diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8610_hpcd.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8610_hpcd.dts | 81 |
1 files changed, 76 insertions, 5 deletions
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index f724d72c7b9..6a109a0ceac 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -35,6 +35,8 @@ i-cache-line-size = <32>; d-cache-size = <32768>; // L1 i-cache-size = <32768>; // L1 + sleep = <&pmc 0x00008000 0 // core + &pmc 0x00004000 0>; // timebase timebase-frequency = <0>; // From uboot bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot @@ -60,6 +62,7 @@ 5 0 0xe8480000 0x00008000 6 0 0xe84c0000 0x00008000 3 0 0xe8000000 0x00000020>; + sleep = <&pmc 0x08000000 0>; flash@0,0 { compatible = "cfi-flash"; @@ -100,8 +103,20 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,fpga-pixis"; reg = <3 0 0x20>; + ranges = <0 3 0 0x20>; + interrupt-parent = <&mpic>; + interrupts = <8 8>; + + sdcsr_pio: gpio-controller@a { + #gpio-cells = <2>; + compatible = "fsl,fpga-pixis-gpio-bank"; + reg = <0xa 1>; + gpio-controller; + }; }; }; @@ -112,9 +127,21 @@ device_type = "soc"; compatible = "fsl,mpc8610-immr", "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; - reg = <0xe0000000 0x1000>; bus-frequency = <0>; + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8610-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -141,27 +168,53 @@ reg = <0x3100 0x100>; interrupts = <43 2>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x00000004 0>; dfsrr; }; serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x00000002 0>; }; serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x00000008 0>; + }; + + spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8610-spi", "fsl,spi"; + reg = <0x7000 0x40>; + cell-index = <0>; + interrupts = <59 2>; + interrupt-parent = <&mpic>; + mode = "cpu"; + gpios = <&sdcsr_pio 7 0>; + sleep = <&pmc 0x00000800 0>; + + mmc-slot@0 { + compatible = "fsl,mpc8610hpcd-mmc-slot", + "mmc-spi-slot"; + reg = <0>; + gpios = <&sdcsr_pio 0 1 /* nCD */ + &sdcsr_pio 1 0>; /* WP */ + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + }; }; display@2c000 { @@ -169,6 +222,7 @@ reg = <0x2c000 100>; interrupts = <72 2>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x04000000 0>; }; mpic: interrupt-controller@40000 { @@ -197,9 +251,18 @@ }; global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,mpc8610-guts"; reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8610-pmc", + "fsl,mpc8641d-pmc"; + reg = <0x70 0x20>; + }; }; wdt@e4000 { @@ -217,14 +280,19 @@ codec-handle = <&cs4270>; fsl,playback-dma = <&dma00>; fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <8>; + sleep = <&pmc 0 0x08000000>; }; ssi@16100 { compatible = "fsl,mpc8610-ssi"; + status = "disabled"; cell-index = <1>; reg = <0x16100 0x100>; interrupt-parent = <&mpic>; interrupts = <63 2>; + fsl,fifo-depth = <8>; + sleep = <&pmc 0 0x04000000>; }; dma@21300 { @@ -234,6 +302,7 @@ cell-index = <0>; reg = <0x21300 0x4>; /* DMA general status register */ ranges = <0x0 0x21100 0x200>; + sleep = <&pmc 0x00000400 0>; dma00: dma-channel@0 { compatible = "fsl,mpc8610-dma-channel", @@ -276,6 +345,7 @@ cell-index = <1>; reg = <0xc300 0x4>; /* DMA general status register */ ranges = <0x0 0xc100 0x200>; + sleep = <&pmc 0x00000200 0>; dma-channel@0 { compatible = "fsl,mpc8610-dma-channel", @@ -314,7 +384,6 @@ }; pci0: pci@e0008000 { - cell-index = <0>; compatible = "fsl,mpc8610-pci"; device_type = "pci"; #interrupt-cells = <1>; @@ -324,6 +393,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>; + sleep = <&pmc 0x80000000 0>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <24 2>; @@ -344,7 +414,6 @@ }; pci1: pcie@e000a000 { - cell-index = <1>; compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; @@ -354,6 +423,7 @@ bus-range = <1 3>; ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + sleep = <&pmc 0x40000000 0>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <26 2>; @@ -430,6 +500,7 @@ 0x0000 0 0 4 &mpic 7 1>; interrupt-parent = <&mpic>; interrupts = <25 2>; + sleep = <&pmc 0x20000000 0>; clock-frequency = <33333333>; }; }; |