diff options
Diffstat (limited to 'arch/powerpc/kernel/signal_64.c')
| -rw-r--r-- | arch/powerpc/kernel/signal_64.c | 444 |
1 files changed, 390 insertions, 54 deletions
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 27c4a4584f8..97c1e4b683f 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -23,7 +23,7 @@ #include <linux/stddef.h> #include <linux/elf.h> #include <linux/ptrace.h> -#include <linux/module.h> +#include <linux/ratelimit.h> #include <asm/sigcontext.h> #include <asm/ucontext.h> @@ -33,10 +33,11 @@ #include <asm/cacheflush.h> #include <asm/syscalls.h> #include <asm/vdso.h> +#include <asm/switch_to.h> +#include <asm/tm.h> #include "signal.h" -#define DEBUG_SIG 0 #define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) #define FP_REGS_SIZE sizeof(elf_fpregset_t) @@ -55,13 +56,16 @@ struct rt_sigframe { /* sys_rt_sigreturn requires the ucontext be the first field */ struct ucontext uc; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + struct ucontext uc_transact; +#endif unsigned long _unused[2]; unsigned int tramp[TRAMP_SIZE]; struct siginfo __user *pinfo; void __user *puc; struct siginfo info; - /* 64 bit ABI allows for 288 bytes below sp before decrementing it. */ - char abigap[288]; + /* New 64 bit little-endian ABI allows redzone of 512 bytes below sp */ + char abigap[USER_REDZONE_SIZE]; } __attribute__ ((aligned (16))); static const char fmt32[] = KERN_INFO \ @@ -82,7 +86,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, * the context). This is very important because we must ensure we * don't lose the VRSAVE content that may have been set prior to * the process doing its first vector operation - * Userland shall check AT_HWCAP to know wether it can rely on the + * Userland shall check AT_HWCAP to know whether it can rely on the * v_regs pointer or not */ #ifdef CONFIG_ALTIVEC @@ -91,8 +95,6 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long msr = regs->msr; long err = 0; - flush_fp_to_thread(current); - #ifdef CONFIG_ALTIVEC err |= __put_user(v_regs, &sc->v_regs); @@ -100,7 +102,8 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, if (current->thread.used_vr) { flush_altivec_to_thread(current); /* Copy 33 vec registers (vr0..31 and vscr) to the stack */ - err |= __copy_to_user(v_regs, current->thread.vr, 33 * sizeof(vector128)); + err |= __copy_to_user(v_regs, ¤t->thread.vr_state, + 33 * sizeof(vector128)); /* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg) * contains valid data. */ @@ -109,6 +112,8 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, /* We always copy to/from vrsave, it's 0 if we don't have or don't * use altivec. */ + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + current->thread.vrsave = mfspr(SPRN_VRSAVE); err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); #else /* CONFIG_ALTIVEC */ err |= __put_user(0, &sc->v_regs); @@ -116,6 +121,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, flush_fp_to_thread(current); /* copy fpr regs and fpscr */ err |= copy_fpr_to_user(&sc->fp_regs, current); + + /* + * Clear the MSR VSX bit to indicate there is no valid state attached + * to this context, except in the specific case below where we set it. + */ + msr &= ~MSR_VSX; #ifdef CONFIG_VSX /* * Copy VSX low doubleword to local buffer for formatting, @@ -144,6 +155,145 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, return err; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * As above, but Transactional Memory is in use, so deliver sigcontexts + * containing checkpointed and transactional register states. + * + * To do this, we treclaim (done before entering here) to gather both sets of + * registers and set up the 'normal' sigcontext registers with rolled-back + * register values such that a simple signal handler sees a correct + * checkpointed register state. If interested, a TM-aware sighandler can + * examine the transactional registers in the 2nd sigcontext to determine the + * real origin of the signal. + */ +static long setup_tm_sigcontexts(struct sigcontext __user *sc, + struct sigcontext __user *tm_sc, + struct pt_regs *regs, + int signr, sigset_t *set, unsigned long handler) +{ + /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the + * process never used altivec yet (MSR_VEC is zero in pt_regs of + * the context). This is very important because we must ensure we + * don't lose the VRSAVE content that may have been set prior to + * the process doing its first vector operation + * Userland shall check AT_HWCAP to know wether it can rely on the + * v_regs pointer or not. + */ +#ifdef CONFIG_ALTIVEC + elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *) + (((unsigned long)sc->vmx_reserve + 15) & ~0xful); + elf_vrreg_t __user *tm_v_regs = (elf_vrreg_t __user *) + (((unsigned long)tm_sc->vmx_reserve + 15) & ~0xful); +#endif + unsigned long msr = regs->msr; + long err = 0; + + BUG_ON(!MSR_TM_ACTIVE(regs->msr)); + + /* Remove TM bits from thread's MSR. The MSR in the sigcontext + * just indicates to userland that we were doing a transaction, but we + * don't want to return in transactional state. This also ensures + * that flush_fp_to_thread won't set TIF_RESTORE_TM again. + */ + regs->msr &= ~MSR_TS_MASK; + + flush_fp_to_thread(current); + +#ifdef CONFIG_ALTIVEC + err |= __put_user(v_regs, &sc->v_regs); + err |= __put_user(tm_v_regs, &tm_sc->v_regs); + + /* save altivec registers */ + if (current->thread.used_vr) { + flush_altivec_to_thread(current); + /* Copy 33 vec registers (vr0..31 and vscr) to the stack */ + err |= __copy_to_user(v_regs, ¤t->thread.vr_state, + 33 * sizeof(vector128)); + /* If VEC was enabled there are transactional VRs valid too, + * else they're a copy of the checkpointed VRs. + */ + if (msr & MSR_VEC) + err |= __copy_to_user(tm_v_regs, + ¤t->thread.transact_vr, + 33 * sizeof(vector128)); + else + err |= __copy_to_user(tm_v_regs, + ¤t->thread.vr_state, + 33 * sizeof(vector128)); + + /* set MSR_VEC in the MSR value in the frame to indicate + * that sc->v_reg contains valid data. + */ + msr |= MSR_VEC; + } + /* We always copy to/from vrsave, it's 0 if we don't have or don't + * use altivec. + */ + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + current->thread.vrsave = mfspr(SPRN_VRSAVE); + err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); + if (msr & MSR_VEC) + err |= __put_user(current->thread.transact_vrsave, + (u32 __user *)&tm_v_regs[33]); + else + err |= __put_user(current->thread.vrsave, + (u32 __user *)&tm_v_regs[33]); + +#else /* CONFIG_ALTIVEC */ + err |= __put_user(0, &sc->v_regs); + err |= __put_user(0, &tm_sc->v_regs); +#endif /* CONFIG_ALTIVEC */ + + /* copy fpr regs and fpscr */ + err |= copy_fpr_to_user(&sc->fp_regs, current); + if (msr & MSR_FP) + err |= copy_transact_fpr_to_user(&tm_sc->fp_regs, current); + else + err |= copy_fpr_to_user(&tm_sc->fp_regs, current); + +#ifdef CONFIG_VSX + /* + * Copy VSX low doubleword to local buffer for formatting, + * then out to userspace. Update v_regs to point after the + * VMX data. + */ + if (current->thread.used_vsr) { + __giveup_vsx(current); + v_regs += ELF_NVRREG; + tm_v_regs += ELF_NVRREG; + + err |= copy_vsx_to_user(v_regs, current); + + if (msr & MSR_VSX) + err |= copy_transact_vsx_to_user(tm_v_regs, current); + else + err |= copy_vsx_to_user(tm_v_regs, current); + + /* set MSR_VSX in the MSR value in the frame to + * indicate that sc->vs_reg) contains valid data. + */ + msr |= MSR_VSX; + } +#endif /* CONFIG_VSX */ + + err |= __put_user(&sc->gp_regs, &sc->regs); + err |= __put_user(&tm_sc->gp_regs, &tm_sc->regs); + WARN_ON(!FULL_REGS(regs)); + err |= __copy_to_user(&tm_sc->gp_regs, regs, GP_REGS_SIZE); + err |= __copy_to_user(&sc->gp_regs, + ¤t->thread.ckpt_regs, GP_REGS_SIZE); + err |= __put_user(msr, &tm_sc->gp_regs[PT_MSR]); + err |= __put_user(msr, &sc->gp_regs[PT_MSR]); + err |= __put_user(signr, &sc->signal); + err |= __put_user(handler, &sc->handler); + if (set != NULL) + err |= __put_user(set->sig[0], &sc->oldmask); + + return err; +} +#endif + /* * Restore the sigcontext from the signal frame. */ @@ -211,16 +361,18 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, if (v_regs && !access_ok(VERIFY_READ, v_regs, 34 * sizeof(vector128))) return -EFAULT; /* Copy 33 vec registers (vr0..31 and vscr) from the stack */ - if (v_regs != 0 && (msr & MSR_VEC) != 0) - err |= __copy_from_user(current->thread.vr, v_regs, + if (v_regs != NULL && (msr & MSR_VEC) != 0) + err |= __copy_from_user(¤t->thread.vr_state, v_regs, 33 * sizeof(vector128)); else if (current->thread.used_vr) - memset(current->thread.vr, 0, 33 * sizeof(vector128)); + memset(¤t->thread.vr_state, 0, 33 * sizeof(vector128)); /* Always get VRSAVE back */ - if (v_regs != 0) + if (v_regs != NULL) err |= __get_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); else current->thread.vrsave = 0; + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + mtspr(SPRN_VRSAVE, current->thread.vrsave); #endif /* CONFIG_ALTIVEC */ /* restore floating point */ err |= copy_fpr_from_user(current, &sc->fp_regs); @@ -235,10 +387,165 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, err |= copy_vsx_from_user(current, v_regs); else for (i = 0; i < 32 ; i++) - current->thread.fpr[i][TS_VSRLOWOFFSET] = 0; + current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0; +#endif + return err; +} + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * Restore the two sigcontexts from the frame of a transactional processes. + */ + +static long restore_tm_sigcontexts(struct pt_regs *regs, + struct sigcontext __user *sc, + struct sigcontext __user *tm_sc) +{ +#ifdef CONFIG_ALTIVEC + elf_vrreg_t __user *v_regs, *tm_v_regs; +#endif + unsigned long err = 0; + unsigned long msr; +#ifdef CONFIG_VSX + int i; #endif + /* copy the GPRs */ + err |= __copy_from_user(regs->gpr, tm_sc->gp_regs, sizeof(regs->gpr)); + err |= __copy_from_user(¤t->thread.ckpt_regs, sc->gp_regs, + sizeof(regs->gpr)); + + /* + * TFHAR is restored from the checkpointed 'wound-back' ucontext's NIP. + * TEXASR was set by the signal delivery reclaim, as was TFIAR. + * Users doing anything abhorrent like thread-switching w/ signals for + * TM-Suspended code will have to back TEXASR/TFIAR up themselves. + * For the case of getting a signal and simply returning from it, + * we don't need to re-copy them here. + */ + err |= __get_user(regs->nip, &tm_sc->gp_regs[PT_NIP]); + err |= __get_user(current->thread.tm_tfhar, &sc->gp_regs[PT_NIP]); + + /* get MSR separately, transfer the LE bit if doing signal return */ + err |= __get_user(msr, &sc->gp_regs[PT_MSR]); + /* pull in MSR TM from user context */ + regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK); + + /* pull in MSR LE from user context */ + regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); + + /* The following non-GPR non-FPR non-VR state is also checkpointed: */ + err |= __get_user(regs->ctr, &tm_sc->gp_regs[PT_CTR]); + err |= __get_user(regs->link, &tm_sc->gp_regs[PT_LNK]); + err |= __get_user(regs->xer, &tm_sc->gp_regs[PT_XER]); + err |= __get_user(regs->ccr, &tm_sc->gp_regs[PT_CCR]); + err |= __get_user(current->thread.ckpt_regs.ctr, + &sc->gp_regs[PT_CTR]); + err |= __get_user(current->thread.ckpt_regs.link, + &sc->gp_regs[PT_LNK]); + err |= __get_user(current->thread.ckpt_regs.xer, + &sc->gp_regs[PT_XER]); + err |= __get_user(current->thread.ckpt_regs.ccr, + &sc->gp_regs[PT_CCR]); + + /* These regs are not checkpointed; they can go in 'regs'. */ + err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); + err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]); + err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]); + err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]); + + /* + * Do this before updating the thread state in + * current->thread.fpr/vr. That way, if we get preempted + * and another task grabs the FPU/Altivec, it won't be + * tempted to save the current CPU state into the thread_struct + * and corrupt what we are writing there. + */ + discard_lazy_cpu_state(); + + /* + * Force reload of FP/VEC. + * This has to be done before copying stuff into current->thread.fpr/vr + * for the reasons explained in the previous comment. + */ + regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX); + +#ifdef CONFIG_ALTIVEC + err |= __get_user(v_regs, &sc->v_regs); + err |= __get_user(tm_v_regs, &tm_sc->v_regs); + if (err) + return err; + if (v_regs && !access_ok(VERIFY_READ, v_regs, 34 * sizeof(vector128))) + return -EFAULT; + if (tm_v_regs && !access_ok(VERIFY_READ, + tm_v_regs, 34 * sizeof(vector128))) + return -EFAULT; + /* Copy 33 vec registers (vr0..31 and vscr) from the stack */ + if (v_regs != NULL && tm_v_regs != NULL && (msr & MSR_VEC) != 0) { + err |= __copy_from_user(¤t->thread.vr_state, v_regs, + 33 * sizeof(vector128)); + err |= __copy_from_user(¤t->thread.transact_vr, tm_v_regs, + 33 * sizeof(vector128)); + } + else if (current->thread.used_vr) { + memset(¤t->thread.vr_state, 0, 33 * sizeof(vector128)); + memset(¤t->thread.transact_vr, 0, 33 * sizeof(vector128)); + } + /* Always get VRSAVE back */ + if (v_regs != NULL && tm_v_regs != NULL) { + err |= __get_user(current->thread.vrsave, + (u32 __user *)&v_regs[33]); + err |= __get_user(current->thread.transact_vrsave, + (u32 __user *)&tm_v_regs[33]); + } + else { + current->thread.vrsave = 0; + current->thread.transact_vrsave = 0; + } + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + mtspr(SPRN_VRSAVE, current->thread.vrsave); +#endif /* CONFIG_ALTIVEC */ + /* restore floating point */ + err |= copy_fpr_from_user(current, &sc->fp_regs); + err |= copy_transact_fpr_from_user(current, &tm_sc->fp_regs); +#ifdef CONFIG_VSX + /* + * Get additional VSX data. Update v_regs to point after the + * VMX data. Copy VSX low doubleword from userspace to local + * buffer for formatting, then into the taskstruct. + */ + if (v_regs && ((msr & MSR_VSX) != 0)) { + v_regs += ELF_NVRREG; + tm_v_regs += ELF_NVRREG; + err |= copy_vsx_from_user(current, v_regs); + err |= copy_transact_vsx_from_user(current, tm_v_regs); + } else { + for (i = 0; i < 32 ; i++) { + current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0; + current->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET] = 0; + } + } +#endif + tm_enable(); + /* Make sure the transaction is marked as failed */ + current->thread.tm_texasr |= TEXASR_FS; + /* This loads the checkpointed FP/VEC state, if used */ + tm_recheckpoint(¤t->thread, msr); + + /* This loads the speculative FP/VEC state, if used */ + if (msr & MSR_FP) { + do_load_up_transact_fpu(¤t->thread); + regs->msr |= (MSR_FP | current->thread.fpexc_mode); + } +#ifdef CONFIG_ALTIVEC + if (msr & MSR_VEC) { + do_load_up_transact_altivec(¤t->thread); + regs->msr |= MSR_VEC; + } +#endif + return err; } +#endif /* * Setup the trampoline code on the stack @@ -334,7 +641,7 @@ int sys_swapcontext(struct ucontext __user *old_ctx, if (__copy_from_user(&set, &new_ctx->uc_sigmask, sizeof(set))) do_exit(SIGSEGV); - restore_sigmask(&set); + set_current_blocked(&set); if (restore_sigcontext(regs, NULL, 0, &new_ctx->uc_mcontext)) do_exit(SIGSEGV); @@ -354,6 +661,9 @@ int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5, { struct ucontext __user *uc = (struct ucontext __user *)regs->gpr[1]; sigset_t set; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + unsigned long msr; +#endif /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; @@ -363,27 +673,36 @@ int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5, if (__copy_from_user(&set, &uc->uc_sigmask, sizeof(set))) goto badframe; - restore_sigmask(&set); + set_current_blocked(&set); +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (__get_user(msr, &uc->uc_mcontext.gp_regs[PT_MSR])) + goto badframe; + if (MSR_TM_ACTIVE(msr)) { + /* We recheckpoint on return. */ + struct ucontext __user *uc_transact; + if (__get_user(uc_transact, &uc->uc_link)) + goto badframe; + if (restore_tm_sigcontexts(regs, &uc->uc_mcontext, + &uc_transact->uc_mcontext)) + goto badframe; + } + else + /* Fall through, for non-TM restore */ +#endif if (restore_sigcontext(regs, NULL, 1, &uc->uc_mcontext)) goto badframe; - /* do_sigaltstack expects a __user pointer and won't modify - * what's in there anyway - */ - do_sigaltstack(&uc->uc_stack, NULL, regs->gpr[1]); + if (restore_altstack(&uc->uc_stack)) + goto badframe; set_thread_flag(TIF_RESTOREALL); return 0; badframe: -#if DEBUG_SIG - printk("badframe in sys_rt_sigreturn, regs=%p uc=%p &uc->uc_mcontext=%p\n", - regs, uc, &uc->uc_mcontext); -#endif - if (show_unhandled_signals && printk_ratelimit()) - printk(regs->msr & MSR_SF ? fmt64 : fmt32, - current->comm, current->pid, "rt_sigreturn", - (long)uc, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, + current->comm, current->pid, "rt_sigreturn", + (long)uc, regs->nip, regs->link); force_sig(SIGSEGV, current); return 0; @@ -392,17 +711,11 @@ badframe: int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs *regs) { - /* Handler is *really* a pointer to the function descriptor for - * the signal routine. The first entry in the function - * descriptor is the entry address of signal and the second - * entry is the TOC value we need to use. - */ - func_descr_t __user *funct_desc_ptr; struct rt_sigframe __user *frame; unsigned long newsp = 0; long err = 0; - frame = get_sigframe(ka, regs, sizeof(*frame), 0); + frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 0); if (unlikely(frame == NULL)) goto badframe; @@ -414,19 +727,32 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->gpr[1]), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL, - (unsigned long)ka->sa.sa_handler, 1); + err |= __save_altstack(&frame->uc.uc_stack, regs->gpr[1]); +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + /* The ucontext_t passed to userland points to the second + * ucontext_t (for transactional state) with its uc_link ptr. + */ + err |= __put_user(&frame->uc_transact, &frame->uc.uc_link); + err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext, + &frame->uc_transact.uc_mcontext, + regs, signr, + NULL, + (unsigned long)ka->sa.sa_handler); + } else +#endif + { + err |= __put_user(0, &frame->uc.uc_link); + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, + NULL, (unsigned long)ka->sa.sa_handler, + 1); + } err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) goto badframe; /* Make sure signal handler doesn't get spurious FP exceptions */ - current->thread.fpscr.val = 0; + current->thread.fp_state.fpscr = 0; /* Set up to return from userspace. */ if (vdso64_rt_sigtramp && current->mm->context.vdso_base) { @@ -437,18 +763,32 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, goto badframe; regs->link = (unsigned long) &frame->tramp[0]; } - funct_desc_ptr = (func_descr_t __user *) ka->sa.sa_handler; /* Allocate a dummy caller frame for the signal handler. */ newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE; err |= put_user(regs->gpr[1], (unsigned long __user *)newsp); /* Set up "regs" so we "return" to the signal handler. */ - err |= get_user(regs->nip, &funct_desc_ptr->entry); - /* enter the signal handler in big-endian mode */ + if (is_elf2_task()) { + regs->nip = (unsigned long) ka->sa.sa_handler; + regs->gpr[12] = regs->nip; + } else { + /* Handler is *really* a pointer to the function descriptor for + * the signal routine. The first entry in the function + * descriptor is the entry address of signal and the second + * entry is the TOC value we need to use. + */ + func_descr_t __user *funct_desc_ptr = + (func_descr_t __user *) ka->sa.sa_handler; + + err |= get_user(regs->nip, &funct_desc_ptr->entry); + err |= get_user(regs->gpr[2], &funct_desc_ptr->toc); + } + + /* enter the signal handler in native-endian mode */ regs->msr &= ~MSR_LE; + regs->msr |= (MSR_KERNEL & MSR_LE); regs->gpr[1] = newsp; - err |= get_user(regs->gpr[2], &funct_desc_ptr->toc); regs->gpr[3] = signr; regs->result = 0; if (ka->sa.sa_flags & SA_SIGINFO) { @@ -464,14 +804,10 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, return 1; badframe: -#if DEBUG_SIG - printk("badframe in setup_rt_frame, regs=%p frame=%p newsp=%lx\n", - regs, frame, newsp); -#endif - if (show_unhandled_signals && printk_ratelimit()) - printk(regs->msr & MSR_SF ? fmt64 : fmt32, - current->comm, current->pid, "setup_rt_frame", - (long)frame, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, + current->comm, current->pid, "setup_rt_frame", + (long)frame, regs->nip, regs->link); force_sigsegv(signr, current); return 0; |