11 files changed, 0 insertions, 1838 deletions

diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
deleted file mode 100644
index c3c48eb62cc..00000000000
--- a/arch/powerpc/platforms/wsp/Kconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-config PPC_WSP
-	bool
-	default n
-
-menu "WSP platform selection"
-	depends on PPC_BOOK3E_64
-
-config PPC_PSR2
-	bool "PSR-2 platform"
-	select PPC_A2
-	select GENERIC_TBSYNC
-	select PPC_SCOM
-	select EPAPR_BOOT
-	select PPC_WSP
-	select PPC_XICS
-	select PPC_ICP_NATIVE
-	default y
-
-endmenu
-
-config PPC_A2_DD2
-	bool "Support for DD2 based A2/WSP systems"
-	depends on PPC_A2
-
-config WORKAROUND_ERRATUM_463
-	depends on PPC_A2_DD2
-	bool "Workaround erratum 463"
-	default y
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
deleted file mode 100644
index 095be73d6cd..00000000000
--- a/arch/powerpc/platforms/wsp/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-ccflags-y			+= -mno-minimal-toc
-
-obj-y				+= setup.o ics.o
-obj-$(CONFIG_PPC_PSR2)		+= psr2.o opb_pic.o
-obj-$(CONFIG_PPC_WSP)		+= scom_wsp.o
-obj-$(CONFIG_SMP)		+= smp.o scom_smp.o
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c
deleted file mode 100644
index e53bd9e7b12..00000000000
--- a/arch/powerpc/platforms/wsp/ics.c
+++ /dev/null
@@ -1,712 +0,0 @@
-/*
- * Copyright 2008-2011 IBM Corporation.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/cpu.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/msi.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/xics.h>
-
-#include "wsp.h"
-#include "ics.h"
-
-
-/* WSP ICS */
-
-struct wsp_ics {
-	struct ics ics;
-	struct device_node *dn;
-	void __iomem *regs;
-	spinlock_t lock;
-	unsigned long *bitmap;
-	u32 chip_id;
-	u32 lsi_base;
-	u32 lsi_count;
-	u64 hwirq_start;
-	u64 count;
-#ifdef CONFIG_SMP
-	int *hwirq_cpu_map;
-#endif
-};
-
-#define to_wsp_ics(ics)	container_of(ics, struct wsp_ics, ics)
-
-#define INT_SRC_LAYER_BUID_REG(base)	((base) + 0x00)
-#define IODA_TBL_ADDR_REG(base)		((base) + 0x18)
-#define IODA_TBL_DATA_REG(base)		((base) + 0x20)
-#define XIVE_UPDATE_REG(base)		((base) + 0x28)
-#define ICS_INT_CAPS_REG(base)		((base) + 0x30)
-
-#define TBL_AUTO_INCREMENT	((1UL << 63) | (1UL << 15))
-#define TBL_SELECT_XIST		(1UL << 48)
-#define TBL_SELECT_XIVT		(1UL << 49)
-
-#define IODA_IRQ(irq)		((irq) & (0x7FFULL))	/* HRM 5.1.3.4 */
-
-#define XIST_REQUIRED		0x8
-#define XIST_REJECTED		0x4
-#define XIST_PRESENTED		0x2
-#define XIST_PENDING		0x1
-
-#define XIVE_SERVER_SHIFT	42
-#define XIVE_SERVER_MASK	0xFFFFULL
-#define XIVE_PRIORITY_MASK	0xFFULL
-#define XIVE_PRIORITY_SHIFT	32
-#define XIVE_WRITE_ENABLE	(1ULL << 63)
-
-/*
- * The docs refer to a 6 bit field called ChipID, which consists of a
- * 3 bit NodeID and a 3 bit ChipID. On WSP the ChipID is always zero
- * so we ignore it, and every where we use "chip id" in this code we
- * mean the NodeID.
- */
-#define WSP_ICS_CHIP_SHIFT		17
-
-
-static struct wsp_ics *ics_list;
-static int num_ics;
-
-/* ICS Source controller accessors */
-
-static u64 wsp_ics_get_xive(struct wsp_ics *ics, unsigned int irq)
-{
-	unsigned long flags;
-	u64 xive;
-
-	spin_lock_irqsave(&ics->lock, flags);
-	out_be64(IODA_TBL_ADDR_REG(ics->regs), TBL_SELECT_XIVT | IODA_IRQ(irq));
-	xive = in_be64(IODA_TBL_DATA_REG(ics->regs));
-	spin_unlock_irqrestore(&ics->lock, flags);
-
-	return xive;
-}
-
-static void wsp_ics_set_xive(struct wsp_ics *ics, unsigned int irq, u64 xive)
-{
-	xive &= ~XIVE_ADDR_MASK;
-	xive |= (irq & XIVE_ADDR_MASK);
-	xive |= XIVE_WRITE_ENABLE;
-
-	out_be64(XIVE_UPDATE_REG(ics->regs), xive);
-}
-
-static u64 xive_set_server(u64 xive, unsigned int server)
-{
-	u64 mask = ~(XIVE_SERVER_MASK << XIVE_SERVER_SHIFT);
-
-	xive &= mask;
-	xive |= (server & XIVE_SERVER_MASK) << XIVE_SERVER_SHIFT;
-
-	return xive;
-}
-
-static u64 xive_set_priority(u64 xive, unsigned int priority)
-{
-	u64 mask = ~(XIVE_PRIORITY_MASK << XIVE_PRIORITY_SHIFT);
-
-	xive &= mask;
-	xive |= (priority & XIVE_PRIORITY_MASK) << XIVE_PRIORITY_SHIFT;
-
-	return xive;
-}
-
-
-#ifdef CONFIG_SMP
-/* Find logical CPUs within mask on a given chip and store result in ret */
-void cpus_on_chip(int chip_id, cpumask_t *mask, cpumask_t *ret)
-{
-	int cpu, chip;
-	struct device_node *cpu_dn, *dn;
-	const u32 *prop;
-
-	cpumask_clear(ret);
-	for_each_cpu(cpu, mask) {
-		cpu_dn = of_get_cpu_node(cpu, NULL);
-		if (!cpu_dn)
-			continue;
-
-		prop = of_get_property(cpu_dn, "at-node", NULL);
-		if (!prop) {
-			of_node_put(cpu_dn);
-			continue;
-		}
-
-		dn = of_find_node_by_phandle(*prop);
-		of_node_put(cpu_dn);
-
-		chip = wsp_get_chip_id(dn);
-		if (chip == chip_id)
-			cpumask_set_cpu(cpu, ret);
-
-		of_node_put(dn);
-	}
-}
-
-/* Store a suitable CPU to handle a hwirq in the ics->hwirq_cpu_map cache */
-static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
-			   const cpumask_t *affinity)
-{
-	cpumask_var_t avail, newmask;
-	int ret = -ENOMEM, cpu, cpu_rover = 0, target;
-	int index = hwirq - ics->hwirq_start;
-	unsigned int nodeid;
-
-	BUG_ON(index < 0 || index >= ics->count);
-
-	if (!ics->hwirq_cpu_map)
-		return -ENOMEM;
-
-	if (!distribute_irqs) {
-		ics->hwirq_cpu_map[hwirq - ics->hwirq_start] = xics_default_server;
-		return 0;
-	}
-
-	/* Allocate needed CPU masks */
-	if (!alloc_cpumask_var(&avail, GFP_KERNEL))
-		goto ret;
-	if (!alloc_cpumask_var(&newmask, GFP_KERNEL))
-		goto freeavail;
-
-	/* Find PBus attached to the source of this IRQ */
-	nodeid = (hwirq >> WSP_ICS_CHIP_SHIFT) & 0x3; /* 12:14 */
-
-	/* Find CPUs that could handle this IRQ */
-	if (affinity)
-		cpumask_and(avail, cpu_online_mask, affinity);
-	else
-		cpumask_copy(avail, cpu_online_mask);
-
-	/* Narrow selection down to logical CPUs on the same chip */
-	cpus_on_chip(nodeid, avail, newmask);
-
-	/* Ensure we haven't narrowed it down to 0 */
-	if (unlikely(cpumask_empty(newmask))) {
-		if (unlikely(cpumask_empty(avail))) {
-			ret = -1;
-			goto out;
-		}
-		cpumask_copy(newmask, avail);
-	}
-
-	/* Choose a CPU out of those we narrowed it down to in round robin */
-	target = hwirq % cpumask_weight(newmask);
-	for_each_cpu(cpu, newmask) {
-		if (cpu_rover++ >= target) {
-			ics->hwirq_cpu_map[index] = get_hard_smp_processor_id(cpu);
-			ret = 0;
-			goto out;
-		}
-	}
-
-	/* Shouldn't happen */
-	WARN_ON(1);
-
-out:
-	free_cpumask_var(newmask);
-freeavail:
-	free_cpumask_var(avail);
-ret:
-	if (ret < 0) {
-		ics->hwirq_cpu_map[index] = cpumask_first(cpu_online_mask);
-		pr_warning("Error, falling hwirq 0x%x routing back to CPU %i\n",
-			   hwirq, ics->hwirq_cpu_map[index]);
-	}
-	return ret;
-}
-
-static void alloc_irq_map(struct wsp_ics *ics)
-{
-	int i;
-
-	ics->hwirq_cpu_map = kmalloc(sizeof(int) * ics->count, GFP_KERNEL);
-	if (!ics->hwirq_cpu_map) {
-		pr_warning("Allocate hwirq_cpu_map failed, "
-			   "IRQ balancing disabled\n");
-		return;
-	}
-
-	for (i=0; i < ics->count; i++)
-		ics->hwirq_cpu_map[i] = xics_default_server;
-}
-
-static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
-{
-	int index = hwirq - ics->hwirq_start;
-
-	BUG_ON(index < 0 || index >= ics->count);
-
-	if (!ics->hwirq_cpu_map)
-		return xics_default_server;
-
-	return ics->hwirq_cpu_map[index];
-}
-#else /* !CONFIG_SMP */
-static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
-			   const cpumask_t *affinity)
-{
-	return 0;
-}
-
-static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
-{
-	return xics_default_server;
-}
-
-static void alloc_irq_map(struct wsp_ics *ics) { }
-#endif
-
-static void wsp_chip_unmask_irq(struct irq_data *d)
-{
-	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
-	struct wsp_ics *ics;
-	int server;
-	u64 xive;
-
-	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
-		return;
-
-	ics = d->chip_data;
-	if (WARN_ON(!ics))
-		return;
-
-	server = get_irq_server(ics, hw_irq);
-
-	xive = wsp_ics_get_xive(ics, hw_irq);
-	xive = xive_set_server(xive, server);
-	xive = xive_set_priority(xive, DEFAULT_PRIORITY);
-	wsp_ics_set_xive(ics, hw_irq, xive);
-}
-
-static unsigned int wsp_chip_startup(struct irq_data *d)
-{
-	/* unmask it */
-	wsp_chip_unmask_irq(d);
-	return 0;
-}
-
-static void wsp_mask_real_irq(unsigned int hw_irq, struct wsp_ics *ics)
-{
-	u64 xive;
-
-	if (hw_irq == XICS_IPI)
-		return;
-
-	if (WARN_ON(!ics))
-		return;
-	xive = wsp_ics_get_xive(ics, hw_irq);
-	xive = xive_set_server(xive, xics_default_server);
-	xive = xive_set_priority(xive, LOWEST_PRIORITY);
-	wsp_ics_set_xive(ics, hw_irq, xive);
-}
-
-static void wsp_chip_mask_irq(struct irq_data *d)
-{
-	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
-	struct wsp_ics *ics = d->chip_data;
-
-	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
-		return;
-
-	wsp_mask_real_irq(hw_irq, ics);
-}
-
-static int wsp_chip_set_affinity(struct irq_data *d,
-				 const struct cpumask *cpumask, bool force)
-{
-	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
-	struct wsp_ics *ics;
-	int ret;
-	u64 xive;
-
-	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
-		return -1;
-
-	ics = d->chip_data;
-	if (WARN_ON(!ics))
-		return -1;
-	xive = wsp_ics_get_xive(ics, hw_irq);
-
-	/*
-	 * For the moment only implement delivery to all cpus or one cpu.
-	 * Get current irq_server for the given irq
-	 */
-	ret = cache_hwirq_map(ics, d->irq, cpumask);
-	if (ret == -1) {
-		char cpulist[128];
-		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
-		pr_warning("%s: No online cpus in the mask %s for irq %d\n",
-			   __func__, cpulist, d->irq);
-		return -1;
-	} else if (ret == -ENOMEM) {
-		pr_warning("%s: Out of memory\n", __func__);
-		return -1;
-	}
-
-	xive = xive_set_server(xive, get_irq_server(ics, hw_irq));
-	wsp_ics_set_xive(ics, hw_irq, xive);
-
-	return 0;
-}
-
-static struct irq_chip wsp_irq_chip = {
-	.name = "WSP ICS",
-	.irq_startup		= wsp_chip_startup,
-	.irq_mask		= wsp_chip_mask_irq,
-	.irq_unmask		= wsp_chip_unmask_irq,
-	.irq_set_affinity	= wsp_chip_set_affinity
-};
-
-static int wsp_ics_host_match(struct ics *ics, struct device_node *dn)
-{
-	/* All ICSs in the system implement a global irq number space,
-	 * so match against them all. */
-	return of_device_is_compatible(dn, "ibm,ppc-xics");
-}
-
-static int wsp_ics_match_hwirq(struct wsp_ics *wsp_ics, unsigned int hwirq)
-{
-	if (hwirq >= wsp_ics->hwirq_start &&
-	    hwirq <  wsp_ics->hwirq_start + wsp_ics->count)
-		return 1;
-
-	return 0;
-}
-
-static int wsp_ics_map(struct ics *ics, unsigned int virq)
-{
-	struct wsp_ics *wsp_ics = to_wsp_ics(ics);
-	unsigned int hw_irq = virq_to_hw(virq);
-	unsigned long flags;
-
-	if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
-		return -ENOENT;
-
-	irq_set_chip_and_handler(virq, &wsp_irq_chip, handle_fasteoi_irq);
-
-	irq_set_chip_data(virq, wsp_ics);
-
-	spin_lock_irqsave(&wsp_ics->lock, flags);
-	bitmap_allocate_region(wsp_ics->bitmap, hw_irq - wsp_ics->hwirq_start, 0);
-	spin_unlock_irqrestore(&wsp_ics->lock, flags);
-
-	return 0;
-}
-
-static void wsp_ics_mask_unknown(struct ics *ics, unsigned long hw_irq)
-{
-	struct wsp_ics *wsp_ics = to_wsp_ics(ics);
-
-	if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
-		return;
-
-	pr_err("%s: IRQ %lu (real) is invalid, disabling it.\n", __func__, hw_irq);
-	wsp_mask_real_irq(hw_irq, wsp_ics);
-}
-
-static long wsp_ics_get_server(struct ics *ics, unsigned long hw_irq)
-{
-	struct wsp_ics *wsp_ics = to_wsp_ics(ics);
-
-	if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
-		return -ENOENT;
-
-	return get_irq_server(wsp_ics, hw_irq);
-}
-
-/* HW Number allocation API */
-
-static struct wsp_ics *wsp_ics_find_dn_ics(struct device_node *dn)
-{
-	struct device_node *iparent;
-	int i;
-
-	iparent = of_irq_find_parent(dn);
-	if (!iparent) {
-		pr_err("wsp_ics: Failed to find interrupt parent!\n");
-		return NULL;
-	}
-
-	for(i = 0; i < num_ics; i++) {
-		if(ics_list[i].dn == iparent)
-			break;
-	}
-
-	if (i >= num_ics) {
-		pr_err("wsp_ics: Unable to find parent bitmap!\n");
-		return NULL;
-	}
-
-	return &ics_list[i];
-}
-
-int wsp_ics_alloc_irq(struct device_node *dn, int num)
-{
-	struct wsp_ics *ics;
-	int order, offset;
-
-	ics = wsp_ics_find_dn_ics(dn);
-	if (!ics)
-		return -ENODEV;
-
-	/* Fast, but overly strict if num isn't a power of two */
-	order = get_count_order(num);
-
-	spin_lock_irq(&ics->lock);
-	offset = bitmap_find_free_region(ics->bitmap, ics->count, order);
-	spin_unlock_irq(&ics->lock);
-
-	if (offset < 0)
-		return offset;
-
-	return offset + ics->hwirq_start;
-}
-
-void wsp_ics_free_irq(struct device_node *dn, unsigned int irq)
-{
-	struct wsp_ics *ics;
-
-	ics = wsp_ics_find_dn_ics(dn);
-	if (WARN_ON(!ics))
-		return;
-
-	spin_lock_irq(&ics->lock);
-	bitmap_release_region(ics->bitmap, irq, 0);
-	spin_unlock_irq(&ics->lock);
-}
-
-/* Initialisation */
-
-static int __init wsp_ics_bitmap_setup(struct wsp_ics *ics,
-				      struct device_node *dn)
-{
-	int len, i, j, size;
-	u32 start, count;
-	const u32 *p;
-
-	size = BITS_TO_LONGS(ics->count) * sizeof(long);
-	ics->bitmap = kzalloc(size, GFP_KERNEL);
-	if (!ics->bitmap) {
-		pr_err("wsp_ics: ENOMEM allocating IRQ bitmap!\n");
-		return -ENOMEM;
-	}
-
-	spin_lock_init(&ics->lock);
-
-	p = of_get_property(dn, "available-ranges", &len);
-	if (!p || !len) {
-		/* FIXME this should be a WARN() once mambo is updated */
-		pr_err("wsp_ics: No available-ranges defined for %s\n",
-			dn->full_name);
-		return 0;
-	}
-
-	if (len % (2 * sizeof(u32)) != 0) {
-		/* FIXME this should be a WARN() once mambo is updated */
-		pr_err("wsp_ics: Invalid available-ranges for %s\n",
-			dn->full_name);
-		return 0;
-	}
-
-	bitmap_fill(ics->bitmap, ics->count);
-
-	for (i = 0; i < len / sizeof(u32); i += 2) {
-		start = of_read_number(p + i, 1);
-		count = of_read_number(p + i + 1, 1);
-
-		pr_devel("%s: start: %d count: %d\n", __func__, start, count);
-
-		if ((start + count) > (ics->hwirq_start + ics->count) ||
-		     start < ics->hwirq_start) {
-			pr_err("wsp_ics: Invalid range! -> %d to %d\n",
-					start, start + count);
-			break;
-		}
-
-		for (j = 0; j < count; j++)
-			bitmap_release_region(ics->bitmap,
-				(start + j) - ics->hwirq_start, 0);
-	}
-
-	/* Ensure LSIs are not available for allocation */
-	bitmap_allocate_region(ics->bitmap, ics->lsi_base,
-			       get_count_order(ics->lsi_count));
-
-	return 0;
-}
-
-static int __init wsp_ics_setup(struct wsp_ics *ics, struct device_node *dn)
-{
-	u32 lsi_buid, msi_buid, msi_base, msi_count;
-	void __iomem *regs;
-	const u32 *p;
-	int rc, len, i;
-	u64 caps, buid;
-
-	p = of_get_property(dn, "interrupt-ranges", &len);
-	if (!p || len < (2 * sizeof(u32))) {
-		pr_err("wsp_ics: No/bad interrupt-ranges found on %s\n",
-			dn->full_name);
-		return -ENOENT;
-	}
-
-	if (len > (2 * sizeof(u32))) {
-		pr_err("wsp_ics: Multiple ics ranges not supported.\n");
-		return -EINVAL;
-	}
-
-	regs = of_iomap(dn, 0);
-	if (!regs) {
-		pr_err("wsp_ics: of_iomap(%s) failed\n", dn->full_name);
-		return -ENXIO;
-	}
-
-	ics->hwirq_start = of_read_number(p, 1);
-	ics->count = of_read_number(p + 1, 1);
-	ics->regs = regs;
-
-	ics->chip_id = wsp_get_chip_id(dn);
-	if (WARN_ON(ics->chip_id < 0))
-		ics->chip_id = 0;
-
-	/* Get some informations about the critter */
-	caps = in_be64(ICS_INT_CAPS_REG(ics->regs));
-	buid = in_be64(INT_SRC_LAYER_BUID_REG(ics->regs));
-	ics->lsi_count = caps >> 56;
-	msi_count = (caps >> 44) & 0x7ff;
-
-	/* Note: LSI BUID is 9 bits, but really only 3 are BUID and the
-	 * rest is mixed in the interrupt number. We store the whole
-	 * thing though
-	 */
-	lsi_buid = (buid >> 48) & 0x1ff;
-	ics->lsi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | lsi_buid << 5;
-	msi_buid = (buid >> 37) & 0x7;
-	msi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | msi_buid << 11;
-
-	pr_info("wsp_ics: Found %s\n", dn->full_name);
-	pr_info("wsp_ics:    irq range : 0x%06llx..0x%06llx\n",
-		ics->hwirq_start, ics->hwirq_start + ics->count - 1);
-	pr_info("wsp_ics:    %4d LSIs : 0x%06x..0x%06x\n",
-		ics->lsi_count, ics->lsi_base,
-		ics->lsi_base + ics->lsi_count - 1);
-	pr_info("wsp_ics:    %4d MSIs : 0x%06x..0x%06x\n",
-		msi_count, msi_base,
-		msi_base + msi_count - 1);
-
-	/* Let's check the HW config is sane */
-	if (ics->lsi_base < ics->hwirq_start ||
-	    (ics->lsi_base + ics->lsi_count) > (ics->hwirq_start + ics->count))
-		pr_warning("wsp_ics: WARNING ! LSIs out of interrupt-ranges !\n");
-	if (msi_base < ics->hwirq_start ||
-	    (msi_base + msi_count) > (ics->hwirq_start + ics->count))
-		pr_warning("wsp_ics: WARNING ! MSIs out of interrupt-ranges !\n");
-
-	/* We don't check for overlap between LSI and MSI, which will happen
-	 * if we use the same BUID, I'm not sure yet how legit that is.
-	 */
-
-	rc = wsp_ics_bitmap_setup(ics, dn);
-	if (rc) {
-		iounmap(regs);
-		return rc;
-	}
-
-	ics->dn = of_node_get(dn);
-	alloc_irq_map(ics);
-
-	for(i = 0; i < ics->count; i++)
-		wsp_mask_real_irq(ics->hwirq_start + i, ics);
-
-	ics->ics.map = wsp_ics_map;
-	ics->ics.mask_unknown = wsp_ics_mask_unknown;
-	ics->ics.get_server = wsp_ics_get_server;
-	ics->ics.host_match = wsp_ics_host_match;
-
-	xics_register_ics(&ics->ics);
-
-	return 0;
-}
-
-static void __init wsp_ics_set_default_server(void)
-{
-	struct device_node *np;
-	u32 hwid;
-
-	/* Find the server number for the boot cpu. */
-	np = of_get_cpu_node(boot_cpuid, NULL);
-	BUG_ON(!np);
-
-	hwid = get_hard_smp_processor_id(boot_cpuid);
-
-	pr_info("wsp_ics: default server is %#x, CPU %s\n", hwid, np->full_name);
-	xics_default_server = hwid;
-
-	of_node_put(np);
-}
-
-static int __init wsp_ics_init(void)
-{
-	struct device_node *dn;
-	struct wsp_ics *ics;
-	int rc, found;
-
-	wsp_ics_set_default_server();
-
-	found = 0;
-	for_each_compatible_node(dn, NULL, "ibm,ppc-xics")
-		found++;
-
-	if (found == 0) {
-		pr_err("wsp_ics: No ICS's found!\n");
-		return -ENODEV;
-	}
-
-	ics_list = kmalloc(sizeof(*ics) * found, GFP_KERNEL);
-	if (!ics_list) {
-		pr_err("wsp_ics: No memory for structs.\n");
-		return -ENOMEM;
-	}
-
-	num_ics = 0;
-	ics = ics_list;
-	for_each_compatible_node(dn, NULL, "ibm,wsp-xics") {
-		rc = wsp_ics_setup(ics, dn);
-		if (rc == 0) {
-			ics++;
-			num_ics++;
-		}
-	}
-
-	if (found != num_ics) {
-		pr_err("wsp_ics: Failed setting up %d ICS's\n",
-			found - num_ics);
-		return -1;
-	}
-
-	return 0;
-}
-
-void __init wsp_init_irq(void)
-{
-	wsp_ics_init();
-	xics_init();
-
-	/* We need to patch our irq chip's EOI to point to the right ICP */
-	wsp_irq_chip.irq_eoi = icp_ops->eoi;
-}
diff --git a/arch/powerpc/platforms/wsp/ics.h b/arch/powerpc/platforms/wsp/ics.h
deleted file mode 100644
index e34d5310264..00000000000
--- a/arch/powerpc/platforms/wsp/ics.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright 2009 IBM Corporation.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ICS_H
-#define __ICS_H
-
-#define XIVE_ADDR_MASK		0x7FFULL
-
-extern void wsp_init_irq(void);
-
-extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
-extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
-
-#endif /* __ICS_H */
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
deleted file mode 100644
index be05631a3c1..00000000000
--- a/arch/powerpc/platforms/wsp/opb_pic.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * IBM Onboard Peripheral Bus Interrupt Controller
- *
- * Copyright 2010 Jack Miller, IBM Corporation.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-
-#include <asm/reg_a2.h>
-#include <asm/irq.h>
-
-#define OPB_NR_IRQS 32
-
-#define OPB_MLSASIER	0x04    /* MLS Accumulated Status IER */
-#define OPB_MLSIR	0x50	/* MLS Interrupt Register */
-#define OPB_MLSIER	0x54	/* MLS Interrupt Enable Register */
-#define OPB_MLSIPR	0x58	/* MLS Interrupt Polarity Register */
-#define OPB_MLSIIR	0x5c	/* MLS Interrupt Inputs Register */
-
-static int opb_index = 0;
-
-struct opb_pic {
-	struct irq_host *host;
-	void *regs;
-	int index;
-	spinlock_t lock;
-};
-
-static u32 opb_in(struct opb_pic *opb, int offset)
-{
-	return in_be32(opb->regs + offset);
-}
-
-static void opb_out(struct opb_pic *opb, int offset, u32 val)
-{
-	out_be32(opb->regs + offset, val);
-}
-
-static void opb_unmask_irq(struct irq_data *d)
-{
-	struct opb_pic *opb;
-	unsigned long flags;
-	u32 ier, bitset;
-
-	opb = d->chip_data;
-	bitset = (1 << (31 - irqd_to_hwirq(d)));
-
-	spin_lock_irqsave(&opb->lock, flags);
-
-	ier = opb_in(opb, OPB_MLSIER);
-	opb_out(opb, OPB_MLSIER, ier | bitset);
-	ier = opb_in(opb, OPB_MLSIER);
-
-	spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static void opb_mask_irq(struct irq_data *d)
-{
-	struct opb_pic *opb;
-	unsigned long flags;
-	u32 ier, mask;
-
-	opb = d->chip_data;
-	mask = ~(1 << (31 - irqd_to_hwirq(d)));
-
-	spin_lock_irqsave(&opb->lock, flags);
-
-	ier = opb_in(opb, OPB_MLSIER);
-	opb_out(opb, OPB_MLSIER, ier & mask);
-	ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
-
-	spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static void opb_ack_irq(struct irq_data *d)
-{
-	struct opb_pic *opb;
-	unsigned long flags;
-	u32 bitset;
-
-	opb = d->chip_data;
-	bitset = (1 << (31 - irqd_to_hwirq(d)));
-
-	spin_lock_irqsave(&opb->lock, flags);
-
-	opb_out(opb, OPB_MLSIR, bitset);
-	opb_in(opb, OPB_MLSIR); // Flush posted writes
-
-	spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static void opb_mask_ack_irq(struct irq_data *d)
-{
-	struct opb_pic *opb;
-	unsigned long flags;
-	u32 bitset;
-	u32 ier, ir;
-
-	opb = d->chip_data;
-	bitset = (1 << (31 - irqd_to_hwirq(d)));
-
-	spin_lock_irqsave(&opb->lock, flags);
-
-	ier = opb_in(opb, OPB_MLSIER);
-	opb_out(opb, OPB_MLSIER, ier & ~bitset);
-	ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
-
-	opb_out(opb, OPB_MLSIR, bitset);
-	ir = opb_in(opb, OPB_MLSIR); // Flush posted writes
-
-	spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static int opb_set_irq_type(struct irq_data *d, unsigned int flow)
-{
-	struct opb_pic *opb;
-	unsigned long flags;
-	int invert, ipr, mask, bit;
-
-	opb = d->chip_data;
-
-	/* The only information we're interested in in the type is whether it's
-	 * a high or low trigger. For high triggered interrupts, the polarity
-	 * set for it in the MLS Interrupt Polarity Register is 0, for low
-	 * interrupts it's 1 so that the proper input in the MLS Interrupt Input
-	 * Register is interrupted as asserting the interrupt. */
-
-	switch (flow) {
-		case IRQ_TYPE_NONE:
-			opb_mask_irq(d);
-			return 0;
-
-		case IRQ_TYPE_LEVEL_HIGH:
-			invert = 0;
-			break;
-
-		case IRQ_TYPE_LEVEL_LOW:
-			invert = 1;
-			break;
-
-		default:
-			return -EINVAL;
-	}
-
-	bit = (1 << (31 - irqd_to_hwirq(d)));
-	mask = ~bit;
-
-	spin_lock_irqsave(&opb->lock, flags);
-
-	ipr = opb_in(opb, OPB_MLSIPR);
-	ipr = (ipr & mask) | (invert ? bit : 0);
-	opb_out(opb, OPB_MLSIPR, ipr);
-	ipr = opb_in(opb, OPB_MLSIPR);  // Flush posted writes
-
-	spin_unlock_irqrestore(&opb->lock, flags);
-
-	/* Record the type in the interrupt descriptor */
-	irqd_set_trigger_type(d, flow);
-
-	return 0;
-}
-
-static struct irq_chip opb_irq_chip = {
-	.name		= "OPB",
-	.irq_mask	= opb_mask_irq,
-	.irq_unmask	= opb_unmask_irq,
-	.irq_mask_ack	= opb_mask_ack_irq,
-	.irq_ack	= opb_ack_irq,
-	.irq_set_type	= opb_set_irq_type
-};
-
-static int opb_host_map(struct irq_host *host, unsigned int virq,
-		irq_hw_number_t hwirq)
-{
-	struct opb_pic *opb;
-
-	opb = host->host_data;
-
-	/* Most of the important stuff is handled by the generic host code, like
-	 * the lookup, so just attach some info to the virtual irq */
-
-	irq_set_chip_data(virq, opb);
-	irq_set_chip_and_handler(virq, &opb_irq_chip, handle_level_irq);
-	irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static int opb_host_xlate(struct irq_host *host, struct device_node *dn,
-		const u32 *intspec, unsigned int intsize,
-		irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
-	/* Interrupt size must == 2 */
-	BUG_ON(intsize != 2);
-	*out_hwirq = intspec[0];
-	*out_type = intspec[1];
-	return 0;
-}
-
-static struct irq_host_ops opb_host_ops = {
-	.map = opb_host_map,
-	.xlate = opb_host_xlate,
-};
-
-irqreturn_t opb_irq_handler(int irq, void *private)
-{
-	struct opb_pic *opb;
-	u32 ir, src, subvirq;
-
-	opb = (struct opb_pic *) private;
-
-	/* Read the OPB MLS Interrupt Register for
-	 * asserted interrupts */
-	ir = opb_in(opb, OPB_MLSIR);
-	if (!ir)
-		return IRQ_NONE;
-
-	do {
-		/* Get 1 - 32 source, *NOT* bit */
-		src = 32 - ffs(ir);
-
-		/* Translate from the OPB's conception of interrupt number to
-		 * Linux's virtual IRQ */
-
-		subvirq = irq_linear_revmap(opb->host, src);
-
-		generic_handle_irq(subvirq);
-	} while ((ir = opb_in(opb, OPB_MLSIR)));
-
-	return IRQ_HANDLED;
-}
-
-struct opb_pic *opb_pic_init_one(struct device_node *dn)
-{
-	struct opb_pic *opb;
-	struct resource res;
-
-	if (of_address_to_resource(dn, 0, &res)) {
-		printk(KERN_ERR "opb: Couldn't translate resource\n");
-		return  NULL;
-	}
-
-	opb = kzalloc(sizeof(struct opb_pic), GFP_KERNEL);
-	if (!opb) {
-		printk(KERN_ERR "opb: Failed to allocate opb struct!\n");
-		return NULL;
-	}
-
-	/* Get access to the OPB MMIO registers */
-	opb->regs = ioremap(res.start + 0x10000, 0x1000);
-	if (!opb->regs) {
-		printk(KERN_ERR "opb: Failed to allocate register space!\n");
-		goto free_opb;
-	}
-
-	/* Allocate an irq host so that Linux knows that despite only
-	 * having one interrupt to issue, we're the controller for multiple
-	 * hardware IRQs, so later we can lookup their virtual IRQs. */
-
-	opb->host = irq_alloc_host(dn, IRQ_HOST_MAP_LINEAR,
-			OPB_NR_IRQS, &opb_host_ops, -1);
-
-	if (!opb->host) {
-		printk(KERN_ERR "opb: Failed to allocate IRQ host!\n");
-		goto free_regs;
-	}
-
-	opb->index = opb_index++;
-	spin_lock_init(&opb->lock);
-	opb->host->host_data = opb;
-
-	/* Disable all interrupts by default */
-	opb_out(opb, OPB_MLSASIER, 0);
-	opb_out(opb, OPB_MLSIER, 0);
-
-	/* ACK any interrupts left by FW */
-	opb_out(opb, OPB_MLSIR, 0xFFFFFFFF);
-
-	return opb;
-
-free_regs:
-	iounmap(opb->regs);
-free_opb:
-	kfree(opb);
-	return NULL;
-}
-
-void __init opb_pic_init(void)
-{
-	struct device_node *dn;
-	struct opb_pic *opb;
-	int virq;
-	int rc;
-
-	/* Call init_one for each OPB device */
-	for_each_compatible_node(dn, NULL, "ibm,opb") {
-
-		/* Fill in an OPB struct */
-		opb = opb_pic_init_one(dn);
-		if (!opb) {
-			printk(KERN_WARNING "opb: Failed to init node, skipped!\n");
-			continue;
-		}
-
-		/* Map / get opb's hardware virtual irq */
-		virq = irq_of_parse_and_map(dn, 0);
-		if (virq <= 0) {
-			printk("opb: irq_op_parse_and_map failed!\n");
-			continue;
-		}
-
-		/* Attach opb interrupt handler to new virtual IRQ */
-		rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
-		if (rc) {
-			printk("opb: request_irq failed: %d\n", rc);
-			continue;
-		}
-
-		printk("OPB%d init with %d IRQs at %p\n", opb->index,
-				OPB_NR_IRQS, opb->regs);
-	}
-}
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
deleted file mode 100644
index 40f28916ff6..00000000000
--- a/arch/powerpc/platforms/wsp/psr2.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-
-#include <asm/machdep.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/udbg.h>
-
-#include "ics.h"
-#include "wsp.h"
-
-
-static void psr2_spin(void)
-{
-	hard_irq_disable();
-	for (;;) ;
-}
-
-static void psr2_restart(char *cmd)
-{
-	psr2_spin();
-}
-
-static int psr2_probe_devices(void)
-{
-	struct device_node *np;
-
-	/* Our RTC is a ds1500. It seems to be programatically compatible
-	 * with the ds1511 for which we have a driver so let's use that
-	 */
-	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
-	if (np != NULL) {
-		struct resource res;
-		if (of_address_to_resource(np, 0, &res) == 0)
-			platform_device_register_simple("ds1511", 0, &res, 1);
-	}
-	return 0;
-}
-machine_arch_initcall(psr2_md, psr2_probe_devices);
-
-static void __init psr2_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	scom_init_wsp();
-
-	/* Setup SMP callback */
-#ifdef CONFIG_SMP
-	a2_setup_smp();
-#endif
-}
-
-static int __init psr2_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
-		return 0;
-
-	return 1;
-}
-
-static void __init psr2_init_irq(void)
-{
-	wsp_init_irq();
-	opb_pic_init();
-}
-
-define_machine(psr2_md) {
-	.name			= "PSR2 A2",
-	.probe			= psr2_probe,
-	.setup_arch		= psr2_setup_arch,
-	.restart		= psr2_restart,
-	.power_off		= psr2_spin,
-	.halt			= psr2_spin,
-	.calibrate_decr		= generic_calibrate_decr,
-	.init_IRQ		= psr2_init_irq,
-	.progress		= udbg_progress,
-	.power_save		= book3e_idle,
-};
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
deleted file mode 100644
index 141e7803209..00000000000
--- a/arch/powerpc/platforms/wsp/scom_smp.c
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * SCOM support for A2 platforms
- *
- * Copyright 2007-2011 Benjamin Herrenschmidt, David Gibson,
- *		       Michael Ellerman, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/cpumask.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <asm/cputhreads.h>
-#include <asm/reg_a2.h>
-#include <asm/scom.h>
-#include <asm/udbg.h>
-
-#include "wsp.h"
-
-#define SCOM_RAMC		0x2a		/* Ram Command */
-#define SCOM_RAMC_TGT1_EXT	0x80000000
-#define SCOM_RAMC_SRC1_EXT	0x40000000
-#define SCOM_RAMC_SRC2_EXT	0x20000000
-#define SCOM_RAMC_SRC3_EXT	0x10000000
-#define SCOM_RAMC_ENABLE	0x00080000
-#define SCOM_RAMC_THREADSEL	0x00060000
-#define SCOM_RAMC_EXECUTE	0x00010000
-#define SCOM_RAMC_MSR_OVERRIDE	0x00008000
-#define SCOM_RAMC_MSR_PR	0x00004000
-#define SCOM_RAMC_MSR_GS	0x00002000
-#define SCOM_RAMC_FORCE		0x00001000
-#define SCOM_RAMC_FLUSH		0x00000800
-#define SCOM_RAMC_INTERRUPT	0x00000004
-#define SCOM_RAMC_ERROR		0x00000002
-#define SCOM_RAMC_DONE		0x00000001
-#define SCOM_RAMI		0x29		/* Ram Instruction */
-#define SCOM_RAMIC		0x28		/* Ram Instruction and Command */
-#define SCOM_RAMIC_INSN		0xffffffff00000000
-#define SCOM_RAMD		0x2d		/* Ram Data */
-#define SCOM_RAMDH		0x2e		/* Ram Data High */
-#define SCOM_RAMDL		0x2f		/* Ram Data Low */
-#define SCOM_PCCR0		0x33		/* PC Configuration Register 0 */
-#define SCOM_PCCR0_ENABLE_DEBUG	0x80000000
-#define SCOM_PCCR0_ENABLE_RAM	0x40000000
-#define SCOM_THRCTL		0x30		/* Thread Control and Status */
-#define SCOM_THRCTL_T0_STOP	0x80000000
-#define SCOM_THRCTL_T1_STOP	0x40000000
-#define SCOM_THRCTL_T2_STOP	0x20000000
-#define SCOM_THRCTL_T3_STOP	0x10000000
-#define SCOM_THRCTL_T0_STEP	0x08000000
-#define SCOM_THRCTL_T1_STEP	0x04000000
-#define SCOM_THRCTL_T2_STEP	0x02000000
-#define SCOM_THRCTL_T3_STEP	0x01000000
-#define SCOM_THRCTL_T0_RUN	0x00800000
-#define SCOM_THRCTL_T1_RUN	0x00400000
-#define SCOM_THRCTL_T2_RUN	0x00200000
-#define SCOM_THRCTL_T3_RUN	0x00100000
-#define SCOM_THRCTL_T0_PM	0x00080000
-#define SCOM_THRCTL_T1_PM	0x00040000
-#define SCOM_THRCTL_T2_PM	0x00020000
-#define SCOM_THRCTL_T3_PM	0x00010000
-#define SCOM_THRCTL_T0_UDE	0x00008000
-#define SCOM_THRCTL_T1_UDE	0x00004000
-#define SCOM_THRCTL_T2_UDE	0x00002000
-#define SCOM_THRCTL_T3_UDE	0x00001000
-#define SCOM_THRCTL_ASYNC_DIS	0x00000800
-#define SCOM_THRCTL_TB_DIS	0x00000400
-#define SCOM_THRCTL_DEC_DIS	0x00000200
-#define SCOM_THRCTL_AND		0x31		/* Thread Control and Status */
-#define SCOM_THRCTL_OR		0x32		/* Thread Control and Status */
-
-
-static DEFINE_PER_CPU(scom_map_t, scom_ptrs);
-
-static scom_map_t get_scom(int cpu, struct device_node *np, int *first_thread)
-{
-	scom_map_t scom = per_cpu(scom_ptrs, cpu);
-	int tcpu;
-
-	if (scom_map_ok(scom)) {
-		*first_thread = 0;
-		return scom;
-	}
-
-	*first_thread = 1;
-
-	scom = scom_map_device(np, 0);
-
-	for (tcpu = cpu_first_thread_sibling(cpu);
-	     tcpu <= cpu_last_thread_sibling(cpu); tcpu++)
-		per_cpu(scom_ptrs, tcpu) = scom;
-
-	/* Hack: for the boot core, this will actually get called on
-	 * the second thread up, not the first so our test above will
-	 * set first_thread incorrectly. */
-	if (cpu_first_thread_sibling(cpu) == 0)
-		*first_thread = 0;
-
-	return scom;
-}
-
-static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask)
-{
-	u64 cmd, mask, val;
-	int n = 0;
-
-	cmd = ((u64)insn << 32) | (((u64)extmask & 0xf) << 28)
-		| ((u64)thread << 17) | SCOM_RAMC_ENABLE | SCOM_RAMC_EXECUTE;
-	mask = SCOM_RAMC_DONE | SCOM_RAMC_INTERRUPT | SCOM_RAMC_ERROR;
-
-	scom_write(scom, SCOM_RAMIC, cmd);
-
-	while (!((val = scom_read(scom, SCOM_RAMC)) & mask)) {
-		pr_devel("Waiting on RAMC = 0x%llx\n", val);
-		if (++n == 3) {
-			pr_err("RAMC timeout on instruction 0x%08x, thread %d\n",
-			       insn, thread);
-			return -1;
-		}
-	}
-
-	if (val & SCOM_RAMC_INTERRUPT) {
-		pr_err("RAMC interrupt on instruction 0x%08x, thread %d\n",
-		       insn, thread);
-		return -SCOM_RAMC_INTERRUPT;
-	}
-
-	if (val & SCOM_RAMC_ERROR) {
-		pr_err("RAMC error on instruction 0x%08x, thread %d\n",
-		       insn, thread);
-		return -SCOM_RAMC_ERROR;
-	}
-
-	return 0;
-}
-
-static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt,
-			  u64 *out_gpr)
-{
-	int rc;
-
-	/* or rN, rN, rN */
-	u32 insn = 0x7c000378 | (gpr << 21) | (gpr << 16) | (gpr << 11);
-	rc = a2_scom_ram(scom, thread, insn, alt ? 0xf : 0x0);
-	if (rc)
-		return rc;
-
-	*out_gpr = scom_read(scom, SCOM_RAMD);
-
-	return 0;
-}
-
-static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr)
-{
-	int rc, sprhi, sprlo;
-	u32 insn;
-
-	sprhi = spr >> 5;
-	sprlo = spr & 0x1f;
-	insn = 0x7c2002a6 | (sprlo << 16) | (sprhi << 11); /* mfspr r1,spr */
-
-	if (spr == 0x0ff0)
-		insn = 0x7c2000a6; /* mfmsr r1 */
-
-	rc = a2_scom_ram(scom, thread, insn, 0xf);
-	if (rc)
-		return rc;
-	return a2_scom_getgpr(scom, thread, 1, 1, out_spr);
-}
-
-static int a2_scom_setgpr(scom_map_t scom, int thread, int gpr,
-			  int alt, u64 val)
-{
-	u32 lis = 0x3c000000 | (gpr << 21);
-	u32 li = 0x38000000 | (gpr << 21);
-	u32 oris = 0x64000000 | (gpr << 21) | (gpr << 16);
-	u32 ori = 0x60000000 | (gpr << 21) | (gpr << 16);
-	u32 rldicr32 = 0x780007c6 | (gpr << 21) | (gpr << 16);
-	u32 highest = val >> 48;
-	u32 higher = (val >> 32) & 0xffff;
-	u32 high = (val >> 16) & 0xffff;
-	u32 low = val & 0xffff;
-	int lext = alt ? 0x8 : 0x0;
-	int oext = alt ? 0xf : 0x0;
-	int rc = 0;
-
-	if (highest)
-		rc |= a2_scom_ram(scom, thread, lis | highest, lext);
-
-	if (higher) {
-		if (highest)
-			rc |= a2_scom_ram(scom, thread, oris | higher, oext);
-		else
-			rc |= a2_scom_ram(scom, thread, li | higher, lext);
-	}
-
-	if (highest || higher)
-		rc |= a2_scom_ram(scom, thread, rldicr32, oext);
-
-	if (high) {
-		if (highest || higher)
-			rc |= a2_scom_ram(scom, thread, oris | high, oext);
-		else
-			rc |= a2_scom_ram(scom, thread, lis | high, lext);
-	}
-
-	if (highest || higher || high)
-		rc |= a2_scom_ram(scom, thread, ori | low, oext);
-	else
-		rc |= a2_scom_ram(scom, thread, li | low, lext);
-
-	return rc;
-}
-
-static int a2_scom_setspr(scom_map_t scom, int thread, int spr, u64 val)
-{
-	int sprhi = spr >> 5;
-	int sprlo = spr & 0x1f;
-	/* mtspr spr, r1 */
-	u32 insn = 0x7c2003a6 | (sprlo << 16) | (sprhi << 11);
-
-	if (spr == 0x0ff0)
-		insn = 0x7c200124; /* mtmsr r1 */
-
-	if (a2_scom_setgpr(scom, thread, 1, 1, val))
-		return -1;
-
-	return a2_scom_ram(scom, thread, insn, 0xf);
-}
-
-static int a2_scom_initial_tlb(scom_map_t scom, int thread)
-{
-	extern u32 a2_tlbinit_code_start[], a2_tlbinit_code_end[];
-	extern u32 a2_tlbinit_after_iprot_flush[];
-	extern u32 a2_tlbinit_after_linear_map[];
-	u32 assoc, entries, i;
-	u64 epn, tlbcfg;
-	u32 *p;
-	int rc;
-
-	/* Invalidate all entries (including iprot) */
-
-	rc = a2_scom_getspr(scom, thread, SPRN_TLB0CFG, &tlbcfg);
-	if (rc)
-		goto scom_fail;
-	entries = tlbcfg & TLBnCFG_N_ENTRY;
-	assoc = (tlbcfg & TLBnCFG_ASSOC) >> 24;
-	epn = 0;
-
-	/* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
-	a2_scom_setspr(scom, thread, SPRN_MMUCR2, 0x000a7531);
-	/* Set MMUCR3 to write all thids bit to the TLB */
-	a2_scom_setspr(scom, thread, SPRN_MMUCR3, 0x0000000f);
-
-	/* Set MAS1 for 1G page size, and MAS2 to our initial EPN */
-	a2_scom_setspr(scom, thread, SPRN_MAS1, MAS1_TSIZE(BOOK3E_PAGESZ_1GB));
-	a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
-	for (i = 0; i < entries; i++) {
-
-		a2_scom_setspr(scom, thread, SPRN_MAS0, MAS0_ESEL(i % assoc));
-
-		/* tlbwe */
-		rc = a2_scom_ram(scom, thread, 0x7c0007a4, 0);
-		if (rc)
-			goto scom_fail;
-
-		/* Next entry is new address? */
-		if((i + 1) % assoc == 0) {
-			epn += (1 << 30);
-			a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
-		}
-	}
-
-	/* Setup args for linear mapping */
-	rc = a2_scom_setgpr(scom, thread, 3, 0, MAS0_TLBSEL(0));
-	if (rc)
-		goto scom_fail;
-
-	/* Linear mapping */
-	for (p = a2_tlbinit_code_start; p < a2_tlbinit_after_linear_map; p++) {
-		rc = a2_scom_ram(scom, thread, *p, 0);
-		if (rc)
-			goto scom_fail;
-	}
-
-	/*
-	 * For the boot thread, between the linear mapping and the debug
-	 * mappings there is a loop to flush iprot mappings. Ramming doesn't do
-	 * branches, but the secondary threads don't need to be nearly as smart
-	 * (i.e. we don't need to worry about invalidating the mapping we're
-	 * standing on).
-	 */
-
-	/* Debug mappings. Expects r11 = MAS0 from linear map (set above) */
-	for (p = a2_tlbinit_after_iprot_flush; p < a2_tlbinit_code_end; p++) {
-		rc = a2_scom_ram(scom, thread, *p, 0);
-		if (rc)
-			goto scom_fail;
-	}
-
-scom_fail:
-	if (rc)
-		pr_err("Setting up initial TLB failed, err %d\n", rc);
-
-	if (rc == -SCOM_RAMC_INTERRUPT) {
-		/* Interrupt, dump some status */
-		int rc[10];
-		u64 iar, srr0, srr1, esr, mas0, mas1, mas2, mas7_3, mas8, ccr2;
-		rc[0] = a2_scom_getspr(scom, thread, SPRN_IAR, &iar);
-		rc[1] = a2_scom_getspr(scom, thread, SPRN_SRR0, &srr0);
-		rc[2] = a2_scom_getspr(scom, thread, SPRN_SRR1, &srr1);
-		rc[3] = a2_scom_getspr(scom, thread, SPRN_ESR, &esr);
-		rc[4] = a2_scom_getspr(scom, thread, SPRN_MAS0, &mas0);
-		rc[5] = a2_scom_getspr(scom, thread, SPRN_MAS1, &mas1);
-		rc[6] = a2_scom_getspr(scom, thread, SPRN_MAS2, &mas2);
-		rc[7] = a2_scom_getspr(scom, thread, SPRN_MAS7_MAS3, &mas7_3);
-		rc[8] = a2_scom_getspr(scom, thread, SPRN_MAS8, &mas8);
-		rc[9] = a2_scom_getspr(scom, thread, SPRN_A2_CCR2, &ccr2);
-		pr_err(" -> retreived IAR =0x%llx (err %d)\n", iar, rc[0]);
-		pr_err("    retreived SRR0=0x%llx (err %d)\n", srr0, rc[1]);
-		pr_err("    retreived SRR1=0x%llx (err %d)\n", srr1, rc[2]);
-		pr_err("    retreived ESR =0x%llx (err %d)\n", esr, rc[3]);
-		pr_err("    retreived MAS0=0x%llx (err %d)\n", mas0, rc[4]);
-		pr_err("    retreived MAS1=0x%llx (err %d)\n", mas1, rc[5]);
-		pr_err("    retreived MAS2=0x%llx (err %d)\n", mas2, rc[6]);
-		pr_err("    retreived MS73=0x%llx (err %d)\n", mas7_3, rc[7]);
-		pr_err("    retreived MAS8=0x%llx (err %d)\n", mas8, rc[8]);
-		pr_err("    retreived CCR2=0x%llx (err %d)\n", ccr2, rc[9]);
-	}
-
-	return rc;
-}
-
-int __devinit a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
-				  struct device_node *np)
-{
-	u64 init_iar, init_msr, init_ccr2;
-	unsigned long start_here;
-	int rc, core_setup;
-	scom_map_t scom;
-	u64 pccr0;
-
-	scom = get_scom(lcpu, np, &core_setup);
-	if (!scom) {
-		printk(KERN_ERR "Couldn't map SCOM for CPU%d\n", lcpu);
-		return -1;
-	}
-
-	pr_devel("Bringing up CPU%d using SCOM...\n", lcpu);
-
-	pccr0 = scom_read(scom, SCOM_PCCR0);
-	scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG |
-				     SCOM_PCCR0_ENABLE_RAM);
-
-	/* Stop the thead with THRCTL. If we are setting up the TLB we stop all
-	 * threads. We also disable asynchronous interrupts while RAMing.
-	 */
-	if (core_setup)
-		scom_write(scom, SCOM_THRCTL_OR,
-			      SCOM_THRCTL_T0_STOP |
-			      SCOM_THRCTL_T1_STOP |
-			      SCOM_THRCTL_T2_STOP |
-			      SCOM_THRCTL_T3_STOP |
-			      SCOM_THRCTL_ASYNC_DIS);
-	else
-		scom_write(scom, SCOM_THRCTL_OR, SCOM_THRCTL_T0_STOP >> thr_idx);
-
-	/* Flush its pipeline just in case */
-	scom_write(scom, SCOM_RAMC, ((u64)thr_idx << 17) |
-		      SCOM_RAMC_FLUSH | SCOM_RAMC_ENABLE);
-
-	a2_scom_getspr(scom, thr_idx, SPRN_IAR, &init_iar);
-	a2_scom_getspr(scom, thr_idx, 0x0ff0, &init_msr);
-	a2_scom_getspr(scom, thr_idx, SPRN_A2_CCR2, &init_ccr2);
-
-	/* Set MSR to MSR_CM (0x0ff0 is magic value for MSR_CM) */
-	rc = a2_scom_setspr(scom, thr_idx, 0x0ff0, MSR_CM);
-	if (rc) {
-		pr_err("Failed to set MSR ! err %d\n", rc);
-		return rc;
-	}
-
-	/* RAM in an sync/isync for the sake of it */
-	a2_scom_ram(scom, thr_idx, 0x7c0004ac, 0);
-	a2_scom_ram(scom, thr_idx, 0x4c00012c, 0);
-
-	if (core_setup) {
-		pr_devel("CPU%d is first thread in core, initializing TLB...\n",
-			 lcpu);
-		rc = a2_scom_initial_tlb(scom, thr_idx);
-		if (rc)
-			goto fail;
-	}
-
-	start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
-					: generic_secondary_thread_init);
-	pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
-
-	rc |= a2_scom_setspr(scom, thr_idx, SPRN_IAR, start_here);
-	rc |= a2_scom_setgpr(scom, thr_idx, 3, 0,
-			     get_hard_smp_processor_id(lcpu));
-	/*
-	 * Tell book3e_secondary_core_init not to set up the TLB, we've
-	 * already done that.
-	 */
-	rc |= a2_scom_setgpr(scom, thr_idx, 4, 0, 1);
-
-	rc |= a2_scom_setspr(scom, thr_idx, SPRN_TENS, 0x1 << thr_idx);
-
-	scom_write(scom, SCOM_RAMC, 0);
-	scom_write(scom, SCOM_THRCTL_AND, ~(SCOM_THRCTL_T0_STOP >> thr_idx));
-	scom_write(scom, SCOM_PCCR0, pccr0);
-fail:
-	pr_devel("  SCOM initialization %s\n", rc ? "failed" : "succeeded");
-	if (rc) {
-		pr_err("Old IAR=0x%08llx MSR=0x%08llx CCR2=0x%08llx\n",
-		       init_iar, init_msr, init_ccr2);
-	}
-
-	return rc;
-}
diff --git a/arch/powerpc/platforms/wsp/scom_wsp.c b/arch/powerpc/platforms/wsp/scom_wsp.c
deleted file mode 100644
index 4052e2259f3..00000000000
--- a/arch/powerpc/platforms/wsp/scom_wsp.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  SCOM backend for WSP
- *
- *  Copyright 2010 Benjamin Herrenschmidt, IBM Corp.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/cpumask.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <asm/cputhreads.h>
-#include <asm/reg_a2.h>
-#include <asm/scom.h>
-#include <asm/udbg.h>
-
-#include "wsp.h"
-
-
-static scom_map_t wsp_scom_map(struct device_node *dev, u64 reg, u64 count)
-{
-	struct resource r;
-	u64 xscom_addr;
-
-	if (!of_get_property(dev, "scom-controller", NULL)) {
-		pr_err("%s: device %s is not a SCOM controller\n",
-			__func__, dev->full_name);
-		return SCOM_MAP_INVALID;
-	}
-
-	if (of_address_to_resource(dev, 0, &r)) {
-		pr_debug("Failed to find SCOM controller address\n");
-		return 0;
-	}
-
-	/* Transform the SCOM address into an XSCOM offset */
-	xscom_addr = ((reg & 0x7f000000) >> 1) | ((reg & 0xfffff) << 3);
-
-	return (scom_map_t)ioremap(r.start + xscom_addr, count << 3);
-}
-
-static void wsp_scom_unmap(scom_map_t map)
-{
-	iounmap((void *)map);
-}
-
-static u64 wsp_scom_read(scom_map_t map, u32 reg)
-{
-	u64 __iomem *addr = (u64 __iomem *)map;
-
-	return in_be64(addr + reg);
-}
-
-static void wsp_scom_write(scom_map_t map, u32 reg, u64 value)
-{
-	u64 __iomem *addr = (u64 __iomem *)map;
-
-	return out_be64(addr + reg, value);
-}
-
-static const struct scom_controller wsp_scom_controller = {
-	.map	= wsp_scom_map,
-	.unmap	= wsp_scom_unmap,
-	.read	= wsp_scom_read,
-	.write	= wsp_scom_write
-};
-
-void scom_init_wsp(void)
-{
-	scom_init(&wsp_scom_controller);
-}
diff --git a/arch/powerpc/platforms/wsp/setup.c b/arch/powerpc/platforms/wsp/setup.c
deleted file mode 100644
index 11ac2f05e01..00000000000
--- a/arch/powerpc/platforms/wsp/setup.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2010 Michael Ellerman, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-
-#include "wsp.h"
-
-/*
- * Find chip-id by walking up device tree looking for ibm,wsp-chip-id property.
- * Won't work for nodes that are not a descendant of a wsp node.
- */
-int wsp_get_chip_id(struct device_node *dn)
-{
-	const u32 *p;
-	int rc;
-
-	/* Start looking at the specified node, not its parent */
-	dn = of_node_get(dn);
-	while (dn && !(p = of_get_property(dn, "ibm,wsp-chip-id", NULL)))
-		dn = of_get_next_parent(dn);
-
-	if (!dn)
-		return -1;
-
-	rc = *p;
-	of_node_put(dn);
-
-	return rc;
-}
diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
deleted file mode 100644
index 9d20fa9d371..00000000000
--- a/arch/powerpc/platforms/wsp/smp.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  SMP Support for A2 platforms
- *
- *  Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-
-#include <asm/dbell.h>
-#include <asm/machdep.h>
-#include <asm/xics.h>
-
-#include "ics.h"
-#include "wsp.h"
-
-static void __devinit smp_a2_setup_cpu(int cpu)
-{
-	doorbell_setup_this_cpu();
-
-	if (cpu != boot_cpuid)
-		xics_setup_cpu();
-}
-
-int __devinit smp_a2_kick_cpu(int nr)
-{
-	const char *enable_method;
-	struct device_node *np;
-	int thr_idx;
-
-	if (nr < 0 || nr >= NR_CPUS)
-		return -ENOENT;
-
-	np = of_get_cpu_node(nr, &thr_idx);
-	if (!np)
-		return -ENODEV;
-
-	enable_method = of_get_property(np, "enable-method", NULL);
-	pr_devel("CPU%d has enable-method: \"%s\"\n", nr, enable_method);
-
-	if (!enable_method) {
-                printk(KERN_ERR "CPU%d has no enable-method\n", nr);
-		return -ENOENT;
-	} else if (strcmp(enable_method, "ibm,a2-scom") == 0) {
-		if (a2_scom_startup_cpu(nr, thr_idx, np))
-			return -1;
-	} else {
-		printk(KERN_ERR "CPU%d: Don't understand enable-method \"%s\"\n",
-                       nr, enable_method);
-		return -EINVAL;
-	}
-
-	/*
-	 * The processor is currently spinning, waiting for the
-	 * cpu_start field to become non-zero After we set cpu_start,
-	 * the processor will continue on to secondary_start
-	 */
-	paca[nr].cpu_start = 1;
-
-	return 0;
-}
-
-static int __init smp_a2_probe(void)
-{
-	return cpus_weight(cpu_possible_map);
-}
-
-static struct smp_ops_t a2_smp_ops = {
-	.message_pass	= smp_muxed_ipi_message_pass,
-	.cause_ipi	= doorbell_cause_ipi,
-	.probe		= smp_a2_probe,
-	.kick_cpu	= smp_a2_kick_cpu,
-	.setup_cpu	= smp_a2_setup_cpu,
-};
-
-void __init a2_setup_smp(void)
-{
-	smp_ops = &a2_smp_ops;
-}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
deleted file mode 100644
index 7c3e087fd2f..00000000000
--- a/arch/powerpc/platforms/wsp/wsp.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __WSP_H
-#define __WSP_H
-
-#include <asm/wsp.h>
-
-extern void wsp_setup_pci(void);
-extern void scom_init_wsp(void);
-
-extern void a2_setup_smp(void);
-extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
-			       struct device_node *np);
-int smp_a2_cpu_bootable(unsigned int nr);
-int __devinit smp_a2_kick_cpu(int nr);
-
-void opb_pic_init(void);
-
-#endif /*  __WSP_H */