diff options
Diffstat (limited to 'arch/powerpc/sysdev/ppc4xx_pci.c')
| -rw-r--r-- | arch/powerpc/sysdev/ppc4xx_pci.c | 106 |
1 files changed, 95 insertions, 11 deletions
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 4f05f754234..df6e2fc4ff9 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -176,8 +176,12 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose, return -ENXIO; } - /* Check that we are fully contained within 32 bits space */ - if (res->end > 0xffffffff) { + /* Check that we are fully contained within 32 bits space if we are not + * running on a 460sx or 476fpe which have 64 bit bus addresses. + */ + if (res->end > 0xffffffff && + !(of_device_is_compatible(hose->dn, "ibm,plb-pciex-460sx") + || of_device_is_compatible(hose->dn, "ibm,plb-pciex-476fpe"))) { printk(KERN_ERR "%s: dma-ranges outside of 32 bits space\n", hose->dn->full_name); return -ENXIO; @@ -257,6 +261,7 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose, /* Setup outbound memory windows */ for (i = j = 0; i < 3; i++) { struct resource *res = &hose->mem_resources[i]; + resource_size_t offset = hose->mem_offset[i]; /* we only care about memory windows */ if (!(res->flags & IORESOURCE_MEM)) @@ -270,7 +275,7 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose, /* Configure the resource */ if (ppc4xx_setup_one_pci_PMM(hose, reg, res->start, - res->start - hose->pci_mem_offset, + res->start - offset, resource_size(res), res->flags, j) == 0) { @@ -279,7 +284,7 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose, /* If the resource PCI address is 0 then we have our * ISA memory hole */ - if (res->start == hose->pci_mem_offset) + if (res->start == offset) found_isa_hole = 1; } } @@ -457,6 +462,7 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose, /* Setup outbound memory windows */ for (i = j = 0; i < 3; i++) { struct resource *res = &hose->mem_resources[i]; + resource_size_t offset = hose->mem_offset[i]; /* we only care about memory windows */ if (!(res->flags & IORESOURCE_MEM)) @@ -470,7 +476,7 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose, /* Configure the resource */ if (ppc4xx_setup_one_pcix_POM(hose, reg, res->start, - res->start - hose->pci_mem_offset, + res->start - offset, resource_size(res), res->flags, j) == 0) { @@ -479,7 +485,7 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose, /* If the resource PCI address is 0 then we have our * ISA memory hole */ - if (res->start == hose->pci_mem_offset) + if (res->start == offset) found_isa_hole = 1; } } @@ -1050,6 +1056,74 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata = .check_link = ppc4xx_pciex_check_link_sdr, }; +static int __init apm821xx_pciex_core_init(struct device_node *np) +{ + /* Return the number of pcie port */ + return 1; +} + +static int __init apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + u32 val; + + /* + * Do a software reset on PCIe ports. + * This code is to fix the issue that pci drivers doesn't re-assign + * bus number for PCIE devices after Uboot + * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 + * PT quad port, SAS LSI 1064E) + */ + + mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); + mdelay(10); + + if (port->endpoint) + val = PTYPE_LEGACY_ENDPOINT << 20; + else + val = PTYPE_ROOT_PORT << 20; + + val |= LNKW_X1 << 12; + + mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000); + + mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130); + mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006); + + mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); + mdelay(50); + mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | + (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN)); + + /* Poll for PHY reset */ + val = PESDR0_460EX_RSTSTA - port->sdr_base; + if (ppc4xx_pciex_wait_on_sdr(port, val, 0x1, 1, 100)) { + printk(KERN_WARNING "%s: PCIE: Can't reset PHY\n", __func__); + return -EBUSY; + } else { + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) & + ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) | + PESDRx_RCSSET_RSTPYN); + + port->has_ibpre = 1; + return 0; + } +} + +static struct ppc4xx_pciex_hwops apm821xx_pcie_hwops __initdata = { + .want_sdr = true, + .core_init = apm821xx_pciex_core_init, + .port_init_hw = apm821xx_pciex_init_port_hw, + .setup_utl = ppc460ex_pciex_init_utl, + .check_link = ppc4xx_pciex_check_link_sdr, +}; + static int __init ppc460sx_pciex_core_init(struct device_node *np) { /* HSS drive amplitude */ @@ -1362,13 +1436,16 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops; if (of_device_is_compatible(np, "ibm,plb-pciex-460sx")) ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops; + if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx")) + ppc4xx_pciex_hwops = &apm821xx_pcie_hwops; #endif /* CONFIG_44x */ #ifdef CONFIG_40x if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops; #endif #ifdef CONFIG_476FPE - if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")) + if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe") + || of_device_is_compatible(np, "ibm,plb-pciex-476gtr")) ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops; #endif if (ppc4xx_pciex_hwops == NULL) { @@ -1679,7 +1756,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port, dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT | DCRO_PEGPL_OMRxMSKL_VAL); - else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe")) + else if (of_device_is_compatible( + port->node, "ibm,plb-pciex-476fpe") || + of_device_is_compatible( + port->node, "ibm,plb-pciex-476gtr")) dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT | DCRO_PEGPL_OMRxMSKL_VAL); @@ -1722,6 +1802,7 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port, /* Setup outbound memory windows */ for (i = j = 0; i < 3; i++) { struct resource *res = &hose->mem_resources[i]; + resource_size_t offset = hose->mem_offset[i]; /* we only care about memory windows */ if (!(res->flags & IORESOURCE_MEM)) @@ -1735,7 +1816,7 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port, /* Configure the resource */ if (ppc4xx_setup_one_pciex_POM(port, hose, mbase, res->start, - res->start - hose->pci_mem_offset, + res->start - offset, resource_size(res), res->flags, j) == 0) { @@ -1744,7 +1825,7 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port, /* If the resource PCI address is 0 then we have our * ISA memory hole */ - if (res->start == hose->pci_mem_offset) + if (res->start == offset) found_isa_hole = 1; } } @@ -1808,7 +1889,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, sa |= PCI_BASE_ADDRESS_MEM_PREFETCH; if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") || - of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe")) + of_device_is_compatible( + port->node, "ibm,plb-pciex-476fpe") || + of_device_is_compatible( + port->node, "ibm,plb-pciex-476gtr")) sa |= PCI_BASE_ADDRESS_MEM_TYPE_64; out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa)); |
