diff options
Diffstat (limited to 'arch/powerpc/platforms/83xx/usb.c')
| -rw-r--r-- | arch/powerpc/platforms/83xx/usb.c | 70 |
1 files changed, 47 insertions, 23 deletions
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 471fdd8f410..1ad748bb39b 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -14,6 +14,7 @@ #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/errno.h> +#include <linux/of.h> #include <asm/io.h> #include <asm/prom.h> @@ -46,25 +47,25 @@ int mpc834x_usb_cfg(void) sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ prop = of_get_property(np, "phy_type", NULL); + port1_is_dr = 1; if (prop && (!strcmp(prop, "utmi") || !strcmp(prop, "utmi_wide"))) { sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; sicrh |= MPC834X_SICRH_USB_UTMI; - port1_is_dr = 1; + port0_is_dr = 1; } else if (prop && !strcmp(prop, "serial")) { dr_mode = of_get_property(np, "dr_mode", NULL); if (dr_mode && !strcmp(dr_mode, "otg")) { sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; - port1_is_dr = 1; + port0_is_dr = 1; } else { - sicrl |= MPC834X_SICRL_USB0; + sicrl |= MPC834X_SICRL_USB1; } } else if (prop && !strcmp(prop, "ulpi")) { - sicrl |= MPC834X_SICRL_USB0; + sicrl |= MPC834X_SICRL_USB1; } else { printk(KERN_WARNING "834x USB PHY type not supported\n"); } - port0_is_dr = 1; of_node_put(np); } np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph"); @@ -126,10 +127,11 @@ int mpc831x_usb_cfg(void) /* Configure clock */ immr_node = of_get_parent(np); - if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) + if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") || + of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))) clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC8315_SCCR_USB_MASK, - MPC8315_SCCR_USB_DRCM_11); + MPC8315_SCCR_USB_DRCM_01); else clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC83XX_SCCR_USB_MASK, @@ -137,15 +139,25 @@ int mpc831x_usb_cfg(void) /* Configure pin mux for ULPI. There is no pin mux for UTMI */ if (prop && !strcmp(prop, "ulpi")) { - temp = in_be32(immap + MPC83XX_SICRL_OFFS); - temp &= ~MPC831X_SICRL_USB_MASK; - temp |= MPC831X_SICRL_USB_ULPI; - out_be32(immap + MPC83XX_SICRL_OFFS, temp); - - temp = in_be32(immap + MPC83XX_SICRH_OFFS); - temp &= ~MPC831X_SICRH_USB_MASK; - temp |= MPC831X_SICRH_USB_ULPI; - out_be32(immap + MPC83XX_SICRH_OFFS, temp); + if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) { + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC8308_SICRH_USB_MASK, + MPC8308_SICRH_USB_ULPI); + } else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) { + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, + MPC8315_SICRL_USB_MASK, + MPC8315_SICRL_USB_ULPI); + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC8315_SICRH_USB_MASK, + MPC8315_SICRH_USB_ULPI); + } else { + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, + MPC831X_SICRL_USB_MASK, + MPC831X_SICRL_USB_ULPI); + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC831X_SICRH_USB_MASK, + MPC831X_SICRH_USB_ULPI); + } } iounmap(immap); @@ -159,23 +171,34 @@ int mpc831x_usb_cfg(void) of_node_put(np); return ret; } - usb_regs = ioremap(res.start, res.end - res.start + 1); + usb_regs = ioremap(res.start, resource_size(&res)); /* Using on-chip PHY */ if (prop && (!strcmp(prop, "utmi_wide") || !strcmp(prop, "utmi"))) { - /* Set UTMI_PHY_EN, REFSEL to 48MHZ */ + u32 refsel; + + if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) + goto out; + + if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) + refsel = CONTROL_REFSEL_24MHZ; + else + refsel = CONTROL_REFSEL_48MHZ; + /* Set UTMI_PHY_EN and REFSEL */ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, - CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ); + CONTROL_UTMI_PHY_EN | refsel); /* Using external UPLI PHY */ } else if (prop && !strcmp(prop, "ulpi")) { /* Set PHY_CLK_SEL to ULPI */ temp = CONTROL_PHY_CLK_SEL_ULPI; #ifdef CONFIG_USB_OTG /* Set OTG_PORT */ - dr_mode = of_get_property(np, "dr_mode", NULL); - if (dr_mode && !strcmp(dr_mode, "otg")) - temp |= CONTROL_OTG_PORT; + if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) { + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) + temp |= CONTROL_OTG_PORT; + } #endif /* CONFIG_USB_OTG */ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp); } else { @@ -183,6 +206,7 @@ int mpc831x_usb_cfg(void) ret = -EINVAL; } +out: iounmap(usb_regs); of_node_put(np); return ret; @@ -198,7 +222,7 @@ int mpc837x_usb_cfg(void) int ret = 0; np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr"); - if (!np) + if (!np || !of_device_is_available(np)) return -ENODEV; prop = of_get_property(np, "phy_type", NULL); |