diff options
Diffstat (limited to 'arch/powerpc/Kconfig')
| -rw-r--r-- | arch/powerpc/Kconfig | 151 |
1 files changed, 89 insertions, 62 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 80821512e9c..80b94b0add1 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -82,16 +82,15 @@ config GENERIC_HWEIGHT bool default y -config GENERIC_GPIO - bool - help - Generic GPIO API support - config PPC bool default y + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select BINFMT_ELF select OF select OF_EARLY_FLATTREE + select OF_RESERVED_MEM select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER @@ -101,7 +100,7 @@ config PPC select VIRT_TO_BUS if !PPC64 select HAVE_IDE select HAVE_IOREMAP_PROT - select HAVE_EFFICIENT_UNALIGNED_ACCESS + select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_LITTLE_ENDIAN select HAVE_KPROBES select HAVE_ARCH_KGDB select HAVE_KRETPROBES @@ -110,16 +109,13 @@ config PPC select HAVE_MEMBLOCK_NODE_MAP select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG - select USE_GENERIC_SMP_HELPERS if SMP select HAVE_OPROFILE select HAVE_DEBUG_KMEMLEAK - select HAVE_SYSCALL_WRAPPERS if PPC64 select GENERIC_ATOMIC64 if PPC32 select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select HAVE_PERF_EVENTS select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64 - select HAVE_GENERIC_HARDIRQS select ARCH_WANT_IPC_PARSE_VERSION select SPARSE_IRQ select IRQ_DOMAIN @@ -135,6 +131,8 @@ config PPC select GENERIC_CMOS_UPDATE select GENERIC_TIME_VSYSCALL_OLD select GENERIC_CLOCKEVENTS + select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HAVE_MOD_ARCH_SPECIFIC @@ -143,11 +141,23 @@ config PPC select ARCH_USE_BUILTIN_BSWAP select OLD_SIGSUSPEND select OLD_SIGACTION if PPC32 + select HAVE_DEBUG_STACKOVERFLOW + select HAVE_IRQ_EXIT_ON_IRQ_STACK + select ARCH_USE_CMPXCHG_LOCKREF if PPC64 + select HAVE_ARCH_AUDITSYSCALL + select ARCH_SUPPORTS_ATOMIC_RMW + +config GENERIC_CSUM + def_bool CPU_LITTLE_ENDIAN config EARLY_PRINTK bool default y +config PANIC_TIMEOUT + int + default 180 + config COMPAT bool default y if PPC64 @@ -210,9 +220,6 @@ config DEFAULT_UIMAGE Used to allow a board to specify it wants a uImage built by default default n -config REDBOOT - bool - config ARCH_HIBERNATION_POSSIBLE bool default y @@ -303,7 +310,7 @@ config HUGETLB_PAGE_SIZE_VARIABLE config MATH_EMULATION bool "Math emulation" - depends on 4xx || 8xx || E200 || PPC_MPC832x || E500 + depends on 4xx || 8xx || PPC_MPC832x || BOOKE ---help--- Some PowerPC chips designed for embedded applications do not have a floating-point unit and therefore do not implement the @@ -312,25 +319,40 @@ config MATH_EMULATION unit, which will allow programs that use floating-point instructions to run. + This is also useful to emulate missing (optional) instructions + such as fsqrt on cores that do have an FPU but do not implement + them (such as Freescale BookE). + +choice + prompt "Math emulation options" + default MATH_EMULATION_FULL + depends on MATH_EMULATION + +config MATH_EMULATION_FULL + bool "Emulate all the floating point instructions" + ---help--- + Select this option will enable the kernel to support to emulate + all the floating point instructions. If your SoC doesn't have + a FPU, you should select this. + +config MATH_EMULATION_HW_UNIMPLEMENTED + bool "Just emulate the FPU unimplemented instructions" + ---help--- + Select this if you know there does have a hardware FPU on your + SoC, but some floating point instructions are not implemented by that. + +endchoice + config PPC_TRANSACTIONAL_MEM bool "Transactional Memory support for POWERPC" depends on PPC_BOOK3S_64 depends on SMP + select ALTIVEC + select VSX default n ---help--- Support user-mode Transactional Memory on POWERPC. -config 8XX_MINIMAL_FPEMU - bool "Minimal math emulation for 8xx" - depends on 8xx && !MATH_EMULATION - help - Older arch/ppc kernels still emulated a few floating point - instructions such as load and store, even when full math - emulation is disabled. Say "Y" here if you want to preserve - this behavior. - - It is recommended that you build a soft-float userspace instead. - config IOMMU_HELPER def_bool PPC64 @@ -346,7 +368,7 @@ config SWIOTLB config HOTPLUG_CPU bool "Support for enabling/disabling CPUs" - depends on SMP && HOTPLUG && (PPC_PSERIES || \ + depends on SMP && (PPC_PSERIES || \ PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC)) ---help--- Say Y here to be able to disable and re-enable individual @@ -367,6 +389,12 @@ config ARCH_HAS_WALK_MEMORY config ARCH_ENABLE_MEMORY_HOTREMOVE def_bool y +config PPC64_SUPPORTS_MEMORY_FAILURE + bool "Add support for memory hwpoison" + depends on PPC_BOOK3S_64 + default "y" if PPC_POWERNV + select ARCH_SUPPORTS_MEMORY_FAILURE + config KEXEC bool "kexec system call" depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) @@ -380,15 +408,14 @@ config KEXEC It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made. config CRASH_DUMP bool "Build a kdump crash kernel" depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP) - select RELOCATABLE if PPC64 || 44x - select DYNAMIC_MEMSTART if FSL_BOOKE + select RELOCATABLE if (PPC64 && !COMPILE_TEST) || 44x || FSL_BOOKE help Build a kernel suitable for use as a kdump capture kernel. The same kernel binary can be used as production kernel and dump @@ -396,7 +423,7 @@ config CRASH_DUMP config FA_DUMP bool "Firmware-assisted dump" - depends on PPC64 && PPC_RTAS && CRASH_DUMP + depends on PPC64 && PPC_RTAS && CRASH_DUMP && KEXEC help A robust mechanism to get reliable kernel crash dump with assistance from firmware. This approach does not use kexec, @@ -409,7 +436,7 @@ config FA_DUMP config IRQ_ALL_CPUS bool "Distribute interrupts on all CPUs by default" - depends on SMP && !MV64360 + depends on SMP help This option gives the kernel permission to distribute IRQs across multiple CPUs. Saying N here will route all IRQs to the first @@ -427,10 +454,13 @@ config NODES_SHIFT default "4" depends on NEED_MULTIPLE_NODES -config MAX_ACTIVE_REGIONS - int - default "256" if PPC64 - default "32" +config USE_PERCPU_NUMA_NODE_ID + def_bool y + depends on NUMA + +config HAVE_MEMORYLESS_NODES + def_bool y + depends on NUMA config ARCH_SELECT_MEMORY_MODEL def_bool y @@ -517,6 +547,7 @@ config PPC_16K_PAGES config PPC_64K_PAGES bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64 + depends on !PPC_FSL_BOOK3E select PPC_HAS_HASH_64K if PPC_STD_MMU_64 config PPC_256K_PAGES @@ -582,7 +613,7 @@ config SCHED_SMT config PPC_DENORMALISATION bool "PowerPC denormalisation exception handling" depends on PPC_BOOK3S_64 - default "n" + default "y" if PPC_POWERNV ---help--- Add support for handling denormalisation of single precision values. Useful for bare metal only. If unsure say Y here. @@ -600,6 +631,15 @@ config CMDLINE some command-line options at build time by entering them here. In most cases you will need to specify the root device here. +config CMDLINE_FORCE + bool "Always use the default kernel command string" + depends on CMDLINE_BOOL + help + Always use the default kernel command string, even if the boot + loader passes other arguments to the kernel. + This is useful if you cannot or don't want to change the + command-line options your boot loader passes to the kernel. + config EXTRA_TARGETS string "Additional default image types" help @@ -646,14 +686,14 @@ menu "Bus options" config ISA bool "Support for ISA-bus hardware" - depends on PPC_PREP || PPC_CHRP + depends on PPC_CHRP select PPC_I8259 help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. If you have an Apple machine, say N here; if you - have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If - you have an embedded board, consult your board documentation. + have an IBM RS/6000 or pSeries machine, say Y. If you have an + embedded board, consult your board documentation. config ZONE_DMA bool @@ -684,8 +724,6 @@ config SBUS config FSL_SOC bool - select HAVE_CAN_FLEXCAN if NET && CAN - select PPC_CLOCK config FSL_PCI bool @@ -720,10 +758,6 @@ config FSL_LBC controller. Also contains some common code used by drivers for specific local bus peripherals. -config FSL_IFC - bool - depends on FSL_SOC - config FSL_GTM bool depends on PPC_83xx || QUICC_ENGINE || CPM2 @@ -744,9 +778,7 @@ config PCI bool "PCI support" if PPC_PCI_CHOICE default y if !40x && !CPM2 && !8xx && !PPC_83xx \ && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON - default PCI_PERMEDIA if !4xx && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx - select ARCH_SUPPORTS_MSI select GENERIC_PCI_IOMAP help Find out whether your system includes a PCI bus. PCI is the name of @@ -774,11 +806,6 @@ config PCI_8260 select PPC_INDIRECT_PCI default y -config 8260_PCI9 - bool "Enable workaround for MPC826x erratum PCI 9" - depends on PCI_8260 && !8272 - default y - source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" @@ -792,7 +819,7 @@ config HAS_RAPIDIO default n config RAPIDIO - bool "RapidIO support" + tristate "RapidIO support" depends on HAS_RAPIDIO || PCI help If you say Y here, the kernel will include drivers and @@ -800,7 +827,7 @@ config RAPIDIO config FSL_RIO bool "Freescale Embedded SRIO Controller support" - depends on RAPIDIO && HAS_RAPIDIO + depends on RAPIDIO = y && HAS_RAPIDIO default "n" ---help--- Include support for RapidIO controller on Freescale embedded @@ -883,7 +910,7 @@ config DYNAMIC_MEMSTART config RELOCATABLE bool "Build a relocatable kernel" - depends on ADVANCED_OPTIONS && FLATMEM && 44x + depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE) select NONSTATIC_KERNEL help This builds a kernel image that is capable of running at the @@ -968,7 +995,7 @@ config TASK_SIZE_BOOL config TASK_SIZE hex "Size of user task space" if TASK_SIZE_BOOL - default "0x80000000" if PPC_PREP || PPC_8xx + default "0x80000000" if PPC_8xx default "0xc0000000" config CONSISTENT_SIZE_BOOL @@ -991,6 +1018,7 @@ endmenu if PPC64 config RELOCATABLE bool "Build a relocatable kernel" + depends on !COMPILE_TEST select NONSTATIC_KERNEL help This builds a kernel image that is capable of running anywhere @@ -1003,6 +1031,7 @@ config RELOCATABLE must live at a different physical address than the primary kernel. +# This value must have zeroes in the bottom 60 bits otherwise lots will break config PAGE_OFFSET hex default "0xc000000000000000" @@ -1014,6 +1043,9 @@ config PHYSICAL_START default "0x00000000" endif +config ARCH_RANDOM + def_bool n + source "net/Kconfig" source "drivers/Kconfig" @@ -1035,11 +1067,6 @@ config KEYS_COMPAT source "crypto/Kconfig" -config PPC_CLOCK - bool - default n - select HAVE_CLK - config PPC_LIB_RHEAP bool |