aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/txx9/rbtx4938
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/txx9/rbtx4938')
-rw-r--r--arch/mips/txx9/rbtx4938/Makefile4
-rw-r--r--arch/mips/txx9/rbtx4938/irq.c172
-rw-r--r--arch/mips/txx9/rbtx4938/prom.c4
-rw-r--r--arch/mips/txx9/rbtx4938/setup.c190
-rw-r--r--arch/mips/txx9/rbtx4938/spi_eeprom.c99
5 files changed, 156 insertions, 313 deletions
diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile
index 9dcc52ae5b9..60b24c8f7e6 100644
--- a/arch/mips/txx9/rbtx4938/Makefile
+++ b/arch/mips/txx9/rbtx4938/Makefile
@@ -1,3 +1 @@
-obj-y += prom.o setup.o irq.o spi_eeprom.o
-
-EXTRA_CFLAGS += -Werror
+obj-y += prom.o setup.o irq.o
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index 3971a061657..58cd7a9272c 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -11,126 +11,102 @@
*/
/*
-IRQ Device
-
-16 TX4938-CP0/00 Software 0
-17 TX4938-CP0/01 Software 1
-18 TX4938-CP0/02 Cascade TX4938-CP0
-19 TX4938-CP0/03 Multiplexed -- do not use
-20 TX4938-CP0/04 Multiplexed -- do not use
-21 TX4938-CP0/05 Multiplexed -- do not use
-22 TX4938-CP0/06 Multiplexed -- do not use
-23 TX4938-CP0/07 CPU TIMER
-
-24 TX4938-PIC/00
-25 TX4938-PIC/01
-26 TX4938-PIC/02 Cascade RBTX4938-IOC
-27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28 TX4938-PIC/04
-29 TX4938-PIC/05 TX4938 ETH1
-30 TX4938-PIC/06 TX4938 ETH0
-31 TX4938-PIC/07
-32 TX4938-PIC/08 TX4938 SIO 0
-33 TX4938-PIC/09 TX4938 SIO 1
-34 TX4938-PIC/10 TX4938 DMA0
-35 TX4938-PIC/11 TX4938 DMA1
-36 TX4938-PIC/12 TX4938 DMA2
-37 TX4938-PIC/13 TX4938 DMA3
-38 TX4938-PIC/14
-39 TX4938-PIC/15
-40 TX4938-PIC/16 TX4938 PCIC
-41 TX4938-PIC/17 TX4938 TMR0
-42 TX4938-PIC/18 TX4938 TMR1
-43 TX4938-PIC/19 TX4938 TMR2
-44 TX4938-PIC/20
-45 TX4938-PIC/21
-46 TX4938-PIC/22 TX4938 PCIERR
-47 TX4938-PIC/23
-48 TX4938-PIC/24
-49 TX4938-PIC/25
-50 TX4938-PIC/26
-51 TX4938-PIC/27
-52 TX4938-PIC/28
-53 TX4938-PIC/29
-54 TX4938-PIC/30
-55 TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <asm/mipsregs.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/rbtx4938.h>
-static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
-static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
-
-#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
-static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
- .name = TOSHIBA_RBTX4938_IOC_NAME,
- .ack = toshiba_rbtx4938_irq_ioc_disable,
- .mask = toshiba_rbtx4938_irq_ioc_disable,
- .mask_ack = toshiba_rbtx4938_irq_ioc_disable,
- .unmask = toshiba_rbtx4938_irq_ioc_enable,
-};
-
static int toshiba_rbtx4938_irq_nested(int sw_irq)
{
u8 level3;
level3 = readb(rbtx4938_imstat_addr);
- if (level3)
- /* must use fls so onboard ATA has priority */
- sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1;
- return sw_irq;
-}
-
-/**********************************************************************************/
-/* Functions for ioc */
-/**********************************************************************************/
-static void __init
-toshiba_rbtx4938_irq_ioc_init(void)
-{
- int i;
-
- for (i = RBTX4938_IRQ_IOC;
- i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++)
- set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
- handle_level_irq);
-
- set_irq_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq);
+ if (unlikely(!level3))
+ return -1;
+ /* must use fls so onboard ATA has priority */
+ return RBTX4938_IRQ_IOC + __fls8(level3);
}
-static void
-toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
+static void toshiba_rbtx4938_irq_ioc_enable(struct irq_data *d)
{
unsigned char v;
v = readb(rbtx4938_imask_addr);
- v |= (1 << (irq - RBTX4938_IRQ_IOC));
+ v |= (1 << (d->irq - RBTX4938_IRQ_IOC));
writeb(v, rbtx4938_imask_addr);
mmiowb();
}
-static void
-toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
+static void toshiba_rbtx4938_irq_ioc_disable(struct irq_data *d)
{
unsigned char v;
v = readb(rbtx4938_imask_addr);
- v &= ~(1 << (irq - RBTX4938_IRQ_IOC));
+ v &= ~(1 << (d->irq - RBTX4938_IRQ_IOC));
writeb(v, rbtx4938_imask_addr);
mmiowb();
}
+#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
+static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
+ .name = TOSHIBA_RBTX4938_IOC_NAME,
+ .irq_mask = toshiba_rbtx4938_irq_ioc_disable,
+ .irq_unmask = toshiba_rbtx4938_irq_ioc_enable,
+};
+
static int rbtx4938_irq_dispatch(int pending)
{
int irq;
@@ -150,6 +126,18 @@ static int rbtx4938_irq_dispatch(int pending)
return irq;
}
+static void __init toshiba_rbtx4938_irq_ioc_init(void)
+{
+ int i;
+
+ for (i = RBTX4938_IRQ_IOC;
+ i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++)
+ irq_set_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
+ handle_level_irq);
+
+ irq_set_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq);
+}
+
void __init rbtx4938_irq_setup(void)
{
txx9_irq_dispatch = rbtx4938_irq_dispatch;
@@ -165,5 +153,5 @@ void __init rbtx4938_irq_setup(void)
tx4938_irq_init();
toshiba_rbtx4938_irq_ioc_init();
/* Onboard 10M Ether: High Active */
- set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH);
+ irq_set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH);
}
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index ee189519ce5..bcb469247e8 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -18,8 +18,6 @@
void __init rbtx4938_prom_init(void)
{
-#ifndef CONFIG_TX4938_NAND_BOOT
- prom_init_cmdline();
-#endif
add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+ txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
}
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 6c2b99bb8af..c9afd05020e 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -13,11 +13,9 @@
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/mtd/physmap.h>
#include <asm/reboot.h>
#include <asm/io.h>
@@ -28,33 +26,14 @@
#include <asm/txx9/spi.h>
#include <asm/txx9pio.h>
-static void rbtx4938_machine_halt(void)
-{
- printk(KERN_NOTICE "System Halted\n");
- local_irq_disable();
-
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-}
-
-static void rbtx4938_machine_power_off(void)
-{
- rbtx4938_machine_halt();
- /* no return */
-}
-
static void rbtx4938_machine_restart(char *command)
{
local_irq_disable();
-
- printk("Rebooting...");
writeb(1, rbtx4938_softresetlock_addr);
writeb(1, rbtx4938_sfvol_addr);
writeb(1, rbtx4938_softreset_addr);
- while(1)
- ;
+ /* fallback */
+ (*_machine_halt)();
}
static void __init rbtx4938_pci_setup(void)
@@ -121,16 +100,18 @@ static void __init rbtx4938_pci_setup(void)
register_pci_controller(c);
tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
}
+ tx4938_setup_pcierr_irq();
#endif /* CONFIG_PCI */
}
/* SPI support */
/* chip select for SPI devices */
-#define SEEPROM1_CS 7 /* PIO7 */
-#define SEEPROM2_CS 0 /* IOC */
-#define SEEPROM3_CS 1 /* IOC */
-#define SRTC_CS 2 /* IOC */
+#define SEEPROM1_CS 7 /* PIO7 */
+#define SEEPROM2_CS 0 /* IOC */
+#define SEEPROM3_CS 1 /* IOC */
+#define SRTC_CS 2 /* IOC */
+#define SPI_BUSNO 0
static int __init rbtx4938_ethaddr_init(void)
{
@@ -140,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void)
int i;
/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
- if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+ if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) {
printk(KERN_ERR "seeprom: read error.\n");
return -ENODEV;
} else {
@@ -151,19 +132,7 @@ static int __init rbtx4938_ethaddr_init(void)
if (sum)
printk(KERN_WARNING "seeprom: bad checksum.\n");
}
- for (i = 0; i < 2; i++) {
- unsigned int id =
- TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
- struct platform_device *pdev;
- if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
- (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
- continue;
- pdev = platform_device_alloc("tc35815-mac", id);
- if (!pdev ||
- platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
- platform_device_add(pdev))
- platform_device_put(pdev);
- }
+ tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
#endif /* CONFIG_PCI */
return 0;
}
@@ -184,7 +153,6 @@ static void __init rbtx4938_time_init(void)
static void __init rbtx4938_mem_setup(void)
{
unsigned long long pcfg;
- char *argptr;
if (txx9_master_clock == 0)
txx9_master_clock = 25000000; /* 25MHz */
@@ -193,49 +161,36 @@ static void __init rbtx4938_mem_setup(void)
#ifdef CONFIG_PCI
txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+ txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(RBTX4938_ETHER_BASE);
#endif
- tx4938_setup_serial();
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (strstr(argptr, "console=") == NULL) {
- strcat(argptr, " console=ttyS0,38400");
- }
-#endif
+ tx4938_sio_init(7372800, 0);
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
- printk("PIOSEL: disabling both ata and nand selection\n");
- local_irq_disable();
+ pr_info("PIOSEL: disabling both ATA and NAND selection\n");
txx9_clear64(&tx4938_ccfgptr->pcfg,
TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
- printk("PIOSEL: enabling nand selection\n");
+ pr_info("PIOSEL: enabling NAND selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
- printk("PIOSEL: enabling ata selection\n");
+ pr_info("PIOSEL: enabling ATA selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
#endif
-#ifdef CONFIG_IP_PNP
- argptr = prom_getcmdline();
- if (strstr(argptr, "ip=") == NULL) {
- strcat(argptr, " ip=any");
- }
-#endif
-
-
-#ifdef CONFIG_FB
- {
- conswitchp = &dummy_con;
- }
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP
+ pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+ pr_info("PIOSEL: NAND %s, ATA %s\n",
+ (pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled",
+ (pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled");
#endif
rbtx4938_spi_setup();
@@ -258,11 +213,9 @@ static void __init rbtx4938_mem_setup(void)
rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
- printk("request resource for fpga failed\n");
+ printk(KERN_ERR "request resource for fpga failed\n");
_machine_restart = rbtx4938_machine_restart;
- _machine_halt = rbtx4938_machine_halt;
- pm_power_off = rbtx4938_machine_power_off;
writeb(0xff, rbtx4938_led_addr);
printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
@@ -270,7 +223,7 @@ static void __init rbtx4938_mem_setup(void)
readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
}
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
{
struct resource res[] = {
{
@@ -282,10 +235,7 @@ static int __init rbtx4938_ne_init(void)
.flags = IORESOURCE_IRQ,
}
};
- struct platform_device *dev =
- platform_device_register_simple("ne", -1,
- res, ARRAY_SIZE(res));
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
@@ -321,24 +271,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = {
.ngpio = 3,
};
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
- struct resource res[] = {
- {
- .start = base,
- .end = base + 0x20 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- platform_device_register_simple("spi_txx9", 0,
- res, ARRAY_SIZE(res));
-}
-
static int __init rbtx4938_spi_init(void)
{
struct spi_board_info srtc_info = {
@@ -350,9 +282,9 @@ static int __init rbtx4938_spi_init(void)
.mode = SPI_MODE_1 | SPI_CS_HIGH,
};
spi_register_board_info(&srtc_info, 1);
- spi_eeprom_register(SEEPROM1_CS);
- spi_eeprom_register(16 + SEEPROM2_CS);
- spi_eeprom_register(16 + SEEPROM3_CS);
+ spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128);
+ spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128);
+ spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128);
gpio_request(16 + SRTC_CS, "rtc-rs5c348");
gpio_direction_output(16 + SRTC_CS, 0);
gpio_request(SEEPROM1_CS, "seeprom1");
@@ -361,41 +293,67 @@ static int __init rbtx4938_spi_init(void)
gpio_direction_output(16 + SEEPROM2_CS, 1);
gpio_request(16 + SEEPROM3_CS, "seeprom3");
gpio_direction_output(16 + SEEPROM3_CS, 1);
- txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+ tx4938_spi_init(SPI_BUSNO);
return 0;
}
-static void __init rbtx4938_arch_init(void)
-{
- gpiochip_add(&rbtx4938_spi_gpio_chip);
- rbtx4938_pci_setup();
- rbtx4938_spi_init();
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
+static void __init rbtx4938_mtd_init(void)
{
- struct resource res = {
- .start = base,
- .end = base + 0x100 - 1,
- .flags = IORESOURCE_MEM,
+ struct physmap_flash_data pdata = {
+ .width = 4,
};
- struct platform_device *dev =
- platform_device_register_simple("txx9wdt", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+
+ switch (readb(rbtx4938_bdipsw_addr) & 7) {
+ case 0:
+ /* Boot */
+ txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata);
+ /* System */
+ txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+ break;
+ case 1:
+ /* System */
+ txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+ /* Boot */
+ txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata);
+ break;
+ case 2:
+ /* Ext */
+ txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+ /* System */
+ txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+ /* Boot */
+ txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata);
+ break;
+ case 3:
+ /* Boot */
+ txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata);
+ /* System */
+ txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata);
+ break;
+ }
}
-static int __init rbtx4938_wdt_init(void)
+static void __init rbtx4938_arch_init(void)
{
- return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+ gpiochip_add(&rbtx4938_spi_gpio_chip);
+ rbtx4938_pci_setup();
+ rbtx4938_spi_init();
}
static void __init rbtx4938_device_init(void)
{
rbtx4938_ethaddr_init();
rbtx4938_ne_init();
- rbtx4938_wdt_init();
+ tx4938_wdt_init();
+ rbtx4938_mtd_init();
+ /* TC58DVM82A1FT: tDH=10ns, tWP=tRP=tREADID=35ns */
+ tx4938_ndfmc_init(10, 35);
+ tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
+ tx4938_dmac_init(0, 2);
+ tx4938_aclc_init();
+ platform_device_register_simple("txx9aclc-generic", -1, NULL, 0);
+ tx4938_sramc_init();
+ txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
}
struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c
deleted file mode 100644
index a7ea8b041c1..00000000000
--- a/arch/mips/txx9/rbtx4938/spi_eeprom.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * spi_eeprom.c
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <asm/txx9/spi.h>
-
-#define AT250X0_PAGE_SIZE 8
-
-/* register board information for at25 driver */
-int __init spi_eeprom_register(int chipid)
-{
- static struct spi_eeprom eeprom = {
- .name = "at250x0",
- .byte_len = 128,
- .page_size = AT250X0_PAGE_SIZE,
- .flags = EE_ADDR1,
- };
- struct spi_board_info info = {
- .modalias = "at25",
- .max_speed_hz = 1500000, /* 1.5Mbps */
- .bus_num = 0,
- .chip_select = chipid,
- .platform_data = &eeprom,
- /* Mode 0: High-Active, Sample-Then-Shift */
- };
-
- return spi_register_board_info(&info, 1);
-}
-
-/* simple temporary spi driver to provide early access to seeprom. */
-
-static struct read_param {
- int chipid;
- int address;
- unsigned char *buf;
- int len;
-} *read_param;
-
-static int __init early_seeprom_probe(struct spi_device *spi)
-{
- int stat = 0;
- u8 cmd[2];
- int len = read_param->len;
- char *buf = read_param->buf;
- int address = read_param->address;
-
- dev_info(&spi->dev, "spiclk %u KHz.\n",
- (spi->max_speed_hz + 500) / 1000);
- if (read_param->chipid != spi->chip_select)
- return -ENODEV;
- while (len > 0) {
- /* spi_write_then_read can only work with small chunk */
- int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE;
- cmd[0] = 0x03; /* AT25_READ */
- cmd[1] = address;
- stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c);
- buf += c;
- len -= c;
- address += c;
- }
- return stat;
-}
-
-static struct spi_driver early_seeprom_driver __initdata = {
- .driver = {
- .name = "at25",
- .owner = THIS_MODULE,
- },
- .probe = early_seeprom_probe,
-};
-
-int __init spi_eeprom_read(int chipid, int address,
- unsigned char *buf, int len)
-{
- int ret;
- struct read_param param = {
- .chipid = chipid,
- .address = address,
- .buf = buf,
- .len = len
- };
-
- read_param = &param;
- ret = spi_register_driver(&early_seeprom_driver);
- if (!ret)
- spi_unregister_driver(&early_seeprom_driver);
- return ret;
-}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-18 06:26:38 +0000