diff options
Diffstat (limited to 'arch/powerpc/platforms/chrp/setup.c')
| -rw-r--r-- | arch/powerpc/platforms/chrp/setup.c | 155 |
1 files changed, 72 insertions, 83 deletions
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 373de4c063d..7044fd36197 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -15,16 +15,14 @@ #include <linux/stddef.h> #include <linux/unistd.h> #include <linux/ptrace.h> -#include <linux/slab.h> #include <linux/user.h> -#include <linux/a.out.h> #include <linux/tty.h> #include <linux/major.h> #include <linux/interrupt.h> #include <linux/reboot.h> #include <linux/init.h> #include <linux/pci.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/adb.h> #include <linux/module.h> #include <linux/delay.h> @@ -32,13 +30,11 @@ #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/initrd.h> -#include <linux/module.h> #include <linux/timer.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> -#include <asm/gg2.h> #include <asm/pci-bridge.h> #include <asm/dma.h> #include <asm/machdep.h> @@ -52,6 +48,7 @@ #include <asm/xmon.h> #include "chrp.h" +#include "gg2.h" void rtas_indicator_progress(char *, unsigned short); @@ -64,13 +61,6 @@ static struct mpic *chrp_mpic; DEFINE_PER_CPU(struct timer_list, heartbeat_timer); unsigned long event_scan_interval; -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include <linux/interrupt.h> (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *); - extern unsigned long loops_per_jiffy; /* To be replaced by RTAS when available */ @@ -116,7 +106,7 @@ void chrp_show_cpuinfo(struct seq_file *m) seq_printf(m, "machine\t\t: CHRP %s\n", model); /* longtrail (goldengate) stuff */ - if (!strncmp(model, "IBM,LongTrail", 13)) { + if (model && !strncmp(model, "IBM,LongTrail", 13)) { /* VLSI VAS96011/12 `Golden Gate 2' */ /* Memory banks */ sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) @@ -204,15 +194,20 @@ static void __init sio_fixup_irq(const char *name, u8 device, u8 level, static void __init sio_init(void) { struct device_node *root; + const char *model; - if ((root = of_find_node_by_path("/")) && - !strncmp(of_get_property(root, "model", NULL), - "IBM,LongTrail", 13)) { + root = of_find_node_by_path("/"); + if (!root) + return; + + model = of_get_property(root, "model", NULL); + if (model && !strncmp(model, "IBM,LongTrail", 13)) { /* logical device 0 (KBC/Keyboard) */ sio_fixup_irq("keyboard", 0, 1, 2); /* select logical device 1 (KBC/Mouse) */ sio_fixup_irq("mouse", 1, 12, 2); } + of_node_put(root); } @@ -252,6 +247,57 @@ static void briq_restart(char *cmd) for(;;); } +/* + * Per default, input/output-device points to the keyboard/screen + * If no card is installed, the built-in serial port is used as a fallback. + * But unfortunately, the firmware does not connect /chosen/{stdin,stdout} + * the the built-in serial node. Instead, a /failsafe node is created. + */ +static void chrp_init_early(void) +{ + struct device_node *node; + const char *property; + + if (strstr(cmd_line, "console=")) + return; + /* find the boot console from /chosen/stdout */ + if (!of_chosen) + return; + node = of_find_node_by_path("/"); + if (!node) + return; + property = of_get_property(node, "model", NULL); + if (!property) + goto out_put; + if (strcmp(property, "Pegasos2")) + goto out_put; + /* this is a Pegasos2 */ + property = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (!property) + goto out_put; + of_node_put(node); + node = of_find_node_by_path(property); + if (!node) + return; + property = of_get_property(node, "device_type", NULL); + if (!property) + goto out_put; + if (strcmp(property, "serial")) + goto out_put; + /* + * The 9pin connector is either /failsafe + * or /pci@80000000/isa@C/serial@i2F8 + * The optional graphics card has also type 'serial' in VGA mode. + */ + property = of_get_property(node, "name", NULL); + if (!property) + goto out_put; + if (!strcmp(property, "failsafe") || !strcmp(property, "serial")) + add_preferred_console("ttyS", 0, NULL); +out_put: + of_node_put(node); +} + void __init chrp_setup_arch(void) { struct device_node *root = of_find_node_by_path("/"); @@ -291,16 +337,6 @@ void __init chrp_setup_arch(void) ppc_md.set_rtc_time = rtas_set_rtc_time; } -#ifdef CONFIG_BLK_DEV_INITRD - /* this is fine for chrp */ - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - /* On pegasos, enable the L2 cache if not already done by OF */ pegasos_set_l2cr(); @@ -327,25 +363,15 @@ void __init chrp_setup_arch(void) if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); } -void -chrp_event_scan(unsigned long unused) -{ - unsigned char log[1024]; - int ret = 0; - - /* XXX: we should loop until the hardware says no more error logs -- Cort */ - rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, - __pa(log), 1024); - mod_timer(&__get_cpu_var(heartbeat_timer), - jiffies + event_scan_interval); -} - static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_desc_get_chip(desc); unsigned int cascade_irq = i8259_irq(); + if (cascade_irq != NO_IRQ) generic_handle_irq(cascade_irq); - desc->chip->eoi(irq); + + chip->irq_eoi(&desc->irq_data); } /* @@ -409,8 +435,8 @@ static void __init chrp_find_openpic(void) if (len > 1) isu_size = iranges[3]; - chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY, - isu_size, 0, " MPIC "); + chrp_mpic = mpic_alloc(np, opaddr, MPIC_NO_RESET, + isu_size, 0, " MPIC "); if (chrp_mpic == NULL) { printk(KERN_ERR "Failed to allocate MPIC structure\n"); goto bail; @@ -435,7 +461,6 @@ static void __init chrp_find_openpic(void) #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) static struct irqaction xmon_irqaction = { .handler = xmon_irq, - .mask = CPU_MASK_NONE, .name = "XMON break", }; #endif @@ -492,7 +517,7 @@ static void __init chrp_find_8259(void) if (cascade_irq == NO_IRQ) printk(KERN_ERR "i8259: failed to map cascade irq\n"); else - set_irq_chained_handler(cascade_irq, + irq_set_chained_handler(cascade_irq, chrp_8259_cascade); } } @@ -532,9 +557,6 @@ void __init chrp_init_IRQ(void) void __init chrp_init2(void) { - struct device_node *device; - const unsigned int *p = NULL; - #ifdef CONFIG_NVRAM chrp_nvram_init(); #endif @@ -546,48 +568,14 @@ chrp_init2(void) request_region(0x80,0x10,"dma page reg"); request_region(0xc0,0x20,"dma2"); - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - device = of_find_node_by_name(NULL, "rtas"); - if (device) - p = of_get_property(device, "rtas-event-scan-rate", NULL); - if (p && *p) { - /* - * Arrange to call chrp_event_scan at least *p times - * per minute. We use 59 rather than 60 here so that - * the rate will be slightly higher than the minimum. - * This all assumes we don't do hotplug CPU on any - * machine that needs the event scans done. - */ - unsigned long interval, offset; - int cpu, ncpus; - struct timer_list *timer; - - interval = HZ * 59 / *p; - offset = HZ; - ncpus = num_online_cpus(); - event_scan_interval = ncpus * interval; - for (cpu = 0; cpu < ncpus; ++cpu) { - timer = &per_cpu(heartbeat_timer, cpu); - setup_timer(timer, chrp_event_scan, 0); - timer->expires = jiffies + offset; - add_timer_on(timer, cpu); - offset += interval; - } - printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", - *p, interval); - } - of_node_put(device); - if (ppc_md.progress) ppc_md.progress(" Have fun! ", 0x7777); } static int __init chrp_probe(void) { - char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), - "device_type", NULL); + const char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), + "device_type", NULL); if (dtype == NULL) return 0; if (strcmp(dtype, "chrp")) @@ -605,6 +593,7 @@ define_machine(chrp) { .probe = chrp_probe, .setup_arch = chrp_setup_arch, .init = chrp_init2, + .init_early = chrp_init_early, .show_cpuinfo = chrp_show_cpuinfo, .init_IRQ = chrp_init_IRQ, .restart = rtas_restart, |