diff options
Diffstat (limited to 'arch/powerpc/platforms/embedded6xx')
17 files changed, 1603 insertions, 240 deletions
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 42908896781..a25f496c2ef 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -1,6 +1,6 @@ config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based boards" - depends on PPC32 && BROKEN_ON_SMP && PPC_MULTIPLATFORM + depends on 6xx && BROKEN_ON_SMP config LINKSTATION bool "Linkstation / Kurobox(HG) from Buffalo" @@ -9,7 +9,6 @@ config LINKSTATION select FSL_SOC select PPC_UDBG_16550 if SERIAL_8250 select DEFAULT_UIMAGE - select MPC10X_OPENPIC select MPC10X_BRIDGE help Select LINKSTATION if configuring for one of PPC- (MPC8241) @@ -24,7 +23,6 @@ config STORCENTER select MPIC select FSL_SOC select PPC_UDBG_16550 if SERIAL_8250 - select MPC10X_OPENPIC select MPC10X_BRIDGE help Select STORCENTER if configuring for the iomega StorCenter @@ -36,7 +34,6 @@ config MPC7448HPC2 select TSI108_BRIDGE select DEFAULT_UIMAGE select PPC_UDBG_16550 - select TSI108_BRIDGE help Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) platform @@ -46,18 +43,32 @@ config PPC_HOLLY depends on EMBEDDED6xx select TSI108_BRIDGE select PPC_UDBG_16550 - select TSI108_BRIDGE help Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval Board with TSI108/9 bridge (Hickory/Holly) -config PPC_PRPMC2800 - bool "Motorola-PrPMC2800" +config PPC_C2K + bool "SBS/GEFanuc C2K board" depends on EMBEDDED6xx select MV64X60 select NOT_COHERENT_CACHE + select MTD_CFI_I4 + help + This option enables support for the GE Fanuc C2K board (formerly + an SBS board). + +config MVME5100 + bool "Motorola/Emerson MVME5100" + depends on EMBEDDED6xx + select MPIC + select PCI + select PPC_INDIRECT_PCI + select PPC_I8259 + select PPC_NATIVE + select PPC_UDBG_16550 help - This option enables support for the Motorola PrPMC2800 board + This option enables support for the Motorola (now Emerson) MVME5100 + board. config TSI108_BRIDGE bool @@ -74,9 +85,34 @@ config MV64X60 select PPC_INDIRECT_PCI select CHECK_CACHE_COHERENCY -config MPC10X_OPENPIC +config GAMECUBE_COMMON bool -config MPC10X_STORE_GATHERING - bool "Enable MPC10x store gathering" - depends on MPC10X_BRIDGE +config USBGECKO_UDBG + bool "USB Gecko udbg console for the Nintendo GameCube/Wii" + depends on GAMECUBE_COMMON + help + If you say yes to this option, support will be included for the + USB Gecko adapter as an udbg console. + The USB Gecko is a EXI to USB Serial converter that can be plugged + into a memcard slot in the Nintendo GameCube/Wii. + + This driver bypasses the EXI layer completely. + + If in doubt, say N here. + +config GAMECUBE + bool "Nintendo-GameCube" + depends on EMBEDDED6xx + select GAMECUBE_COMMON + help + Select GAMECUBE if configuring for the Nintendo GameCube. + More information at: <http://gc-linux.sourceforge.net/> + +config WII + bool "Nintendo-Wii" + depends on EMBEDDED6xx + select GAMECUBE_COMMON + help + Select WII if configuring for the Nintendo Wii. + More information at: <http://gc-linux.sourceforge.net/> diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile index 06524d3ffd2..f126a2a0998 100644 --- a/arch/powerpc/platforms/embedded6xx/Makefile +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -5,4 +5,9 @@ obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o obj-$(CONFIG_STORCENTER) += storcenter.o obj-$(CONFIG_PPC_HOLLY) += holly.o -obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o +obj-$(CONFIG_PPC_C2K) += c2k.o +obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o +obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o +obj-$(CONFIG_GAMECUBE) += gamecube.o +obj-$(CONFIG_WII) += wii.o hlwd-pic.o +obj-$(CONFIG_MVME5100) += mvme5100.o diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/c2k.c index 653a5eb91c9..ebd3963fdf9 100644 --- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c +++ b/arch/powerpc/platforms/embedded6xx/c2k.c @@ -1,12 +1,16 @@ /* - * Board setup routines for the Motorola PrPMC2800 + * Board setup routines for the GEFanuc C2K board * - * Author: Dale Farnsworth <dale@farnsworth.org> + * Author: Remi Machet <rmachet@slac.stanford.edu> * - * 2007 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * Originated from prpmc2800.c + * + * 2008 (c) Stanford University + * 2007 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. */ #include <linux/stddef.h> @@ -14,12 +18,12 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/seq_file.h> +#include <linux/time.h> +#include <linux/of.h> #include <asm/machdep.h> #include <asm/prom.h> -#include <asm/system.h> #include <asm/time.h> -#include <asm/kexec.h> #include <mm/mmu_decl.h> @@ -32,14 +36,10 @@ #define MV64x60_GPP_LEVEL_CNTL 0x0010 #define MV64x60_GPP_VALUE_SET 0x0018 -#define PLATFORM_NAME_MAX 32 - -static char prpmc2800_platform_name[PLATFORM_NAME_MAX]; - static void __iomem *mv64x60_mpp_reg_base; static void __iomem *mv64x60_gpp_reg_base; -static void __init prpmc2800_setup_arch(void) +static void __init c2k_setup_arch(void) { struct device_node *np; phys_addr_t paddr; @@ -47,15 +47,15 @@ static void __init prpmc2800_setup_arch(void) /* * ioremap mpp and gpp registers in case they are later - * needed by prpmc2800_reset_board(). + * needed by c2k_reset_board(). */ - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp"); reg = of_get_property(np, "reg", NULL); paddr = of_translate_address(np, reg); of_node_put(np); mv64x60_mpp_reg_base = ioremap(paddr, reg[1]); - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp"); reg = of_get_property(np, "reg", NULL); paddr = of_translate_address(np, reg); of_node_put(np); @@ -64,11 +64,9 @@ static void __init prpmc2800_setup_arch(void) #ifdef CONFIG_PCI mv64x60_pci_init(); #endif - - printk("Motorola %s\n", prpmc2800_platform_name); } -static void prpmc2800_reset_board(void) +static void c2k_reset_board(void) { u32 temp; @@ -101,66 +99,50 @@ static void prpmc2800_reset_board(void) out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004); } -static void prpmc2800_restart(char *cmd) +static void c2k_restart(char *cmd) { - volatile ulong i = 10000000; - - prpmc2800_reset_board(); - - while (i-- > 0); + c2k_reset_board(); + msleep(100); panic("restart failed\n"); } #ifdef CONFIG_NOT_COHERENT_CACHE -#define PPRPM2800_COHERENCY_SETTING "off" +#define COHERENCY_SETTING "off" #else -#define PPRPM2800_COHERENCY_SETTING "on" +#define COHERENCY_SETTING "on" #endif -void prpmc2800_show_cpuinfo(struct seq_file *m) +void c2k_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; - - seq_printf(m, "Vendor\t\t: Motorola\n"); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING); + seq_printf(m, "Vendor\t\t: GEFanuc\n"); + seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING); } /* * Called very early, device-tree isn't unflattened */ -static int __init prpmc2800_probe(void) +static int __init c2k_probe(void) { unsigned long root = of_get_flat_dt_root(); - unsigned long len = PLATFORM_NAME_MAX; - void *m; - if (!of_flat_dt_is_compatible(root, "motorola,PrPMC2800")) + if (!of_flat_dt_is_compatible(root, "GEFanuc,C2K")) return 0; - /* Update ppc_md.name with name from dt */ - m = of_get_flat_dt_prop(root, "model", &len); - if (m) - strncpy(prpmc2800_platform_name, m, - min((int)len, PLATFORM_NAME_MAX - 1)); + printk(KERN_INFO "Detected a GEFanuc C2K board\n"); - _set_L2CR(_get_L2CR() | L2CR_L2E); + _set_L2CR(0); + _set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I); return 1; } -define_machine(prpmc2800){ - .name = prpmc2800_platform_name, - .probe = prpmc2800_probe, - .setup_arch = prpmc2800_setup_arch, +define_machine(c2k) { + .name = "C2K", + .probe = c2k_probe, + .setup_arch = c2k_setup_arch, .init_early = mv64x60_init_early, - .show_cpuinfo = prpmc2800_show_cpuinfo, + .show_cpuinfo = c2k_show_cpuinfo, .init_IRQ = mv64x60_init_irq, .get_irq = mv64x60_get_irq, - .restart = prpmc2800_restart, + .restart = c2k_restart, .calibrate_decr = generic_calibrate_decr, -#ifdef CONFIG_KEXEC - .machine_kexec = default_machine_kexec, - .machine_kexec_prepare = default_machine_kexec_prepare, - .machine_crash_shutdown = default_machine_crash_shutdown, -#endif }; diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c new file mode 100644 index 00000000000..4cde8e7da4b --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c @@ -0,0 +1,255 @@ +/* + * arch/powerpc/platforms/embedded6xx/flipper-pic.c + * + * Nintendo GameCube/Wii "Flipper" interrupt controller support. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "flipper-pic" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <asm/io.h> + +#include "flipper-pic.h" + +#define FLIPPER_NR_IRQS 32 + +/* + * Each interrupt has a corresponding bit in both + * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers. + * + * Enabling/disabling an interrupt line involves setting/clearing + * the corresponding bit in IMR. + * Except for the RSW interrupt, all interrupts get deasserted automatically + * when the source deasserts the interrupt. + */ +#define FLIPPER_ICR 0x00 +#define FLIPPER_ICR_RSS (1<<16) /* reset switch state */ + +#define FLIPPER_IMR 0x04 + +#define FLIPPER_RESET 0x24 + + +/* + * IRQ chip hooks. + * + */ + +static void flipper_pic_mask_and_ack(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + u32 mask = 1 << irq; + + clrbits32(io_base + FLIPPER_IMR, mask); + /* this is at least needed for RSW */ + out_be32(io_base + FLIPPER_ICR, mask); +} + +static void flipper_pic_ack(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + /* this is at least needed for RSW */ + out_be32(io_base + FLIPPER_ICR, 1 << irq); +} + +static void flipper_pic_mask(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + clrbits32(io_base + FLIPPER_IMR, 1 << irq); +} + +static void flipper_pic_unmask(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + setbits32(io_base + FLIPPER_IMR, 1 << irq); +} + + +static struct irq_chip flipper_pic = { + .name = "flipper-pic", + .irq_ack = flipper_pic_ack, + .irq_mask_ack = flipper_pic_mask_and_ack, + .irq_mask = flipper_pic_mask, + .irq_unmask = flipper_pic_unmask, +}; + +/* + * IRQ host hooks. + * + */ + +static struct irq_domain *flipper_irq_host; + +static int flipper_pic_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(virq, h->host_data); + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &flipper_pic, handle_level_irq); + return 0; +} + +static int flipper_pic_match(struct irq_domain *h, struct device_node *np) +{ + return 1; +} + + +static const struct irq_domain_ops flipper_irq_domain_ops = { + .map = flipper_pic_map, + .match = flipper_pic_match, +}; + +/* + * Platform hooks. + * + */ + +static void __flipper_quiesce(void __iomem *io_base) +{ + /* mask and ack all IRQs */ + out_be32(io_base + FLIPPER_IMR, 0x00000000); + out_be32(io_base + FLIPPER_ICR, 0xffffffff); +} + +struct irq_domain * __init flipper_pic_init(struct device_node *np) +{ + struct device_node *pi; + struct irq_domain *irq_domain = NULL; + struct resource res; + void __iomem *io_base; + int retval; + + pi = of_get_parent(np); + if (!pi) { + pr_err("no parent found\n"); + goto out; + } + if (!of_device_is_compatible(pi, "nintendo,flipper-pi")) { + pr_err("unexpected parent compatible\n"); + goto out; + } + + retval = of_address_to_resource(pi, 0, &res); + if (retval) { + pr_err("no io memory range found\n"); + goto out; + } + io_base = ioremap(res.start, resource_size(&res)); + + pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + + __flipper_quiesce(io_base); + + irq_domain = irq_domain_add_linear(np, FLIPPER_NR_IRQS, + &flipper_irq_domain_ops, io_base); + if (!irq_domain) { + pr_err("failed to allocate irq_domain\n"); + return NULL; + } + +out: + return irq_domain; +} + +unsigned int flipper_pic_get_irq(void) +{ + void __iomem *io_base = flipper_irq_host->host_data; + int irq; + u32 irq_status; + + irq_status = in_be32(io_base + FLIPPER_ICR) & + in_be32(io_base + FLIPPER_IMR); + if (irq_status == 0) + return NO_IRQ; /* no more IRQs pending */ + + irq = __ffs(irq_status); + return irq_linear_revmap(flipper_irq_host, irq); +} + +/* + * Probe function. + * + */ + +void __init flipper_pic_probe(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-pic"); + BUG_ON(!np); + + flipper_irq_host = flipper_pic_init(np); + BUG_ON(!flipper_irq_host); + + irq_set_default_host(flipper_irq_host); + + of_node_put(np); +} + +/* + * Misc functions related to the flipper chipset. + * + */ + +/** + * flipper_quiesce() - quiesce flipper irq controller + * + * Mask and ack all interrupt sources. + * + */ +void flipper_quiesce(void) +{ + void __iomem *io_base = flipper_irq_host->host_data; + + __flipper_quiesce(io_base); +} + +/* + * Resets the platform. + */ +void flipper_platform_reset(void) +{ + void __iomem *io_base; + + if (flipper_irq_host && flipper_irq_host->host_data) { + io_base = flipper_irq_host->host_data; + out_8(io_base + FLIPPER_RESET, 0x00); + } +} + +/* + * Returns non-zero if the reset button is pressed. + */ +int flipper_is_reset_button_pressed(void) +{ + void __iomem *io_base; + u32 icr; + + if (flipper_irq_host && flipper_irq_host->host_data) { + io_base = flipper_irq_host->host_data; + icr = in_be32(io_base + FLIPPER_ICR); + return !(icr & FLIPPER_ICR_RSS); + } + return 0; +} + diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.h b/arch/powerpc/platforms/embedded6xx/flipper-pic.h new file mode 100644 index 00000000000..e339186b566 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.h @@ -0,0 +1,25 @@ +/* + * arch/powerpc/platforms/embedded6xx/flipper-pic.h + * + * Nintendo GameCube/Wii "Flipper" interrupt controller support. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __FLIPPER_PIC_H +#define __FLIPPER_PIC_H + +unsigned int flipper_pic_get_irq(void); +void __init flipper_pic_probe(void); + +void flipper_quiesce(void); +void flipper_platform_reset(void); +int flipper_is_reset_button_pressed(void); + +#endif diff --git a/arch/powerpc/platforms/embedded6xx/gamecube.c b/arch/powerpc/platforms/embedded6xx/gamecube.c new file mode 100644 index 00000000000..a138e14bad2 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/gamecube.c @@ -0,0 +1,107 @@ +/* + * arch/powerpc/platforms/embedded6xx/gamecube.c + * + * Nintendo GameCube board-specific support + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/kexec.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/udbg.h> + +#include "flipper-pic.h" +#include "usbgecko_udbg.h" + + +static void gamecube_spin(void) +{ + /* spin until power button pressed */ + for (;;) + cpu_relax(); +} + +static void gamecube_restart(char *cmd) +{ + local_irq_disable(); + flipper_platform_reset(); + gamecube_spin(); +} + +static void gamecube_power_off(void) +{ + local_irq_disable(); + gamecube_spin(); +} + +static void gamecube_halt(void) +{ + gamecube_restart(NULL); +} + +static void __init gamecube_init_early(void) +{ + ug_udbg_init(); +} + +static int __init gamecube_probe(void) +{ + unsigned long dt_root; + + dt_root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(dt_root, "nintendo,gamecube")) + return 0; + + return 1; +} + +static void gamecube_shutdown(void) +{ + flipper_quiesce(); +} + +define_machine(gamecube) { + .name = "gamecube", + .probe = gamecube_probe, + .init_early = gamecube_init_early, + .restart = gamecube_restart, + .power_off = gamecube_power_off, + .halt = gamecube_halt, + .init_IRQ = flipper_pic_probe, + .get_irq = flipper_pic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .machine_shutdown = gamecube_shutdown, +}; + + +static struct of_device_id gamecube_of_bus[] = { + { .compatible = "nintendo,flipper", }, + { }, +}; + +static int __init gamecube_device_probe(void) +{ + if (!machine_is(gamecube)) + return 0; + + of_platform_bus_probe(NULL, gamecube_of_bus, NULL); + return 0; +} +device_initcall(gamecube_device_probe); + diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c new file mode 100644 index 00000000000..c269caee58f --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -0,0 +1,236 @@ +/* + * arch/powerpc/platforms/embedded6xx/hlwd-pic.c + * + * Nintendo Wii "Hollywood" interrupt controller support. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "hlwd-pic" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <asm/io.h> + +#include "hlwd-pic.h" + +#define HLWD_NR_IRQS 32 + +/* + * Each interrupt has a corresponding bit in both + * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers. + * + * Enabling/disabling an interrupt line involves asserting/clearing + * the corresponding bit in IMR. ACK'ing a request simply involves + * asserting the corresponding bit in ICR. + */ +#define HW_BROADWAY_ICR 0x00 +#define HW_BROADWAY_IMR 0x04 + + +/* + * IRQ chip hooks. + * + */ + +static void hlwd_pic_mask_and_ack(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + u32 mask = 1 << irq; + + clrbits32(io_base + HW_BROADWAY_IMR, mask); + out_be32(io_base + HW_BROADWAY_ICR, mask); +} + +static void hlwd_pic_ack(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + out_be32(io_base + HW_BROADWAY_ICR, 1 << irq); +} + +static void hlwd_pic_mask(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + clrbits32(io_base + HW_BROADWAY_IMR, 1 << irq); +} + +static void hlwd_pic_unmask(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + setbits32(io_base + HW_BROADWAY_IMR, 1 << irq); +} + + +static struct irq_chip hlwd_pic = { + .name = "hlwd-pic", + .irq_ack = hlwd_pic_ack, + .irq_mask_ack = hlwd_pic_mask_and_ack, + .irq_mask = hlwd_pic_mask, + .irq_unmask = hlwd_pic_unmask, +}; + +/* + * IRQ host hooks. + * + */ + +static struct irq_domain *hlwd_irq_host; + +static int hlwd_pic_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(virq, h->host_data); + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &hlwd_pic, handle_level_irq); + return 0; +} + +static const struct irq_domain_ops hlwd_irq_domain_ops = { + .map = hlwd_pic_map, +}; + +static unsigned int __hlwd_pic_get_irq(struct irq_domain *h) +{ + void __iomem *io_base = h->host_data; + int irq; + u32 irq_status; + + irq_status = in_be32(io_base + HW_BROADWAY_ICR) & + in_be32(io_base + HW_BROADWAY_IMR); + if (irq_status == 0) + return NO_IRQ; /* no more IRQs pending */ + + irq = __ffs(irq_status); + return irq_linear_revmap(h, irq); +} + +static void hlwd_pic_irq_cascade(unsigned int cascade_virq, + struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct irq_domain *irq_domain = irq_get_handler_data(cascade_virq); + unsigned int virq; + + raw_spin_lock(&desc->lock); + chip->irq_mask(&desc->irq_data); /* IRQ_LEVEL */ + raw_spin_unlock(&desc->lock); + + virq = __hlwd_pic_get_irq(irq_domain); + if (virq != NO_IRQ) + generic_handle_irq(virq); + else + pr_err("spurious interrupt!\n"); + + raw_spin_lock(&desc->lock); + chip->irq_ack(&desc->irq_data); /* IRQ_LEVEL */ + if (!irqd_irq_disabled(&desc->irq_data) && chip->irq_unmask) + chip->irq_unmask(&desc->irq_data); + raw_spin_unlock(&desc->lock); +} + +/* + * Platform hooks. + * + */ + +static void __hlwd_quiesce(void __iomem *io_base) +{ + /* mask and ack all IRQs */ + out_be32(io_base + HW_BROADWAY_IMR, 0); + out_be32(io_base + HW_BROADWAY_ICR, 0xffffffff); +} + +struct irq_domain *hlwd_pic_init(struct device_node *np) +{ + struct irq_domain *irq_domain; + struct resource res; + void __iomem *io_base; + int retval; + + retval = of_address_to_resource(np, 0, &res); + if (retval) { + pr_err("no io memory range found\n"); + return NULL; + } + io_base = ioremap(res.start, resource_size(&res)); + if (!io_base) { + pr_err("ioremap failed\n"); + return NULL; + } + + pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + + __hlwd_quiesce(io_base); + + irq_domain = irq_domain_add_linear(np, HLWD_NR_IRQS, + &hlwd_irq_domain_ops, io_base); + if (!irq_domain) { + pr_err("failed to allocate irq_domain\n"); + iounmap(io_base); + return NULL; + } + + return irq_domain; +} + +unsigned int hlwd_pic_get_irq(void) +{ + return __hlwd_pic_get_irq(hlwd_irq_host); +} + +/* + * Probe function. + * + */ + +void hlwd_pic_probe(void) +{ + struct irq_domain *host; + struct device_node *np; + const u32 *interrupts; + int cascade_virq; + + for_each_compatible_node(np, NULL, "nintendo,hollywood-pic") { + interrupts = of_get_property(np, "interrupts", NULL); + if (interrupts) { + host = hlwd_pic_init(np); + BUG_ON(!host); + cascade_virq = irq_of_parse_and_map(np, 0); + irq_set_handler_data(cascade_virq, host); + irq_set_chained_handler(cascade_virq, + hlwd_pic_irq_cascade); + hlwd_irq_host = host; + break; + } + } +} + +/** + * hlwd_quiesce() - quiesce hollywood irq controller + * + * Mask and ack all interrupt sources. + * + */ +void hlwd_quiesce(void) +{ + void __iomem *io_base = hlwd_irq_host->host_data; + + __hlwd_quiesce(io_base); +} + diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.h b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h new file mode 100644 index 00000000000..d2e5a092761 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h @@ -0,0 +1,22 @@ +/* + * arch/powerpc/platforms/embedded6xx/hlwd-pic.h + * + * Nintendo Wii "Hollywood" interrupt controller support. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __HLWD_PIC_H +#define __HLWD_PIC_H + +extern unsigned int hlwd_pic_get_irq(void); +extern void hlwd_pic_probe(void); +extern void hlwd_quiesce(void); + +#endif diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c index b21fde589ca..8c305c7c897 100644 --- a/arch/powerpc/platforms/embedded6xx/holly.c +++ b/arch/powerpc/platforms/embedded6xx/holly.c @@ -26,8 +26,8 @@ #include <linux/tty.h> #include <linux/serial_core.h> #include <linux/of_platform.h> +#include <linux/module.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/prom.h> @@ -147,38 +147,20 @@ static void __init holly_setup_arch(void) static void __init holly_init_IRQ(void) { struct mpic *mpic; - phys_addr_t mpic_paddr = 0; - struct device_node *tsi_pic; #ifdef CONFIG_PCI unsigned int cascade_pci_irq; struct device_node *tsi_pci; struct device_node *cascade_node = NULL; #endif - tsi_pic = of_find_node_by_type(NULL, "open-pic"); - if (tsi_pic) { - unsigned int size; - const void *prop = of_get_property(tsi_pic, "reg", &size); - mpic_paddr = of_translate_address(tsi_pic, prop); - } - - if (mpic_paddr == 0) { - printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__); - return; - } - - pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr); - - mpic = mpic_alloc(tsi_pic, mpic_paddr, - MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, - 24, - NR_IRQS-4, /* num_sources used */ + 24, 0, "Tsi108_PIC"); BUG_ON(mpic == NULL); - mpic_assign_isu(mpic, 0, mpic_paddr + 0x100); + mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); mpic_init(mpic); @@ -198,12 +180,11 @@ static void __init holly_init_IRQ(void) cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq); tsi108_pci_int_init(cascade_node); - set_irq_data(cascade_pci_irq, mpic); - set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); + irq_set_handler_data(cascade_pci_irq, mpic); + irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade); #endif /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); - of_node_put(tsi_pic); } void holly_show_cpuinfo(struct seq_file *m) diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index eb5d74e26fe..455e7c08742 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -12,7 +12,7 @@ #include <linux/kernel.h> #include <linux/initrd.h> -#include <linux/mtd/physmap.h> +#include <linux/of_platform.h> #include <asm/time.h> #include <asm/prom.h> @@ -21,39 +21,19 @@ #include "mpc10x.h" -static struct mtd_partition linkstation_physmap_partitions[] = { - { - .name = "mtd_firmimg", - .offset = 0x000000, - .size = 0x300000, - }, - { - .name = "mtd_bootcode", - .offset = 0x300000, - .size = 0x070000, - }, - { - .name = "mtd_status", - .offset = 0x370000, - .size = 0x010000, - }, - { - .name = "mtd_conf", - .offset = 0x380000, - .size = 0x080000, - }, - { - .name = "mtd_allflash", - .offset = 0x000000, - .size = 0x400000, - }, - { - .name = "mtd_data", - .offset = 0x310000, - .size = 0x0f0000, - }, +static __initdata struct of_device_id of_bus_ids[] = { + { .type = "soc", }, + { .compatible = "simple-bus", }, + {}, }; +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(linkstation, declare_of_platform_devices); + static int __init linkstation_add_bridge(struct device_node *dev) { #ifdef CONFIG_PCI @@ -85,10 +65,6 @@ static int __init linkstation_add_bridge(struct device_node *dev) static void __init linkstation_setup_arch(void) { struct device_node *np; -#ifdef CONFIG_MTD_PHYSMAP - physmap_set_partitions(linkstation_physmap_partitions, - ARRAY_SIZE(linkstation_physmap_partitions)); -#endif /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") @@ -105,29 +81,18 @@ static void __init linkstation_setup_arch(void) static void __init linkstation_init_IRQ(void) { struct mpic *mpic; - struct device_node *dnp; - const u32 *prop; - int size; - phys_addr_t paddr; - - dnp = of_find_node_by_type(NULL, "open-pic"); - if (dnp == NULL) - return; - - prop = of_get_property(dnp, "reg", &size); - paddr = (phys_addr_t)of_translate_address(dnp, prop); - mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC "); + mpic = mpic_alloc(NULL, 0, 0, 4, 0, " EPIC "); BUG_ON(mpic == NULL); /* PCI IRQs */ - mpic_assign_isu(mpic, 0, paddr + 0x10200); + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200); /* I2C */ - mpic_assign_isu(mpic, 1, paddr + 0x11000); + mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000); /* ttyS0, ttyS1 */ - mpic_assign_isu(mpic, 2, paddr + 0x11100); + mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100); mpic_init(mpic); } diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h index b30a6a3b5bd..b290b63661f 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc10x.h +++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h @@ -81,17 +81,6 @@ #define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \ MPC10X_MAPB_PCI_MEM_START) -/* Set hose members to values appropriate for the mem map used */ -#define MPC10X_SETUP_HOSE(hose, map) { \ - (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \ - (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \ - (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \ - (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \ - (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \ - (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \ -} - - /* Miscellaneous Configuration register offsets */ #define MPC10X_CFG_PIR_REG 0x09 #define MPC10X_CFG_PIR_HOST_BRIDGE 0x00 diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d4f8bf581e3..beeaf4a173e 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -23,6 +23,7 @@ #include <linux/pci.h> #include <linux/kdev_t.h> #include <linux/console.h> +#include <linux/module.h> #include <linux/delay.h> #include <linux/irq.h> #include <linux/seq_file.h> @@ -31,7 +32,6 @@ #include <linux/tty.h> #include <linux/serial_core.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/prom.h> @@ -101,70 +101,49 @@ static void __init mpc7448_hpc2_setup_arch(void) static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; - phys_addr_t mpic_paddr = 0; - struct device_node *tsi_pic; #ifdef CONFIG_PCI unsigned int cascade_pci_irq; struct device_node *tsi_pci; struct device_node *cascade_node = NULL; #endif - tsi_pic = of_find_node_by_type(NULL, "open-pic"); - if (tsi_pic) { - unsigned int size; - const void *prop = of_get_property(tsi_pic, "reg", &size); - mpic_paddr = of_translate_address(tsi_pic, prop); - } - - if (mpic_paddr == 0) { - printk("%s: No tsi108 PIC found !\n", __FUNCTION__); - return; - } - - DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__, - (u32) mpic_paddr); - - mpic = mpic_alloc(tsi_pic, mpic_paddr, - MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, - 24, - NR_IRQS-4, /* num_sources used */ + 24, 0, "Tsi108_PIC"); BUG_ON(mpic == NULL); - mpic_assign_isu(mpic, 0, mpic_paddr + 0x100); + mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); mpic_init(mpic); #ifdef CONFIG_PCI tsi_pci = of_find_node_by_type(NULL, "pci"); if (tsi_pci == NULL) { - printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + printk("%s: No tsi108 pci node found !\n", __func__); return; } cascade_node = of_find_node_by_type(NULL, "pic-router"); if (cascade_node == NULL) { - printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__); + printk("%s: No tsi108 pci cascade node found !\n", __func__); return; } cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); - DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__, + DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq); tsi108_pci_int_init(cascade_node); - set_irq_data(cascade_pci_irq, mpic); - set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); + irq_set_handler_data(cascade_pci_irq, mpic); + irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade); #endif /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); - of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) { seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "machine\t\t: MPC7448hpc2\n"); } void mpc7448_hpc2_restart(char *cmd) diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c new file mode 100644 index 00000000000..25e3bfb64ef --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c @@ -0,0 +1,221 @@ +/* + * Board setup routines for the Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * Based on earlier code by: + * + * Matt Porter, MontaVista Software Inc. + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Author: Stephen Chivers <schivers@csc.com> + * + */ + +#include <linux/of_platform.h> + +#include <asm/i8259.h> +#include <asm/pci-bridge.h> +#include <asm/mpic.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#define HAWK_MPIC_SIZE 0x00040000U +#define MVME5100_PCI_MEM_OFFSET 0x00000000 + +/* Board register addresses. */ +#define BOARD_STATUS_REG 0xfef88080 +#define BOARD_MODFAIL_REG 0xfef88090 +#define BOARD_MODRST_REG 0xfef880a0 +#define BOARD_TBEN_REG 0xfef880c0 +#define BOARD_SW_READ_REG 0xfef880e0 +#define BOARD_GEO_ADDR_REG 0xfef880e8 +#define BOARD_EXT_FEATURE1_REG 0xfef880f0 +#define BOARD_EXT_FEATURE2_REG 0xfef88100 + +static phys_addr_t pci_membase; +static u_char *restart; + +static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +static void __init mvme5100_pic_init(void) +{ + struct mpic *mpic; + struct device_node *np; + struct device_node *cp = NULL; + unsigned int cirq; + unsigned long intack = 0; + const u32 *prop = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) { + pr_err("Could not find open-pic node\n"); + return; + } + + mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, pci_membase + 0x10000); + + mpic_init(mpic); + + cp = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (cp == NULL) { + pr_warn("mvme5100_pic_init: couldn't find i8259\n"); + return; + } + + cirq = irq_of_parse_and_map(cp, 0); + if (cirq == NO_IRQ) { + pr_warn("mvme5100_pic_init: no cascade interrupt?\n"); + return; + } + + np = of_find_compatible_node(NULL, "pci", "mpc10x-pci"); + if (np) { + prop = of_get_property(np, "8259-interrupt-acknowledge", NULL); + + if (prop) + intack = prop[0]; + + of_node_put(np); + } + + if (intack) + pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n", + intack); + + i8259_init(cp, intack); + of_node_put(cp); + irq_set_chained_handler(cirq, mvme5100_8259_cascade); +} + +static int __init mvme5100_add_bridge(struct device_node *dev) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + unsigned short devid; + + pr_info("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = of_get_property(dev, "bus-range", &len); + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0); + + pci_process_bridge_OF_ranges(hose, dev, 1); + + early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid); + + if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) { + pr_err("HAWK PHB not present?\n"); + return 0; + } + + early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase); + + if (pci_membase == 0) { + pr_err("HAWK PHB mibar not correctly set?\n"); + return 0; + } + + pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase); + + return 0; +} + +static struct of_device_id mvme5100_of_bus_ids[] __initdata = { + { .compatible = "hawk-bridge", }, + {}, +}; + +/* + * Setup the architecture + */ +static void __init mvme5100_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mvme5100_setup_arch()", 0); + + for_each_compatible_node(np, "pci", "hawk-pci") + mvme5100_add_bridge(np); + + restart = ioremap(BOARD_MODRST_REG, 4); +} + + +static void mvme5100_show_cpuinfo(struct seq_file *m) +{ + seq_puts(m, "Vendor\t\t: Motorola/Emerson\n"); + seq_puts(m, "Machine\t\t: MVME5100\n"); +} + +static void mvme5100_restart(char *cmd) +{ + + local_irq_disable(); + mtmsr(mfmsr() | MSR_IP); + + out_8((u_char *) restart, 0x01); + + while (1) + ; +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mvme5100_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MVME5100"); +} + +static int __init probe_of_platform_devices(void) +{ + + of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL); + return 0; +} + +machine_device_initcall(mvme5100, probe_of_platform_devices); + +define_machine(mvme5100) { + .name = "MVME5100", + .probe = mvme5100_probe, + .setup_arch = mvme5100_setup_arch, + .init_IRQ = mvme5100_pic_init, + .show_cpuinfo = mvme5100_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = mvme5100_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c index 8864e488498..c458b60d14c 100644 --- a/arch/powerpc/platforms/embedded6xx/storcenter.c +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -14,10 +14,8 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/initrd.h> -#include <linux/mtd/physmap.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/prom.h> #include <asm/mpic.h> @@ -26,32 +24,6 @@ #include "mpc10x.h" -#ifdef CONFIG_MTD_PHYSMAP -static struct mtd_partition storcenter_physmap_partitions[] = { - { - .name = "kernel", - .offset = 0x000000, - .size = 0x170000, - }, - { - .name = "rootfs", - .offset = 0x170000, - .size = 0x590000, - }, - { - .name = "uboot", - .offset = 0x700000, - .size = 0x040000, - }, - { - .name = "config", - .offset = 0x740000, - .size = 0x0c0000, - }, -}; -#endif - - static __initdata struct of_device_id storcenter_of_bus[] = { { .name = "soc", }, {}, @@ -96,11 +68,6 @@ static void __init storcenter_setup_arch(void) { struct device_node *np; -#ifdef CONFIG_MTD_PHYSMAP - physmap_set_partitions(storcenter_physmap_partitions, - ARRAY_SIZE(storcenter_physmap_partitions)); -#endif - /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") storcenter_add_bridge(np); @@ -109,41 +76,22 @@ static void __init storcenter_setup_arch(void) } /* - * Interrupt setup and service. Interrrupts on the turbostation come + * Interrupt setup and service. Interrupts on the turbostation come * from the four PCI slots plus onboard 8241 devices: I2C, DUART. */ static void __init storcenter_init_IRQ(void) { struct mpic *mpic; - struct device_node *dnp; - const void *prop; - int size; - phys_addr_t paddr; - - dnp = of_find_node_by_type(NULL, "open-pic"); - if (dnp == NULL) - return; - - prop = of_get_property(dnp, "reg", &size); - if (prop == NULL) { - of_node_put(dnp); - return; - } - - paddr = (phys_addr_t)of_translate_address(dnp, prop); - mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, - 16, 32, " OpenPIC "); - - of_node_put(dnp); + mpic = mpic_alloc(NULL, 0, 0, 16, 0, " OpenPIC "); BUG_ON(mpic == NULL); /* * 16 Serial Interrupts followed by 16 Internal Interrupts. * I2C is the second internal, so it is at 17, 0x11020. */ - mpic_assign_isu(mpic, 0, paddr + 0x10200); - mpic_assign_isu(mpic, 1, paddr + 0x11000); + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200); + mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000); mpic_init(mpic); } diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c new file mode 100644 index 00000000000..20a8ed91962 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c @@ -0,0 +1,328 @@ +/* + * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c + * + * udbg serial input/output routines for the USB Gecko adapter. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <mm/mmu_decl.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/fixmap.h> + +#include "usbgecko_udbg.h" + + +#define EXI_CLK_32MHZ 5 + +#define EXI_CSR 0x00 +#define EXI_CSR_CLKMASK (0x7<<4) +#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4) +#define EXI_CSR_CSMASK (0x7<<7) +#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */ + +#define EXI_CR 0x0c +#define EXI_CR_TSTART (1<<0) +#define EXI_CR_WRITE (1<<2) +#define EXI_CR_READ_WRITE (2<<2) +#define EXI_CR_TLEN(len) (((len)-1)<<4) + +#define EXI_DATA 0x10 + +#define UG_READ_ATTEMPTS 100 +#define UG_WRITE_ATTEMPTS 100 + + +static void __iomem *ug_io_base; + +/* + * Performs one input/output transaction between the exi host and the usbgecko. + */ +static u32 ug_io_transaction(u32 in) +{ + u32 __iomem *csr_reg = ug_io_base + EXI_CSR; + u32 __iomem *data_reg = ug_io_base + EXI_DATA; + u32 __iomem *cr_reg = ug_io_base + EXI_CR; + u32 csr, data, cr; + + /* select */ + csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0; + out_be32(csr_reg, csr); + + /* read/write */ + data = in; + out_be32(data_reg, data); + cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART; + out_be32(cr_reg, cr); + + while (in_be32(cr_reg) & EXI_CR_TSTART) + barrier(); + + /* deselect */ + out_be32(csr_reg, 0); + + /* result */ + data = in_be32(data_reg); + + return data; +} + +/* + * Returns true if an usbgecko adapter is found. + */ +static int ug_is_adapter_present(void) +{ + if (!ug_io_base) + return 0; + + return ug_io_transaction(0x90000000) == 0x04700000; +} + +/* + * Returns true if the TX fifo is ready for transmission. + */ +static int ug_is_txfifo_ready(void) +{ + return ug_io_transaction(0xc0000000) & 0x04000000; +} + +/* + * Tries to transmit a character. + * If the TX fifo is not ready the result is undefined. + */ +static void ug_raw_putc(char ch) +{ + ug_io_transaction(0xb0000000 | (ch << 20)); +} + +/* + * Transmits a character. + * It silently fails if the TX fifo is not ready after a number of retries. + */ +static void ug_putc(char ch) +{ + int count = UG_WRITE_ATTEMPTS; + + if (!ug_io_base) + return; + + if (ch == '\n') + ug_putc('\r'); + + while (!ug_is_txfifo_ready() && count--) + barrier(); + if (count >= 0) + ug_raw_putc(ch); +} + +/* + * Returns true if the RX fifo is ready for transmission. + */ +static int ug_is_rxfifo_ready(void) +{ + return ug_io_transaction(0xd0000000) & 0x04000000; +} + +/* + * Tries to receive a character. + * If a character is unavailable the function returns -1. + */ +static int ug_raw_getc(void) +{ + u32 data = ug_io_transaction(0xa0000000); + if (data & 0x08000000) + return (data >> 16) & 0xff; + else + return -1; +} + +/* + * Receives a character. + * It fails if the RX fifo is not ready after a number of retries. + */ +static int ug_getc(void) +{ + int count = UG_READ_ATTEMPTS; + + if (!ug_io_base) + return -1; + + while (!ug_is_rxfifo_ready() && count--) + barrier(); + return ug_raw_getc(); +} + +/* + * udbg functions. + * + */ + +/* + * Transmits a character. + */ +void ug_udbg_putc(char ch) +{ + ug_putc(ch); +} + +/* + * Receives a character. Waits until a character is available. + */ +static int ug_udbg_getc(void) +{ + int ch; + + while ((ch = ug_getc()) == -1) + barrier(); + return ch; +} + +/* + * Receives a character. If a character is not available, returns -1. + */ +static int ug_udbg_getc_poll(void) +{ + if (!ug_is_rxfifo_ready()) + return -1; + return ug_getc(); +} + +/* + * Retrieves and prepares the virtual address needed to access the hardware. + */ +static void __iomem *ug_udbg_setup_exi_io_base(struct device_node *np) +{ + void __iomem *exi_io_base = NULL; + phys_addr_t paddr; + const unsigned int *reg; + + reg = of_get_property(np, "reg", NULL); + if (reg) { + paddr = of_translate_address(np, reg); + if (paddr) + exi_io_base = ioremap(paddr, reg[1]); + } + return exi_io_base; +} + +/* + * Checks if a USB Gecko adapter is inserted in any memory card slot. + */ +static void __iomem *ug_udbg_probe(void __iomem *exi_io_base) +{ + int i; + + /* look for a usbgecko on memcard slots A and B */ + for (i = 0; i < 2; i++) { + ug_io_base = exi_io_base + 0x14 * i; + if (ug_is_adapter_present()) + break; + } + if (i == 2) + ug_io_base = NULL; + return ug_io_base; + +} + +/* + * USB Gecko udbg support initialization. + */ +void __init ug_udbg_init(void) +{ + struct device_node *np; + void __iomem *exi_io_base; + + if (ug_io_base) + udbg_printf("%s: early -> final\n", __func__); + + np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-exi"); + if (!np) { + udbg_printf("%s: EXI node not found\n", __func__); + goto done; + } + + exi_io_base = ug_udbg_setup_exi_io_base(np); + if (!exi_io_base) { + udbg_printf("%s: failed to setup EXI io base\n", __func__); + goto done; + } + + if (!ug_udbg_probe(exi_io_base)) { + udbg_printf("usbgecko_udbg: not found\n"); + iounmap(exi_io_base); + } else { + udbg_putc = ug_udbg_putc; + udbg_getc = ug_udbg_getc; + udbg_getc_poll = ug_udbg_getc_poll; + udbg_printf("usbgecko_udbg: ready\n"); + } + +done: + if (np) + of_node_put(np); + return; +} + +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO + +static phys_addr_t __init ug_early_grab_io_addr(void) +{ +#if defined(CONFIG_GAMECUBE) + return 0x0c000000; +#elif defined(CONFIG_WII) + return 0x0d000000; +#else +#error Invalid platform for USB Gecko based early debugging. +#endif +} + +/* + * USB Gecko early debug support initialization for udbg. + */ +void __init udbg_init_usbgecko(void) +{ + void __iomem *early_debug_area; + void __iomem *exi_io_base; + + /* + * At this point we have a BAT already setup that enables I/O + * to the EXI hardware. + * + * The BAT uses a virtual address range reserved at the fixmap. + * This must match the virtual address configured in + * head_32.S:setup_usbgecko_bat(). + */ + early_debug_area = (void __iomem *)__fix_to_virt(FIX_EARLY_DEBUG_BASE); + exi_io_base = early_debug_area + 0x00006800; + + /* try to detect a USB Gecko */ + if (!ug_udbg_probe(exi_io_base)) + return; + + /* we found a USB Gecko, load udbg hooks */ + udbg_putc = ug_udbg_putc; + udbg_getc = ug_udbg_getc; + udbg_getc_poll = ug_udbg_getc_poll; + + /* + * Prepare again the same BAT for MMU_init. + * This allows udbg I/O to continue working after the MMU is + * turned on for real. + * It is safe to continue using the same virtual address as it is + * a reserved fixmap area. + */ + setbat(1, (unsigned long)early_debug_area, + ug_early_grab_io_addr(), 128*1024, PAGE_KERNEL_NCG); +} + +#endif /* CONFIG_PPC_EARLY_DEBUG_USBGECKO */ + diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h new file mode 100644 index 00000000000..bb6cde4ad76 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h @@ -0,0 +1,32 @@ +/* + * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h + * + * udbg serial input/output routines for the USB Gecko adapter. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __USBGECKO_UDBG_H +#define __USBGECKO_UDBG_H + +#ifdef CONFIG_USBGECKO_UDBG + +extern void __init ug_udbg_init(void); + +#else + +static inline void __init ug_udbg_init(void) +{ +} + +#endif /* CONFIG_USBGECKO_UDBG */ + +void __init udbg_init_usbgecko(void); + +#endif /* __USBGECKO_UDBG_H */ diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c new file mode 100644 index 00000000000..6d8dadf19f0 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/wii.c @@ -0,0 +1,252 @@ +/* + * arch/powerpc/platforms/embedded6xx/wii.c + * + * Nintendo Wii board-specific support + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "wii" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> +#include <linux/memblock.h> +#include <mm/mmu_decl.h> + +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/udbg.h> + +#include "flipper-pic.h" +#include "hlwd-pic.h" +#include "usbgecko_udbg.h" + +/* control block */ +#define HW_CTRL_COMPATIBLE "nintendo,hollywood-control" + +#define HW_CTRL_RESETS 0x94 +#define HW_CTRL_RESETS_SYS (1<<0) + +/* gpio */ +#define HW_GPIO_COMPATIBLE "nintendo,hollywood-gpio" + +#define HW_GPIO_BASE(idx) (idx * 0x20) +#define HW_GPIO_OUT(idx) (HW_GPIO_BASE(idx) + 0) +#define HW_GPIO_DIR(idx) (HW_GPIO_BASE(idx) + 4) + +#define HW_GPIO_SHUTDOWN (1<<1) +#define HW_GPIO_SLOT_LED (1<<5) +#define HW_GPIO_SENSOR_BAR (1<<8) + + +static void __iomem *hw_ctrl; +static void __iomem *hw_gpio; + +unsigned long wii_hole_start; +unsigned long wii_hole_size; + + +static int __init page_aligned(unsigned long x) +{ + return !(x & (PAGE_SIZE-1)); +} + +void __init wii_memory_fixups(void) +{ + struct memblock_region *p = memblock.memory.regions; + + /* + * This is part of a workaround to allow the use of two + * discontinuous RAM ranges on the Wii, even if this is + * currently unsupported on 32-bit PowerPC Linux. + * + * We coalesce the two memory ranges of the Wii into a + * single range, then create a reservation for the "hole" + * between both ranges. + */ + + BUG_ON(memblock.memory.cnt != 2); + BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base)); + + /* trim unaligned tail */ + memblock_remove(ALIGN(p[1].base + p[1].size, PAGE_SIZE), + (phys_addr_t)ULLONG_MAX); + + /* determine hole, add & reserve them */ + wii_hole_start = ALIGN(p[0].base + p[0].size, PAGE_SIZE); + wii_hole_size = p[1].base - wii_hole_start; + memblock_add(wii_hole_start, wii_hole_size); + memblock_reserve(wii_hole_start, wii_hole_size); + + BUG_ON(memblock.memory.cnt != 1); + __memblock_dump_all(); + + /* allow ioremapping the address space in the hole */ + __allow_ioremap_reserved = 1; +} + +unsigned long __init wii_mmu_mapin_mem2(unsigned long top) +{ + unsigned long delta, size, bl; + unsigned long max_size = (256<<20); + + /* MEM2 64MB@0x10000000 */ + delta = wii_hole_start + wii_hole_size; + size = top - delta; + for (bl = 128<<10; bl < max_size; bl <<= 1) { + if (bl * 2 > size) + break; + } + setbat(4, PAGE_OFFSET+delta, delta, bl, PAGE_KERNEL_X); + return delta + bl; +} + +static void wii_spin(void) +{ + local_irq_disable(); + for (;;) + cpu_relax(); +} + +static void __iomem *wii_ioremap_hw_regs(char *name, char *compatible) +{ + void __iomem *hw_regs = NULL; + struct device_node *np; + struct resource res; + int error = -ENODEV; + + np = of_find_compatible_node(NULL, NULL, compatible); + if (!np) { + pr_err("no compatible node found for %s\n", compatible); + goto out; + } + error = of_address_to_resource(np, 0, &res); + if (error) { + pr_err("no valid reg found for %s\n", np->name); + goto out_put; + } + + hw_regs = ioremap(res.start, resource_size(&res)); + if (hw_regs) { + pr_info("%s at 0x%08x mapped to 0x%p\n", name, + res.start, hw_regs); + } + +out_put: + of_node_put(np); +out: + return hw_regs; +} + +static void __init wii_setup_arch(void) +{ + hw_ctrl = wii_ioremap_hw_regs("hw_ctrl", HW_CTRL_COMPATIBLE); + hw_gpio = wii_ioremap_hw_regs("hw_gpio", HW_GPIO_COMPATIBLE); + if (hw_gpio) { + /* turn off the front blue led and IR light */ + clrbits32(hw_gpio + HW_GPIO_OUT(0), + HW_GPIO_SLOT_LED | HW_GPIO_SENSOR_BAR); + } +} + +static void wii_restart(char *cmd) +{ + local_irq_disable(); + + if (hw_ctrl) { + /* clear the system reset pin to cause a reset */ + clrbits32(hw_ctrl + HW_CTRL_RESETS, HW_CTRL_RESETS_SYS); + } + wii_spin(); +} + +static void wii_power_off(void) +{ + local_irq_disable(); + + if (hw_gpio) { + /* make sure that the poweroff GPIO is configured as output */ + setbits32(hw_gpio + HW_GPIO_DIR(1), HW_GPIO_SHUTDOWN); + + /* drive the poweroff GPIO high */ + setbits32(hw_gpio + HW_GPIO_OUT(1), HW_GPIO_SHUTDOWN); + } + wii_spin(); +} + +static void wii_halt(void) +{ + if (ppc_md.restart) + ppc_md.restart(NULL); + wii_spin(); +} + +static void __init wii_init_early(void) +{ + ug_udbg_init(); +} + +static void __init wii_pic_probe(void) +{ + flipper_pic_probe(); + hlwd_pic_probe(); +} + +static int __init wii_probe(void) +{ + unsigned long dt_root; + + dt_root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(dt_root, "nintendo,wii")) + return 0; + + return 1; +} + +static void wii_shutdown(void) +{ + hlwd_quiesce(); + flipper_quiesce(); +} + +define_machine(wii) { + .name = "wii", + .probe = wii_probe, + .init_early = wii_init_early, + .setup_arch = wii_setup_arch, + .restart = wii_restart, + .power_off = wii_power_off, + .halt = wii_halt, + .init_IRQ = wii_pic_probe, + .get_irq = flipper_pic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .machine_shutdown = wii_shutdown, +}; + +static struct of_device_id wii_of_bus[] = { + { .compatible = "nintendo,hollywood", }, + { }, +}; + +static int __init wii_device_probe(void) +{ + if (!machine_is(wii)) + return 0; + + of_platform_bus_probe(NULL, wii_of_bus, NULL); + return 0; +} +device_initcall(wii_device_probe); + |