1 files changed, 284 insertions, 88 deletions

diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 8752f79a6af..0bec0c02c5e 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -81,15 +81,19 @@ static int pseries_eeh_init(void)
 	ibm_get_config_addr_info2	= rtas_token("ibm,get-config-addr-info2");
 	ibm_get_config_addr_info	= rtas_token("ibm,get-config-addr-info");
 	ibm_configure_pe		= rtas_token("ibm,configure-pe");
-	ibm_configure_bridge		= rtas_token ("ibm,configure-bridge");
+	ibm_configure_bridge		= rtas_token("ibm,configure-bridge");
 
-	/* necessary sanity check */
+	/*
+	 * Necessary sanity check. We needn't check "get-config-addr-info"
+	 * and its variant since the old firmware probably support address
+	 * of domain/bus/slot/function for EEH RTAS operations.
+	 */
 	if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) {
 		pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n",
 			__func__);
 		return -EINVAL;
 	} else if (ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE) {
-		pr_warning("%s: RTAS service <ibm, set-slot-reset> invalid\n",
+		pr_warning("%s: RTAS service <ibm,set-slot-reset> invalid\n",
 			__func__);
 		return -EINVAL;
 	} else if (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
@@ -102,12 +106,6 @@ static int pseries_eeh_init(void)
 		pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n",
 			__func__);
 		return -EINVAL;
-	} else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE &&
-		   ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) {
-		pr_warning("%s: RTAS service <ibm,get-config-addr-info2> and "
-			"<ibm,get-config-addr-info> invalid\n",
-			__func__);
-		return -EINVAL;
 	} else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE &&
 		   ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) {
 		pr_warning("%s: RTAS service <ibm,configure-pe> and "
@@ -129,27 +127,213 @@ static int pseries_eeh_init(void)
 		eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
 	}
 
+	/* Set EEH probe mode */
+	eeh_probe_mode_set(EEH_PROBE_MODE_DEVTREE);
+
+	return 0;
+}
+
+static int pseries_eeh_cap_start(struct device_node *dn)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	u32 status;
+
+	if (!pdn)
+		return 0;
+
+	rtas_read_config(pdn, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	return PCI_CAPABILITY_LIST;
+}
+
+
+static int pseries_eeh_find_cap(struct device_node *dn, int cap)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	int pos = pseries_eeh_cap_start(dn);
+	int cnt = 48;	/* Maximal number of capabilities */
+	u32 id;
+
+	if (!pos)
+		return 0;
+
+        while (cnt--) {
+		rtas_read_config(pdn, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+		pos &= ~3;
+		rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+		pos += PCI_CAP_LIST_NEXT;
+	}
+
+	return 0;
+}
+
+static int pseries_eeh_find_ecap(struct device_node *dn, int cap)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	u32 header;
+	int pos = 256;
+	int ttl = (4096 - 256) / 8;
+
+	if (!edev || !edev->pcie_cap)
+		return 0;
+	if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+		return 0;
+	else if (!header)
+		return 0;
+
+	while (ttl-- > 0) {
+		if (PCI_EXT_CAP_ID(header) == cap && pos)
+			return pos;
+
+		pos = PCI_EXT_CAP_NEXT(header);
+		if (pos < 256)
+			break;
+
+		if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+			break;
+	}
+
 	return 0;
 }
 
 /**
+ * pseries_eeh_of_probe - EEH probe on the given device
+ * @dn: OF node
+ * @flag: Unused
+ *
+ * When EEH module is installed during system boot, all PCI devices
+ * are checked one by one to see if it supports EEH. The function
+ * is introduced for the purpose.
+ */
+static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
+{
+	struct eeh_dev *edev;
+	struct eeh_pe pe;
+	struct pci_dn *pdn = PCI_DN(dn);
+	const __be32 *classp, *vendorp, *devicep;
+	u32 class_code;
+	const __be32 *regs;
+	u32 pcie_flags;
+	int enable = 0;
+	int ret;
+
+	/* Retrieve OF node and eeh device */
+	edev = of_node_to_eeh_dev(dn);
+	if (edev->pe || !of_device_is_available(dn))
+		return NULL;
+
+	/* Retrieve class/vendor/device IDs */
+	classp = of_get_property(dn, "class-code", NULL);
+	vendorp = of_get_property(dn, "vendor-id", NULL);
+	devicep = of_get_property(dn, "device-id", NULL);
+
+	/* Skip for bad OF node or PCI-ISA bridge */
+	if (!classp || !vendorp || !devicep)
+		return NULL;
+	if (dn->type && !strcmp(dn->type, "isa"))
+		return NULL;
+
+	class_code = of_read_number(classp, 1);
+
+	/*
+	 * Update class code and mode of eeh device. We need
+	 * correctly reflects that current device is root port
+	 * or PCIe switch downstream port.
+	 */
+	edev->class_code = class_code;
+	edev->pcix_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_PCIX);
+	edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
+	edev->aer_cap = pseries_eeh_find_ecap(dn, PCI_EXT_CAP_ID_ERR);
+	edev->mode &= 0xFFFFFF00;
+	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		edev->mode |= EEH_DEV_BRIDGE;
+		if (edev->pcie_cap) {
+			rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+					 2, &pcie_flags);
+			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+				edev->mode |= EEH_DEV_ROOT_PORT;
+			else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+				edev->mode |= EEH_DEV_DS_PORT;
+		}
+	}
+
+	/* Retrieve the device address */
+	regs = of_get_property(dn, "reg", NULL);
+	if (!regs) {
+		pr_warning("%s: OF node property %s::reg not found\n",
+			__func__, dn->full_name);
+		return NULL;
+	}
+
+	/* Initialize the fake PE */
+	memset(&pe, 0, sizeof(struct eeh_pe));
+	pe.phb = edev->phb;
+	pe.config_addr = of_read_number(regs, 1);
+
+	/* Enable EEH on the device */
+	ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
+	if (!ret) {
+		edev->config_addr = of_read_number(regs, 1);
+		/* Retrieve PE address */
+		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
+		pe.addr = edev->pe_config_addr;
+
+		/* Some older systems (Power4) allow the ibm,set-eeh-option
+		 * call to succeed even on nodes where EEH is not supported.
+		 * Verify support explicitly.
+		 */
+		ret = eeh_ops->get_state(&pe, NULL);
+		if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
+			enable = 1;
+
+		if (enable) {
+			eeh_set_enable(true);
+			eeh_add_to_parent_pe(edev);
+
+			pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n",
+				__func__, dn->full_name, pe.phb->global_number,
+				pe.addr, pe.config_addr);
+		} else if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
+			   (of_node_to_eeh_dev(dn->parent))->pe) {
+			/* This device doesn't support EEH, but it may have an
+			 * EEH parent, in which case we mark it as supported.
+			 */
+			edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
+			edev->pe_config_addr = of_node_to_eeh_dev(dn->parent)->pe_config_addr;
+			eeh_add_to_parent_pe(edev);
+		}
+	}
+
+	/* Save memory bars */
+	eeh_save_bars(edev);
+
+	return NULL;
+}
+
+/**
  * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
- * @dn: device node
+ * @pe: EEH PE
  * @option: operation to be issued
  *
  * The function is used to control the EEH functionality globally.
  * Currently, following options are support according to PAPR:
  * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
  */
-static int pseries_eeh_set_option(struct device_node *dn, int option)
+static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
 {
 	int ret = 0;
-	struct eeh_dev *edev;
-	const u32 *reg;
 	int config_addr;
 
-	edev = of_node_to_eeh_dev(dn);
-
 	/*
 	 * When we're enabling or disabling EEH functioality on
 	 * the particular PE, the PE config address is possibly
@@ -159,15 +343,11 @@ static int pseries_eeh_set_option(struct device_node *dn, int option)
 	switch (option) {
 	case EEH_OPT_DISABLE:
 	case EEH_OPT_ENABLE:
-		reg = of_get_property(dn, "reg", NULL);
-		config_addr = reg[0];
-		break;
-
 	case EEH_OPT_THAW_MMIO:
 	case EEH_OPT_THAW_DMA:
-		config_addr = edev->config_addr;
-		if (edev->pe_config_addr)
-			config_addr = edev->pe_config_addr;
+		config_addr = pe->config_addr;
+		if (pe->addr)
+			config_addr = pe->addr;
 		break;
 
 	default:
@@ -177,15 +357,15 @@ static int pseries_eeh_set_option(struct device_node *dn, int option)
 	}
 
 	ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
-			config_addr, BUID_HI(edev->phb->buid),
-			BUID_LO(edev->phb->buid), option);
+			config_addr, BUID_HI(pe->phb->buid),
+			BUID_LO(pe->phb->buid), option);
 
 	return ret;
 }
 
 /**
  * pseries_eeh_get_pe_addr - Retrieve PE address
- * @dn: device node
+ * @pe: EEH PE
  *
  * Retrieve the assocated PE address. Actually, there're 2 RTAS
  * function calls dedicated for the purpose. We need implement
@@ -196,14 +376,11 @@ static int pseries_eeh_set_option(struct device_node *dn, int option)
  * It's notable that zero'ed return value means invalid PE config
  * address.
  */
-static int pseries_eeh_get_pe_addr(struct device_node *dn)
+static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
 {
-	struct eeh_dev *edev;
 	int ret = 0;
 	int rets[3];
 
-	edev = of_node_to_eeh_dev(dn);
-
 	if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
 		/*
 		 * First of all, we need to make sure there has one PE
@@ -211,18 +388,18 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
 		 * meaningless.
 		 */
 		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-				edev->config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid), 1);
+				pe->config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), 1);
 		if (ret || (rets[0] == 0))
 			return 0;
 
 		/* Retrieve the associated PE config address */
 		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-				edev->config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid), 0);
+				pe->config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), 0);
 		if (ret) {
-			pr_warning("%s: Failed to get PE address for %s\n",
-				__func__, dn->full_name);
+			pr_warning("%s: Failed to get address for PHB#%d-PE#%x\n",
+				__func__, pe->phb->global_number, pe->config_addr);
 			return 0;
 		}
 
@@ -231,11 +408,11 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
 
 	if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
 		ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
-				edev->config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid), 0);
+				pe->config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), 0);
 		if (ret) {
-			pr_warning("%s: Failed to get PE address for %s\n",
-				__func__, dn->full_name);
+			pr_warning("%s: Failed to get address for PHB#%d-PE#%x\n",
+				__func__, pe->phb->global_number, pe->config_addr);
 			return 0;
 		}
 
@@ -247,7 +424,7 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
 
 /**
  * pseries_eeh_get_state - Retrieve PE state
- * @dn: PE associated device node
+ * @pe: EEH PE
  * @state: return value
  *
  * Retrieve the state of the specified PE. On RTAS compliant
@@ -258,30 +435,28 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
  * RTAS calls for the purpose, we need to try the new one and back
  * to the old one if the new one couldn't work properly.
  */
-static int pseries_eeh_get_state(struct device_node *dn, int *state)
+static int pseries_eeh_get_state(struct eeh_pe *pe, int *state)
 {
-	struct eeh_dev *edev;
 	int config_addr;
 	int ret;
 	int rets[4];
 	int result;
 
 	/* Figure out PE config address if possible */
-	edev = of_node_to_eeh_dev(dn);
-	config_addr = edev->config_addr;
-	if (edev->pe_config_addr)
-		config_addr = edev->pe_config_addr;
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
 
 	if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
 		ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid));
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
 	} else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) {
 		/* Fake PE unavailable info */
 		rets[2] = 0;
 		ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid));
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
 	} else {
 		return EEH_STATE_NOT_SUPPORT;
 	}
@@ -321,6 +496,7 @@ static int pseries_eeh_get_state(struct device_node *dn, int *state)
 			} else {
 				result = EEH_STATE_NOT_SUPPORT;
 			}
+			break;
 		default:
 			result = EEH_STATE_NOT_SUPPORT;
 		}
@@ -333,48 +509,54 @@ static int pseries_eeh_get_state(struct device_node *dn, int *state)
 
 /**
  * pseries_eeh_reset - Reset the specified PE
- * @dn: PE associated device node
+ * @pe: EEH PE
  * @option: reset option
  *
  * Reset the specified PE
  */
-static int pseries_eeh_reset(struct device_node *dn, int option)
+static int pseries_eeh_reset(struct eeh_pe *pe, int option)
 {
-	struct eeh_dev *edev;
 	int config_addr;
 	int ret;
 
 	/* Figure out PE address */
-	edev = of_node_to_eeh_dev(dn);
-	config_addr = edev->config_addr;
-	if (edev->pe_config_addr)
-		config_addr = edev->pe_config_addr;
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
 
 	/* Reset PE through RTAS call */
 	ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
-			config_addr, BUID_HI(edev->phb->buid),
-			BUID_LO(edev->phb->buid), option);
+			config_addr, BUID_HI(pe->phb->buid),
+			BUID_LO(pe->phb->buid), option);
 
 	/* If fundamental-reset not supported, try hot-reset */
 	if (option == EEH_RESET_FUNDAMENTAL &&
 	    ret == -8) {
+		option = EEH_RESET_HOT;
 		ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid), EEH_RESET_HOT);
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), option);
 	}
 
+	/* We need reset hold or settlement delay */
+	if (option == EEH_RESET_FUNDAMENTAL ||
+	    option == EEH_RESET_HOT)
+		msleep(EEH_PE_RST_HOLD_TIME);
+	else
+		msleep(EEH_PE_RST_SETTLE_TIME);
+
 	return ret;
 }
 
 /**
  * pseries_eeh_wait_state - Wait for PE state
- * @dn: PE associated device node
+ * @pe: EEH PE
  * @max_wait: maximal period in microsecond
  *
  * Wait for the state of associated PE. It might take some time
  * to retrieve the PE's state.
  */
-static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
+static int pseries_eeh_wait_state(struct eeh_pe *pe, int max_wait)
 {
 	int ret;
 	int mwait;
@@ -391,7 +573,7 @@ static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
 #define EEH_STATE_MAX_WAIT_TIME	(300 * 1000)
 
 	while (1) {
-		ret = pseries_eeh_get_state(dn, &mwait);
+		ret = pseries_eeh_get_state(pe, &mwait);
 
 		/*
 		 * If the PE's state is temporarily unavailable,
@@ -426,7 +608,7 @@ static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
 
 /**
  * pseries_eeh_get_log - Retrieve error log
- * @dn: device node
+ * @pe: EEH PE
  * @severity: temporary or permanent error log
  * @drv_log: driver log to be combined with retrieved error log
  * @len: length of driver log
@@ -435,24 +617,22 @@ static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
  * Actually, the error will be retrieved through the dedicated
  * RTAS call.
  */
-static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_log, unsigned long len)
+static int pseries_eeh_get_log(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len)
 {
-	struct eeh_dev *edev;
 	int config_addr;
 	unsigned long flags;
 	int ret;
 
-	edev = of_node_to_eeh_dev(dn);
 	spin_lock_irqsave(&slot_errbuf_lock, flags);
 	memset(slot_errbuf, 0, eeh_error_buf_size);
 
 	/* Figure out the PE address */
-	config_addr = edev->config_addr;
-	if (edev->pe_config_addr)
-		config_addr = edev->pe_config_addr;
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
 
 	ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr,
-			BUID_HI(edev->phb->buid), BUID_LO(edev->phb->buid),
+			BUID_HI(pe->phb->buid), BUID_LO(pe->phb->buid),
 			virt_to_phys(drv_log), len,
 			virt_to_phys(slot_errbuf), eeh_error_buf_size,
 			severity);
@@ -465,40 +645,38 @@ static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_l
 
 /**
  * pseries_eeh_configure_bridge - Configure PCI bridges in the indicated PE
- * @dn: PE associated device node
+ * @pe: EEH PE
  *
  * The function will be called to reconfigure the bridges included
  * in the specified PE so that the mulfunctional PE would be recovered
  * again.
  */
-static int pseries_eeh_configure_bridge(struct device_node *dn)
+static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
 {
-	struct eeh_dev *edev;
 	int config_addr;
 	int ret;
 
 	/* Figure out the PE address */
-	edev = of_node_to_eeh_dev(dn);
-	config_addr = edev->config_addr;
-	if (edev->pe_config_addr)
-		config_addr = edev->pe_config_addr;
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
 
 	/* Use new configure-pe function, if supported */
 	if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
 		ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid));
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
 	} else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
 		ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid));
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
 	} else {
 		return -EFAULT;
 	}
 
 	if (ret)
-		pr_warning("%s: Unable to configure bridge %d for %s\n",
-			__func__, ret, dn->full_name);
+		pr_warning("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
+			__func__, pe->phb->global_number, pe->addr, ret);
 
 	return ret;
 }
@@ -542,6 +720,8 @@ static int pseries_eeh_write_config(struct device_node *dn, int where, int size,
 static struct eeh_ops pseries_eeh_ops = {
 	.name			= "pseries",
 	.init			= pseries_eeh_init,
+	.of_probe		= pseries_eeh_of_probe,
+	.dev_probe		= NULL,
 	.set_option		= pseries_eeh_set_option,
 	.get_pe_addr		= pseries_eeh_get_pe_addr,
 	.get_state		= pseries_eeh_get_state,
@@ -550,7 +730,9 @@ static struct eeh_ops pseries_eeh_ops = {
 	.get_log		= pseries_eeh_get_log,
 	.configure_bridge       = pseries_eeh_configure_bridge,
 	.read_config		= pseries_eeh_read_config,
-	.write_config		= pseries_eeh_write_config
+	.write_config		= pseries_eeh_write_config,
+	.next_error		= NULL,
+	.restore_config		= NULL
 };
 
 /**
@@ -559,7 +741,21 @@ static struct eeh_ops pseries_eeh_ops = {
  * EEH initialization on pseries platform. This function should be
  * called before any EEH related functions.
  */
-int __init eeh_pseries_init(void)
+static int __init eeh_pseries_init(void)
 {
-	return eeh_ops_register(&pseries_eeh_ops);
+	int ret = -EINVAL;
+
+	if (!machine_is(pseries))
+		return ret;
+
+	ret = eeh_ops_register(&pseries_eeh_ops);
+	if (!ret)
+		pr_info("EEH: pSeries platform initialized\n");
+	else
+		pr_info("EEH: pSeries platform initialization failure (%d)\n",
+			ret);
+
+	return ret;
 }
+
+early_initcall(eeh_pseries_init);