, "device_type", NULL); - if (model && !strncmp("chrp", model, 4)) - _machine = _MACH_chrp; - else { - model = get_property(root, "model", NULL); - if (model && !strncmp(model, "IBM", 3)) - _machine = _MACH_chrp; - } - } -} -#endif - -#ifdef CONFIG_PPC_MULTIPLATFORM -/* - * The PPC_MULTIPLATFORM version of platform_init... - */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ -#ifdef CONFIG_BOOTX_TEXT - if (boot_text_mapped) { - btext_clearscreen(); - btext_welcome(); - } -#endif - - parse_bootinfo(find_bootinfo()); - - /* if we didn't get any bootinfo telling us what we are... */ - if (_machine == 0) { - /* prep boot loader tells us if we're prep or not */ - if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) ) - _machine = _MACH_prep; - } - -#ifdef CONFIG_PPC_PREP - /* not much more to do here, if prep */ - if (_machine == _MACH_prep) { - prep_init(r3, r4, r5, r6, r7); - return; - } -#endif - -#ifdef CONFIG_PPC_OF - have_of = 1; - - /* prom_init has already been called from __start */ - if (boot_infos) - relocate_nodes(); - - /* If we aren't PReP, we can find out if we're Pmac - * or CHRP with this. */ - if (_machine == 0) - intuit_machine_type(); - - /* finish_device_tree may need _machine defined. */ - finish_device_tree(); - - /* - * If we were booted via quik, r3 points to the physical - * address of the command-line parameters. - * If we were booted from an xcoff image (i.e. netbooted or - * booted from floppy), we get the command line from the - * bootargs property of the /chosen node. - * If an initial ramdisk is present, r3 and r4 - * are used for initrd_start and initrd_size, - * otherwise they contain 0xdeadbeef. - */ - if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) { - strlcpy(cmd_line, (char *)r3 + KERNELBASE, - sizeof(cmd_line)); - } else if (boot_infos != 0) { - /* booted by BootX - check for ramdisk */ - if (boot_infos->kernelParamsOffset != 0) - strlcpy(cmd_line, (char *) boot_infos - + boot_infos->kernelParamsOffset, - sizeof(cmd_line)); -#ifdef CONFIG_BLK_DEV_INITRD - if (boot_infos->ramDisk) { - initrd_start = (unsigned long) boot_infos - + boot_infos->ramDisk; - initrd_end = initrd_start + boot_infos->ramDiskSize; - initrd_below_start_ok = 1; - } -#endif - } else { - struct device_node *chosen; - char *p; - -#ifdef CONFIG_BLK_DEV_INITRD - if (r3 && r4 && r4 != 0xdeadbeef) { - if (r3 < KERNELBASE) - r3 += KERNELBASE; - initrd_start = r3; - initrd_end = r3 + r4; - ROOT_DEV = Root_RAM0; - initrd_below_start_ok = 1; - } -#endif - chosen = find_devices("chosen"); - if (chosen != NULL) { - p = get_property(chosen, "bootargs", NULL); - if (p && *p) { - strlcpy(cmd_line, p, sizeof(cmd_line)); - } - } - } -#ifdef CONFIG_ADB - if (strstr(cmd_line, "adb_sync")) { - extern int __adb_probe_sync; - __adb_probe_sync = 1; - } -#endif /* CONFIG_ADB */ - - switch (_machine) { -#ifdef CONFIG_PPC_CHRP - case _MACH_chrp: - chrp_init(r3, r4, r5, r6, r7); - break; -#endif - } -#endif /* CONFIG_PPC_OF */ -} -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -#ifdef CONFIG_PPC_OF -#ifdef CONFIG_SERIAL_CORE_CONSOLE -extern char *of_stdout_device; - -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout; - char *name; - int offset = 0; - - if (of_stdout_device == NULL) - return -ENODEV; - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) - return -EBUSY; - - prom_stdout = find_path_device(of_stdout_device); - if (!prom_stdout) - return -ENODEV; - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) - return -ENODEV; - - if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - return -ENODEV; - } - } - } else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; - else - return -ENODEV; - return add_preferred_console("ttyS", offset, NULL); -} -console_initcall(set_preferred_console); -#endif /* CONFIG_SERIAL_CORE_CONSOLE */ -#endif /* CONFIG_PPC_OF */ - -struct bi_record *find_bootinfo(void) -{ - struct bi_record *rec; - - rec = (struct bi_record *)_ALIGN((ulong)__bss_start+(1<<20)-1,(1<<20)); - if ( rec->tag != BI_FIRST ) { - /* - * This 0x10000 offset is a terrible hack but it will go away when - * we have the bootloader handle all the relocation and - * prom calls -- Cort - */ - rec = (struct bi_record *)_ALIGN((ulong)__bss_start+0x10000+(1<<20)-1,(1<<20)); - if ( rec->tag != BI_FIRST ) - return NULL; - } - return rec; -} - -void parse_bootinfo(struct bi_record *rec) -{ - if (rec == NULL || rec->tag != BI_FIRST) - return; - while (rec->tag != BI_LAST) { - ulong *data = rec->data; - switch (rec->tag) { - case BI_CMD_LINE: - strlcpy(cmd_line, (void *)data, sizeof(cmd_line)); - break; -#ifdef CONFIG_BLK_DEV_INITRD - case BI_INITRD: - initrd_start = data[0] + KERNELBASE; - initrd_end = data[0] + data[1] + KERNELBASE; - break; -#endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_MULTIPLATFORM - case BI_MACHTYPE: - /* Machine types changed with the merge. Since the - * bootinfo are now deprecated, we can just hard code - * the appropriate conversion here for when we are - * called with yaboot which passes us a machine type - * this way. - */ - switch(data[0]) { - case 1: _machine = _MACH_prep; break; - case 2: _machine = _MACH_Pmac; break; - case 4: _machine = _MACH_chrp; break; - default: - _machine = data[0]; - } - break; -#endif - case BI_MEMSIZE: - boot_mem_size = data[0]; - break; - } - rec = (struct bi_record *)((ulong)rec + rec->size); - } -} - -/* - * Find out what kind of machine we're on and save any data we need - * from the early boot process (devtree is copied on pmac by prom_init()). - * This is called very early on the boot process, after a minimal - * MMU environment has been set up but before MMU_init is called. - */ -void __init -machine_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ -#ifdef CONFIG_CMDLINE - strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line)); -#endif /* CONFIG_CMDLINE */ - -#ifdef CONFIG_6xx - ppc_md.power_save = ppc6xx_idle; -#endif -#ifdef CONFIG_POWER4 - ppc_md.power_save = power4_idle; -#endif - - platform_init(r3, r4, r5, r6, r7); - - if (ppc_md.progress) - ppc_md.progress("id mach(): done", 0x200); -} -#ifdef CONFIG_BOOKE_WDT -/* Checks wdt=x and wdt_period=xx command-line option */ -int __init early_parse_wdt(char *p) -{ - if (p && strncmp(p, "0", 1) != 0) - booke_wdt_enabled = 1; - - return 0; -} -early_param("wdt", early_parse_wdt); - -int __init early_parse_wdt_period (char *p) -{ - if (p) - booke_wdt_period = simple_strtoul(p, NULL, 0); - - return 0; -} -early_param("wdt_period", early_parse_wdt_period); -#endif /* CONFIG_BOOKE_WDT */ - -/* Checks "l2cr=xxxx" command-line option */ -int __init ppc_setup_l2cr(char *str) -{ - if (cpu_has_feature(CPU_FTR_L2CR)) { - unsigned long val = simple_strtoul(str, NULL, 0); - printk(KERN_INFO "l2cr set to %lx\n", val); - _set_L2CR(0); /* force invalidate by disable cache */ - _set_L2CR(val); /* and enable it */ - } - return 1; -} -__setup("l2cr=", ppc_setup_l2cr); - -#ifdef CONFIG_GENERIC_NVRAM - -/* Generic nvram hooks used by drivers/char/gen_nvram.c */ -unsigned char nvram_read_byte(int addr) -{ - if (ppc_md.nvram_read_val) - return ppc_md.nvram_read_val(addr); - return 0xff; -} -EXPORT_SYMBOL(nvram_read_byte); - -void nvram_write_byte(unsigned char val, int addr) -{ - if (ppc_md.nvram_write_val) - ppc_md.nvram_write_val(addr, val); -} -EXPORT_SYMBOL(nvram_write_byte); - -void nvram_sync(void) -{ - if (ppc_md.nvram_sync) - ppc_md.nvram_sync(); -} -EXPORT_SYMBOL(nvram_sync); - -#endif /* CONFIG_NVRAM */ - -static struct cpu cpu_devices[NR_CPUS]; - -int __init ppc_init(void) -{ - int i; - - /* clear the progress line */ - if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff); - - /* register CPU devices */ - for (i = 0; i < NR_CPUS; i++) - if (cpu_possible(i)) - register_cpu(&cpu_devices[i], i, NULL); - - /* call platform init */ - if (ppc_md.init != NULL) { - ppc_md.init(); - } - return 0; -} - -arch_initcall(ppc_init); - -/* Warning, IO base is not yet inited */ -void __init setup_arch(char **cmdline_p) -{ - extern char *klimit; - extern void do_init_bootmem(void); - - /* so udelay does something sensible, assume <= 1000 bogomips */ - loops_per_jiffy = 500000000 / HZ; - - if (ppc_md.init_early) - ppc_md.init_early(); - -#ifdef CONFIG_XMON - xmon_init(1); - if (strstr(cmd_line, "xmon")) - xmon(NULL); -#endif /* CONFIG_XMON */ - if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab); - -#if defined(CONFIG_KGDB) - if (ppc_md.kgdb_map_scc) - ppc_md.kgdb_map_scc(); - set_debug_traps(); - if (strstr(cmd_line, "gdb")) { - if (ppc_md.progress) - ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000); - printk("kgdb breakpoint activated\n"); - breakpoint(); - } -#endif - - /* - * Set cache line size based on type of cpu as a default. - * Systems with OF can look in the properties on the cpu node(s) - * for a possibly more accurate value. - */ - if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) { - dcache_bsize = cur_cpu_spec->dcache_bsize; - icache_bsize = cur_cpu_spec->icache_bsize; - ucache_bsize = 0; - } else - ucache_bsize = dcache_bsize = icache_bsize - = cur_cpu_spec->dcache_bsize; - - /* reboot on panic */ - panic_timeout = 180; - - init_mm.start_code = PAGE_OFFSET; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = (unsigned long) klimit; - - /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); - *cmdline_p = cmd_line; - - parse_early_param(); - - /* set up the bootmem stuff with available memory */ - do_init_bootmem(); - if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab); - -#ifdef CONFIG_PPC_OCP - /* Initialize OCP device list */ - ocp_early_init(); - if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab); -#endif - -#ifdef CONFIG_DUMMY_CONSOLE - conswitchp = &dummy_con; -#endif - - ppc_md.setup_arch(); - if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); - - paging_init(); - - /* this is for modules since _machine can be a define -- Cort */ - ppc_md.ppc_machine = _machine; -} |