diff options
Diffstat (limited to 'arch/powerpc/platforms/44x')
| -rw-r--r-- | arch/powerpc/platforms/44x/44x.h | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/Kconfig | 148 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/Makefile | 8 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/canyonlands.c | 134 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/ebony.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/iss4xx.c | 11 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/ppc44x_simple.c | 5 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/ppc476.c | 299 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/ppc476_modules.lds | 15 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/sam440ep.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/virtex_ml510.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/warp.c | 2 |
12 files changed, 573 insertions, 59 deletions
diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h index dbc4d2b4301..63f703ecd23 100644 --- a/arch/powerpc/platforms/44x/44x.h +++ b/arch/powerpc/platforms/44x/44x.h @@ -4,4 +4,8 @@ extern u8 as1_readb(volatile u8 __iomem *addr); extern void as1_writeb(u8 data, volatile u8 __iomem *addr); +#define GPIO0_OSRH 0xC +#define GPIO0_TSRH 0x14 +#define GPIO0_ISR1H 0x34 + #endif /* __POWERPC_PLATFORMS_44X_44X_H */ diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 0f979c5c756..4d88f6a1905 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -23,7 +23,10 @@ config BLUESTONE default n select PPC44x_SIMPLE select APM821xx - select IBM_NEW_EMAC_RGMII + select PCI_MSI + select PPC4xx_MSI + select PPC4xx_PCI_EXPRESS + select IBM_EMAC_RGMII help This option enables support for the APM APM821xx Evaluation board. @@ -74,6 +77,8 @@ config KATMAI select 440SPe select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI help This option enables support for the AMCC PPC440SPe evaluation board. @@ -115,12 +120,13 @@ config CANYONLANDS bool "Canyonlands" depends on 44x default n - select PPC44x_SIMPLE select 460EX select PCI select PPC4xx_PCI_EXPRESS - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select PCI_MSI + select PPC4xx_MSI + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII help This option enables support for the AMCC PPC460EX evaluation board. @@ -132,8 +138,8 @@ config GLACIER select 460EX # Odd since it uses 460GT but the effects are the same select PCI select PPC4xx_PCI_EXPRESS - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII help This option enables support for the AMCC PPC460GT evaluation board. @@ -145,6 +151,8 @@ config REDWOOD select 460SX select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI help This option enables support for the AMCC PPC460SX Redwood board. @@ -156,7 +164,7 @@ config EIGER select 460SX select PCI select PPC4xx_PCI_EXPRESS - select IBM_NEW_EMAC_RGMII + select IBM_EMAC_RGMII help This option enables support for the AMCC PPC460SX evaluation board. @@ -181,6 +189,44 @@ config ISS4xx help This option enables support for the IBM ISS simulation environment +config CURRITUCK + bool "IBM Currituck (476fpe) Support" + depends on PPC_47x + default n + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + help + This option enables support for the IBM Currituck (476fpe) evaluation board + +config AKEBONO + bool "IBM Akebono (476gtr) Support" + depends on PPC_47x + default n + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_HSTA_MSI + select I2C + select I2C_IBM_IIC + select NETDEVICES + select ETHERNET + select NET_VENDOR_IBM + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII_WOL + select USB + select USB_OHCI_HCD_PLATFORM + select USB_EHCI_HCD_PLATFORM + select MMC_SDHCI + select MMC_SDHCI_PLTFM + select MMC_SDHCI_OF_476GTR + select ATA + select SATA_AHCI_PLATFORM + help + This option enables support for the IBM Akebono (476gtr) evaluation board + + config ICON bool "Icon" depends on 44x @@ -192,22 +238,6 @@ config ICON help This option enables support for the AMCC PPC440SPe evaluation board. -#config LUAN -# bool "Luan" -# depends on 44x -# default n -# select 440SP -# help -# This option enables support for the IBM PPC440SP evaluation board. - -#config OCOTEA -# bool "Ocotea" -# depends on 44x -# default n -# select 440GX -# help -# This option enables support for the IBM PPC440GX evaluation board. - config XILINX_VIRTEX440_GENERIC_BOARD bool "Generic Xilinx Virtex 5 FXT board support" depends on 44x @@ -246,68 +276,94 @@ config PPC4xx_GPIO bool "PPC4xx GPIO support" depends on 44x select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO help Enable gpiolib support for ppc440 based boards +config PPC4xx_OCM + bool "PPC4xx On Chip Memory (OCM) support" + depends on 4xx + select PPC_LIB_RHEAP + help + Enable OCM support for PowerPC 4xx platforms with on chip memory, + OCM provides the fast place for memory access to improve performance. + # 44x specific CPU modules, selected based on the board above. config 440EP bool select PPC_FPU select IBM440EP_ERR42 - select IBM_NEW_EMAC_ZMII - select USB_ARCH_HAS_OHCI + select IBM_EMAC_ZMII config 440EPX bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC config 440GRX bool - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII config 440GP bool - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_ZMII config 440GX bool - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII #test only - select IBM_NEW_EMAC_TAH #test only + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII #test only + select IBM_EMAC_TAH #test only config 440SP bool config 440SPe bool - select IBM_NEW_EMAC_EMAC4 + select IBM_EMAC_EMAC4 config 460EX bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_TAH + select IBM_EMAC_EMAC4 + select IBM_EMAC_TAH config 460SX bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII - select IBM_NEW_EMAC_TAH + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII + select IBM_EMAC_TAH + +config 476FPE + bool + select PPC_FPU config APM821xx bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_TAH + select IBM_EMAC_EMAC4 + select IBM_EMAC_TAH + +config 476FPE_ERR46 + depends on 476FPE + bool "Enable linker work around for PPC476FPE errata #46" + help + This option enables a work around for an icache bug on 476 + that can cause execution of stale instructions when falling + through pages (IBM errata #46). It requires a recent version + of binutils which supports the --ppc476-workaround option. + + The work around enables the appropriate linker options and + ensures that all module output sections are aligned to 4K + page boundaries. The work around is only required when + building modules. # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 82ff326e079..26d35b5941f 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,4 +1,7 @@ -obj-$(CONFIG_44x) := misc_44x.o idle.o +obj-$(CONFIG_44x) += misc_44x.o +ifneq ($(CONFIG_PPC4xx_CPM),y) +obj-$(CONFIG_44x) += idle.o +endif obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_SAM440EP) += sam440ep.o @@ -6,3 +9,6 @@ obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o obj-$(CONFIG_ISS4xx) += iss4xx.o +obj-$(CONFIG_CANYONLANDS)+= canyonlands.o +obj-$(CONFIG_CURRITUCK) += ppc476.o +obj-$(CONFIG_AKEBONO) += ppc476.o diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c new file mode 100644 index 00000000000..e300dd4c89b --- /dev/null +++ b/arch/powerpc/platforms/44x/canyonlands.c @@ -0,0 +1,134 @@ +/* + * This contain platform specific code for APM PPC460EX based Canyonlands + * board. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Rupjyoti Sarmah <rsarmah@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> +#include <asm/udbg.h> +#include <asm/uic.h> +#include <linux/of_platform.h> +#include <linux/delay.h> +#include "44x.h" + +#define BCSR_USB_EN 0x11 + +static __initdata struct of_device_id ppc460ex_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init ppc460ex_device_probe(void) +{ + of_platform_bus_probe(NULL, ppc460ex_of_bus, NULL); + + return 0; +} +machine_device_initcall(canyonlands, ppc460ex_device_probe); + +/* Using this code only for the Canyonlands board. */ + +static int __init ppc460ex_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + if (of_flat_dt_is_compatible(root, "amcc,canyonlands")) { + pci_set_flags(PCI_REASSIGN_ALL_RSRC); + return 1; + } + return 0; +} + +/* USB PHY fixup code on Canyonlands kit. */ + +static int __init ppc460ex_canyonlands_fixup(void) +{ + u8 __iomem *bcsr ; + void __iomem *vaddr; + struct device_node *np; + int ret = 0; + + np = of_find_compatible_node(NULL, NULL, "amcc,ppc460ex-bcsr"); + if (!np) { + printk(KERN_ERR "failed did not find amcc, ppc460ex bcsr node\n"); + return -ENODEV; + } + + bcsr = of_iomap(np, 0); + of_node_put(np); + + if (!bcsr) { + printk(KERN_CRIT "Could not remap bcsr\n"); + ret = -ENODEV; + goto err_bcsr; + } + + np = of_find_compatible_node(NULL, NULL, "ibm,ppc4xx-gpio"); + if (!np) { + printk(KERN_ERR "failed did not find ibm,ppc4xx-gpio node\n"); + return -ENODEV; + } + + vaddr = of_iomap(np, 0); + of_node_put(np); + + if (!vaddr) { + printk(KERN_CRIT "Could not get gpio node address\n"); + ret = -ENODEV; + goto err_gpio; + } + /* Disable USB, through the BCSR7 bits */ + setbits8(&bcsr[7], BCSR_USB_EN); + + /* Wait for a while after reset */ + msleep(100); + + /* Enable USB here */ + clrbits8(&bcsr[7], BCSR_USB_EN); + + /* + * Configure multiplexed gpio16 and gpio19 as alternate1 output + * source after USB reset. In this configuration gpio16 will be + * USB2HStop and gpio19 will be USB2DStop. For more details refer to + * table 34-7 of PPC460EX user manual. + */ + setbits32((vaddr + GPIO0_OSRH), 0x42000000); + setbits32((vaddr + GPIO0_TSRH), 0x42000000); +err_gpio: + iounmap(vaddr); +err_bcsr: + iounmap(bcsr); + return ret; +} +machine_device_initcall(canyonlands, ppc460ex_canyonlands_fixup); +define_machine(canyonlands) { + .name = "Canyonlands", + .probe = ppc460ex_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c index 88b9117fa69..6a4232bbdf8 100644 --- a/arch/powerpc/platforms/44x/ebony.c +++ b/arch/powerpc/platforms/44x/ebony.c @@ -54,7 +54,7 @@ static int __init ebony_probe(void) if (!of_flat_dt_is_compatible(root, "ibm,ebony")) return 0; - ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC); + pci_set_flags(PCI_REASSIGN_ALL_RSRC); return 1; } diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c index aa46e9d1e77..4241bc82580 100644 --- a/arch/powerpc/platforms/44x/iss4xx.c +++ b/arch/powerpc/platforms/44x/iss4xx.c @@ -71,8 +71,7 @@ static void __init iss4xx_init_irq(void) /* The MPIC driver will get everything it needs from the * device-tree, just pass 0 to all arguments */ - struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0, - " MPIC "); + struct mpic *mpic = mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); ppc_md.get_irq = mpic_get_irq; @@ -82,12 +81,12 @@ static void __init iss4xx_init_irq(void) } #ifdef CONFIG_SMP -static void __cpuinit smp_iss4xx_setup_cpu(int cpu) +static void smp_iss4xx_setup_cpu(int cpu) { mpic_setup_this_cpu(); } -static void __cpuinit smp_iss4xx_kick_cpu(int cpu) +static int smp_iss4xx_kick_cpu(int cpu) { struct device_node *cpunode = of_get_cpu_node(cpu, NULL); const u64 *spin_table_addr_prop; @@ -104,7 +103,7 @@ static void __cpuinit smp_iss4xx_kick_cpu(int cpu) NULL); if (spin_table_addr_prop == NULL) { pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu); - return; + return -ENOENT; } /* Assume it's mapped as part of the linear mapping. This is a bit @@ -117,6 +116,8 @@ static void __cpuinit smp_iss4xx_kick_cpu(int cpu) smp_wmb(); spin_table[1] = __pa(start_secondary_47x); mb(); + + return 0; } static struct smp_ops_t iss_smp_ops = { diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c index 7ddcba3b939..3ffb915446e 100644 --- a/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -52,8 +52,7 @@ machine_device_initcall(ppc44x_simple, ppc44x_device_probe); static char *board[] __initdata = { "amcc,arches", "amcc,bamboo", - "amcc,bluestone", - "amcc,canyonlands", + "apm,bluestone", "amcc,glacier", "ibm,ebony", "amcc,eiger", @@ -73,7 +72,7 @@ static int __init ppc44x_probe(void) for (i = 0; i < ARRAY_SIZE(board); i++) { if (of_flat_dt_is_compatible(root, board[i])) { - ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC); + pci_set_flags(PCI_REASSIGN_ALL_RSRC); return 1; } } diff --git a/arch/powerpc/platforms/44x/ppc476.c b/arch/powerpc/platforms/44x/ppc476.c new file mode 100644 index 00000000000..33986c1a05d --- /dev/null +++ b/arch/powerpc/platforms/44x/ppc476.c @@ -0,0 +1,299 @@ +/* + * PowerPC 476FPE board specific routines + * + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation + * + * Based on earlier code: + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003-2005 Zultys Technologies + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. + * Copyright © 2011 David Kliekamp IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/rtc.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/ppc4xx.h> +#include <asm/mpic.h> +#include <asm/mmu.h> + +#include <linux/pci.h> +#include <linux/i2c.h> + +static struct of_device_id ppc47x_of_bus[] __initdata = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,plb6", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +/* The EEPROM is missing and the default values are bogus. This forces USB in + * to EHCI mode */ +static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev) +{ + if (of_machine_is_compatible("ibm,currituck")) { + pci_write_config_dword(dev, 0xe0, 0x0114231f); + pci_write_config_dword(dev, 0xe4, 0x00006c40); + } +} +DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup); + +/* Akebono has an AVR microcontroller attached to the I2C bus + * which is used to power off/reset the system. */ + +/* AVR I2C Commands */ +#define AVR_PWRCTL_CMD (0x26) + +/* Flags for the power control I2C commands */ +#define AVR_PWRCTL_PWROFF (0x01) +#define AVR_PWRCTL_RESET (0x02) + +static struct i2c_client *avr_i2c_client; +static void avr_halt_system(int pwrctl_flags) +{ + /* Request the AVR to reset the system */ + i2c_smbus_write_byte_data(avr_i2c_client, + AVR_PWRCTL_CMD, pwrctl_flags); + + /* Wait for system to be reset */ + while (1) + ; +} + +static void avr_power_off_system(void) +{ + avr_halt_system(AVR_PWRCTL_PWROFF); +} + +static void avr_reset_system(char *cmd) +{ + avr_halt_system(AVR_PWRCTL_RESET); +} + +static int avr_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + avr_i2c_client = client; + ppc_md.restart = avr_reset_system; + ppc_md.power_off = avr_power_off_system; + return 0; +} + +static const struct i2c_device_id avr_id[] = { + { "akebono-avr", 0 }, + { } +}; + +static struct i2c_driver avr_driver = { + .driver = { + .name = "akebono-avr", + }, + .probe = avr_probe, + .id_table = avr_id, +}; + +static int __init ppc47x_device_probe(void) +{ + i2c_add_driver(&avr_driver); + of_platform_bus_probe(NULL, ppc47x_of_bus, NULL); + + return 0; +} +machine_device_initcall(ppc47x, ppc47x_device_probe); + +static void __init ppc47x_init_irq(void) +{ + struct device_node *np; + + /* Find top level interrupt controller */ + for_each_node_with_property(np, "interrupt-controller") { + if (of_get_property(np, "interrupts", NULL) == NULL) + break; + } + if (np == NULL) + panic("Can't find top level interrupt controller"); + + /* Check type and do appropriate initialization */ + if (of_device_is_compatible(np, "chrp,open-pic")) { + /* The MPIC driver will get everything it needs from the + * device-tree, just pass 0 to all arguments + */ + struct mpic *mpic = + mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); + ppc_md.get_irq = mpic_get_irq; + } else + panic("Unrecognized top level interrupt controller"); +} + +#ifdef CONFIG_SMP +static void smp_ppc47x_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} + +static int smp_ppc47x_kick_cpu(int cpu) +{ + struct device_node *cpunode = of_get_cpu_node(cpu, NULL); + const u64 *spin_table_addr_prop; + u32 *spin_table; + extern void start_secondary_47x(void); + + BUG_ON(cpunode == NULL); + + /* Assume spin table. We could test for the enable-method in + * the device-tree but currently there's little point as it's + * our only supported method + */ + spin_table_addr_prop = + of_get_property(cpunode, "cpu-release-addr", NULL); + + if (spin_table_addr_prop == NULL) { + pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", + cpu); + return 1; + } + + /* Assume it's mapped as part of the linear mapping. This is a bit + * fishy but will work fine for now + * + * XXX: Is there any reason to assume differently? + */ + spin_table = (u32 *)__va(*spin_table_addr_prop); + pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table); + + spin_table[3] = cpu; + smp_wmb(); + spin_table[1] = __pa(start_secondary_47x); + mb(); + + return 0; +} + +static struct smp_ops_t ppc47x_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .setup_cpu = smp_ppc47x_setup_cpu, + .kick_cpu = smp_ppc47x_kick_cpu, + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +}; + +static void __init ppc47x_smp_init(void) +{ + if (mmu_has_feature(MMU_FTR_TYPE_47x)) + smp_ops = &ppc47x_smp_ops; +} + +#else /* CONFIG_SMP */ +static void __init ppc47x_smp_init(void) { } +#endif /* CONFIG_SMP */ + +static void __init ppc47x_setup_arch(void) +{ + + /* No need to check the DMA config as we /know/ our windows are all of + * RAM. Lets hope that doesn't change */ + swiotlb_detect_4g(); + + ppc47x_smp_init(); +} + +static int board_rev = -1; +static int __init ppc47x_get_board_rev(void) +{ + int reg; + u8 *fpga; + struct device_node *np = NULL; + + if (of_machine_is_compatible("ibm,currituck")) { + np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga"); + reg = 0; + } else if (of_machine_is_compatible("ibm,akebono")) { + np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga"); + reg = 2; + } + + if (!np) + goto fail; + + fpga = (u8 *) of_iomap(np, 0); + of_node_put(np); + if (!fpga) + goto fail; + + board_rev = ioread8(fpga + reg) & 0x03; + pr_info("%s: Found board revision %d\n", __func__, board_rev); + iounmap(fpga); + return 0; + +fail: + pr_info("%s: Unable to find board revision\n", __func__); + return 0; +} +machine_arch_initcall(ppc47x, ppc47x_get_board_rev); + +/* Use USB controller should have been hardware swizzled but it wasn't :( */ +static void ppc47x_pci_irq_fixup(struct pci_dev *dev) +{ + if (dev->vendor == 0x1033 && (dev->device == 0x0035 || + dev->device == 0x00e0)) { + if (board_rev == 0) { + dev->irq = irq_create_mapping(NULL, 47); + pr_info("%s: Mapping irq %d\n", __func__, dev->irq); + } else if (board_rev == 2) { + dev->irq = irq_create_mapping(NULL, 49); + pr_info("%s: Mapping irq %d\n", __func__, dev->irq); + } else { + pr_alert("%s: Unknown board revision\n", __func__); + } + } +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init ppc47x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "ibm,akebono")) + return 1; + + if (of_flat_dt_is_compatible(root, "ibm,currituck")) { + ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup; + return 1; + } + + return 0; +} + +define_machine(ppc47x) { + .name = "PowerPC 47x", + .probe = ppc47x_probe, + .progress = udbg_progress, + .init_IRQ = ppc47x_init_irq, + .setup_arch = ppc47x_setup_arch, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/ppc476_modules.lds b/arch/powerpc/platforms/44x/ppc476_modules.lds new file mode 100644 index 00000000000..9fec5d34ba8 --- /dev/null +++ b/arch/powerpc/platforms/44x/ppc476_modules.lds @@ -0,0 +1,15 @@ +SECTIONS +{ + .text : ALIGN(4096) + { + *(.text .text.* .fixup) + } + .init.text : ALIGN(4096) + { + *(.init.text .init.text.*) + } + .exit.text : ALIGN(4096) + { + *(.exit.text .exit.text.*) + } +} diff --git a/arch/powerpc/platforms/44x/sam440ep.c b/arch/powerpc/platforms/44x/sam440ep.c index a78e8eb6da4..9e09b835758 100644 --- a/arch/powerpc/platforms/44x/sam440ep.c +++ b/arch/powerpc/platforms/44x/sam440ep.c @@ -51,7 +51,7 @@ static int __init sam440ep_probe(void) if (!of_flat_dt_is_compatible(root, "acube,sam440ep")) return 0; - ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC); + pci_set_flags(PCI_REASSIGN_ALL_RSRC); return 1; } diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c index ba4a6e388a4..1fdb8748638 100644 --- a/arch/powerpc/platforms/44x/virtex_ml510.c +++ b/arch/powerpc/platforms/44x/virtex_ml510.c @@ -5,7 +5,7 @@ /** * ml510_ail_quirk */ -static void __devinit ml510_ali_quirk(struct pci_dev *dev) +static void ml510_ali_quirk(struct pci_dev *dev) { /* Enable the IDE controller */ pci_write_config_byte(dev, 0x58, 0x4c); diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 8f771395f42..534574a97ec 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -16,8 +16,8 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/of_gpio.h> -#include <linux/of_i2c.h> #include <linux/slab.h> +#include <linux/export.h> #include <asm/machdep.h> #include <asm/prom.h> |