diff options
Diffstat (limited to 'arch/powerpc/mm/fsl_booke_mmu.c')
| -rw-r--r-- | arch/powerpc/mm/fsl_booke_mmu.c | 130 |
1 files changed, 109 insertions, 21 deletions
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index f7802c8bba0..94cd728166d 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -52,6 +52,7 @@ #include <asm/smp.h> #include <asm/machdep.h> #include <asm/setup.h> +#include <asm/paca.h> #include "mmu_decl.h" @@ -101,17 +102,17 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa) /* * Set up a variable-size TLB entry (tlbcam). The parameters are not checked; - * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus - * that support extended page sizes). Note that while some cpus support a - * page size of 4G, we don't allow its use here. + * in particular size must be a power of 4 between 4k and the max supported by + * an implementation; max may further be limited by what can be represented in + * an unsigned long (for example, 32-bit implementations cannot support a 4GB + * size). */ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, unsigned long size, unsigned long flags, unsigned int pid) { - unsigned int tsize, lz; + unsigned int tsize; - asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size)); - tsize = 21 - lz; + tsize = __ilog2(size) - 10; #ifdef CONFIG_SMP if ((flags & _PAGE_NO_CACHE) == 0) @@ -146,29 +147,42 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, loadcam_entry(index); } -unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) +unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, + phys_addr_t phys) +{ + unsigned int camsize = __ilog2(ram); + unsigned int align = __ffs(virt | phys); + unsigned long max_cam; + + if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) { + /* Convert (4^max) kB to (2^max) bytes */ + max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10; + camsize &= ~1U; + align &= ~1U; + } else { + /* Convert (2^max) kB to (2^max) bytes */ + max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10; + } + + if (camsize > align) + camsize = align; + if (camsize > max_cam) + camsize = max_cam; + + return 1UL << camsize; +} + +static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt, + unsigned long ram, int max_cam_idx) { int i; - unsigned long virt = PAGE_OFFSET; - phys_addr_t phys = memstart_addr; unsigned long amount_mapped = 0; - unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf; - - /* Convert (4^max) kB to (2^max) bytes */ - max_cam = max_cam * 2 + 10; /* Calculate CAM values */ for (i = 0; ram && i < max_cam_idx; i++) { - unsigned int camsize = __ilog2(ram) & ~1U; - unsigned int align = __ffs(virt | phys) & ~1U; unsigned long cam_sz; - if (camsize > align) - camsize = align; - if (camsize > max_cam) - camsize = max_cam; - - cam_sz = 1UL << camsize; + cam_sz = calc_cam_sz(ram, virt, phys); settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0); ram -= cam_sz; @@ -178,9 +192,23 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) } tlbcam_index = i; +#ifdef CONFIG_PPC64 + get_paca()->tcd.esel_next = i; + get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; + get_paca()->tcd.esel_first = i; +#endif + return amount_mapped; } +unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) +{ + unsigned long virt = PAGE_OFFSET; + phys_addr_t phys = memstart_addr; + + return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx); +} + #ifdef CONFIG_PPC32 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) @@ -208,7 +236,9 @@ void __init adjust_total_lowmem(void) /* adjust lowmem size to __max_low_memory */ ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem); + i = switch_to_as1(); __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM); + restore_to_as0(i, 0, 0, 1); pr_info("Memory CAM mapping: "); for (i = 0; i < tlbcam_index - 1; i++) @@ -227,4 +257,62 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base, /* 64M mapped initially according to head_fsl_booke.S */ memblock_set_current_limit(min_t(u64, limit, 0x04000000)); } + +#ifdef CONFIG_RELOCATABLE +int __initdata is_second_reloc; +notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start) +{ + unsigned long base = KERNELBASE; + + kernstart_addr = start; + if (is_second_reloc) { + virt_phys_offset = PAGE_OFFSET - memstart_addr; + return; + } + + /* + * Relocatable kernel support based on processing of dynamic + * relocation entries. Before we get the real memstart_addr, + * We will compute the virt_phys_offset like this: + * virt_phys_offset = stext.run - kernstart_addr + * + * stext.run = (KERNELBASE & ~0x3ffffff) + + * (kernstart_addr & 0x3ffffff) + * When we relocate, we have : + * + * (kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff) + * + * hence: + * virt_phys_offset = (KERNELBASE & ~0x3ffffff) - + * (kernstart_addr & ~0x3ffffff) + * + */ + start &= ~0x3ffffff; + base &= ~0x3ffffff; + virt_phys_offset = base - start; + early_get_first_memblock_info(__va(dt_ptr), NULL); + /* + * We now get the memstart_addr, then we should check if this + * address is the same as what the PAGE_OFFSET map to now. If + * not we have to change the map of PAGE_OFFSET to memstart_addr + * and do a second relocation. + */ + if (start != memstart_addr) { + int n; + long offset = start - memstart_addr; + + is_second_reloc = 1; + n = switch_to_as1(); + /* map a 64M area for the second relocation */ + if (memstart_addr > start) + map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM); + else + map_mem_in_cams_addr(start, PAGE_OFFSET + offset, + 0x4000000, CONFIG_LOWMEM_CAM_NUM); + restore_to_as0(n, offset, __va(dt_ptr), 1); + /* We should never reach here */ + panic("Relocation error"); + } +} +#endif #endif |