diff options
Diffstat (limited to 'arch/powerpc/Kconfig')
| -rw-r--r-- | arch/powerpc/Kconfig | 297 |
1 files changed, 186 insertions, 111 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2729c6663d8..80b94b0add1 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -27,15 +27,6 @@ config MMU bool default y -config GENERIC_CMOS_UPDATE - def_bool y - -config GENERIC_TIME_VSYSCALL - def_bool y - -config GENERIC_CLOCKEVENTS - def_bool y - config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 @@ -91,58 +82,88 @@ config GENERIC_HWEIGHT bool default y -config GENERIC_GPIO - bool - help - Generic GPIO API support - -config ARCH_NO_VIRT_TO_BUS - def_bool PPC64 - config PPC bool default y + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select BINFMT_ELF select OF select OF_EARLY_FLATTREE + select OF_RESERVED_MEM select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER + select SYSCTL_EXCEPTION_TRACE select ARCH_WANT_OPTIONAL_GPIOLIB + select VIRT_TO_BUS if !PPC64 select HAVE_IDE select HAVE_IOREMAP_PROT - select HAVE_EFFICIENT_UNALIGNED_ACCESS + select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_LITTLE_ENDIAN select HAVE_KPROBES select HAVE_ARCH_KGDB select HAVE_KRETPROBES select HAVE_ARCH_TRACEHOOK select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG - select USE_GENERIC_SMP_HELPERS if SMP select HAVE_OPROFILE - select HAVE_SYSCALL_WRAPPERS if PPC64 + select HAVE_DEBUG_KMEMLEAK select GENERIC_ATOMIC64 if PPC32 - select HAVE_IRQ_WORK + select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select HAVE_PERF_EVENTS select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64 - select HAVE_GENERIC_HARDIRQS - select HAVE_SPARSE_IRQ - select IRQ_PER_CPU + select ARCH_WANT_IPC_PARSE_VERSION + select SPARSE_IRQ + select IRQ_DOMAIN select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL + select IRQ_FORCED_THREADING select HAVE_RCU_TABLE_FREE if SMP select HAVE_SYSCALL_TRACEPOINTS + select HAVE_BPF_JIT if PPC64 + select HAVE_ARCH_JUMP_LABEL + select ARCH_HAVE_NMI_SAFE_CMPXCHG + select GENERIC_SMP_IDLE_THREAD + select GENERIC_CMOS_UPDATE + select GENERIC_TIME_VSYSCALL_OLD + select GENERIC_CLOCKEVENTS + select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select HAVE_MOD_ARCH_SPECIFIC + select MODULES_USE_ELF_RELA + select CLONE_BACKWARDS + select ARCH_USE_BUILTIN_BSWAP + select OLD_SIGSUSPEND + select OLD_SIGACTION if PPC32 + select HAVE_DEBUG_STACKOVERFLOW + select HAVE_IRQ_EXIT_ON_IRQ_STACK + select ARCH_USE_CMPXCHG_LOCKREF if PPC64 + select HAVE_ARCH_AUDITSYSCALL + select ARCH_SUPPORTS_ATOMIC_RMW + +config GENERIC_CSUM + def_bool CPU_LITTLE_ENDIAN config EARLY_PRINTK bool default y +config PANIC_TIMEOUT + int + default 180 + config COMPAT bool default y if PPC64 select COMPAT_BINFMT_ELF + select ARCH_WANT_OLD_COMPAT_IPC + select COMPAT_OLD_SIGACTION config SYSVIPC_COMPAT bool @@ -199,9 +220,6 @@ config DEFAULT_UIMAGE Used to allow a board to specify it wants a uImage built by default default n -config REDBOOT - bool - config ARCH_HIBERNATION_POSSIBLE bool default y @@ -209,7 +227,8 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ - (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x + (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ + || 44x || 40x config PPC_DCR_NATIVE bool @@ -233,6 +252,9 @@ config PPC_OF_PLATFORM_PCI config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y +config ARCH_SUPPORTS_UPROBES + def_bool y + config PPC_ADV_DEBUG_REGS bool depends on 40x || BOOKE @@ -260,6 +282,10 @@ config PPC_ADV_DEBUG_DAC_RANGE depends on PPC_ADV_DEBUG_REGS && 44x default y +config PPC_EMULATE_SSTEP + bool + default y if KPROBES || UPROBES || XMON || HAVE_HW_BREAKPOINT + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -273,7 +299,6 @@ config HIGHMEM bool "High memory support" depends on PPC32 -source kernel/time/Kconfig source kernel/Kconfig.hz source kernel/Kconfig.preempt source "fs/Kconfig.binfmt" @@ -285,7 +310,7 @@ config HUGETLB_PAGE_SIZE_VARIABLE config MATH_EMULATION bool "Math emulation" - depends on 4xx || 8xx || E200 || PPC_MPC832x || E500 + depends on 4xx || 8xx || PPC_MPC832x || BOOKE ---help--- Some PowerPC chips designed for embedded applications do not have a floating-point unit and therefore do not implement the @@ -294,16 +319,39 @@ config MATH_EMULATION unit, which will allow programs that use floating-point instructions to run. -config 8XX_MINIMAL_FPEMU - bool "Minimal math emulation for 8xx" - depends on 8xx && !MATH_EMULATION - help - Older arch/ppc kernels still emulated a few floating point - instructions such as load and store, even when full math - emulation is disabled. Say "Y" here if you want to preserve - this behavior. + This is also useful to emulate missing (optional) instructions + such as fsqrt on cores that do have an FPU but do not implement + them (such as Freescale BookE). - It is recommended that you build a soft-float userspace instead. +choice + prompt "Math emulation options" + default MATH_EMULATION_FULL + depends on MATH_EMULATION + +config MATH_EMULATION_FULL + bool "Emulate all the floating point instructions" + ---help--- + Select this option will enable the kernel to support to emulate + all the floating point instructions. If your SoC doesn't have + a FPU, you should select this. + +config MATH_EMULATION_HW_UNIMPLEMENTED + bool "Just emulate the FPU unimplemented instructions" + ---help--- + Select this if you know there does have a hardware FPU on your + SoC, but some floating point instructions are not implemented by that. + +endchoice + +config PPC_TRANSACTIONAL_MEM + bool "Transactional Memory support for POWERPC" + depends on PPC_BOOK3S_64 + depends on SMP + select ALTIVEC + select VSX + default n + ---help--- + Support user-mode Transactional Memory on POWERPC. config IOMMU_HELPER def_bool PPC64 @@ -320,7 +368,8 @@ config SWIOTLB config HOTPLUG_CPU bool "Support for enabling/disabling CPUs" - depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) + depends on SMP && (PPC_PSERIES || \ + PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC)) ---help--- Say Y here to be able to disable and re-enable individual CPUs at runtime on SMP machines. @@ -340,9 +389,15 @@ config ARCH_HAS_WALK_MEMORY config ARCH_ENABLE_MEMORY_HOTREMOVE def_bool y +config PPC64_SUPPORTS_MEMORY_FAILURE + bool "Add support for memory hwpoison" + depends on PPC_BOOK3S_64 + default "y" if PPC_POWERNV + select ARCH_SUPPORTS_MEMORY_FAILURE + config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL + bool "kexec system call" + depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -353,36 +408,35 @@ config KEXEC It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made. config CRASH_DUMP bool "Build a kdump crash kernel" - depends on PPC64 || 6xx || FSL_BOOKE - select RELOCATABLE if PPC64 || FSL_BOOKE + depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP) + select RELOCATABLE if (PPC64 && !COMPILE_TEST) || 44x || FSL_BOOKE help Build a kernel suitable for use as a kdump capture kernel. The same kernel binary can be used as production kernel and dump capture kernel. -config PHYP_DUMP - bool "Hypervisor-assisted dump (EXPERIMENTAL)" - depends on PPC_PSERIES && EXPERIMENTAL +config FA_DUMP + bool "Firmware-assisted dump" + depends on PPC64 && PPC_RTAS && CRASH_DUMP && KEXEC help - Hypervisor-assisted dump is meant to be a kdump replacement - offering robustness and speed not possible without system - hypervisor assistance. + A robust mechanism to get reliable kernel crash dump with + assistance from firmware. This approach does not use kexec, + instead firmware assists in booting the kdump kernel + while preserving memory contents. Firmware-assisted dump + is meant to be a kdump replacement offering robustness and + speed not possible without system firmware assistance. If unsure, say "N" -config PPCBUG_NVRAM - bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC - default y if PPC_PREP - config IRQ_ALL_CPUS bool "Distribute interrupts on all CPUs by default" - depends on SMP && !MV64360 + depends on SMP help This option gives the kernel permission to distribute IRQs across multiple CPUs. Saying N here will route all IRQs to the first @@ -400,10 +454,13 @@ config NODES_SHIFT default "4" depends on NEED_MULTIPLE_NODES -config MAX_ACTIVE_REGIONS - int - default "256" if PPC64 - default "32" +config USE_PERCPU_NUMA_NODE_ID + def_bool y + depends on NUMA + +config HAVE_MEMORYLESS_NODES + def_bool y + depends on NUMA config ARCH_SELECT_MEMORY_MODEL def_bool y @@ -422,12 +479,8 @@ config ARCH_SPARSEMEM_DEFAULT def_bool y depends on (SMP && PPC_PSERIES) || PPC_PS3 -config ARCH_POPULATES_NODE_MAP - def_bool y - config SYS_SUPPORTS_HUGETLBFS - def_bool y - depends on PPC_BOOK3S_64 + bool source "mm/Kconfig" @@ -494,6 +547,7 @@ config PPC_16K_PAGES config PPC_64K_PAGES bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64 + depends on !PPC_FSL_BOOK3E select PPC_HAS_HASH_64K if PPC_STD_MMU_64 config PPC_256K_PAGES @@ -556,6 +610,14 @@ config SCHED_SMT when dealing with POWER5 cpus at a cost of slightly increased overhead in some places. If unsure say N here. +config PPC_DENORMALISATION + bool "PowerPC denormalisation exception handling" + depends on PPC_BOOK3S_64 + default "y" if PPC_POWERNV + ---help--- + Add support for handling denormalisation of single precision + values. Useful for bare metal only. If unsure say Y here. + config CMDLINE_BOOL bool "Default bootloader kernel arguments" @@ -569,6 +631,15 @@ config CMDLINE some command-line options at build time by entering them here. In most cases you will need to specify the root device here. +config CMDLINE_FORCE + bool "Always use the default kernel command string" + depends on CMDLINE_BOOL + help + Always use the default kernel command string, even if the boot + loader passes other arguments to the kernel. + This is useful if you cannot or don't want to change the + command-line options your boot loader passes to the kernel. + config EXTRA_TARGETS string "Additional default image types" help @@ -609,20 +680,20 @@ endmenu config ISA_DMA_API bool - default !PPC_ISERIES || PCI + default PCI menu "Bus options" config ISA bool "Support for ISA-bus hardware" - depends on PPC_PREP || PPC_CHRP + depends on PPC_CHRP select PPC_I8259 help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. If you have an Apple machine, say N here; if you - have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If - you have an embedded board, consult your board documentation. + have an IBM RS/6000 or pSeries machine, say Y. If you have an + embedded board, consult your board documentation. config ZONE_DMA bool @@ -707,9 +778,8 @@ config PCI bool "PCI support" if PPC_PCI_CHOICE default y if !40x && !CPM2 && !8xx && !PPC_83xx \ && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON - default PCI_PERMEDIA if !4xx && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx - select ARCH_SUPPORTS_MSI + select GENERIC_PCI_IOMAP help Find out whether your system includes a PCI bus. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -736,29 +806,6 @@ config PCI_8260 select PPC_INDIRECT_PCI default y -config 8260_PCI9 - bool "Enable workaround for MPC826x erratum PCI 9" - depends on PCI_8260 && !8272 - default y - -choice - prompt "IDMA channel for PCI 9 workaround" - depends on 8260_PCI9 - -config 8260_PCI9_IDMA1 - bool "IDMA1" - -config 8260_PCI9_IDMA2 - bool "IDMA2" - -config 8260_PCI9_IDMA3 - bool "IDMA3" - -config 8260_PCI9_IDMA4 - bool "IDMA4" - -endchoice - source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" @@ -772,7 +819,7 @@ config HAS_RAPIDIO default n config RAPIDIO - bool "RapidIO support" + tristate "RapidIO support" depends on HAS_RAPIDIO || PCI help If you say Y here, the kernel will include drivers and @@ -780,7 +827,7 @@ config RAPIDIO config FSL_RIO bool "Freescale Embedded SRIO Controller support" - depends on RAPIDIO && HAS_RAPIDIO + depends on RAPIDIO = y && HAS_RAPIDIO default "n" ---help--- Include support for RapidIO controller on Freescale embedded @@ -790,6 +837,10 @@ source "drivers/rapidio/Kconfig" endmenu +config NONSTATIC_KERNEL + bool + default n + menu "Advanced setup" depends on PPC32 @@ -839,13 +890,32 @@ config LOWMEM_CAM_NUM int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL default 3 +config DYNAMIC_MEMSTART + bool "Enable page aligned dynamic load address for kernel" + depends on ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x) + select NONSTATIC_KERNEL + help + This option enables the kernel to be loaded at any page aligned + physical address. The kernel creates a mapping from KERNELBASE to + the address where the kernel is loaded. The page size here implies + the TLB page size of the mapping for kernel on the particular platform. + Please refer to the init code for finding the TLB page size. + + DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE + kernel image, where the only restriction is the page aligned kernel + load address. When this option is enabled, the compile time physical + address CONFIG_PHYSICAL_START is ignored. + + This option is overridden by CONFIG_RELOCATABLE + config RELOCATABLE - bool "Build a relocatable kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE + bool "Build a relocatable kernel" + depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE) + select NONSTATIC_KERNEL help This builds a kernel image that is capable of running at the - location the kernel is loaded at (some alignment restrictions may - exist). + location the kernel is loaded at, without any alignment restrictions. + This feature is a superset of DYNAMIC_MEMSTART and hence overrides it. One use is for the kexec on panic case where the recovery kernel must live at a different physical address than the primary @@ -855,7 +925,11 @@ config RELOCATABLE it has been loaded at and the compile time physical addresses CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START setting can still be useful to bootwrappers that need to know the - load location of the kernel (eg. u-boot/mkimage). + load address of the kernel (eg. u-boot/mkimage). + +config RELOCATABLE_PPC32 + def_bool y + depends on PPC32 && RELOCATABLE config PAGE_OFFSET_BOOL bool "Set custom page offset address" @@ -885,7 +959,7 @@ config KERNEL_START_BOOL config KERNEL_START hex "Virtual address of kernel base" if KERNEL_START_BOOL default PAGE_OFFSET if PAGE_OFFSET_BOOL - default "0xc2000000" if CRASH_DUMP && !RELOCATABLE + default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL default "0xc0000000" config PHYSICAL_START_BOOL @@ -898,7 +972,7 @@ config PHYSICAL_START_BOOL config PHYSICAL_START hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL - default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE + default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !NONSTATIC_KERNEL default "0x00000000" config PHYSICAL_ALIGN @@ -921,7 +995,7 @@ config TASK_SIZE_BOOL config TASK_SIZE hex "Size of user task space" if TASK_SIZE_BOOL - default "0x80000000" if PPC_PREP || PPC_8xx + default "0x80000000" if PPC_8xx default "0xc0000000" config CONSISTENT_SIZE_BOOL @@ -944,6 +1018,8 @@ endmenu if PPC64 config RELOCATABLE bool "Build a relocatable kernel" + depends on !COMPILE_TEST + select NONSTATIC_KERNEL help This builds a kernel image that is capable of running anywhere in the RMA (real memory area) at any 16k-aligned base address. @@ -955,6 +1031,7 @@ config RELOCATABLE must live at a different physical address than the primary kernel. +# This value must have zeroes in the bottom 60 bits otherwise lots will break config PAGE_OFFSET hex default "0xc000000000000000" @@ -966,6 +1043,9 @@ config PHYSICAL_START default "0x00000000" endif +config ARCH_RANDOM + def_bool n + source "net/Kconfig" source "drivers/Kconfig" @@ -987,11 +1067,6 @@ config KEYS_COMPAT source "crypto/Kconfig" -config PPC_CLOCK - bool - default n - select HAVE_CLK - config PPC_LIB_RHEAP bool |