aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/head_32.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/head_32.S')
-rw-r--r--arch/powerpc/kernel/head_32.S317
1 files changed, 136 insertions, 181 deletions
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index d794a637e42..dc0488b6f6e 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -21,6 +21,7 @@
*
*/
+#include <linux/init.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -32,6 +33,7 @@
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
#include <asm/bug.h>
+#include <asm/kvm_book3s_asm.h>
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
@@ -50,7 +52,7 @@
mtspr SPRN_DBAT##n##L,RB; \
1:
- .section .text.head, "ax"
+ __HEAD
.stabs "arch/powerpc/kernel/",N_SO,0,0,0f
.stabs "head_32.S",N_SO,0,0,0f
0:
@@ -108,18 +110,21 @@ __start:
* because OF may have I/O devices mapped into that area
* (particularly on CHRP).
*/
-#ifdef CONFIG_PPC_MULTIPLATFORM
cmpwi 0,r5,0
beq 1f
+#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
/* find out where we are now */
bcl 20,31,$+4
0: mflr r8 /* r8 = runtime addr here */
addis r8,r8,(_stext - 0b)@ha
addi r8,r8,(_stext - 0b)@l /* current runtime base addr */
bl prom_init
+#endif /* CONFIG_PPC_OF_BOOT_TRAMPOLINE */
+
+ /* We never return. We also hit that trap if trying to boot
+ * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
trap
-#endif
/*
* Check for BootX signature when supporting PowerMac and branch to
@@ -134,8 +139,7 @@ __start:
trap
#endif /* CONFIG_PPC_PMAC */
-1: mr r31,r3 /* save parameters */
- mr r30,r4
+1: mr r31,r3 /* save device tree ptr */
li r24,0 /* cpu # */
/*
@@ -160,6 +164,9 @@ __after_mmu_off:
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
bl setup_cpm_bat
#endif
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+ bl setup_usbgecko_bat
+#endif
/*
* Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -240,8 +247,8 @@ __secondary_hold_acknowledge:
* task's thread_struct.
*/
#define EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; \
- mtspr SPRN_SPRG1,r11; \
+ mtspr SPRN_SPRG_SCRATCH0,r10; \
+ mtspr SPRN_SPRG_SCRATCH1,r11; \
mfcr r10; \
EXCEPTION_PROLOG_1; \
EXCEPTION_PROLOG_2
@@ -251,7 +258,7 @@ __secondary_hold_acknowledge:
andi. r11,r11,MSR_PR; \
tophys(r11,r1); /* use tophys(r1) if kernel */ \
beq 1f; \
- mfspr r11,SPRN_SPRG3; \
+ mfspr r11,SPRN_SPRG_THREAD; \
lwz r11,THREAD_INFO-THREAD(r11); \
addi r11,r11,THREAD_SIZE; \
tophys(r11,r11); \
@@ -263,9 +270,9 @@ __secondary_hold_acknowledge:
stw r10,_CCR(r11); /* save registers */ \
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
+ mfspr r10,SPRN_SPRG_SCRATCH0; \
stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
+ mfspr r12,SPRN_SPRG_SCRATCH1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
@@ -296,6 +303,7 @@ __secondary_hold_acknowledge:
*/
#define EXCEPTION(n, label, hdlr, xfer) \
. = n; \
+ DO_KVM n; \
label: \
EXCEPTION_PROLOG; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
@@ -351,11 +359,12 @@ i##n: \
* -- paulus.
*/
. = 0x200
- mtspr SPRN_SPRG0,r10
- mtspr SPRN_SPRG1,r11
+ DO_KVM 0x200
+ mtspr SPRN_SPRG_SCRATCH0,r10
+ mtspr SPRN_SPRG_SCRATCH1,r11
mfcr r10
#ifdef CONFIG_PPC_CHRP
- mfspr r11,SPRN_SPRG2
+ mfspr r11,SPRN_SPRG_RTAS
cmpwi 0,r11,0
bne 7f
#endif /* CONFIG_PPC_CHRP */
@@ -363,7 +372,7 @@ i##n: \
7: EXCEPTION_PROLOG_2
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_CHRP
- mfspr r4,SPRN_SPRG2
+ mfspr r4,SPRN_SPRG_RTAS
cmpwi cr1,r4,0
bne cr1,1f
#endif
@@ -374,6 +383,7 @@ i##n: \
/* Data access exception. */
. = 0x300
+ DO_KVM 0x300
DataAccess:
EXCEPTION_PROLOG
mfspr r10,SPRN_DSISR
@@ -385,11 +395,12 @@ DataAccess:
bl hash_page
1: lwz r5,_DSISR(r11) /* get DSISR value */
mfspr r4,SPRN_DAR
- EXC_XFER_EE_LITE(0x300, handle_page_fault)
+ EXC_XFER_LITE(0x300, handle_page_fault)
/* Instruction access exception. */
. = 0x400
+ DO_KVM 0x400
InstructionAccess:
EXCEPTION_PROLOG
andis. r0,r9,0x4000 /* no pte found? */
@@ -399,13 +410,14 @@ InstructionAccess:
bl hash_page
1: mr r4,r12
mr r5,r9
- EXC_XFER_EE_LITE(0x400, handle_page_fault)
+ EXC_XFER_LITE(0x400, handle_page_fault)
/* External interrupt */
EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
/* Alignment exception */
. = 0x600
+ DO_KVM 0x600
Alignment:
EXCEPTION_PROLOG
mfspr r4,SPRN_DAR
@@ -420,6 +432,7 @@ Alignment:
/* Floating-point unavailable */
. = 0x800
+ DO_KVM 0x800
FPUnavailable:
BEGIN_FTR_SECTION
/*
@@ -443,6 +456,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
/* System call */
. = 0xc00
+ DO_KVM 0xc00
SystemCall:
EXCEPTION_PROLOG
EXC_XFER_EE_LITE(0xc00, DoSyscall)
@@ -460,9 +474,11 @@ SystemCall:
* by executing an altivec instruction.
*/
. = 0xf00
+ DO_KVM 0xf00
b PerformanceMonitor
. = 0xf20
+ DO_KVM 0xf20
b AltiVecUnavailable
/*
@@ -472,17 +488,16 @@ SystemCall:
. = 0x1000
InstructionTLBMiss:
/*
- * r0: stored ctr
+ * r0: scratch
* r1: linux style pte ( later becomes ppc hardware pte )
* r2: ptr to linux-style pte
* r3: scratch
*/
- mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_IMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG3
+ mfspr r2,SPRN_SPRG_THREAD
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
bge- 112f
@@ -496,28 +511,27 @@ InstructionTLBMiss:
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
beq- InstructionAddressInvalid /* return if no mapping */
rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
- lwz r3,0(r2) /* get linux-style pte */
- andc. r1,r1,r3 /* check access & ~permission */
+ lwz r0,0(r2) /* get linux-style pte */
+ andc. r1,r1,r0 /* check access & ~permission */
bne- InstructionAddressInvalid /* return if access not permitted */
- ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
+ ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
/*
* NOTE! We are assuming this is not an SMP system, otherwise
* we would need to update the pte atomically with lwarx/stwcx.
*/
- stw r3,0(r2) /* update PTE (accessed bit) */
+ stw r0,0(r2) /* update PTE (accessed bit) */
/* Convert linux-style PTE to low word of PPC-style PTE */
- rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */
- rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
+ rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
+ rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
and r1,r1,r2 /* writable if _RW and _DIRTY */
- rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
- rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
+ rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
ori r1,r1,0xe04 /* clear out reserved bits */
- andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+ andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
BEGIN_FTR_SECTION
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtspr SPRN_RPA,r1
- mfspr r3,SPRN_IMISS
tlbli r3
mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
mtcrf 0x80,r3
@@ -528,7 +542,6 @@ InstructionAddressInvalid:
addis r1,r1,0x2000
mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */
- mtctr r0 /* Restore CTR */
andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
or r2,r2,r1
mtspr SPRN_SRR1,r2
@@ -549,17 +562,16 @@ InstructionAddressInvalid:
. = 0x1100
DataLoadTLBMiss:
/*
- * r0: stored ctr
+ * r0: scratch
* r1: linux style pte ( later becomes ppc hardware pte )
* r2: ptr to linux-style pte
* r3: scratch
*/
- mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG3
+ mfspr r2,SPRN_SPRG_THREAD
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
bge- 112f
@@ -573,38 +585,48 @@ DataLoadTLBMiss:
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
beq- DataAddressInvalid /* return if no mapping */
rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
- lwz r3,0(r2) /* get linux-style pte */
- andc. r1,r1,r3 /* check access & ~permission */
+ lwz r0,0(r2) /* get linux-style pte */
+ andc. r1,r1,r0 /* check access & ~permission */
bne- DataAddressInvalid /* return if access not permitted */
- ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
+ ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
/*
* NOTE! We are assuming this is not an SMP system, otherwise
* we would need to update the pte atomically with lwarx/stwcx.
*/
- stw r3,0(r2) /* update PTE (accessed bit) */
+ stw r0,0(r2) /* update PTE (accessed bit) */
/* Convert linux-style PTE to low word of PPC-style PTE */
- rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */
- rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
+ rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
+ rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
and r1,r1,r2 /* writable if _RW and _DIRTY */
- rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
- rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
+ rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
ori r1,r1,0xe04 /* clear out reserved bits */
- andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+ andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
BEGIN_FTR_SECTION
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtspr SPRN_RPA,r1
- mfspr r3,SPRN_DMISS
+ mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r2
+BEGIN_MMU_FTR_SECTION
+ li r0,1
+ mfspr r1,SPRN_SPRG_603_LRU
+ rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
+ slw r0,r0,r2
+ xor r1,r0,r1
+ srw r0,r1,r2
+ mtspr SPRN_SPRG_603_LRU,r1
+ mfspr r2,SPRN_SRR1
+ rlwimi r2,r0,31-14,14,14
+ mtspr SPRN_SRR1,r2
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
tlbld r3
- mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
- mtcrf 0x80,r3
rfi
DataAddressInvalid:
mfspr r3,SPRN_SRR1
rlwinm r1,r3,9,6,6 /* Get load/store bit */
addis r1,r1,0x2000
mtspr SPRN_DSISR,r1
- mtctr r0 /* Restore CTR */
andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
mtspr SPRN_SRR1,r2
mfspr r1,SPRN_DMISS /* Get failing address */
@@ -624,17 +646,16 @@ DataAddressInvalid:
. = 0x1200
DataStoreTLBMiss:
/*
- * r0: stored ctr
+ * r0: scratch
* r1: linux style pte ( later becomes ppc hardware pte )
* r2: ptr to linux-style pte
* r3: scratch
*/
- mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG3
+ mfspr r2,SPRN_SPRG_THREAD
li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
lwz r2,PGDIR(r2)
bge- 112f
@@ -648,27 +669,38 @@ DataStoreTLBMiss:
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
beq- DataAddressInvalid /* return if no mapping */
rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
- lwz r3,0(r2) /* get linux-style pte */
- andc. r1,r1,r3 /* check access & ~permission */
+ lwz r0,0(r2) /* get linux-style pte */
+ andc. r1,r1,r0 /* check access & ~permission */
bne- DataAddressInvalid /* return if access not permitted */
- ori r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY
+ ori r0,r0,_PAGE_ACCESSED|_PAGE_DIRTY
/*
* NOTE! We are assuming this is not an SMP system, otherwise
* we would need to update the pte atomically with lwarx/stwcx.
*/
- stw r3,0(r2) /* update PTE (accessed/dirty bits) */
+ stw r0,0(r2) /* update PTE (accessed/dirty bits) */
/* Convert linux-style PTE to low word of PPC-style PTE */
- rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
li r1,0xe05 /* clear out reserved bits & PP lsb */
- andc r1,r3,r1 /* PP = user? 2: 0 */
+ andc r1,r0,r1 /* PP = user? 2: 0 */
BEGIN_FTR_SECTION
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtspr SPRN_RPA,r1
- mfspr r3,SPRN_DMISS
+ mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r2
+BEGIN_MMU_FTR_SECTION
+ li r0,1
+ mfspr r1,SPRN_SPRG_603_LRU
+ rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
+ slw r0,r0,r2
+ xor r1,r0,r1
+ srw r0,r1,r2
+ mtspr SPRN_SPRG_603_LRU,r1
+ mfspr r2,SPRN_SRR1
+ rlwimi r2,r0,31-14,14,14
+ mtspr SPRN_SRR1,r2
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
tlbld r3
- mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
- mtcrf 0x80,r3
rfi
#ifndef CONFIG_ALTIVEC
@@ -713,9 +745,11 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
AltiVecUnavailable:
EXCEPTION_PROLOG
#ifdef CONFIG_ALTIVEC
- bne load_up_altivec /* if from user, just load it up */
+ beq 1f
+ bl load_up_altivec /* if from user, just load it up */
+ b fast_exception_return
#endif /* CONFIG_ALTIVEC */
- addi r3,r1,STACK_FRAME_OVERHEAD
+1: addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
PerformanceMonitor:
@@ -723,101 +757,6 @@ PerformanceMonitor:
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_STD(0xf00, performance_monitor_exception)
-#ifdef CONFIG_ALTIVEC
-/* Note that the AltiVec support is closely modeled after the FP
- * support. Changes to one are likely to be applicable to the
- * other! */
-load_up_altivec:
-/*
- * Disable AltiVec for the task which had AltiVec previously,
- * and save its AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- * On SMP we know the AltiVec units are free, since we give it up every
- * switch. -- Kumar
- */
- mfmsr r5
- oris r5,r5,MSR_VEC@h
- MTMSRD(r5) /* enable use of AltiVec now */
- isync
-/*
- * For SMP, we don't do lazy AltiVec switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_altivec in switch_to.
- */
-#ifndef CONFIG_SMP
- tophys(r6,0)
- addis r3,r6,last_task_used_altivec@ha
- lwz r4,last_task_used_altivec@l(r3)
- cmpwi 0,r4,0
- beq 1f
- add r4,r4,r6
- addi r4,r4,THREAD /* want THREAD of last_task_used_altivec */
- SAVE_32VRS(0,r10,r4)
- mfvscr vr0
- li r10,THREAD_VSCR
- stvx vr0,r10,r4
- lwz r5,PT_REGS(r4)
- add r5,r5,r6
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r10,MSR_VEC@h
- andc r4,r4,r10 /* disable altivec for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* enable use of AltiVec after return */
- oris r9,r9,MSR_VEC@h
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
- li r4,1
- li r10,THREAD_VSCR
- stw r4,THREAD_USED_VR(r5)
- lvx vr0,r10,r5
- mtvscr vr0
- REST_32VRS(0,r10,r5)
-#ifndef CONFIG_SMP
- subi r4,r5,THREAD
- sub r4,r4,r6
- stw r4,last_task_used_altivec@l(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
- /* we haven't used ctr or xer or lr */
- b fast_exception_return
-
-/*
- * giveup_altivec(tsk)
- * Disable AltiVec for the task given as the argument,
- * and save the AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- */
-
- .globl giveup_altivec
-giveup_altivec:
- mfmsr r5
- oris r5,r5,MSR_VEC@h
- SYNC
- MTMSRD(r5) /* enable use of AltiVec now */
- isync
- cmpwi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- lwz r5,PT_REGS(r3)
- cmpwi 0,r5,0
- SAVE_32VRS(0, r4, r3)
- mfvscr vr0
- li r4,THREAD_VSCR
- stvx vr0,r4,r3
- beq 1f
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r3,MSR_VEC@h
- andc r4,r4,r3 /* disable AltiVec for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- lis r4,last_task_used_altivec@ha
- stw r5,last_task_used_altivec@l(r4)
-#endif /* CONFIG_SMP */
- blr
-#endif /* CONFIG_ALTIVEC */
/*
* This code is jumped to from the startup code to copy
@@ -865,19 +804,6 @@ _ENTRY(copy_and_flush)
blr
#ifdef CONFIG_SMP
-#ifdef CONFIG_GEMINI
- .globl __secondary_start_gemini
-__secondary_start_gemini:
- mfspr r4,SPRN_HID0
- ori r4,r4,HID0_ICFI
- li r3,0
- ori r3,r3,HID0_ICE
- andc r4,r4,r3
- mtspr SPRN_HID0,r4
- sync
- b __secondary_start
-#endif /* CONFIG_GEMINI */
-
.globl __secondary_start_mpc86xx
__secondary_start_mpc86xx:
mfspr r3, SPRN_PIR
@@ -937,9 +863,9 @@ __secondary_start:
tophys(r4,r2)
addi r4,r4,THREAD /* phys address of our thread_struct */
CLR_TOP32(r4)
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
li r3,0
- mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
+ mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
/* enable MMU and jump to start_secondary */
li r4,MSR_KERNEL
@@ -952,6 +878,10 @@ __secondary_start:
RFI
#endif /* CONFIG_SMP */
+#ifdef CONFIG_KVM_BOOK3S_HANDLER
+#include "../kvm/book3s_rmhandlers.S"
+#endif
+
/*
* Those generic dummy functions are kept for CPUs not
* included in CONFIG_6xx
@@ -1020,9 +950,9 @@ start_here:
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
CLR_TOP32(r4)
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
li r3,0
- mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
+ mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
/* stack */
lis r1,init_thread_union@ha
@@ -1033,8 +963,8 @@ start_here:
* Do early platform-specific initialization,
* and set up the MMU.
*/
- mr r3,r31
- mr r4,r30
+ li r3,0
+ mr r4,r31
bl machine_init
bl __save_cpu_setup
bl MMU_init
@@ -1197,9 +1127,8 @@ mmu_off:
RFI
/*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET. From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
*/
initial_bats:
lis r11,PAGE_OFFSET@h
@@ -1209,12 +1138,16 @@ initial_bats:
bne 4f
ori r11,r11,4 /* set up BAT registers for 601 */
li r8,0x7f /* valid, block length = 8MB */
- oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */
- oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */
mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
mtspr SPRN_IBAT0L,r8 /* lower BAT register */
- mtspr SPRN_IBAT1U,r9
- mtspr SPRN_IBAT1L,r10
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT1U,r11
+ mtspr SPRN_IBAT1L,r8
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT2U,r11
+ mtspr SPRN_IBAT2L,r8
isync
blr
@@ -1273,6 +1206,28 @@ setup_cpm_bat:
blr
#endif
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+setup_usbgecko_bat:
+ /* prepare a BAT for early io */
+#if defined(CONFIG_GAMECUBE)
+ lis r8, 0x0c00
+#elif defined(CONFIG_WII)
+ lis r8, 0x0d00
+#else
+#error Invalid platform for USB Gecko based early debugging.
+#endif
+ /*
+ * The virtual address used must match the virtual address
+ * associated to the fixmap entry FIX_EARLY_DEBUG_BASE.
+ */
+ lis r11, 0xfffe /* top 128K */
+ ori r8, r8, 0x002a /* uncached, guarded ,rw */
+ ori r11, r11, 0x2 /* 128K, Vs=1, Vp=0 */
+ mtspr SPRN_DBAT1L, r8
+ mtspr SPRN_DBAT1U, r11
+ blr
+#endif
+
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
* We first disable the MMU, and then jump to the ROM reset address.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-11 07:27:26 +0000