diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc836x_rdk.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc836x_rdk.dts | 57 |
1 files changed, 48 insertions, 9 deletions
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index 89c9202f8bd..daeacbdcf8b 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -71,6 +71,13 @@ reg = <0x200 0x100>; }; + pmc: power@b00 { + compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -95,7 +102,7 @@ serial0: serial@4500 { device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; interrupts = <9 8>; interrupt-parent = <&ipic>; @@ -105,7 +112,7 @@ serial1: serial@4600 { device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; interrupts = <10 8>; interrupt-parent = <&ipic>; @@ -125,24 +132,28 @@ dma-channel@0 { compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; reg = <0 0x80>; + cell-index = <0>; interrupt-parent = <&ipic>; interrupts = <71 8>; }; dma-channel@80 { compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; reg = <0x80 0x80>; + cell-index = <1>; interrupt-parent = <&ipic>; interrupts = <71 8>; }; dma-channel@100 { compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; reg = <0x100 0x80>; + cell-index = <2>; interrupt-parent = <&ipic>; interrupts = <71 8>; }; dma-channel@180 { compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; reg = <0x180 0x28>; + cell-index = <3>; interrupt-parent = <&ipic>; interrupts = <71 8>; }; @@ -157,6 +168,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x7e>; fsl,descriptor-types-mask = <0x01010ebf>; + sleep = <&pmc 0x03000000>; }; ipic: interrupt-controller@700 { @@ -194,6 +206,8 @@ clock-frequency = <0>; bus-frequency = <0>; brg-frequency = <0>; + fsl,qe-num-riscs = <2>; + fsl,qe-num-snums = <28>; muram@10000 { #address-cells = <1>; @@ -214,8 +228,23 @@ reg = <0x440 0x40>; interrupts = <12 13 14 15>; interrupt-parent = <&qeic>; - /* filled by u-boot */ - clock-frequency = <0>; + clock-frequency = <166666666>; + }; + + usb@6c0 { + compatible = "fsl,mpc8360-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk21"; + gpios = <&qe_pio_b 2 0 /* USBOE */ + &qe_pio_b 3 0 /* USBTP */ + &qe_pio_b 8 0 /* USBTN */ + &qe_pio_b 9 0 /* USBRP */ + &qe_pio_b 11 0 /* USBRN */ + &qe_pio_e 20 0 /* SPEED */ + &qe_pio_e 21 1 /* POWER */>; }; spi@4c0 { @@ -303,25 +332,21 @@ reg = <0x2120 0x18>; phy1: ethernet-phy@1 { - device_type = "ethernet-phy"; compatible = "national,DP83848VV"; reg = <1>; }; phy2: ethernet-phy@2 { - device_type = "ethernet-phy"; compatible = "broadcom,BCM5481UA2KMLG"; reg = <2>; }; phy3: ethernet-phy@3 { - device_type = "ethernet-phy"; compatible = "national,DP83848VV"; reg = <3>; }; phy4: ethernet-phy@4 { - device_type = "ethernet-phy"; compatible = "broadcom,BCM5481UA2KMLG"; reg = <4>; }; @@ -383,6 +408,18 @@ device-width = <1>; }; + upm@1,0 { + compatible = "fsl,upm-nand"; + reg = <1 0 1>; + fsl,upm-addr-offset = <16>; + fsl,upm-cmd-offset = <8>; + gpios = <&qe_pio_e 18 0>; + + flash { + compatible = "stm,nand512-a"; + }; + }; + display@2,0 { device_type = "display"; compatible = "fujitsu,MB86277", "fujitsu,mint"; @@ -405,7 +442,8 @@ #interrupt-cells = <1>; device_type = "pci"; compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci"; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 0x42000000 0 0x80000000 0x80000000 0 0x10000000 0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>; @@ -421,6 +459,7 @@ 0xa800 0 0 2 &ipic 20 8 0xa800 0 0 3 &ipic 21 8 0xa800 0 0 4 &ipic 18 8>; + sleep = <&pmc 0x00010000>; /* filled by u-boot */ bus-range = <0 0>; clock-frequency = <0>; |