aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/85xx/p1022_ds.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/85xx/p1022_ds.c')
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c503
1 files changed, 361 insertions, 142 deletions
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 7eb5c40c069..6ac986d3f8a 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -18,17 +18,25 @@
#include <linux/pci.h>
#include <linux/of_platform.h>
-#include <linux/memblock.h>
#include <asm/div64.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include <asm/udbg.h>
#include <asm/fsl_guts.h>
+#include <asm/fsl_lbc.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+#define PMUXCR_ELBCDIU_MASK 0xc0000000
+#define PMUXCR_ELBCDIU_NOR16 0x80000000
+#define PMUXCR_ELBCDIU_DIU 0x40000000
+
/*
* Board-specific initialization of the DIU. This code should probably be
* executed when the DIU is opened, rather than in arch code, but the DIU
@@ -46,11 +54,22 @@
#define CLKDVDR_PXCLK_MASK 0x00FF0000
/* Some ngPIXIS register definitions */
+#define PX_CTL 3
+#define PX_BRDCFG0 8
+#define PX_BRDCFG1 9
+
+#define PX_BRDCFG0_ELBC_SPI_MASK 0xc0
+#define PX_BRDCFG0_ELBC_SPI_ELBC 0x00
+#define PX_BRDCFG0_ELBC_SPI_NULL 0xc0
+#define PX_BRDCFG0_ELBC_DIU 0x02
+
#define PX_BRDCFG1_DVIEN 0x80
#define PX_BRDCFG1_DFPEN 0x40
#define PX_BRDCFG1_BACKLIGHT 0x20
#define PX_BRDCFG1_DDCEN 0x10
+#define PX_CTL_ALTACC 0x80
+
/*
* DIU Area Descriptor
*
@@ -87,77 +106,262 @@
(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
-/**
- * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth
+struct fsl_law {
+ u32 lawbar;
+ u32 reserved1;
+ u32 lawar;
+ u32 reserved[5];
+};
+
+#define LAWBAR_MASK 0x00F00000
+#define LAWBAR_SHIFT 12
+
+#define LAWAR_EN 0x80000000
+#define LAWAR_TGT_MASK 0x01F00000
+#define LAW_TRGT_IF_LBC (0x04 << 20)
+
+#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK)
+#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC)
+
+#define BR_BA 0xFFFF8000
+
+/*
+ * Map a BRx value to a physical address
*
- * The Area Descriptor is a 32-bit value that determine which bits in each
- * pixel are to be used for each color.
+ * The localbus BRx registers only store the lower 32 bits of the address. To
+ * obtain the upper four bits, we need to scan the LAW table. The entry which
+ * maps to the localbus will contain the upper four bits.
*/
-static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br)
{
- switch (bits_per_pixel) {
- case 32:
- /* 0x88883316 */
- return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8);
- case 24:
- /* 0x88082219 */
- return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8);
- case 16:
- /* 0x65053118 */
- return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0);
- default:
- pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel);
- return 0;
+#ifndef CONFIG_PHYS_64BIT
+ /*
+ * If we only have 32-bit addressing, then the BRx address *is* the
+ * physical address.
+ */
+ return br & BR_BA;
+#else
+ const struct fsl_law *law = ecm + 0xc08;
+ unsigned int i;
+
+ for (i = 0; i < count; i++) {
+ u64 lawbar = in_be32(&law[i].lawbar);
+ u32 lawar = in_be32(&law[i].lawar);
+
+ if ((lawar & LAWAR_MASK) == LAWAR_MATCH)
+ /* Extract the upper four bits */
+ return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12);
}
-}
-/**
- * p1022ds_set_gamma_table: update the gamma table, if necessary
- *
- * On some boards, the gamma table for some ports may need to be modified.
- * This is not the case on the P1022DS, so we do nothing.
-*/
-static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
-{
+ return 0;
+#endif
}
/**
* p1022ds_set_monitor_port: switch the output to a different monitor port
- *
*/
-static void p1022ds_set_monitor_port(int monitor_port)
+static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
- struct device_node *pixis_node;
- u8 __iomem *brdcfg1;
+ struct device_node *guts_node;
+ struct device_node *lbc_node = NULL;
+ struct device_node *law_node = NULL;
+ struct ccsr_guts __iomem *guts;
+ struct fsl_lbc_regs *lbc = NULL;
+ void *ecm = NULL;
+ u8 __iomem *lbc_lcs0_ba = NULL;
+ u8 __iomem *lbc_lcs1_ba = NULL;
+ phys_addr_t cs0_addr, cs1_addr;
+ u32 br0, or0, br1, or1;
+ const __be32 *iprop;
+ unsigned int num_laws;
+ u8 b;
- pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
- if (!pixis_node) {
- pr_err("p1022ds: missing ngPIXIS node\n");
+ /* Map the global utilities registers. */
+ guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
+ if (!guts_node) {
+ pr_err("p1022ds: missing global utilities device node\n");
return;
}
- brdcfg1 = of_iomap(pixis_node, 0);
- if (!brdcfg1) {
- pr_err("p1022ds: could not map ngPIXIS registers\n");
- return;
+ guts = of_iomap(guts_node, 0);
+ if (!guts) {
+ pr_err("p1022ds: could not map global utilities device\n");
+ goto exit;
}
- brdcfg1 += 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */
- switch (monitor_port) {
- case 0: /* DVI */
+ lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+ if (!lbc_node) {
+ pr_err("p1022ds: missing localbus node\n");
+ goto exit;
+ }
+
+ lbc = of_iomap(lbc_node, 0);
+ if (!lbc) {
+ pr_err("p1022ds: could not map localbus node\n");
+ goto exit;
+ }
+
+ law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law");
+ if (!law_node) {
+ pr_err("p1022ds: missing local access window node\n");
+ goto exit;
+ }
+
+ ecm = of_iomap(law_node, 0);
+ if (!ecm) {
+ pr_err("p1022ds: could not map local access window node\n");
+ goto exit;
+ }
+
+ iprop = of_get_property(law_node, "fsl,num-laws", NULL);
+ if (!iprop) {
+ pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
+ goto exit;
+ }
+ num_laws = be32_to_cpup(iprop);
+
+ /*
+ * Indirect mode requires both BR0 and BR1 to be set to "GPCM",
+ * otherwise writes to these addresses won't actually appear on the
+ * local bus, and so the PIXIS won't see them.
+ *
+ * In FCM mode, writes go to the NAND controller, which does not pass
+ * them to the localbus directly. So we force BR0 and BR1 into GPCM
+ * mode, since we don't care about what's behind the localbus any
+ * more.
+ */
+ br0 = in_be32(&lbc->bank[0].br);
+ br1 = in_be32(&lbc->bank[1].br);
+ or0 = in_be32(&lbc->bank[0].or);
+ or1 = in_be32(&lbc->bank[1].or);
+
+ /* Make sure CS0 and CS1 are programmed */
+ if (!(br0 & BR_V) || !(br1 & BR_V)) {
+ pr_err("p1022ds: CS0 and/or CS1 is not programmed\n");
+ goto exit;
+ }
+
+ /*
+ * Use the existing BRx/ORx values if it's already GPCM. Otherwise,
+ * force the values to simple 32KB GPCM windows with the most
+ * conservative timing.
+ */
+ if ((br0 & BR_MSEL) != BR_MS_GPCM) {
+ br0 = (br0 & BR_BA) | BR_V;
+ or0 = 0xFFFF8000 | 0xFF7;
+ out_be32(&lbc->bank[0].br, br0);
+ out_be32(&lbc->bank[0].or, or0);
+ }
+ if ((br1 & BR_MSEL) != BR_MS_GPCM) {
+ br1 = (br1 & BR_BA) | BR_V;
+ or1 = 0xFFFF8000 | 0xFF7;
+ out_be32(&lbc->bank[1].br, br1);
+ out_be32(&lbc->bank[1].or, or1);
+ }
+
+ cs0_addr = lbc_br_to_phys(ecm, num_laws, br0);
+ if (!cs0_addr) {
+ pr_err("p1022ds: could not determine physical address for CS0"
+ " (BR0=%08x)\n", br0);
+ goto exit;
+ }
+ cs1_addr = lbc_br_to_phys(ecm, num_laws, br1);
+ if (!cs1_addr) {
+ pr_err("p1022ds: could not determine physical address for CS1"
+ " (BR1=%08x)\n", br1);
+ goto exit;
+ }
+
+ lbc_lcs0_ba = ioremap(cs0_addr, 1);
+ if (!lbc_lcs0_ba) {
+ pr_err("p1022ds: could not ioremap CS0 address %llx\n",
+ (unsigned long long)cs0_addr);
+ goto exit;
+ }
+ lbc_lcs1_ba = ioremap(cs1_addr, 1);
+ if (!lbc_lcs1_ba) {
+ pr_err("p1022ds: could not ioremap CS1 address %llx\n",
+ (unsigned long long)cs1_addr);
+ goto exit;
+ }
+
+ /* Make sure we're in indirect mode first. */
+ if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
+ PMUXCR_ELBCDIU_DIU) {
+ struct device_node *pixis_node;
+ void __iomem *pixis;
+
+ pixis_node =
+ of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
+ if (!pixis_node) {
+ pr_err("p1022ds: missing pixis node\n");
+ goto exit;
+ }
+
+ pixis = of_iomap(pixis_node, 0);
+ of_node_put(pixis_node);
+ if (!pixis) {
+ pr_err("p1022ds: could not map pixis registers\n");
+ goto exit;
+ }
+
+ /* Enable indirect PIXIS mode. */
+ setbits8(pixis + PX_CTL, PX_CTL_ALTACC);
+ iounmap(pixis);
+
+ /* Switch the board mux to the DIU */
+ out_8(lbc_lcs0_ba, PX_BRDCFG0); /* BRDCFG0 */
+ b = in_8(lbc_lcs1_ba);
+ b |= PX_BRDCFG0_ELBC_DIU;
+ out_8(lbc_lcs1_ba, b);
+
+ /* Set the chip mux to DIU mode. */
+ clrsetbits_be32(&guts->pmuxcr, PMUXCR_ELBCDIU_MASK,
+ PMUXCR_ELBCDIU_DIU);
+ in_be32(&guts->pmuxcr);
+ }
+
+
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
/* Enable the DVI port, disable the DFP and the backlight */
- clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
- PX_BRDCFG1_DVIEN);
+ out_8(lbc_lcs0_ba, PX_BRDCFG1);
+ b = in_8(lbc_lcs1_ba);
+ b &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT);
+ b |= PX_BRDCFG1_DVIEN;
+ out_8(lbc_lcs1_ba, b);
break;
- case 1: /* Single link LVDS */
+ case FSL_DIU_PORT_LVDS:
+ /*
+ * LVDS also needs backlight enabled, otherwise the display
+ * will be blank.
+ */
/* Enable the DFP port, disable the DVI and the backlight */
- clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
- PX_BRDCFG1_DFPEN);
+ out_8(lbc_lcs0_ba, PX_BRDCFG1);
+ b = in_8(lbc_lcs1_ba);
+ b &= ~PX_BRDCFG1_DVIEN;
+ b |= PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT;
+ out_8(lbc_lcs1_ba, b);
break;
default:
- pr_err("p1022ds: unsupported monitor port %i\n", monitor_port);
+ pr_err("p1022ds: unsupported monitor port %i\n", port);
}
+
+exit:
+ if (lbc_lcs1_ba)
+ iounmap(lbc_lcs1_ba);
+ if (lbc_lcs0_ba)
+ iounmap(lbc_lcs0_ba);
+ if (lbc)
+ iounmap(lbc);
+ if (ecm)
+ iounmap(ecm);
+ if (guts)
+ iounmap(guts);
+
+ of_node_put(law_node);
+ of_node_put(lbc_node);
+ of_node_put(guts_node);
}
/**
@@ -168,7 +372,7 @@ static void p1022ds_set_monitor_port(int monitor_port)
void p1022ds_set_pixel_clock(unsigned int pixclock)
{
struct device_node *guts_np = NULL;
- struct ccsr_guts_85xx __iomem *guts;
+ struct ccsr_guts __iomem *guts;
unsigned long freq;
u64 temp;
u32 pxclk;
@@ -176,14 +380,14 @@ void p1022ds_set_pixel_clock(unsigned int pixclock)
/* Map the global utilities registers. */
guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
if (!guts_np) {
- pr_err("p1022ds: missing global utilties device node\n");
+ pr_err("p1022ds: missing global utilities device node\n");
return;
}
guts = of_iomap(guts_np, 0);
of_node_put(guts_np);
if (!guts) {
- pr_err("p1022ds: could not map global utilties device\n");
+ pr_err("p1022ds: could not map global utilities device\n");
return;
}
@@ -192,8 +396,13 @@ void p1022ds_set_pixel_clock(unsigned int pixclock)
do_div(temp, pixclock);
freq = temp;
- /* pixclk is the ratio of the platform clock to the pixel clock */
+ /*
+ * 'pxclk' is the ratio of the platform clock to the pixel clock.
+ * This number is programmed into the CLKDVDR register, and the valid
+ * range of values is 2-255.
+ */
pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
+ pxclk = clamp_t(u32, pxclk, 2, 255);
/* Disable the pixel clock, and set it to non-inverted and no delay */
clrbits32(&guts->clkdvdr,
@@ -201,62 +410,59 @@ void p1022ds_set_pixel_clock(unsigned int pixclock)
/* Enable the clock and set the pxclk */
setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
-}
-/**
- * p1022ds_show_monitor_port: show the current monitor
- *
- * This function returns a string indicating whether the current monitor is
- * set to DVI or LVDS.
- */
-ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf)
-{
- return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n",
- monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' ');
+ iounmap(guts);
}
/**
- * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs
+ * p1022ds_valid_monitor_port: set the monitor port for sysfs
*/
-int p1022ds_set_sysfs_monitor_port(int val)
+enum fsl_diu_monitor_port
+p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return val < 2 ? val : 0;
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
+ case FSL_DIU_PORT_LVDS:
+ return port;
+ default:
+ return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
+ }
}
#endif
void __init p1022_ds_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- pr_err("Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- pr_err("Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
- MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
-
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
}
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/* TRUE if there is a "video=fslfb" command-line parameter. */
+static bool fslfb;
+
+/*
+ * Search for a "video=fslfb" command-line parameter, and set 'fslfb' to
+ * true if we find it.
+ *
+ * We need to use early_param() instead of __setup() because the normal
+ * __setup() gets called to late. However, early_param() gets called very
+ * early, before the device tree is unflattened, so all we can do now is set a
+ * global variable. Later on, p1022_ds_setup_arch() will use that variable
+ * to determine if we need to update the device tree.
+ */
+static int __init early_video_setup(char *options)
+{
+ fslfb = (strncmp(options, "fslfb:", 6) == 0);
+
+ return 0;
+}
+early_param("video", early_video_setup);
+
#endif
/*
@@ -264,71 +470,83 @@ void __init mpc85xx_smp_init(void);
*/
static void __init p1022_ds_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
- dma_addr_t max = 0xffffffff;
-
if (ppc_md.progress)
ppc_md.progress("p1022_ds_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
- struct resource rsrc;
- struct pci_controller *hose;
-
- of_address_to_resource(np, 0, &rsrc);
-
- if ((rsrc.start & 0xfffff) == 0x8000)
- fsl_add_bridge(np, 1);
- else
- fsl_add_bridge(np, 0);
-
- hose = pci_find_hose_for_OF_device(np);
- max = min(max, hose->dma_window_base_cur +
- hose->dma_window_size);
- }
-#endif
-
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
- diu_ops.get_pixel_format = p1022ds_get_pixel_format;
- diu_ops.set_gamma_table = p1022ds_set_gamma_table;
diu_ops.set_monitor_port = p1022ds_set_monitor_port;
diu_ops.set_pixel_clock = p1022ds_set_pixel_clock;
- diu_ops.show_monitor_port = p1022ds_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = p1022ds_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = p1022ds_valid_monitor_port;
+
+ /*
+ * Disable the NOR and NAND flash nodes if there is video=fslfb...
+ * command-line parameter. When the DIU is active, the localbus is
+ * unavailable, so we have to disable these nodes before the MTD
+ * driver loads.
+ */
+ if (fslfb) {
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+
+ if (np) {
+ struct device_node *np2;
+
+ of_node_get(np);
+ np2 = of_find_compatible_node(np, NULL, "cfi-flash");
+ if (np2) {
+ static struct property nor_status = {
+ .name = "status",
+ .value = "disabled",
+ .length = sizeof("disabled"),
+ };
+
+ /*
+ * of_update_property() is called before
+ * kmalloc() is available, so the 'new' object
+ * should be allocated in the global area.
+ * The easiest way is to do that is to
+ * allocate one static local variable for each
+ * call to this function.
+ */
+ pr_info("p1022ds: disabling %s node",
+ np2->full_name);
+ of_update_property(np2, &nor_status);
+ of_node_put(np2);
+ }
+
+ of_node_get(np);
+ np2 = of_find_compatible_node(np, NULL,
+ "fsl,elbc-fcm-nand");
+ if (np2) {
+ static struct property nand_status = {
+ .name = "status",
+ .value = "disabled",
+ .length = sizeof("disabled"),
+ };
+
+ pr_info("p1022ds: disabling %s node",
+ np2->full_name);
+ of_update_property(np2, &nand_status);
+ of_node_put(np2);
+ }
+
+ of_node_put(np);
+ }
+
+ }
+
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
-#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
- ppc_swiotlb_enable = 1;
- set_pci_dma_ops(&swiotlb_dma_ops);
- ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
- }
-#endif
+ fsl_pci_assign_primary();
+
+ swiotlb_detect_4g();
pr_info("Freescale P1022 DS reference board\n");
}
-static struct of_device_id __initdata p1022_ds_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- /* So that the DMA channel nodes can be probed individually: */
- { .compatible = "fsl,eloplus-dma", },
- {},
-};
-
-static int __init p1022_ds_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
-}
-machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
+machine_arch_initcall(p1022_ds, mpc85xx_common_publish_devices);
machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
@@ -349,6 +567,7 @@ define_machine(p1022_ds) {
.init_IRQ = p1022_ds_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+ .pcibios_fixup_phb = fsl_pcibios_fixup_phb,
#endif
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-04 02:41:59 +0000