diff options
Diffstat (limited to 'arch/powerpc/platforms/52xx/lite5200.c')
| -rw-r--r-- | arch/powerpc/platforms/52xx/lite5200.c | 180 |
1 files changed, 90 insertions, 90 deletions
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index 1cfc00dfb99..1843bc93201 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -4,7 +4,7 @@ * Written by: Grant Likely <grant.likely@secretlab.ca> * * Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved. - * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved. * * Description: * This program is free software; you can redistribute it and/or modify it @@ -15,33 +15,16 @@ #undef DEBUG -#include <linux/stddef.h> -#include <linux/kernel.h> #include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> #include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <linux/root_dev.h> #include <linux/initrd.h> - -#include <asm/system.h> -#include <asm/atomic.h> #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/ipic.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> #include <asm/prom.h> -#include <asm/udbg.h> -#include <sysdev/fsl_soc.h> -#include <asm/of_platform.h> - #include <asm/mpc52xx.h> /* ************************************************************************ @@ -50,19 +33,74 @@ * */ +/* mpc5200 device tree match tables */ +static struct of_device_id mpc5200_cdm_ids[] __initdata = { + { .compatible = "fsl,mpc5200-cdm", }, + { .compatible = "mpc5200-cdm", }, + {} +}; + +static struct of_device_id mpc5200_gpio_ids[] __initdata = { + { .compatible = "fsl,mpc5200-gpio", }, + { .compatible = "mpc5200-gpio", }, + {} +}; + +/* + * Fix clock configuration. + * + * Firmware is supposed to be responsible for this. If you are creating a + * new board port, do *NOT* duplicate this code. Fix your boot firmware + * to set it correctly in the first place + */ +static void __init +lite5200_fix_clock_config(void) +{ + struct device_node *np; + struct mpc52xx_cdm __iomem *cdm; + /* Map zones */ + np = of_find_matching_node(NULL, mpc5200_cdm_ids); + cdm = of_iomap(np, 0); + of_node_put(np); + if (!cdm) { + printk(KERN_ERR "%s() failed; expect abnormal behaviour\n", + __func__); + return; + } + + /* Use internal 48 Mhz */ + out_8(&cdm->ext_48mhz_en, 0x00); + out_8(&cdm->fd_enable, 0x01); + if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */ + out_be16(&cdm->fd_counters, 0x0001); + else + out_be16(&cdm->fd_counters, 0x5555); + + /* Unmap the regs */ + iounmap(cdm); +} + +/* + * Fix setting of port_config register. + * + * Firmware is supposed to be responsible for this. If you are creating a + * new board port, do *NOT* duplicate this code. Fix your boot firmware + * to set it correctly in the first place + */ static void __init -lite5200_setup_cpu(void) +lite5200_fix_port_config(void) { + struct device_node *np; struct mpc52xx_gpio __iomem *gpio; u32 port_config; - /* Map zones */ - gpio = mpc52xx_find_and_map("mpc5200-gpio"); + np = of_find_matching_node(NULL, mpc5200_gpio_ids); + gpio = of_iomap(np, 0); + of_node_put(np); if (!gpio) { - printk(KERN_ERR __FILE__ ": " - "Error while mapping GPIO register for port config. " - "Expect some abnormal behavior\n"); - goto error; + printk(KERN_ERR "%s() failed. expect abnormal behavior\n", + __func__); + return; } /* Set port config */ @@ -81,12 +119,10 @@ lite5200_setup_cpu(void) out_be32(&gpio->port_config, port_config); /* Unmap zone */ -error: iounmap(gpio); } #ifdef CONFIG_PM -static u32 descr_a; static void lite5200_suspend_prepare(void __iomem *mbar) { u8 pin = 1; /* GPIO_WKUP_1 (GPIO_PSC2_4) */ @@ -97,93 +133,57 @@ static void lite5200_suspend_prepare(void __iomem *mbar) * power down usb port * this needs to be called before of-ohci suspend code */ - descr_a = in_be32(mbar + 0x1048); - out_be32(mbar + 0x1048, (descr_a & ~0x200) | 0x100); + + /* set ports to "power switched" and "powered at the same time" + * USB Rh descriptor A: NPS = 0, PSM = 0 */ + out_be32(mbar + 0x1048, in_be32(mbar + 0x1048) & ~0x300); + /* USB Rh status: LPS = 1 - turn off power */ + out_be32(mbar + 0x1050, 0x00000001); } static void lite5200_resume_finish(void __iomem *mbar) { - out_be32(mbar + 0x1048, descr_a); + /* USB Rh status: LPSC = 1 - turn on power */ + out_be32(mbar + 0x1050, 0x00010000); } #endif static void __init lite5200_setup_arch(void) { - struct device_node *np; - if (ppc_md.progress) ppc_md.progress("lite5200_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np) { - const unsigned int *fp = - of_get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } + /* Map important registers from the internal memory map */ + mpc52xx_map_common_devices(); - /* CPU & Port mux setup */ - mpc52xx_setup_cpu(); /* Generic */ - lite5200_setup_cpu(); /* Platorm specific */ + /* Some mpc5200 & mpc5200b related configuration */ + mpc5200_setup_xlb_arbiter(); + + /* Fix things that firmware should have done. */ + lite5200_fix_clock_config(); + lite5200_fix_port_config(); #ifdef CONFIG_PM mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare; mpc52xx_suspend.board_resume_finish = lite5200_resume_finish; - mpc52xx_pm_init(); -#endif - -#ifdef CONFIG_PCI - np = of_find_node_by_type(NULL, "pci"); - if (np) { - mpc52xx_add_bridge(np); - of_node_put(np); - } -#endif - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; + lite5200_pm_init(); #endif + mpc52xx_setup_pci(); } -void lite5200_show_cpuinfo(struct seq_file *m) -{ - struct device_node* np = of_find_all_nodes(NULL); - const char *model = NULL; - - if (np) - model = of_get_property(np, "model", NULL); - - seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "machine\t\t: %s\n", model ? model : "unknown"); - - of_node_put(np); -} +static const char * const board[] __initconst = { + "fsl,lite5200", + "fsl,lite5200b", + NULL, +}; /* * Called very early, MMU is off, device-tree isn't unflattened */ static int __init lite5200_probe(void) { - unsigned long node = of_get_flat_dt_root(); - const char *model = of_get_flat_dt_prop(node, "model", NULL); - - if (!of_flat_dt_is_compatible(node, "fsl,lite5200") && - !of_flat_dt_is_compatible(node, "fsl,lite5200b")) - return 0; - pr_debug("%s board found\n", model ? model : "unknown"); - - return 1; + return of_flat_dt_match(of_get_flat_dt_root(), board); } define_machine(lite5200) { @@ -193,6 +193,6 @@ define_machine(lite5200) { .init = mpc52xx_declare_of_platform_devices, .init_IRQ = mpc52xx_init_irq, .get_irq = mpc52xx_get_irq, - .show_cpuinfo = lite5200_show_cpuinfo, + .restart = mpc52xx_restart, .calibrate_decr = generic_calibrate_decr, }; |