diff options
Diffstat (limited to 'arch/powerpc/platforms/85xx')
39 files changed, 2548 insertions, 1485 deletions
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index d7946be298b..f442120e003 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -6,6 +6,7 @@ menuconfig FSL_SOC_BOOKE select MPIC select PPC_PCI_CHOICE select FSL_PCI if PCI + select SERIAL_8250_EXTENDED if SERIAL_8250 select SERIAL_8250_SHARE_IRQ if SERIAL_8250 default y @@ -13,6 +14,39 @@ if FSL_SOC_BOOKE if PPC32 +config FSL_85XX_CACHE_SRAM + bool + select PPC_LIB_RHEAP + help + When selected, this option enables cache-sram support + for memory allocation on P1/P2 QorIQ platforms. + cache-sram-size and cache-sram-offset kernel boot + parameters should be passed when this option is enabled. + +config BSC9131_RDB + bool "Freescale BSC9131RDB" + select DEFAULT_UIMAGE + help + This option enables support for the Freescale BSC9131RDB board. + The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a + StarCore SC3850 DSP + Manufacturer : Freescale Semiconductor, Inc + +config C293_PCIE + bool "Freescale C293PCIE" + select DEFAULT_UIMAGE + help + This option enables support for the C293PCIE board + +config BSC9132_QDS + bool "Freescale BSC9132QDS" + select DEFAULT_UIMAGE + help + This option enables support for the Freescale BSC9132 QDS board. + BSC9132 is a heterogeneous SoC containing dual e500v2 powerpc cores + and dual StarCore SC3850 DSP cores. + Manufacturer : Freescale Semiconductor, Inc + config MPC8540_ADS bool "Freescale MPC8540 ADS" select DEFAULT_UIMAGE @@ -30,6 +64,7 @@ config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE select PPC_I8259 + select HAS_RAPIDIO help This option enables support for the MPC85xx CDS board @@ -80,16 +115,28 @@ config P1010_RDB config P1022_DS bool "Freescale P1022 DS" select DEFAULT_UIMAGE - select PHYS_64BIT # The DTS has 36-bit addresses select SWIOTLB help This option enables support for the Freescale P1022DS reference board. -config P1023_RDS - bool "Freescale P1023 RDS" +config P1022_RDK + bool "Freescale / iVeia P1022 RDK" + select DEFAULT_UIMAGE + help + This option enables support for the Freescale / iVeia P1022RDK + reference board. + +config P1023_RDB + bool "Freescale P1023 RDB" select DEFAULT_UIMAGE help - This option enables support for the P1023 RDS board + This option enables support for the P1023 RDB board. + +config TWR_P102x + bool "Freescale TWR-P102x" + select DEFAULT_UIMAGE + help + This option enables support for the TWR-P1025 board. config SOCRATES bool "Socrates" @@ -165,67 +212,54 @@ config SBC8548 help This option enables support for the Wind River SBC8548 board -config SBC8560 - bool "Wind River SBC8560" - select DEFAULT_UIMAGE +config PPA8548 + bool "Prodrive PPA8548" help - This option enables support for the Wind River SBC8560 board - -config P2041_RDB - bool "Freescale P2041 RDB" + This option enables support for the Prodrive PPA8548 board. select DEFAULT_UIMAGE - select PPC_E500MC - select PHYS_64BIT - select SWIOTLB - select ARCH_REQUIRE_GPIOLIB - select GPIO_MPC8XXX select HAS_RAPIDIO - select PPC_EPAPR_HV_PIC - help - This option enables support for the P2041 RDB board -config P3041_DS - bool "Freescale P3041 DS" +config GE_IMP3A + bool "GE Intelligent Platforms IMP3A" select DEFAULT_UIMAGE - select PPC_E500MC - select PHYS_64BIT select SWIOTLB + select MMIO_NVRAM select ARCH_REQUIRE_GPIOLIB - select GPIO_MPC8XXX - select HAS_RAPIDIO - select PPC_EPAPR_HV_PIC + select GE_FPGA help - This option enables support for the P3041 DS board + This option enables support for the GE Intelligent Platforms IMP3A + board. -config P3060_QDS - bool "Freescale P3060 QDS" - select DEFAULT_UIMAGE - select PPC_E500MC - select PHYS_64BIT - select SWIOTLB - select GPIO_MPC8XXX - select HAS_RAPIDIO - select PPC_EPAPR_HV_PIC - help - This option enables support for the P3060 QDS board + This board is a 3U CompactPCI Single Board Computer with a Freescale + P2020 processor. -config P4080_DS - bool "Freescale P4080 DS" - select DEFAULT_UIMAGE - select PPC_E500MC - select PHYS_64BIT - select SWIOTLB - select ARCH_REQUIRE_GPIOLIB - select GPIO_MPC8XXX - select HAS_RAPIDIO - select PPC_EPAPR_HV_PIC +config SGY_CTS1000 + tristate "Servergy CTS-1000 support" + select GPIOLIB + select OF_GPIO + depends on CORENET_GENERIC help - This option enables support for the P4080 DS board + Enable this to support functionality in Servergy's CTS-1000 systems. endif # PPC32 -config P5020_DS - bool "Freescale P5020 DS" +config PPC_QEMU_E500 + bool "QEMU generic e500 platform" + select DEFAULT_UIMAGE + help + This option enables support for running as a QEMU guest using + QEMU's generic e500 machine. This is not required if you're + using a QEMU machine that targets a specific board, such as + mpc8544ds. + + Unlike most e500 boards that target a specific CPU, this + platform works with any e500-family CPU that QEMU supports. + Thus, you'll need to make sure CONFIG_PPC_E500MC is set or + unset based on the emulated CPU (or actual host CPU in the case + of KVM). + +config CORENET_GENERIC + bool "Freescale CoreNet Generic" select DEFAULT_UIMAGE select E500 select PPC_E500MC @@ -236,7 +270,13 @@ config P5020_DS select HAS_RAPIDIO select PPC_EPAPR_HV_PIC help - This option enables support for the P5020 DS board + This option enables support for the FSL CoreNet based boards. + For 32bit kernel, the following boards are supported: + P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080 + For 64bit kernel, the following boards are supported: + T4240 QDS and B4 QDS + The following boards are supported for both 32bit and 64bit kernel: + P5020 DS, P5040 DS and T104xQDS endif # FSL_SOC_BOOKE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 9cb2d4320dc..73032604662 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -5,6 +5,9 @@ obj-$(CONFIG_SMP) += smp.o obj-y += common.o +obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o +obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o +obj-$(CONFIG_C293_PCIE) += c293pcie.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o @@ -14,16 +17,17 @@ obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o -obj-$(CONFIG_P1023_RDS) += p1023_rds.o -obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o -obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o -obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o -obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o -obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o +obj-$(CONFIG_P1022_RDK) += p1022_rdk.o +obj-$(CONFIG_P1023_RDB) += p1023_rdb.o +obj-$(CONFIG_TWR_P102x) += twr_p102x.o +obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o -obj-$(CONFIG_SBC8560) += sbc8560.o obj-$(CONFIG_SBC8548) += sbc8548.o +obj-$(CONFIG_PPA8548) += ppa8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o +obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o +obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o +obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c b/arch/powerpc/platforms/85xx/bsc913x_qds.c new file mode 100644 index 00000000000..f0927e58af2 --- /dev/null +++ b/arch/powerpc/platforms/85xx/bsc913x_qds.c @@ -0,0 +1,74 @@ +/* + * BSC913xQDS Board Setup + * + * Author: + * Harninder Rai <harninder.rai@freescale.com> + * Priyanka Jain <Priyanka.Jain@freescale.com> + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/of_platform.h> +#include <linux/pci.h> +#include <asm/mpic.h> +#include <sysdev/fsl_soc.h> +#include <asm/udbg.h> + +#include "mpc85xx.h" +#include "smp.h" + +void __init bsc913x_qds_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + if (!mpic) + pr_err("bsc913x: Failed to allocate MPIC structure\n"); + else + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init bsc913x_qds_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("bsc913x_qds_setup_arch()", 0); + +#if defined(CONFIG_SMP) + mpc85xx_smp_init(); +#endif + + pr_info("bsc913x board from Freescale Semiconductor\n"); +} + +machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ + +static int __init bsc9132_qds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,bsc9132qds"); +} + +define_machine(bsc9132_qds) { + .name = "BSC9132 QDS", + .probe = bsc9132_qds_probe, + .setup_arch = bsc913x_qds_setup_arch, + .init_IRQ = bsc913x_qds_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/bsc913x_rdb.c b/arch/powerpc/platforms/85xx/bsc913x_rdb.c new file mode 100644 index 00000000000..9d57bedb940 --- /dev/null +++ b/arch/powerpc/platforms/85xx/bsc913x_rdb.c @@ -0,0 +1,67 @@ +/* + * BSC913xRDB Board Setup + * + * Author: Priyanka Jain <Priyanka.Jain@freescale.com> + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/of_platform.h> +#include <linux/pci.h> +#include <asm/mpic.h> +#include <sysdev/fsl_soc.h> +#include <asm/udbg.h> + +#include "mpc85xx.h" + +void __init bsc913x_rdb_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + if (!mpic) + pr_err("bsc913x: Failed to allocate MPIC structure\n"); + else + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init bsc913x_rdb_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("bsc913x_rdb_setup_arch()", 0); + + pr_info("bsc913x board from Freescale Semiconductor\n"); +} + +machine_device_initcall(bsc9131_rdb, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ + +static int __init bsc9131_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,bsc9131rdb"); +} + +define_machine(bsc9131_rdb) { + .name = "BSC9131 RDB", + .probe = bsc9131_rdb_probe, + .setup_arch = bsc913x_rdb_setup_arch, + .init_IRQ = bsc913x_rdb_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/c293pcie.c b/arch/powerpc/platforms/85xx/c293pcie.c new file mode 100644 index 00000000000..84476b64600 --- /dev/null +++ b/arch/powerpc/platforms/85xx/c293pcie.c @@ -0,0 +1,77 @@ +/* + * C293PCIE Board Setup + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "mpc85xx.h" + +void __init c293_pcie_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + + mpic_init(mpic); +} + + +/* + * Setup the architecture + */ +static void __init c293_pcie_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("c293_pcie_setup_arch()", 0); + + fsl_pci_assign_primary(); + + printk(KERN_INFO "C293 PCIE board from Freescale Semiconductor\n"); +} + +machine_arch_initcall(c293_pcie, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init c293_pcie_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,C293PCIE")) + return 1; + return 0; +} + +define_machine(c293_pcie) { + .name = "C293 PCIE", + .probe = c293_pcie_probe, + .setup_arch = c293_pcie_setup_arch, + .init_IRQ = c293_pcie_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c index 9fef5302adc..b564b5e23f7 100644 --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -5,8 +5,11 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/qe.h> #include <sysdev/cpm2_pic.h> #include "mpc85xx.h" @@ -21,6 +24,22 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = { { .compatible = "fsl,qe", }, { .compatible = "fsl,cpm2", }, { .compatible = "fsl,srio", }, + /* So that the DMA channel nodes can be probed individually: */ + { .compatible = "fsl,eloplus-dma", }, + /* For the PMC driver */ + { .compatible = "fsl,mpc8548-guts", }, + /* Probably unnecessary? */ + { .compatible = "gpio-leds", }, + /* For all PCI controllers */ + { .compatible = "fsl,mpc8540-pci", }, + { .compatible = "fsl,mpc8548-pcie", }, + { .compatible = "fsl,p1022-pcie", }, + { .compatible = "fsl,p1010-pcie", }, + { .compatible = "fsl,p1023-pcie", }, + { .compatible = "fsl,p4080-pcie", }, + { .compatible = "fsl,qoriq-pcie-v2.4", }, + { .compatible = "fsl,qoriq-pcie-v2.3", }, + { .compatible = "fsl,qoriq-pcie-v2.2", }, {}, }; @@ -64,3 +83,46 @@ void __init mpc85xx_cpm2_pic_init(void) irq_set_chained_handler(irq, cpm2_cascade); } #endif + +#ifdef CONFIG_QUICC_ENGINE +void __init mpc85xx_qe_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) { + np = of_find_node_by_name(NULL, "qe"); + if (!np) { + pr_err("%s: Could not find Quicc Engine node\n", + __func__); + return; + } + } + + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + + qe_reset(); + of_node_put(np); + +} + +void __init mpc85xx_qe_par_io_init(void) +{ + struct device_node *np; + + np = of_find_node_by_name(NULL, "par_io"); + if (np) { + struct device_node *ucc; + + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(ucc, "ucc") + par_io_of_config(ucc); + + } +} +#endif diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c deleted file mode 100644 index 07e3e6c4737..00000000000 --- a/arch/powerpc/platforms/85xx/corenet_ds.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Corenet based SoC DS Setup - * - * Maintained by Kumar Gala (see MAINTAINERS for contact information) - * - * Copyright 2009-2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/memblock.h> - -#include <asm/system.h> -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/ppc-pci.h> -#include <mm/mmu_decl.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/mpic.h> - -#include <linux/of_platform.h> -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> -#include "smp.h" - -void __init corenet_ds_pic_init(void) -{ - struct mpic *mpic; - unsigned int flags = MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU; - - if (ppc_md.get_irq == mpic_get_coreint_irq) - flags |= MPIC_ENABLE_COREINT; - - mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC "); - BUG_ON(mpic == NULL); - - mpic_init(mpic); -} - -/* - * Setup the architecture - */ -void __init corenet_ds_setup_arch(void) -{ -#ifdef CONFIG_PCI - struct device_node *np; - struct pci_controller *hose; -#endif - dma_addr_t max = 0xffffffff; - - mpc85xx_smp_init(); - -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,p4080-pcie") || - of_device_is_compatible(np, "fsl,qoriq-pcie-v2.2")) { - fsl_add_bridge(np, 0); - hose = pci_find_hose_for_OF_device(np); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); - } - } - -#ifdef CONFIG_PPC64 - pci_devs_phb_init(); -#endif -#endif - -#ifdef CONFIG_SWIOTLB - if (memblock_end_of_DRAM() > max) { - ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_dma_ops); - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; - } -#endif - pr_info("%s board from Freescale Semiconductor\n", ppc_md.name); -} - -static const struct of_device_id of_device_ids[] __devinitconst = { - { - .compatible = "simple-bus" - }, - { - .compatible = "fsl,srio", - }, - { - .compatible = "fsl,p4080-pcie", - }, - { - .compatible = "fsl,qoriq-pcie-v2.2", - }, - /* The following two are for the Freescale hypervisor */ - { - .name = "hypervisor", - }, - { - .name = "handles", - }, - {} -}; - -int __init corenet_ds_publish_devices(void) -{ - return of_platform_bus_probe(NULL, of_device_ids, NULL); -} diff --git a/arch/powerpc/platforms/85xx/corenet_ds.h b/arch/powerpc/platforms/85xx/corenet_ds.h deleted file mode 100644 index ddd700b2303..00000000000 --- a/arch/powerpc/platforms/85xx/corenet_ds.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Corenet based SoC DS Setup - * - * Copyright 2009 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef CORENET_DS_H -#define CORENET_DS_H - -extern void __init corenet_ds_pic_init(void); -extern void __init corenet_ds_setup_arch(void); -extern int __init corenet_ds_publish_devices(void); - -#endif diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c new file mode 100644 index 00000000000..5db1e117fdd --- /dev/null +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -0,0 +1,206 @@ +/* + * Corenet based SoC DS Setup + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/ehv_pic.h> +#include <asm/qe_ic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" +#include "mpc85xx.h" + +void __init corenet_gen_pic_init(void) +{ + struct mpic *mpic; + unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU | + MPIC_NO_RESET; + + struct device_node *np; + + if (ppc_md.get_irq == mpic_get_coreint_irq) + flags |= MPIC_ENABLE_COREINT; + + mpic = mpic_alloc(NULL, 0, flags, 0, 512, " OpenPIC "); + BUG_ON(mpic == NULL); + + mpic_init(mpic); + + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (np) { + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + of_node_put(np); + } +} + +/* + * Setup the architecture + */ +void __init corenet_gen_setup_arch(void) +{ + mpc85xx_smp_init(); + + swiotlb_detect_4g(); + + pr_info("%s board\n", ppc_md.name); + + mpc85xx_qe_init(); +} + +static const struct of_device_id of_device_ids[] = { + { + .compatible = "simple-bus" + }, + { + .compatible = "fsl,srio", + }, + { + .compatible = "fsl,p4080-pcie", + }, + { + .compatible = "fsl,qoriq-pcie-v2.2", + }, + { + .compatible = "fsl,qoriq-pcie-v2.3", + }, + { + .compatible = "fsl,qoriq-pcie-v2.4", + }, + { + .compatible = "fsl,qoriq-pcie-v3.0", + }, + { + .compatible = "fsl,qe", + }, + /* The following two are for the Freescale hypervisor */ + { + .name = "hypervisor", + }, + { + .name = "handles", + }, + {} +}; + +int __init corenet_gen_publish_devices(void) +{ + return of_platform_bus_probe(NULL, of_device_ids, NULL); +} + +static const char * const boards[] __initconst = { + "fsl,P2041RDB", + "fsl,P3041DS", + "fsl,OCA4080", + "fsl,P4080DS", + "fsl,P5020DS", + "fsl,P5040DS", + "fsl,T4240QDS", + "fsl,B4860QDS", + "fsl,B4420QDS", + "fsl,B4220QDS", + "fsl,T1040QDS", + "fsl,T1042QDS", + "keymile,kmcoge4", + NULL +}; + +static const char * const hv_boards[] __initconst = { + "fsl,P2041RDB-hv", + "fsl,P3041DS-hv", + "fsl,OCA4080-hv", + "fsl,P4080DS-hv", + "fsl,P5020DS-hv", + "fsl,P5040DS-hv", + "fsl,T4240QDS-hv", + "fsl,B4860QDS-hv", + "fsl,B4420QDS-hv", + "fsl,B4220QDS-hv", + "fsl,T1040QDS-hv", + "fsl,T1042QDS-hv", + NULL +}; + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init corenet_generic_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_SMP + extern struct smp_ops_t smp_85xx_ops; +#endif + + if (of_flat_dt_match(root, boards)) + return 1; + + /* Check if we're running under the Freescale hypervisor */ + if (of_flat_dt_match(root, hv_boards)) { + ppc_md.init_IRQ = ehv_pic_init; + ppc_md.get_irq = ehv_pic_get_irq; + ppc_md.restart = fsl_hv_restart; + ppc_md.power_off = fsl_hv_halt; + ppc_md.halt = fsl_hv_halt; +#ifdef CONFIG_SMP + /* + * Disable the timebase sync operations because we can't write + * to the timebase registers under the hypervisor. + */ + smp_85xx_ops.give_timebase = NULL; + smp_85xx_ops.take_timebase = NULL; +#endif + return 1; + } + + return 0; +} + +define_machine(corenet_generic) { + .name = "CoreNet Generic", + .probe = corenet_generic_probe, + .setup_arch = corenet_gen_setup_arch, + .init_IRQ = corenet_gen_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_coreint_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PPC64 + .power_save = book3e_idle, +#else + .power_save = e500_idle, +#endif +}; + +machine_arch_initcall(corenet_generic, corenet_gen_publish_devices); + +#ifdef CONFIG_SWIOTLB +machine_arch_initcall(corenet_generic, swiotlb_setup_bus_notifier); +#endif diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c new file mode 100644 index 00000000000..11790e074c8 --- /dev/null +++ b/arch/powerpc/platforms/85xx/ge_imp3a.c @@ -0,0 +1,224 @@ +/* + * GE IMP3A Board Setup + * + * Author Martyn Welch <martyn.welch@ge.com> + * + * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup) + * Copyright 2007 Freescale Semiconductor Inc. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/interrupt.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/swiotlb.h> +#include <asm/nvram.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" +#include <sysdev/ge/ge_pic.h> + +void __iomem *imp3a_regs; + +void __init ge_imp3a_pic_init(void) +{ + struct mpic *mpic; + struct device_node *np; + struct device_node *cascade_node = NULL; + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) { + mpic = mpic_alloc(NULL, 0, + MPIC_NO_RESET | + MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + } else { + mpic = mpic_alloc(NULL, 0, + MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + } + + BUG_ON(mpic == NULL); + mpic_init(mpic); + /* + * There is a simple interrupt handler in the main FPGA, this needs + * to be cascaded into the MPIC + */ + for_each_node_by_type(np, "interrupt-controller") + if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_WARNING "IMP3A: No FPGA PIC\n"); + return; + } + + gef_pic_init(cascade_node); + of_node_put(cascade_node); +} + +static void ge_imp3a_pci_assign_primary(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; + struct resource rsrc; + + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,mpc8540-pci") || + of_device_is_compatible(np, "fsl,mpc8548-pcie") || + of_device_is_compatible(np, "fsl,p2020-pcie")) { + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == 0x9000) + fsl_pci_primary = np; + } + } +#endif +} + +/* + * Setup the architecture + */ +static void __init ge_imp3a_setup_arch(void) +{ + struct device_node *regs; + + if (ppc_md.progress) + ppc_md.progress("ge_imp3a_setup_arch()", 0); + + mpc85xx_smp_init(); + + ge_imp3a_pci_assign_primary(); + + swiotlb_detect_4g(); + + /* Remap basic board registers */ + regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs"); + if (regs) { + imp3a_regs = of_iomap(regs, 0); + if (imp3a_regs == NULL) + printk(KERN_WARNING "Unable to map board registers\n"); + of_node_put(regs); + } + +#if defined(CONFIG_MMIO_NVRAM) + mmio_nvram_init(); +#endif + + printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n"); +} + +/* Return the PCB revision */ +static unsigned int ge_imp3a_get_pcb_rev(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs); + return (reg >> 8) & 0xff; +} + +/* Return the board (software) revision */ +static unsigned int ge_imp3a_get_board_rev(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x2); + return reg & 0xff; +} + +/* Return the FPGA revision */ +static unsigned int ge_imp3a_get_fpga_rev(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x2); + return (reg >> 8) & 0xff; +} + +/* Return compactPCI Geographical Address */ +static unsigned int ge_imp3a_get_cpci_geo_addr(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x6); + return (reg & 0x0f00) >> 8; +} + +/* Return compactPCI System Controller Status */ +static unsigned int ge_imp3a_get_cpci_is_syscon(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x6); + return reg & (1 << 12); +} + +static void ge_imp3a_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); + + seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(), + ('A' + ge_imp3a_get_board_rev() - 1)); + + seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev()); + + seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr()); + + seq_printf(m, "cPCI syscon\t: %s\n", + ge_imp3a_get_cpci_is_syscon() ? "yes" : "no"); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ge_imp3a_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ge,IMP3A"); +} + +machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices); + +machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier); + +define_machine(ge_imp3a) { + .name = "GE_IMP3A", + .probe = ge_imp3a_probe, + .setup_arch = ge_imp3a_setup_arch, + .init_IRQ = ge_imp3a_pic_init, + .show_cpuinfo = ge_imp3a_show_cpuinfo, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index 20f75d7819c..3dc1bda3ddc 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -20,7 +20,6 @@ #include <linux/seq_file.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -57,8 +56,7 @@ static void machine_restart(char *cmd) static void __init ksi8560_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index cf266826682..a378ba3519e 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -17,9 +17,7 @@ #include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/of_platform.h> -#include <linux/memblock.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -36,9 +34,7 @@ void __init mpc8536_ds_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -49,46 +45,17 @@ void __init mpc8536_ds_pic_init(void) */ static void __init mpc8536_ds_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; - struct pci_controller *hose; -#endif - dma_addr_t max = 0xffffffff; - if (ppc_md.progress) ppc_md.progress("mpc8536_ds_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie")) { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == 0x8000) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); - - hose = pci_find_hose_for_OF_device(np); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); - } - } - -#endif + fsl_pci_assign_primary(); -#ifdef CONFIG_SWIOTLB - if (memblock_end_of_DRAM() > max) { - ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_dma_ops); - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; - } -#endif + swiotlb_detect_4g(); printk("MPC8536 DS board from Freescale Semiconductor\n"); } -machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices); +machine_arch_initcall(mpc8536_ds, mpc85xx_common_publish_devices); machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier); @@ -109,6 +76,7 @@ define_machine(mpc8536_ds) { .init_IRQ = mpc8536_ds_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h index 2aa7c5dc2c7..39056f6befe 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx.h +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -8,4 +8,12 @@ extern void mpc85xx_cpm2_pic_init(void); static inline void __init mpc85xx_cpm2_pic_init(void) {} #endif /* CONFIG_CPM2 */ +#ifdef CONFIG_QUICC_ENGINE +extern void mpc85xx_qe_init(void); +extern void mpc85xx_qe_par_io_init(void); +#else +static inline void __init mpc85xx_qe_init(void) {} +static inline void __init mpc85xx_qe_par_io_init(void) {} +#endif + #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 3bebb5173bf..7d12a19aa7e 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -19,7 +19,6 @@ #include <linux/seq_file.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -50,8 +49,7 @@ static int mpc85xx_exclude_device(struct pci_controller *hose, static void __init mpc85xx_ads_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -139,10 +137,6 @@ static void __init init_ioports(void) static void __init mpc85xx_ads_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("mpc85xx_ads_setup_arch()", 0); @@ -152,11 +146,10 @@ static void __init mpc85xx_ads_setup_arch(void) #endif #ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8540-pci") - fsl_add_bridge(np, 1); - ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif + + fsl_pci_assign_primary(); } static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) @@ -175,7 +168,7 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } -machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices); +machine_arch_initcall(mpc85xx_ads, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 40f03da616a..b0753e22208 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -3,7 +3,7 @@ * * Maintained by Kumar Gala (see MAINTAINERS for contact information) * - * Copyright 2005 Freescale Semiconductor Inc. + * Copyright 2005, 2011-2012 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -27,7 +27,6 @@ #include <linux/fsl_devices.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/pgtable.h> #include <asm/page.h> #include <linux/atomic.h> @@ -48,17 +47,24 @@ #include "mpc85xx.h" -/* CADMUS info */ -/* xxx - galak, move into device tree */ -#define CADMUS_BASE (0xf8004000) -#define CADMUS_SIZE (256) -#define CM_VER (0) -#define CM_CSR (1) -#define CM_RST (2) - +/* + * The CDS board contains an FPGA/CPLD called "Cadmus", which collects + * various logic and performs system control functions. + * Here is the FPGA/CPLD register map. + */ +struct cadmus_reg { + u8 cm_ver; /* Board version */ + u8 cm_csr; /* General control/status */ + u8 cm_rst; /* Reset control */ + u8 cm_hsclk; /* High speed clock */ + u8 cm_hsxclk; /* High speed clock extended */ + u8 cm_led; /* LED data */ + u8 cm_pci; /* PCI control/status */ + u8 cm_dma; /* DMA control */ + u8 res[248]; /* Total 256 bytes */ +}; -static int cds_pci_slot = 2; -static volatile u8 *cadmus; +static struct cadmus_reg *cadmus; #ifdef CONFIG_PCI @@ -148,7 +154,7 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev) } } -static void __devinit skip_fake_bridge(struct pci_dev *dev) +static void skip_fake_bridge(struct pci_dev *dev) { /* Make it an error to skip the fake bridge * in pci_setup_device() in probe.c */ @@ -158,6 +164,33 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge); DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge); DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge); +#define PCI_DEVICE_ID_IDT_TSI310 0x01a7 + +/* + * Fix Tsi310 PCI-X bridge resource. + * Force the bridge to open a window from 0x0000-0x1fff in PCI I/O space. + * This allows legacy I/O(i8259, etc) on the VIA southbridge to be accessed. + */ +void mpc85xx_cds_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + struct resource *res = bus->resource[0]; + + if (dev != NULL && + dev->vendor == PCI_VENDOR_ID_IBM && + dev->device == PCI_DEVICE_ID_IDT_TSI310) { + if (res) { + res->start = 0; + res->end = 0x1fff; + res->flags = IORESOURCE_IO; + pr_info("mpc85xx_cds: PCI bridge resource fixup applied\n"); + pr_info("mpc85xx_cds: %pR\n", res); + } + } + + fsl_pcibios_fixup_bus(bus); +} + #ifdef CONFIG_PPC_I8259 static void mpc85xx_8259_cascade_handler(unsigned int irq, struct irq_desc *desc) @@ -188,8 +221,7 @@ static struct irqaction mpc85xxcds_8259_irqaction = { static void __init mpc85xx_cds_pic_init(void) { struct mpic *mpic; - mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -244,44 +276,72 @@ machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach); #endif /* CONFIG_PPC_I8259 */ +static void mpc85xx_cds_pci_assign_primary(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; + + if (fsl_pci_primary) + return; + + /* + * MPC85xx_CDS has ISA bridge but unfortunately there is no + * isa node in device tree. We now looking for i8259 node as + * a workaround for such a broken device tree. This routine + * is for complying to all device trees. + */ + np = of_find_node_by_name(NULL, "i8259"); + while ((fsl_pci_primary = of_get_parent(np))) { + of_node_put(np); + np = fsl_pci_primary; + + if ((of_device_is_compatible(np, "fsl,mpc8540-pci") || + of_device_is_compatible(np, "fsl,mpc8548-pcie")) && + of_device_is_available(np)) + return; + } +#endif +} + /* * Setup the architecture */ static void __init mpc85xx_cds_setup_arch(void) { -#ifdef CONFIG_PCI struct device_node *np; -#endif + int cds_pci_slot; if (ppc_md.progress) ppc_md.progress("mpc85xx_cds_setup_arch()", 0); - cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE); - cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1; + np = of_find_compatible_node(NULL, NULL, "fsl,mpc8548cds-fpga"); + if (!np) { + pr_err("Could not find FPGA node.\n"); + return; + } + + cadmus = of_iomap(np, 0); + of_node_put(np); + if (!cadmus) { + pr_err("Fail to map FPGA area.\n"); + return; + } if (ppc_md.progress) { char buf[40]; + cds_pci_slot = ((in_8(&cadmus->cm_csr) >> 6) & 0x3) + 1; snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n", - cadmus[CM_VER], cds_pci_slot); + in_8(&cadmus->cm_ver), cds_pci_slot); ppc_md.progress(buf, 0); } #ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie")) { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == 0x8000) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); - } - } - ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif + + mpc85xx_cds_pci_assign_primary(); + fsl_pci_assign_primary(); } static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) @@ -292,7 +352,8 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]); + seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", + in_8(&cadmus->cm_ver)); seq_printf(m, "PVR\t\t: 0x%x\n", pvid); seq_printf(m, "SVR\t\t: 0x%x\n", svid); @@ -312,7 +373,7 @@ static int __init mpc85xx_cds_probe(void) return of_flat_dt_is_compatible(root, "MPC85xxCDS"); } -machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices); +machine_arch_initcall(mpc85xx_cds, mpc85xx_common_publish_devices); define_machine(mpc85xx_cds) { .name = "MPC85xx CDS", @@ -323,7 +384,8 @@ define_machine(mpc85xx_cds) { .get_irq = mpic_get_irq, #ifdef CONFIG_PCI .restart = mpc85xx_cds_restart, - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_bus = mpc85xx_cds_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #else .restart = fsl_rstcr_restart, #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index eefbb91e1d6..ffdf02121a7 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -20,9 +20,7 @@ #include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/of_platform.h> -#include <linux/memblock.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -72,13 +70,13 @@ void __init mpc85xx_ds_pic_init(void) if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) { mpic = mpic_alloc(NULL, 0, - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_NO_RESET | + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } else { mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } @@ -115,71 +113,53 @@ void __init mpc85xx_ds_pic_init(void) } #ifdef CONFIG_PCI -static int primary_phb_addr; extern int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn); +static struct device_node *pci_with_uli; + static int mpc85xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { - struct device_node* node; - struct resource rsrc; - - node = hose->dn; - of_address_to_resource(node, 0, &rsrc); - - if ((rsrc.start & 0xfffff) == primary_phb_addr) { + if (hose->dn == pci_with_uli) return uli_exclude_device(hose, bus, devfn); - } return PCIBIOS_SUCCESSFUL; } #endif /* CONFIG_PCI */ -/* - * Setup the architecture - */ -static void __init mpc85xx_ds_setup_arch(void) +static void __init mpc85xx_ds_uli_init(void) { #ifdef CONFIG_PCI - struct device_node *np; - struct pci_controller *hose; -#endif - dma_addr_t max = 0xffffffff; + struct device_node *node; - if (ppc_md.progress) - ppc_md.progress("mpc85xx_ds_setup_arch()", 0); + /* See if we have a ULI under the primary */ -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie") || - of_device_is_compatible(np, "fsl,p2020-pcie")) { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == primary_phb_addr) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); - - hose = pci_find_hose_for_OF_device(np); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + node = of_find_node_by_name(NULL, "uli1575"); + while ((pci_with_uli = of_get_parent(node))) { + of_node_put(node); + node = pci_with_uli; + + if (pci_with_uli == fsl_pci_primary) { + ppc_md.pci_exclude_device = mpc85xx_exclude_device; + break; } } - - ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif +} - mpc85xx_smp_init(); +/* + * Setup the architecture + */ +static void __init mpc85xx_ds_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("mpc85xx_ds_setup_arch()", 0); -#ifdef CONFIG_SWIOTLB - if (memblock_end_of_DRAM() > max) { - ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_dma_ops); - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; - } -#endif + swiotlb_detect_4g(); + fsl_pci_assign_primary(); + mpc85xx_ds_uli_init(); + mpc85xx_smp_init(); printk("MPC85xx DS board from Freescale Semiconductor\n"); } @@ -191,19 +171,12 @@ static int __init mpc8544_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "MPC8544DS")) { -#ifdef CONFIG_PCI - primary_phb_addr = 0xb000; -#endif - return 1; - } - - return 0; + return !!of_flat_dt_is_compatible(root, "MPC8544DS"); } -machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices); -machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices); -machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices); +machine_arch_initcall(mpc8544_ds, mpc85xx_common_publish_devices); +machine_arch_initcall(mpc8572_ds, mpc85xx_common_publish_devices); +machine_arch_initcall(p2020_ds, mpc85xx_common_publish_devices); machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier); machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier); @@ -216,14 +189,7 @@ static int __init mpc8572_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS")) { -#ifdef CONFIG_PCI - primary_phb_addr = 0x8000; -#endif - return 1; - } - - return 0; + return !!of_flat_dt_is_compatible(root, "fsl,MPC8572DS"); } /* @@ -233,14 +199,7 @@ static int __init p2020_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) { -#ifdef CONFIG_PCI - primary_phb_addr = 0x9000; -#endif - return 1; - } - - return 0; + return !!of_flat_dt_is_compatible(root, "fsl,P2020DS"); } define_machine(mpc8544_ds) { @@ -250,6 +209,7 @@ define_machine(mpc8544_ds) { .init_IRQ = mpc85xx_ds_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, @@ -264,6 +224,7 @@ define_machine(mpc8572_ds) { .init_IRQ = mpc85xx_ds_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, @@ -278,6 +239,7 @@ define_machine(p2020_ds) { .init_IRQ = mpc85xx_ds_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 1d15a0cd2c8..a392e94a07f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -1,5 +1,6 @@ /* - * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved. + * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc. + * All rights reserved. * * Author: Andy Fleming <afleming@freescale.com> * @@ -34,7 +35,6 @@ #include <linux/phy.h> #include <linux/memblock.h> -#include <asm/system.h> #include <linux/atomic.h> #include <asm/time.h> #include <asm/io.h> @@ -51,6 +51,7 @@ #include <asm/qe_ic.h> #include <asm/mpic.h> #include <asm/swiotlb.h> +#include <asm/fsl_guts.h> #include "smp.h" #include "mpc85xx.h" @@ -205,9 +206,7 @@ static void __init mpc85xx_mds_reset_ucc_phys(void) setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); - for (np = NULL; (np = of_find_compatible_node(np, - "network", - "ucc_geth")) != NULL;) { + for_each_compatible_node(np, "network", "ucc_geth") { const unsigned int *prop; int ucc_num; @@ -239,63 +238,32 @@ static void __init mpc85xx_mds_qe_init(void) { struct device_node *np; - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - np = of_find_node_by_name(NULL, "qe"); - if (!np) - return; - } - - if (!of_device_is_available(np)) { - of_node_put(np); - return; - } - - qe_reset(); - of_node_put(np); - - np = of_find_node_by_name(NULL, "par_io"); - if (np) { - struct device_node *ucc; - - par_io_init(np); - of_node_put(np); - - for_each_node_by_name(ucc, "ucc") - par_io_of_config(ucc); - } - + mpc85xx_qe_init(); + mpc85xx_qe_par_io_init(); mpc85xx_mds_reset_ucc_phys(); if (machine_is(p1021_mds)) { -#define MPC85xx_PMUXCR_OFFSET 0x60 -#define MPC85xx_PMUXCR_QE0 0x00008000 -#define MPC85xx_PMUXCR_QE3 0x00001000 -#define MPC85xx_PMUXCR_QE9 0x00000040 -#define MPC85xx_PMUXCR_QE12 0x00000008 - static __be32 __iomem *pmuxcr; - np = of_find_node_by_name(NULL, "global-utilities"); + struct ccsr_guts __iomem *guts; + np = of_find_node_by_name(NULL, "global-utilities"); if (np) { - pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET; - - if (!pmuxcr) - printk(KERN_EMERG "Error: Alternate function" - " signal multiplex control register not" - " mapped!\n"); - else + guts = of_iomap(np, 0); + if (!guts) + pr_err("mpc85xx-rdb: could not map global utilities register\n"); + else{ /* P1021 has pins muxed for QE and other functions. To * enable QE UEC mode, we need to set bit QE0 for UCC1 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 * and QE12 for QE MII management signals in PMUXCR * register. */ - setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 | - MPC85xx_PMUXCR_QE3 | - MPC85xx_PMUXCR_QE9 | - MPC85xx_PMUXCR_QE12); - + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + } of_node_put(np); } @@ -333,44 +301,16 @@ static void __init mpc85xx_mds_qeic_init(void) { } static void __init mpc85xx_mds_setup_arch(void) { -#ifdef CONFIG_PCI - struct pci_controller *hose; - struct device_node *np; -#endif - dma_addr_t max = 0xffffffff; - if (ppc_md.progress) ppc_md.progress("mpc85xx_mds_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie")) { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == 0x8000) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); - - hose = pci_find_hose_for_OF_device(np); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); - } - } -#endif - mpc85xx_smp_init(); mpc85xx_mds_qe_init(); -#ifdef CONFIG_SWIOTLB - if (memblock_end_of_DRAM() > max) { - ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_dma_ops); - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; - } -#endif + fsl_pci_assign_primary(); + + swiotlb_detect_4g(); } @@ -405,12 +345,6 @@ static int __init board_fixups(void) machine_arch_initcall(mpc8568_mds, board_fixups); machine_arch_initcall(mpc8569_mds, board_fixups); -static struct of_device_id mpc85xx_ids[] = { - { .compatible = "fsl,mpc8548-guts", }, - { .compatible = "gpio-leds", }, - {}, -}; - static int __init mpc85xx_publish_devices(void) { if (machine_is(mpc8568_mds)) @@ -418,15 +352,12 @@ static int __init mpc85xx_publish_devices(void) if (machine_is(mpc8569_mds)) simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); - mpc85xx_common_publish_devices(); - of_platform_bus_probe(NULL, mpc85xx_ids, NULL); - - return 0; + return mpc85xx_common_publish_devices(); } -machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); -machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices); -machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices); +machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices); +machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices); +machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices); machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier); machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier); @@ -434,9 +365,8 @@ machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier); static void __init mpc85xx_mds_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); @@ -462,6 +392,7 @@ define_machine(mpc8568_mds) { .progress = udbg_progress, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif }; @@ -483,6 +414,7 @@ define_machine(mpc8569_mds) { .progress = udbg_progress, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif }; @@ -505,6 +437,7 @@ define_machine(p1021_mds) { .progress = udbg_progress, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index ccf520e890b..e358bed66d0 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -1,7 +1,7 @@ /* * MPC85xx RDB Board Setup * - * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2009,2012-2013 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -18,7 +18,6 @@ #include <linux/interrupt.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -26,6 +25,9 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <asm/mpic.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> +#include <asm/fsl_guts.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> @@ -47,21 +49,36 @@ void __init mpc85xx_rdb_pic_init(void) struct mpic *mpic; unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) { - mpic = mpic_alloc(NULL, 0, - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + mpic = mpic_alloc(NULL, 0, MPIC_NO_RESET | + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } else { mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } BUG_ON(mpic == NULL); mpic_init(mpic); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (np) { + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + of_node_put(np); + + } else + pr_err("%s: Could not find qe-ic node\n", __func__); +#endif + } /* @@ -69,27 +86,62 @@ void __init mpc85xx_rdb_pic_init(void) */ static void __init mpc85xx_rdb_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("mpc85xx_rdb_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8548-pcie")) - fsl_add_bridge(np, 0); - } + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); + +#ifdef CONFIG_QUICC_ENGINE + mpc85xx_qe_init(); + mpc85xx_qe_par_io_init(); +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) + if (machine_is(p1025_rdb)) { + struct device_node *np; + + struct ccsr_guts __iomem *guts; + + np = of_find_node_by_name(NULL, "global-utilities"); + if (np) { + guts = of_iomap(np, 0); + if (!guts) { + + pr_err("mpc85xx-rdb: could not map global utilities register\n"); + } else { + /* P1025 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management singals in PMUXCR + * register. + */ + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + } + of_node_put(np); + } + + } #endif +#endif /* CONFIG_QUICC_ENGINE */ - mpc85xx_smp_init(); printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n"); } -machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices); -machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices); +machine_arch_initcall(p2020_rdb, mpc85xx_common_publish_devices); +machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices); +machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices); +machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices); +machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices); +machine_arch_initcall(p1020_rdb_pd, mpc85xx_common_publish_devices); +machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices); +machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices); +machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices); +machine_arch_initcall(p1024_rdb, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -112,6 +164,66 @@ static int __init p1020_rdb_probe(void) return 0; } +static int __init p1020_rdb_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC"); +} + +static int __init p1020_rdb_pd_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PD"); +} + +static int __init p1021_rdb_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P1021RDB-PC")) + return 1; + return 0; +} + +static int __init p2020_rdb_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P2020RDB-PC")) + return 1; + return 0; +} + +static int __init p1025_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1025RDB"); +} + +static int __init p1020_mbg_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1020MBG-PC"); +} + +static int __init p1020_utm_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC"); +} + +static int __init p1024_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1024RDB"); +} + define_machine(p2020_rdb) { .name = "P2020 RDB", .probe = p2020_rdb_probe, @@ -119,6 +231,7 @@ define_machine(p2020_rdb) { .init_IRQ = mpc85xx_rdb_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, @@ -133,6 +246,127 @@ define_machine(p1020_rdb) { .init_IRQ = mpc85xx_rdb_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1021_rdb_pc) { + .name = "P1021 RDB-PC", + .probe = p1021_rdb_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p2020_rdb_pc) { + .name = "P2020RDB-PC", + .probe = p2020_rdb_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1025_rdb) { + .name = "P1025 RDB", + .probe = p1025_rdb_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1020_mbg_pc) { + .name = "P1020 MBG-PC", + .probe = p1020_mbg_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1020_utm_pc) { + .name = "P1020 UTM-PC", + .probe = p1020_utm_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1020_rdb_pc) { + .name = "P1020RDB-PC", + .probe = p1020_rdb_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1020_rdb_pd) { + .name = "P1020RDB-PD", + .probe = p1020_rdb_pd_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1024_rdb) { + .name = "P1024 RDB", + .probe = p1024_rdb_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c index 538bc3f57e9..ad1a3d438a9 100644 --- a/arch/powerpc/platforms/85xx/p1010rdb.c +++ b/arch/powerpc/platforms/85xx/p1010rdb.c @@ -16,7 +16,6 @@ #include <linux/interrupt.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -32,9 +31,8 @@ void __init p1010_rdb_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); @@ -48,25 +46,15 @@ void __init p1010_rdb_pic_init(void) */ static void __init p1010_rdb_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("p1010_rdb_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,p1010-pcie")) - fsl_add_bridge(np, 0); - } - -#endif + fsl_pci_assign_primary(); printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n"); } -machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices); +machine_arch_initcall(p1010_rdb, mpc85xx_common_publish_devices); machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier); /* @@ -78,6 +66,8 @@ static int __init p1010_rdb_probe(void) if (of_flat_dt_is_compatible(root, "fsl,P1010RDB")) return 1; + if (of_flat_dt_is_compatible(root, "fsl,P1010RDB-PB")) + return 1; return 0; } @@ -88,6 +78,7 @@ define_machine(p1010_rdb) { .init_IRQ = p1010_rdb_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index b0984ada3f8..6ac986d3f8a 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -18,7 +18,6 @@ #include <linux/pci.h> #include <linux/of_platform.h> -#include <linux/memblock.h> #include <asm/div64.h> #include <asm/mpic.h> #include <asm/swiotlb.h> @@ -27,12 +26,17 @@ #include <sysdev/fsl_pci.h> #include <asm/udbg.h> #include <asm/fsl_guts.h> +#include <asm/fsl_lbc.h> #include "smp.h" #include "mpc85xx.h" #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) +#define PMUXCR_ELBCDIU_MASK 0xc0000000 +#define PMUXCR_ELBCDIU_NOR16 0x80000000 +#define PMUXCR_ELBCDIU_DIU 0x40000000 + /* * Board-specific initialization of the DIU. This code should probably be * executed when the DIU is opened, rather than in arch code, but the DIU @@ -50,11 +54,22 @@ #define CLKDVDR_PXCLK_MASK 0x00FF0000 /* Some ngPIXIS register definitions */ +#define PX_CTL 3 +#define PX_BRDCFG0 8 +#define PX_BRDCFG1 9 + +#define PX_BRDCFG0_ELBC_SPI_MASK 0xc0 +#define PX_BRDCFG0_ELBC_SPI_ELBC 0x00 +#define PX_BRDCFG0_ELBC_SPI_NULL 0xc0 +#define PX_BRDCFG0_ELBC_DIU 0x02 + #define PX_BRDCFG1_DVIEN 0x80 #define PX_BRDCFG1_DFPEN 0x40 #define PX_BRDCFG1_BACKLIGHT 0x20 #define PX_BRDCFG1_DDCEN 0x10 +#define PX_CTL_ALTACC 0x80 + /* * DIU Area Descriptor * @@ -91,86 +106,262 @@ (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) -/** - * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth +struct fsl_law { + u32 lawbar; + u32 reserved1; + u32 lawar; + u32 reserved[5]; +}; + +#define LAWBAR_MASK 0x00F00000 +#define LAWBAR_SHIFT 12 + +#define LAWAR_EN 0x80000000 +#define LAWAR_TGT_MASK 0x01F00000 +#define LAW_TRGT_IF_LBC (0x04 << 20) + +#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK) +#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC) + +#define BR_BA 0xFFFF8000 + +/* + * Map a BRx value to a physical address * - * The Area Descriptor is a 32-bit value that determine which bits in each - * pixel are to be used for each color. + * The localbus BRx registers only store the lower 32 bits of the address. To + * obtain the upper four bits, we need to scan the LAW table. The entry which + * maps to the localbus will contain the upper four bits. */ -static u32 p1022ds_get_pixel_format(enum fsl_diu_monitor_port port, - unsigned int bits_per_pixel) +static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br) { - switch (bits_per_pixel) { - case 32: - /* 0x88883316 */ - return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8); - case 24: - /* 0x88082219 */ - return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8); - case 16: - /* 0x65053118 */ - return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0); - default: - pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); - return 0; +#ifndef CONFIG_PHYS_64BIT + /* + * If we only have 32-bit addressing, then the BRx address *is* the + * physical address. + */ + return br & BR_BA; +#else + const struct fsl_law *law = ecm + 0xc08; + unsigned int i; + + for (i = 0; i < count; i++) { + u64 lawbar = in_be32(&law[i].lawbar); + u32 lawar = in_be32(&law[i].lawar); + + if ((lawar & LAWAR_MASK) == LAWAR_MATCH) + /* Extract the upper four bits */ + return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12); } -} -/** - * p1022ds_set_gamma_table: update the gamma table, if necessary - * - * On some boards, the gamma table for some ports may need to be modified. - * This is not the case on the P1022DS, so we do nothing. -*/ -static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port, - char *gamma_table_base) -{ + return 0; +#endif } /** * p1022ds_set_monitor_port: switch the output to a different monitor port - * */ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) { - struct device_node *np; - void __iomem *pixis; - u8 __iomem *brdcfg1; - - np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga"); - if (!np) - /* older device trees used "fsl,p1022ds-pixis" */ - np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis"); - if (!np) { - pr_err("p1022ds: missing ngPIXIS node\n"); + struct device_node *guts_node; + struct device_node *lbc_node = NULL; + struct device_node *law_node = NULL; + struct ccsr_guts __iomem *guts; + struct fsl_lbc_regs *lbc = NULL; + void *ecm = NULL; + u8 __iomem *lbc_lcs0_ba = NULL; + u8 __iomem *lbc_lcs1_ba = NULL; + phys_addr_t cs0_addr, cs1_addr; + u32 br0, or0, br1, or1; + const __be32 *iprop; + unsigned int num_laws; + u8 b; + + /* Map the global utilities registers. */ + guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); + if (!guts_node) { + pr_err("p1022ds: missing global utilities device node\n"); return; } - pixis = of_iomap(np, 0); - if (!pixis) { - pr_err("p1022ds: could not map ngPIXIS registers\n"); - return; + guts = of_iomap(guts_node, 0); + if (!guts) { + pr_err("p1022ds: could not map global utilities device\n"); + goto exit; + } + + lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc"); + if (!lbc_node) { + pr_err("p1022ds: missing localbus node\n"); + goto exit; + } + + lbc = of_iomap(lbc_node, 0); + if (!lbc) { + pr_err("p1022ds: could not map localbus node\n"); + goto exit; + } + + law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law"); + if (!law_node) { + pr_err("p1022ds: missing local access window node\n"); + goto exit; + } + + ecm = of_iomap(law_node, 0); + if (!ecm) { + pr_err("p1022ds: could not map local access window node\n"); + goto exit; + } + + iprop = of_get_property(law_node, "fsl,num-laws", NULL); + if (!iprop) { + pr_err("p1022ds: LAW node is missing fsl,num-laws property\n"); + goto exit; + } + num_laws = be32_to_cpup(iprop); + + /* + * Indirect mode requires both BR0 and BR1 to be set to "GPCM", + * otherwise writes to these addresses won't actually appear on the + * local bus, and so the PIXIS won't see them. + * + * In FCM mode, writes go to the NAND controller, which does not pass + * them to the localbus directly. So we force BR0 and BR1 into GPCM + * mode, since we don't care about what's behind the localbus any + * more. + */ + br0 = in_be32(&lbc->bank[0].br); + br1 = in_be32(&lbc->bank[1].br); + or0 = in_be32(&lbc->bank[0].or); + or1 = in_be32(&lbc->bank[1].or); + + /* Make sure CS0 and CS1 are programmed */ + if (!(br0 & BR_V) || !(br1 & BR_V)) { + pr_err("p1022ds: CS0 and/or CS1 is not programmed\n"); + goto exit; + } + + /* + * Use the existing BRx/ORx values if it's already GPCM. Otherwise, + * force the values to simple 32KB GPCM windows with the most + * conservative timing. + */ + if ((br0 & BR_MSEL) != BR_MS_GPCM) { + br0 = (br0 & BR_BA) | BR_V; + or0 = 0xFFFF8000 | 0xFF7; + out_be32(&lbc->bank[0].br, br0); + out_be32(&lbc->bank[0].or, or0); + } + if ((br1 & BR_MSEL) != BR_MS_GPCM) { + br1 = (br1 & BR_BA) | BR_V; + or1 = 0xFFFF8000 | 0xFF7; + out_be32(&lbc->bank[1].br, br1); + out_be32(&lbc->bank[1].or, or1); } - brdcfg1 = pixis + 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */ + + cs0_addr = lbc_br_to_phys(ecm, num_laws, br0); + if (!cs0_addr) { + pr_err("p1022ds: could not determine physical address for CS0" + " (BR0=%08x)\n", br0); + goto exit; + } + cs1_addr = lbc_br_to_phys(ecm, num_laws, br1); + if (!cs1_addr) { + pr_err("p1022ds: could not determine physical address for CS1" + " (BR1=%08x)\n", br1); + goto exit; + } + + lbc_lcs0_ba = ioremap(cs0_addr, 1); + if (!lbc_lcs0_ba) { + pr_err("p1022ds: could not ioremap CS0 address %llx\n", + (unsigned long long)cs0_addr); + goto exit; + } + lbc_lcs1_ba = ioremap(cs1_addr, 1); + if (!lbc_lcs1_ba) { + pr_err("p1022ds: could not ioremap CS1 address %llx\n", + (unsigned long long)cs1_addr); + goto exit; + } + + /* Make sure we're in indirect mode first. */ + if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) != + PMUXCR_ELBCDIU_DIU) { + struct device_node *pixis_node; + void __iomem *pixis; + + pixis_node = + of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga"); + if (!pixis_node) { + pr_err("p1022ds: missing pixis node\n"); + goto exit; + } + + pixis = of_iomap(pixis_node, 0); + of_node_put(pixis_node); + if (!pixis) { + pr_err("p1022ds: could not map pixis registers\n"); + goto exit; + } + + /* Enable indirect PIXIS mode. */ + setbits8(pixis + PX_CTL, PX_CTL_ALTACC); + iounmap(pixis); + + /* Switch the board mux to the DIU */ + out_8(lbc_lcs0_ba, PX_BRDCFG0); /* BRDCFG0 */ + b = in_8(lbc_lcs1_ba); + b |= PX_BRDCFG0_ELBC_DIU; + out_8(lbc_lcs1_ba, b); + + /* Set the chip mux to DIU mode. */ + clrsetbits_be32(&guts->pmuxcr, PMUXCR_ELBCDIU_MASK, + PMUXCR_ELBCDIU_DIU); + in_be32(&guts->pmuxcr); + } + switch (port) { case FSL_DIU_PORT_DVI: - printk(KERN_INFO "%s:%u\n", __func__, __LINE__); /* Enable the DVI port, disable the DFP and the backlight */ - clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT, - PX_BRDCFG1_DVIEN); + out_8(lbc_lcs0_ba, PX_BRDCFG1); + b = in_8(lbc_lcs1_ba); + b &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT); + b |= PX_BRDCFG1_DVIEN; + out_8(lbc_lcs1_ba, b); break; case FSL_DIU_PORT_LVDS: - printk(KERN_INFO "%s:%u\n", __func__, __LINE__); + /* + * LVDS also needs backlight enabled, otherwise the display + * will be blank. + */ /* Enable the DFP port, disable the DVI and the backlight */ - clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT, - PX_BRDCFG1_DFPEN); + out_8(lbc_lcs0_ba, PX_BRDCFG1); + b = in_8(lbc_lcs1_ba); + b &= ~PX_BRDCFG1_DVIEN; + b |= PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT; + out_8(lbc_lcs1_ba, b); break; default: pr_err("p1022ds: unsupported monitor port %i\n", port); } - iounmap(pixis); +exit: + if (lbc_lcs1_ba) + iounmap(lbc_lcs1_ba); + if (lbc_lcs0_ba) + iounmap(lbc_lcs0_ba); + if (lbc) + iounmap(lbc); + if (ecm) + iounmap(ecm); + if (guts) + iounmap(guts); + + of_node_put(law_node); + of_node_put(lbc_node); + of_node_put(guts_node); } /** @@ -181,7 +372,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) void p1022ds_set_pixel_clock(unsigned int pixclock) { struct device_node *guts_np = NULL; - struct ccsr_guts_85xx __iomem *guts; + struct ccsr_guts __iomem *guts; unsigned long freq; u64 temp; u32 pxclk; @@ -189,14 +380,14 @@ void p1022ds_set_pixel_clock(unsigned int pixclock) /* Map the global utilities registers. */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); if (!guts_np) { - pr_err("p1022ds: missing global utilties device node\n"); + pr_err("p1022ds: missing global utilities device node\n"); return; } guts = of_iomap(guts_np, 0); of_node_put(guts_np); if (!guts) { - pr_err("p1022ds: could not map global utilties device\n"); + pr_err("p1022ds: could not map global utilities device\n"); return; } @@ -242,79 +433,120 @@ p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port) void __init p1022_ds_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); } +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + +/* TRUE if there is a "video=fslfb" command-line parameter. */ +static bool fslfb; + /* - * Setup the architecture + * Search for a "video=fslfb" command-line parameter, and set 'fslfb' to + * true if we find it. + * + * We need to use early_param() instead of __setup() because the normal + * __setup() gets called to late. However, early_param() gets called very + * early, before the device tree is unflattened, so all we can do now is set a + * global variable. Later on, p1022_ds_setup_arch() will use that variable + * to determine if we need to update the device tree. */ -static void __init p1022_ds_setup_arch(void) +static int __init early_video_setup(char *options) { -#ifdef CONFIG_PCI - struct device_node *np; + fslfb = (strncmp(options, "fslfb:", 6) == 0); + + return 0; +} +early_param("video", early_video_setup); + #endif - dma_addr_t max = 0xffffffff; +/* + * Setup the architecture + */ +static void __init p1022_ds_setup_arch(void) +{ if (ppc_md.progress) ppc_md.progress("p1022_ds_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,p1022-pcie") { - struct resource rsrc; - struct pci_controller *hose; - - of_address_to_resource(np, 0, &rsrc); - - if ((rsrc.start & 0xfffff) == 0x8000) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); - - hose = pci_find_hose_for_OF_device(np); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); - } -#endif - #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - diu_ops.get_pixel_format = p1022ds_get_pixel_format; - diu_ops.set_gamma_table = p1022ds_set_gamma_table; diu_ops.set_monitor_port = p1022ds_set_monitor_port; diu_ops.set_pixel_clock = p1022ds_set_pixel_clock; diu_ops.valid_monitor_port = p1022ds_valid_monitor_port; -#endif - mpc85xx_smp_init(); + /* + * Disable the NOR and NAND flash nodes if there is video=fslfb... + * command-line parameter. When the DIU is active, the localbus is + * unavailable, so we have to disable these nodes before the MTD + * driver loads. + */ + if (fslfb) { + struct device_node *np = + of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc"); + + if (np) { + struct device_node *np2; + + of_node_get(np); + np2 = of_find_compatible_node(np, NULL, "cfi-flash"); + if (np2) { + static struct property nor_status = { + .name = "status", + .value = "disabled", + .length = sizeof("disabled"), + }; + + /* + * of_update_property() is called before + * kmalloc() is available, so the 'new' object + * should be allocated in the global area. + * The easiest way is to do that is to + * allocate one static local variable for each + * call to this function. + */ + pr_info("p1022ds: disabling %s node", + np2->full_name); + of_update_property(np2, &nor_status); + of_node_put(np2); + } + + of_node_get(np); + np2 = of_find_compatible_node(np, NULL, + "fsl,elbc-fcm-nand"); + if (np2) { + static struct property nand_status = { + .name = "status", + .value = "disabled", + .length = sizeof("disabled"), + }; + + pr_info("p1022ds: disabling %s node", + np2->full_name); + of_update_property(np2, &nand_status); + of_node_put(np2); + } + + of_node_put(np); + } -#ifdef CONFIG_SWIOTLB - if (memblock_end_of_DRAM() > max) { - ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_dma_ops); - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } + #endif - pr_info("Freescale P1022 DS reference board\n"); -} + mpc85xx_smp_init(); -static struct of_device_id __initdata p1022_ds_ids[] = { - /* So that the DMA channel nodes can be probed individually: */ - { .compatible = "fsl,eloplus-dma", }, - {}, -}; + fsl_pci_assign_primary(); -static int __init p1022_ds_publish_devices(void) -{ - mpc85xx_common_publish_devices(); - return of_platform_bus_probe(NULL, p1022_ds_ids, NULL); + swiotlb_detect_4g(); + + pr_info("Freescale P1022 DS reference board\n"); } -machine_device_initcall(p1022_ds, p1022_ds_publish_devices); + +machine_arch_initcall(p1022_ds, mpc85xx_common_publish_devices); machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier); @@ -335,6 +567,7 @@ define_machine(p1022_ds) { .init_IRQ = p1022_ds_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c new file mode 100644 index 00000000000..7a180f0308d --- /dev/null +++ b/arch/powerpc/platforms/85xx/p1022_rdk.c @@ -0,0 +1,156 @@ +/* + * P1022 RDK board specific routines + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Author: Timur Tabi <timur@freescale.com> + * + * Based on p1022_ds.c + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/pci.h> +#include <linux/of_platform.h> +#include <asm/div64.h> +#include <asm/mpic.h> +#include <asm/swiotlb.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <asm/udbg.h> +#include <asm/fsl_guts.h> +#include "smp.h" + +#include "mpc85xx.h" + +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + +/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */ +#define CLKDVDR_PXCKEN 0x80000000 +#define CLKDVDR_PXCKINV 0x10000000 +#define CLKDVDR_PXCKDLY 0x06000000 +#define CLKDVDR_PXCLK_MASK 0x00FF0000 + +/** + * p1022rdk_set_pixel_clock: program the DIU's clock + * + * @pixclock: the wavelength, in picoseconds, of the clock + */ +void p1022rdk_set_pixel_clock(unsigned int pixclock) +{ + struct device_node *guts_np = NULL; + struct ccsr_guts __iomem *guts; + unsigned long freq; + u64 temp; + u32 pxclk; + + /* Map the global utilities registers. */ + guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); + if (!guts_np) { + pr_err("p1022rdk: missing global utilties device node\n"); + return; + } + + guts = of_iomap(guts_np, 0); + of_node_put(guts_np); + if (!guts) { + pr_err("p1022rdk: could not map global utilties device\n"); + return; + } + + /* Convert pixclock from a wavelength to a frequency */ + temp = 1000000000000ULL; + do_div(temp, pixclock); + freq = temp; + + /* + * 'pxclk' is the ratio of the platform clock to the pixel clock. + * This number is programmed into the CLKDVDR register, and the valid + * range of values is 2-255. + */ + pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq); + pxclk = clamp_t(u32, pxclk, 2, 255); + + /* Disable the pixel clock, and set it to non-inverted and no delay */ + clrbits32(&guts->clkdvdr, + CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK); + + /* Enable the clock and set the pxclk */ + setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16)); + + iounmap(guts); +} + +/** + * p1022rdk_valid_monitor_port: set the monitor port for sysfs + */ +enum fsl_diu_monitor_port +p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port) +{ + return FSL_DIU_PORT_DVI; +} + +#endif + +void __init p1022_rdk_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init p1022_rdk_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("p1022_rdk_setup_arch()", 0); + +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + diu_ops.set_pixel_clock = p1022rdk_set_pixel_clock; + diu_ops.valid_monitor_port = p1022rdk_valid_monitor_port; +#endif + + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); + + swiotlb_detect_4g(); + + pr_info("Freescale / iVeia P1022 RDK reference board\n"); +} + +machine_arch_initcall(p1022_rdk, mpc85xx_common_publish_devices); + +machine_arch_initcall(p1022_rdk, swiotlb_setup_bus_notifier); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p1022_rdk_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,p1022rdk"); +} + +define_machine(p1022_rdk) { + .name = "P1022 RDK", + .probe = p1022_rdk_probe, + .setup_arch = p1022_rdk_setup_arch, + .init_IRQ = p1022_rdk_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rdb.c index d951e7027bb..d5b7509825d 100644 --- a/arch/powerpc/platforms/85xx/p1023_rds.c +++ b/arch/powerpc/platforms/85xx/p1023_rdb.c @@ -1,10 +1,10 @@ /* - * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc. * * Author: Roy Zang <tie-fei.zang@freescale.com> * * Description: - * P1023 RDS Board Setup + * P1023 RDB Board Setup * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -22,7 +22,6 @@ #include <linux/of_platform.h> #include <linux/of_device.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -42,12 +41,12 @@ * Setup the architecture * */ -static void __init mpc85xx_rds_setup_arch(void) +static void __init mpc85xx_rdb_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("p1023_rds_setup_arch()", 0); + ppc_md.progress("p1023_rdb_setup_arch()", 0); /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); @@ -81,21 +80,17 @@ static void __init mpc85xx_rds_setup_arch(void) } } -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,p1023-pcie") - fsl_add_bridge(np, 0); -#endif - mpc85xx_smp_init(); + + fsl_pci_assign_primary(); } -machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices); +machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices); -static void __init mpc85xx_rds_pic_init(void) +static void __init mpc85xx_rdb_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); @@ -103,25 +98,25 @@ static void __init mpc85xx_rds_pic_init(void) mpic_init(mpic); } -static int __init p1023_rds_probe(void) +static int __init p1023_rdb_probe(void) { unsigned long root = of_get_flat_dt_root(); - return of_flat_dt_is_compatible(root, "fsl,P1023RDS"); + return of_flat_dt_is_compatible(root, "fsl,P1023RDB"); } -define_machine(p1023_rds) { - .name = "P1023 RDS", - .probe = p1023_rds_probe, - .setup_arch = mpc85xx_rds_setup_arch, - .init_IRQ = mpc85xx_rds_pic_init, +define_machine(p1023_rdb) { + .name = "P1023 RDB", + .probe = p1023_rdb_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif }; - diff --git a/arch/powerpc/platforms/85xx/p2041_rdb.c b/arch/powerpc/platforms/85xx/p2041_rdb.c deleted file mode 100644 index eda6ed5683e..00000000000 --- a/arch/powerpc/platforms/85xx/p2041_rdb.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * P2041 RDB Setup - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/phy.h> - -#include <asm/system.h> -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <mm/mmu_decl.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/mpic.h> - -#include <linux/of_platform.h> -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> -#include <asm/ehv_pic.h> - -#include "corenet_ds.h" - -/* - * Called very early, device-tree isn't unflattened - */ -static int __init p2041_rdb_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); -#ifdef CONFIG_SMP - extern struct smp_ops_t smp_85xx_ops; -#endif - - if (of_flat_dt_is_compatible(root, "fsl,P2041RDB")) - return 1; - - /* Check if we're running under the Freescale hypervisor */ - if (of_flat_dt_is_compatible(root, "fsl,P2041RDB-hv")) { - ppc_md.init_IRQ = ehv_pic_init; - ppc_md.get_irq = ehv_pic_get_irq; - ppc_md.restart = fsl_hv_restart; - ppc_md.power_off = fsl_hv_halt; - ppc_md.halt = fsl_hv_halt; -#ifdef CONFIG_SMP - /* - * Disable the timebase sync operations because we can't write - * to the timebase registers under the hypervisor. - */ - smp_85xx_ops.give_timebase = NULL; - smp_85xx_ops.take_timebase = NULL; -#endif - return 1; - } - - return 0; -} - -define_machine(p2041_rdb) { - .name = "P2041 RDB", - .probe = p2041_rdb_probe, - .setup_arch = corenet_ds_setup_arch, - .init_IRQ = corenet_ds_pic_init, -#ifdef CONFIG_PCI - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, -#endif - .get_irq = mpic_get_coreint_irq, - .restart = fsl_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, - .power_save = e500_idle, -}; - -machine_device_initcall(p2041_rdb, corenet_ds_publish_devices); - -#ifdef CONFIG_SWIOTLB -machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier); -#endif diff --git a/arch/powerpc/platforms/85xx/p3041_ds.c b/arch/powerpc/platforms/85xx/p3041_ds.c deleted file mode 100644 index 96d99a374dc..00000000000 --- a/arch/powerpc/platforms/85xx/p3041_ds.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * P3041 DS Setup - * - * Maintained by Kumar Gala (see MAINTAINERS for contact information) - * - * Copyright 2009-2010 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/phy.h> - -#include <asm/system.h> -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <mm/mmu_decl.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/mpic.h> - -#include <linux/of_platform.h> -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> -#include <asm/ehv_pic.h> - -#include "corenet_ds.h" - -/* - * Called very early, device-tree isn't unflattened - */ -static int __init p3041_ds_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); -#ifdef CONFIG_SMP - extern struct smp_ops_t smp_85xx_ops; -#endif - - if (of_flat_dt_is_compatible(root, "fsl,P3041DS")) - return 1; - - /* Check if we're running under the Freescale hypervisor */ - if (of_flat_dt_is_compatible(root, "fsl,P3041DS-hv")) { - ppc_md.init_IRQ = ehv_pic_init; - ppc_md.get_irq = ehv_pic_get_irq; - ppc_md.restart = fsl_hv_restart; - ppc_md.power_off = fsl_hv_halt; - ppc_md.halt = fsl_hv_halt; -#ifdef CONFIG_SMP - /* - * Disable the timebase sync operations because we can't write - * to the timebase registers under the hypervisor. - */ - smp_85xx_ops.give_timebase = NULL; - smp_85xx_ops.take_timebase = NULL; -#endif - return 1; - } - - return 0; -} - -define_machine(p3041_ds) { - .name = "P3041 DS", - .probe = p3041_ds_probe, - .setup_arch = corenet_ds_setup_arch, - .init_IRQ = corenet_ds_pic_init, -#ifdef CONFIG_PCI - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, -#endif - .get_irq = mpic_get_coreint_irq, - .restart = fsl_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, - .power_save = e500_idle, -}; - -machine_device_initcall(p3041_ds, corenet_ds_publish_devices); - -#ifdef CONFIG_SWIOTLB -machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier); -#endif diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c deleted file mode 100644 index 081cf4ac188..00000000000 --- a/arch/powerpc/platforms/85xx/p3060_qds.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * P3060 QDS Setup - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/phy.h> -#include <asm/machdep.h> -#include <asm/udbg.h> -#include <asm/mpic.h> -#include <linux/of_platform.h> -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> -#include <asm/ehv_pic.h> -#include "corenet_ds.h" - -/* - * Called very early, device-tree isn't unflattened - */ -static int __init p3060_qds_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); -#ifdef CONFIG_SMP - extern struct smp_ops_t smp_85xx_ops; -#endif - - if (of_flat_dt_is_compatible(root, "fsl,P3060QDS")) - return 1; - - /* Check if we're running under the Freescale hypervisor */ - if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) { - ppc_md.init_IRQ = ehv_pic_init; - ppc_md.get_irq = ehv_pic_get_irq; - ppc_md.restart = fsl_hv_restart; - ppc_md.power_off = fsl_hv_halt; - ppc_md.halt = fsl_hv_halt; -#ifdef CONFIG_SMP - /* - * Disable the timebase sync operations because we can't write - * to the timebase registers under the hypervisor. - */ - smp_85xx_ops.give_timebase = NULL; - smp_85xx_ops.take_timebase = NULL; -#endif - return 1; - } - - return 0; -} - -define_machine(p3060_qds) { - .name = "P3060 QDS", - .probe = p3060_qds_probe, - .setup_arch = corenet_ds_setup_arch, - .init_IRQ = corenet_ds_pic_init, -#ifdef CONFIG_PCI - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, -#endif - .get_irq = mpic_get_coreint_irq, - .restart = fsl_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, - .power_save = e500_idle, -}; - -machine_device_initcall(p3060_qds, corenet_ds_publish_devices); - -#ifdef CONFIG_SWIOTLB -machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier); -#endif diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c deleted file mode 100644 index d1b21d7663e..00000000000 --- a/arch/powerpc/platforms/85xx/p4080_ds.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * P4080 DS Setup - * - * Maintained by Kumar Gala (see MAINTAINERS for contact information) - * - * Copyright 2009 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/delay.h> -#include <linux/interrupt.h> - -#include <asm/system.h> -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <mm/mmu_decl.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/mpic.h> - -#include <linux/of_platform.h> -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> -#include <asm/ehv_pic.h> - -#include "corenet_ds.h" - -/* - * Called very early, device-tree isn't unflattened - */ -static int __init p4080_ds_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); -#ifdef CONFIG_SMP - extern struct smp_ops_t smp_85xx_ops; -#endif - - if (of_flat_dt_is_compatible(root, "fsl,P4080DS")) - return 1; - - /* Check if we're running under the Freescale hypervisor */ - if (of_flat_dt_is_compatible(root, "fsl,P4080DS-hv")) { - ppc_md.init_IRQ = ehv_pic_init; - ppc_md.get_irq = ehv_pic_get_irq; - ppc_md.restart = fsl_hv_restart; - ppc_md.power_off = fsl_hv_halt; - ppc_md.halt = fsl_hv_halt; -#ifdef CONFIG_SMP - /* - * Disable the timebase sync operations because we can't write - * to the timebase registers under the hypervisor. - */ - smp_85xx_ops.give_timebase = NULL; - smp_85xx_ops.take_timebase = NULL; -#endif - return 1; - } - - return 0; -} - -define_machine(p4080_ds) { - .name = "P4080 DS", - .probe = p4080_ds_probe, - .setup_arch = corenet_ds_setup_arch, - .init_IRQ = corenet_ds_pic_init, -#ifdef CONFIG_PCI - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, -#endif - .get_irq = mpic_get_coreint_irq, - .restart = fsl_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, - .power_save = e500_idle, -}; - -machine_device_initcall(p4080_ds, corenet_ds_publish_devices); -#ifdef CONFIG_SWIOTLB -machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier); -#endif diff --git a/arch/powerpc/platforms/85xx/p5020_ds.c b/arch/powerpc/platforms/85xx/p5020_ds.c deleted file mode 100644 index e8cba5004fd..00000000000 --- a/arch/powerpc/platforms/85xx/p5020_ds.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * P5020 DS Setup - * - * Maintained by Kumar Gala (see MAINTAINERS for contact information) - * - * Copyright 2009-2010 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/phy.h> - -#include <asm/system.h> -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <mm/mmu_decl.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/mpic.h> - -#include <linux/of_platform.h> -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> -#include <asm/ehv_pic.h> - -#include "corenet_ds.h" - -/* - * Called very early, device-tree isn't unflattened - */ -static int __init p5020_ds_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); -#ifdef CONFIG_SMP - extern struct smp_ops_t smp_85xx_ops; -#endif - - if (of_flat_dt_is_compatible(root, "fsl,P5020DS")) - return 1; - - /* Check if we're running under the Freescale hypervisor */ - if (of_flat_dt_is_compatible(root, "fsl,P5020DS-hv")) { - ppc_md.init_IRQ = ehv_pic_init; - ppc_md.get_irq = ehv_pic_get_irq; - ppc_md.restart = fsl_hv_restart; - ppc_md.power_off = fsl_hv_halt; - ppc_md.halt = fsl_hv_halt; -#ifdef CONFIG_SMP - /* - * Disable the timebase sync operations because we can't write - * to the timebase registers under the hypervisor. - */ - smp_85xx_ops.give_timebase = NULL; - smp_85xx_ops.take_timebase = NULL; -#endif - return 1; - } - - return 0; -} - -define_machine(p5020_ds) { - .name = "P5020 DS", - .probe = p5020_ds_probe, - .setup_arch = corenet_ds_setup_arch, - .init_IRQ = corenet_ds_pic_init, -#ifdef CONFIG_PCI - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, -#endif -/* coreint doesn't play nice with lazy EE, use legacy mpic for now */ -#ifdef CONFIG_PPC64 - .get_irq = mpic_get_irq, -#else - .get_irq = mpic_get_coreint_irq, -#endif - .restart = fsl_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -#ifdef CONFIG_PPC64 - .power_save = book3e_idle, -#else - .power_save = e500_idle, -#endif -}; - -machine_device_initcall(p5020_ds, corenet_ds_publish_devices); - -#ifdef CONFIG_SWIOTLB -machine_arch_initcall(p5020_ds, swiotlb_setup_bus_notifier); -#endif diff --git a/arch/powerpc/platforms/85xx/ppa8548.c b/arch/powerpc/platforms/85xx/ppa8548.c new file mode 100644 index 00000000000..3daff7c6356 --- /dev/null +++ b/arch/powerpc/platforms/85xx/ppa8548.c @@ -0,0 +1,99 @@ +/* + * ppa8548 setup and early boot code. + * + * Copyright 2009 Prodrive B.V.. + * + * By Stef van Os (see MAINTAINERS for contact information) + * + * Based on the SBC8548 support - Copyright 2007 Wind River Systems Inc. + * Based on the MPC8548CDS support - Copyright 2005 Freescale Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/reboot.h> +#include <linux/seq_file.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> + +static void __init ppa8548_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init ppa8548_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("ppa8548_setup_arch()", 0); +} + +static void ppa8548_show_cpuinfo(struct seq_file *m) +{ + uint32_t svid, phid1; + + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Prodrive B.V.\n"); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .type = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + { .compatible = "fsl,srio", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ppa8548, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ppa8548_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ppa8548"); +} + +define_machine(ppa8548) { + .name = "ppa8548", + .probe = ppa8548_probe, + .setup_arch = ppa8548_setup_arch, + .init_IRQ = ppa8548_pic_init, + .show_cpuinfo = ppa8548_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c new file mode 100644 index 00000000000..7f267329354 --- /dev/null +++ b/arch/powerpc/platforms/85xx/qemu_e500.c @@ -0,0 +1,75 @@ +/* + * Paravirt target for a generic QEMU e500 machine + * + * This is intended to be a flexible device-tree-driven platform, not fixed + * to a particular piece of hardware or a particular spec of virtual hardware, + * beyond the assumption of an e500-family CPU. Some things are still hardcoded + * here, such as MPIC, but this is a limitation of the current code rather than + * an interface contract with QEMU. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/of_fdt.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" +#include "mpc85xx.h" + +void __init qemu_e500_pic_init(void) +{ + struct mpic *mpic; + unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU | + MPIC_ENABLE_COREINT; + + mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +static void __init qemu_e500_setup_arch(void) +{ + ppc_md.progress("qemu_e500_setup_arch()", 0); + + fsl_pci_assign_primary(); + swiotlb_detect_4g(); + mpc85xx_smp_init(); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init qemu_e500_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500"); +} + +machine_arch_initcall(qemu_e500, mpc85xx_common_publish_devices); + +define_machine(qemu_e500) { + .name = "QEMU e500", + .probe = qemu_e500_probe, + .setup_arch = qemu_e500_setup_arch, + .init_IRQ = qemu_e500_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_coreint_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c index 184a5078461..b07214666d6 100644 --- a/arch/powerpc/platforms/85xx/sbc8548.c +++ b/arch/powerpc/platforms/85xx/sbc8548.c @@ -30,7 +30,6 @@ #include <linux/fsl_devices.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/pgtable.h> #include <asm/page.h> #include <linux/atomic.h> @@ -54,8 +53,7 @@ static int sbc_rev; static void __init sbc8548_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -90,26 +88,11 @@ static int __init sbc8548_hw_rev(void) */ static void __init sbc8548_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("sbc8548_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie")) { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == 0x8000) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); - } - } -#endif + fsl_pci_assign_primary(); + sbc_rev = sbc8548_hw_rev(); } @@ -130,7 +113,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } -machine_device_initcall(sbc8548, mpc85xx_common_publish_devices); +machine_arch_initcall(sbc8548, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -152,6 +135,7 @@ define_machine(sbc8548) { .restart = fsl_rstcr_restart, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c deleted file mode 100644 index 940752e9305..00000000000 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * Wind River SBC8560 setup and early boot code. - * - * Copyright 2007 Wind River Systems Inc. - * - * By Paul Gortmaker (see MAINTAINERS for contact information) - * - * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/of_platform.h> - -#include <asm/system.h> -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/mpic.h> -#include <mm/mmu_decl.h> -#include <asm/udbg.h> - -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> - -#include "mpc85xx.h" - -#ifdef CONFIG_CPM2 -#include <asm/cpm2.h> -#include <sysdev/cpm2_pic.h> -#endif - -static void __init sbc8560_pic_init(void) -{ - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 0, 256, " OpenPIC "); - BUG_ON(mpic == NULL); - mpic_init(mpic); - - mpc85xx_cpm2_pic_init(); -} - -/* - * Setup the architecture - */ -#ifdef CONFIG_CPM2 -struct cpm_pin { - int port, pin, flags; -}; - -static const struct cpm_pin sbc8560_pins[] = { - /* SCC1 */ - {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, - {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - - /* SCC2 */ - {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - - /* FCC2 */ - {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, - {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */ - {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */ - - /* FCC3 */ - {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */ - {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */ -}; - -static void __init init_ioports(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) { - const struct cpm_pin *pin = &sbc8560_pins[i]; - cpm2_set_pin(pin->port, pin->pin, pin->flags); - } - - cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX); -} -#endif - -static void __init sbc8560_setup_arch(void) -{ -#ifdef CONFIG_PCI - struct device_node *np; -#endif - - if (ppc_md.progress) - ppc_md.progress("sbc8560_setup_arch()", 0); - -#ifdef CONFIG_CPM2 - cpm2_reset(); - init_ioports(); -#endif - -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8540-pci") - fsl_add_bridge(np, 1); -#endif -} - -static void sbc8560_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Wind River\n"); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); -} - -machine_device_initcall(sbc8560, mpc85xx_common_publish_devices); - -/* - * Called very early, device-tree isn't unflattened - */ -static int __init sbc8560_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - return of_flat_dt_is_compatible(root, "SBC8560"); -} - -#ifdef CONFIG_RTC_DRV_M48T59 -static int __init sbc8560_rtc_init(void) -{ - struct device_node *np; - struct resource res; - struct platform_device *rtc_dev; - - np = of_find_compatible_node(NULL, NULL, "m48t59"); - if (np == NULL) { - printk("No RTC in DTB. Has it been eaten by wild dogs?\n"); - return -ENODEV; - } - - of_address_to_resource(np, 0, &res); - of_node_put(np); - - printk("Found RTC (m48t59) at i/o 0x%x\n", res.start); - - rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1); - - if (IS_ERR(rtc_dev)) { - printk("Registering sbc8560 RTC device failed\n"); - return PTR_ERR(rtc_dev); - } - - return 0; -} - -arch_initcall(sbc8560_rtc_init); - -#endif /* M48T59 */ - -static __u8 __iomem *brstcr; - -static int __init sbc8560_bdrstcr_init(void) -{ - struct device_node *np; - struct resource res; - - np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr"); - if (np == NULL) { - printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n"); - return -ENODEV; - } - - of_address_to_resource(np, 0, &res); - - printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res); - - brstcr = ioremap(res.start, resource_size(&res)); - if(!brstcr) - printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n"); - - of_node_put(np); - - return 0; -} - -arch_initcall(sbc8560_bdrstcr_init); - -void sbc8560_rstcr_restart(char * cmd) -{ - local_irq_disable(); - if(brstcr) - clrbits8(brstcr, 0x80); - - while(1); -} - -define_machine(sbc8560) { - .name = "SBC8560", - .probe = sbc8560_probe, - .setup_arch = sbc8560_setup_arch, - .init_IRQ = sbc8560_pic_init, - .show_cpuinfo = sbc8560_show_cpuinfo, - .get_irq = mpic_get_irq, - .restart = sbc8560_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c new file mode 100644 index 00000000000..bb75add6708 --- /dev/null +++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c @@ -0,0 +1,176 @@ +/* + * Servergy CTS-1000 Setup + * + * Maintained by Ben Collins <ben.c@servergy.com> + * + * Copyright 2012 by Servergy, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/platform_device.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> +#include <linux/workqueue.h> +#include <linux/reboot.h> +#include <linux/interrupt.h> + +#include <asm/machdep.h> + +static struct device_node *halt_node; + +static struct of_device_id child_match[] = { + { + .compatible = "sgy,gpio-halt", + }, + {}, +}; + +static void gpio_halt_wfn(struct work_struct *work) +{ + /* Likely wont return */ + orderly_poweroff(true); +} +static DECLARE_WORK(gpio_halt_wq, gpio_halt_wfn); + +static void gpio_halt_cb(void) +{ + enum of_gpio_flags flags; + int trigger, gpio; + + if (!halt_node) + return; + + gpio = of_get_gpio_flags(halt_node, 0, &flags); + + if (!gpio_is_valid(gpio)) + return; + + trigger = (flags == OF_GPIO_ACTIVE_LOW); + + printk(KERN_INFO "gpio-halt: triggering GPIO.\n"); + + /* Probably wont return */ + gpio_set_value(gpio, trigger); +} + +/* This IRQ means someone pressed the power button and it is waiting for us + * to handle the shutdown/poweroff. */ +static irqreturn_t gpio_halt_irq(int irq, void *__data) +{ + printk(KERN_INFO "gpio-halt: shutdown due to power button IRQ.\n"); + schedule_work(&gpio_halt_wq); + + return IRQ_HANDLED; +}; + +static int gpio_halt_probe(struct platform_device *pdev) +{ + enum of_gpio_flags flags; + struct device_node *node = pdev->dev.of_node; + int gpio, err, irq; + int trigger; + + if (!node) + return -ENODEV; + + /* If there's no matching child, this isn't really an error */ + halt_node = of_find_matching_node(node, child_match); + if (!halt_node) + return 0; + + /* Technically we could just read the first one, but punish + * DT writers for invalid form. */ + if (of_gpio_count(halt_node) != 1) + return -EINVAL; + + /* Get the gpio number relative to the dynamic base. */ + gpio = of_get_gpio_flags(halt_node, 0, &flags); + if (!gpio_is_valid(gpio)) + return -EINVAL; + + err = gpio_request(gpio, "gpio-halt"); + if (err) { + printk(KERN_ERR "gpio-halt: error requesting GPIO %d.\n", + gpio); + halt_node = NULL; + return err; + } + + trigger = (flags == OF_GPIO_ACTIVE_LOW); + + gpio_direction_output(gpio, !trigger); + + /* Now get the IRQ which tells us when the power button is hit */ + irq = irq_of_parse_and_map(halt_node, 0); + err = request_irq(irq, gpio_halt_irq, IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "gpio-halt", halt_node); + if (err) { + printk(KERN_ERR "gpio-halt: error requesting IRQ %d for " + "GPIO %d.\n", irq, gpio); + gpio_free(gpio); + halt_node = NULL; + return err; + } + + /* Register our halt function */ + ppc_md.halt = gpio_halt_cb; + ppc_md.power_off = gpio_halt_cb; + + printk(KERN_INFO "gpio-halt: registered GPIO %d (%d trigger, %d" + " irq).\n", gpio, trigger, irq); + + return 0; +} + +static int gpio_halt_remove(struct platform_device *pdev) +{ + if (halt_node) { + int gpio = of_get_gpio(halt_node, 0); + int irq = irq_of_parse_and_map(halt_node, 0); + + free_irq(irq, halt_node); + + ppc_md.halt = NULL; + ppc_md.power_off = NULL; + + gpio_free(gpio); + + halt_node = NULL; + } + + return 0; +} + +static struct of_device_id gpio_halt_match[] = { + /* We match on the gpio bus itself and scan the children since they + * wont be matched against us. We know the bus wont match until it + * has been registered too. */ + { + .compatible = "fsl,qoriq-gpio", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, gpio_halt_match); + +static struct platform_driver gpio_halt_driver = { + .driver = { + .name = "gpio-halt", + .owner = THIS_MODULE, + .of_match_table = gpio_halt_match, + }, + .probe = gpio_halt_probe, + .remove = gpio_halt_remove, +}; + +module_platform_driver(gpio_halt_driver); + +MODULE_DESCRIPTION("Driver to support GPIO triggered system halt for Servergy CTS-1000 Systems."); +MODULE_VERSION("1.0"); +MODULE_AUTHOR("Ben Collins <ben.c@servergy.com>"); +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index ff4249044a3..ba093f55367 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -2,7 +2,7 @@ * Author: Andy Fleming <afleming@freescale.com> * Kumar Gala <galak@kernel.crashing.org> * - * Copyright 2006-2008, 2011 Freescale Semiconductor Inc. + * Copyright 2006-2008, 2011-2012 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -15,8 +15,10 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/kexec.h> #include <linux/highmem.h> +#include <linux/cpu.h> #include <asm/machdep.h> #include <asm/pgtable.h> @@ -24,33 +26,157 @@ #include <asm/mpic.h> #include <asm/cacheflush.h> #include <asm/dbell.h> +#include <asm/fsl_guts.h> +#include <asm/code-patching.h> #include <sysdev/fsl_soc.h> #include <sysdev/mpic.h> #include "smp.h" -extern void __early_start(void); - -#define BOOT_ENTRY_ADDR_UPPER 0 -#define BOOT_ENTRY_ADDR_LOWER 1 -#define BOOT_ENTRY_R3_UPPER 2 -#define BOOT_ENTRY_R3_LOWER 3 -#define BOOT_ENTRY_RESV 4 -#define BOOT_ENTRY_PIR 5 -#define BOOT_ENTRY_R6_UPPER 6 -#define BOOT_ENTRY_R6_LOWER 7 -#define NUM_BOOT_ENTRY 8 -#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32)) - -static int __init -smp_85xx_kick_cpu(int nr) +struct epapr_spin_table { + u32 addr_h; + u32 addr_l; + u32 r3_h; + u32 r3_l; + u32 reserved; + u32 pir; +}; + +static struct ccsr_guts __iomem *guts; +static u64 timebase; +static int tb_req; +static int tb_valid; + +static void mpc85xx_timebase_freeze(int freeze) +{ + uint32_t mask; + + mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1; + if (freeze) + setbits32(&guts->devdisr, mask); + else + clrbits32(&guts->devdisr, mask); + + in_be32(&guts->devdisr); +} + +static void mpc85xx_give_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + + while (!tb_req) + barrier(); + tb_req = 0; + + mpc85xx_timebase_freeze(1); +#ifdef CONFIG_PPC64 + /* + * e5500/e6500 have a workaround for erratum A-006958 in place + * that will reread the timebase until TBL is non-zero. + * That would be a bad thing when the timebase is frozen. + * + * Thus, we read it manually, and instead of checking that + * TBL is non-zero, we ensure that TB does not change. We don't + * do that for the main mftb implementation, because it requires + * a scratch register + */ + { + u64 prev; + + asm volatile("mfspr %0, %1" : "=r" (timebase) : + "i" (SPRN_TBRL)); + + do { + prev = timebase; + asm volatile("mfspr %0, %1" : "=r" (timebase) : + "i" (SPRN_TBRL)); + } while (prev != timebase); + } +#else + timebase = get_tb(); +#endif + mb(); + tb_valid = 1; + + while (tb_valid) + barrier(); + + mpc85xx_timebase_freeze(0); + + local_irq_restore(flags); +} + +static void mpc85xx_take_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + + tb_req = 1; + while (!tb_valid) + barrier(); + + set_tb(timebase >> 32, timebase & 0xffffffff); + isync(); + tb_valid = 0; + + local_irq_restore(flags); +} + +#ifdef CONFIG_HOTPLUG_CPU +static void smp_85xx_mach_cpu_die(void) +{ + unsigned int cpu = smp_processor_id(); + u32 tmp; + + local_irq_disable(); + idle_task_exit(); + generic_set_cpu_dead(cpu); + mb(); + + mtspr(SPRN_TCR, 0); + + __flush_disable_L1(); + tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP; + mtspr(SPRN_HID0, tmp); + isync(); + + /* Enter NAP mode. */ + tmp = mfmsr(); + tmp |= MSR_WE; + mb(); + mtmsr(tmp); + isync(); + + while (1) + ; +} +#endif + +static inline void flush_spin_table(void *spin_table) +{ + flush_dcache_range((ulong)spin_table, + (ulong)spin_table + sizeof(struct epapr_spin_table)); +} + +static inline u32 read_spin_table_addr_l(void *spin_table) +{ + flush_dcache_range((ulong)spin_table, + (ulong)spin_table + sizeof(struct epapr_spin_table)); + return in_be32(&((struct epapr_spin_table *)spin_table)->addr_l); +} + +static int smp_85xx_kick_cpu(int nr) { unsigned long flags; const u64 *cpu_rel_addr; - __iomem u32 *bptr_vaddr; + __iomem struct epapr_spin_table *spin_table; struct device_node *np; - int n = 0, hw_cpu = get_hard_smp_processor_id(nr); + int hw_cpu = get_hard_smp_processor_id(nr); int ioremappable; + int ret = 0; WARN_ON(nr < 0 || nr >= NR_CPUS); WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS); @@ -75,46 +201,92 @@ smp_85xx_kick_cpu(int nr) /* Map the spin table */ if (ioremappable) - bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY); + spin_table = ioremap_prot(*cpu_rel_addr, + sizeof(struct epapr_spin_table), _PAGE_COHERENT); else - bptr_vaddr = phys_to_virt(*cpu_rel_addr); + spin_table = phys_to_virt(*cpu_rel_addr); local_irq_save(flags); - - out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu); #ifdef CONFIG_PPC32 - out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start)); +#ifdef CONFIG_HOTPLUG_CPU + /* Corresponding to generic_set_cpu_dead() */ + generic_set_cpu_up(nr); + + if (system_state == SYSTEM_RUNNING) { + /* + * To keep it compatible with old boot program which uses + * cache-inhibit spin table, we need to flush the cache + * before accessing spin table to invalidate any staled data. + * We also need to flush the cache after writing to spin + * table to push data out. + */ + flush_spin_table(spin_table); + out_be32(&spin_table->addr_l, 0); + flush_spin_table(spin_table); + + /* + * We don't set the BPTR register here since it already points + * to the boot page properly. + */ + mpic_reset_core(nr); + + /* + * wait until core is ready... + * We need to invalidate the stale data, in case the boot + * loader uses a cache-inhibited spin table. + */ + if (!spin_event_timeout( + read_spin_table_addr_l(spin_table) == 1, + 10000, 100)) { + pr_err("%s: timeout waiting for core %d to reset\n", + __func__, hw_cpu); + ret = -ENOENT; + goto out; + } - if (!ioremappable) - flush_dcache_range((ulong)bptr_vaddr, - (ulong)(bptr_vaddr + SIZE_BOOT_ENTRY)); + /* clear the acknowledge status */ + __secondary_hold_acknowledge = -1; + } +#endif + flush_spin_table(spin_table); + out_be32(&spin_table->pir, hw_cpu); + out_be32(&spin_table->addr_l, __pa(__early_start)); + flush_spin_table(spin_table); /* Wait a bit for the CPU to ack. */ - while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000)) - mdelay(1); + if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu, + 10000, 100)) { + pr_err("%s: timeout waiting for core %d to ack\n", + __func__, hw_cpu); + ret = -ENOENT; + goto out; + } +out: #else smp_generic_kick_cpu(nr); - out_be64((u64 *)(bptr_vaddr + BOOT_ENTRY_ADDR_UPPER), - __pa((u64)*((unsigned long long *) generic_secondary_smp_init))); - - if (!ioremappable) - flush_dcache_range((ulong)bptr_vaddr, - (ulong)(bptr_vaddr + SIZE_BOOT_ENTRY)); + flush_spin_table(spin_table); + out_be32(&spin_table->pir, hw_cpu); + out_be64((u64 *)(&spin_table->addr_h), + __pa(ppc_function_entry(generic_secondary_smp_init))); + flush_spin_table(spin_table); #endif local_irq_restore(flags); if (ioremappable) - iounmap(bptr_vaddr); - - pr_debug("waited %d msecs for CPU #%d.\n", n, nr); + iounmap(spin_table); - return 0; + return ret; } struct smp_ops_t smp_85xx_ops = { .kick_cpu = smp_85xx_kick_cpu, + .cpu_bootable = smp_generic_cpu_bootable, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = generic_cpu_disable, + .cpu_die = generic_cpu_die, +#endif #ifdef CONFIG_KEXEC .give_timebase = smp_generic_give_timebase, .take_timebase = smp_generic_take_timebase, @@ -218,27 +390,40 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image) } #endif /* CONFIG_KEXEC */ -static void __init -smp_85xx_setup_cpu(int cpu_nr) +static void smp_85xx_basic_setup(int cpu_nr) { - if (smp_85xx_ops.probe == smp_mpic_probe) - mpic_setup_this_cpu(); - if (cpu_has_feature(CPU_FTR_DBELL)) doorbell_setup_this_cpu(); } +static void smp_85xx_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); + smp_85xx_basic_setup(cpu_nr); +} + +static const struct of_device_id mpc85xx_smp_guts_ids[] = { + { .compatible = "fsl,mpc8572-guts", }, + { .compatible = "fsl,p1020-guts", }, + { .compatible = "fsl,p1021-guts", }, + { .compatible = "fsl,p1022-guts", }, + { .compatible = "fsl,p1023-guts", }, + { .compatible = "fsl,p2020-guts", }, + {}, +}; + void __init mpc85xx_smp_init(void) { struct device_node *np; - smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; np = of_find_node_by_type(NULL, "open-pic"); if (np) { smp_85xx_ops.probe = smp_mpic_probe; + smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; smp_85xx_ops.message_pass = smp_mpic_message_pass; - } + } else + smp_85xx_ops.setup_cpu = smp_85xx_basic_setup; if (cpu_has_feature(CPU_FTR_DBELL)) { /* @@ -247,6 +432,23 @@ void __init mpc85xx_smp_init(void) */ smp_85xx_ops.message_pass = NULL; smp_85xx_ops.cause_ipi = doorbell_cause_ipi; + smp_85xx_ops.probe = NULL; + } + + np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids); + if (np) { + guts = of_iomap(np, 0); + of_node_put(np); + if (!guts) { + pr_err("%s: Could not map guts node address\n", + __func__); + return; + } + smp_85xx_ops.give_timebase = mpc85xx_give_timebase; + smp_85xx_ops.take_timebase = mpc85xx_take_timebase; +#ifdef CONFIG_HOTPLUG_CPU + ppc_md.cpu_die = smp_85xx_mach_cpu_die; +#endif } smp_ops = &smp_85xx_ops; diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c index 18f635906b2..ae368e0e107 100644 --- a/arch/powerpc/platforms/85xx/socrates.c +++ b/arch/powerpc/platforms/85xx/socrates.c @@ -29,7 +29,6 @@ #include <linux/seq_file.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -48,8 +47,7 @@ static void __init socrates_pic_init(void) { struct device_node *np; - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -68,20 +66,13 @@ static void __init socrates_pic_init(void) */ static void __init socrates_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("socrates_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8540-pci") - fsl_add_bridge(np, 1); -#endif + fsl_pci_assign_primary(); } -machine_device_initcall(socrates, mpc85xx_common_publish_devices); +machine_arch_initcall(socrates, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c index 12cb9bb2cc6..55a9682b952 100644 --- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c +++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c @@ -9,6 +9,8 @@ */ #include <linux/irq.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/io.h> @@ -51,7 +53,7 @@ static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = { static DEFINE_RAW_SPINLOCK(socrates_fpga_pic_lock); static void __iomem *socrates_fpga_pic_iobase; -static struct irq_host *socrates_fpga_pic_irq_host; +static struct irq_domain *socrates_fpga_pic_irq_host; static unsigned int socrates_fpga_irqs[3]; static inline uint32_t socrates_fpga_pic_read(int reg) @@ -227,7 +229,7 @@ static struct irq_chip socrates_fpga_pic_chip = { .irq_set_type = socrates_fpga_pic_set_type, }; -static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq, +static int socrates_fpga_pic_host_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hwirq) { /* All interrupts are LEVEL sensitive */ @@ -238,7 +240,7 @@ static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq, return 0; } -static int socrates_fpga_pic_host_xlate(struct irq_host *h, +static int socrates_fpga_pic_host_xlate(struct irq_domain *h, struct device_node *ct, const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { @@ -269,7 +271,7 @@ static int socrates_fpga_pic_host_xlate(struct irq_host *h, return 0; } -static struct irq_host_ops socrates_fpga_pic_host_ops = { +static const struct irq_domain_ops socrates_fpga_pic_host_ops = { .map = socrates_fpga_pic_host_map, .xlate = socrates_fpga_pic_host_xlate, }; @@ -279,10 +281,9 @@ void socrates_fpga_pic_init(struct device_node *pic) unsigned long flags; int i; - /* Setup an irq_host structure */ - socrates_fpga_pic_irq_host = irq_alloc_host(pic, IRQ_HOST_MAP_LINEAR, - SOCRATES_FPGA_NUM_IRQS, &socrates_fpga_pic_host_ops, - SOCRATES_FPGA_NUM_IRQS); + /* Setup an irq_domain structure */ + socrates_fpga_pic_irq_host = irq_domain_add_linear(pic, + SOCRATES_FPGA_NUM_IRQS, &socrates_fpga_pic_host_ops, NULL); if (socrates_fpga_pic_irq_host == NULL) { pr_err("FPGA PIC: Unable to allocate host\n"); return; diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c index e9e5234b4e7..6f4939b6309 100644 --- a/arch/powerpc/platforms/85xx/stx_gp3.c +++ b/arch/powerpc/platforms/85xx/stx_gp3.c @@ -28,7 +28,6 @@ #include <linux/seq_file.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -48,8 +47,7 @@ static void __init stx_gp3_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -62,21 +60,14 @@ static void __init stx_gp3_pic_init(void) */ static void __init stx_gp3_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("stx_gp3_setup_arch()", 0); + fsl_pci_assign_primary(); + #ifdef CONFIG_CPM2 cpm2_reset(); #endif - -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8540-pci") - fsl_add_bridge(np, 1); -#endif } static void stx_gp3_show_cpuinfo(struct seq_file *m) @@ -95,7 +86,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } -machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices); +machine_arch_initcall(stx_gp3, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c index bf7c89fb75b..ec0b7272fae 100644 --- a/arch/powerpc/platforms/85xx/tqm85xx.c +++ b/arch/powerpc/platforms/85xx/tqm85xx.c @@ -26,7 +26,6 @@ #include <linux/seq_file.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -47,7 +46,7 @@ static void __init tqm85xx_pic_init(void) { struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -60,10 +59,6 @@ static void __init tqm85xx_pic_init(void) */ static void __init tqm85xx_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("tqm85xx_setup_arch()", 0); @@ -71,20 +66,7 @@ static void __init tqm85xx_setup_arch(void) cpm2_reset(); #endif -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie")) { - struct resource rsrc; - if (!of_address_to_resource(np, 0, &rsrc)) { - if ((rsrc.start & 0xfffff) == 0x8000) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); - } - } - } -#endif + fsl_pci_assign_primary(); } static void tqm85xx_show_cpuinfo(struct seq_file *m) @@ -103,7 +85,7 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } -static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev) +static void tqm85xx_ti1520_fixup(struct pci_dev *pdev) { unsigned int val; @@ -124,9 +106,9 @@ static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520, tqm85xx_ti1520_fixup); -machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices); +machine_arch_initcall(tqm85xx, mpc85xx_common_publish_devices); -static const char *board[] __initdata = { +static const char * const board[] __initconst = { "tqc,tqm8540", "tqc,tqm8541", "tqc,tqm8548", diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c new file mode 100644 index 00000000000..1eadb6d0dc6 --- /dev/null +++ b/arch/powerpc/platforms/85xx/twr_p102x.c @@ -0,0 +1,148 @@ +/* + * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc. + * + * Author: Michael Johnston <michael.johnston@freescale.com> + * + * Description: + * TWR-P102x Board Setup + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/of_platform.h> + +#include <asm/pci-bridge.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> +#include <asm/fsl_guts.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" + +static void __init twr_p1025_pic_init(void) +{ + struct mpic *mpic; + +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (np) { + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + of_node_put(np); + } else + pr_err("Could not find qe-ic node\n"); +#endif +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init twr_p1025_setup_arch(void) +{ +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("twr_p1025_setup_arch()", 0); + + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); + +#ifdef CONFIG_QUICC_ENGINE + mpc85xx_qe_init(); + mpc85xx_qe_par_io_init(); + +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) + if (machine_is(twr_p1025)) { + struct ccsr_guts __iomem *guts; + + np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts"); + if (np) { + guts = of_iomap(np, 0); + if (!guts) + pr_err("twr_p1025: could not map global utilities register\n"); + else { + /* P1025 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management signals in PMUXCR + * register. + * Set QE mux bits in PMUXCR */ + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + +#if defined(CONFIG_SERIAL_QE) + /* On P1025TWR board, the UCC7 acted as UART port. + * However, The UCC7's CTS pin is low level in default, + * it will impact the transmission in full duplex + * communication. So disable the Flow control pin PA18. + * The UCC7 UART just can use RXD and TXD pins. + */ + par_io_config_pin(0, 18, 0, 0, 0, 0); +#endif + /* Drive PB29 to CPLD low - CPLD will then change + * muxing from LBC to QE */ + par_io_config_pin(1, 29, 1, 0, 0, 0); + par_io_data_set(1, 29, 0); + } + of_node_put(np); + } + } +#endif +#endif /* CONFIG_QUICC_ENGINE */ + + pr_info("TWR-P1025 board from Freescale Semiconductor\n"); +} + +machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices); + +static int __init twr_p1025_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,TWR-P1025"); +} + +define_machine(twr_p1025) { + .name = "TWR-P1025", + .probe = twr_p1025_probe, + .setup_arch = twr_p1025_setup_arch, + .init_IRQ = twr_p1025_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c index 3a69f8b77de..1a9c1085855 100644 --- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c +++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c @@ -21,7 +21,6 @@ #include <linux/interrupt.h> #include <linux/of_platform.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> @@ -43,9 +42,7 @@ void __init xes_mpc85xx_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -114,18 +111,11 @@ static void xes_mpc85xx_fixups(void) } } -#ifdef CONFIG_PCI -static int primary_phb_addr; -#endif - /* * Setup the architecture */ static void __init xes_mpc85xx_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif struct device_node *root; const char *model = "Unknown"; @@ -140,26 +130,14 @@ static void __init xes_mpc85xx_setup_arch(void) xes_mpc85xx_fixups(); -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie")) { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == primary_phb_addr) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); - } - } -#endif - mpc85xx_smp_init(); + + fsl_pci_assign_primary(); } -machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices); -machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices); -machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices); +machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices); +machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices); +machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -168,42 +146,21 @@ static int __init xes_mpc8572_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "xes,MPC8572")) { -#ifdef CONFIG_PCI - primary_phb_addr = 0x8000; -#endif - return 1; - } else { - return 0; - } + return of_flat_dt_is_compatible(root, "xes,MPC8572"); } static int __init xes_mpc8548_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "xes,MPC8548")) { -#ifdef CONFIG_PCI - primary_phb_addr = 0xb000; -#endif - return 1; - } else { - return 0; - } + return of_flat_dt_is_compatible(root, "xes,MPC8548"); } static int __init xes_mpc8540_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "xes,MPC8540")) { -#ifdef CONFIG_PCI - primary_phb_addr = 0xb000; -#endif - return 1; - } else { - return 0; - } + return of_flat_dt_is_compatible(root, "xes,MPC8540"); } define_machine(xes_mpc8572) { @@ -213,6 +170,7 @@ define_machine(xes_mpc8572) { .init_IRQ = xes_mpc85xx_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, @@ -227,6 +185,7 @@ define_machine(xes_mpc8548) { .init_IRQ = xes_mpc85xx_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, @@ -241,6 +200,7 @@ define_machine(xes_mpc8540) { .init_IRQ = xes_mpc85xx_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, |