diff options
Diffstat (limited to 'arch/powerpc/platforms/8xx')
| -rw-r--r-- | arch/powerpc/platforms/8xx/Kconfig | 21 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/ep88xc.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/m8xx_setup.c | 26 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc86xads_setup.c | 7 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc885ads.h | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc885ads_setup.c | 6 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/tqm8xx_setup.c | 155 |
8 files changed, 194 insertions, 28 deletions
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 7fd224ca233..bd6f1a1cf92 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -18,7 +18,6 @@ config MPC8XXFADS config MPC86XADS bool "MPC86XADS" select CPM1 - select PPC_CPM_NEW_BINDING help MPC86x Application Development System by Freescale Semiconductor. The MPC86xADS is meant to serve as a platform for s/w and h/w @@ -27,7 +26,7 @@ config MPC86XADS config MPC885ADS bool "MPC885ADS" select CPM1 - select PPC_CPM_NEW_BINDING + select OF_DYNAMIC help Freescale Semiconductor MPC885 Application Development System (ADS). Also known as DUET. @@ -37,7 +36,6 @@ config MPC885ADS config PPC_EP88XC bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)" select CPM1 - select PPC_CPM_NEW_BINDING help This enables support for the Embedded Planet EP88xC board. @@ -47,12 +45,16 @@ config PPC_EP88XC config PPC_ADDER875 bool "Analogue & Micro Adder 875" select CPM1 - select PPC_CPM_NEW_BINDING - select REDBOOT help This enables support for the Analogue & Micro Adder 875 board. +config TQM8XX + bool "TQM8XX" + select CPM1 + help + support for the mpc8xx based boards from TQM. + endchoice menu "Freescale Ethernet driver platform-specific options" @@ -109,6 +111,15 @@ config 8xx_COPYBACK If in doubt, say Y here. +config 8xx_GPIO + bool "GPIO API Support" + select ARCH_REQUIRE_GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + config 8xx_CPU6 bool "CPU6 Silicon Errata (860 Pre Rev. C)" help diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile index 7b71d9c8fb4..76a81c3350a 100644 --- a/arch/powerpc/platforms/8xx/Makefile +++ b/arch/powerpc/platforms/8xx/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o obj-$(CONFIG_PPC_EP88XC) += ep88xc.o obj-$(CONFIG_PPC_ADDER875) += adder875.o +obj-$(CONFIG_TQM8XX) += tqm8xx_setup.o diff --git a/arch/powerpc/platforms/8xx/ep88xc.c b/arch/powerpc/platforms/8xx/ep88xc.c index 7d9ac6040d6..e62166681d0 100644 --- a/arch/powerpc/platforms/8xx/ep88xc.c +++ b/arch/powerpc/platforms/8xx/ep88xc.c @@ -10,6 +10,8 @@ */ #include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> #include <linux/of_platform.h> #include <asm/machdep.h> diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index 184f998d1be..587a2828b06 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -11,7 +11,6 @@ */ #include <linux/kernel.h> -#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/init.h> #include <linux/time.h> @@ -44,7 +43,7 @@ static irqreturn_t timebase_interrupt(int irq, void *dev) static struct irqaction tbint_irqaction = { .handler = timebase_interrupt, - .mask = CPU_MASK_NONE, + .flags = IRQF_NO_THREAD, .name = "tbint", }; @@ -111,17 +110,12 @@ void __init mpc8xx_calibrate_decr(void) /* Processor frequency is MHz. */ - ppc_tb_freq = 50000000; - if (!get_freq("bus-frequency", &ppc_tb_freq)) { - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - } - ppc_tb_freq /= 16; ppc_proc_freq = 50000000; if (!get_freq("clock-frequency", &ppc_proc_freq)) printk(KERN_ERR "WARNING: Estimating processor frequency " "(not found)\n"); + ppc_tb_freq = ppc_proc_freq / 16; printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); /* Perform some more timer/timebase initialization. This used @@ -157,7 +151,7 @@ void __init mpc8xx_calibrate_decr(void) */ cpu = of_find_node_by_type(NULL, "cpu"); virq= irq_of_parse_and_map(cpu, 0); - irq = irq_map[virq].hwirq; + irq = virq_to_hw(virq); sys_tmr2 = immr_map(im_sit); out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) | @@ -225,15 +219,13 @@ void mpc8xx_restart(char *cmd) static void cpm_cascade(unsigned int irq, struct irq_desc *desc) { - int cascade_irq; - - if ((cascade_irq = cpm_get_irq()) >= 0) { - struct irq_desc *cdesc = irq_desc + cascade_irq; + struct irq_chip *chip = irq_desc_get_chip(desc); + int cascade_irq = cpm_get_irq(); + if (cascade_irq >= 0) generic_handle_irq(cascade_irq); - cdesc->chip->eoi(cascade_irq); - } - desc->chip->eoi(irq); + + chip->irq_eoi(&desc->irq_data); } /* Initialize the internal interrupt controllers. The number of @@ -253,5 +245,5 @@ void __init mpc8xx_pics_init(void) irq = cpm_pic_init(); if (irq != NO_IRQ) - set_irq_chained_handler(irq, cpm_cascade); + irq_set_chained_handler(irq, cpm_cascade); } diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c index c028a5b71bb..63084640c5c 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -15,11 +15,12 @@ */ #include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> #include <linux/of_platform.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/8xx_immap.h> #include <asm/cpm1.h> @@ -65,6 +66,10 @@ static struct cpm_pin mpc866ads_pins[] = { {CPM_PORTD, 13, CPM_PIN_OUTPUT}, {CPM_PORTD, 14, CPM_PIN_OUTPUT}, {CPM_PORTD, 15, CPM_PIN_OUTPUT}, + + /* I2C */ + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, }; static void __init init_ioports(void) diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h index a5076668bad..19412f76fa3 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads.h +++ b/arch/powerpc/platforms/8xx/mpc885ads.h @@ -17,10 +17,6 @@ #include <sysdev/fsl_soc.h> -#define MPC8xx_CPM_OFFSET (0x9c0) -#define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET) -#define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver - /* Bits of interest in the BCSRs. */ #define BCSR1_ETHEN ((uint)0x20000000) diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index 6e7ded0233f..c1262581b63 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -25,6 +25,8 @@ #include <linux/fs_uart_pd.h> #include <linux/fsl_devices.h> #include <linux/mii.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> #include <linux/of_platform.h> #include <asm/delay.h> @@ -32,7 +34,6 @@ #include <asm/machdep.h> #include <asm/page.h> #include <asm/processor.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> @@ -158,6 +159,9 @@ static struct cpm_pin mpc885ads_pins[] = { {CPM_PORTE, 28, CPM_PIN_OUTPUT}, {CPM_PORTE, 29, CPM_PIN_OUTPUT}, #endif + /* I2C */ + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, }; static void __init init_ioports(void) diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c new file mode 100644 index 00000000000..251aba8759e --- /dev/null +++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c @@ -0,0 +1,155 @@ +/* + * Platform setup for the MPC8xx based boards from TQM. + * + * Heiko Schocher <hs@denx.de> + * Copyright 2010 DENX Software Engineering GmbH + * + * based on: + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/delay.h> + +#include <linux/fs_enet_pd.h> +#include <linux/fs_uart_pd.h> +#include <linux/fsl_devices.h> +#include <linux/mii.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/time.h> +#include <asm/mpc8xx.h> +#include <asm/8xx_immap.h> +#include <asm/cpm1.h> +#include <asm/fs_pd.h> +#include <asm/udbg.h> + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin tqm8xx_pins[] __initdata = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC1 */ + {CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */ + {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */ + {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, + {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, +}; + +static struct cpm_pin tqm8xx_fec_pins[] __initdata = { + /* MII */ + {CPM_PORTD, 3, CPM_PIN_OUTPUT}, + {CPM_PORTD, 4, CPM_PIN_OUTPUT}, + {CPM_PORTD, 5, CPM_PIN_OUTPUT}, + {CPM_PORTD, 6, CPM_PIN_OUTPUT}, + {CPM_PORTD, 7, CPM_PIN_OUTPUT}, + {CPM_PORTD, 8, CPM_PIN_OUTPUT}, + {CPM_PORTD, 9, CPM_PIN_OUTPUT}, + {CPM_PORTD, 10, CPM_PIN_OUTPUT}, + {CPM_PORTD, 11, CPM_PIN_OUTPUT}, + {CPM_PORTD, 12, CPM_PIN_OUTPUT}, + {CPM_PORTD, 13, CPM_PIN_OUTPUT}, + {CPM_PORTD, 14, CPM_PIN_OUTPUT}, + {CPM_PORTD, 15, CPM_PIN_OUTPUT}, +}; + +static void __init init_pins(int n, struct cpm_pin *pin) +{ + int i; + + for (i = 0; i < n; i++) { + cpm1_set_pin(pin->port, pin->pin, pin->flags); + pin++; + } +} + +static void __init init_ioports(void) +{ + struct device_node *dnode; + struct property *prop; + int len; + + init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]); + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + dnode = of_find_node_by_name(NULL, "aliases"); + if (dnode == NULL) + return; + prop = of_find_property(dnode, "ethernet1", &len); + if (prop == NULL) + return; + + /* init FEC pins */ + init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]); +} + +static void __init tqm8xx_setup_arch(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init tqm8xx_probe(void) +{ + unsigned long node = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(node, "tqc,tqm8xx"); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + { .compatible = "simple-bus" }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(tqm8xx, declare_of_platform_devices); + +define_machine(tqm8xx) { + .name = "TQM8xx", + .probe = tqm8xx_probe, + .setup_arch = tqm8xx_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; |