diff options
Diffstat (limited to 'arch/powerpc/include/asm/prom.h')
| -rw-r--r-- | arch/powerpc/include/asm/prom.h | 287 |
1 files changed, 121 insertions, 166 deletions
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index 2ab9cbd9882..74b79f07f04 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -1,4 +1,3 @@ -#include <linux/of.h> /* linux/of.h gets to determine #include ordering */ #ifndef _POWERPC_PROM_H #define _POWERPC_PROM_H #ifdef __KERNEL__ @@ -17,200 +16,156 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/types.h> -#include <linux/of_fdt.h> -#include <linux/proc_fs.h> -#include <linux/platform_device.h> #include <asm/irq.h> -#include <asm/atomic.h> - -#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 -#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 +#include <linux/atomic.h> -#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2)) -#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) -#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) - -extern struct device_node *of_chosen; +/* These includes should be removed once implicit includes are cleaned up. */ +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> -#define HAVE_ARCH_DEVTREE_FIXUPS +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, + * content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 -/* For updating the device tree at runtime */ -extern void of_attach_node(struct device_node *); -extern void of_detach_node(struct device_node *); +#define OF_DT_VERSION 0x10 -#ifdef CONFIG_PPC32 /* - * PCI <-> OF matching functions - * (XXX should these be here?) + * This is what gets passed to the kernel by prom_init or kexec + * + * The dt struct contains the device tree structure, full pathes and + * property contents. The dt strings contain a separate block with just + * the strings for the property names, and is fully page aligned and + * self contained in a page, so that it can be kept around by the kernel, + * each property name appears only once in this page (cheap compression) + * + * the mem_rsvmap contains a map of reserved ranges of physical memory, + * passing it here instead of in the device-tree itself greatly simplifies + * the job of everybody. It's just a list of u64 pairs (base/size) that + * ends when size is 0 */ -struct pci_bus; -struct pci_dev; -extern int pci_device_from_OF_node(struct device_node *node, - u8* bus, u8* devfn); -extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int); -extern struct device_node* pci_device_to_OF_node(struct pci_dev *); -extern void pci_create_OF_bus_map(void); -#endif - -extern struct resource *request_OF_resource(struct device_node* node, - int index, const char* name_postfix); -extern int release_OF_resource(struct device_node* node, int index); - +struct boot_param_header { + __be32 magic; /* magic word OF_DT_HEADER */ + __be32 totalsize; /* total size of DT block */ + __be32 off_dt_struct; /* offset to structure */ + __be32 off_dt_strings; /* offset to strings */ + __be32 off_mem_rsvmap; /* offset to memory reserve map */ + __be32 version; /* format version */ + __be32 last_comp_version; /* last compatible version */ + /* version 2 fields below */ + __be32 boot_cpuid_phys; /* Physical CPU id we're booting on */ + /* version 3 fields below */ + __be32 dt_strings_size; /* size of the DT strings block */ + /* version 17 fields below */ + __be32 dt_struct_size; /* size of the DT structure block */ +}; /* * OF address retreival & translation */ -/* Translate an OF address block into a CPU physical address - */ -extern u64 of_translate_address(struct device_node *np, const u32 *addr); - -/* Translate a DMA address from device space to CPU space */ -extern u64 of_translate_dma_address(struct device_node *dev, - const u32 *in_addr); - -/* Extract an address from a device, returns the region size and - * the address space flags too. The PCI version uses a BAR number - * instead of an absolute index - */ -extern const u32 *of_get_address(struct device_node *dev, int index, - u64 *size, unsigned int *flags); -#ifdef CONFIG_PCI -extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, - u64 *size, unsigned int *flags); -#else -static inline const u32 *of_get_pci_address(struct device_node *dev, - int bar_no, u64 *size, unsigned int *flags) -{ - return NULL; -} -#endif /* CONFIG_PCI */ - -/* Get an address as a resource. Note that if your address is - * a PIO address, the conversion will fail if the physical address - * can't be internally converted to an IO token with - * pci_address_to_pio(), that is because it's either called to early - * or it can't be matched to any host bridge IO space - */ -extern int of_address_to_resource(struct device_node *dev, int index, - struct resource *r); -#ifdef CONFIG_PCI -extern int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r); -#else -static inline int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r) -{ - return -ENOSYS; -} -#endif /* CONFIG_PCI */ - /* Parse the ibm,dma-window property of an OF node into the busno, phys and * size parameters. */ -void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, - unsigned long *busno, unsigned long *phys, unsigned long *size); +void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window, + unsigned long *busno, unsigned long *phys, + unsigned long *size); extern void kdump_move_device_tree(void); -/* CPU OF node matching */ -struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); +extern void of_instantiate_rtc(void); -/* cache lookup */ -struct device_node *of_find_next_cache_node(struct device_node *np); +extern int of_get_ibm_chip_id(struct device_node *np); -/* Get the MAC address */ -extern const void *of_get_mac_address(struct device_node *np); - -/* - * OF interrupt mapping +/* The of_drconf_cell struct defines the layout of the LMB array + * specified in the device tree property + * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory */ - -/* This structure is returned when an interrupt is mapped. The controller - * field needs to be put() after use - */ - -#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ - -struct of_irq { - struct device_node *controller; /* Interrupt controller node */ - u32 size; /* Specifier size */ - u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ +struct of_drconf_cell { + u64 base_addr; + u32 drc_index; + u32 reserved; + u32 aa_index; + u32 flags; }; -/** - * of_irq_map_init - Initialize the irq remapper - * @flags: flags defining workarounds to enable - * - * Some machines have bugs in the device-tree which require certain workarounds - * to be applied. Call this before any interrupt mapping attempts to enable - * those workarounds. - */ -#define OF_IMAP_OLDWORLD_MAC 0x00000001 -#define OF_IMAP_NO_PHANDLE 0x00000002 - -extern void of_irq_map_init(unsigned int flags); - -/** - * of_irq_map_raw - Low level interrupt tree parsing - * @parent: the device interrupt parent - * @intspec: interrupt specifier ("interrupts" property of the device) - * @ointsize: size of the passed in interrupt specifier - * @addr: address specifier (start of "reg" property of the device) - * @out_irq: structure of_irq filled by this function - * - * Returns 0 on success and a negative number on error - * - * This function is a low-level interrupt tree walking function. It - * can be used to do a partial walk with synthetized reg and interrupts - * properties, for example when resolving PCI interrupts when no device - * node exist for the parent. - * - */ - -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, - u32 ointsize, const u32 *addr, - struct of_irq *out_irq); - +#define DRCONF_MEM_ASSIGNED 0x00000008 +#define DRCONF_MEM_AI_INVALID 0x00000040 +#define DRCONF_MEM_RESERVED 0x00000080 -/** - * of_irq_map_one - Resolve an interrupt for a device - * @device: the device whose interrupt is to be resolved - * @index: index of the interrupt to resolve - * @out_irq: structure of_irq filled by this function - * - * This function resolves an interrupt, walking the tree, for a given - * device-tree node. It's the high level pendant to of_irq_map_raw(). - * It also implements the workarounds for OldWolrd Macs. +/* + * There are two methods for telling firmware what our capabilities are. + * Newer machines have an "ibm,client-architecture-support" method on the + * root node. For older machines, we have to call the "process-elf-header" + * method in the /packages/elf-loader node, passing it a fake 32-bit + * ELF header containing a couple of PT_NOTE sections that contain + * structures that contain various information. */ -extern int of_irq_map_one(struct device_node *device, int index, - struct of_irq *out_irq); -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. +/* New method - extensible architecture description vector. */ + +/* Option vector bits - generic bits in byte 1 */ +#define OV_IGNORE 0x80 /* ignore this vector */ +#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/ + +/* Option vector 1: processor architectures supported */ +#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */ +#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */ +#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */ +#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */ +#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */ +#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */ +#define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */ +#define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */ + +/* Option vector 2: Open Firmware options supported */ +#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ + +/* Option vector 3: processor options supported */ +#define OV3_FP 0x80 /* floating point */ +#define OV3_VMX 0x40 /* VMX/Altivec */ +#define OV3_DFP 0x20 /* decimal FP */ + +/* Option vector 4: IBM PAPR implementation */ +#define OV4_MIN_ENT_CAP 0x01 /* minimum VP entitled capacity */ + +/* Option vector 5: PAPR/OF options supported + * These bits are also used in firmware_has_feature() to validate + * the capabilities reported for vector 5 in the device tree so we + * encode the vector index in the define and use the OV5_FEAT() + * and OV5_INDX() macros to extract the desired information. */ -struct pci_dev; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - -extern int of_irq_to_resource(struct device_node *dev, int index, - struct resource *r); +#define OV5_FEAT(x) ((x) & 0xff) +#define OV5_INDX(x) ((x) >> 8) +#define OV5_LPAR 0x0280 /* logical partitioning supported */ +#define OV5_SPLPAR 0x0240 /* shared-processor LPAR supported */ +/* ibm,dynamic-reconfiguration-memory property supported */ +#define OV5_DRCONF_MEMORY 0x0220 +#define OV5_LARGE_PAGES 0x0210 /* large pages supported */ +#define OV5_DONATE_DEDICATE_CPU 0x0202 /* donate dedicated CPU support */ +#define OV5_MSI 0x0201 /* PCIe/MSI support */ +#define OV5_CMO 0x0480 /* Cooperative Memory Overcommitment */ +#define OV5_XCMO 0x0440 /* Page Coalescing */ +#define OV5_TYPE1_AFFINITY 0x0580 /* Type 1 NUMA affinity */ +#define OV5_PRRN 0x0540 /* Platform Resource Reassignment */ +#define OV5_PFO_HW_RNG 0x0E80 /* PFO Random Number Generator */ +#define OV5_PFO_HW_842 0x0E40 /* PFO Compression Accelerator */ +#define OV5_PFO_HW_ENCR 0x0E20 /* PFO Encryption Accelerator */ +#define OV5_SUB_PROCESSORS 0x0F01 /* 1,2,or 4 Sub-Processors supported */ + +/* Option Vector 6: IBM PAPR hints */ +#define OV6_LINUX 0x02 /* Linux is our OS */ -/** - * of_iomap - Maps the memory mapped IO for a given device_node - * @device: the device whose io range will be mapped - * @index: index of the io range - * - * Returns a pointer to the mapped memory +/* + * The architecture vector has an array of PVR mask/value pairs, + * followed by # option vectors - 1, followed by the option vectors. */ -extern void __iomem *of_iomap(struct device_node *device, int index); +extern unsigned char ibm_architecture_vec[]; #endif /* __KERNEL__ */ #endif /* _POWERPC_PROM_H */ |