diff options
Diffstat (limited to 'arch/powerpc/platforms/8xx')
| -rw-r--r-- | arch/powerpc/platforms/8xx/Kconfig | 49 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/Makefile | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/adder875.c | 118 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/ep88xc.c | 177 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/m8xx_setup.c | 176 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc86xads.h | 48 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc86xads_setup.c | 326 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc885ads.h | 46 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc885ads_setup.c | 492 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mpc8xx.h | 21 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/tqm8xx_setup.c | 155 |
11 files changed, 869 insertions, 742 deletions
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 39bb8c5ebe7..bd6f1a1cf92 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -3,6 +3,7 @@ config FADS config CPM1 bool + select CPM choice prompt "8xx Machine Type" @@ -25,12 +26,35 @@ config MPC86XADS config MPC885ADS bool "MPC885ADS" select CPM1 + select OF_DYNAMIC help Freescale Semiconductor MPC885 Application Development System (ADS). Also known as DUET. The MPC885ADS is meant to serve as a platform for s/w and h/w development around the MPC885 processor family. +config PPC_EP88XC + bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)" + select CPM1 + help + This enables support for the Embedded Planet EP88xC board. + + This board is also resold by Freescale as the QUICCStart + MPC885 Evaluation System and/or the CWH-PPC-885XN-VE. + +config PPC_ADDER875 + bool "Analogue & Micro Adder 875" + select CPM1 + help + This enables support for the Analogue & Micro Adder 875 + board. + +config TQM8XX + bool "TQM8XX" + select CPM1 + help + support for the mpc8xx based boards from TQM. + endchoice menu "Freescale Ethernet driver platform-specific options" @@ -87,6 +111,15 @@ config 8xx_COPYBACK If in doubt, say Y here. +config 8xx_GPIO + bool "GPIO API Support" + select ARCH_REQUIRE_GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + config 8xx_CPU6 bool "CPU6 Silicon Errata (860 Pre Rev. C)" help @@ -99,6 +132,22 @@ config 8xx_CPU6 If in doubt, say N here. +config 8xx_CPU15 + bool "CPU15 Silicon Errata" + default y + help + This enables a workaround for erratum CPU15 on MPC8xx chips. + This bug can cause incorrect code execution under certain + circumstances. This workaround adds some overhead (a TLB miss + every time execution crosses a page boundary), and you may wish + to disable it if you have worked around the bug in the compiler + (by not placing conditional branches or branches to LR or CTR + in the last word of a page, with a target of the last cache + line in the next page), or if you have used some other + workaround. + + If in doubt, say Y here. + choice prompt "Microcode patch selection" default NO_UCODE_PATCH diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile index 5e2dae3afd2..76a81c3350a 100644 --- a/arch/powerpc/platforms/8xx/Makefile +++ b/arch/powerpc/platforms/8xx/Makefile @@ -4,3 +4,6 @@ obj-$(CONFIG_PPC_8xx) += m8xx_setup.o obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o +obj-$(CONFIG_PPC_EP88XC) += ep88xc.o +obj-$(CONFIG_PPC_ADDER875) += adder875.o +obj-$(CONFIG_TQM8XX) += tqm8xx_setup.o diff --git a/arch/powerpc/platforms/8xx/adder875.c b/arch/powerpc/platforms/8xx/adder875.c new file mode 100644 index 00000000000..82363e98f50 --- /dev/null +++ b/arch/powerpc/platforms/8xx/adder875.c @@ -0,0 +1,118 @@ +/* Analogue & Micro Adder MPC875 board support + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/fs_enet_pd.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/cpm1.h> +#include <asm/fs_pd.h> +#include <asm/udbg.h> +#include <asm/prom.h> + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static __initdata struct cpm_pin adder875_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* MII1 */ + {CPM_PORTA, 0, CPM_PIN_INPUT}, + {CPM_PORTA, 1, CPM_PIN_INPUT}, + {CPM_PORTA, 2, CPM_PIN_INPUT}, + {CPM_PORTA, 3, CPM_PIN_INPUT}, + {CPM_PORTA, 4, CPM_PIN_OUTPUT}, + {CPM_PORTA, 10, CPM_PIN_OUTPUT}, + {CPM_PORTA, 11, CPM_PIN_OUTPUT}, + {CPM_PORTB, 19, CPM_PIN_INPUT}, + {CPM_PORTB, 31, CPM_PIN_INPUT}, + {CPM_PORTC, 12, CPM_PIN_INPUT}, + {CPM_PORTC, 13, CPM_PIN_INPUT}, + {CPM_PORTE, 30, CPM_PIN_OUTPUT}, + {CPM_PORTE, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ + {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 16, CPM_PIN_OUTPUT}, + {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 21, CPM_PIN_OUTPUT}, + {CPM_PORTE, 22, CPM_PIN_OUTPUT}, + {CPM_PORTE, 23, CPM_PIN_OUTPUT}, + {CPM_PORTE, 24, CPM_PIN_OUTPUT}, + {CPM_PORTE, 25, CPM_PIN_OUTPUT}, + {CPM_PORTE, 26, CPM_PIN_OUTPUT}, + {CPM_PORTE, 27, CPM_PIN_OUTPUT}, + {CPM_PORTE, 28, CPM_PIN_OUTPUT}, + {CPM_PORTE, 29, CPM_PIN_OUTPUT}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adder875_pins); i++) { + const struct cpm_pin *pin = &adder875_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); +} + +static void __init adder875_setup(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init adder875_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + return of_flat_dt_is_compatible(root, "analogue-and-micro,adder875"); +} + +static __initdata struct of_device_id of_bus_ids[] = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(adder875, declare_of_platform_devices); + +define_machine(adder875) { + .name = "Adder MPC875", + .probe = adder875_probe, + .setup_arch = adder875_setup, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = generic_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/ep88xc.c b/arch/powerpc/platforms/8xx/ep88xc.c new file mode 100644 index 00000000000..e62166681d0 --- /dev/null +++ b/arch/powerpc/platforms/8xx/ep88xc.c @@ -0,0 +1,177 @@ +/* + * Platform setup for the Embedded Planet EP88xC board + * + * Author: Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/udbg.h> +#include <asm/cpm1.h> + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin ep88xc_pins[] = { + /* SMC1 */ + {1, 24, CPM_PIN_INPUT}, /* RX */ + {1, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC2 */ + {0, 12, CPM_PIN_INPUT}, /* TX */ + {0, 13, CPM_PIN_INPUT}, /* RX */ + {2, 8, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CD */ + {2, 9, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CTS */ + {2, 14, CPM_PIN_INPUT}, /* RTS */ + + /* MII1 */ + {0, 0, CPM_PIN_INPUT}, + {0, 1, CPM_PIN_INPUT}, + {0, 2, CPM_PIN_INPUT}, + {0, 3, CPM_PIN_INPUT}, + {0, 4, CPM_PIN_OUTPUT}, + {0, 10, CPM_PIN_OUTPUT}, + {0, 11, CPM_PIN_OUTPUT}, + {1, 19, CPM_PIN_INPUT}, + {1, 31, CPM_PIN_INPUT}, + {2, 12, CPM_PIN_INPUT}, + {2, 13, CPM_PIN_INPUT}, + {3, 8, CPM_PIN_INPUT}, + {4, 30, CPM_PIN_OUTPUT}, + {4, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ + {4, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 16, CPM_PIN_OUTPUT}, + {4, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 21, CPM_PIN_OUTPUT}, + {4, 22, CPM_PIN_OUTPUT}, + {4, 23, CPM_PIN_OUTPUT}, + {4, 24, CPM_PIN_OUTPUT}, + {4, 25, CPM_PIN_OUTPUT}, + {4, 26, CPM_PIN_OUTPUT}, + {4, 27, CPM_PIN_OUTPUT}, + {4, 28, CPM_PIN_OUTPUT}, + {4, 29, CPM_PIN_OUTPUT}, + + /* USB */ + {0, 6, CPM_PIN_INPUT}, /* CLK2 */ + {0, 14, CPM_PIN_INPUT}, /* USBOE */ + {0, 15, CPM_PIN_INPUT}, /* USBRXD */ + {2, 6, CPM_PIN_OUTPUT}, /* USBTXN */ + {2, 7, CPM_PIN_OUTPUT}, /* USBTXP */ + {2, 10, CPM_PIN_INPUT}, /* USBRXN */ + {2, 11, CPM_PIN_INPUT}, /* USBRXP */ + + /* Misc */ + {1, 26, CPM_PIN_INPUT}, /* BRGO2 */ + {1, 27, CPM_PIN_INPUT}, /* BRGO1 */ +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ep88xc_pins); i++) { + struct cpm_pin *pin = &ep88xc_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_TX); /* USB */ + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX); + cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); + cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); +} + +static u8 __iomem *ep88xc_bcsr; + +#define BCSR7_SCC2_ENABLE 0x10 + +#define BCSR8_PHY1_ENABLE 0x80 +#define BCSR8_PHY1_POWER 0x40 +#define BCSR8_PHY2_ENABLE 0x20 +#define BCSR8_PHY2_POWER 0x10 + +#define BCSR9_USB_ENABLE 0x80 +#define BCSR9_USB_POWER 0x40 +#define BCSR9_USB_HOST 0x20 +#define BCSR9_USB_FULL_SPEED_TARGET 0x10 + +static void __init ep88xc_setup_arch(void) +{ + struct device_node *np; + + cpm_reset(); + init_ioports(); + + np = of_find_compatible_node(NULL, NULL, "fsl,ep88xc-bcsr"); + if (!np) { + printk(KERN_CRIT "Could not find fsl,ep88xc-bcsr node\n"); + return; + } + + ep88xc_bcsr = of_iomap(np, 0); + of_node_put(np); + + if (!ep88xc_bcsr) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + setbits8(&ep88xc_bcsr[7], BCSR7_SCC2_ENABLE); + setbits8(&ep88xc_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER | + BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER); +} + +static int __init ep88xc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + return of_flat_dt_is_compatible(root, "fsl,ep88xc"); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ep88xc, declare_of_platform_devices); + +define_machine(ep88xc) { + .name = "Embedded Planet EP88xC", + .probe = ep88xc_probe, + .setup_arch = ep88xc_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index 0901dbada35..587a2828b06 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -10,52 +10,31 @@ * bootup setup stuff.. */ -#include <linux/errno.h> -#include <linux/sched.h> #include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/tty.h> -#include <linux/major.h> #include <linux/interrupt.h> -#include <linux/reboot.h> #include <linux/init.h> -#include <linux/initrd.h> -#include <linux/ioport.h> -#include <linux/bootmem.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> #include <linux/time.h> #include <linux/rtc.h> +#include <linux/fsl_devices.h> -#include <asm/mmu.h> -#include <asm/reg.h> -#include <asm/residual.h> #include <asm/io.h> -#include <asm/pgtable.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> -#include <asm/machdep.h> -#include <asm/bootinfo.h> -#include <asm/time.h> #include <asm/prom.h> #include <asm/fs_pd.h> #include <mm/mmu_decl.h> -#include "sysdev/mpc8xx_pic.h" +#include <sysdev/mpc8xx_pic.h> + +#include "mpc8xx.h" + +struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops; -void m8xx_calibrate_decr(void); -extern void m8xx_wdt_handler_install(bd_t *bp); extern int cpm_pic_init(void); extern int cpm_get_irq(void); /* A place holder for time base interrupts, if they are ever enabled. */ -irqreturn_t timebase_interrupt(int irq, void * dev) +static irqreturn_t timebase_interrupt(int irq, void *dev) { printk ("timebase_interrupt()\n"); @@ -64,7 +43,7 @@ irqreturn_t timebase_interrupt(int irq, void * dev) static struct irqaction tbint_irqaction = { .handler = timebase_interrupt, - .mask = CPU_MASK_NONE, + .flags = IRQF_NO_THREAD, .name = "tbint", }; @@ -72,7 +51,7 @@ static struct irqaction tbint_irqaction = { void __init __attribute__ ((weak)) init_internal_rtc(void) { - sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit); + sit8xx_t __iomem *sys_tmr = immr_map(im_sit); /* Disable the RTC one second and alarm interrupts. */ clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE)); @@ -84,24 +63,24 @@ init_internal_rtc(void) static int __init get_freq(char *name, unsigned long *val) { - struct device_node *cpu; - const unsigned int *fp; - int found = 0; + struct device_node *cpu; + const unsigned int *fp; + int found = 0; - /* The cpu node should have timebase and clock frequency properties */ - cpu = of_find_node_by_type(NULL, "cpu"); + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu) { - fp = of_get_property(cpu, name, NULL); - if (fp) { - found = 1; - *val = *fp; - } + if (cpu) { + fp = of_get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp; + } - of_node_put(cpu); - } + of_node_put(cpu); + } - return found; + return found; } /* The decrementer counts at the system (internal) clock frequency divided by @@ -111,13 +90,13 @@ static int __init get_freq(char *name, unsigned long *val) void __init mpc8xx_calibrate_decr(void) { struct device_node *cpu; - cark8xx_t *clk_r1; - car8xx_t *clk_r2; - sitk8xx_t *sys_tmr1; - sit8xx_t *sys_tmr2; + cark8xx_t __iomem *clk_r1; + car8xx_t __iomem *clk_r2; + sitk8xx_t __iomem *sys_tmr1; + sit8xx_t __iomem *sys_tmr2; int irq, virq; - clk_r1 = (cark8xx_t *) immr_map(im_clkrstk); + clk_r1 = immr_map(im_clkrstk); /* Unlock the SCCR. */ out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY); @@ -125,24 +104,19 @@ void __init mpc8xx_calibrate_decr(void) immr_unmap(clk_r1); /* Force all 8xx processors to use divide by 16 processor clock. */ - clk_r2 = (car8xx_t *) immr_map(im_clkrst); + clk_r2 = immr_map(im_clkrst); setbits32(&clk_r2->car_sccr, 0x02000000); immr_unmap(clk_r2); /* Processor frequency is MHz. */ - ppc_tb_freq = 50000000; - if (!get_freq("bus-frequency", &ppc_tb_freq)) { - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - } - ppc_tb_freq /= 16; - ppc_proc_freq = 50000000; - if (!get_freq("clock-frequency", &ppc_proc_freq)) - printk(KERN_ERR "WARNING: Estimating processor frequency" - "(not found)\n"); - - printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); + ppc_proc_freq = 50000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency " + "(not found)\n"); + + ppc_tb_freq = ppc_proc_freq / 16; + printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); /* Perform some more timer/timebase initialization. This used * to be done elsewhere, but other changes caused it to get @@ -159,7 +133,7 @@ void __init mpc8xx_calibrate_decr(void) * we guarantee the registers are locked, then we unlock them * for our use. */ - sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + sys_tmr1 = immr_map(im_sitk); out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY); out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY); out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY); @@ -175,24 +149,17 @@ void __init mpc8xx_calibrate_decr(void) * we have to enable the timebase). The decrementer interrupt * is wired into the vector table, nothing to do here for that. */ - cpu = of_find_node_by_type(NULL, "cpu"); - virq= irq_of_parse_and_map(cpu, 0); - irq = irq_map[virq].hwirq; + cpu = of_find_node_by_type(NULL, "cpu"); + virq= irq_of_parse_and_map(cpu, 0); + irq = virq_to_hw(virq); - sys_tmr2 = (sit8xx_t *) immr_map(im_sit); + sys_tmr2 = immr_map(im_sit); out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) | (TBSCR_TBF | TBSCR_TBE)); immr_unmap(sys_tmr2); if (setup_irq(virq, &tbint_irqaction)) panic("Could not allocate timer IRQ!"); - -#ifdef CONFIG_8xx_WDT - /* Install watchdog timer handler early because it might be - * already enabled by the bootloader - */ - m8xx_wdt_handler_install(binfo); -#endif } /* The RTC on the MPC8xx is an internal register. @@ -202,14 +169,14 @@ void __init mpc8xx_calibrate_decr(void) int mpc8xx_set_rtc_time(struct rtc_time *tm) { - sitk8xx_t *sys_tmr1; - sit8xx_t *sys_tmr2; + sitk8xx_t __iomem *sys_tmr1; + sit8xx_t __iomem *sys_tmr2; int time; - sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); - sys_tmr2 = (sit8xx_t *) immr_map(im_sit); + sys_tmr1 = immr_map(im_sitk); + sys_tmr2 = immr_map(im_sit); time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, - tm->tm_hour, tm->tm_min, tm->tm_sec); + tm->tm_hour, tm->tm_min, tm->tm_sec); out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY); out_be32(&sys_tmr2->sit_rtc, time); @@ -223,21 +190,20 @@ int mpc8xx_set_rtc_time(struct rtc_time *tm) void mpc8xx_get_rtc_time(struct rtc_time *tm) { unsigned long data; - sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit); + sit8xx_t __iomem *sys_tmr = immr_map(im_sit); /* Get time from the RTC. */ data = in_be32(&sys_tmr->sit_rtc); to_tm(data, tm); - tm->tm_year -= 1900; - tm->tm_mon -= 1; + tm->tm_year -= 1900; + tm->tm_mon -= 1; immr_unmap(sys_tmr); return; } void mpc8xx_restart(char *cmd) { - __volatile__ unsigned char dummy; - car8xx_t * clk_r = (car8xx_t *) immr_map(im_clkrst); + car8xx_t __iomem *clk_r = immr_map(im_clkrst); local_irq_disable(); @@ -247,57 +213,37 @@ void mpc8xx_restart(char *cmd) */ mtmsr(mfmsr() & ~0x1000); - dummy = in_8(&clk_r->res[0]); - printk("Restart failed\n"); - while(1); -} - -void mpc8xx_show_cpuinfo(struct seq_file *m) -{ - struct device_node *root; - uint memsize = total_memory; - const char *model = ""; - - seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); - - root = of_find_node_by_path("/"); - if (root) - model = of_get_property(root, "model", NULL); - seq_printf(m, "Machine\t\t: %s\n", model); - of_node_put(root); - - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); + in_8(&clk_r->res[0]); + panic("Restart failed\n"); } static void cpm_cascade(unsigned int irq, struct irq_desc *desc) { - int cascade_irq; - - if ((cascade_irq = cpm_get_irq()) >= 0) { - struct irq_desc *cdesc = irq_desc + cascade_irq; + struct irq_chip *chip = irq_desc_get_chip(desc); + int cascade_irq = cpm_get_irq(); + if (cascade_irq >= 0) generic_handle_irq(cascade_irq); - cdesc->chip->eoi(cascade_irq); - } - desc->chip->eoi(irq); + + chip->irq_eoi(&desc->irq_data); } -/* Initialize the internal interrupt controller. The number of +/* Initialize the internal interrupt controllers. The number of * interrupts supported can vary with the processor type, and the * 82xx family can have up to 64. * External interrupts can be either edge or level triggered, and * need to be initialized by the appropriate driver. */ -void __init m8xx_pic_init(void) +void __init mpc8xx_pics_init(void) { int irq; if (mpc8xx_pic_init()) { - printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); + printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); return; } irq = cpm_pic_init(); if (irq != NO_IRQ) - set_irq_chained_handler(irq, cpm_cascade); + irq_set_chained_handler(irq, cpm_cascade); } diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h index 59bad2f9ae5..17b1fe75e0b 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads.h +++ b/arch/powerpc/platforms/8xx/mpc86xads.h @@ -15,31 +15,6 @@ #ifndef __ASM_MPC86XADS_H__ #define __ASM_MPC86XADS_H__ -#include <asm/ppcboot.h> -#include <sysdev/fsl_soc.h> - -/* U-Boot maps BCSR to 0xff080000 */ -#define BCSR_ADDR ((uint)0xff080000) -#define BCSR_SIZE ((uint)32) -#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) -#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) -#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) -#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) -#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) - -#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) -#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) - -#define IMAP_ADDR (get_immrbase()) -#define IMAP_SIZE ((uint)(64 * 1024)) - -#define MPC8xx_CPM_OFFSET (0x9c0) -#define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET) -#define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver - -#define PCMCIA_MEM_ADDR ((uint)0xff020000) -#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) - /* Bits of interest in the BCSRs. */ #define BCSR1_ETHEN ((uint)0x20000000) @@ -68,28 +43,5 @@ #define BCSR5_MII1_EN 0x02 #define BCSR5_MII1_RST 0x01 -/* Interrupt level assignments */ -#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ -#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ -#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ - -/* We don't use the 8259 */ -#define NR_8259_INTS 0 - -/* CPM Ethernet through SCC1 */ -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0100) -#define PA_ENET_RCLK ((ushort)0x0200) -#define PB_ENET_TENA ((uint)0x00001000) -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000002c) - #endif /* __ASM_MPC86XADS_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c index a35315af5c5..63084640c5c 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -1,4 +1,4 @@ -/*arch/ppc/platforms/mpc86xads-setup.c +/*arch/powerpc/platforms/8xx/mpc86xads_setup.c * * Platform setup for the Freescale mpc86xads board * @@ -6,296 +6,146 @@ * * Copyright 2005 MontaVista Software Inc. * + * Heavily modified by Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ #include <linux/init.h> -#include <linux/module.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/root_dev.h> - -#include <linux/fs_enet_pd.h> -#include <linux/fs_uart_pd.h> -#include <linux/mii.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> -#include <asm/delay.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/page.h> -#include <asm/processor.h> -#include <asm/system.h> #include <asm/time.h> -#include <asm/ppcboot.h> -#include <asm/mpc8xx.h> #include <asm/8xx_immap.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> #include <asm/fs_pd.h> -#include <asm/prom.h> +#include <asm/udbg.h> -extern void cpm_reset(void); -extern void mpc8xx_show_cpuinfo(struct seq_file*); -extern void mpc8xx_restart(char *cmd); -extern void mpc8xx_calibrate_decr(void); -extern int mpc8xx_set_rtc_time(struct rtc_time *tm); -extern void mpc8xx_get_rtc_time(struct rtc_time *tm); -extern void m8xx_pic_init(void); -extern unsigned int mpc8xx_get_irq(void); +#include "mpc86xads.h" +#include "mpc8xx.h" -static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi); -static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi); -static void init_scc1_ioports(struct fs_platform_info* ptr); +struct cpm_pin { + int port, pin, flags; +}; -void __init mpc86xads_board_setup(void) -{ - cpm8xx_t *cp; - unsigned int *bcsr_io; - u8 tmpval8; +static struct cpm_pin mpc866ads_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SMC2 */ + {CPM_PORTB, 21, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC1 */ + {CPM_PORTA, 6, CPM_PIN_INPUT}, /* CLK1 */ + {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */ + {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 19, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */ + {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */ + + /* MII */ + {CPM_PORTD, 3, CPM_PIN_OUTPUT}, + {CPM_PORTD, 4, CPM_PIN_OUTPUT}, + {CPM_PORTD, 5, CPM_PIN_OUTPUT}, + {CPM_PORTD, 6, CPM_PIN_OUTPUT}, + {CPM_PORTD, 7, CPM_PIN_OUTPUT}, + {CPM_PORTD, 8, CPM_PIN_OUTPUT}, + {CPM_PORTD, 9, CPM_PIN_OUTPUT}, + {CPM_PORTD, 10, CPM_PIN_OUTPUT}, + {CPM_PORTD, 11, CPM_PIN_OUTPUT}, + {CPM_PORTD, 12, CPM_PIN_OUTPUT}, + {CPM_PORTD, 13, CPM_PIN_OUTPUT}, + {CPM_PORTD, 14, CPM_PIN_OUTPUT}, + {CPM_PORTD, 15, CPM_PIN_OUTPUT}, + + /* I2C */ + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, +}; - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - cp = (cpm8xx_t *)immr_map(im_cpm); +static void __init init_ioports(void) +{ + int i; - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR\n"); - return; + for (i = 0; i < ARRAY_SIZE(mpc866ads_pins); i++) { + struct cpm_pin *pin = &mpc866ads_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); } -#ifdef CONFIG_SERIAL_CPM_SMC1 - clrbits32(bcsr_io, BCSR1_RS232EN_1); - clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1 */ - tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX); - out_8(&(cp->cp_smc[0].smc_smcm), tmpval8); - clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); -#else - setbits32(bcsr_io,BCSR1_RS232EN_1); - out_be16(&cp->cp_smc[0].smc_smcmr, 0); - out_8(&cp->cp_smc[0].smc_smce, 0); -#endif -#ifdef CONFIG_SERIAL_CPM_SMC2 - clrbits32(bcsr_io,BCSR1_RS232EN_2); - clrbits32(&cp->cp_simode, 0xe0000000 >> 1); - setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */ - tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX); - out_8(&(cp->cp_smc[1].smc_smcm), tmpval8); - clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN); + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK1, CPM_CLK_TX); + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX); - init_smc2_uart_ioports(0); -#else - setbits32(bcsr_io,BCSR1_RS232EN_2); - out_be16(&cp->cp_smc[1].smc_smcmr, 0); - out_8(&cp->cp_smc[1].smc_smce, 0); -#endif - immr_unmap(cp); - iounmap(bcsr_io); + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); } - -static void init_fec1_ioports(struct fs_platform_info* ptr) +static void __init mpc86xads_setup_arch(void) { - iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport); - - /* configure FEC1 pins */ + struct device_node *np; + u32 __iomem *bcsr_io; - setbits16(&io_port->iop_pdpar, 0x1fff); - setbits16(&io_port->iop_pddir, 0x1fff); - - immr_unmap(io_port); -} - -void init_fec_ioports(struct fs_platform_info *fpi) -{ - int fec_no = fs_get_fec_index(fpi->fs_no); + cpm_reset(); + init_ioports(); - switch (fec_no) { - case 0: - init_fec1_ioports(fpi); - break; - default: - printk(KERN_ERR "init_fec_ioports: invalid FEC number\n"); + np = of_find_compatible_node(NULL, NULL, "fsl,mpc866ads-bcsr"); + if (!np) { + printk(KERN_CRIT "Could not find fsl,mpc866ads-bcsr node\n"); return; } -} - -static void init_scc1_ioports(struct fs_platform_info* fpi) -{ - unsigned *bcsr_io; - iop8xx_t *io_port; - cpm8xx_t *cp; - bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); - io_port = (iop8xx_t *)immr_map(im_ioport); - cp = (cpm8xx_t *)immr_map(im_cpm); + bcsr_io = of_iomap(np, 0); + of_node_put(np); if (bcsr_io == NULL) { printk(KERN_CRIT "Could not remap BCSR\n"); return; } - /* Configure port A pins for Txd and Rxd. - */ - setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD); - clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD); - clrbits16(&io_port->iop_paodr, PA_ENET_TXD); - - /* Configure port C pins to enable CLSN and RENA. - */ - clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); - clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); - setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); - - /* Configure port A for TCLK and RCLK. - */ - setbits16(&io_port->iop_papar, PA_ENET_TCLK | PA_ENET_RCLK); - clrbits16(&io_port->iop_padir, PA_ENET_TCLK | PA_ENET_RCLK); - clrbits32(&cp->cp_pbpar, PB_ENET_TENA); - clrbits32(&cp->cp_pbdir, PB_ENET_TENA); - - /* Configure Serial Interface clock routing. - * First, clear all SCC bits to zero, then set the ones we want. - */ - clrbits32(&cp->cp_sicr, SICR_ENET_MASK); - setbits32(&cp->cp_sicr, SICR_ENET_CLKRT); - - /* In the original SCC enet driver the following code is placed at - the end of the initialization */ - setbits32(&cp->cp_pbpar, PB_ENET_TENA); - setbits32(&cp->cp_pbdir, PB_ENET_TENA); - - clrbits32(bcsr_io+1, BCSR1_ETHEN); + clrbits32(bcsr_io, BCSR1_RS232EN_1 | BCSR1_RS232EN_2 | BCSR1_ETHEN); iounmap(bcsr_io); - immr_unmap(cp); - immr_unmap(io_port); -} - -void init_scc_ioports(struct fs_platform_info *fpi) -{ - int scc_no = fs_get_scc_index(fpi->fs_no); - - switch (scc_no) { - case 0: - init_scc1_ioports(fpi); - break; - default: - printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); - return; - } } - - -static void init_smc1_uart_ioports(struct fs_uart_platform_info* ptr) +static int __init mpc86xads_probe(void) { - unsigned *bcsr_io; - cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); - - setbits32(&cp->cp_pbpar, 0x000000c0); - clrbits32(&cp->cp_pbdir, 0x000000c0); - clrbits16(&cp->cp_pbodr, 0x00c0); - immr_unmap(cp); - - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_1); - iounmap(bcsr_io); + unsigned long root = of_get_flat_dt_root(); + return of_flat_dt_is_compatible(root, "fsl,mpc866ads"); } -static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi) -{ - unsigned *bcsr_io; - cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); - - setbits32(&cp->cp_pbpar, 0x00000c00); - clrbits32(&cp->cp_pbdir, 0x00000c00); - clrbits16(&cp->cp_pbodr, 0x0c00); - immr_unmap(cp); - - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_2); - iounmap(bcsr_io); -} +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; -void init_smc_ioports(struct fs_uart_platform_info *data) +static int __init declare_of_platform_devices(void) { - int smc_no = fs_uart_id_fsid2smc(data->fs_no); - - switch (smc_no) { - case 0: - init_smc1_uart_ioports(data); - data->brg = data->clk_rx; - break; - case 1: - init_smc2_uart_ioports(data); - data->brg = data->clk_rx; - break; - default: - printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); - return; - } -} + of_platform_bus_probe(NULL, of_bus_ids, NULL); -int platform_device_skip(const char *model, int id) -{ return 0; } - -static void __init mpc86xads_setup_arch(void) -{ - struct device_node *cpu; - - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu != 0) { - const unsigned int *fp; - - fp = of_get_property(cpu, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(cpu); - } - - cpm_reset(); - - mpc86xads_board_setup(); - - ROOT_DEV = Root_NFS; -} - -static int __init mpc86xads_probe(void) -{ - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - if (model == NULL) - return 0; - if (strcmp(model, "MPC866ADS")) - return 0; - - return 1; -} +machine_device_initcall(mpc86x_ads, declare_of_platform_devices); define_machine(mpc86x_ads) { .name = "MPC86x ADS", .probe = mpc86xads_probe, .setup_arch = mpc86xads_setup_arch, - .init_IRQ = m8xx_pic_init, - .show_cpuinfo = mpc8xx_show_cpuinfo, + .init_IRQ = mpc8xx_pics_init, .get_irq = mpc8xx_get_irq, .restart = mpc8xx_restart, .calibrate_decr = mpc8xx_calibrate_decr, .set_rtc_time = mpc8xx_set_rtc_time, .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, }; diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h index 7c31aec284c..19412f76fa3 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads.h +++ b/arch/powerpc/platforms/8xx/mpc885ads.h @@ -15,31 +15,8 @@ #ifndef __ASM_MPC885ADS_H__ #define __ASM_MPC885ADS_H__ -#include <asm/ppcboot.h> #include <sysdev/fsl_soc.h> -/* U-Boot maps BCSR to 0xff080000 */ -#define BCSR_ADDR ((uint)0xff080000) -#define BCSR_SIZE ((uint)32) -#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) -#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) -#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) -#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) -#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) - -#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) -#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) - -#define IMAP_ADDR (get_immrbase()) -#define IMAP_SIZE ((uint)(64 * 1024)) - -#define MPC8xx_CPM_OFFSET (0x9c0) -#define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET) -#define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver - -#define PCMCIA_MEM_ADDR ((uint)0xff020000) -#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) - /* Bits of interest in the BCSRs. */ #define BCSR1_ETHEN ((uint)0x20000000) @@ -68,28 +45,5 @@ #define BCSR5_MII1_EN 0x02 #define BCSR5_MII1_RST 0x01 -/* Interrupt level assignments */ -#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ -#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ -#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */ -#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ - -/* We don't use the 8259 */ -#define NR_8259_INTS 0 - -/* CPM Ethernet through SCC3 */ -#define PA_ENET_RXD ((ushort)0x0040) -#define PA_ENET_TXD ((ushort)0x0080) -#define PE_ENET_TCLK ((uint)0x00004000) -#define PE_ENET_RCLK ((uint)0x00008000) -#define PE_ENET_TENA ((uint)0x00000010) -#define PC_ENET_CLSN ((ushort)0x0400) -#define PC_ENET_RENA ((ushort)0x0800) - -/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to - * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */ -#define SICR_ENET_MASK ((uint)0x00ff0000) -#define SICR_ENET_CLKRT ((uint)0x002c0000) - #endif /* __ASM_MPC885ADS_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index a57b57785ac..c1262581b63 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -1,11 +1,13 @@ -/*arch/ppc/platforms/mpc885ads-setup.c - * +/* * Platform setup for the Freescale mpc885ads board * * Vitaly Bordug <vbordug@ru.mvista.com> * * Copyright 2005 MontaVista Software Inc. * + * Heavily modified by Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. @@ -18,370 +20,270 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/delay.h> -#include <linux/root_dev.h> #include <linux/fs_enet_pd.h> #include <linux/fs_uart_pd.h> +#include <linux/fsl_devices.h> #include <linux/mii.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> #include <asm/delay.h> #include <asm/io.h> #include <asm/machdep.h> #include <asm/page.h> #include <asm/processor.h> -#include <asm/system.h> #include <asm/time.h> -#include <asm/ppcboot.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> #include <asm/fs_pd.h> -#include <asm/prom.h> - -extern void cpm_reset(void); -extern void mpc8xx_show_cpuinfo(struct seq_file*); -extern void mpc8xx_restart(char *cmd); -extern void mpc8xx_calibrate_decr(void); -extern int mpc8xx_set_rtc_time(struct rtc_time *tm); -extern void mpc8xx_get_rtc_time(struct rtc_time *tm); -extern void m8xx_pic_init(void); -extern unsigned int mpc8xx_get_irq(void); - -static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi); -static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi); -static void init_scc3_ioports(struct fs_platform_info* ptr); - -void __init mpc885ads_board_setup(void) -{ - cpm8xx_t *cp; - unsigned int *bcsr_io; - u8 tmpval8; - -#ifdef CONFIG_FS_ENET - iop8xx_t *io_port; -#endif - - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - cp = (cpm8xx_t *)immr_map(im_cpm); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR\n"); - return; - } -#ifdef CONFIG_SERIAL_CPM_SMC1 - clrbits32(bcsr_io, BCSR1_RS232EN_1); - clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1 */ - tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX); - out_8(&(cp->cp_smc[0].smc_smcm), tmpval8); - clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); /* brg1 */ -#else - setbits32(bcsr_io,BCSR1_RS232EN_1); - out_be16(&cp->cp_smc[0].smc_smcmr, 0); - out_8(&cp->cp_smc[0].smc_smce, 0); -#endif - -#ifdef CONFIG_SERIAL_CPM_SMC2 - clrbits32(bcsr_io,BCSR1_RS232EN_2); - clrbits32(&cp->cp_simode, 0xe0000000 >> 1); - setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */ - tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX); - out_8(&(cp->cp_smc[1].smc_smcm), tmpval8); - clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN); - - init_smc2_uart_ioports(0); -#else - setbits32(bcsr_io,BCSR1_RS232EN_2); - out_be16(&cp->cp_smc[1].smc_smcmr, 0); - out_8(&cp->cp_smc[1].smc_smce, 0); -#endif - immr_unmap(cp); - iounmap(bcsr_io); - -#ifdef CONFIG_FS_ENET - /* use MDC for MII (common) */ - io_port = (iop8xx_t*)immr_map(im_ioport); - setbits16(&io_port->iop_pdpar, 0x0080); - clrbits16(&io_port->iop_pddir, 0x0080); - - bcsr_io = ioremap(BCSR5, sizeof(unsigned long)); - clrbits32(bcsr_io,BCSR5_MII1_EN); - clrbits32(bcsr_io,BCSR5_MII1_RST); -#ifndef CONFIG_FC_ENET_HAS_SCC - clrbits32(bcsr_io,BCSR5_MII2_EN); - clrbits32(bcsr_io,BCSR5_MII2_RST); +#include <asm/udbg.h> -#endif - iounmap(bcsr_io); - immr_unmap(io_port); - -#endif -} +#include "mpc885ads.h" +#include "mpc8xx.h" +static u32 __iomem *bcsr, *bcsr5; -static void init_fec1_ioports(struct fs_platform_info* ptr) +#ifdef CONFIG_PCMCIA_M8XX +static void pcmcia_hw_setup(int slot, int enable) { - cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); - iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport); - - /* configure FEC1 pins */ - setbits16(&io_port->iop_papar, 0xf830); - setbits16(&io_port->iop_padir, 0x0830); - clrbits16(&io_port->iop_padir, 0xf000); - - setbits32(&cp->cp_pbpar, 0x00001001); - clrbits32(&cp->cp_pbdir, 0x00001001); - - setbits16(&io_port->iop_pcpar, 0x000c); - clrbits16(&io_port->iop_pcdir, 0x000c); - - setbits32(&cp->cp_pepar, 0x00000003); - setbits32(&cp->cp_pedir, 0x00000003); - clrbits32(&cp->cp_peso, 0x00000003); - clrbits32(&cp->cp_cptr, 0x00000100); - - immr_unmap(io_port); - immr_unmap(cp); + if (enable) + clrbits32(&bcsr[1], BCSR1_PCCEN); + else + setbits32(&bcsr[1], BCSR1_PCCEN); } - -static void init_fec2_ioports(struct fs_platform_info* ptr) +static int pcmcia_set_voltage(int slot, int vcc, int vpp) { - cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); - iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport); - - /* configure FEC2 pins */ - setbits32(&cp->cp_pepar, 0x0003fffc); - setbits32(&cp->cp_pedir, 0x0003fffc); - clrbits32(&cp->cp_peso, 0x000087fc); - setbits32(&cp->cp_peso, 0x00037800); - clrbits32(&cp->cp_cptr, 0x00000080); - - immr_unmap(io_port); - immr_unmap(cp); -} + u32 reg = 0; -void init_fec_ioports(struct fs_platform_info *fpi) -{ - int fec_no = fs_get_fec_index(fpi->fs_no); - - switch (fec_no) { + switch (vcc) { case 0: - init_fec1_ioports(fpi); break; - case 1: - init_fec2_ioports(fpi); + case 33: + reg |= BCSR1_PCCVCC0; + break; + case 50: + reg |= BCSR1_PCCVCC1; break; default: - printk(KERN_ERR "init_fec_ioports: invalid FEC number\n"); - return; + return 1; } -} - -static void init_scc3_ioports(struct fs_platform_info* fpi) -{ - unsigned *bcsr_io; - iop8xx_t *io_port; - cpm8xx_t *cp; - bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); - io_port = (iop8xx_t *)immr_map(im_ioport); - cp = (cpm8xx_t *)immr_map(im_cpm); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR\n"); - return; + switch (vpp) { + case 0: + break; + case 33: + case 50: + if (vcc == vpp) + reg |= BCSR1_PCCVPP1; + else + return 1; + break; + case 120: + if ((vcc == 33) || (vcc == 50)) + reg |= BCSR1_PCCVPP0; + else + return 1; + default: + return 1; } - /* Enable the PHY. - */ - clrbits32(bcsr_io+4, BCSR4_ETH10_RST); - udelay(1000); - setbits32(bcsr_io+4, BCSR4_ETH10_RST); - /* Configure port A pins for Txd and Rxd. - */ - setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD); - clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD); + /* first, turn off all power */ + clrbits32(&bcsr[1], 0x00610000); - /* Configure port C pins to enable CLSN and RENA. - */ - clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); - clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); - setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); + /* enable new powersettings */ + setbits32(&bcsr[1], reg); - /* Configure port E for TCLK and RCLK. - */ - setbits32(&cp->cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK); - clrbits32(&cp->cp_pepar, PE_ENET_TENA); - clrbits32(&cp->cp_pedir, - PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA); - clrbits32(&cp->cp_peso, PE_ENET_TCLK | PE_ENET_RCLK); - setbits32(&cp->cp_peso, PE_ENET_TENA); - - /* Configure Serial Interface clock routing. - * First, clear all SCC bits to zero, then set the ones we want. - */ - clrbits32(&cp->cp_sicr, SICR_ENET_MASK); - setbits32(&cp->cp_sicr, SICR_ENET_CLKRT); + return 0; +} +#endif - /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used. - */ - clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); - /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode - * by H/W setting after reset. SCC ethernet controller support only half duplex. - * This discrepancy of modes causes a lot of carrier lost errors. - */ +struct cpm_pin { + int port, pin, flags; +}; - /* In the original SCC enet driver the following code is placed at - the end of the initialization */ - setbits32(&cp->cp_pepar, PE_ENET_TENA); - clrbits32(&cp->cp_pedir, PE_ENET_TENA); - setbits32(&cp->cp_peso, PE_ENET_TENA); +static struct cpm_pin mpc885ads_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ - setbits32(bcsr_io+4, BCSR1_ETHEN); - iounmap(bcsr_io); - immr_unmap(io_port); - immr_unmap(cp); -} + /* SMC2 */ +#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2 + {CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ +#endif + + /* SCC3 */ + {CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */ + {CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */ + {CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */ + {CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */ + + /* MII1 */ + {CPM_PORTA, 0, CPM_PIN_INPUT}, + {CPM_PORTA, 1, CPM_PIN_INPUT}, + {CPM_PORTA, 2, CPM_PIN_INPUT}, + {CPM_PORTA, 3, CPM_PIN_INPUT}, + {CPM_PORTA, 4, CPM_PIN_OUTPUT}, + {CPM_PORTA, 10, CPM_PIN_OUTPUT}, + {CPM_PORTA, 11, CPM_PIN_OUTPUT}, + {CPM_PORTB, 19, CPM_PIN_INPUT}, + {CPM_PORTB, 31, CPM_PIN_INPUT}, + {CPM_PORTC, 12, CPM_PIN_INPUT}, + {CPM_PORTC, 13, CPM_PIN_INPUT}, + {CPM_PORTE, 30, CPM_PIN_OUTPUT}, + {CPM_PORTE, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 16, CPM_PIN_OUTPUT}, + {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 21, CPM_PIN_OUTPUT}, + {CPM_PORTE, 22, CPM_PIN_OUTPUT}, + {CPM_PORTE, 23, CPM_PIN_OUTPUT}, + {CPM_PORTE, 24, CPM_PIN_OUTPUT}, + {CPM_PORTE, 25, CPM_PIN_OUTPUT}, + {CPM_PORTE, 26, CPM_PIN_OUTPUT}, + {CPM_PORTE, 27, CPM_PIN_OUTPUT}, + {CPM_PORTE, 28, CPM_PIN_OUTPUT}, + {CPM_PORTE, 29, CPM_PIN_OUTPUT}, +#endif + /* I2C */ + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, +}; -void init_scc_ioports(struct fs_platform_info *fpi) +static void __init init_ioports(void) { - int scc_no = fs_get_scc_index(fpi->fs_no); + int i; - switch (scc_no) { - case 2: - init_scc3_ioports(fpi); - break; - default: - printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); - return; + for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) { + struct cpm_pin *pin = &mpc885ads_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); } -} + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX); + cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX); - -static void init_smc1_uart_ioports(struct fs_uart_platform_info* ptr) -{ - unsigned *bcsr_io; - cpm8xx_t *cp; - - cp = (cpm8xx_t *)immr_map(im_cpm); - setbits32(&cp->cp_pepar, 0x000000c0); - clrbits32(&cp->cp_pedir, 0x000000c0); - clrbits32(&cp->cp_peso, 0x00000040); - setbits32(&cp->cp_peso, 0x00000080); - immr_unmap(cp); - - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_1); - iounmap(bcsr_io); + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); } -static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi) +static void __init mpc885ads_setup_arch(void) { - unsigned *bcsr_io; - cpm8xx_t *cp; - - cp = (cpm8xx_t *)immr_map(im_cpm); - setbits32(&cp->cp_pepar, 0x00000c00); - clrbits32(&cp->cp_pedir, 0x00000c00); - clrbits32(&cp->cp_peso, 0x00000400); - setbits32(&cp->cp_peso, 0x00000800); - immr_unmap(cp); - - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_2); - iounmap(bcsr_io); -} + struct device_node *np; -void init_smc_ioports(struct fs_uart_platform_info *data) -{ - int smc_no = fs_uart_id_fsid2smc(data->fs_no); + cpm_reset(); + init_ioports(); - switch (smc_no) { - case 0: - init_smc1_uart_ioports(data); - data->brg = data->clk_rx; - break; - case 1: - init_smc2_uart_ioports(data); - data->brg = data->clk_rx; - break; - default: - printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); + np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr"); + if (!np) { + printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n"); return; } -} -int platform_device_skip(const char *model, int id) -{ -#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 - const char *dev = "FEC"; - int n = 2; + bcsr = of_iomap(np, 0); + bcsr5 = of_iomap(np, 1); + of_node_put(np); + + if (!bcsr || !bcsr5) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + clrbits32(&bcsr[1], BCSR1_RS232EN_1); +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + setbits32(&bcsr[1], BCSR1_RS232EN_2); #else - const char *dev = "SCC"; - int n = 3; + clrbits32(&bcsr[1], BCSR1_RS232EN_2); #endif - if (!strcmp(model, dev) && n == id) - return 1; + clrbits32(bcsr5, BCSR5_MII1_EN); + setbits32(bcsr5, BCSR5_MII1_RST); + udelay(1000); + clrbits32(bcsr5, BCSR5_MII1_RST); - return 0; -} +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + clrbits32(bcsr5, BCSR5_MII2_EN); + setbits32(bcsr5, BCSR5_MII2_RST); + udelay(1000); + clrbits32(bcsr5, BCSR5_MII2_RST); +#else + setbits32(bcsr5, BCSR5_MII2_EN); +#endif -static void __init mpc885ads_setup_arch(void) -{ - struct device_node *cpu; +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 + clrbits32(&bcsr[4], BCSR4_ETH10_RST); + udelay(1000); + setbits32(&bcsr[4], BCSR4_ETH10_RST); - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu != 0) { - const unsigned int *fp; + setbits32(&bcsr[1], BCSR1_ETHEN); - fp = of_get_property(cpu, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(cpu); - } + np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80"); +#else + np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40"); +#endif - cpm_reset(); + /* The SCC3 enet registers overlap the SMC1 registers, so + * one of the two must be removed from the device tree. + */ - mpc885ads_board_setup(); + if (np) { + of_detach_node(np); + of_node_put(np); + } - ROOT_DEV = Root_NFS; +#ifdef CONFIG_PCMCIA_M8XX + /* Set up board specific hook-ups.*/ + m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup; + m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage; +#endif } static int __init mpc885ads_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - if (model == NULL) - return 0; - if (strcmp(model, "MPC885ADS")) - return 0; - - return 1; + unsigned long root = of_get_flat_dt_root(); + return of_flat_dt_is_compatible(root, "fsl,mpc885ads"); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; } +machine_device_initcall(mpc885_ads, declare_of_platform_devices); define_machine(mpc885_ads) { - .name = "MPC885 ADS", + .name = "Freescale MPC885 ADS", .probe = mpc885ads_probe, .setup_arch = mpc885ads_setup_arch, - .init_IRQ = m8xx_pic_init, - .show_cpuinfo = mpc8xx_show_cpuinfo, + .init_IRQ = mpc8xx_pics_init, .get_irq = mpc8xx_get_irq, .restart = mpc8xx_restart, .calibrate_decr = mpc8xx_calibrate_decr, .set_rtc_time = mpc8xx_set_rtc_time, .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, }; diff --git a/arch/powerpc/platforms/8xx/mpc8xx.h b/arch/powerpc/platforms/8xx/mpc8xx.h new file mode 100644 index 00000000000..239a243a616 --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc8xx.h @@ -0,0 +1,21 @@ +/* + * Prototypes, etc. for the Freescale MPC8xx embedded cpu chips + * May need to be cleaned as the port goes on ... + * + * Copyright (C) 2008 Jochen Friedrich <jochen@scram.de> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __MPC8xx_H +#define __MPC8xx_H + +extern void mpc8xx_restart(char *cmd); +extern void mpc8xx_calibrate_decr(void); +extern int mpc8xx_set_rtc_time(struct rtc_time *tm); +extern void mpc8xx_get_rtc_time(struct rtc_time *tm); +extern void mpc8xx_pics_init(void); +extern unsigned int mpc8xx_get_irq(void); + +#endif /* __MPC8xx_H */ diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c new file mode 100644 index 00000000000..251aba8759e --- /dev/null +++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c @@ -0,0 +1,155 @@ +/* + * Platform setup for the MPC8xx based boards from TQM. + * + * Heiko Schocher <hs@denx.de> + * Copyright 2010 DENX Software Engineering GmbH + * + * based on: + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/delay.h> + +#include <linux/fs_enet_pd.h> +#include <linux/fs_uart_pd.h> +#include <linux/fsl_devices.h> +#include <linux/mii.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/time.h> +#include <asm/mpc8xx.h> +#include <asm/8xx_immap.h> +#include <asm/cpm1.h> +#include <asm/fs_pd.h> +#include <asm/udbg.h> + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin tqm8xx_pins[] __initdata = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC1 */ + {CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */ + {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */ + {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, + {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, +}; + +static struct cpm_pin tqm8xx_fec_pins[] __initdata = { + /* MII */ + {CPM_PORTD, 3, CPM_PIN_OUTPUT}, + {CPM_PORTD, 4, CPM_PIN_OUTPUT}, + {CPM_PORTD, 5, CPM_PIN_OUTPUT}, + {CPM_PORTD, 6, CPM_PIN_OUTPUT}, + {CPM_PORTD, 7, CPM_PIN_OUTPUT}, + {CPM_PORTD, 8, CPM_PIN_OUTPUT}, + {CPM_PORTD, 9, CPM_PIN_OUTPUT}, + {CPM_PORTD, 10, CPM_PIN_OUTPUT}, + {CPM_PORTD, 11, CPM_PIN_OUTPUT}, + {CPM_PORTD, 12, CPM_PIN_OUTPUT}, + {CPM_PORTD, 13, CPM_PIN_OUTPUT}, + {CPM_PORTD, 14, CPM_PIN_OUTPUT}, + {CPM_PORTD, 15, CPM_PIN_OUTPUT}, +}; + +static void __init init_pins(int n, struct cpm_pin *pin) +{ + int i; + + for (i = 0; i < n; i++) { + cpm1_set_pin(pin->port, pin->pin, pin->flags); + pin++; + } +} + +static void __init init_ioports(void) +{ + struct device_node *dnode; + struct property *prop; + int len; + + init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]); + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + dnode = of_find_node_by_name(NULL, "aliases"); + if (dnode == NULL) + return; + prop = of_find_property(dnode, "ethernet1", &len); + if (prop == NULL) + return; + + /* init FEC pins */ + init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]); +} + +static void __init tqm8xx_setup_arch(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init tqm8xx_probe(void) +{ + unsigned long node = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(node, "tqc,tqm8xx"); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + { .compatible = "simple-bus" }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(tqm8xx, declare_of_platform_devices); + +define_machine(tqm8xx) { + .name = "TQM8xx", + .probe = tqm8xx_probe, + .setup_arch = tqm8xx_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; |