diff options
Diffstat (limited to 'arch/powerpc/platforms/44x')
21 files changed, 1467 insertions, 536 deletions
diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h index 42eabf87fea..63f703ecd23 100644 --- a/arch/powerpc/platforms/44x/44x.h +++ b/arch/powerpc/platforms/44x/44x.h @@ -3,6 +3,9 @@ extern u8 as1_readb(volatile u8 __iomem *addr); extern void as1_writeb(u8 data, volatile u8 __iomem *addr); -extern void ppc44x_reset_system(char *cmd); + +#define GPIO0_OSRH 0xC +#define GPIO0_TSRH 0x14 +#define GPIO0_ISR1H 0x34 #endif /* __POWERPC_PLATFORMS_44X_44X_H */ diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 1bfb2191010..4d88f6a1905 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -1,12 +1,35 @@ +config PPC_47x + bool "Support for 47x variant" + depends on 44x + default n + select MPIC + help + This option enables support for the 47x family of processors and is + not currently compatible with other 44x or 46x varients + config BAMBOO bool "Bamboo" depends on 44x default n + select PPC44x_SIMPLE select 440EP select PCI help This option enables support for the IBM PPC440EP evaluation board. +config BLUESTONE + bool "Bluestone" + depends on 44x + default n + select PPC44x_SIMPLE + select APM821xx + select PCI_MSI + select PPC4xx_MSI + select PPC4xx_PCI_EXPRESS + select IBM_EMAC_RGMII + help + This option enables support for the APM APM821xx Evaluation board. + config EBONY bool "Ebony" depends on 44x @@ -17,10 +40,20 @@ config EBONY help This option enables support for the IBM PPC440GP evaluation board. +config SAM440EP + bool "Sam440ep" + depends on 44x + default n + select 440EP + select PCI + help + This option enables support for the ACube Sam440ep board. + config SEQUOIA bool "Sequoia" depends on 44x default n + select PPC44x_SIMPLE select 440EPX help This option enables support for the AMCC PPC440EPX evaluation board. @@ -29,6 +62,7 @@ config TAISHAN bool "Taishan" depends on 44x default n + select PPC44x_SIMPLE select 440GX select PCI help @@ -39,9 +73,12 @@ config KATMAI bool "Katmai" depends on 44x default n + select PPC44x_SIMPLE select 440SPe select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI help This option enables support for the AMCC PPC440SPe evaluation board. @@ -49,6 +86,7 @@ config RAINIER bool "Rainier" depends on 44x default n + select PPC44x_SIMPLE select 440GRX select PCI help @@ -67,61 +105,277 @@ config WARP See http://www.pikatechnologies.com/ and follow the "PIKA for Computer Telephony Developers" link for more information. -#config LUAN -# bool "Luan" -# depends on 44x -# default n -# select 440SP -# help -# This option enables support for the IBM PPC440SP evaluation board. - -#config OCOTEA -# bool "Ocotea" -# depends on 44x -# default n -# select 440GX -# help -# This option enables support for the IBM PPC440GX evaluation board. +config ARCHES + bool "Arches" + depends on 44x + default n + select PPC44x_SIMPLE + select 460EX # Odd since it uses 460GT but the effects are the same + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC Dual PPC460GT evaluation board. + +config CANYONLANDS + bool "Canyonlands" + depends on 44x + default n + select 460EX + select PCI + select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII + help + This option enables support for the AMCC PPC460EX evaluation board. + +config GLACIER + bool "Glacier" + depends on 44x + default n + select PPC44x_SIMPLE + select 460EX # Odd since it uses 460GT but the effects are the same + select PCI + select PPC4xx_PCI_EXPRESS + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII + help + This option enables support for the AMCC PPC460GT evaluation board. + +config REDWOOD + bool "Redwood" + depends on 44x + default n + select PPC44x_SIMPLE + select 460SX + select PCI + select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI + help + This option enables support for the AMCC PPC460SX Redwood board. + +config EIGER + bool "Eiger" + depends on 44x + default n + select PPC44x_SIMPLE + select 460SX + select PCI + select PPC4xx_PCI_EXPRESS + select IBM_EMAC_RGMII + help + This option enables support for the AMCC PPC460SX evaluation board. + +config YOSEMITE + bool "Yosemite" + depends on 44x + default n + select PPC44x_SIMPLE + select 440EP + select PCI + help + This option enables support for the AMCC PPC440EP evaluation board. + +config ISS4xx + bool "ISS 4xx Simulator" + depends on (44x || 40x) + default n + select 405GP if 40x + select 440GP if 44x && !PPC_47x + select PPC_FPU + select OF_RTC + help + This option enables support for the IBM ISS simulation environment + +config CURRITUCK + bool "IBM Currituck (476fpe) Support" + depends on PPC_47x + default n + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + help + This option enables support for the IBM Currituck (476fpe) evaluation board + +config AKEBONO + bool "IBM Akebono (476gtr) Support" + depends on PPC_47x + default n + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_HSTA_MSI + select I2C + select I2C_IBM_IIC + select NETDEVICES + select ETHERNET + select NET_VENDOR_IBM + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII_WOL + select USB + select USB_OHCI_HCD_PLATFORM + select USB_EHCI_HCD_PLATFORM + select MMC_SDHCI + select MMC_SDHCI_PLTFM + select MMC_SDHCI_OF_476GTR + select ATA + select SATA_AHCI_PLATFORM + help + This option enables support for the IBM Akebono (476gtr) evaluation board + + +config ICON + bool "Icon" + depends on 44x + default n + select PPC44x_SIMPLE + select 440SPe + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC440SPe evaluation board. + +config XILINX_VIRTEX440_GENERIC_BOARD + bool "Generic Xilinx Virtex 5 FXT board support" + depends on 44x + default n + select XILINX_VIRTEX_5_FXT + help + This option enables generic support for Xilinx Virtex based boards + that use a 440 based processor in the Virtex 5 FXT FPGA architecture. + + The generic virtex board support matches any device tree which + specifies 'xlnx,virtex440' in its compatible field. This includes + the Xilinx ML5xx reference designs using the powerpc core. + + Most Virtex 5 designs should use this unless it needs to do some + special configuration at board probe time. + +config XILINX_ML510 + bool "Xilinx ML510 extra support" + depends on XILINX_VIRTEX440_GENERIC_BOARD + select PPC_PCI_CHOICE + select XILINX_PCI if PCI + select PPC_INDIRECT_PCI if PCI + select PPC_I8259 if PCI + help + This option enables extra support for features on the Xilinx ML510 + board. The ML510 has a PCI bus with ALI south bridge. + +config PPC44x_SIMPLE + bool "Simple PowerPC 44x board support" + depends on 44x + default n + help + This option enables the simple PowerPC 44x platform support. + +config PPC4xx_GPIO + bool "PPC4xx GPIO support" + depends on 44x + select ARCH_REQUIRE_GPIOLIB + help + Enable gpiolib support for ppc440 based boards + +config PPC4xx_OCM + bool "PPC4xx On Chip Memory (OCM) support" + depends on 4xx + select PPC_LIB_RHEAP + help + Enable OCM support for PowerPC 4xx platforms with on chip memory, + OCM provides the fast place for memory access to improve performance. # 44x specific CPU modules, selected based on the board above. config 440EP bool select PPC_FPU select IBM440EP_ERR42 - select IBM_NEW_EMAC_ZMII - select USB_ARCH_HAS_OHCI + select IBM_EMAC_ZMII config 440EPX bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC config 440GRX bool - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII config 440GP bool - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_ZMII config 440GX bool - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII #test only - select IBM_NEW_EMAC_TAH #test only + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII #test only + select IBM_EMAC_TAH #test only config 440SP bool config 440SPe bool - select IBM_NEW_EMAC_EMAC4 + select IBM_EMAC_EMAC4 + +config 460EX + bool + select PPC_FPU + select IBM_EMAC_EMAC4 + select IBM_EMAC_TAH + +config 460SX + bool + select PPC_FPU + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII + select IBM_EMAC_TAH + +config 476FPE + bool + select PPC_FPU + +config APM821xx + bool + select PPC_FPU + select IBM_EMAC_EMAC4 + select IBM_EMAC_TAH + +config 476FPE_ERR46 + depends on 476FPE + bool "Enable linker work around for PPC476FPE errata #46" + help + This option enables a work around for an icache bug on 476 + that can cause execution of stale instructions when falling + through pages (IBM errata #46). It requires a recent version + of binutils which supports the --ppc476-workaround option. + + The work around enables the appropriate linker options and + ensures that all module output sections are aligned to 4K + page boundaries. The work around is only required when + building modules. # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 bool + +# Xilinx specific config options. +config XILINX_VIRTEX + bool + select DEFAULT_UIMAGE + +# Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above +config XILINX_VIRTEX_5_FXT + bool + select XILINX_VIRTEX + diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 0864d4f1cbc..26d35b5941f 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,9 +1,14 @@ -obj-$(CONFIG_44x) := misc_44x.o +obj-$(CONFIG_44x) += misc_44x.o +ifneq ($(CONFIG_PPC4xx_CPM),y) +obj-$(CONFIG_44x) += idle.o +endif +obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o -obj-$(CONFIG_TAISHAN) += taishan.o -obj-$(CONFIG_BAMBOO) += bamboo.o -obj-$(CONFIG_SEQUOIA) += sequoia.o -obj-$(CONFIG_KATMAI) += katmai.o -obj-$(CONFIG_RAINIER) += rainier.o +obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_WARP) += warp.o -obj-$(CONFIG_WARP) += warp-nand.o +obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o +obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o +obj-$(CONFIG_ISS4xx) += iss4xx.o +obj-$(CONFIG_CANYONLANDS)+= canyonlands.o +obj-$(CONFIG_CURRITUCK) += ppc476.o +obj-$(CONFIG_AKEBONO) += ppc476.o diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c deleted file mode 100644 index fb9a22a7e8d..00000000000 --- a/arch/powerpc/platforms/44x/bamboo.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Bamboo board specific routines - * - * Wade Farnsworth <wfarnsworth@mvista.com> - * Copyright 2004 MontaVista Software Inc. - * - * Rewritten and ported to the merged powerpc tree: - * Josh Boyer <jwboyer@linux.vnet.ibm.com> - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/of_platform.h> - -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/time.h> -#include <asm/uic.h> -#include <asm/pci-bridge.h> - -#include "44x.h" - -static __initdata struct of_device_id bamboo_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init bamboo_device_probe(void) -{ - of_platform_bus_probe(NULL, bamboo_of_bus, NULL); - - return 0; -} -machine_device_initcall(bamboo, bamboo_device_probe); - -static int __init bamboo_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,bamboo")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(bamboo) { - .name = "Bamboo", - .probe = bamboo_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c new file mode 100644 index 00000000000..e300dd4c89b --- /dev/null +++ b/arch/powerpc/platforms/44x/canyonlands.c @@ -0,0 +1,134 @@ +/* + * This contain platform specific code for APM PPC460EX based Canyonlands + * board. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Rupjyoti Sarmah <rsarmah@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> +#include <asm/udbg.h> +#include <asm/uic.h> +#include <linux/of_platform.h> +#include <linux/delay.h> +#include "44x.h" + +#define BCSR_USB_EN 0x11 + +static __initdata struct of_device_id ppc460ex_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init ppc460ex_device_probe(void) +{ + of_platform_bus_probe(NULL, ppc460ex_of_bus, NULL); + + return 0; +} +machine_device_initcall(canyonlands, ppc460ex_device_probe); + +/* Using this code only for the Canyonlands board. */ + +static int __init ppc460ex_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + if (of_flat_dt_is_compatible(root, "amcc,canyonlands")) { + pci_set_flags(PCI_REASSIGN_ALL_RSRC); + return 1; + } + return 0; +} + +/* USB PHY fixup code on Canyonlands kit. */ + +static int __init ppc460ex_canyonlands_fixup(void) +{ + u8 __iomem *bcsr ; + void __iomem *vaddr; + struct device_node *np; + int ret = 0; + + np = of_find_compatible_node(NULL, NULL, "amcc,ppc460ex-bcsr"); + if (!np) { + printk(KERN_ERR "failed did not find amcc, ppc460ex bcsr node\n"); + return -ENODEV; + } + + bcsr = of_iomap(np, 0); + of_node_put(np); + + if (!bcsr) { + printk(KERN_CRIT "Could not remap bcsr\n"); + ret = -ENODEV; + goto err_bcsr; + } + + np = of_find_compatible_node(NULL, NULL, "ibm,ppc4xx-gpio"); + if (!np) { + printk(KERN_ERR "failed did not find ibm,ppc4xx-gpio node\n"); + return -ENODEV; + } + + vaddr = of_iomap(np, 0); + of_node_put(np); + + if (!vaddr) { + printk(KERN_CRIT "Could not get gpio node address\n"); + ret = -ENODEV; + goto err_gpio; + } + /* Disable USB, through the BCSR7 bits */ + setbits8(&bcsr[7], BCSR_USB_EN); + + /* Wait for a while after reset */ + msleep(100); + + /* Enable USB here */ + clrbits8(&bcsr[7], BCSR_USB_EN); + + /* + * Configure multiplexed gpio16 and gpio19 as alternate1 output + * source after USB reset. In this configuration gpio16 will be + * USB2HStop and gpio19 will be USB2DStop. For more details refer to + * table 34-7 of PPC460EX user manual. + */ + setbits32((vaddr + GPIO0_OSRH), 0x42000000); + setbits32((vaddr + GPIO0_TSRH), 0x42000000); +err_gpio: + iounmap(vaddr); +err_bcsr: + iounmap(bcsr); + return ret; +} +machine_device_initcall(canyonlands, ppc460ex_canyonlands_fixup); +define_machine(canyonlands) { + .name = "Canyonlands", + .probe = ppc460ex_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c index 1a8d467bff8..6a4232bbdf8 100644 --- a/arch/powerpc/platforms/44x/ebony.c +++ b/arch/powerpc/platforms/44x/ebony.c @@ -26,8 +26,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id ebony_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -55,7 +54,7 @@ static int __init ebony_probe(void) if (!of_flat_dt_is_compatible(root, "ibm,ebony")) return 0; - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + pci_set_flags(PCI_REASSIGN_ALL_RSRC); return 1; } @@ -66,6 +65,6 @@ define_machine(ebony) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/idle.c b/arch/powerpc/platforms/44x/idle.c new file mode 100644 index 00000000000..7a81f921fef --- /dev/null +++ b/arch/powerpc/platforms/44x/idle.c @@ -0,0 +1,67 @@ +/* + * Copyright 2008 IBM Corp. + * + * Based on arch/powerpc/platforms/pasemi/idle.c: + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Added by: Jerone Young <jyoung5@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/of.h> +#include <linux/kernel.h> +#include <asm/machdep.h> + +static int mode_spin; + +static void ppc44x_idle(void) +{ + unsigned long msr_save; + + msr_save = mfmsr(); + /* set wait state MSR */ + mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE); + isync(); + /* return to initial state */ + mtmsr(msr_save); + isync(); +} + +int __init ppc44x_idle_init(void) +{ + if (!mode_spin) { + /* If we are not setting spin mode + then we set to wait mode */ + ppc_md.power_save = &ppc44x_idle; + } + + return 0; +} + +arch_initcall(ppc44x_idle_init); + +static int __init idle_param(char *p) +{ + + if (!strcmp("spin", p)) { + mode_spin = 1; + ppc_md.power_save = NULL; + } + + return 0; +} + +early_param("idle", idle_param); diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c new file mode 100644 index 00000000000..4241bc82580 --- /dev/null +++ b/arch/powerpc/platforms/44x/iss4xx.c @@ -0,0 +1,168 @@ +/* + * PPC476 board specific routines + * + * Copyright 2010 Torez Smith, IBM Corporation. + * + * Based on earlier code: + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003-2005 Zultys Technologies + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/rtc.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/ppc4xx.h> +#include <asm/mpic.h> +#include <asm/mmu.h> + +static __initdata struct of_device_id iss4xx_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,plb6", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init iss4xx_device_probe(void) +{ + of_platform_bus_probe(NULL, iss4xx_of_bus, NULL); + of_instantiate_rtc(); + + return 0; +} +machine_device_initcall(iss4xx, iss4xx_device_probe); + +/* We can have either UICs or MPICs */ +static void __init iss4xx_init_irq(void) +{ + struct device_node *np; + + /* Find top level interrupt controller */ + for_each_node_with_property(np, "interrupt-controller") { + if (of_get_property(np, "interrupts", NULL) == NULL) + break; + } + if (np == NULL) + panic("Can't find top level interrupt controller"); + + /* Check type and do appropriate initialization */ + if (of_device_is_compatible(np, "ibm,uic")) { + uic_init_tree(); + ppc_md.get_irq = uic_get_irq; +#ifdef CONFIG_MPIC + } else if (of_device_is_compatible(np, "chrp,open-pic")) { + /* The MPIC driver will get everything it needs from the + * device-tree, just pass 0 to all arguments + */ + struct mpic *mpic = mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); + ppc_md.get_irq = mpic_get_irq; +#endif + } else + panic("Unrecognized top level interrupt controller"); +} + +#ifdef CONFIG_SMP +static void smp_iss4xx_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} + +static int smp_iss4xx_kick_cpu(int cpu) +{ + struct device_node *cpunode = of_get_cpu_node(cpu, NULL); + const u64 *spin_table_addr_prop; + u32 *spin_table; + extern void start_secondary_47x(void); + + BUG_ON(cpunode == NULL); + + /* Assume spin table. We could test for the enable-method in + * the device-tree but currently there's little point as it's + * our only supported method + */ + spin_table_addr_prop = of_get_property(cpunode, "cpu-release-addr", + NULL); + if (spin_table_addr_prop == NULL) { + pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu); + return -ENOENT; + } + + /* Assume it's mapped as part of the linear mapping. This is a bit + * fishy but will work fine for now + */ + spin_table = (u32 *)__va(*spin_table_addr_prop); + pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table); + + spin_table[3] = cpu; + smp_wmb(); + spin_table[1] = __pa(start_secondary_47x); + mb(); + + return 0; +} + +static struct smp_ops_t iss_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .setup_cpu = smp_iss4xx_setup_cpu, + .kick_cpu = smp_iss4xx_kick_cpu, + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +}; + +static void __init iss4xx_smp_init(void) +{ + if (mmu_has_feature(MMU_FTR_TYPE_47x)) + smp_ops = &iss_smp_ops; +} + +#else /* CONFIG_SMP */ +static void __init iss4xx_smp_init(void) { } +#endif /* CONFIG_SMP */ + +static void __init iss4xx_setup_arch(void) +{ + iss4xx_smp_init(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init iss4xx_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "ibm,iss-4xx")) + return 0; + + return 1; +} + +define_machine(iss4xx) { + .name = "ISS-4xx", + .probe = iss4xx_probe, + .progress = udbg_progress, + .init_IRQ = iss4xx_init_irq, + .setup_arch = iss4xx_setup_arch, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c deleted file mode 100644 index 11134121f27..00000000000 --- a/arch/powerpc/platforms/44x/katmai.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Katmai board specific routines - * - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - * Copyright 2007 IBM Corp. - * - * Based on the Bamboo code by - * Josh Boyer <jwboyer@linux.vnet.ibm.com> - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/of_platform.h> - -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/time.h> -#include <asm/uic.h> -#include <asm/pci-bridge.h> - -#include "44x.h" - -static __initdata struct of_device_id katmai_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init katmai_device_probe(void) -{ - of_platform_bus_probe(NULL, katmai_of_bus, NULL); - - return 0; -} -machine_device_initcall(katmai, katmai_device_probe); - -static int __init katmai_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,katmai")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(katmai) { - .name = "Katmai", - .probe = katmai_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; diff --git a/arch/powerpc/platforms/44x/misc_44x.S b/arch/powerpc/platforms/44x/misc_44x.S index 3bce71d5d75..dc12b8009e4 100644 --- a/arch/powerpc/platforms/44x/misc_44x.S +++ b/arch/powerpc/platforms/44x/misc_44x.S @@ -44,14 +44,3 @@ _GLOBAL(as1_writeb) sync isync blr - -/* - * void ppc44x_reset_system(char *cmd) - * - * At present, this routine just applies a system reset. - */ -_GLOBAL(ppc44x_reset_system) - mfspr r13,SPRN_DBCR0 - oris r13,r13,DBCR0_RST_SYSTEM@h - mtspr SPRN_DBCR0,r13 - b . /* Just in case the reset doesn't work */ diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c new file mode 100644 index 00000000000..3ffb915446e --- /dev/null +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -0,0 +1,91 @@ +/* + * Generic PowerPC 44x platform support + * + * Copyright 2008 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + * + * This implements simple platform support for PowerPC 44x chips. This is + * mostly used for eval boards or other simple and "generic" 44x boards. If + * your board has custom functions or hardware, then you will likely want to + * implement your own board.c file to accommodate it. + */ + +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/udbg.h> +#include <asm/uic.h> + +#include <linux/init.h> +#include <linux/of_platform.h> + +static __initdata struct of_device_id ppc44x_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init ppc44x_device_probe(void) +{ + of_platform_bus_probe(NULL, ppc44x_of_bus, NULL); + + return 0; +} +machine_device_initcall(ppc44x_simple, ppc44x_device_probe); + +/* This is the list of boards that can be supported by this simple + * platform code. This does _not_ mean the boards are compatible, + * as they most certainly are not from a device tree perspective. + * However, their differences are handled by the device tree and the + * drivers and therefore they don't need custom board support files. + * + * Again, if your board needs to do things differently then create a + * board.c file for it rather than adding it to this list. + */ +static char *board[] __initdata = { + "amcc,arches", + "amcc,bamboo", + "apm,bluestone", + "amcc,glacier", + "ibm,ebony", + "amcc,eiger", + "amcc,katmai", + "amcc,rainier", + "amcc,redwood", + "amcc,sequoia", + "amcc,taishan", + "amcc,yosemite", + "mosaixtech,icon" +}; + +static int __init ppc44x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + int i = 0; + + for (i = 0; i < ARRAY_SIZE(board); i++) { + if (of_flat_dt_is_compatible(root, board[i])) { + pci_set_flags(PCI_REASSIGN_ALL_RSRC); + return 1; + } + } + + return 0; +} + +define_machine(ppc44x_simple) { + .name = "PowerPC 44x Platform", + .probe = ppc44x_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/ppc476.c b/arch/powerpc/platforms/44x/ppc476.c new file mode 100644 index 00000000000..33986c1a05d --- /dev/null +++ b/arch/powerpc/platforms/44x/ppc476.c @@ -0,0 +1,299 @@ +/* + * PowerPC 476FPE board specific routines + * + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation + * + * Based on earlier code: + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003-2005 Zultys Technologies + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. + * Copyright © 2011 David Kliekamp IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/rtc.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/ppc4xx.h> +#include <asm/mpic.h> +#include <asm/mmu.h> + +#include <linux/pci.h> +#include <linux/i2c.h> + +static struct of_device_id ppc47x_of_bus[] __initdata = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,plb6", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +/* The EEPROM is missing and the default values are bogus. This forces USB in + * to EHCI mode */ +static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev) +{ + if (of_machine_is_compatible("ibm,currituck")) { + pci_write_config_dword(dev, 0xe0, 0x0114231f); + pci_write_config_dword(dev, 0xe4, 0x00006c40); + } +} +DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup); + +/* Akebono has an AVR microcontroller attached to the I2C bus + * which is used to power off/reset the system. */ + +/* AVR I2C Commands */ +#define AVR_PWRCTL_CMD (0x26) + +/* Flags for the power control I2C commands */ +#define AVR_PWRCTL_PWROFF (0x01) +#define AVR_PWRCTL_RESET (0x02) + +static struct i2c_client *avr_i2c_client; +static void avr_halt_system(int pwrctl_flags) +{ + /* Request the AVR to reset the system */ + i2c_smbus_write_byte_data(avr_i2c_client, + AVR_PWRCTL_CMD, pwrctl_flags); + + /* Wait for system to be reset */ + while (1) + ; +} + +static void avr_power_off_system(void) +{ + avr_halt_system(AVR_PWRCTL_PWROFF); +} + +static void avr_reset_system(char *cmd) +{ + avr_halt_system(AVR_PWRCTL_RESET); +} + +static int avr_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + avr_i2c_client = client; + ppc_md.restart = avr_reset_system; + ppc_md.power_off = avr_power_off_system; + return 0; +} + +static const struct i2c_device_id avr_id[] = { + { "akebono-avr", 0 }, + { } +}; + +static struct i2c_driver avr_driver = { + .driver = { + .name = "akebono-avr", + }, + .probe = avr_probe, + .id_table = avr_id, +}; + +static int __init ppc47x_device_probe(void) +{ + i2c_add_driver(&avr_driver); + of_platform_bus_probe(NULL, ppc47x_of_bus, NULL); + + return 0; +} +machine_device_initcall(ppc47x, ppc47x_device_probe); + +static void __init ppc47x_init_irq(void) +{ + struct device_node *np; + + /* Find top level interrupt controller */ + for_each_node_with_property(np, "interrupt-controller") { + if (of_get_property(np, "interrupts", NULL) == NULL) + break; + } + if (np == NULL) + panic("Can't find top level interrupt controller"); + + /* Check type and do appropriate initialization */ + if (of_device_is_compatible(np, "chrp,open-pic")) { + /* The MPIC driver will get everything it needs from the + * device-tree, just pass 0 to all arguments + */ + struct mpic *mpic = + mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); + ppc_md.get_irq = mpic_get_irq; + } else + panic("Unrecognized top level interrupt controller"); +} + +#ifdef CONFIG_SMP +static void smp_ppc47x_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} + +static int smp_ppc47x_kick_cpu(int cpu) +{ + struct device_node *cpunode = of_get_cpu_node(cpu, NULL); + const u64 *spin_table_addr_prop; + u32 *spin_table; + extern void start_secondary_47x(void); + + BUG_ON(cpunode == NULL); + + /* Assume spin table. We could test for the enable-method in + * the device-tree but currently there's little point as it's + * our only supported method + */ + spin_table_addr_prop = + of_get_property(cpunode, "cpu-release-addr", NULL); + + if (spin_table_addr_prop == NULL) { + pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", + cpu); + return 1; + } + + /* Assume it's mapped as part of the linear mapping. This is a bit + * fishy but will work fine for now + * + * XXX: Is there any reason to assume differently? + */ + spin_table = (u32 *)__va(*spin_table_addr_prop); + pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table); + + spin_table[3] = cpu; + smp_wmb(); + spin_table[1] = __pa(start_secondary_47x); + mb(); + + return 0; +} + +static struct smp_ops_t ppc47x_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .setup_cpu = smp_ppc47x_setup_cpu, + .kick_cpu = smp_ppc47x_kick_cpu, + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +}; + +static void __init ppc47x_smp_init(void) +{ + if (mmu_has_feature(MMU_FTR_TYPE_47x)) + smp_ops = &ppc47x_smp_ops; +} + +#else /* CONFIG_SMP */ +static void __init ppc47x_smp_init(void) { } +#endif /* CONFIG_SMP */ + +static void __init ppc47x_setup_arch(void) +{ + + /* No need to check the DMA config as we /know/ our windows are all of + * RAM. Lets hope that doesn't change */ + swiotlb_detect_4g(); + + ppc47x_smp_init(); +} + +static int board_rev = -1; +static int __init ppc47x_get_board_rev(void) +{ + int reg; + u8 *fpga; + struct device_node *np = NULL; + + if (of_machine_is_compatible("ibm,currituck")) { + np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga"); + reg = 0; + } else if (of_machine_is_compatible("ibm,akebono")) { + np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga"); + reg = 2; + } + + if (!np) + goto fail; + + fpga = (u8 *) of_iomap(np, 0); + of_node_put(np); + if (!fpga) + goto fail; + + board_rev = ioread8(fpga + reg) & 0x03; + pr_info("%s: Found board revision %d\n", __func__, board_rev); + iounmap(fpga); + return 0; + +fail: + pr_info("%s: Unable to find board revision\n", __func__); + return 0; +} +machine_arch_initcall(ppc47x, ppc47x_get_board_rev); + +/* Use USB controller should have been hardware swizzled but it wasn't :( */ +static void ppc47x_pci_irq_fixup(struct pci_dev *dev) +{ + if (dev->vendor == 0x1033 && (dev->device == 0x0035 || + dev->device == 0x00e0)) { + if (board_rev == 0) { + dev->irq = irq_create_mapping(NULL, 47); + pr_info("%s: Mapping irq %d\n", __func__, dev->irq); + } else if (board_rev == 2) { + dev->irq = irq_create_mapping(NULL, 49); + pr_info("%s: Mapping irq %d\n", __func__, dev->irq); + } else { + pr_alert("%s: Unknown board revision\n", __func__); + } + } +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init ppc47x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "ibm,akebono")) + return 1; + + if (of_flat_dt_is_compatible(root, "ibm,currituck")) { + ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup; + return 1; + } + + return 0; +} + +define_machine(ppc47x) { + .name = "PowerPC 47x", + .probe = ppc47x_probe, + .progress = udbg_progress, + .init_IRQ = ppc47x_init_irq, + .setup_arch = ppc47x_setup_arch, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/ppc476_modules.lds b/arch/powerpc/platforms/44x/ppc476_modules.lds new file mode 100644 index 00000000000..9fec5d34ba8 --- /dev/null +++ b/arch/powerpc/platforms/44x/ppc476_modules.lds @@ -0,0 +1,15 @@ +SECTIONS +{ + .text : ALIGN(4096) + { + *(.text .text.* .fixup) + } + .init.text : ALIGN(4096) + { + *(.init.text .init.text.*) + } + .exit.text : ALIGN(4096) + { + *(.exit.text .exit.text.*) + } +} diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c deleted file mode 100644 index a7fae1cf69c..00000000000 --- a/arch/powerpc/platforms/44x/rainier.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Rainier board specific routines - * - * Valentine Barshak <vbarshak@ru.mvista.com> - * Copyright 2007 MontaVista Software Inc. - * - * Based on the Bamboo code by - * Josh Boyer <jwboyer@linux.vnet.ibm.com> - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/of_platform.h> - -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/time.h> -#include <asm/uic.h> -#include <asm/pci-bridge.h> -#include "44x.h" - -static __initdata struct of_device_id rainier_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init rainier_device_probe(void) -{ - of_platform_bus_probe(NULL, rainier_of_bus, NULL); - - return 0; -} -machine_device_initcall(rainier, rainier_device_probe); - -static int __init rainier_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,rainier")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(rainier) { - .name = "Rainier", - .probe = rainier_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; diff --git a/arch/powerpc/platforms/44x/sam440ep.c b/arch/powerpc/platforms/44x/sam440ep.c new file mode 100644 index 00000000000..9e09b835758 --- /dev/null +++ b/arch/powerpc/platforms/44x/sam440ep.c @@ -0,0 +1,79 @@ +/* + * Sam440ep board specific routines based off bamboo.c code + * original copyrights below + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * Copyright 2004 MontaVista Software Inc. + * + * Rewritten and ported to the merged powerpc tree: + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright 2007 IBM Corporation + * + * Modified from bamboo.c for sam440ep: + * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> +#include <linux/i2c.h> + +static __initdata struct of_device_id sam440ep_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init sam440ep_device_probe(void) +{ + of_platform_bus_probe(NULL, sam440ep_of_bus, NULL); + + return 0; +} +machine_device_initcall(sam440ep, sam440ep_device_probe); + +static int __init sam440ep_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "acube,sam440ep")) + return 0; + + pci_set_flags(PCI_REASSIGN_ALL_RSRC); + + return 1; +} + +define_machine(sam440ep) { + .name = "Sam440ep", + .probe = sam440ep_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; + +static struct i2c_board_info sam440ep_rtc_info = { + .type = "m41st85", + .addr = 0x68, + .irq = -1, +}; + +static int sam440ep_setup_rtc(void) +{ + return i2c_register_board_info(0, &sam440ep_rtc_info, 1); +} +machine_device_initcall(sam440ep, sam440ep_setup_rtc); diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c deleted file mode 100644 index d279db42c89..00000000000 --- a/arch/powerpc/platforms/44x/sequoia.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Sequoia board specific routines - * - * Valentine Barshak <vbarshak@ru.mvista.com> - * Copyright 2007 MontaVista Software Inc. - * - * Based on the Bamboo code by - * Josh Boyer <jwboyer@linux.vnet.ibm.com> - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/of_platform.h> - -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/time.h> -#include <asm/uic.h> -#include <asm/pci-bridge.h> - -#include "44x.h" - -static __initdata struct of_device_id sequoia_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init sequoia_device_probe(void) -{ - of_platform_bus_probe(NULL, sequoia_of_bus, NULL); - - return 0; -} -machine_device_initcall(sequoia, sequoia_device_probe); - -static int __init sequoia_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,sequoia")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(sequoia) { - .name = "Sequoia", - .probe = sequoia_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c deleted file mode 100644 index 28ab7e2e02c..00000000000 --- a/arch/powerpc/platforms/44x/taishan.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Taishan board specific routines based off ebony.c code - * original copyrights below - * - * Matt Porter <mporter@kernel.crashing.org> - * Copyright 2002-2005 MontaVista Software Inc. - * - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2003-2005 Zultys Technologies - * - * Rewritten and ported to the merged powerpc tree: - * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. - * - * Modified from ebony.c for taishan: - * Copyright 2007 Hugh Blemings <hugh@au.ibm.com>, IBM Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/of_platform.h> - -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/time.h> -#include <asm/uic.h> -#include <asm/pci-bridge.h> - -#include "44x.h" - -static __initdata struct of_device_id taishan_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init taishan_device_probe(void) -{ - of_platform_bus_probe(NULL, taishan_of_bus, NULL); - - return 0; -} -machine_device_initcall(taishan, taishan_device_probe); - -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init taishan_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,taishan")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(taishan) { - .name = "Taishan", - .probe = taishan_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c new file mode 100644 index 00000000000..cf96ccaa760 --- /dev/null +++ b/arch/powerpc/platforms/44x/virtex.c @@ -0,0 +1,62 @@ +/* + * Xilinx Virtex 5FXT based board support, derived from + * the Xilinx Virtex (IIpro & 4FX) based board support + * + * Copyright 2007 Secret Lab Technologies Ltd. + * Copyright 2008 Xilinx, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/xilinx_intc.h> +#include <asm/xilinx_pci.h> +#include <asm/reg.h> +#include <asm/ppc4xx.h> +#include "44x.h" + +static struct of_device_id xilinx_of_bus_ids[] __initdata = { + { .compatible = "simple-bus", }, + { .compatible = "xlnx,plb-v46-1.00.a", }, + { .compatible = "xlnx,plb-v46-1.02.a", }, + { .compatible = "xlnx,plb-v34-1.01.a", }, + { .compatible = "xlnx,plb-v34-1.02.a", }, + { .compatible = "xlnx,opb-v20-1.10.c", }, + { .compatible = "xlnx,dcr-v29-1.00.a", }, + { .compatible = "xlnx,compound", }, + {} +}; + +static int __init virtex_device_probe(void) +{ + of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(virtex, virtex_device_probe); + +static int __init virtex_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "xlnx,virtex440")) + return 0; + + return 1; +} + +define_machine(virtex) { + .name = "Xilinx Virtex440", + .probe = virtex_probe, + .setup_arch = xilinx_pci_init, + .init_IRQ = xilinx_intc_init_tree, + .get_irq = xilinx_intc_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = ppc4xx_reset_system, +}; diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c new file mode 100644 index 00000000000..1fdb8748638 --- /dev/null +++ b/arch/powerpc/platforms/44x/virtex_ml510.c @@ -0,0 +1,29 @@ +#include <asm/i8259.h> +#include <linux/pci.h> +#include "44x.h" + +/** + * ml510_ail_quirk + */ +static void ml510_ali_quirk(struct pci_dev *dev) +{ + /* Enable the IDE controller */ + pci_write_config_byte(dev, 0x58, 0x4c); + /* Assign irq 14 to the primary ide channel */ + pci_write_config_byte(dev, 0x44, 0x0d); + /* Assign irq 15 to the secondary ide channel */ + pci_write_config_byte(dev, 0x75, 0x0f); + /* Set the ide controller in native mode */ + pci_write_config_byte(dev, 0x09, 0xff); + + /* INTB = disabled, INTA = disabled */ + pci_write_config_byte(dev, 0x48, 0x00); + /* INTD = disabled, INTC = disabled */ + pci_write_config_byte(dev, 0x4a, 0x00); + /* Audio = INT7, Modem = disabled. */ + pci_write_config_byte(dev, 0x4b, 0x60); + /* USB = INT7 */ + pci_write_config_byte(dev, 0x74, 0x06); +} +DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk); + diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c deleted file mode 100644 index 84ab78ff8c0..00000000000 --- a/arch/powerpc/platforms/44x/warp-nand.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * PIKA Warp(tm) NAND flash specific routines - * - * Copyright (c) 2008 PIKA Technologies - * Sean MacLennan <smaclennan@pikatech.com> - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/ndfc.h> - -#ifdef CONFIG_MTD_NAND_NDFC - -#define CS_NAND_0 1 /* use chip select 1 for NAND device 0 */ - -#define WARP_NAND_FLASH_REG_ADDR 0xD0000000UL -#define WARP_NAND_FLASH_REG_SIZE 0x2000 - -static struct resource warp_ndfc = { - .start = WARP_NAND_FLASH_REG_ADDR, - .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct mtd_partition nand_parts[] = { - { - .name = "kernel", - .offset = 0, - .size = 0x0200000 - }, - { - .name = "root", - .offset = 0x0200000, - .size = 0x3400000 - }, - { - .name = "user", - .offset = 0x3600000, - .size = 0x0A00000 - }, -}; - -struct ndfc_controller_settings warp_ndfc_settings = { - .ccr_settings = (NDFC_CCR_BS(CS_NAND_0) | NDFC_CCR_ARAC1), - .ndfc_erpn = 0, -}; - -static struct ndfc_chip_settings warp_chip0_settings = { - .bank_settings = 0x80002222, -}; - -struct platform_nand_ctrl warp_nand_ctrl = { - .priv = &warp_ndfc_settings, -}; - -static struct platform_device warp_ndfc_device = { - .name = "ndfc-nand", - .id = 0, - .dev = { - .platform_data = &warp_nand_ctrl, - }, - .num_resources = 1, - .resource = &warp_ndfc, -}; - -static struct nand_ecclayout nand_oob_16 = { - .eccbytes = 3, - .eccpos = { 0, 1, 2, 3, 6, 7 }, - .oobfree = { {.offset = 8, .length = 16} } -}; - -static struct platform_nand_chip warp_nand_chip0 = { - .nr_chips = 1, - .chip_offset = CS_NAND_0, - .nr_partitions = ARRAY_SIZE(nand_parts), - .partitions = nand_parts, - .chip_delay = 50, - .ecclayout = &nand_oob_16, - .priv = &warp_chip0_settings, -}; - -static struct platform_device warp_nand_device = { - .name = "ndfc-chip", - .id = 0, - .num_resources = 1, - .resource = &warp_ndfc, - .dev = { - .platform_data = &warp_nand_chip0, - .parent = &warp_ndfc_device.dev, - } -}; - -static int warp_setup_nand_flash(void) -{ - platform_device_register(&warp_ndfc_device); - platform_device_register(&warp_nand_device); - - return 0; -} -device_initcall(warp_setup_nand_flash); - -#endif diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index da5b7b7599d..534574a97ec 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -1,7 +1,7 @@ /* * PIKA Warp(tm) board specific routines * - * Copyright (c) 2008 PIKA Technologies + * Copyright (c) 2008-2009 PIKA Technologies * Sean MacLennan <smaclennan@pikatech.com> * * This program is free software; you can redistribute it and/or modify it @@ -12,14 +12,19 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <linux/kthread.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> +#include <linux/export.h> #include <asm/machdep.h> #include <asm/prom.h> #include <asm/udbg.h> #include <asm/time.h> #include <asm/uic.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id warp_of_bus[] = { @@ -40,7 +45,13 @@ static int __init warp_probe(void) { unsigned long root = of_get_flat_dt_root(); - return of_flat_dt_is_compatible(root, "pika,warp"); + if (!of_flat_dt_is_compatible(root, "pika,warp")) + return 0; + + /* For __dma_alloc_coherent */ + ISA_DMA_THRESHOLD = ~0L; + + return 1; } define_machine(warp) { @@ -49,66 +60,210 @@ define_machine(warp) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; -#define LED_GREEN (0x80000000 >> 0) -#define LED_RED (0x80000000 >> 1) +static int __init warp_post_info(void) +{ + struct device_node *np; + void __iomem *fpga; + u32 post1, post2; + + /* Sighhhh... POST information is in the sd area. */ + np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd"); + if (np == NULL) + return -ENOENT; + + fpga = of_iomap(np, 0); + of_node_put(np); + if (fpga == NULL) + return -ENOENT; + + post1 = in_be32(fpga + 0x40); + post2 = in_be32(fpga + 0x44); + + iounmap(fpga); + + if (post1 || post2) + printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2); + else + printk(KERN_INFO "Warp POST OK\n"); + + return 0; +} + + +#ifdef CONFIG_SENSORS_AD7414 + +static LIST_HEAD(dtm_shutdown_list); +static void __iomem *dtm_fpga; +static unsigned green_led, red_led; + + +struct dtm_shutdown { + struct list_head list; + void (*func)(void *arg); + void *arg; +}; -/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */ -void warp_set_power_leds(int green, int red) +int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg) { - static void __iomem *gpio_base = NULL; - unsigned leds; - - if (gpio_base == NULL) { - struct device_node *np; - - /* Power LEDS are on the second GPIO controller */ - np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP"); - if (np) - np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP"); - if (np == NULL) { - printk(KERN_ERR __FILE__ ": Unable to find gpio\n"); - return; + struct dtm_shutdown *shutdown; + + shutdown = kmalloc(sizeof(struct dtm_shutdown), GFP_KERNEL); + if (shutdown == NULL) + return -ENOMEM; + + shutdown->func = func; + shutdown->arg = arg; + + list_add(&shutdown->list, &dtm_shutdown_list); + + return 0; +} + +int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg) +{ + struct dtm_shutdown *shutdown; + + list_for_each_entry(shutdown, &dtm_shutdown_list, list) + if (shutdown->func == func && shutdown->arg == arg) { + list_del(&shutdown->list); + kfree(shutdown); + return 0; } - gpio_base = of_iomap(np, 0); - of_node_put(np); - if (gpio_base == NULL) { - printk(KERN_ERR __FILE__ ": Unable to map gpio"); - return; + return -EINVAL; +} + +static irqreturn_t temp_isr(int irq, void *context) +{ + struct dtm_shutdown *shutdown; + int value = 1; + + local_irq_disable(); + + gpio_set_value(green_led, 0); + + /* Run through the shutdown list. */ + list_for_each_entry(shutdown, &dtm_shutdown_list, list) + shutdown->func(shutdown->arg); + + printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n\n"); + + while (1) { + if (dtm_fpga) { + unsigned reset = in_be32(dtm_fpga + 0x14); + out_be32(dtm_fpga + 0x14, reset); } + + gpio_set_value(red_led, value); + value ^= 1; + mdelay(500); } - leds = in_be32(gpio_base); + /* Not reached */ + return IRQ_HANDLED; +} + +static int pika_setup_leds(void) +{ + struct device_node *np, *child; - switch (green) { - case 0: leds &= ~LED_GREEN; break; - case 1: leds |= LED_GREEN; break; + np = of_find_compatible_node(NULL, NULL, "gpio-leds"); + if (!np) { + printk(KERN_ERR __FILE__ ": Unable to find leds\n"); + return -ENOENT; } - switch (red) { - case 0: leds &= ~LED_RED; break; - case 1: leds |= LED_RED; break; + + for_each_child_of_node(np, child) + if (strcmp(child->name, "green") == 0) + green_led = of_get_gpio(child, 0); + else if (strcmp(child->name, "red") == 0) + red_led = of_get_gpio(child, 0); + + of_node_put(np); + + return 0; +} + +static void pika_setup_critical_temp(struct device_node *np, + struct i2c_client *client) +{ + int irq, rc; + + /* Do this before enabling critical temp interrupt since we + * may immediately interrupt. + */ + pika_setup_leds(); + + /* These registers are in 1 degree increments. */ + i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */ + i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */ + + irq = irq_of_parse_and_map(np, 0); + if (irq == NO_IRQ) { + printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n"); + return; } - out_be32(gpio_base, leds); + rc = request_irq(irq, temp_isr, 0, "ad7414", NULL); + if (rc) { + printk(KERN_ERR __FILE__ + ": Unable to request ad7414 irq %d = %d\n", irq, rc); + return; + } } -EXPORT_SYMBOL(warp_set_power_leds); +static inline void pika_dtm_check_fan(void __iomem *fpga) +{ + static int fan_state; + u32 fan = in_be32(fpga + 0x34) & (1 << 14); + + if (fan_state != fan) { + fan_state = fan; + if (fan) + printk(KERN_WARNING "Fan rotation error detected." + " Please check hardware.\n"); + } +} -#ifdef CONFIG_SENSORS_AD7414 static int pika_dtm_thread(void __iomem *fpga) { - extern int ad7414_get_temp(int index); + struct device_node *np; + struct i2c_client *client; + + np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); + if (np == NULL) + return -ENOENT; + + client = of_find_i2c_device_by_node(np); + if (client == NULL) { + of_node_put(np); + return -ENOENT; + } + + pika_setup_critical_temp(np, client); + + of_node_put(np); + + printk(KERN_INFO "Warp DTM thread running.\n"); while (!kthread_should_stop()) { - int temp = ad7414_get_temp(0); + int val; - out_be32(fpga, temp); + val = i2c_smbus_read_word_data(client, 0); + if (val < 0) + dev_dbg(&client->dev, "DTM read temp failed.\n"); + else { + s16 temp = swab16(val); + out_be32(fpga + 0x20, temp); + } + + pika_dtm_check_fan(fpga); set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(HZ); @@ -121,33 +276,44 @@ static int __init pika_dtm_start(void) { struct task_struct *dtm_thread; struct device_node *np; - struct resource res; - void __iomem *fpga; np = of_find_compatible_node(NULL, NULL, "pika,fpga"); if (np == NULL) return -ENOENT; - /* We do not call of_iomap here since it would map in the entire - * fpga space, which is over 8k. - */ - if (of_address_to_resource(np, 0, &res)) { - of_node_put(np); - return -ENOENT; - } + dtm_fpga = of_iomap(np, 0); of_node_put(np); - - fpga = ioremap(res.start, 0x24); - if (fpga == NULL) + if (dtm_fpga == NULL) return -ENOENT; - dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm"); + /* Must get post info before thread starts. */ + warp_post_info(); + + dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm"); if (IS_ERR(dtm_thread)) { - iounmap(fpga); + iounmap(dtm_fpga); return PTR_ERR(dtm_thread); } return 0; } -device_initcall(pika_dtm_start); +machine_late_initcall(warp, pika_dtm_start); + +#else /* !CONFIG_SENSORS_AD7414 */ + +int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg) +{ + return 0; +} + +int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg) +{ + return 0; +} + +machine_late_initcall(warp, warp_post_info); + #endif + +EXPORT_SYMBOL(pika_dtm_register_shutdown); +EXPORT_SYMBOL(pika_dtm_unregister_shutdown); |