aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/8xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/8xx')
-rw-r--r--arch/powerpc/platforms/8xx/Kconfig330
-rw-r--r--arch/powerpc/platforms/8xx/Makefile9
-rw-r--r--arch/powerpc/platforms/8xx/adder875.c118
-rw-r--r--arch/powerpc/platforms/8xx/ep88xc.c177
-rw-r--r--arch/powerpc/platforms/8xx/m8xx_setup.c249
-rw-r--r--arch/powerpc/platforms/8xx/mpc86xads.h47
-rw-r--r--arch/powerpc/platforms/8xx/mpc86xads_setup.c151
-rw-r--r--arch/powerpc/platforms/8xx/mpc885ads.h49
-rw-r--r--arch/powerpc/platforms/8xx/mpc885ads_setup.c289
-rw-r--r--arch/powerpc/platforms/8xx/mpc8xx.h21
-rw-r--r--arch/powerpc/platforms/8xx/tqm8xx_setup.c155
11 files changed, 1345 insertions, 250 deletions
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index c8c0ba3cf8e..bd6f1a1cf92 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -1,105 +1,15 @@
config FADS
bool
+config CPM1
+ bool
+ select CPM
+
choice
prompt "8xx Machine Type"
+ depends on PPC_8xx
depends on 8xx
- default RPXLITE
-
-config RPXLITE
- bool "RPX-Lite"
- ---help---
- Single-board computers based around the PowerPC MPC8xx chips and
- intended for embedded applications. The following types are
- supported:
-
- RPX-Lite:
- Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
-
- RPX-Classic:
- Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
- the MPC 860
-
- BSE-IP:
- Bright Star Engineering ip-Engine.
-
- TQM823L:
- TQM850L:
- TQM855L:
- TQM860L:
- MPC8xx based family of mini modules, half credit card size,
- up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
- 2 x CAN bus interface, ...
- Manufacturer: TQ Components, www.tq-group.de
- Date of Release: October (?) 1999
- End of Life: not yet :-)
- URL:
- - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
- - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
- - images: <http://www.denx.de/embedded-ppc-en.html>
-
- FPS850L:
- FingerPrint Sensor System (based on TQM850L)
- Manufacturer: IKENDI AG, <http://www.ikendi.com/>
- Date of Release: November 1999
- End of life: end 2000 ?
- URL: see TQM850L
-
- IVMS8:
- MPC860 based board used in the "Integrated Voice Mail System",
- Small Version (8 voice channels)
- Manufacturer: Speech Design, <http://www.speech-design.de/>
- Date of Release: December 2000 (?)
- End of life: -
- URL: <http://www.speech-design.de/>
-
- IVML24:
- MPC860 based board used in the "Integrated Voice Mail System",
- Large Version (24 voice channels)
- Manufacturer: Speech Design, <http://www.speech-design.de/>
- Date of Release: March 2001 (?)
- End of life: -
- URL: <http://www.speech-design.de/>
-
- HERMES:
- Hermes-Pro ISDN/LAN router with integrated 8 x hub
- Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
- <http://www.multidata.de/>
- Date of Release: 2000 (?)
- End of life: -
- URL: <http://www.multidata.de/english/products/hpro.htm>
-
- IP860:
- VMEBus IP (Industry Pack) carrier board with MPC860
- Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
- Date of Release: ?
- End of life: -
- URL: <http://www.microsys.de/html/ip860.html>
-
- PCU_E:
- PCU = Peripheral Controller Unit, Extended
- Manufacturer: Siemens AG, ICN (Information and Communication Networks)
- <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
- Date of Release: April 2001
- End of life: August 2001
- URL: n. a.
-
-config RPXCLASSIC
- bool "RPX-Classic"
- help
- The RPX-Classic is a single-board computer based on the Motorola
- MPC860. It features 16MB of DRAM and a variable amount of flash,
- I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
- LEDs. Variants with Ethernet ports exist. Say Y here to support it
- directly.
-
-config BSEIP
- bool "BSE-IP"
- help
- Say Y here to support the Bright Star Engineering ipEngine SBC.
- This is a credit-card-sized device featuring a MPC823 processor,
- 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
- controller, and two RS232 ports.
+ default MPC885ADS
config MPC8XXFADS
bool "FADS"
@@ -107,110 +17,79 @@ config MPC8XXFADS
config MPC86XADS
bool "MPC86XADS"
+ select CPM1
help
MPC86x Application Development System by Freescale Semiconductor.
The MPC86xADS is meant to serve as a platform for s/w and h/w
development around the MPC86X processor families.
- select FADS
config MPC885ADS
bool "MPC885ADS"
+ select CPM1
+ select OF_DYNAMIC
help
Freescale Semiconductor MPC885 Application Development System (ADS).
Also known as DUET.
The MPC885ADS is meant to serve as a platform for s/w and h/w
development around the MPC885 processor family.
-config TQM823L
- bool "TQM823L"
- help
- Say Y here to support the TQM823L, one of an MPC8xx-based family of
- mini SBCs (half credit-card size) from TQ Components first released
- in late 1999. Technical references are at
- <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
- <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
- <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM850L
- bool "TQM850L"
+config PPC_EP88XC
+ bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
+ select CPM1
help
- Say Y here to support the TQM850L, one of an MPC8xx-based family of
- mini SBCs (half credit-card size) from TQ Components first released
- in late 1999. Technical references are at
- <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
- <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
- <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM855L
- bool "TQM855L"
- help
- Say Y here to support the TQM855L, one of an MPC8xx-based family of
- mini SBCs (half credit-card size) from TQ Components first released
- in late 1999. Technical references are at
- <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
- <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
- <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM860L
- bool "TQM860L"
- help
- Say Y here to support the TQM860L, one of an MPC8xx-based family of
- mini SBCs (half credit-card size) from TQ Components first released
- in late 1999. Technical references are at
- <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
- <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
- <http://www.denx.de/embedded-ppc-en.html>.
-
-config FPS850L
- bool "FPS850L"
-
-config IVMS8
- bool "IVMS8"
- help
- Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
- from Speech Design, released March 2001. The manufacturer's website
- is at <http://www.speech-design.de/>.
+ This enables support for the Embedded Planet EP88xC board.
-config IVML24
- bool "IVML24"
+ This board is also resold by Freescale as the QUICCStart
+ MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
+
+config PPC_ADDER875
+ bool "Analogue & Micro Adder 875"
+ select CPM1
help
- Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
- from Speech Design, released March 2001. The manufacturer's website
- is at <http://www.speech-design.de/>.
+ This enables support for the Analogue & Micro Adder 875
+ board.
-config HERMES_PRO
- bool "HERMES"
+config TQM8XX
+ bool "TQM8XX"
+ select CPM1
+ help
+ support for the mpc8xx based boards from TQM.
-config IP860
- bool "IP860"
+endchoice
-config LWMON
- bool "LWMON"
+menu "Freescale Ethernet driver platform-specific options"
+ depends on (FS_ENET && MPC885ADS)
-config PCU_E
- bool "PCU_E"
+ config MPC8xx_SECOND_ETH
+ bool "Second Ethernet channel"
+ depends on MPC885ADS
+ default y
+ help
+ This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
+ The latter will use SCC1, for 885ADS you can select it below.
-config CCM
- bool "CCM"
+ choice
+ prompt "Second Ethernet channel"
+ depends on MPC8xx_SECOND_ETH
+ default MPC8xx_SECOND_ETH_FEC2
-config LANTEC
- bool "LANTEC"
+ config MPC8xx_SECOND_ETH_FEC2
+ bool "FEC2"
+ depends on MPC885ADS
+ help
+ Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
+ (often 2-nd UART) will not work if this is enabled.
-config MBX
- bool "MBX"
- help
- MBX is a line of Motorola single-board computer based around the
- MPC821 and MPC860 processors, and intended for embedded-controller
- applications. Say Y here to support these boards directly.
+ config MPC8xx_SECOND_ETH_SCC3
+ bool "SCC3"
+ depends on MPC885ADS
+ help
+ Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
+ (often 1-nd UART) will not work if this is enabled.
-config WINCEPT
- bool "WinCept"
- help
- The Wincept 100/110 is a Motorola single-board computer based on the
- MPC821 PowerPC, introduced in 1998 and designed to be used in
- thin-client machines. Say Y to support it directly.
+ endchoice
-endchoice
+endmenu
#
# MPC8xx Communication options
@@ -219,79 +98,6 @@ endchoice
menu "MPC8xx CPM Options"
depends on 8xx
-config SCC_ENET
- bool "CPM SCC Ethernet"
- depends on NET_ETHERNET
- help
- Enable Ethernet support via the Motorola MPC8xx serial
- communications controller.
-
-choice
- prompt "SCC used for Ethernet"
- depends on SCC_ENET
- default SCC1_ENET
-
-config SCC1_ENET
- bool "SCC1"
- help
- Use MPC8xx serial communications controller 1 to drive Ethernet
- (default).
-
-config SCC2_ENET
- bool "SCC2"
- help
- Use MPC8xx serial communications controller 2 to drive Ethernet.
-
-config SCC3_ENET
- bool "SCC3"
- help
- Use MPC8xx serial communications controller 3 to drive Ethernet.
-
-endchoice
-
-config FEC_ENET
- bool "860T FEC Ethernet"
- depends on NET_ETHERNET
- help
- Enable Ethernet support via the Fast Ethernet Controller (FCC) on
- the Motorola MPC8260.
-
-config USE_MDIO
- bool "Use MDIO for PHY configuration"
- depends on FEC_ENET
- help
- On some boards the hardware configuration of the ethernet PHY can be
- used without any software interaction over the MDIO interface, so
- all MII code can be omitted. Say N here if unsure or if you don't
- need link status reports.
-
-config FEC_AM79C874
- bool "Support AMD79C874 PHY"
- depends on USE_MDIO
-
-config FEC_LXT970
- bool "Support LXT970 PHY"
- depends on USE_MDIO
-
-config FEC_LXT971
- bool "Support LXT971 PHY"
- depends on USE_MDIO
-
-config FEC_QS6612
- bool "Support QS6612 PHY"
- depends on USE_MDIO
-
-config ENET_BIG_BUFFERS
- bool "Use Big CPM Ethernet Buffers"
- depends on SCC_ENET || FEC_ENET
- help
- Allocate large buffers for MPC8xx Ethernet. Increases throughput
- and decreases the likelihood of dropped packets, but costs memory.
-
-config HTDMSOUND
- bool "Embedded Planet HIOX Audio"
- depends on SOUND=y
-
# This doesn't really belong here, but it is convenient to ask
# 8xx specific questions.
comment "Generic MPC8xx Options"
@@ -305,6 +111,15 @@ config 8xx_COPYBACK
If in doubt, say Y here.
+config 8xx_GPIO
+ bool "GPIO API Support"
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Saying Y here will cause the ports on an MPC8xx processor to be used
+ with the GPIO API. If you say N here, the kernel needs less memory.
+
+ If in doubt, say Y here.
+
config 8xx_CPU6
bool "CPU6 Silicon Errata (860 Pre Rev. C)"
help
@@ -312,11 +127,27 @@ config 8xx_CPU6
require workarounds for Linux (and most other OSes to work). If you
get a BUG() very early in boot, this might fix the problem. For
more details read the document entitled "MPC860 Family Device Errata
- Reference" on Motorola's website. This option also incurs a
+ Reference" on Freescale's website. This option also incurs a
performance hit.
If in doubt, say N here.
+config 8xx_CPU15
+ bool "CPU15 Silicon Errata"
+ default y
+ help
+ This enables a workaround for erratum CPU15 on MPC8xx chips.
+ This bug can cause incorrect code execution under certain
+ circumstances. This workaround adds some overhead (a TLB miss
+ every time execution crosses a page boundary), and you may wish
+ to disable it if you have worked around the bug in the compiler
+ (by not placing conditional branches or branches to LR or CTR
+ in the last word of a page, with a target of the last cache
+ line in the next page), or if you have used some other
+ workaround.
+
+ If in doubt, say Y here.
+
choice
prompt "Microcode patch selection"
default NO_UCODE_PATCH
@@ -349,4 +180,3 @@ config UCODE_PATCH
depends on !NO_UCODE_PATCH
endmenu
-
diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile
new file mode 100644
index 00000000000..76a81c3350a
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the PowerPC 8xx linux kernel.
+#
+obj-$(CONFIG_PPC_8xx) += m8xx_setup.o
+obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
+obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o
+obj-$(CONFIG_PPC_EP88XC) += ep88xc.o
+obj-$(CONFIG_PPC_ADDER875) += adder875.o
+obj-$(CONFIG_TQM8XX) += tqm8xx_setup.o
diff --git a/arch/powerpc/platforms/8xx/adder875.c b/arch/powerpc/platforms/8xx/adder875.c
new file mode 100644
index 00000000000..82363e98f50
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/adder875.c
@@ -0,0 +1,118 @@
+/* Analogue & Micro Adder MPC875 board support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/fs_enet_pd.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+
+#include "mpc8xx.h"
+
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static __initdata struct cpm_pin adder875_pins[] = {
+ /* SMC1 */
+ {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+ /* MII1 */
+ {CPM_PORTA, 0, CPM_PIN_INPUT},
+ {CPM_PORTA, 1, CPM_PIN_INPUT},
+ {CPM_PORTA, 2, CPM_PIN_INPUT},
+ {CPM_PORTA, 3, CPM_PIN_INPUT},
+ {CPM_PORTA, 4, CPM_PIN_OUTPUT},
+ {CPM_PORTA, 10, CPM_PIN_OUTPUT},
+ {CPM_PORTA, 11, CPM_PIN_OUTPUT},
+ {CPM_PORTB, 19, CPM_PIN_INPUT},
+ {CPM_PORTB, 31, CPM_PIN_INPUT},
+ {CPM_PORTC, 12, CPM_PIN_INPUT},
+ {CPM_PORTC, 13, CPM_PIN_INPUT},
+ {CPM_PORTE, 30, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 31, CPM_PIN_OUTPUT},
+
+ /* MII2 */
+ {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 16, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 21, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 22, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 23, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 24, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 25, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 26, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 27, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 28, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 29, CPM_PIN_OUTPUT},
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(adder875_pins); i++) {
+ const struct cpm_pin *pin = &adder875_pins[i];
+ cpm1_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+
+ /* Set FEC1 and FEC2 to MII mode */
+ clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
+}
+
+static void __init adder875_setup(void)
+{
+ cpm_reset();
+ init_ioports();
+}
+
+static int __init adder875_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "analogue-and-micro,adder875");
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+ return 0;
+}
+machine_device_initcall(adder875, declare_of_platform_devices);
+
+define_machine(adder875) {
+ .name = "Adder MPC875",
+ .probe = adder875_probe,
+ .setup_arch = adder875_setup,
+ .init_IRQ = mpc8xx_pics_init,
+ .get_irq = mpc8xx_get_irq,
+ .restart = mpc8xx_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .set_rtc_time = mpc8xx_set_rtc_time,
+ .get_rtc_time = mpc8xx_get_rtc_time,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/8xx/ep88xc.c b/arch/powerpc/platforms/8xx/ep88xc.c
new file mode 100644
index 00000000000..e62166681d0
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/ep88xc.c
@@ -0,0 +1,177 @@
+/*
+ * Platform setup for the Embedded Planet EP88xC board
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/udbg.h>
+#include <asm/cpm1.h>
+
+#include "mpc8xx.h"
+
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static struct cpm_pin ep88xc_pins[] = {
+ /* SMC1 */
+ {1, 24, CPM_PIN_INPUT}, /* RX */
+ {1, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+ /* SCC2 */
+ {0, 12, CPM_PIN_INPUT}, /* TX */
+ {0, 13, CPM_PIN_INPUT}, /* RX */
+ {2, 8, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CD */
+ {2, 9, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CTS */
+ {2, 14, CPM_PIN_INPUT}, /* RTS */
+
+ /* MII1 */
+ {0, 0, CPM_PIN_INPUT},
+ {0, 1, CPM_PIN_INPUT},
+ {0, 2, CPM_PIN_INPUT},
+ {0, 3, CPM_PIN_INPUT},
+ {0, 4, CPM_PIN_OUTPUT},
+ {0, 10, CPM_PIN_OUTPUT},
+ {0, 11, CPM_PIN_OUTPUT},
+ {1, 19, CPM_PIN_INPUT},
+ {1, 31, CPM_PIN_INPUT},
+ {2, 12, CPM_PIN_INPUT},
+ {2, 13, CPM_PIN_INPUT},
+ {3, 8, CPM_PIN_INPUT},
+ {4, 30, CPM_PIN_OUTPUT},
+ {4, 31, CPM_PIN_OUTPUT},
+
+ /* MII2 */
+ {4, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {4, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {4, 16, CPM_PIN_OUTPUT},
+ {4, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {4, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {4, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {4, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {4, 21, CPM_PIN_OUTPUT},
+ {4, 22, CPM_PIN_OUTPUT},
+ {4, 23, CPM_PIN_OUTPUT},
+ {4, 24, CPM_PIN_OUTPUT},
+ {4, 25, CPM_PIN_OUTPUT},
+ {4, 26, CPM_PIN_OUTPUT},
+ {4, 27, CPM_PIN_OUTPUT},
+ {4, 28, CPM_PIN_OUTPUT},
+ {4, 29, CPM_PIN_OUTPUT},
+
+ /* USB */
+ {0, 6, CPM_PIN_INPUT}, /* CLK2 */
+ {0, 14, CPM_PIN_INPUT}, /* USBOE */
+ {0, 15, CPM_PIN_INPUT}, /* USBRXD */
+ {2, 6, CPM_PIN_OUTPUT}, /* USBTXN */
+ {2, 7, CPM_PIN_OUTPUT}, /* USBTXP */
+ {2, 10, CPM_PIN_INPUT}, /* USBRXN */
+ {2, 11, CPM_PIN_INPUT}, /* USBRXP */
+
+ /* Misc */
+ {1, 26, CPM_PIN_INPUT}, /* BRGO2 */
+ {1, 27, CPM_PIN_INPUT}, /* BRGO1 */
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ep88xc_pins); i++) {
+ struct cpm_pin *pin = &ep88xc_pins[i];
+ cpm1_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+ cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_TX); /* USB */
+ cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX);
+ cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+ cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+}
+
+static u8 __iomem *ep88xc_bcsr;
+
+#define BCSR7_SCC2_ENABLE 0x10
+
+#define BCSR8_PHY1_ENABLE 0x80
+#define BCSR8_PHY1_POWER 0x40
+#define BCSR8_PHY2_ENABLE 0x20
+#define BCSR8_PHY2_POWER 0x10
+
+#define BCSR9_USB_ENABLE 0x80
+#define BCSR9_USB_POWER 0x40
+#define BCSR9_USB_HOST 0x20
+#define BCSR9_USB_FULL_SPEED_TARGET 0x10
+
+static void __init ep88xc_setup_arch(void)
+{
+ struct device_node *np;
+
+ cpm_reset();
+ init_ioports();
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,ep88xc-bcsr");
+ if (!np) {
+ printk(KERN_CRIT "Could not find fsl,ep88xc-bcsr node\n");
+ return;
+ }
+
+ ep88xc_bcsr = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!ep88xc_bcsr) {
+ printk(KERN_CRIT "Could not remap BCSR\n");
+ return;
+ }
+
+ setbits8(&ep88xc_bcsr[7], BCSR7_SCC2_ENABLE);
+ setbits8(&ep88xc_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER |
+ BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER);
+}
+
+static int __init ep88xc_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "fsl,ep88xc");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ /* Publish the QE devices */
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(ep88xc, declare_of_platform_devices);
+
+define_machine(ep88xc) {
+ .name = "Embedded Planet EP88xC",
+ .probe = ep88xc_probe,
+ .setup_arch = ep88xc_setup_arch,
+ .init_IRQ = mpc8xx_pics_init,
+ .get_irq = mpc8xx_get_irq,
+ .restart = mpc8xx_restart,
+ .calibrate_decr = mpc8xx_calibrate_decr,
+ .set_rtc_time = mpc8xx_set_rtc_time,
+ .get_rtc_time = mpc8xx_get_rtc_time,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
new file mode 100644
index 00000000000..587a2828b06
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 1995 Linus Torvalds
+ * Adapted from 'alpha' version by Gary Thomas
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
+ * Further modified for generic 8xx by Dan.
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/io.h>
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/prom.h>
+#include <asm/fs_pd.h>
+#include <mm/mmu_decl.h>
+
+#include <sysdev/mpc8xx_pic.h>
+
+#include "mpc8xx.h"
+
+struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+
+extern int cpm_pic_init(void);
+extern int cpm_get_irq(void);
+
+/* A place holder for time base interrupts, if they are ever enabled. */
+static irqreturn_t timebase_interrupt(int irq, void *dev)
+{
+ printk ("timebase_interrupt()\n");
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction tbint_irqaction = {
+ .handler = timebase_interrupt,
+ .flags = IRQF_NO_THREAD,
+ .name = "tbint",
+};
+
+/* per-board overridable init_internal_rtc() function. */
+void __init __attribute__ ((weak))
+init_internal_rtc(void)
+{
+ sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
+
+ /* Disable the RTC one second and alarm interrupts. */
+ clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
+
+ /* Enable the RTC */
+ setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
+ immr_unmap(sys_tmr);
+}
+
+static int __init get_freq(char *name, unsigned long *val)
+{
+ struct device_node *cpu;
+ const unsigned int *fp;
+ int found = 0;
+
+ /* The cpu node should have timebase and clock frequency properties */
+ cpu = of_find_node_by_type(NULL, "cpu");
+
+ if (cpu) {
+ fp = of_get_property(cpu, name, NULL);
+ if (fp) {
+ found = 1;
+ *val = *fp;
+ }
+
+ of_node_put(cpu);
+ }
+
+ return found;
+}
+
+/* The decrementer counts at the system (internal) clock frequency divided by
+ * sixteen, or external oscillator divided by four. We force the processor
+ * to use system clock divided by sixteen.
+ */
+void __init mpc8xx_calibrate_decr(void)
+{
+ struct device_node *cpu;
+ cark8xx_t __iomem *clk_r1;
+ car8xx_t __iomem *clk_r2;
+ sitk8xx_t __iomem *sys_tmr1;
+ sit8xx_t __iomem *sys_tmr2;
+ int irq, virq;
+
+ clk_r1 = immr_map(im_clkrstk);
+
+ /* Unlock the SCCR. */
+ out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY);
+ out_be32(&clk_r1->cark_sccrk, KAPWR_KEY);
+ immr_unmap(clk_r1);
+
+ /* Force all 8xx processors to use divide by 16 processor clock. */
+ clk_r2 = immr_map(im_clkrst);
+ setbits32(&clk_r2->car_sccr, 0x02000000);
+ immr_unmap(clk_r2);
+
+ /* Processor frequency is MHz.
+ */
+ ppc_proc_freq = 50000000;
+ if (!get_freq("clock-frequency", &ppc_proc_freq))
+ printk(KERN_ERR "WARNING: Estimating processor frequency "
+ "(not found)\n");
+
+ ppc_tb_freq = ppc_proc_freq / 16;
+ printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
+
+ /* Perform some more timer/timebase initialization. This used
+ * to be done elsewhere, but other changes caused it to get
+ * called more than once....that is a bad thing.
+ *
+ * First, unlock all of the registers we are going to modify.
+ * To protect them from corruption during power down, registers
+ * that are maintained by keep alive power are "locked". To
+ * modify these registers we have to write the key value to
+ * the key location associated with the register.
+ * Some boards power up with these unlocked, while others
+ * are locked. Writing anything (including the unlock code?)
+ * to the unlocked registers will lock them again. So, here
+ * we guarantee the registers are locked, then we unlock them
+ * for our use.
+ */
+ sys_tmr1 = immr_map(im_sitk);
+ out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY);
+ out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY);
+ out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY);
+ out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY);
+ out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY);
+ out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY);
+ immr_unmap(sys_tmr1);
+
+ init_internal_rtc();
+
+ /* Enabling the decrementer also enables the timebase interrupts
+ * (or from the other point of view, to get decrementer interrupts
+ * we have to enable the timebase). The decrementer interrupt
+ * is wired into the vector table, nothing to do here for that.
+ */
+ cpu = of_find_node_by_type(NULL, "cpu");
+ virq= irq_of_parse_and_map(cpu, 0);
+ irq = virq_to_hw(virq);
+
+ sys_tmr2 = immr_map(im_sit);
+ out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
+ (TBSCR_TBF | TBSCR_TBE));
+ immr_unmap(sys_tmr2);
+
+ if (setup_irq(virq, &tbint_irqaction))
+ panic("Could not allocate timer IRQ!");
+}
+
+/* The RTC on the MPC8xx is an internal register.
+ * We want to protect this during power down, so we need to unlock,
+ * modify, and re-lock.
+ */
+
+int mpc8xx_set_rtc_time(struct rtc_time *tm)
+{
+ sitk8xx_t __iomem *sys_tmr1;
+ sit8xx_t __iomem *sys_tmr2;
+ int time;
+
+ sys_tmr1 = immr_map(im_sitk);
+ sys_tmr2 = immr_map(im_sit);
+ time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY);
+ out_be32(&sys_tmr2->sit_rtc, time);
+ out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY);
+
+ immr_unmap(sys_tmr2);
+ immr_unmap(sys_tmr1);
+ return 0;
+}
+
+void mpc8xx_get_rtc_time(struct rtc_time *tm)
+{
+ unsigned long data;
+ sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
+
+ /* Get time from the RTC. */
+ data = in_be32(&sys_tmr->sit_rtc);
+ to_tm(data, tm);
+ tm->tm_year -= 1900;
+ tm->tm_mon -= 1;
+ immr_unmap(sys_tmr);
+ return;
+}
+
+void mpc8xx_restart(char *cmd)
+{
+ car8xx_t __iomem *clk_r = immr_map(im_clkrst);
+
+
+ local_irq_disable();
+
+ setbits32(&clk_r->car_plprcr, 0x00000080);
+ /* Clear the ME bit in MSR to cause checkstop on machine check
+ */
+ mtmsr(mfmsr() & ~0x1000);
+
+ in_8(&clk_r->res[0]);
+ panic("Restart failed\n");
+}
+
+static void cpm_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ int cascade_irq = cpm_get_irq();
+
+ if (cascade_irq >= 0)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+/* Initialize the internal interrupt controllers. The number of
+ * interrupts supported can vary with the processor type, and the
+ * 82xx family can have up to 64.
+ * External interrupts can be either edge or level triggered, and
+ * need to be initialized by the appropriate driver.
+ */
+void __init mpc8xx_pics_init(void)
+{
+ int irq;
+
+ if (mpc8xx_pic_init()) {
+ printk(KERN_ERR "Failed interrupt 8xx controller initialization\n");
+ return;
+ }
+
+ irq = cpm_pic_init();
+ if (irq != NO_IRQ)
+ irq_set_chained_handler(irq, cpm_cascade);
+}
diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h
new file mode 100644
index 00000000000..17b1fe75e0b
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc86xads.h
@@ -0,0 +1,47 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Freescale MPC86xADS board.
+ * Copied from the FADS stuff.
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MPC86XADS_H__
+#define __ASM_MPC86XADS_H__
+
+/* Bits of interest in the BCSRs.
+ */
+#define BCSR1_ETHEN ((uint)0x20000000)
+#define BCSR1_IRDAEN ((uint)0x10000000)
+#define BCSR1_RS232EN_1 ((uint)0x01000000)
+#define BCSR1_PCCEN ((uint)0x00800000)
+#define BCSR1_PCCVCC0 ((uint)0x00400000)
+#define BCSR1_PCCVPP0 ((uint)0x00200000)
+#define BCSR1_PCCVPP1 ((uint)0x00100000)
+#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
+#define BCSR1_RS232EN_2 ((uint)0x00040000)
+#define BCSR1_PCCVCC1 ((uint)0x00010000)
+#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
+
+#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/
+#define BCSR4_USB_LO_SPD ((uint)0x04000000)
+#define BCSR4_USB_VCC ((uint)0x02000000)
+#define BCSR4_USB_FULL_SPD ((uint)0x00040000)
+#define BCSR4_USB_EN ((uint)0x00020000)
+
+#define BCSR5_MII2_EN 0x40
+#define BCSR5_MII2_RST 0x20
+#define BCSR5_T1_RST 0x10
+#define BCSR5_ATM155_RST 0x08
+#define BCSR5_ATM25_RST 0x04
+#define BCSR5_MII1_EN 0x02
+#define BCSR5_MII1_RST 0x01
+
+#endif /* __ASM_MPC86XADS_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
new file mode 100644
index 00000000000..63084640c5c
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -0,0 +1,151 @@
+/*arch/powerpc/platforms/8xx/mpc86xads_setup.c
+ *
+ * Platform setup for the Freescale mpc86xads board
+ *
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#include "mpc86xads.h"
+#include "mpc8xx.h"
+
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static struct cpm_pin mpc866ads_pins[] = {
+ /* SMC1 */
+ {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+ /* SMC2 */
+ {CPM_PORTB, 21, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTB, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+ /* SCC1 */
+ {CPM_PORTA, 6, CPM_PIN_INPUT}, /* CLK1 */
+ {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */
+ {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */
+ {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTB, 19, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+ {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
+ {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
+
+ /* MII */
+ {CPM_PORTD, 3, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 4, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 5, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 6, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 7, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 8, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 9, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 10, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 11, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 12, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 13, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 14, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 15, CPM_PIN_OUTPUT},
+
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mpc866ads_pins); i++) {
+ struct cpm_pin *pin = &mpc866ads_pins[i];
+ cpm1_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+ cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
+ cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK1, CPM_CLK_TX);
+ cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX);
+
+ /* Set FEC1 and FEC2 to MII mode */
+ clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
+}
+
+static void __init mpc86xads_setup_arch(void)
+{
+ struct device_node *np;
+ u32 __iomem *bcsr_io;
+
+ cpm_reset();
+ init_ioports();
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc866ads-bcsr");
+ if (!np) {
+ printk(KERN_CRIT "Could not find fsl,mpc866ads-bcsr node\n");
+ return;
+ }
+
+ bcsr_io = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (bcsr_io == NULL) {
+ printk(KERN_CRIT "Could not remap BCSR\n");
+ return;
+ }
+
+ clrbits32(bcsr_io, BCSR1_RS232EN_1 | BCSR1_RS232EN_2 | BCSR1_ETHEN);
+ iounmap(bcsr_io);
+}
+
+static int __init mpc86xads_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "fsl,mpc866ads");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(mpc86x_ads, declare_of_platform_devices);
+
+define_machine(mpc86x_ads) {
+ .name = "MPC86x ADS",
+ .probe = mpc86xads_probe,
+ .setup_arch = mpc86xads_setup_arch,
+ .init_IRQ = mpc8xx_pics_init,
+ .get_irq = mpc8xx_get_irq,
+ .restart = mpc8xx_restart,
+ .calibrate_decr = mpc8xx_calibrate_decr,
+ .set_rtc_time = mpc8xx_set_rtc_time,
+ .get_rtc_time = mpc8xx_get_rtc_time,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
new file mode 100644
index 00000000000..19412f76fa3
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -0,0 +1,49 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Freescale MPC885ADS board.
+ * Copied from the FADS stuff.
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MPC885ADS_H__
+#define __ASM_MPC885ADS_H__
+
+#include <sysdev/fsl_soc.h>
+
+/* Bits of interest in the BCSRs.
+ */
+#define BCSR1_ETHEN ((uint)0x20000000)
+#define BCSR1_IRDAEN ((uint)0x10000000)
+#define BCSR1_RS232EN_1 ((uint)0x01000000)
+#define BCSR1_PCCEN ((uint)0x00800000)
+#define BCSR1_PCCVCC0 ((uint)0x00400000)
+#define BCSR1_PCCVPP0 ((uint)0x00200000)
+#define BCSR1_PCCVPP1 ((uint)0x00100000)
+#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
+#define BCSR1_RS232EN_2 ((uint)0x00040000)
+#define BCSR1_PCCVCC1 ((uint)0x00010000)
+#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
+
+#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/
+#define BCSR4_USB_LO_SPD ((uint)0x04000000)
+#define BCSR4_USB_VCC ((uint)0x02000000)
+#define BCSR4_USB_FULL_SPD ((uint)0x00040000)
+#define BCSR4_USB_EN ((uint)0x00020000)
+
+#define BCSR5_MII2_EN 0x40
+#define BCSR5_MII2_RST 0x20
+#define BCSR5_T1_RST 0x10
+#define BCSR5_ATM155_RST 0x08
+#define BCSR5_ATM25_RST 0x04
+#define BCSR5_MII1_EN 0x02
+#define BCSR5_MII1_RST 0x01
+
+#endif /* __ASM_MPC885ADS_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
new file mode 100644
index 00000000000..c1262581b63
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -0,0 +1,289 @@
+/*
+ * Platform setup for the Freescale mpc885ads board
+ *
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
+#include <linux/mii.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#include "mpc885ads.h"
+#include "mpc8xx.h"
+
+static u32 __iomem *bcsr, *bcsr5;
+
+#ifdef CONFIG_PCMCIA_M8XX
+static void pcmcia_hw_setup(int slot, int enable)
+{
+ if (enable)
+ clrbits32(&bcsr[1], BCSR1_PCCEN);
+ else
+ setbits32(&bcsr[1], BCSR1_PCCEN);
+}
+
+static int pcmcia_set_voltage(int slot, int vcc, int vpp)
+{
+ u32 reg = 0;
+
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= BCSR1_PCCVCC0;
+ break;
+ case 50:
+ reg |= BCSR1_PCCVCC1;
+ break;
+ default:
+ return 1;
+ }
+
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= BCSR1_PCCVPP1;
+ else
+ return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= BCSR1_PCCVPP0;
+ else
+ return 1;
+ default:
+ return 1;
+ }
+
+ /* first, turn off all power */
+ clrbits32(&bcsr[1], 0x00610000);
+
+ /* enable new powersettings */
+ setbits32(&bcsr[1], reg);
+
+ return 0;
+}
+#endif
+
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static struct cpm_pin mpc885ads_pins[] = {
+ /* SMC1 */
+ {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+ /* SMC2 */
+#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ {CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+#endif
+
+ /* SCC3 */
+ {CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
+ {CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
+ {CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
+ {CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+ {CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
+ {CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
+
+ /* MII1 */
+ {CPM_PORTA, 0, CPM_PIN_INPUT},
+ {CPM_PORTA, 1, CPM_PIN_INPUT},
+ {CPM_PORTA, 2, CPM_PIN_INPUT},
+ {CPM_PORTA, 3, CPM_PIN_INPUT},
+ {CPM_PORTA, 4, CPM_PIN_OUTPUT},
+ {CPM_PORTA, 10, CPM_PIN_OUTPUT},
+ {CPM_PORTA, 11, CPM_PIN_OUTPUT},
+ {CPM_PORTB, 19, CPM_PIN_INPUT},
+ {CPM_PORTB, 31, CPM_PIN_INPUT},
+ {CPM_PORTC, 12, CPM_PIN_INPUT},
+ {CPM_PORTC, 13, CPM_PIN_INPUT},
+ {CPM_PORTE, 30, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 31, CPM_PIN_OUTPUT},
+
+ /* MII2 */
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 16, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 21, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 22, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 23, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 24, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 25, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 26, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 27, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 28, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 29, CPM_PIN_OUTPUT},
+#endif
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
+ struct cpm_pin *pin = &mpc885ads_pins[i];
+ cpm1_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+ cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
+ cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
+ cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
+
+ /* Set FEC1 and FEC2 to MII mode */
+ clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
+}
+
+static void __init mpc885ads_setup_arch(void)
+{
+ struct device_node *np;
+
+ cpm_reset();
+ init_ioports();
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
+ if (!np) {
+ printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
+ return;
+ }
+
+ bcsr = of_iomap(np, 0);
+ bcsr5 = of_iomap(np, 1);
+ of_node_put(np);
+
+ if (!bcsr || !bcsr5) {
+ printk(KERN_CRIT "Could not remap BCSR\n");
+ return;
+ }
+
+ clrbits32(&bcsr[1], BCSR1_RS232EN_1);
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ setbits32(&bcsr[1], BCSR1_RS232EN_2);
+#else
+ clrbits32(&bcsr[1], BCSR1_RS232EN_2);
+#endif
+
+ clrbits32(bcsr5, BCSR5_MII1_EN);
+ setbits32(bcsr5, BCSR5_MII1_RST);
+ udelay(1000);
+ clrbits32(bcsr5, BCSR5_MII1_RST);
+
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ clrbits32(bcsr5, BCSR5_MII2_EN);
+ setbits32(bcsr5, BCSR5_MII2_RST);
+ udelay(1000);
+ clrbits32(bcsr5, BCSR5_MII2_RST);
+#else
+ setbits32(bcsr5, BCSR5_MII2_EN);
+#endif
+
+#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
+ clrbits32(&bcsr[4], BCSR4_ETH10_RST);
+ udelay(1000);
+ setbits32(&bcsr[4], BCSR4_ETH10_RST);
+
+ setbits32(&bcsr[1], BCSR1_ETHEN);
+
+ np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
+#else
+ np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
+#endif
+
+ /* The SCC3 enet registers overlap the SMC1 registers, so
+ * one of the two must be removed from the device tree.
+ */
+
+ if (np) {
+ of_detach_node(np);
+ of_node_put(np);
+ }
+
+#ifdef CONFIG_PCMCIA_M8XX
+ /* Set up board specific hook-ups.*/
+ m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
+ m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
+#endif
+}
+
+static int __init mpc885ads_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "fsl,mpc885ads");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ /* Publish the QE devices */
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(mpc885_ads, declare_of_platform_devices);
+
+define_machine(mpc885_ads) {
+ .name = "Freescale MPC885 ADS",
+ .probe = mpc885ads_probe,
+ .setup_arch = mpc885ads_setup_arch,
+ .init_IRQ = mpc8xx_pics_init,
+ .get_irq = mpc8xx_get_irq,
+ .restart = mpc8xx_restart,
+ .calibrate_decr = mpc8xx_calibrate_decr,
+ .set_rtc_time = mpc8xx_set_rtc_time,
+ .get_rtc_time = mpc8xx_get_rtc_time,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/8xx/mpc8xx.h b/arch/powerpc/platforms/8xx/mpc8xx.h
new file mode 100644
index 00000000000..239a243a616
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc8xx.h
@@ -0,0 +1,21 @@
+/*
+ * Prototypes, etc. for the Freescale MPC8xx embedded cpu chips
+ * May need to be cleaned as the port goes on ...
+ *
+ * Copyright (C) 2008 Jochen Friedrich <jochen@scram.de>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __MPC8xx_H
+#define __MPC8xx_H
+
+extern void mpc8xx_restart(char *cmd);
+extern void mpc8xx_calibrate_decr(void);
+extern int mpc8xx_set_rtc_time(struct rtc_time *tm);
+extern void mpc8xx_get_rtc_time(struct rtc_time *tm);
+extern void mpc8xx_pics_init(void);
+extern unsigned int mpc8xx_get_irq(void);
+
+#endif /* __MPC8xx_H */
diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
new file mode 100644
index 00000000000..251aba8759e
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
@@ -0,0 +1,155 @@
+/*
+ * Platform setup for the MPC8xx based boards from TQM.
+ *
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2010 DENX Software Engineering GmbH
+ *
+ * based on:
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
+#include <linux/mii.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#include "mpc8xx.h"
+
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static struct cpm_pin tqm8xx_pins[] __initdata = {
+ /* SMC1 */
+ {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+ /* SCC1 */
+ {CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */
+ {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */
+ {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */
+ {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+ {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+ {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+};
+
+static struct cpm_pin tqm8xx_fec_pins[] __initdata = {
+ /* MII */
+ {CPM_PORTD, 3, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 4, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 5, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 6, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 7, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 8, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 9, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 10, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 11, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 12, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 13, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 14, CPM_PIN_OUTPUT},
+ {CPM_PORTD, 15, CPM_PIN_OUTPUT},
+};
+
+static void __init init_pins(int n, struct cpm_pin *pin)
+{
+ int i;
+
+ for (i = 0; i < n; i++) {
+ cpm1_set_pin(pin->port, pin->pin, pin->flags);
+ pin++;
+ }
+}
+
+static void __init init_ioports(void)
+{
+ struct device_node *dnode;
+ struct property *prop;
+ int len;
+
+ init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]);
+
+ cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+
+ dnode = of_find_node_by_name(NULL, "aliases");
+ if (dnode == NULL)
+ return;
+ prop = of_find_property(dnode, "ethernet1", &len);
+ if (prop == NULL)
+ return;
+
+ /* init FEC pins */
+ init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]);
+}
+
+static void __init tqm8xx_setup_arch(void)
+{
+ cpm_reset();
+ init_ioports();
+}
+
+static int __init tqm8xx_probe(void)
+{
+ unsigned long node = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(node, "tqc,tqm8xx");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ { .compatible = "simple-bus" },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(tqm8xx, declare_of_platform_devices);
+
+define_machine(tqm8xx) {
+ .name = "TQM8xx",
+ .probe = tqm8xx_probe,
+ .setup_arch = tqm8xx_setup_arch,
+ .init_IRQ = mpc8xx_pics_init,
+ .get_irq = mpc8xx_get_irq,
+ .restart = mpc8xx_restart,
+ .calibrate_decr = mpc8xx_calibrate_decr,
+ .set_rtc_time = mpc8xx_set_rtc_time,
+ .get_rtc_time = mpc8xx_get_rtc_time,
+ .progress = udbg_progress,
+};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-14 11:58:34 +0000