diff options
Diffstat (limited to 'arch/powerpc/include/asm/qe.h')
| -rw-r--r-- | arch/powerpc/include/asm/qe.h | 70 |
1 files changed, 59 insertions, 11 deletions
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index 2701753d993..32b9bfa0c9b 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. * * Authors: Shlomi Gridish <gridish@freescale.com> * Li Yang <leoli@freescale.com> @@ -22,7 +22,7 @@ #include <asm/cpm.h> #include <asm/immap_qe.h> -#define QE_NUM_OF_SNUM 28 +#define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */ #define QE_NUM_OF_BRGS 16 #define QE_NUM_OF_PORTS 1024 @@ -87,7 +87,7 @@ extern spinlock_t cmxgcr_lock; /* Export QE common operations */ #ifdef CONFIG_QUICC_ENGINE -extern void __init qe_reset(void); +extern void qe_reset(void); #else static inline void qe_reset(void) {} #endif @@ -145,13 +145,47 @@ static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {} static inline void qe_pin_set_dedicated(struct qe_pin *pin) {} #endif /* CONFIG_QE_GPIO */ -/* QE internal API */ +#ifdef CONFIG_QUICC_ENGINE int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); +#else +static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, + u32 cmd_input) +{ + return -ENOSYS; +} +#endif /* CONFIG_QUICC_ENGINE */ + +/* QE internal API */ enum qe_clock qe_clock_source(const char *source); unsigned int qe_get_brg_clk(void); int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); +unsigned int qe_get_num_of_risc(void); +unsigned int qe_get_num_of_snums(void); + +static inline int qe_alive_during_sleep(void) +{ + /* + * MPC8568E reference manual says: + * + * "...power down sequence waits for all I/O interfaces to become idle. + * In some applications this may happen eventually without actively + * shutting down interfaces, but most likely, software will have to + * take steps to shut down the eTSEC, QUICC Engine Block, and PCI + * interfaces before issuing the command (either the write to the core + * MSR[WE] as described above or writing to POWMGTCSR) to put the + * device into sleep state." + * + * MPC8569E reference manual has a similar paragraph. + */ +#ifdef CONFIG_PPC_85xx + return 0; +#else + return 1; +#endif +} + /* we actually use cpm_muram implementation, define this for convenience */ #define qe_muram_init cpm_muram_init #define qe_muram_alloc cpm_muram_alloc @@ -162,7 +196,7 @@ void qe_put_snum(u8 snum); /* Structure that defines QE firmware binary files. * - * See Documentation/powerpc/qe-firmware.txt for a description of these + * See Documentation/powerpc/qe_firmware.txt for a description of these * fields. */ struct qe_firmware { @@ -206,8 +240,15 @@ struct qe_firmware_info { u64 extended_modes; /* Extended modes */ }; +#ifdef CONFIG_QUICC_ENGINE /* Upload a firmware to the QE */ int qe_upload_firmware(const struct qe_firmware *firmware); +#else +static inline int qe_upload_firmware(const struct qe_firmware *firmware) +{ + return -ENOSYS; +} +#endif /* CONFIG_QUICC_ENGINE */ /* Obtain information on the uploaded firmware */ struct qe_firmware_info *qe_get_firmware_info(void); @@ -231,12 +272,16 @@ struct qe_bd { #define QE_ALIGNMENT_OF_PRAM 64 /* RISC allocation */ -enum qe_risc_allocation { - QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ - QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ - QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose - RISC 1 or RISC 2 */ -}; +#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */ +#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */ +#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */ +#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */ +#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2) +#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2 | \ + QE_RISC_ALLOCATION_RISC3 | \ + QE_RISC_ALLOCATION_RISC4) /* QE extended filtering Table Lookup Key Size */ enum qe_fltr_tbl_lookup_key_size { @@ -454,6 +499,7 @@ enum comm_dir { /* I-RAM */ #define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ #define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ +#define QE_IRAM_READY 0x80000000 /* Ready */ /* UPC */ #define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ @@ -668,6 +714,8 @@ struct ucc_slow_pram { #define UCC_GETH_UPSMR_RMM 0x00001000 #define UCC_GETH_UPSMR_CAM 0x00000400 #define UCC_GETH_UPSMR_BRO 0x00000200 +#define UCC_GETH_UPSMR_SMM 0x00000080 +#define UCC_GETH_UPSMR_SGMM 0x00000020 /* UCC Transmit On Demand Register (UTODR) */ #define UCC_SLOW_TOD 0x8000 |