diff options
Diffstat (limited to 'arch/powerpc/platforms/44x/Kconfig')
| -rw-r--r-- | arch/powerpc/platforms/44x/Kconfig | 222 |
1 files changed, 184 insertions, 38 deletions
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 3496bc05058..4d88f6a1905 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -1,3 +1,12 @@ +config PPC_47x + bool "Support for 47x variant" + depends on 44x + default n + select MPIC + help + This option enables support for the 47x family of processors and is + not currently compatible with other 44x or 46x varients + config BAMBOO bool "Bamboo" depends on 44x @@ -8,6 +17,19 @@ config BAMBOO help This option enables support for the IBM PPC440EP evaluation board. +config BLUESTONE + bool "Bluestone" + depends on 44x + default n + select PPC44x_SIMPLE + select APM821xx + select PCI_MSI + select PPC4xx_MSI + select PPC4xx_PCI_EXPRESS + select IBM_EMAC_RGMII + help + This option enables support for the APM APM821xx Evaluation board. + config EBONY bool "Ebony" depends on 44x @@ -55,6 +77,8 @@ config KATMAI select 440SPe select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI help This option enables support for the AMCC PPC440SPe evaluation board. @@ -96,12 +120,13 @@ config CANYONLANDS bool "Canyonlands" depends on 44x default n - select PPC44x_SIMPLE select 460EX select PCI select PPC4xx_PCI_EXPRESS - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select PCI_MSI + select PPC4xx_MSI + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII help This option enables support for the AMCC PPC460EX evaluation board. @@ -113,11 +138,36 @@ config GLACIER select 460EX # Odd since it uses 460GT but the effects are the same select PCI select PPC4xx_PCI_EXPRESS - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII help This option enables support for the AMCC PPC460GT evaluation board. +config REDWOOD + bool "Redwood" + depends on 44x + default n + select PPC44x_SIMPLE + select 460SX + select PCI + select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI + help + This option enables support for the AMCC PPC460SX Redwood board. + +config EIGER + bool "Eiger" + depends on 44x + default n + select PPC44x_SIMPLE + select 460SX + select PCI + select PPC4xx_PCI_EXPRESS + select IBM_EMAC_RGMII + help + This option enables support for the AMCC PPC460SX evaluation board. + config YOSEMITE bool "Yosemite" depends on 44x @@ -128,24 +178,68 @@ config YOSEMITE help This option enables support for the AMCC PPC440EP evaluation board. -#config LUAN -# bool "Luan" -# depends on 44x -# default n -# select 440SP -# help -# This option enables support for the IBM PPC440SP evaluation board. - -#config OCOTEA -# bool "Ocotea" -# depends on 44x -# default n -# select 440GX -# help -# This option enables support for the IBM PPC440GX evaluation board. +config ISS4xx + bool "ISS 4xx Simulator" + depends on (44x || 40x) + default n + select 405GP if 40x + select 440GP if 44x && !PPC_47x + select PPC_FPU + select OF_RTC + help + This option enables support for the IBM ISS simulation environment + +config CURRITUCK + bool "IBM Currituck (476fpe) Support" + depends on PPC_47x + default n + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + help + This option enables support for the IBM Currituck (476fpe) evaluation board + +config AKEBONO + bool "IBM Akebono (476gtr) Support" + depends on PPC_47x + default n + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_HSTA_MSI + select I2C + select I2C_IBM_IIC + select NETDEVICES + select ETHERNET + select NET_VENDOR_IBM + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII_WOL + select USB + select USB_OHCI_HCD_PLATFORM + select USB_EHCI_HCD_PLATFORM + select MMC_SDHCI + select MMC_SDHCI_PLTFM + select MMC_SDHCI_OF_476GTR + select ATA + select SATA_AHCI_PLATFORM + help + This option enables support for the IBM Akebono (476gtr) evaluation board + + +config ICON + bool "Icon" + depends on 44x + default n + select PPC44x_SIMPLE + select 440SPe + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC440SPe evaluation board. config XILINX_VIRTEX440_GENERIC_BOARD - bool "Generic Xilinx Virtex 440 board" + bool "Generic Xilinx Virtex 5 FXT board support" depends on 44x default n select XILINX_VIRTEX_5_FXT @@ -160,6 +254,17 @@ config XILINX_VIRTEX440_GENERIC_BOARD Most Virtex 5 designs should use this unless it needs to do some special configuration at board probe time. +config XILINX_ML510 + bool "Xilinx ML510 extra support" + depends on XILINX_VIRTEX440_GENERIC_BOARD + select PPC_PCI_CHOICE + select XILINX_PCI if PCI + select PPC_INDIRECT_PCI if PCI + select PPC_I8259 if PCI + help + This option enables extra support for features on the Xilinx ML510 + board. The ML510 has a PCI bus with ALI south bridge. + config PPC44x_SIMPLE bool "Simple PowerPC 44x board support" depends on 44x @@ -171,54 +276,94 @@ config PPC4xx_GPIO bool "PPC4xx GPIO support" depends on 44x select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO help Enable gpiolib support for ppc440 based boards +config PPC4xx_OCM + bool "PPC4xx On Chip Memory (OCM) support" + depends on 4xx + select PPC_LIB_RHEAP + help + Enable OCM support for PowerPC 4xx platforms with on chip memory, + OCM provides the fast place for memory access to improve performance. + # 44x specific CPU modules, selected based on the board above. config 440EP bool select PPC_FPU select IBM440EP_ERR42 - select IBM_NEW_EMAC_ZMII - select USB_ARCH_HAS_OHCI + select IBM_EMAC_ZMII config 440EPX bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC config 440GRX bool - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII config 440GP bool - select IBM_NEW_EMAC_ZMII + select IBM_EMAC_ZMII config 440GX bool - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII #test only - select IBM_NEW_EMAC_TAH #test only + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII #test only + select IBM_EMAC_TAH #test only config 440SP bool config 440SPe bool - select IBM_NEW_EMAC_EMAC4 + select IBM_EMAC_EMAC4 config 460EX bool select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_TAH + select IBM_EMAC_EMAC4 + select IBM_EMAC_TAH + +config 460SX + bool + select PPC_FPU + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII + select IBM_EMAC_ZMII + select IBM_EMAC_TAH + +config 476FPE + bool + select PPC_FPU + +config APM821xx + bool + select PPC_FPU + select IBM_EMAC_EMAC4 + select IBM_EMAC_TAH + +config 476FPE_ERR46 + depends on 476FPE + bool "Enable linker work around for PPC476FPE errata #46" + help + This option enables a work around for an icache bug on 476 + that can cause execution of stale instructions when falling + through pages (IBM errata #46). It requires a recent version + of binutils which supports the --ppc476-workaround option. + + The work around enables the appropriate linker options and + ensures that all module output sections are aligned to 4K + page boundaries. The work around is only required when + building modules. # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 @@ -227,6 +372,7 @@ config IBM440EP_ERR42 # Xilinx specific config options. config XILINX_VIRTEX bool + select DEFAULT_UIMAGE # Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above config XILINX_VIRTEX_5_FXT |