diff options
Diffstat (limited to 'arch/powerpc/sysdev/qe_lib/qe.c')
| -rw-r--r-- | arch/powerpc/sysdev/qe_lib/qe.c | 81 |
1 files changed, 71 insertions, 10 deletions
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 237e3654f48..238a07b97f2 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved. * * Authors: Shlomi Gridish <gridish@freescale.com> * Li Yang <leoli@freescale.com> @@ -27,6 +27,8 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/crc32.h> +#include <linux/mod_devicetable.h> +#include <linux/of_platform.h> #include <asm/irq.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -91,7 +93,7 @@ phys_addr_t get_qe_base(void) EXPORT_SYMBOL(get_qe_base); -void __init qe_reset(void) +void qe_reset(void) { if (qe_immr == NULL) qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE); @@ -214,7 +216,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says that the BRG divisor must be even if you're not using divide-by-16 mode. */ - if (!div16 && (divisor & 1)) + if (!div16 && (divisor & 1) && (divisor > 3)) divisor++; tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | @@ -264,7 +266,19 @@ EXPORT_SYMBOL(qe_clock_source); static void qe_snums_init(void) { int i; - static const u8 snum_init[] = { + static const u8 snum_init_76[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D, + 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D, + 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D, + 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD, + 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD, + 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED, + 0xF4, 0xF5, 0xFC, 0xFD, + }; + static const u8 snum_init_46[] = { 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, @@ -272,9 +286,15 @@ static void qe_snums_init(void) 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59, 0x68, 0x69, 0x78, 0x79, 0x80, 0x81, }; + static const u8 *snum_init; qe_num_of_snum = qe_get_num_of_snums(); + if (qe_num_of_snum == 76) + snum_init = snum_init_76; + else + snum_init = snum_init_46; + for (i = 0; i < qe_num_of_snum; i++) { snums[i].num = snum_init[i]; snums[i].state = QE_SNUM_STATE_FREE; @@ -317,16 +337,18 @@ EXPORT_SYMBOL(qe_put_snum); static int qe_sdma_init(void) { struct sdma __iomem *sdma = &qe_immr->sdma; - unsigned long sdma_buf_offset; + static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM; if (!sdma) return -ENODEV; /* allocate 2 internal temporary buffers (512 bytes size each) for * the SDMA */ - sdma_buf_offset = qe_muram_alloc(512 * 2, 4096); - if (IS_ERR_VALUE(sdma_buf_offset)) - return -ENOMEM; + if (IS_ERR_VALUE(sdma_buf_offset)) { + sdma_buf_offset = qe_muram_alloc(512 * 2, 4096); + if (IS_ERR_VALUE(sdma_buf_offset)) + return -ENOMEM; + } out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK); out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | @@ -336,7 +358,7 @@ static int qe_sdma_init(void) } /* The maximum number of RISCs we support */ -#define MAX_QE_RISC 2 +#define MAX_QE_RISC 4 /* Firmware information stored here for qe_get_firmware_info() */ static struct qe_firmware_info qe_firmware_info; @@ -373,12 +395,15 @@ static void qe_upload_microcode(const void *base, for (i = 0; i < be32_to_cpu(ucode->count); i++) out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i])); + + /* Set I-RAM Ready Register */ + out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY)); } /* * Upload a microcode to the I-RAM at a specific address. * - * See Documentation/powerpc/qe-firmware.txt for information on QE microcode + * See Documentation/powerpc/qe_firmware.txt for information on QE microcode * uploading. * * Currently, only version 1 is supported, so the 'version' field must be @@ -636,6 +661,7 @@ unsigned int qe_get_num_of_snums(void) if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) { /* No QE ever has fewer than 28 SNUMs */ pr_err("QE: number of snum is invalid\n"); + of_node_put(qe); return -EINVAL; } } @@ -645,3 +671,38 @@ unsigned int qe_get_num_of_snums(void) return num_of_snums; } EXPORT_SYMBOL(qe_get_num_of_snums); + +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) +static int qe_resume(struct platform_device *ofdev) +{ + if (!qe_alive_during_sleep()) + qe_reset(); + return 0; +} + +static int qe_probe(struct platform_device *ofdev) +{ + return 0; +} + +static const struct of_device_id qe_ids[] = { + { .compatible = "fsl,qe", }, + { }, +}; + +static struct platform_driver qe_driver = { + .driver = { + .name = "fsl-qe", + .owner = THIS_MODULE, + .of_match_table = qe_ids, + }, + .probe = qe_probe, + .resume = qe_resume, +}; + +static int __init qe_drv_init(void) +{ + return platform_driver_register(&qe_driver); +} +device_initcall(qe_drv_init); +#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */ |