diff options
Diffstat (limited to 'arch/powerpc/sysdev/mpic.c')
| -rw-r--r-- | arch/powerpc/sysdev/mpic.c | 160 |
1 files changed, 119 insertions, 41 deletions
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 3b2efd41abf..be33c9768ea 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -48,6 +48,12 @@ #define DBG(fmt...) #endif +struct bus_type mpic_subsys = { + .name = "mpic", + .dev_name = "mpic", +}; +EXPORT_SYMBOL_GPL(mpic_subsys); + static struct mpic *mpics; static struct mpic *mpic_primary; static DEFINE_RAW_SPINLOCK(mpic_lock); @@ -529,7 +535,7 @@ static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase, mpic->fixups[irq].data = readl(base + 4) | 0x80000000; } } - + static void __init mpic_scan_ht_pics(struct mpic *mpic) { @@ -836,7 +842,7 @@ int mpic_set_affinity(struct irq_data *d, const struct cpumask *cpumask, mpic_physmask(mask)); } - return 0; + return IRQ_SET_MASK_OK; } static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type) @@ -880,25 +886,25 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) /* Default: read HW settings */ if (flow_type == IRQ_TYPE_DEFAULT) { - switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | - MPIC_INFO(VECPRI_SENSE_MASK))) { - case MPIC_INFO(VECPRI_SENSE_EDGE) | - MPIC_INFO(VECPRI_POLARITY_POSITIVE): - flow_type = IRQ_TYPE_EDGE_RISING; - break; - case MPIC_INFO(VECPRI_SENSE_EDGE) | - MPIC_INFO(VECPRI_POLARITY_NEGATIVE): - flow_type = IRQ_TYPE_EDGE_FALLING; - break; - case MPIC_INFO(VECPRI_SENSE_LEVEL) | - MPIC_INFO(VECPRI_POLARITY_POSITIVE): - flow_type = IRQ_TYPE_LEVEL_HIGH; - break; - case MPIC_INFO(VECPRI_SENSE_LEVEL) | - MPIC_INFO(VECPRI_POLARITY_NEGATIVE): - flow_type = IRQ_TYPE_LEVEL_LOW; - break; - } + int vold_ps; + + vold_ps = vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK)); + + if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE))) + flow_type = IRQ_TYPE_EDGE_RISING; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE))) + flow_type = IRQ_TYPE_EDGE_FALLING; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE))) + flow_type = IRQ_TYPE_LEVEL_HIGH; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE))) + flow_type = IRQ_TYPE_LEVEL_LOW; + else + WARN_ONCE(1, "mpic: unknown IRQ type %d\n", vold); } /* Apply to irq desc */ @@ -920,6 +926,22 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) return IRQ_SET_MASK_OK_NOCOPY; } +static int mpic_irq_set_wake(struct irq_data *d, unsigned int on) +{ + struct irq_desc *desc = container_of(d, struct irq_desc, irq_data); + struct mpic *mpic = mpic_from_irq_data(d); + + if (!(mpic->flags & MPIC_FSL)) + return -ENXIO; + + if (on) + desc->action->flags |= IRQF_NO_SUSPEND; + else + desc->action->flags &= ~IRQF_NO_SUSPEND; + + return 0; +} + void mpic_set_vector(unsigned int virq, unsigned int vector) { struct mpic *mpic = mpic_from_irq(virq); @@ -957,6 +979,7 @@ static struct irq_chip mpic_irq_chip = { .irq_unmask = mpic_unmask_irq, .irq_eoi = mpic_end_irq, .irq_set_type = mpic_set_irq_type, + .irq_set_wake = mpic_irq_set_wake, }; #ifdef CONFIG_SMP @@ -971,6 +994,7 @@ static struct irq_chip mpic_tm_chip = { .irq_mask = mpic_mask_tm, .irq_unmask = mpic_unmask_tm, .irq_eoi = mpic_end_irq, + .irq_set_wake = mpic_irq_set_wake, }; #ifdef CONFIG_MPIC_U3_HT_IRQS @@ -1001,8 +1025,12 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq, if (hw == mpic->spurious_vec) return -EINVAL; - if (mpic->protected && test_bit(hw, mpic->protected)) - return -EINVAL; + if (mpic->protected && test_bit(hw, mpic->protected)) { + pr_warning("mpic: Mapping of source 0x%x failed, " + "source protected by firmware !\n",\ + (unsigned int)hw); + return -EPERM; + } #ifdef CONFIG_SMP else if (hw >= mpic->ipi_vecs[0]) { @@ -1029,8 +1057,12 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq, if (mpic_map_error_int(mpic, virq, hw)) return 0; - if (hw >= mpic->num_sources) + if (hw >= mpic->num_sources) { + pr_warning("mpic: Mapping of source 0x%x failed, " + "source out of range !\n",\ + (unsigned int)hw); return -EINVAL; + } mpic_msi_reserve_hwirq(mpic, hw); @@ -1056,8 +1088,14 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq, * is done here. */ if (!mpic_is_ipi(mpic, hw) && (mpic->flags & MPIC_NO_RESET)) { + int cpu; + + preempt_disable(); + cpu = mpic_processor_id(mpic); + preempt_enable(); + mpic_set_vector(virq, hw); - mpic_set_destination(virq, mpic_processor_id(mpic)); + mpic_set_destination(virq, cpu); mpic_irq_set_priority(virq, 8); } @@ -1165,10 +1203,33 @@ static struct irq_domain_ops mpic_host_ops = { .xlate = mpic_host_xlate, }; +static u32 fsl_mpic_get_version(struct mpic *mpic) +{ + u32 brr1; + + if (!(mpic->flags & MPIC_FSL)) + return 0; + + brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs, + MPIC_FSL_BRR1); + + return brr1 & MPIC_FSL_BRR1_VER; +} + /* * Exported functions */ +u32 fsl_mpic_primary_get_version(void) +{ + struct mpic *mpic = mpic_primary; + + if (mpic) + return fsl_mpic_get_version(mpic); + + return 0; +} + struct mpic * __init mpic_alloc(struct device_node *node, phys_addr_t phys_addr, unsigned int flags, @@ -1182,6 +1243,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, const char *vers; const u32 *psrc; u32 last_irq; + u32 fsl_version = 0; /* Default MPIC search parameters */ static const struct of_device_id __initconst mpic_device_id[] = { @@ -1314,7 +1376,6 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); if (mpic->flags & MPIC_FSL) { - u32 brr1, version; int ret; /* @@ -1325,9 +1386,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic_map(mpic, mpic->paddr, &mpic->thiscpuregs, MPIC_CPU_THISBASE, 0x1000); - brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs, - MPIC_FSL_BRR1); - version = brr1 & MPIC_FSL_BRR1_VER; + fsl_version = fsl_mpic_get_version(mpic); /* Error interrupt mask register (EIMR) is required for * handling individual device error interrupts. EIMR @@ -1342,11 +1401,30 @@ struct mpic * __init mpic_alloc(struct device_node *node, * is the number of vectors which have been consumed by * ipis and timer interrupts. */ - if (version >= 0x401) { + if (fsl_version >= 0x401) { ret = mpic_setup_error_int(mpic, intvec_top - 12); if (ret) return NULL; } + + } + + /* + * EPR is only available starting with v4.0. To support + * platforms that don't know the MPIC version at compile-time, + * such as qemu-e500, turn off coreint if this MPIC doesn't + * support it. Note that we never enable it if it wasn't + * requested in the first place. + * + * This is done outside the MPIC_FSL check, so that we + * also disable coreint if the MPIC node doesn't have + * an "fsl,mpic" compatible at all. This will be the case + * with device trees generated by older versions of QEMU. + * fsl_version will be zero if MPIC_FSL is not set. + */ + if (fsl_version < 0x400 && (flags & MPIC_ENABLE_COREINT)) { + WARN_ON(ppc_md.get_irq != mpic_get_coreint_irq); + ppc_md.get_irq = mpic_get_irq; } /* Reset */ @@ -1403,7 +1481,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, * as a default instead of the value read from the HW. */ last_irq = (greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK) - >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT; + >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT; if (isu_size) last_irq = isu_size * MPIC_MAX_ISU - 1; of_property_read_u32(mpic->node, "last-interrupt-source", &last_irq); @@ -1498,9 +1576,7 @@ void __init mpic_init(struct mpic *mpic) mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); if (mpic->flags & MPIC_FSL) { - u32 brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs, - MPIC_FSL_BRR1); - u32 version = brr1 & MPIC_FSL_BRR1_VER; + u32 version = fsl_mpic_get_version(mpic); /* * Timer group B is present at the latest in MPIC 3.1 (e.g. @@ -1512,10 +1588,6 @@ void __init mpic_init(struct mpic *mpic) num_timers = 8; } - /* FSL mpic error interrupt intialization */ - if (mpic->flags & MPIC_FSL_HAS_EIMR) - mpic_err_int_init(mpic, MPIC_FSL_ERR_INT); - /* Initialize timers to our reserved vectors and mask them for now */ for (i = 0; i < num_timers; i++) { unsigned int offset = mpic_tm_offset(mpic, i); @@ -1555,7 +1627,7 @@ void __init mpic_init(struct mpic *mpic) /* start with vector = source number, and masked */ u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT); - + /* check if protected */ if (mpic->protected && test_bit(i, mpic->protected)) continue; @@ -1564,7 +1636,7 @@ void __init mpic_init(struct mpic *mpic) mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu); } } - + /* Init spurious vector */ mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), mpic->spurious_vec); @@ -1599,6 +1671,10 @@ void __init mpic_init(struct mpic *mpic) irq_set_chained_handler(virq, &mpic_cascade); } } + + /* FSL mpic error interrupt intialization */ + if (mpic->flags & MPIC_FSL_HAS_EIMR) + mpic_err_int_init(mpic, MPIC_FSL_ERR_INT); } void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) @@ -1675,7 +1751,7 @@ void mpic_setup_this_cpu(void) * it differently, then we should make sure we also change the default * values of irq_desc[].affinity in irq.c. */ - if (distribute_irqs) { + if (distribute_irqs && !(mpic->flags & MPIC_SINGLE_DEST_CPU)) { for (i = 0; i < mpic->num_sources ; i++) mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk); @@ -1971,6 +2047,8 @@ static struct syscore_ops mpic_syscore_ops = { static int mpic_init_sys(void) { register_syscore_ops(&mpic_syscore_ops); + subsys_system_register(&mpic_subsys, NULL); + return 0; } |
