diff options
Diffstat (limited to 'arch/powerpc/kernel/head_fsl_booke.S')
| -rw-r--r-- | arch/powerpc/kernel/head_fsl_booke.S | 425 |
1 files changed, 340 insertions, 85 deletions
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index d5d78c4ceef..b497188a94a 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -65,29 +65,78 @@ _ENTRY(_start); nop /* Translate device tree address to physical, save in r30/r31 */ - mfmsr r16 - mfspr r17,SPRN_PID - rlwinm r17,r17,16,0x3fff0000 /* turn PID into MAS6[SPID] */ - rlwimi r17,r16,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */ - mtspr SPRN_MAS6,r17 - - tlbsx 0,r3 /* must succeed */ - - mfspr r16,SPRN_MAS1 - mfspr r20,SPRN_MAS3 - rlwinm r17,r16,25,0x1f /* r17 = log2(page size) */ - li r18,1024 - slw r18,r18,r17 /* r18 = page size */ - addi r18,r18,-1 - and r19,r3,r18 /* r19 = page offset */ - andc r31,r20,r18 /* r31 = page base */ - or r31,r31,r19 /* r31 = devtree phys addr */ - mfspr r30,SPRN_MAS7 + bl get_phys_addr + mr r30,r3 + mr r31,r4 li r25,0 /* phys kernel start (low) */ li r24,0 /* CPU number */ li r23,0 /* phys kernel start (high) */ +#ifdef CONFIG_RELOCATABLE + LOAD_REG_ADDR_PIC(r3, _stext) /* Get our current runtime base */ + + /* Translate _stext address to physical, save in r23/r25 */ + bl get_phys_addr + mr r23,r3 + mr r25,r4 + + bl 0f +0: mflr r8 + addis r3,r8,(is_second_reloc - 0b)@ha + lwz r19,(is_second_reloc - 0b)@l(r3) + + /* Check if this is the second relocation. */ + cmpwi r19,1 + bne 1f + + /* + * For the second relocation, we already get the real memstart_addr + * from device tree. So we will map PAGE_OFFSET to memstart_addr, + * then the virtual address of start kernel should be: + * PAGE_OFFSET + (kernstart_addr - memstart_addr) + * Since the offset between kernstart_addr and memstart_addr should + * never be beyond 1G, so we can just use the lower 32bit of them + * for the calculation. + */ + lis r3,PAGE_OFFSET@h + + addis r4,r8,(kernstart_addr - 0b)@ha + addi r4,r4,(kernstart_addr - 0b)@l + lwz r5,4(r4) + + addis r6,r8,(memstart_addr - 0b)@ha + addi r6,r6,(memstart_addr - 0b)@l + lwz r7,4(r6) + + subf r5,r7,r5 + add r3,r3,r5 + b 2f + +1: + /* + * We have the runtime (virutal) address of our base. + * We calculate our shift of offset from a 64M page. + * We could map the 64M page we belong to at PAGE_OFFSET and + * get going from there. + */ + lis r4,KERNELBASE@h + ori r4,r4,KERNELBASE@l + rlwinm r6,r25,0,0x3ffffff /* r6 = PHYS_START % 64M */ + rlwinm r5,r4,0,0x3ffffff /* r5 = KERNELBASE % 64M */ + subf r3,r5,r6 /* r3 = r6 - r5 */ + add r3,r4,r3 /* Required Virtual Address */ + +2: bl relocate + + /* + * For the second relocation, we already set the right tlb entries + * for the kernel space, so skip the code in fsl_booke_entry_mapping.S + */ + cmpwi r19,1 + beq set_ivor +#endif + /* We try to not make any assumptions about how the boot loader * setup or used the TLBs. We invalidate all mappings from the * boot loader and load a single entry in TLB1[0] to map the @@ -113,6 +162,7 @@ _ENTRY(__early_start) #include "fsl_booke_entry_mapping.S" #undef ENTRY_MAPPING_BOOT_SETUP +set_ivor: /* Establish the interrupt vector offsets */ SET_IVOR(0, CriticalInput); SET_IVOR(1, MachineCheck); @@ -166,8 +216,7 @@ _ENTRY(__early_start) /* Check to see if we're the second processor, and jump * to the secondary_start code if so */ - lis r24, boot_cpuid@h - ori r24, r24, boot_cpuid@l + LOAD_REG_ADDR_PIC(r24, boot_cpuid) lwz r24, 0(r24) cmpwi r24, -1 mfspr r24,SPRN_PIR @@ -192,11 +241,23 @@ _ENTRY(__early_start) li r0,0 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) - rlwinm r22,r1,0,0,31-THREAD_SHIFT /* current thread_info */ + CURRENT_THREAD_INFO(r22, r1) stw r24, TI_CPU(r22) bl early_init +#ifdef CONFIG_RELOCATABLE + mr r3,r30 + mr r4,r31 +#ifdef CONFIG_PHYS_64BIT + mr r5,r23 + mr r6,r25 +#else + mr r5,r25 +#endif + bl relocate_init +#endif + #ifdef CONFIG_DYNAMIC_MEMSTART lis r3,kernstart_addr@ha la r3,kernstart_addr@l(r3) @@ -301,25 +362,26 @@ _ENTRY(__early_start) interrupt_base: /* Critical Input Interrupt */ - CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception) + CRITICAL_EXCEPTION(0x0100, CRITICAL, CriticalInput, unknown_exception) /* Machine Check Interrupt */ #ifdef CONFIG_E200 /* no RFMCI, MCSRRs on E200 */ - CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) + CRITICAL_EXCEPTION(0x0200, MACHINE_CHECK, MachineCheck, \ + machine_check_exception) #else MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception) #endif /* Data Storage Interrupt */ START_EXCEPTION(DataStorage) - NORMAL_EXCEPTION_PROLOG + NORMAL_EXCEPTION_PROLOG(DATA_STORAGE) mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */ stw r5,_ESR(r11) mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */ andis. r10,r5,(ESR_ILK|ESR_DLK)@h bne 1f - EXC_XFER_EE_LITE(0x0300, handle_page_fault) + EXC_XFER_LITE(0x0300, handle_page_fault) 1: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0x0300, CacheLockingException) @@ -328,7 +390,7 @@ interrupt_base: INSTRUCTION_STORAGE_EXCEPTION /* External Input Interrupt */ - EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE) + EXCEPTION(0x0500, EXTERNAL, ExternalInput, do_IRQ, EXC_XFER_LITE) /* Alignment Interrupt */ ALIGNMENT_EXCEPTION @@ -342,32 +404,36 @@ interrupt_base: #else #ifdef CONFIG_E200 /* E200 treats 'normal' floating point instructions as FP Unavail exception */ - EXCEPTION(0x0800, FloatingPointUnavailable, program_check_exception, EXC_XFER_EE) + EXCEPTION(0x0800, FP_UNAVAIL, FloatingPointUnavailable, \ + program_check_exception, EXC_XFER_EE) #else - EXCEPTION(0x0800, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x0800, FP_UNAVAIL, FloatingPointUnavailable, \ + unknown_exception, EXC_XFER_EE) #endif #endif /* System Call Interrupt */ START_EXCEPTION(SystemCall) - NORMAL_EXCEPTION_PROLOG + NORMAL_EXCEPTION_PROLOG(SYSCALL) EXC_XFER_EE_LITE(0x0c00, DoSyscall) /* Auxiliary Processor Unavailable Interrupt */ - EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x2900, AP_UNAVAIL, AuxillaryProcessorUnavailable, \ + unknown_exception, EXC_XFER_EE) /* Decrementer Interrupt */ DECREMENTER_EXCEPTION /* Fixed Internal Timer Interrupt */ /* TODO: Add FIT support */ - EXCEPTION(0x3100, FixedIntervalTimer, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x3100, FIT, FixedIntervalTimer, \ + unknown_exception, EXC_XFER_EE) /* Watchdog Timer Interrupt */ #ifdef CONFIG_BOOKE_WDT - CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException) + CRITICAL_EXCEPTION(0x3200, WATCHDOG, WatchdogTimer, WatchdogException) #else - CRITICAL_EXCEPTION(0x3200, WatchdogTimer, unknown_exception) + CRITICAL_EXCEPTION(0x3200, WATCHDOG, WatchdogTimer, unknown_exception) #endif /* Data TLB Error Interrupt */ @@ -375,10 +441,16 @@ interrupt_base: mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ mfspr r10, SPRN_SPRG_THREAD stw r11, THREAD_NORMSAVE(0)(r10) +#ifdef CONFIG_KVM_BOOKE_HV +BEGIN_FTR_SECTION + mfspr r11, SPRN_SRR1 +END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) +#endif stw r12, THREAD_NORMSAVE(1)(r10) stw r13, THREAD_NORMSAVE(2)(r10) mfcr r13 stw r13, THREAD_NORMSAVE(3)(r10) + DO_KVM BOOKE_INTERRUPT_DTLB_MISS SPRN_SRR1 mfspr r10, SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -463,10 +535,16 @@ interrupt_base: mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ mfspr r10, SPRN_SPRG_THREAD stw r11, THREAD_NORMSAVE(0)(r10) +#ifdef CONFIG_KVM_BOOKE_HV +BEGIN_FTR_SECTION + mfspr r11, SPRN_SRR1 +END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) +#endif stw r12, THREAD_NORMSAVE(1)(r10) stw r13, THREAD_NORMSAVE(2)(r10) mfcr r13 stw r13, THREAD_NORMSAVE(3)(r10) + DO_KVM BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR1 mfspr r10, SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -538,36 +616,58 @@ interrupt_base: #ifdef CONFIG_SPE /* SPE Unavailable */ START_EXCEPTION(SPEUnavailable) - NORMAL_EXCEPTION_PROLOG - bne load_up_spe - addi r3,r1,STACK_FRAME_OVERHEAD + NORMAL_EXCEPTION_PROLOG(SPE_ALTIVEC_UNAVAIL) + beq 1f + bl load_up_spe + b fast_exception_return +1: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0x2010, KernelSPE) #else - EXCEPTION(0x2020, SPEUnavailable, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x2020, SPE_ALTIVEC_UNAVAIL, SPEUnavailable, \ + unknown_exception, EXC_XFER_EE) #endif /* CONFIG_SPE */ /* SPE Floating Point Data */ #ifdef CONFIG_SPE - EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE); + EXCEPTION(0x2030, SPE_FP_DATA_ALTIVEC_ASSIST, SPEFloatingPointData, + SPEFloatingPointException, EXC_XFER_EE) /* SPE Floating Point Round */ - EXCEPTION(0x2050, SPEFloatingPointRound, SPEFloatingPointRoundException, EXC_XFER_EE) + EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \ + SPEFloatingPointRoundException, EXC_XFER_EE) #else - EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x2040, SPE_FP_DATA_ALTIVEC_ASSIST, SPEFloatingPointData, + unknown_exception, EXC_XFER_EE) + EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \ + unknown_exception, EXC_XFER_EE) #endif /* CONFIG_SPE */ /* Performance Monitor */ - EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD) + EXCEPTION(0x2060, PERFORMANCE_MONITOR, PerformanceMonitor, \ + performance_monitor_exception, EXC_XFER_STD) - EXCEPTION(0x2070, Doorbell, doorbell_exception, EXC_XFER_STD) + EXCEPTION(0x2070, DOORBELL, Doorbell, doorbell_exception, EXC_XFER_STD) - CRITICAL_EXCEPTION(0x2080, CriticalDoorbell, unknown_exception) + CRITICAL_EXCEPTION(0x2080, DOORBELL_CRITICAL, \ + CriticalDoorbell, unknown_exception) /* Debug Interrupt */ DEBUG_DEBUG_EXCEPTION DEBUG_CRIT_EXCEPTION + GUEST_DOORBELL_EXCEPTION + + CRITICAL_EXCEPTION(0, GUEST_DBELL_CRIT, CriticalGuestDoorbell, \ + unknown_exception) + + /* Hypercall */ + EXCEPTION(0, HV_SYSCALL, Hypercall, unknown_exception, EXC_XFER_EE) + + /* Embedded Hypervisor Privilege */ + EXCEPTION(0, HV_PRIV, Ehvpriv, unknown_exception, EXC_XFER_EE) + +interrupt_end: + /* * Local functions */ @@ -743,7 +843,7 @@ tlb_write_entry: /* Note that the SPE support is closely modeled after the AltiVec * support. Changes to one are likely to be applicable to the * other! */ -load_up_spe: +_GLOBAL(load_up_spe) /* * Disable SPE for the task which had SPE previously, * and save its SPE registers in its thread_struct. @@ -791,20 +891,7 @@ load_up_spe: subi r4,r5,THREAD stw r4,last_task_used_spe@l(r3) #endif /* !CONFIG_SMP */ - /* restore registers and return */ -2: REST_4GPRS(3, r11) - lwz r10,_CCR(r11) - REST_GPR(1, r11) - mtcr r10 - lwz r10,_LINK(r11) - mtlr r10 - REST_GPR(10, r11) - mtspr SPRN_SRR1,r9 - mtspr SPRN_SRR0,r12 - REST_GPR(9, r11) - REST_GPR(12, r11) - lwz r11,GPR11(r11) - rfi + blr /* * SPE unavailable trap from kernel - print a message, but let @@ -830,6 +917,33 @@ KernelSPE: #endif /* CONFIG_SPE */ /* + * Translate the effec addr in r3 to phys addr. The phys addr will be put + * into r3(higher 32bit) and r4(lower 32bit) + */ +get_phys_addr: + mfmsr r8 + mfspr r9,SPRN_PID + rlwinm r9,r9,16,0x3fff0000 /* turn PID into MAS6[SPID] */ + rlwimi r9,r8,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */ + mtspr SPRN_MAS6,r9 + + tlbsx 0,r3 /* must succeed */ + + mfspr r8,SPRN_MAS1 + mfspr r12,SPRN_MAS3 + rlwinm r9,r8,25,0x1f /* r9 = log2(page size) */ + li r10,1024 + slw r10,r10,r9 /* r10 = page size */ + addi r10,r10,-1 + and r11,r3,r10 /* r11 = page offset */ + andc r4,r12,r10 /* r4 = page base */ + or r4,r4,r11 /* r4 = devtree phys addr */ +#ifdef CONFIG_PHYS_64BIT + mfspr r3,SPRN_MAS7 +#endif + blr + +/* * Global functions */ @@ -874,12 +988,17 @@ _GLOBAL(__setup_e500mc_ivors) sync blr -/* - * extern void giveup_altivec(struct task_struct *prev) - * - * The e500 core does not have an AltiVec unit. - */ -_GLOBAL(giveup_altivec) +/* setup ehv ivors for */ +_GLOBAL(__setup_ehv_ivors) + li r3,GuestDoorbell@l + mtspr SPRN_IVOR38,r3 + li r3,CriticalGuestDoorbell@l + mtspr SPRN_IVOR39,r3 + li r3,Hypercall@l + mtspr SPRN_IVOR40,r3 + li r3,Ehvpriv@l + mtspr SPRN_IVOR41,r3 + sync blr #ifdef CONFIG_SPE @@ -917,16 +1036,6 @@ _GLOBAL(giveup_spe) #endif /* CONFIG_SPE */ /* - * extern void giveup_fpu(struct task_struct *prev) - * - * Not all FSL Book-E cores have an FPU - */ -#ifndef CONFIG_PPC_FPU -_GLOBAL(giveup_fpu) - blr -#endif - -/* * extern void abort(void) * * At present, this routine just applies a system reset. @@ -1004,28 +1113,68 @@ _GLOBAL(flush_dcache_L1) blr +/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */ +_GLOBAL(__flush_disable_L1) + mflr r10 + bl flush_dcache_L1 /* Flush L1 d-cache */ + mtlr r10 + + mfspr r4, SPRN_L1CSR0 /* Invalidate and disable d-cache */ + li r5, 2 + rlwimi r4, r5, 0, 3 + + msync + isync + mtspr SPRN_L1CSR0, r4 + isync + +1: mfspr r4, SPRN_L1CSR0 /* Wait for the invalidate to finish */ + andi. r4, r4, 2 + bne 1b + + mfspr r4, SPRN_L1CSR1 /* Invalidate and disable i-cache */ + li r5, 2 + rlwimi r4, r5, 0, 3 + + mtspr SPRN_L1CSR1, r4 + isync + + blr + #ifdef CONFIG_SMP /* When we get here, r24 needs to hold the CPU # */ .globl __secondary_start __secondary_start: - lis r3,__secondary_hold_acknowledge@h - ori r3,r3,__secondary_hold_acknowledge@l - stw r24,0(r3) - - li r3,0 - mr r4,r24 /* Why? */ - bl call_setup_cpu - - lis r3,tlbcam_index@ha - lwz r3,tlbcam_index@l(r3) + LOAD_REG_ADDR_PIC(r3, tlbcam_index) + lwz r3,0(r3) mtctr r3 li r26,0 /* r26 safe? */ + bl switch_to_as1 + mr r27,r3 /* tlb entry */ /* Load each CAM entry */ 1: mr r3,r26 bl loadcam_entry addi r26,r26,1 bdnz 1b + mr r3,r27 /* tlb entry */ + LOAD_REG_ADDR_PIC(r4, memstart_addr) + lwz r4,0(r4) + mr r5,r25 /* phys kernel start */ + rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */ + subf r4,r5,r4 /* memstart_addr - phys kernel start */ + li r5,0 /* no device tree */ + li r6,0 /* not boot cpu */ + bl restore_to_as0 + + + lis r3,__secondary_hold_acknowledge@h + ori r3,r3,__secondary_hold_acknowledge@l + stw r24,0(r3) + + li r3,0 + mr r4,r24 /* Why? */ + bl call_setup_cpu /* get current_thread_info and current */ lis r1,secondary_ti@ha @@ -1062,6 +1211,112 @@ __secondary_hold_acknowledge: #endif /* + * Create a tlb entry with the same effective and physical address as + * the tlb entry used by the current running code. But set the TS to 1. + * Then switch to the address space 1. It will return with the r3 set to + * the ESEL of the new created tlb. + */ +_GLOBAL(switch_to_as1) + mflr r5 + + /* Find a entry not used */ + mfspr r3,SPRN_TLB1CFG + andi. r3,r3,0xfff + mfspr r4,SPRN_PID + rlwinm r4,r4,16,0x3fff0000 /* turn PID into MAS6[SPID] */ + mtspr SPRN_MAS6,r4 +1: lis r4,0x1000 /* Set MAS0(TLBSEL) = 1 */ + addi r3,r3,-1 + rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r4 + tlbre + mfspr r4,SPRN_MAS1 + andis. r4,r4,MAS1_VALID@h + bne 1b + + /* Get the tlb entry used by the current running code */ + bl 0f +0: mflr r4 + tlbsx 0,r4 + + mfspr r4,SPRN_MAS1 + ori r4,r4,MAS1_TS /* Set the TS = 1 */ + mtspr SPRN_MAS1,r4 + + mfspr r4,SPRN_MAS0 + rlwinm r4,r4,0,~MAS0_ESEL_MASK + rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r4 + tlbwe + isync + sync + + mfmsr r4 + ori r4,r4,MSR_IS | MSR_DS + mtspr SPRN_SRR0,r5 + mtspr SPRN_SRR1,r4 + sync + rfi + +/* + * Restore to the address space 0 and also invalidate the tlb entry created + * by switch_to_as1. + * r3 - the tlb entry which should be invalidated + * r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0) + * r5 - device tree virtual address. If r4 is 0, r5 is ignored. + * r6 - boot cpu +*/ +_GLOBAL(restore_to_as0) + mflr r0 + + bl 0f +0: mflr r9 + addi r9,r9,1f - 0b + + /* + * We may map the PAGE_OFFSET in AS0 to a different physical address, + * so we need calculate the right jump and device tree address based + * on the offset passed by r4. + */ + add r9,r9,r4 + add r5,r5,r4 + add r0,r0,r4 + +2: mfmsr r7 + li r8,(MSR_IS | MSR_DS) + andc r7,r7,r8 + + mtspr SPRN_SRR0,r9 + mtspr SPRN_SRR1,r7 + sync + rfi + + /* Invalidate the temporary tlb entry for AS1 */ +1: lis r9,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r9,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r9 + tlbre + mfspr r9,SPRN_MAS1 + rlwinm r9,r9,0,2,31 /* Clear MAS1 Valid and IPPROT */ + mtspr SPRN_MAS1,r9 + tlbwe + isync + + cmpwi r4,0 + cmpwi cr1,r6,0 + cror eq,4*cr1+eq,eq + bne 3f /* offset != 0 && is_boot_cpu */ + mtlr r0 + blr + + /* + * The PAGE_OFFSET will map to a different physical address, + * jump to _start to do another relocation again. + */ +3: mr r3,r5 + bl _start + +/* * We put a few things here that have to be page-aligned. This stuff * goes at the beginning of the data segment, which is page-aligned. */ |