diff options
Diffstat (limited to 'arch/powerpc/include/asm/fsl_guts.h')
| -rw-r--r-- | arch/powerpc/include/asm/fsl_guts.h | 38 |
1 files changed, 15 insertions, 23 deletions
diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h index bebd12463ec..77ced0b3d81 100644 --- a/arch/powerpc/include/asm/fsl_guts.h +++ b/arch/powerpc/include/asm/fsl_guts.h @@ -4,7 +4,7 @@ * Authors: Jeff Brown * Timur Tabi <timur@freescale.com> * - * Copyright 2004,2007 Freescale Semiconductor, Inc + * Copyright 2004,2007,2012 Freescale Semiconductor, Inc * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -16,15 +16,6 @@ #define __ASM_POWERPC_FSL_GUTS_H__ #ifdef __KERNEL__ -/* - * These #ifdefs are safe because it's not possible to build a kernel that - * runs on e500 and e600 cores. - */ - -#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx) -#error Only 85xx and 86xx SOCs are supported -#endif - /** * Global Utility Registers. * @@ -36,11 +27,7 @@ * different names. In these cases, one name is chosen to avoid extraneous * #ifdefs. */ -#ifdef CONFIG_PPC_85xx -struct ccsr_guts_85xx { -#else -struct ccsr_guts_86xx { -#endif +struct ccsr_guts { __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ @@ -61,6 +48,8 @@ struct ccsr_guts_86xx { __be32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */ u8 res06c[0x70 - 0x6c]; __be32 devdisr; /* 0x.0070 - Device Disable Control */ +#define CCSR_GUTS_DEVDISR_TB1 0x00001000 +#define CCSR_GUTS_DEVDISR_TB0 0x00004000 __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ u8 res078[0x7c - 0x78]; __be32 pmjcr; /* 0x.007c - 4 Power Management Jog Control Register */ @@ -77,15 +66,14 @@ struct ccsr_guts_86xx { u8 res0a8[0xb0 - 0xa8]; __be32 rstcr; /* 0x.00b0 - Reset Control Register */ u8 res0b4[0xc0 - 0xb4]; -#ifdef CONFIG_PPC_85xx - __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register */ -#else - __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ -#endif + __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register + Called 'elbcvselcr' on 86xx SOCs */ u8 res0c4[0x224 - 0xc4]; __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */ __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */ - u8 res22c[0x800 - 0x22c]; + u8 res22c[0x604 - 0x22c]; + __be32 pamubypenr; /* 0x.604 - PAMU bypass enable register */ + u8 res608[0x800 - 0x608]; __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ u8 res804[0x900 - 0x804]; __be32 ircr; /* 0x.0900 - Infrared Control Register */ @@ -114,6 +102,10 @@ struct ccsr_guts_86xx { __be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */ } __attribute__ ((packed)); + +/* Alternate function signal multiplex control */ +#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x)) + #ifdef CONFIG_PPC_86xx #define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ @@ -132,7 +124,7 @@ struct ccsr_guts_86xx { * ch: The channel on the DMA controller (0, 1, 2, or 3) * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) */ -static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts, +static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, unsigned int co, unsigned int ch, unsigned int device) { unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); @@ -168,7 +160,7 @@ static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts, * ch: The channel on the DMA controller (0, 1, 2, or 3) * value: the new value for the bit (0 or 1) */ -static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts, +static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, unsigned int co, unsigned int ch, unsigned int value) { if ((ch == 0) || (ch == 3)) { |