diff options
Diffstat (limited to 'arch/powerpc/include/asm/ppc460ex_plb_adma.h')
| -rwxr-xr-x | arch/powerpc/include/asm/ppc460ex_plb_adma.h | 575 |
1 files changed, 575 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/ppc460ex_plb_adma.h b/arch/powerpc/include/asm/ppc460ex_plb_adma.h new file mode 100755 index 00000000000..965786e1d4b --- /dev/null +++ b/arch/powerpc/include/asm/ppc460ex_plb_adma.h @@ -0,0 +1,575 @@ + + +#include <linux/types.h> + + +#define to_ppc460ex_adma_chan(chan) container_of(chan,ppc460ex_p_ch_t,common) +#define to_ppc460ex_adma_device(dev) container_of(dev,ppc460ex_p_dev_t,common) +#define tx_to_ppc460ex_adma_slot(tx) container_of(tx,ppc460ex_p_desc_t,async_tx) + + +#define DMA_HEXDUMP(b, l) \ + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_OFFSET, \ + 16, 1, (b), (l), false); + +#define PPC460EX_DMA_PROC_ROOT "driver/460ex_plb_dma" + +#define MAX_PPC460EX_DMA_CHANNELS 4 + +#define PPC460EX_ADMA_DMA_MAX_BYTE_COUNT 1024 * 1024 + +#define PPC460EX_ADMA_THRESHOLD 1 + +#define DCR_DMA0_BASE 0x200 +#define DCR_DMA1_BASE 0x208 +#define DCR_DMA2_BASE 0x210 +#define DCR_DMA3_BASE 0x218 +#define DCR_DMASR_BASE 0x220 + +#define PPC460EX_PDMA0_ID 0 +#define PPC460EX_PDMA1_ID 1 +#define PPC460EX_PDMA2_ID 2 +#define PPC460EX_PDMA3_ID 3 + + +#define DMA_FIFO_SIZE 0x1000 + +#define DMA_CDB_SIZE 64 + + +/* DMA Registers */ +#define DCR_DMA2P40_CR0 (DCR_DMA0_BASE + 0x0) /* DMA Channel Control 0 */ +#define DCR_DMA2P40_CTC0 (DCR_DMA0_BASE + 0x1) /* DMA Count 0 */ +#define DCR_DMA2P40_SAH0 (DCR_DMA0_BASE + 0x2) /* DMA Src Addr High 0 */ +#define DCR_DMA2P40_SAL0 (DCR_DMA0_BASE + 0x3) /* DMA Src Addr Low 0 */ +#define DCR_DMA2P40_DAH0 (DCR_DMA0_BASE + 0x4) /* DMA Dest Addr High 0 */ +#define DCR_DMA2P40_DAL0 (DCR_DMA0_BASE + 0x5) /* DMA Dest Addr Low 0 */ +#define DCR_DMA2P40_SGH0 (DCR_DMA0_BASE + 0x6) /* DMA SG Desc Addr High 0 */ +#define DCR_DMA2P40_SGL0 (DCR_DMA0_BASE + 0x7) /* DMA SG Desc Addr Low 0 */ + +#define DCR_DMA2P40_CR1 (DCR_DMA1_BASE + 0x0) /* DMA Channel Control 1 */ +#define DCR_DMA2P40_CTC1 (DCR_DMA1_BASE + 0x1) /* DMA Count 1 */ +#define DCR_DMA2P40_SAH1 (DCR_DMA1_BASE + 0x2) /* DMA Src Addr High 1 */ +#define DCR_DMA2P40_SAL1 (DCR_DMA1_BASE + 0x3) /* DMA Src Addr Low 1 */ +#define DCR_DMA2P40_DAH1 (DCR_DMA1_BASE + 0x4) /* DMA Dest Addr High 1 */ +#define DCR_DMA2P40_DAL1 (DCR_DMA1_BASE + 0x5) /* DMA Dest Addr Low 1 */ +#define DCR_DMA2P40_SGH1 (DCR_DMA1_BASE + 0x6) /* DMA SG Desc Addr High 1 */ +#define DCR_DMA2P40_SGL1 (DCR_DMA1_BASE + 0x7) /* DMA SG Desc Addr Low 1 */ + +#define DCR_DMA2P40_CR2 (DCR_DMA2_BASE + 0x0) /* DMA Channel Control 2 */ +#define DCR_DMA2P40_CTC2 (DCR_DMA2_BASE + 0x1) /* DMA Count 2 */ +#define DCR_DMA2P40_SAH2 (DCR_DMA2_BASE + 0x2) /* DMA Src Addr High 2 */ +#define DCR_DMA2P40_SAL2 (DCR_DMA2_BASE + 0x3) /* DMA Src Addr Low 2 */ +#define DCR_DMA2P40_DAH2 (DCR_DMA2_BASE + 0x4) /* DMA Dest Addr High 2 */ +#define DCR_DMA2P40_DAL2 (DCR_DMA2_BASE + 0x5) /* DMA Dest Addr Low 2 */ +#define DCR_DMA2P40_SGH2 (DCR_DMA2_BASE + 0x6) /* DMA SG Desc Addr High 2 */ +#define DCR_DMA2P40_SGL2 (DCR_DMA2_BASE + 0x7) /* DMA SG Desc Addr Low 2 */ + +#define DCR_DMA2P40_CR3 (DCR_DMA3_BASE + 0x0) /* DMA Channel Control 3 */ +#define DCR_DMA2P40_CTC3 (DCR_DMA3_BASE + 0x1) /* DMA Count 3 */ +#define DCR_DMA2P40_SAH3 (DCR_DMA3_BASE + 0x2) /* DMA Src Addr High 3 */ +#define DCR_DMA2P40_SAL3 (DCR_DMA3_BASE + 0x3) /* DMA Src Addr Low 3 */ +#define DCR_DMA2P40_DAH3 (DCR_DMA3_BASE + 0x4) /* DMA Dest Addr High 3 */ +#define DCR_DMA2P40_DAL3 (DCR_DMA3_BASE + 0x5) /* DMA Dest Addr Low 3 */ +#define DCR_DMA2P40_SGH3 (DCR_DMA3_BASE + 0x6) /* DMA SG Desc Addr High 3 */ +#define DCR_DMA2P40_SGL3 (DCR_DMA3_BASE + 0x7) /* DMA SG Desc Addr Low 3 */ + +#define DCR_DMA2P40_SR (DCR_DMASR_BASE + 0x0) /* DMA Status Register */ +#define DCR_DMA2P40_SGC (DCR_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */ +#define DCR_DMA2P40_SLP (DCR_DMASR_BASE + 0x5) /* DMA Sleep Register */ +#define DCR_DMA2P40_POL (DCR_DMASR_BASE + 0x6) /* DMA Polarity Register */ + + + +/* + * Function return status codes + * These values are used to indicate whether or not the function + * call was successful, or a bad/invalid parameter was passed. + */ +#define DMA_STATUS_GOOD 0 +#define DMA_STATUS_BAD_CHANNEL 1 +#define DMA_STATUS_BAD_HANDLE 2 +#define DMA_STATUS_BAD_MODE 3 +#define DMA_STATUS_NULL_POINTER 4 +#define DMA_STATUS_OUT_OF_MEMORY 5 +#define DMA_STATUS_SGL_LIST_EMPTY 6 +#define DMA_STATUS_GENERAL_ERROR 7 +#define DMA_STATUS_CHANNEL_NOTFREE 8 + +#define DMA_CHANNEL_BUSY 0x80000000 + +/* + * These indicate status as returned from the DMA Status Register. + */ +#define DMA_STATUS_NO_ERROR 0 +#define DMA_STATUS_CS 1 /* Count Status */ +#define DMA_STATUS_TS 2 /* Transfer Status */ +#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */ +#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */ + +/* + * DMA Channel Control Registers + */ +#ifdef CONFIG_44x +#define PPC4xx_DMA_64BIT +#define DMA_CR_OFFSET 1 +#else +#define DMA_CR_OFFSET 0 +#endif + +#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */ +#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31) +#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31) + +#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */ +#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30) +#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30) + +#define DMA_TD (1<<29) +#define SET_DMA_TD(x) (((x)&0x1)<<29) +#define GET_DMA_TD(x) (((x)&DMA_TD)>>29) + +#define DMA_PL (1<<28) /* Peripheral Location */ +#define SET_DMA_PL(x) (((x)&0x1)<<28) +#define GET_DMA_PL(x) (((x)&DMA_PL)>>28) + +#define EXTERNAL_PERIPHERAL 0 +#define INTERNAL_PERIPHERAL 1 + +#define SET_DMA_PW(x) (((x)&0x7)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */ +#define DMA_PW_MASK SET_DMA_PW(7) +#define PW_8 0 +#define PW_16 1 +#define PW_32 2 +#define PW_64 3 +#define PW_128 4 + + +#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET)) + +#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */ +#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET)) + +#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */ +#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET)) + +#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */ +#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET)) + +#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */ +#define DMA_TM_MASK SET_DMA_TM(3) +#define TM_PERIPHERAL 0 /* Peripheral */ +#define TM_RESERVED 1 /* Reserved */ +#define TM_S_MM 2 /* Memory to Memory */ +#define TM_D_MM 3 /* Device Paced Memory to Memory */ +#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET)) + +#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */ +#define DMA_PSC_MASK SET_DMA_PSC(3) +#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET)) + +#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */ +#define DMA_PWC_MASK SET_DMA_PWC(0x3F) +#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET)) + +#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */ +#define DMA_PHC_MASK SET_DMA_PHC(0x7) +#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET)) + +#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */ +#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET)) + +#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET)) +#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET)) + +#define DMA_DEC (1<<(2)) /* Address Decrement */ +#define SET_DMA_DEC(x) (((x)&0x1)<<2) +#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2) + + +/* + * Transfer Modes + * These modes are defined in a way that makes it possible to + * simply "or" in the value in the control register. + */ + +#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */ + + /* Device-paced memory to memory, */ + /* device is at source address */ +#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM)) + + /* Device-paced memory to memory, */ + /* device is at destination address */ +#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM)) + +#define SGL_LIST_SIZE 16384 +#define DMA_PPC4xx_SIZE SGL_LIST_SIZE + +#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */ +#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3) +#define PRIORITY_LOW 0 +#define PRIORITY_MID_LOW 1 +#define PRIORITY_MID_HIGH 2 +#define PRIORITY_HIGH 3 +#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET)) + + +#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */ +#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3) +#define PREFETCH_1 0 /* Prefetch 1 Double Word */ +#define PREFETCH_2 1 +#define PREFETCH_4 2 +#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET)) + +#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */ +#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET)) +#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET)) + +/* + * DMA Polarity Configuration Register + */ +#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3))) +#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3))) +#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */ + +/* + * DMA Sleep Mode Register + */ +#define SLEEP_MODE_ENABLE (1<<21) + +/* + * DMA Status Register + */ +#define DMA_CS0 (1<<31) /* Terminal Count has been reached */ +#define DMA_CS1 (1<<30) +#define DMA_CS2 (1<<29) +#define DMA_CS3 (1<<28) + +#define DMA_TS0 (1<<27) /* End of Transfer has been requested */ +#define DMA_TS1 (1<<26) +#define DMA_TS2 (1<<25) +#define DMA_TS3 (1<<24) + +#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */ +#define DMA_CH1_ERR (1<<22) +#define DMA_CH2_ERR (1<<21) +#define DMA_CH3_ERR (1<<20) + +#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */ +#define DMA_IN_DMA_REQ1 (1<<18) +#define DMA_IN_DMA_REQ2 (1<<17) +#define DMA_IN_DMA_REQ3 (1<<16) + +#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */ +#define DMA_EXT_DMA_REQ1 (1<<14) +#define DMA_EXT_DMA_REQ2 (1<<13) +#define DMA_EXT_DMA_REQ3 (1<<12) + +#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */ +#define DMA_CH1_BUSY (1<<10) +#define DMA_CH2_BUSY (1<<9) +#define DMA_CH3_BUSY (1<<8) + +#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */ +#define DMA_SG1 (1<<6) +#define DMA_SG2 (1<<5) +#define DMA_SG3 (1<<4) + +/* DMA Channel Count Register */ +#define DMA_CTC_TCIE (1<<29) /* Terminal Count Interrupt Enable */ +#define DMA_CTC_ETIE (1<<28) /* EOT Interupt Enable */ +#define DMA_CTC_EIE (1<<27) /* Error Interrupt Enable */ +#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */ +#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */ +#define DMA_CTC_BSIZ_2 (0) +#define DMA_CTC_BSIZ_4 (1<<21) +#define DMA_CTC_BSIZ_8 (2<<21) +#define DMA_CTC_BSIZ_16 (3<<21) +#define DMA_CTC_TC_MASK 0xFFFFF + +/* + * DMA SG Command Register + */ +#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */ +#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */ + + +/* + * DMA Scatter/Gather Descriptor Bit fields + */ +#define SG_LINK (1<<31) /* Link */ +#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */ +#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */ +#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */ +#define SG_COUNT_MASK 0xFFFF /* Count Field */ + +#define SET_DMA_CONTROL \ + (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \ + SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\ + SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \ + SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \ + SET_DMA_PL(p_init->pl) | /* peripheral location */ \ + SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \ + SET_DMA_SAI(p_init->sai) | /* src addr increment */ \ + SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \ + SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \ + SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \ + SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \ + SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \ + SET_DMA_PREFETCH(p_init->pf) /* read prefetch */) + +#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan)) + + +/** + * struct ppc460ex_dma_device - internal representation of an DMA device + * @pdev: Platform device + * @id: HW DMA Device selector + * @dma_desc_pool: base of DMA descriptor region (DMA address) + * @dma_desc_pool_virt: base of DMA descriptor region (CPU address) + * @common: embedded struct dma_device + */ +typedef struct ppc460ex_plb_dma_device { + //struct platform_device *pdev; + struct of_device *odev; + void __iomem *reg_base; + struct device *dev; + struct resource reg; /* Resource for register */ + int id; + struct dma_device common; + struct ppc460ex_plb_dma_chan *chan[MAX_PPC460EX_DMA_CHANNELS]; + wait_queue_head_t queue; +} ppc460ex_p_dev_t; + +typedef uint32_t sgl_handle_t; +/** + * struct ppc460ex_dma_chan - internal representation of an ADMA channel + * @lock: serializes enqueue/dequeue operations to the slot pool + * @device: parent device + * @chain: device chain view of the descriptors + * @common: common dmaengine channel object members + * @all_slots: complete domain of slots usable by the channel + * @reg: Resource for register + * @pending: allows batching of hardware operations + * @completed_cookie: identifier for the most recently completed operation + * @slots_allocated: records the actual size of the descriptor slot pool + * @hw_chain_inited: h/w descriptor chain initialization flag + * @irq_tasklet: bottom half where ppc460ex_adma_slot_cleanup runs + * @needs_unmap: if buffers should not be unmapped upon final processing + */ +typedef struct ppc460ex_plb_dma_chan { + spinlock_t lock; + void __iomem *reg_base; + struct ppc460ex_plb_dma_device *device; + struct timer_list cleanup_watchdog; + struct list_head chain; + struct dma_chan common; + struct list_head all_slots; + struct ppc460ex_adma_desc_slot *last_used; + int pending; + dma_cookie_t completed_cookie; + int slots_allocated; + int hw_chain_inited; + void *dma_desc_pool_virt; + dma_addr_t dma_desc_pool; + + struct resource reg; /* Resource for register */ + unsigned int chan_id; + struct tasklet_struct irq_tasklet; + u8 needs_unmap; + sgl_handle_t *phandle; + unsigned short in_use; /* set when channel is being used, clr when + * available. + */ + /* + * Valid polarity settings: + * DMAReq_ActiveLow(n) + * DMAAck_ActiveLow(n) + * EOT_ActiveLow(n) + * + * n is 0 to max dma chans + */ + unsigned int polarity; + + char buffer_enable; /* Boolean: buffer enable */ + char tce_enable; /* Boolean: terminal count enable */ + char etd_output; /* Boolean: eot pin is a tc output */ + char pce; /* Boolean: parity check enable */ + + /* + * Peripheral location: + * INTERNAL_PERIPHERAL (UART0 on the 405GP) + * EXTERNAL_PERIPHERAL + */ + char pl; /* internal/external peripheral */ + + /* + * Valid pwidth settings: + * PW_8 + * PW_16 + * PW_32 + * PW_64 + */ + unsigned int pwidth; + + char dai; /* Boolean: dst address increment */ + char sai; /* Boolean: src address increment */ + + /* + * Valid psc settings: 0-3 + */ + unsigned int psc; /* Peripheral Setup Cycles */ + + /* + * Valid pwc settings: + * 0-63 + */ + unsigned int pwc; /* Peripheral Wait Cycles */ + + /* + * Valid phc settings: + * 0-7 + */ + unsigned int phc; /* Peripheral Hold Cycles */ + + /* + * Valid cp (channel priority) settings: + * PRIORITY_LOW + * PRIORITY_MID_LOW + * PRIORITY_MID_HIGH + * PRIORITY_HIGH + */ + unsigned int cp; /* channel priority */ + + /* + * Valid pf (memory read prefetch) settings: + * + * PREFETCH_1 + * PREFETCH_2 + * PREFETCH_4 + */ + unsigned int pf; /* memory read prefetch */ + + /* + * Boolean: channel interrupt enable + * NOTE: for sgl transfers, only the last descriptor will be setup to + * interrupt. + */ + char int_enable; + + char shift; /* easy access to byte_count shift, based on */ + /* the width of the channel */ + + uint32_t control; /* channel control word */ + + /* These variabled are used ONLY in single dma transfers */ + unsigned int mode; /* transfer mode */ + phys_addr_t addr; + char ce; /* channel enable */ + char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */ + +} ppc460ex_p_ch_t; +typedef struct ppc460ex_adma_plb_desc_slot { + dma_addr_t phys; + struct ppc460ex_adma_plb_desc_slot *group_head; + struct ppc460ex_adma_plb_desc_slot *hw_next; + struct dma_async_tx_descriptor async_tx; + struct list_head slot_node; + struct list_head chain_node; + struct list_head group_list; + unsigned int unmap_len; + void *hw_desc; + u16 stride; + u16 idx; + u16 slot_cnt; + u8 src_cnt; + u8 dst_cnt; + u8 slots_per_op; + u8 descs_per_op; + unsigned long flags; + unsigned long reverse_flags[8]; +#define PPC460EX_DESC_INT 0 /* generate interrupt on complete */ + +}ppc460ex_p_desc_t; + +typedef struct ppc460ex_adma_plb_platform_data { + int hw_id; + dma_cap_mask_t cap_mask; + size_t pool_size; +} ppc460ex_p_aplat_t; + +typedef struct dma_cdb { + u32 ctrl; + u32 cnt; + u32 src_hi; + u32 src_lo; + u32 dest_hi; + u32 dest_lo; + u32 sg_hi; + u32 sg_lo; +}dma_cdb_t; +/* + * PPC44x DMA implementations have a slightly different + * descriptor layout. Probably moved about due to the + * change to 64-bit addresses and link pointer. I don't + * know why they didn't just leave control_count after + * the dst_addr. + */ +#ifdef PPC4xx_DMA_64BIT +typedef struct { + uint32_t control; + uint32_t control_count; + phys_addr_t src_addr; + phys_addr_t dst_addr; + phys_addr_t next; +} ppc_sgl_t; +#else +typedef struct { + uint32_t control; + phys_addr_t src_addr; + phys_addr_t dst_addr; + uint32_t control_count; + uint32_t next; +} ppc_sgl_t; +#endif + + + +typedef struct { + unsigned int ch_id; + uint32_t control; /* channel ctrl word; loaded from each descrptr */ + uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */ + dma_addr_t dma_addr; /* dma (physical) address of this list */ + ppc_sgl_t *phead; + dma_addr_t phead_dma; + ppc_sgl_t *ptail; + dma_addr_t ptail_dma; +} sgl_list_info_t; + +typedef struct { + phys_addr_t *src_addr; + phys_addr_t *dst_addr; + phys_addr_t dma_src_addr; + phys_addr_t dma_dst_addr; +} pci_alloc_desc_t; + +#define PPC460EX_DMA_SGXFR_COMPLETE(id) (!((1 << (11-id)) & mfdcr(DCR_DMA2P40_SR))) +#define PPC460EX_DMA_CHAN_BUSY(id) ( (1 << (11-id)) & mfdcr(DCR_DMA2P40_SR) ) +#define DMA_STATUS(id) (mfdcr(DCR_DMA2P40_SR)) +#define CLEAR_DMA_STATUS(id) (mtdcr(DCR_DMA2P40_SR, 0xFFFFFFFF)) +#define PPC460EX_DMA_SGSTAT_FREE(id) (!((1 << (7-id)) & mfdcr(DCR_DMA2P40_SR)) ) +#define PPC460EX_DMA_TC_REACHED(id) ( (1 << (31-id)) & mfdcr(DCR_DMA2P40_SR) ) +#define PPC460EX_DMA_CHAN_XFR_COMPLETE(id) ( (!PPC460EX_DMA_CHAN_BUSY(id)) && (PPC460EX_DMA_TC_REACHED(id)) ) +#define PPC460EX_DMA_CHAN_SGXFR_COMPLETE(id) ( (!PPC460EX_DMA_CHAN_BUSY(id)) && PPC460EX_DMA_SGSTAT_FREE(id) ) +#define PPC460EX_DMA_SG_IN_PROGRESS(id) ( (1 << (7-id)) | (1 << (11-id)) ) +#define PPC460EX_DMA_SG_OP_COMPLETE(id) ( (PPC460EX_DMA_SG_IN_PROGRESS(id) & DMA_STATUS(id) ) == 0) + + + +#if 0 +extern int test_dma_memcpy(void *src, void *dst, unsigned int length, unsigned int dma_ch); + +extern int test_sgdma_memcpy(void *src, void *dst, void *src1, void *dst1, + unsigned int length, unsigned int dma_ch); +#endif |