diff options
Diffstat (limited to 'arch/powerpc/mm/init_32.c')
| -rw-r--r-- | arch/powerpc/mm/init_32.c | 205 |
1 files changed, 66 insertions, 139 deletions
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 977cb1ee5e7..cff59f1bec2 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -30,37 +30,48 @@ #include <linux/highmem.h> #include <linux/initrd.h> #include <linux/pagemap.h> +#include <linux/memblock.h> +#include <linux/gfp.h> +#include <linux/slab.h> +#include <linux/hugetlb.h> #include <asm/pgalloc.h> #include <asm/prom.h> #include <asm/io.h> -#include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/mmu.h> #include <asm/smp.h> #include <asm/machdep.h> #include <asm/btext.h> #include <asm/tlb.h> -#include <asm/lmb.h> #include <asm/sections.h> +#include <asm/hugetlb.h> #include "mmu_decl.h" #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL) -/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */ -#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE)) -#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL" +/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */ +#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET)) +#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START" #endif #endif #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); +phys_addr_t total_memory; +phys_addr_t total_lowmem; -unsigned long total_memory; -unsigned long total_lowmem; +phys_addr_t memstart_addr = (phys_addr_t)~0ull; +EXPORT_SYMBOL(memstart_addr); +phys_addr_t kernstart_addr; +EXPORT_SYMBOL(kernstart_addr); -unsigned long ppc_memstart; -unsigned long ppc_memoffset = PAGE_OFFSET; +#ifdef CONFIG_RELOCATABLE_PPC32 +/* Used in __va()/__pa() */ +long long virt_phys_offset; +EXPORT_SYMBOL(virt_phys_offset); +#endif + +phys_addr_t lowmem_end_addr; int boot_mapsize; #ifdef CONFIG_PPC_PMAC @@ -68,21 +79,11 @@ unsigned long agp_special_page; EXPORT_SYMBOL(agp_special_page); #endif -#ifdef CONFIG_HIGHMEM -pte_t *kmap_pte; -pgprot_t kmap_prot; - -EXPORT_SYMBOL(kmap_prot); -EXPORT_SYMBOL(kmap_pte); -#endif - void MMU_init(void); /* XXX should be in current.h -- paulus */ extern struct task_struct *current_set[NR_CPUS]; -extern int init_bootmem_done; - /* * this tells the system to map all of ram with the segregs * (i.e. page tables) instead of the bats. @@ -91,14 +92,13 @@ extern int init_bootmem_done; int __map_without_bats; int __map_without_ltlbs; -/* max amount of low RAM to map in */ -unsigned long __max_low_memory = MAX_LOW_MEM; - /* - * limit of what is accessible with initial MMU setup - - * 256MB usually, but only 16MB on 601. + * This tells the system to allow ioremapping memory marked as reserved. */ -unsigned long __initial_memory_limit = 0x10000000; +int __allow_ioremap_reserved; + +/* max amount of low RAM to map in */ +unsigned long __max_low_memory = MAX_LOW_MEM; /* * Check for command-line options that affect what MMU_init will do. @@ -129,24 +129,26 @@ void __init MMU_init(void) if (ppc_md.progress) ppc_md.progress("MMU:enter", 0x111); - /* 601 can only access 16MB at the moment */ - if (PVR_VER(mfspr(SPRN_PVR)) == 1) - __initial_memory_limit = 0x01000000; - /* 8xx can only access 8MB at the moment */ - if (PVR_VER(mfspr(SPRN_PVR)) == 0x50) - __initial_memory_limit = 0x00800000; - /* parse args from command line */ MMU_setup(); - if (lmb.memory.cnt > 1) { - lmb.memory.cnt = 1; - lmb_analyze(); + /* + * Reserve gigantic pages for hugetlb. This MUST occur before + * lowmem_end_addr is initialized below. + */ + reserve_hugetlb_gpages(); + + if (memblock.memory.cnt > 1) { +#ifndef CONFIG_WII + memblock_enforce_memory_limit(memblock.memory.regions[0].size); printk(KERN_WARNING "Only using first contiguous memory region"); +#else + wii_memory_fixups(); +#endif } - total_memory = lmb_end_of_DRAM(); - total_lowmem = total_memory; + total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr; + lowmem_end_addr = memstart_addr + total_lowmem; #ifdef CONFIG_FSL_BOOKE /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB @@ -157,10 +159,10 @@ void __init MMU_init(void) if (total_lowmem > __max_low_memory) { total_lowmem = __max_low_memory; + lowmem_end_addr = memstart_addr + total_lowmem; #ifndef CONFIG_HIGHMEM total_memory = total_lowmem; - lmb_enforce_memory_limit(total_lowmem); - lmb_analyze(); + memblock_enforce_memory_limit(total_lowmem); #endif /* CONFIG_HIGHMEM */ } @@ -174,21 +176,12 @@ void __init MMU_init(void) ppc_md.progress("MMU:mapin", 0x301); mapin_ram(); -#ifdef CONFIG_HIGHMEM - ioremap_base = PKMAP_BASE; -#else - ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */ -#endif /* CONFIG_HIGHMEM */ - ioremap_bot = ioremap_base; + /* Initialize early top-down ioremap allocator */ + ioremap_bot = IOREMAP_TOP; /* Map in I/O resources */ if (ppc_md.progress) ppc_md.progress("MMU:setio", 0x302); - if (ppc_md.setup_io_mappings) - ppc_md.setup_io_mappings(); - - /* Initialize the context management stuff */ - mmu_context_init(); if (ppc_md.progress) ppc_md.progress("MMU:exit", 0x211); @@ -197,101 +190,35 @@ void __init MMU_init(void) #ifdef CONFIG_BOOTX_TEXT btext_unmap(); #endif + + /* Shortly after that, the entire linear mapping will be available */ + memblock_set_current_limit(lowmem_end_addr); } /* This is only called until mem_init is done. */ void __init *early_get_page(void) { - void *p; - - if (init_bootmem_done) { - p = alloc_bootmem_pages(PAGE_SIZE); - } else { - p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE, - __initial_memory_limit)); - } - return p; -} - -/* Free up now-unused memory */ -static void free_sec(unsigned long start, unsigned long end, const char *name) -{ - unsigned long cnt = 0; - - while (start < end) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); - cnt++; - start += PAGE_SIZE; - } - if (cnt) { - printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name); - totalram_pages += cnt; - } -} - -void free_initmem(void) -{ -#define FREESEC(TYPE) \ - free_sec((unsigned long)(&__ ## TYPE ## _begin), \ - (unsigned long)(&__ ## TYPE ## _end), \ - #TYPE); - - printk ("Freeing unused kernel memory:"); - FREESEC(init); - printk("\n"); - ppc_md.progress = NULL; -#undef FREESEC + if (init_bootmem_done) + return alloc_bootmem_pages(PAGE_SIZE); + else + return __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE)); } -#ifdef CONFIG_BLK_DEV_INITRD -void free_initrd_mem(unsigned long start, unsigned long end) +#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */ +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) { - if (start < end) - printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); - for (; start < end; start += PAGE_SIZE) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); - totalram_pages++; - } -} + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + +#ifdef CONFIG_PIN_TLB + /* 8xx can only access 24MB at the moment */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000)); +#else + /* 8xx can only access 8MB at the moment */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000)); #endif - -#ifdef CONFIG_PROC_KCORE -static struct kcore_list kcore_vmem; - -static int __init setup_kcore(void) -{ - int i; - - for (i = 0; i < lmb.memory.cnt; i++) { - unsigned long base; - unsigned long size; - struct kcore_list *kcore_mem; - - base = lmb.memory.region[i].base; - size = lmb.memory.region[i].size; - - kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC); - if (!kcore_mem) - panic("%s: kmalloc failed\n", __FUNCTION__); - - /* must stay under 32 bits */ - if ( 0xfffffffful - (unsigned long)__va(base) < size) { - size = 0xfffffffful - (unsigned long)(__va(base)); - printk(KERN_DEBUG "setup_kcore: restrict size=%lx\n", - size); - } - - kclist_add(kcore_mem, __va(base), size); - } - - kclist_add(&kcore_vmem, (void *)VMALLOC_START, - VMALLOC_END-VMALLOC_START); - - return 0; } -module_init(setup_kcore); -#endif +#endif /* CONFIG_8xx */ |
