aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/sysdev
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/sysdev')
-rw-r--r--arch/powerpc/sysdev/Makefile1
-rw-r--r--arch/powerpc/sysdev/bestcomm/ata.c3
-rw-r--r--arch/powerpc/sysdev/bestcomm/ata.h19
-rw-r--r--arch/powerpc/sysdev/bestcomm/bestcomm.c7
-rw-r--r--arch/powerpc/sysdev/bestcomm/bestcomm.h61
-rw-r--r--arch/powerpc/sysdev/bestcomm/bestcomm_priv.h20
-rw-r--r--arch/powerpc/sysdev/dcr-low.S8
-rw-r--r--arch/powerpc/sysdev/dcr.c5
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c11
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c241
-rw-r--r--arch/powerpc/sysdev/fsl_soc.h5
-rw-r--r--arch/powerpc/sysdev/grackle.c2
-rw-r--r--arch/powerpc/sysdev/mpic.c36
-rw-r--r--arch/powerpc/sysdev/mpic.h2
-rw-r--r--arch/powerpc/sysdev/ppc4xx_pci.c306
-rw-r--r--arch/powerpc/sysdev/qe_lib/Kconfig3
-rw-r--r--arch/powerpc/sysdev/qe_lib/gpio.c195
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c3
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc.c4
-rw-r--r--arch/powerpc/sysdev/simple_gpio.c155
-rw-r--r--arch/powerpc/sysdev/simple_gpio.h12
21 files changed, 705 insertions, 394 deletions
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 5afce115ab1..b33b28a6fe1 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
+obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
diff --git a/arch/powerpc/sysdev/bestcomm/ata.c b/arch/powerpc/sysdev/bestcomm/ata.c
index 1f5258fb38c..901c9f91e5d 100644
--- a/arch/powerpc/sysdev/bestcomm/ata.c
+++ b/arch/powerpc/sysdev/bestcomm/ata.c
@@ -61,6 +61,9 @@ bcom_ata_init(int queue_len, int maxbufsize)
struct bcom_ata_var *var;
struct bcom_ata_inc *inc;
+ /* Prefetch breaks ATA DMA. Turn it off for ATA DMA */
+ bcom_disable_prefetch();
+
tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_ata_bd), 0);
if (!tsk)
return NULL;
diff --git a/arch/powerpc/sysdev/bestcomm/ata.h b/arch/powerpc/sysdev/bestcomm/ata.h
index 10982769c46..0b237181133 100644
--- a/arch/powerpc/sysdev/bestcomm/ata.h
+++ b/arch/powerpc/sysdev/bestcomm/ata.h
@@ -16,22 +16,15 @@
struct bcom_ata_bd {
u32 status;
- u32 dst_pa;
u32 src_pa;
+ u32 dst_pa;
};
-extern struct bcom_task *
-bcom_ata_init(int queue_len, int maxbufsize);
-
-extern void
-bcom_ata_rx_prepare(struct bcom_task *tsk);
-
-extern void
-bcom_ata_tx_prepare(struct bcom_task *tsk);
-
-extern void
-bcom_ata_reset_bd(struct bcom_task *tsk);
-
+extern struct bcom_task * bcom_ata_init(int queue_len, int maxbufsize);
+extern void bcom_ata_rx_prepare(struct bcom_task *tsk);
+extern void bcom_ata_tx_prepare(struct bcom_task *tsk);
+extern void bcom_ata_reset_bd(struct bcom_task *tsk);
+extern void bcom_ata_release(struct bcom_task *tsk);
#endif /* __BESTCOMM_ATA_H__ */
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index 446c9ea85b3..378ebd9aac1 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -279,7 +279,6 @@ bcom_engine_init(void)
int task;
phys_addr_t tdt_pa, ctx_pa, var_pa, fdt_pa;
unsigned int tdt_size, ctx_size, var_size, fdt_size;
- u16 regval;
/* Allocate & clear SRAM zones for FDT, TDTs, contexts and vars/incs */
tdt_size = BCOM_MAX_TASKS * sizeof(struct bcom_tdt);
@@ -331,10 +330,8 @@ bcom_engine_init(void)
out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ALWAYS], BCOM_IPR_ALWAYS);
/* Disable COMM Bus Prefetch on the original 5200; it's broken */
- if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR) {
- regval = in_be16(&bcom_eng->regs->PtdCntrl);
- out_be16(&bcom_eng->regs->PtdCntrl, regval | 1);
- }
+ if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR)
+ bcom_disable_prefetch();
/* Init lock */
spin_lock_init(&bcom_eng->lock);
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.h b/arch/powerpc/sysdev/bestcomm/bestcomm.h
index c960a8b4965..23a95f80dfd 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.h
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.h
@@ -16,8 +16,19 @@
#ifndef __BESTCOMM_H__
#define __BESTCOMM_H__
-struct bcom_bd; /* defined later on ... */
-
+/**
+ * struct bcom_bd - Structure describing a generic BestComm buffer descriptor
+ * @status: The current status of this buffer. Exact meaning depends on the
+ * task type
+ * @data: An array of u32 extra data. Size of array is task dependant.
+ *
+ * Note: Don't dereference a bcom_bd pointer as an array. The size of the
+ * bcom_bd is variable. Use bcom_get_bd() instead.
+ */
+struct bcom_bd {
+ u32 status;
+ u32 data[0]; /* variable payload size */
+};
/* ======================================================================== */
/* Generic task management */
@@ -84,17 +95,6 @@ bcom_get_task_irq(struct bcom_task *tsk) {
/* BD based tasks helpers */
/* ======================================================================== */
-/**
- * struct bcom_bd - Structure describing a generic BestComm buffer descriptor
- * @status: The current status of this buffer. Exact meaning depends on the
- * task type
- * @data: An array of u32 whose meaning depends on the task type.
- */
-struct bcom_bd {
- u32 status;
- u32 data[1]; /* variable, but at least 1 */
-};
-
#define BCOM_BD_READY 0x40000000ul
/** _bcom_next_index - Get next input index.
@@ -140,15 +140,31 @@ bcom_queue_full(struct bcom_task *tsk)
}
/**
+ * bcom_get_bd - Get a BD from the queue
+ * @tsk: The BestComm task structure
+ * index: Index of the BD to fetch
+ */
+static inline struct bcom_bd
+*bcom_get_bd(struct bcom_task *tsk, unsigned int index)
+{
+ /* A cast to (void*) so the address can be incremented by the
+ * real size instead of by sizeof(struct bcom_bd) */
+ return ((void *)tsk->bd) + (index * tsk->bd_size);
+}
+
+/**
* bcom_buffer_done - Checks if a BestComm
* @tsk: The BestComm task structure
*/
static inline int
bcom_buffer_done(struct bcom_task *tsk)
{
+ struct bcom_bd *bd;
if (bcom_queue_empty(tsk))
return 0;
- return !(tsk->bd[tsk->outdex].status & BCOM_BD_READY);
+
+ bd = bcom_get_bd(tsk, tsk->outdex);
+ return !(bd->status & BCOM_BD_READY);
}
/**
@@ -160,16 +176,21 @@ bcom_buffer_done(struct bcom_task *tsk)
static inline struct bcom_bd *
bcom_prepare_next_buffer(struct bcom_task *tsk)
{
- tsk->bd[tsk->index].status = 0; /* cleanup last status */
- return &tsk->bd[tsk->index];
+ struct bcom_bd *bd;
+
+ bd = bcom_get_bd(tsk, tsk->index);
+ bd->status = 0; /* cleanup last status */
+ return bd;
}
static inline void
bcom_submit_next_buffer(struct bcom_task *tsk, void *cookie)
{
+ struct bcom_bd *bd = bcom_get_bd(tsk, tsk->index);
+
tsk->cookie[tsk->index] = cookie;
mb(); /* ensure the bd is really up-to-date */
- tsk->bd[tsk->index].status |= BCOM_BD_READY;
+ bd->status |= BCOM_BD_READY;
tsk->index = _bcom_next_index(tsk);
if (tsk->flags & BCOM_FLAGS_ENABLE_TASK)
bcom_enable(tsk);
@@ -179,10 +200,12 @@ static inline void *
bcom_retrieve_buffer(struct bcom_task *tsk, u32 *p_status, struct bcom_bd **p_bd)
{
void *cookie = tsk->cookie[tsk->outdex];
+ struct bcom_bd *bd = bcom_get_bd(tsk, tsk->outdex);
+
if (p_status)
- *p_status = tsk->bd[tsk->outdex].status;
+ *p_status = bd->status;
if (p_bd)
- *p_bd = &tsk->bd[tsk->outdex];
+ *p_bd = bd;
tsk->outdex = _bcom_next_outdex(tsk);
return cookie;
}
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h
index 866a2915ef2..eb0d1c883c3 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h
@@ -198,8 +198,8 @@ struct bcom_task_header {
#define BCOM_IPR_SCTMR_1 2
#define BCOM_IPR_FEC_RX 6
#define BCOM_IPR_FEC_TX 5
-#define BCOM_IPR_ATA_RX 4
-#define BCOM_IPR_ATA_TX 3
+#define BCOM_IPR_ATA_RX 7
+#define BCOM_IPR_ATA_TX 7
#define BCOM_IPR_SCPCI_RX 2
#define BCOM_IPR_SCPCI_TX 2
#define BCOM_IPR_PSC3_RX 2
@@ -241,6 +241,22 @@ extern void bcom_set_initiator(int task, int initiator);
#define TASK_ENABLE 0x8000
+/**
+ * bcom_disable_prefetch - Hook to disable bus prefetching
+ *
+ * ATA DMA and the original MPC5200 need this due to silicon bugs. At the
+ * moment disabling prefetch is a one-way street. There is no mechanism
+ * in place to turn prefetch back on after it has been disabled. There is
+ * no reason it couldn't be done, it would just be more complex to implement.
+ */
+static inline void bcom_disable_prefetch(void)
+{
+ u16 regval;
+
+ regval = in_be16(&bcom_eng->regs->PtdCntrl);
+ out_be16(&bcom_eng->regs->PtdCntrl, regval | 1);
+};
+
static inline void
bcom_enable_task(int task)
{
diff --git a/arch/powerpc/sysdev/dcr-low.S b/arch/powerpc/sysdev/dcr-low.S
index 2078f39e2f1..d3098ef1404 100644
--- a/arch/powerpc/sysdev/dcr-low.S
+++ b/arch/powerpc/sysdev/dcr-low.S
@@ -11,14 +11,20 @@
#include <asm/ppc_asm.h>
#include <asm/processor.h>
+#include <asm/bug.h>
#define DCR_ACCESS_PROLOG(table) \
+ cmpli cr0,r3,1024; \
rlwinm r3,r3,4,18,27; \
lis r5,table@h; \
ori r5,r5,table@l; \
add r3,r3,r5; \
+ bge- 1f; \
mtctr r3; \
- bctr
+ bctr; \
+1: trap; \
+ EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0; \
+ blr
_GLOBAL(__mfdcr)
DCR_ACCESS_PROLOG(__mfdcr_table)
diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c
index a8ba9983dd5..bb44aa9fd47 100644
--- a/arch/powerpc/sysdev/dcr.c
+++ b/arch/powerpc/sysdev/dcr.c
@@ -124,7 +124,8 @@ EXPORT_SYMBOL_GPL(dcr_write_generic);
#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
-unsigned int dcr_resource_start(struct device_node *np, unsigned int index)
+unsigned int dcr_resource_start(const struct device_node *np,
+ unsigned int index)
{
unsigned int ds;
const u32 *dr = of_get_property(np, "dcr-reg", &ds);
@@ -136,7 +137,7 @@ unsigned int dcr_resource_start(struct device_node *np, unsigned int index)
}
EXPORT_SYMBOL_GPL(dcr_resource_start);
-unsigned int dcr_resource_len(struct device_node *np, unsigned int index)
+unsigned int dcr_resource_len(const struct device_node *np, unsigned int index)
{
unsigned int ds;
const u32 *dr = of_get_property(np, "dcr-reg", &ds);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 5b264eb4b1f..f611d0369cc 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -29,7 +29,8 @@
#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
/* atmu setup for fsl pci/pcie controller */
-void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
+static void __init setup_pci_atmu(struct pci_controller *hose,
+ struct resource *rsrc)
{
struct ccsr_pci __iomem *pci;
int i;
@@ -86,7 +87,7 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
out_be32(&pci->piw[2].piwar, PIWAR_2G);
}
-void __init setup_pci_cmd(struct pci_controller *hose)
+static void __init setup_pci_cmd(struct pci_controller *hose)
{
u16 cmd;
int cap_x;
@@ -130,7 +131,7 @@ static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
return ;
}
-int __init fsl_pcie_check_link(struct pci_controller *hose)
+static int __init fsl_pcie_check_link(struct pci_controller *hose)
{
u32 val;
early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
@@ -187,7 +188,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
- ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+ ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
@@ -300,7 +301,7 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
" bus 0\n", dev->full_name);
}
- ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+ ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 26ecb96f973..115cb16351f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -207,236 +207,51 @@ static int __init of_add_fixed_phys(void)
arch_initcall(of_add_fixed_phys);
#endif /* CONFIG_FIXED_PHY */
-static int gfar_mdio_of_init_one(struct device_node *np)
-{
- int k;
- struct device_node *child = NULL;
- struct gianfar_mdio_data mdio_data;
- struct platform_device *mdio_dev;
- struct resource res;
- int ret;
-
- memset(&res, 0, sizeof(res));
- memset(&mdio_data, 0, sizeof(mdio_data));
-
- ret = of_address_to_resource(np, 0, &res);
- if (ret)
- return ret;
-
- /* The gianfar device will try to use the same ID created below to find
- * this bus, to coordinate register access (since they share). */
- mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
- res.start&0xfffff, &res, 1);
- if (IS_ERR(mdio_dev))
- return PTR_ERR(mdio_dev);
-
- for (k = 0; k < 32; k++)
- mdio_data.irq[k] = PHY_POLL;
-
- while ((child = of_get_next_child(np, child)) != NULL) {
- int irq = irq_of_parse_and_map(child, 0);
- if (irq != NO_IRQ) {
- const u32 *id = of_get_property(child, "reg", NULL);
- mdio_data.irq[*id] = irq;
- }
- }
-
- ret = platform_device_add_data(mdio_dev, &mdio_data,
- sizeof(struct gianfar_mdio_data));
- if (ret)
- platform_device_unregister(mdio_dev);
-
- return ret;
-}
-
-static int __init gfar_mdio_of_init(void)
-{
- struct device_node *np = NULL;
-
- for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
- gfar_mdio_of_init_one(np);
-
- /* try the deprecated version */
- for_each_compatible_node(np, "mdio", "gianfar");
- gfar_mdio_of_init_one(np);
-
- return 0;
-}
-
-arch_initcall(gfar_mdio_of_init);
-
-static const char *gfar_tx_intr = "tx";
-static const char *gfar_rx_intr = "rx";
-static const char *gfar_err_intr = "error";
-
-static int __init gfar_of_init(void)
+#ifdef CONFIG_PPC_83xx
+static int __init mpc83xx_wdt_init(void)
{
+ struct resource r;
struct device_node *np;
- unsigned int i;
- struct platform_device *gfar_dev;
- struct resource res;
+ struct platform_device *dev;
+ u32 freq = fsl_get_sys_freq();
int ret;
- for (np = NULL, i = 0;
- (np = of_find_compatible_node(np, "network", "gianfar")) != NULL;
- i++) {
- struct resource r[4];
- struct device_node *phy, *mdio;
- struct gianfar_platform_data gfar_data;
- const unsigned int *id;
- const char *model;
- const char *ctype;
- const void *mac_addr;
- const phandle *ph;
- int n_res = 2;
-
- if (!of_device_is_available(np))
- continue;
-
- memset(r, 0, sizeof(r));
- memset(&gfar_data, 0, sizeof(gfar_data));
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto err;
-
- of_irq_to_resource(np, 0, &r[1]);
-
- model = of_get_property(np, "model", NULL);
-
- /* If we aren't the FEC we have multiple interrupts */
- if (model && strcasecmp(model, "FEC")) {
- r[1].name = gfar_tx_intr;
-
- r[2].name = gfar_rx_intr;
- of_irq_to_resource(np, 1, &r[2]);
+ np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
- r[3].name = gfar_err_intr;
- of_irq_to_resource(np, 2, &r[3]);
-
- n_res += 2;
- }
-
- gfar_dev =
- platform_device_register_simple("fsl-gianfar", i, &r[0],
- n_res);
-
- if (IS_ERR(gfar_dev)) {
- ret = PTR_ERR(gfar_dev);
- goto err;
- }
-
- mac_addr = of_get_mac_address(np);
- if (mac_addr)
- memcpy(gfar_data.mac_addr, mac_addr, 6);
-
- if (model && !strcasecmp(model, "TSEC"))
- gfar_data.device_flags =
- FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE |
- FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR;
- if (model && !strcasecmp(model, "eTSEC"))
- gfar_data.device_flags =
- FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE |
- FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR |
- FSL_GIANFAR_DEV_HAS_CSUM |
- FSL_GIANFAR_DEV_HAS_VLAN |
- FSL_GIANFAR_DEV_HAS_EXTENDED_HASH;
-
- ctype = of_get_property(np, "phy-connection-type", NULL);
-
- /* We only care about rgmii-id. The rest are autodetected */
- if (ctype && !strcmp(ctype, "rgmii-id"))
- gfar_data.interface = PHY_INTERFACE_MODE_RGMII_ID;
- else
- gfar_data.interface = PHY_INTERFACE_MODE_MII;
-
- if (of_get_property(np, "fsl,magic-packet", NULL))
- gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
-
- ph = of_get_property(np, "phy-handle", NULL);
- if (ph == NULL) {
- u32 *fixed_link;
-
- fixed_link = (u32 *)of_get_property(np, "fixed-link",
- NULL);
- if (!fixed_link) {
- ret = -ENODEV;
- goto unreg;
- }
-
- snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0");
- gfar_data.phy_id = fixed_link[0];
- } else {
- phy = of_find_node_by_phandle(*ph);
-
- if (phy == NULL) {
- ret = -ENODEV;
- goto unreg;
- }
-
- mdio = of_get_parent(phy);
-
- id = of_get_property(phy, "reg", NULL);
- ret = of_address_to_resource(mdio, 0, &res);
- if (ret) {
- of_node_put(phy);
- of_node_put(mdio);
- goto unreg;
- }
-
- gfar_data.phy_id = *id;
- snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
- (unsigned long long)res.start&0xfffff);
+ if (!np) {
+ ret = -ENODEV;
+ goto nodev;
+ }
- of_node_put(phy);
- of_node_put(mdio);
- }
+ memset(&r, 0, sizeof(r));
- /* Get MDIO bus controlled by this eTSEC, if any. Normally only
- * eTSEC 1 will control an MDIO bus, not necessarily the same
- * bus that its PHY is on ('mdio' above), so we can't just use
- * that. What we do is look for a gianfar mdio device that has
- * overlapping registers with this device. That's really the
- * whole point, to find the device sharing our registers to
- * coordinate access with it.
- */
- for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") {
- if (of_address_to_resource(mdio, 0, &res))
- continue;
-
- if (res.start >= r[0].start && res.end <= r[0].end) {
- /* Get the ID the mdio bus platform device was
- * registered with. gfar_data.bus_id is
- * different because it's for finding a PHY,
- * while this is for finding a MII bus.
- */
- gfar_data.mdio_bus = res.start&0xfffff;
- of_node_put(mdio);
- break;
- }
- }
+ ret = of_address_to_resource(np, 0, &r);
+ if (ret)
+ goto err;
- ret =
- platform_device_add_data(gfar_dev, &gfar_data,
- sizeof(struct
- gianfar_platform_data));
- if (ret)
- goto unreg;
+ dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
+ if (IS_ERR(dev)) {
+ ret = PTR_ERR(dev);
+ goto err;
}
+ ret = platform_device_add_data(dev, &freq, sizeof(freq));
+ if (ret)
+ goto unreg;
+
+ of_node_put(np);
return 0;
unreg:
- platform_device_unregister(gfar_dev);
+ platform_device_unregister(dev);
err:
+ of_node_put(np);
+nodev:
return ret;
}
-arch_initcall(gfar_of_init);
+arch_initcall(mpc83xx_wdt_init);
+#endif
static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
{
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 60f7f227327..9c744e4285a 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -5,8 +5,13 @@
#include <asm/mmu.h>
extern phys_addr_t get_immrbase(void);
+#if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx)
extern u32 get_brgfreq(void);
extern u32 get_baudrate(void);
+#else
+static inline u32 get_brgfreq(void) { return -1; }
+static inline u32 get_baudrate(void) { return -1; }
+#endif
extern u32 fsl_get_sys_freq(void);
struct spi_board_info;
diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c
index d502927644c..5da37c2f22e 100644
--- a/arch/powerpc/sysdev/grackle.c
+++ b/arch/powerpc/sysdev/grackle.c
@@ -57,7 +57,7 @@ void __init setup_grackle(struct pci_controller *hose)
{
setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
if (machine_is_compatible("PowerMac1,1"))
- ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+ ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
if (machine_is_compatible("AAPL,PowerBook1998"))
grackle_set_loop_snoop(hose, 1);
#if 0 /* Disabled for now, HW problems ??? */
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 1890fb085cd..3e0d89dcdba 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -661,17 +661,6 @@ static inline void mpic_eoi(struct mpic *mpic)
(void)mpic_cpu_read(MPIC_INFO(CPU_WHOAMI));
}
-#ifdef CONFIG_SMP
-static irqreturn_t mpic_ipi_action(int irq, void *data)
-{
- long ipi = (long)data;
-
- smp_message_recv(ipi);
-
- return IRQ_HANDLED;
-}
-#endif /* CONFIG_SMP */
-
/*
* Linux descriptor level callbacks
*/
@@ -817,7 +806,7 @@ static void mpic_end_ipi(unsigned int irq)
#endif /* CONFIG_SMP */
-void mpic_set_affinity(unsigned int irq, cpumask_t cpumask)
+void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
{
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = mpic_irq_to_hw(irq);
@@ -829,7 +818,7 @@ void mpic_set_affinity(unsigned int irq, cpumask_t cpumask)
} else {
cpumask_t tmp;
- cpus_and(tmp, cpumask, cpu_online_map);
+ cpumask_and(&tmp, cpumask, cpu_online_mask);
mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
mpic_physmask(cpus_addr(tmp)[0]));
@@ -1548,13 +1537,7 @@ unsigned int mpic_get_mcirq(void)
void mpic_request_ipis(void)
{
struct mpic *mpic = mpic_primary;
- long i, err;
- static char *ipi_names[] = {
- "IPI0 (call function)",
- "IPI1 (reschedule)",
- "IPI2 (call function single)",
- "IPI3 (debugger break)",
- };
+ int i;
BUG_ON(mpic == NULL);
printk(KERN_INFO "mpic: requesting IPIs ... \n");
@@ -1563,17 +1546,10 @@ void mpic_request_ipis(void)
unsigned int vipi = irq_create_mapping(mpic->irqhost,
mpic->ipi_vecs[0] + i);
if (vipi == NO_IRQ) {
- printk(KERN_ERR "Failed to map IPI %ld\n", i);
- break;
- }
- err = request_irq(vipi, mpic_ipi_action,
- IRQF_DISABLED|IRQF_PERCPU,
- ipi_names[i], (void *)i);
- if (err) {
- printk(KERN_ERR "Request of irq %d for IPI %ld failed\n",
- vipi, i);
- break;
+ printk(KERN_ERR "Failed to map %s\n", smp_ipi_name[i]);
+ continue;
}
+ smp_request_message_ipi(vipi, i);
}
}
diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h
index 6209c62a426..3cef2af10f4 100644
--- a/arch/powerpc/sysdev/mpic.h
+++ b/arch/powerpc/sysdev/mpic.h
@@ -36,6 +36,6 @@ static inline int mpic_pasemi_msi_init(struct mpic *mpic)
extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type);
extern void mpic_set_vector(unsigned int virq, unsigned int vector);
-extern void mpic_set_affinity(unsigned int irq, cpumask_t cpumask);
+extern void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
#endif /* _POWERPC_SYSDEV_MPIC_H */
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index d3e4d61030b..77fae5f64f2 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -194,11 +194,41 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
* 4xx PCI 2.x part
*/
+static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller *hose,
+ void __iomem *reg,
+ u64 plb_addr,
+ u64 pci_addr,
+ u64 size,
+ unsigned int flags,
+ int index)
+{
+ u32 ma, pcila, pciha;
+
+ if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
+ size < 0x1000 || (plb_addr & (size - 1)) != 0) {
+ printk(KERN_WARNING "%s: Resource out of range\n",
+ hose->dn->full_name);
+ return -1;
+ }
+ ma = (0xffffffffu << ilog2(size)) | 1;
+ if (flags & IORESOURCE_PREFETCH)
+ ma |= 2;
+
+ pciha = RES_TO_U32_HIGH(pci_addr);
+ pcila = RES_TO_U32_LOW(pci_addr);
+
+ writel(plb_addr, reg + PCIL0_PMM0LA + (0x10 * index));
+ writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * index));
+ writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * index));
+ writel(ma, reg + PCIL0_PMM0MA + (0x10 * index));
+
+ return 0;
+}
+
static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,
void __iomem *reg)
{
- u32 la, ma, pcila, pciha;
- int i, j;
+ int i, j, found_isa_hole = 0;
/* Setup outbound memory windows */
for (i = j = 0; i < 3; i++) {
@@ -213,28 +243,29 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,
break;
}
- /* Calculate register values */
- la = res->start;
- pciha = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
- pcila = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
-
- ma = res->end + 1 - res->start;
- if (!is_power_of_2(ma) || ma < 0x1000 || ma > 0xffffffffu) {
- printk(KERN_WARNING "%s: Resource out of range\n",
- hose->dn->full_name);
- continue;
+ /* Configure the resource */
+ if (ppc4xx_setup_one_pci_PMM(hose, reg,
+ res->start,
+ res->start - hose->pci_mem_offset,
+ res->end + 1 - res->start,
+ res->flags,
+ j) == 0) {
+ j++;
+
+ /* If the resource PCI address is 0 then we have our
+ * ISA memory hole
+ */
+ if (res->start == hose->pci_mem_offset)
+ found_isa_hole = 1;
}
- ma = (0xffffffffu << ilog2(ma)) | 0x1;
- if (res->flags & IORESOURCE_PREFETCH)
- ma |= 0x2;
-
- /* Program register values */
- writel(la, reg + PCIL0_PMM0LA + (0x10 * j));
- writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * j));
- writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * j));
- writel(ma, reg + PCIL0_PMM0MA + (0x10 * j));
- j++;
}
+
+ /* Handle ISA memory hole if not already covered */
+ if (j <= 2 && !found_isa_hole && hose->isa_mem_size)
+ if (ppc4xx_setup_one_pci_PMM(hose, reg, hose->isa_mem_phys, 0,
+ hose->isa_mem_size, 0, j) == 0)
+ printk(KERN_INFO "%s: Legacy ISA memory support enabled\n",
+ hose->dn->full_name);
}
static void __init ppc4xx_configure_pci_PTMs(struct pci_controller *hose,
@@ -352,11 +383,52 @@ static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
* 4xx PCI-X part
*/
+static int __init ppc4xx_setup_one_pcix_POM(struct pci_controller *hose,
+ void __iomem *reg,
+ u64 plb_addr,
+ u64 pci_addr,
+ u64 size,
+ unsigned int flags,
+ int index)
+{
+ u32 lah, lal, pciah, pcial, sa;
+
+ if (!is_power_of_2(size) || size < 0x1000 ||
+ (plb_addr & (size - 1)) != 0) {
+ printk(KERN_WARNING "%s: Resource out of range\n",
+ hose->dn->full_name);
+ return -1;
+ }
+
+ /* Calculate register values */
+ lah = RES_TO_U32_HIGH(plb_addr);
+ lal = RES_TO_U32_LOW(plb_addr);
+ pciah = RES_TO_U32_HIGH(pci_addr);
+ pcial = RES_TO_U32_LOW(pci_addr);
+ sa = (0xffffffffu << ilog2(size)) | 0x1;
+
+ /* Program register values */
+ if (index == 0) {
+ writel(lah, reg + PCIX0_POM0LAH);
+ writel(lal, reg + PCIX0_POM0LAL);
+ writel(pciah, reg + PCIX0_POM0PCIAH);
+ writel(pcial, reg + PCIX0_POM0PCIAL);
+ writel(sa, reg + PCIX0_POM0SA);
+ } else {
+ writel(lah, reg + PCIX0_POM1LAH);
+ writel(lal, reg + PCIX0_POM1LAL);
+ writel(pciah, reg + PCIX0_POM1PCIAH);
+ writel(pcial, reg + PCIX0_POM1PCIAL);
+ writel(sa, reg + PCIX0_POM1SA);
+ }
+
+ return 0;
+}
+
static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,
void __iomem *reg)
{
- u32 lah, lal, pciah, pcial, sa;
- int i, j;
+ int i, j, found_isa_hole = 0;
/* Setup outbound memory windows */
for (i = j = 0; i < 3; i++) {
@@ -371,36 +443,29 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,
break;
}
- /* Calculate register values */
- lah = RES_TO_U32_HIGH(res->start);
- lal = RES_TO_U32_LOW(res->start);
- pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
- pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
- sa = res->end + 1 - res->start;
- if (!is_power_of_2(sa) || sa < 0x100000 ||
- sa > 0xffffffffu) {
- printk(KERN_WARNING "%s: Resource out of range\n",
- hose->dn->full_name);
- continue;
+ /* Configure the resource */
+ if (ppc4xx_setup_one_pcix_POM(hose, reg,
+ res->start,
+ res->start - hose->pci_mem_offset,
+ res->end + 1 - res->start,
+ res->flags,
+ j) == 0) {
+ j++;
+
+ /* If the resource PCI address is 0 then we have our
+ * ISA memory hole
+ */
+ if (res->start == hose->pci_mem_offset)
+ found_isa_hole = 1;
}
- sa = (0xffffffffu << ilog2(sa)) | 0x1;
-
- /* Program register values */
- if (j == 0) {
- writel(lah, reg + PCIX0_POM0LAH);
- writel(lal, reg + PCIX0_POM0LAL);
- writel(pciah, reg + PCIX0_POM0PCIAH);
- writel(pcial, reg + PCIX0_POM0PCIAL);
- writel(sa, reg + PCIX0_POM0SA);
- } else {
- writel(lah, reg + PCIX0_POM1LAH);
- writel(lal, reg + PCIX0_POM1LAL);
- writel(pciah, reg + PCIX0_POM1PCIAH);
- writel(pcial, reg + PCIX0_POM1PCIAL);
- writel(sa, reg + PCIX0_POM1SA);
- }
- j++;
}
+
+ /* Handle ISA memory hole if not already covered */
+ if (j <= 1 && !found_isa_hole && hose->isa_mem_size)
+ if (ppc4xx_setup_one_pcix_POM(hose, reg, hose->isa_mem_phys, 0,
+ hose->isa_mem_size, 0, j) == 0)
+ printk(KERN_INFO "%s: Legacy ISA memory support enabled\n",
+ hose->dn->full_name);
}
static void __init ppc4xx_configure_pcix_PIMs(struct pci_controller *hose,
@@ -1317,12 +1382,72 @@ static struct pci_ops ppc4xx_pciex_pci_ops =
.write = ppc4xx_pciex_write_config,
};
+static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port,
+ struct pci_controller *hose,
+ void __iomem *mbase,
+ u64 plb_addr,
+ u64 pci_addr,
+ u64 size,
+ unsigned int flags,
+ int index)
+{
+ u32 lah, lal, pciah, pcial, sa;
+
+ if (!is_power_of_2(size) ||
+ (index < 2 && size < 0x100000) ||
+ (index == 2 && size < 0x100) ||
+ (plb_addr & (size - 1)) != 0) {
+ printk(KERN_WARNING "%s: Resource out of range\n",
+ hose->dn->full_name);
+ return -1;
+ }
+
+ /* Calculate register values */
+ lah = RES_TO_U32_HIGH(plb_addr);
+ lal = RES_TO_U32_LOW(plb_addr);
+ pciah = RES_TO_U32_HIGH(pci_addr);
+ pcial = RES_TO_U32_LOW(pci_addr);
+ sa = (0xffffffffu << ilog2(size)) | 0x1;
+
+ /* Program register values */
+ switch (index) {
+ case 0:
+ out_le32(mbase + PECFG_POM0LAH, pciah);
+ out_le32(mbase + PECFG_POM0LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
+ /* Note that 3 here means enabled | single region */
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
+ break;
+ case 1:
+ out_le32(mbase + PECFG_POM1LAH, pciah);
+ out_le32(mbase + PECFG_POM1LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
+ /* Note that 3 here means enabled | single region */
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
+ break;
+ case 2:
+ out_le32(mbase + PECFG_POM2LAH, pciah);
+ out_le32(mbase + PECFG_POM2LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
+ /* Note that 3 here means enabled | IO space !!! */
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, sa | 3);
+ break;
+ }
+
+ return 0;
+}
+
static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
struct pci_controller *hose,
void __iomem *mbase)
{
- u32 lah, lal, pciah, pcial, sa;
- int i, j;
+ int i, j, found_isa_hole = 0;
/* Setup outbound memory windows */
for (i = j = 0; i < 3; i++) {
@@ -1337,53 +1462,38 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
break;
}
- /* Calculate register values */
- lah = RES_TO_U32_HIGH(res->start);
- lal = RES_TO_U32_LOW(res->start);
- pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
- pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
- sa = res->end + 1 - res->start;
- if (!is_power_of_2(sa) || sa < 0x100000 ||
- sa > 0xffffffffu) {
- printk(KERN_WARNING "%s: Resource out of range\n",
- port->node->full_name);
- continue;
- }
- sa = (0xffffffffu << ilog2(sa)) | 0x1;
-
- /* Program register values */
- switch (j) {
- case 0:
- out_le32(mbase + PECFG_POM0LAH, pciah);
- out_le32(mbase + PECFG_POM0LAL, pcial);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
- break;
- case 1:
- out_le32(mbase + PECFG_POM1LAH, pciah);
- out_le32(mbase + PECFG_POM1LAL, pcial);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
- break;
+ /* Configure the resource */
+ if (ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+ res->start,
+ res->start - hose->pci_mem_offset,
+ res->end + 1 - res->start,
+ res->flags,
+ j) == 0) {
+ j++;
+
+ /* If the resource PCI address is 0 then we have our
+ * ISA memory hole
+ */
+ if (res->start == hose->pci_mem_offset)
+ found_isa_hole = 1;
}
- j++;
}
- /* Configure IO, always 64K starting at 0 */
- if (hose->io_resource.flags & IORESOURCE_IO) {
- lah = RES_TO_U32_HIGH(hose->io_base_phys);
- lal = RES_TO_U32_LOW(hose->io_base_phys);
- out_le32(mbase + PECFG_POM2LAH, 0);
- out_le32(mbase + PECFG_POM2LAL, 0);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAH, lah);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
- dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0xffff0000 | 3);
- }
+ /* Handle ISA memory hole if not already covered */
+ if (j <= 1 && !found_isa_hole && hose->isa_mem_size)
+ if (ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+ hose->isa_mem_phys, 0,
+ hose->isa_mem_size, 0, j) == 0)
+ printk(KERN_INFO "%s: Legacy ISA memory support enabled\n",
+ hose->dn->full_name);
+
+ /* Configure IO, always 64K starting at 0. We hard wire it to 64K !
+ * Note also that it -has- to be region index 2 on this HW
+ */
+ if (hose->io_resource.flags & IORESOURCE_IO)
+ ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+ hose->io_base_phys, 0,
+ 0x10000, IORESOURCE_IO, 2);
}
static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 76ffbc48d4b..41ac3dfac98 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -22,5 +22,6 @@ config UCC
config QE_USB
bool
+ default y if USB_GADGET_FSL_QE
help
- QE USB Host Controller support
+ QE USB Controller support
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index 8e5a0bc36d0..3485288dce3 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
@@ -24,8 +25,14 @@ struct qe_gpio_chip {
struct of_mm_gpio_chip mm_gc;
spinlock_t lock;
+ unsigned long pin_flags[QE_PIO_PINS];
+#define QE_PIN_REQUESTED 0
+
/* shadowed data register to clear/set bits safely */
u32 cpdata;
+
+ /* saved_regs used to restore dedicated functions */
+ struct qe_pio_regs saved_regs;
};
static inline struct qe_gpio_chip *
@@ -40,6 +47,12 @@ static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
struct qe_pio_regs __iomem *regs = mm_gc->regs;
qe_gc->cpdata = in_be32(&regs->cpdata);
+ qe_gc->saved_regs.cpdata = qe_gc->cpdata;
+ qe_gc->saved_regs.cpdir1 = in_be32(&regs->cpdir1);
+ qe_gc->saved_regs.cpdir2 = in_be32(&regs->cpdir2);
+ qe_gc->saved_regs.cppar1 = in_be32(&regs->cppar1);
+ qe_gc->saved_regs.cppar2 = in_be32(&regs->cppar2);
+ qe_gc->saved_regs.cpodr = in_be32(&regs->cpodr);
}
static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
@@ -103,6 +116,188 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
return 0;
}
+struct qe_pin {
+ /*
+ * The qe_gpio_chip name is unfortunate, we should change that to
+ * something like qe_pio_controller. Someday.
+ */
+ struct qe_gpio_chip *controller;
+ int num;
+};
+
+/**
+ * qe_pin_request - Request a QE pin
+ * @np: device node to get a pin from
+ * @index: index of a pin in the device tree
+ * Context: non-atomic
+ *
+ * This function return qe_pin so that you could use it with the rest of
+ * the QE Pin Multiplexing API.
+ */
+struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+ struct qe_pin *qe_pin;
+ struct device_node *gc;
+ struct of_gpio_chip *of_gc = NULL;
+ struct of_mm_gpio_chip *mm_gc;
+ struct qe_gpio_chip *qe_gc;
+ int err;
+ int size;
+ const void *gpio_spec;
+ const u32 *gpio_cells;
+ unsigned long flags;
+
+ qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
+ if (!qe_pin) {
+ pr_debug("%s: can't allocate memory\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
+ &gc, &gpio_spec);
+ if (err) {
+ pr_debug("%s: can't parse gpios property\n", __func__);
+ goto err0;
+ }
+
+ if (!of_device_is_compatible(gc, "fsl,mpc8323-qe-pario-bank")) {
+ pr_debug("%s: tried to get a non-qe pin\n", __func__);
+ err = -EINVAL;
+ goto err1;
+ }
+
+ of_gc = gc->data;
+ if (!of_gc) {
+ pr_debug("%s: gpio controller %s isn't registered\n",
+ np->full_name, gc->full_name);
+ err = -ENODEV;
+ goto err1;
+ }
+
+ gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+ if (!gpio_cells || size != sizeof(*gpio_cells) ||
+ *gpio_cells != of_gc->gpio_cells) {
+ pr_debug("%s: wrong #gpio-cells for %s\n",
+ np->full_name, gc->full_name);
+ err = -EINVAL;
+ goto err1;
+ }
+
+ err = of_gc->xlate(of_gc, np, gpio_spec, NULL);
+ if (err < 0)
+ goto err1;
+
+ mm_gc = to_of_mm_gpio_chip(&of_gc->gc);
+ qe_gc = to_qe_gpio_chip(mm_gc);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
+ qe_pin->controller = qe_gc;
+ qe_pin->num = err;
+ err = 0;
+ } else {
+ err = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ if (!err)
+ return qe_pin;
+err1:
+ of_node_put(gc);
+err0:
+ kfree(qe_pin);
+ pr_debug("%s failed with status %d\n", __func__, err);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL(qe_pin_request);
+
+/**
+ * qe_pin_free - Free a pin
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function frees the qe_pin structure and makes a pin available
+ * for further qe_pin_request() calls.
+ */
+void qe_pin_free(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ unsigned long flags;
+ const int pin = qe_pin->num;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+ test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ kfree(qe_pin);
+}
+EXPORT_SYMBOL(qe_pin_free);
+
+/**
+ * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function resets a pin to a dedicated peripheral function that
+ * has been set up by the firmware.
+ */
+void qe_pin_set_dedicated(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ struct qe_pio_regs *sregs = &qe_gc->saved_regs;
+ int pin = qe_pin->num;
+ u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
+ u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
+ bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (second_reg) {
+ clrsetbits_be32(&regs->cpdir2, mask2, sregs->cpdir2 & mask2);
+ clrsetbits_be32(&regs->cppar2, mask2, sregs->cppar2 & mask2);
+ } else {
+ clrsetbits_be32(&regs->cpdir1, mask2, sregs->cpdir1 & mask2);
+ clrsetbits_be32(&regs->cppar1, mask2, sregs->cppar1 & mask2);
+ }
+
+ if (sregs->cpdata & mask1)
+ qe_gc->cpdata |= mask1;
+ else
+ qe_gc->cpdata &= ~mask1;
+
+ out_be32(&regs->cpdata, qe_gc->cpdata);
+ clrsetbits_be32(&regs->cpodr, mask1, sregs->cpodr & mask1);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_dedicated);
+
+/**
+ * qe_pin_set_gpio - Set a pin to the GPIO mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function sets a pin to the GPIO mode.
+ */
+void qe_pin_set_gpio(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ /* Let's make it input by default, GPIO API is able to change that. */
+ __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_gpio);
+
static int __init qe_add_gpiochips(void)
{
struct device_node *np;
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b3b73ae57d6..01bce3784b0 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
+#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/bootmem.h>
@@ -38,6 +39,8 @@ static void qe_snums_init(void);
static int qe_sdma_init(void);
static DEFINE_SPINLOCK(qe_lock);
+DEFINE_SPINLOCK(cmxgcr_lock);
+EXPORT_SYMBOL(cmxgcr_lock);
/* QE snum state */
enum qe_snum_state {
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index 1d78071aad7..ebb442ea191 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -18,6 +18,7 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/stddef.h>
+#include <linux/spinlock.h>
#include <linux/module.h>
#include <asm/irq.h>
@@ -26,9 +27,6 @@
#include <asm/qe.h>
#include <asm/ucc.h>
-DEFINE_SPINLOCK(cmxgcr_lock);
-EXPORT_SYMBOL(cmxgcr_lock);
-
int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
{
unsigned long flags;
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
new file mode 100644
index 00000000000..43c4569e24b
--- /dev/null
+++ b/arch/powerpc/sysdev/simple_gpio.c
@@ -0,0 +1,155 @@
+/*
+ * Simple Memory-Mapped GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <asm/prom.h>
+#include "simple_gpio.h"
+
+struct u8_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u8 data;
+};
+
+static struct u8_gpio_chip *to_u8_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct u8_gpio_chip, mm_gc);
+}
+
+static u8 u8_pin2mask(unsigned int pin)
+{
+ return 1 << (8 - 1 - pin);
+}
+
+static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+
+ return in_8(mm_gc->regs) & u8_pin2mask(gpio);
+}
+
+static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&u8_gc->lock, flags);
+
+ if (val)
+ u8_gc->data |= u8_pin2mask(gpio);
+ else
+ u8_gc->data &= ~u8_pin2mask(gpio);
+
+ out_8(mm_gc->regs, u8_gc->data);
+
+ spin_unlock_irqrestore(&u8_gc->lock, flags);
+}
+
+static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ return 0;
+}
+
+static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ u8_gpio_set(gc, gpio, val);
+ return 0;
+}
+
+static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc);
+
+ u8_gc->data = in_8(mm_gc->regs);
+}
+
+static int __init u8_simple_gpiochip_add(struct device_node *np)
+{
+ int ret;
+ struct u8_gpio_chip *u8_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL);
+ if (!u8_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&u8_gc->lock);
+
+ mm_gc = &u8_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = u8_gpio_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 8;
+ gc->direction_input = u8_gpio_dir_in;
+ gc->direction_output = u8_gpio_dir_out;
+ gc->get = u8_gpio_get;
+ gc->set = u8_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+ return 0;
+err:
+ kfree(u8_gc);
+ return ret;
+}
+
+void __init simple_gpiochip_init(const char *compatible)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, compatible) {
+ int ret;
+ struct resource r;
+
+ ret = of_address_to_resource(np, 0, &r);
+ if (ret)
+ goto err;
+
+ switch (resource_size(&r)) {
+ case 1:
+ ret = u8_simple_gpiochip_add(np);
+ if (ret)
+ goto err;
+ break;
+ default:
+ /*
+ * Whenever you need support for GPIO bank width > 1,
+ * please just turn u8_ code into huge macros, and
+ * construct needed uX_ code with it.
+ */
+ ret = -ENOSYS;
+ goto err;
+ }
+ continue;
+err:
+ pr_err("%s: registration failed, status %d\n",
+ np->full_name, ret);
+ }
+}
diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h
new file mode 100644
index 00000000000..3a7b0c513c7
--- /dev/null
+++ b/arch/powerpc/sysdev/simple_gpio.h
@@ -0,0 +1,12 @@
+#ifndef __SYSDEV_SIMPLE_GPIO_H
+#define __SYSDEV_SIMPLE_GPIO_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_SIMPLE_GPIO
+extern void simple_gpiochip_init(const char *compatible);
+#else
+static inline void simple_gpiochip_init(const char *compatible) {}
+#endif /* CONFIG_SIMPLE_GPIO */
+
+#endif /* __SYSDEV_SIMPLE_GPIO_H */