diff options
Diffstat (limited to 'arch/powerpc/platforms/powernv/eeh-ioda.c')
| -rw-r--r-- | arch/powerpc/platforms/powernv/eeh-ioda.c | 890 |
1 files changed, 890 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c new file mode 100644 index 00000000000..8ad0c5b891f --- /dev/null +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -0,0 +1,890 @@ +/* + * The file intends to implement the functions needed by EEH, which is + * built on IODA compliant chip. Actually, lots of functions related + * to EEH would be built based on the OPAL APIs. + * + * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/bootmem.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/msi.h> +#include <linux/notifier.h> +#include <linux/pci.h> +#include <linux/string.h> + +#include <asm/eeh.h> +#include <asm/eeh_event.h> +#include <asm/io.h> +#include <asm/iommu.h> +#include <asm/msi_bitmap.h> +#include <asm/opal.h> +#include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> +#include <asm/tce.h> + +#include "powernv.h" +#include "pci.h" + +static int ioda_eeh_nb_init = 0; + +static int ioda_eeh_event(struct notifier_block *nb, + unsigned long events, void *change) +{ + uint64_t changed_evts = (uint64_t)change; + + /* + * We simply send special EEH event if EEH has + * been enabled, or clear pending events in + * case that we enable EEH soon + */ + if (!(changed_evts & OPAL_EVENT_PCI_ERROR) || + !(events & OPAL_EVENT_PCI_ERROR)) + return 0; + + if (eeh_enabled()) + eeh_send_failure_event(NULL); + else + opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul); + + return 0; +} + +static struct notifier_block ioda_eeh_nb = { + .notifier_call = ioda_eeh_event, + .next = NULL, + .priority = 0 +}; + +#ifdef CONFIG_DEBUG_FS +static int ioda_eeh_dbgfs_set(void *data, int offset, u64 val) +{ + struct pci_controller *hose = data; + struct pnv_phb *phb = hose->private_data; + + out_be64(phb->regs + offset, val); + return 0; +} + +static int ioda_eeh_dbgfs_get(void *data, int offset, u64 *val) +{ + struct pci_controller *hose = data; + struct pnv_phb *phb = hose->private_data; + + *val = in_be64(phb->regs + offset); + return 0; +} + +static int ioda_eeh_outb_dbgfs_set(void *data, u64 val) +{ + return ioda_eeh_dbgfs_set(data, 0xD10, val); +} + +static int ioda_eeh_outb_dbgfs_get(void *data, u64 *val) +{ + return ioda_eeh_dbgfs_get(data, 0xD10, val); +} + +static int ioda_eeh_inbA_dbgfs_set(void *data, u64 val) +{ + return ioda_eeh_dbgfs_set(data, 0xD90, val); +} + +static int ioda_eeh_inbA_dbgfs_get(void *data, u64 *val) +{ + return ioda_eeh_dbgfs_get(data, 0xD90, val); +} + +static int ioda_eeh_inbB_dbgfs_set(void *data, u64 val) +{ + return ioda_eeh_dbgfs_set(data, 0xE10, val); +} + +static int ioda_eeh_inbB_dbgfs_get(void *data, u64 *val) +{ + return ioda_eeh_dbgfs_get(data, 0xE10, val); +} + +DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_outb_dbgfs_ops, ioda_eeh_outb_dbgfs_get, + ioda_eeh_outb_dbgfs_set, "0x%llx\n"); +DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbA_dbgfs_ops, ioda_eeh_inbA_dbgfs_get, + ioda_eeh_inbA_dbgfs_set, "0x%llx\n"); +DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get, + ioda_eeh_inbB_dbgfs_set, "0x%llx\n"); +#endif /* CONFIG_DEBUG_FS */ + + +/** + * ioda_eeh_post_init - Chip dependent post initialization + * @hose: PCI controller + * + * The function will be called after eeh PEs and devices + * have been built. That means the EEH is ready to supply + * service with I/O cache. + */ +static int ioda_eeh_post_init(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + int ret; + + /* Register OPAL event notifier */ + if (!ioda_eeh_nb_init) { + ret = opal_notifier_register(&ioda_eeh_nb); + if (ret) { + pr_err("%s: Can't register OPAL event notifier (%d)\n", + __func__, ret); + return ret; + } + + ioda_eeh_nb_init = 1; + } + +#ifdef CONFIG_DEBUG_FS + if (!phb->has_dbgfs && phb->dbgfs) { + phb->has_dbgfs = 1; + + debugfs_create_file("err_injct_outbound", 0600, + phb->dbgfs, hose, + &ioda_eeh_outb_dbgfs_ops); + debugfs_create_file("err_injct_inboundA", 0600, + phb->dbgfs, hose, + &ioda_eeh_inbA_dbgfs_ops); + debugfs_create_file("err_injct_inboundB", 0600, + phb->dbgfs, hose, + &ioda_eeh_inbB_dbgfs_ops); + } +#endif + + /* If EEH is enabled, we're going to rely on that. + * Otherwise, we restore to conventional mechanism + * to clear frozen PE during PCI config access. + */ + if (eeh_enabled()) + phb->flags |= PNV_PHB_FLAG_EEH; + else + phb->flags &= ~PNV_PHB_FLAG_EEH; + + return 0; +} + +/** + * ioda_eeh_set_option - Set EEH operation or I/O setting + * @pe: EEH PE + * @option: options + * + * Enable or disable EEH option for the indicated PE. The + * function also can be used to enable I/O or DMA for the + * PE. + */ +static int ioda_eeh_set_option(struct eeh_pe *pe, int option) +{ + s64 ret; + u32 pe_no; + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + + /* Check on PE number */ + if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) { + pr_err("%s: PE address %x out of range [0, %x] " + "on PHB#%x\n", + __func__, pe->addr, phb->ioda.total_pe, + hose->global_number); + return -EINVAL; + } + + pe_no = pe->addr; + switch (option) { + case EEH_OPT_DISABLE: + ret = -EEXIST; + break; + case EEH_OPT_ENABLE: + ret = 0; + break; + case EEH_OPT_THAW_MMIO: + ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, + OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO); + if (ret) { + pr_warning("%s: Failed to enable MMIO for " + "PHB#%x-PE#%x, err=%lld\n", + __func__, hose->global_number, pe_no, ret); + return -EIO; + } + + break; + case EEH_OPT_THAW_DMA: + ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, + OPAL_EEH_ACTION_CLEAR_FREEZE_DMA); + if (ret) { + pr_warning("%s: Failed to enable DMA for " + "PHB#%x-PE#%x, err=%lld\n", + __func__, hose->global_number, pe_no, ret); + return -EIO; + } + + break; + default: + pr_warning("%s: Invalid option %d\n", __func__, option); + return -EINVAL; + } + + return ret; +} + +static void ioda_eeh_phb_diag(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + long rc; + + rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob, + PNV_PCI_DIAG_BUF_SIZE); + if (rc != OPAL_SUCCESS) { + pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n", + __func__, hose->global_number, rc); + return; + } + + pnv_pci_dump_phb_diag_data(hose, phb->diag.blob); +} + +/** + * ioda_eeh_get_state - Retrieve the state of PE + * @pe: EEH PE + * + * The PE's state should be retrieved from the PEEV, PEST + * IODA tables. Since the OPAL has exported the function + * to do it, it'd better to use that. + */ +static int ioda_eeh_get_state(struct eeh_pe *pe) +{ + s64 ret = 0; + u8 fstate; + __be16 pcierr; + u32 pe_no; + int result; + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + + /* + * Sanity check on PE address. The PHB PE address should + * be zero. + */ + if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) { + pr_err("%s: PE address %x out of range [0, %x] " + "on PHB#%x\n", + __func__, pe->addr, phb->ioda.total_pe, + hose->global_number); + return EEH_STATE_NOT_SUPPORT; + } + + /* + * If we're in middle of PE reset, return normal + * state to keep EEH core going. For PHB reset, we + * still expect to have fenced PHB cleared with + * PHB reset. + */ + if (!(pe->type & EEH_PE_PHB) && + (pe->state & EEH_PE_RESET)) { + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); + return result; + } + + /* Retrieve PE status through OPAL */ + pe_no = pe->addr; + ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, + &fstate, &pcierr, NULL); + if (ret) { + pr_err("%s: Failed to get EEH status on " + "PHB#%x-PE#%x\n, err=%lld\n", + __func__, hose->global_number, pe_no, ret); + return EEH_STATE_NOT_SUPPORT; + } + + /* Check PHB status */ + if (pe->type & EEH_PE_PHB) { + result = 0; + result &= ~EEH_STATE_RESET_ACTIVE; + + if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) { + result |= EEH_STATE_MMIO_ACTIVE; + result |= EEH_STATE_DMA_ACTIVE; + result |= EEH_STATE_MMIO_ENABLED; + result |= EEH_STATE_DMA_ENABLED; + } else if (!(pe->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(hose); + } + + return result; + } + + /* Parse result out */ + result = 0; + switch (fstate) { + case OPAL_EEH_STOPPED_NOT_FROZEN: + result &= ~EEH_STATE_RESET_ACTIVE; + result |= EEH_STATE_MMIO_ACTIVE; + result |= EEH_STATE_DMA_ACTIVE; + result |= EEH_STATE_MMIO_ENABLED; + result |= EEH_STATE_DMA_ENABLED; + break; + case OPAL_EEH_STOPPED_MMIO_FREEZE: + result &= ~EEH_STATE_RESET_ACTIVE; + result |= EEH_STATE_DMA_ACTIVE; + result |= EEH_STATE_DMA_ENABLED; + break; + case OPAL_EEH_STOPPED_DMA_FREEZE: + result &= ~EEH_STATE_RESET_ACTIVE; + result |= EEH_STATE_MMIO_ACTIVE; + result |= EEH_STATE_MMIO_ENABLED; + break; + case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE: + result &= ~EEH_STATE_RESET_ACTIVE; + break; + case OPAL_EEH_STOPPED_RESET: + result |= EEH_STATE_RESET_ACTIVE; + break; + case OPAL_EEH_STOPPED_TEMP_UNAVAIL: + result |= EEH_STATE_UNAVAILABLE; + break; + case OPAL_EEH_STOPPED_PERM_UNAVAIL: + result |= EEH_STATE_NOT_SUPPORT; + break; + default: + pr_warning("%s: Unexpected EEH status 0x%x " + "on PHB#%x-PE#%x\n", + __func__, fstate, hose->global_number, pe_no); + } + + /* Dump PHB diag-data for frozen PE */ + if (result != EEH_STATE_NOT_SUPPORT && + (result & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) != + (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) && + !(pe->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(hose); + } + + return result; +} + +static s64 ioda_eeh_phb_poll(struct pnv_phb *phb) +{ + s64 rc = OPAL_HARDWARE; + + while (1) { + rc = opal_pci_poll(phb->opal_id); + if (rc <= 0) + break; + + if (system_state < SYSTEM_RUNNING) + udelay(1000 * rc); + else + msleep(rc); + } + + return rc; +} + +int ioda_eeh_phb_reset(struct pci_controller *hose, int option) +{ + struct pnv_phb *phb = hose->private_data; + s64 rc = OPAL_HARDWARE; + + pr_debug("%s: Reset PHB#%x, option=%d\n", + __func__, hose->global_number, option); + + /* Issue PHB complete reset request */ + if (option == EEH_RESET_FUNDAMENTAL || + option == EEH_RESET_HOT) + rc = opal_pci_reset(phb->opal_id, + OPAL_PHB_COMPLETE, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_DEACTIVATE) + rc = opal_pci_reset(phb->opal_id, + OPAL_PHB_COMPLETE, + OPAL_DEASSERT_RESET); + if (rc < 0) + goto out; + + /* + * Poll state of the PHB until the request is done + * successfully. The PHB reset is usually PHB complete + * reset followed by hot reset on root bus. So we also + * need the PCI bus settlement delay. + */ + rc = ioda_eeh_phb_poll(phb); + if (option == EEH_RESET_DEACTIVATE) { + if (system_state < SYSTEM_RUNNING) + udelay(1000 * EEH_PE_RST_SETTLE_TIME); + else + msleep(EEH_PE_RST_SETTLE_TIME); + } +out: + if (rc != OPAL_SUCCESS) + return -EIO; + + return 0; +} + +static int ioda_eeh_root_reset(struct pci_controller *hose, int option) +{ + struct pnv_phb *phb = hose->private_data; + s64 rc = OPAL_SUCCESS; + + pr_debug("%s: Reset PHB#%x, option=%d\n", + __func__, hose->global_number, option); + + /* + * During the reset deassert time, we needn't care + * the reset scope because the firmware does nothing + * for fundamental or hot reset during deassert phase. + */ + if (option == EEH_RESET_FUNDAMENTAL) + rc = opal_pci_reset(phb->opal_id, + OPAL_PCI_FUNDAMENTAL_RESET, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_HOT) + rc = opal_pci_reset(phb->opal_id, + OPAL_PCI_HOT_RESET, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_DEACTIVATE) + rc = opal_pci_reset(phb->opal_id, + OPAL_PCI_HOT_RESET, + OPAL_DEASSERT_RESET); + if (rc < 0) + goto out; + + /* Poll state of the PHB until the request is done */ + rc = ioda_eeh_phb_poll(phb); + if (option == EEH_RESET_DEACTIVATE) + msleep(EEH_PE_RST_SETTLE_TIME); +out: + if (rc != OPAL_SUCCESS) + return -EIO; + + return 0; +} + +static int ioda_eeh_bridge_reset(struct pci_dev *dev, int option) + +{ + struct device_node *dn = pci_device_to_OF_node(dev); + struct eeh_dev *edev = of_node_to_eeh_dev(dn); + int aer = edev ? edev->aer_cap : 0; + u32 ctrl; + + pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n", + __func__, pci_domain_nr(dev->bus), + dev->bus->number, option); + + switch (option) { + case EEH_RESET_FUNDAMENTAL: + case EEH_RESET_HOT: + /* Don't report linkDown event */ + if (aer) { + eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, &ctrl); + ctrl |= PCI_ERR_UNC_SURPDN; + eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, ctrl); + } + + eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl); + ctrl |= PCI_BRIDGE_CTL_BUS_RESET; + eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl); + msleep(EEH_PE_RST_HOLD_TIME); + + break; + case EEH_RESET_DEACTIVATE: + eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl); + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; + eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl); + msleep(EEH_PE_RST_SETTLE_TIME); + + /* Continue reporting linkDown event */ + if (aer) { + eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, &ctrl); + ctrl &= ~PCI_ERR_UNC_SURPDN; + eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, ctrl); + } + + break; + } + + return 0; +} + +void pnv_pci_reset_secondary_bus(struct pci_dev *dev) +{ + struct pci_controller *hose; + + if (pci_is_root_bus(dev->bus)) { + hose = pci_bus_to_host(dev->bus); + ioda_eeh_root_reset(hose, EEH_RESET_HOT); + ioda_eeh_root_reset(hose, EEH_RESET_DEACTIVATE); + } else { + ioda_eeh_bridge_reset(dev, EEH_RESET_HOT); + ioda_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE); + } +} + +/** + * ioda_eeh_reset - Reset the indicated PE + * @pe: EEH PE + * @option: reset option + * + * Do reset on the indicated PE. For PCI bus sensitive PE, + * we need to reset the parent p2p bridge. The PHB has to + * be reinitialized if the p2p bridge is root bridge. For + * PCI device sensitive PE, we will try to reset the device + * through FLR. For now, we don't have OPAL APIs to do HARD + * reset yet, so all reset would be SOFT (HOT) reset. + */ +static int ioda_eeh_reset(struct eeh_pe *pe, int option) +{ + struct pci_controller *hose = pe->phb; + struct pci_bus *bus; + int ret; + + /* + * For PHB reset, we always have complete reset. For those PEs whose + * primary bus derived from root complex (root bus) or root port + * (usually bus#1), we apply hot or fundamental reset on the root port. + * For other PEs, we always have hot reset on the PE primary bus. + * + * Here, we have different design to pHyp, which always clear the + * frozen state during PE reset. However, the good idea here from + * benh is to keep frozen state before we get PE reset done completely + * (until BAR restore). With the frozen state, HW drops illegal IO + * or MMIO access, which can incur recrusive frozen PE during PE + * reset. The side effect is that EEH core has to clear the frozen + * state explicitly after BAR restore. + */ + if (pe->type & EEH_PE_PHB) { + ret = ioda_eeh_phb_reset(hose, option); + } else { + bus = eeh_pe_bus_get(pe); + if (pci_is_root_bus(bus) || + pci_is_root_bus(bus->parent)) + ret = ioda_eeh_root_reset(hose, option); + else + ret = ioda_eeh_bridge_reset(bus->self, option); + } + + return ret; +} + +/** + * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE + * @pe: EEH PE + * + * For particular PE, it might have included PCI bridges. In order + * to make the PE work properly, those PCI bridges should be configured + * correctly. However, we need do nothing on P7IOC since the reset + * function will do everything that should be covered by the function. + */ +static int ioda_eeh_configure_bridge(struct eeh_pe *pe) +{ + return 0; +} + +static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data) +{ + /* GEM */ + pr_info(" GEM XFIR: %016llx\n", data->gemXfir); + pr_info(" GEM RFIR: %016llx\n", data->gemRfir); + pr_info(" GEM RIRQFIR: %016llx\n", data->gemRirqfir); + pr_info(" GEM Mask: %016llx\n", data->gemMask); + pr_info(" GEM RWOF: %016llx\n", data->gemRwof); + + /* LEM */ + pr_info(" LEM FIR: %016llx\n", data->lemFir); + pr_info(" LEM Error Mask: %016llx\n", data->lemErrMask); + pr_info(" LEM Action 0: %016llx\n", data->lemAction0); + pr_info(" LEM Action 1: %016llx\n", data->lemAction1); + pr_info(" LEM WOF: %016llx\n", data->lemWof); +} + +static void ioda_eeh_hub_diag(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + struct OpalIoP7IOCErrorData *data = &phb->diag.hub_diag; + long rc; + + rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data)); + if (rc != OPAL_SUCCESS) { + pr_warning("%s: Failed to get HUB#%llx diag-data (%ld)\n", + __func__, phb->hub_id, rc); + return; + } + + switch (data->type) { + case OPAL_P7IOC_DIAG_TYPE_RGC: + pr_info("P7IOC diag-data for RGC\n\n"); + ioda_eeh_hub_diag_common(data); + pr_info(" RGC Status: %016llx\n", data->rgc.rgcStatus); + pr_info(" RGC LDCP: %016llx\n", data->rgc.rgcLdcp); + break; + case OPAL_P7IOC_DIAG_TYPE_BI: + pr_info("P7IOC diag-data for BI %s\n\n", + data->bi.biDownbound ? "Downbound" : "Upbound"); + ioda_eeh_hub_diag_common(data); + pr_info(" BI LDCP 0: %016llx\n", data->bi.biLdcp0); + pr_info(" BI LDCP 1: %016llx\n", data->bi.biLdcp1); + pr_info(" BI LDCP 2: %016llx\n", data->bi.biLdcp2); + pr_info(" BI Fence Status: %016llx\n", data->bi.biFenceStatus); + break; + case OPAL_P7IOC_DIAG_TYPE_CI: + pr_info("P7IOC diag-data for CI Port %d\\nn", + data->ci.ciPort); + ioda_eeh_hub_diag_common(data); + pr_info(" CI Port Status: %016llx\n", data->ci.ciPortStatus); + pr_info(" CI Port LDCP: %016llx\n", data->ci.ciPortLdcp); + break; + case OPAL_P7IOC_DIAG_TYPE_MISC: + pr_info("P7IOC diag-data for MISC\n\n"); + ioda_eeh_hub_diag_common(data); + break; + case OPAL_P7IOC_DIAG_TYPE_I2C: + pr_info("P7IOC diag-data for I2C\n\n"); + ioda_eeh_hub_diag_common(data); + break; + default: + pr_warning("%s: Invalid type of HUB#%llx diag-data (%d)\n", + __func__, phb->hub_id, data->type); + } +} + +static int ioda_eeh_get_pe(struct pci_controller *hose, + u16 pe_no, struct eeh_pe **pe) +{ + struct eeh_pe *phb_pe, *dev_pe; + struct eeh_dev dev; + + /* Find the PHB PE */ + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe) + return -EEXIST; + + /* Find the PE according to PE# */ + memset(&dev, 0, sizeof(struct eeh_dev)); + dev.phb = hose; + dev.pe_config_addr = pe_no; + dev_pe = eeh_pe_get(&dev); + if (!dev_pe) return -EEXIST; + + *pe = dev_pe; + return 0; +} + +/** + * ioda_eeh_next_error - Retrieve next error for EEH core to handle + * @pe: The affected PE + * + * The function is expected to be called by EEH core while it gets + * special EEH event (without binding PE). The function calls to + * OPAL APIs for next error to handle. The informational error is + * handled internally by platform. However, the dead IOC, dead PHB, + * fenced PHB and frozen PE should be handled by EEH core eventually. + */ +static int ioda_eeh_next_error(struct eeh_pe **pe) +{ + struct pci_controller *hose; + struct pnv_phb *phb; + struct eeh_pe *phb_pe, *parent_pe; + __be64 frozen_pe_no; + __be16 err_type, severity; + int active_flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE); + long rc; + int state, ret = EEH_NEXT_ERR_NONE; + + /* + * While running here, it's safe to purge the event queue. + * And we should keep the cached OPAL notifier event sychronized + * between the kernel and firmware. + */ + eeh_remove_event(NULL, false); + opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul); + + list_for_each_entry(hose, &hose_list, list_node) { + /* + * If the subordinate PCI buses of the PHB has been + * removed or is exactly under error recovery, we + * needn't take care of it any more. + */ + phb = hose->private_data; + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED)) + continue; + + rc = opal_pci_next_error(phb->opal_id, + &frozen_pe_no, &err_type, &severity); + + /* If OPAL API returns error, we needn't proceed */ + if (rc != OPAL_SUCCESS) { + pr_devel("%s: Invalid return value on " + "PHB#%x (0x%lx) from opal_pci_next_error", + __func__, hose->global_number, rc); + continue; + } + + /* If the PHB doesn't have error, stop processing */ + if (be16_to_cpu(err_type) == OPAL_EEH_NO_ERROR || + be16_to_cpu(severity) == OPAL_EEH_SEV_NO_ERROR) { + pr_devel("%s: No error found on PHB#%x\n", + __func__, hose->global_number); + continue; + } + + /* + * Processing the error. We're expecting the error with + * highest priority reported upon multiple errors on the + * specific PHB. + */ + pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n", + __func__, be16_to_cpu(err_type), be16_to_cpu(severity), + be64_to_cpu(frozen_pe_no), hose->global_number); + switch (be16_to_cpu(err_type)) { + case OPAL_EEH_IOC_ERROR: + if (be16_to_cpu(severity) == OPAL_EEH_SEV_IOC_DEAD) { + pr_err("EEH: dead IOC detected\n"); + ret = EEH_NEXT_ERR_DEAD_IOC; + } else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) { + pr_info("EEH: IOC informative error " + "detected\n"); + ioda_eeh_hub_diag(hose); + ret = EEH_NEXT_ERR_NONE; + } + + break; + case OPAL_EEH_PHB_ERROR: + if (be16_to_cpu(severity) == OPAL_EEH_SEV_PHB_DEAD) { + *pe = phb_pe; + pr_err("EEH: dead PHB#%x detected, " + "location: %s\n", + hose->global_number, + eeh_pe_loc_get(phb_pe)); + ret = EEH_NEXT_ERR_DEAD_PHB; + } else if (be16_to_cpu(severity) == + OPAL_EEH_SEV_PHB_FENCED) { + *pe = phb_pe; + pr_err("EEH: Fenced PHB#%x detected, " + "location: %s\n", + hose->global_number, + eeh_pe_loc_get(phb_pe)); + ret = EEH_NEXT_ERR_FENCED_PHB; + } else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) { + pr_info("EEH: PHB#%x informative error " + "detected, location: %s\n", + hose->global_number, + eeh_pe_loc_get(phb_pe)); + ioda_eeh_phb_diag(hose); + ret = EEH_NEXT_ERR_NONE; + } + + break; + case OPAL_EEH_PE_ERROR: + /* + * If we can't find the corresponding PE, we + * just try to unfreeze. + */ + if (ioda_eeh_get_pe(hose, + be64_to_cpu(frozen_pe_no), pe)) { + /* Try best to clear it */ + pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n", + hose->global_number, frozen_pe_no); + pr_info("EEH: PHB location: %s\n", + eeh_pe_loc_get(phb_pe)); + opal_pci_eeh_freeze_clear(phb->opal_id, frozen_pe_no, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + ret = EEH_NEXT_ERR_NONE; + } else if ((*pe)->state & EEH_PE_ISOLATED) { + ret = EEH_NEXT_ERR_NONE; + } else { + pr_err("EEH: Frozen PE#%x on PHB#%x detected\n", + (*pe)->addr, (*pe)->phb->global_number); + pr_err("EEH: PE location: %s, PHB location: %s\n", + eeh_pe_loc_get(*pe), eeh_pe_loc_get(phb_pe)); + ret = EEH_NEXT_ERR_FROZEN_PE; + } + + break; + default: + pr_warn("%s: Unexpected error type %d\n", + __func__, be16_to_cpu(err_type)); + } + + /* + * EEH core will try recover from fenced PHB or + * frozen PE. In the time for frozen PE, EEH core + * enable IO path for that before collecting logs, + * but it ruins the site. So we have to dump the + * log in advance here. + */ + if ((ret == EEH_NEXT_ERR_FROZEN_PE || + ret == EEH_NEXT_ERR_FENCED_PHB) && + !((*pe)->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(*pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(hose); + } + + /* + * We probably have the frozen parent PE out there and + * we need have to handle frozen parent PE firstly. + */ + if (ret == EEH_NEXT_ERR_FROZEN_PE) { + parent_pe = (*pe)->parent; + while (parent_pe) { + /* Hit the ceiling ? */ + if (parent_pe->type & EEH_PE_PHB) + break; + + /* Frozen parent PE ? */ + state = ioda_eeh_get_state(parent_pe); + if (state > 0 && + (state & active_flags) != active_flags) + *pe = parent_pe; + + /* Next parent level */ + parent_pe = parent_pe->parent; + } + + /* We possibly migrate to another PE */ + eeh_pe_state_mark(*pe, EEH_PE_ISOLATED); + } + + /* + * If we have no errors on the specific PHB or only + * informative error there, we continue poking it. + * Otherwise, we need actions to be taken by upper + * layer. + */ + if (ret > EEH_NEXT_ERR_INF) + break; + } + + return ret; +} + +struct pnv_eeh_ops ioda_eeh_ops = { + .post_init = ioda_eeh_post_init, + .set_option = ioda_eeh_set_option, + .get_state = ioda_eeh_get_state, + .reset = ioda_eeh_reset, + .configure_bridge = ioda_eeh_configure_bridge, + .next_error = ioda_eeh_next_error +}; |