aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/sni
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sni')
-rw-r--r--arch/mips/sni/Makefile4
-rw-r--r--arch/mips/sni/Platform11
-rw-r--r--arch/mips/sni/a20r.c126
-rw-r--r--arch/mips/sni/ds1216.c81
-rw-r--r--arch/mips/sni/eisa.c50
-rw-r--r--arch/mips/sni/irq.c22
-rw-r--r--arch/mips/sni/pcimt.c91
-rw-r--r--arch/mips/sni/pcimt_scache.c37
-rw-r--r--arch/mips/sni/pcit.c114
-rw-r--r--arch/mips/sni/reset.c7
-rw-r--r--arch/mips/sni/rm200.c408
-rw-r--r--arch/mips/sni/setup.c197
-rw-r--r--arch/mips/sni/sniprom.c247
-rw-r--r--arch/mips/sni/time.c140
14 files changed, 904 insertions, 631 deletions
diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile
index e5777b7e2bc..9d3bad3200c 100644
--- a/arch/mips/sni/Makefile
+++ b/arch/mips/sni/Makefile
@@ -2,5 +2,5 @@
# Makefile for the SNI specific part of the kernel
#
-obj-y += irq.o reset.o setup.o ds1216.o a20r.o rm200.o pcimt.o pcit.o time.o
-obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o
+obj-y += irq.o reset.o setup.o a20r.o rm200.o pcimt.o pcit.o time.o
+obj-$(CONFIG_EISA) += eisa.o
diff --git a/arch/mips/sni/Platform b/arch/mips/sni/Platform
new file mode 100644
index 00000000000..2644a9d63c0
--- /dev/null
+++ b/arch/mips/sni/Platform
@@ -0,0 +1,11 @@
+#
+# SNI RM
+#
+platform-$(CONFIG_SNI_RM) += sni/
+cflags-$(CONFIG_SNI_RM) += -I$(srctree)/arch/mips/include/asm/mach-rm
+ifdef CONFIG_CPU_LITTLE_ENDIAN
+load-$(CONFIG_SNI_RM) += 0xffffffff80600000
+else
+load-$(CONFIG_SNI_RM) += 0xffffffff80030000
+endif
+all-$(CONFIG_SNI_RM) := $(COMPRESSION_FNAME).ecoff
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index 31ab80f1bef..f9407e17047 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -10,12 +10,12 @@
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <asm/sni.h>
#include <asm/time.h>
-#include <asm/ds1216.h>
#define PORT(_base,_irq) \
{ \
@@ -40,20 +40,34 @@ static struct platform_device a20r_serial8250_device = {
},
};
+static struct resource a20r_ds1216_rsrc[] = {
+ {
+ .start = 0x1c081ffc,
+ .end = 0x1c081fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device a20r_ds1216_device = {
+ .name = "rtc-ds1216",
+ .num_resources = ARRAY_SIZE(a20r_ds1216_rsrc),
+ .resource = a20r_ds1216_rsrc
+};
+
static struct resource snirm_82596_rsrc[] = {
{
- .start = 0xb8000000,
- .end = 0xb8000004,
+ .start = 0x18000000,
+ .end = 0x18000004,
.flags = IORESOURCE_MEM
},
{
- .start = 0xb8010000,
- .end = 0xb8010004,
+ .start = 0x18010000,
+ .end = 0x18010004,
.flags = IORESOURCE_MEM
},
{
- .start = 0xbff00000,
- .end = 0xbff00020,
+ .start = 0x1ff00000,
+ .end = 0x1ff00020,
.flags = IORESOURCE_MEM
},
{
@@ -62,20 +76,20 @@ static struct resource snirm_82596_rsrc[] = {
.flags = IORESOURCE_IRQ
},
{
- .flags = 0x01 /* 16bit mpu port access */
+ .flags = 0x01 /* 16bit mpu port access */
}
};
static struct platform_device snirm_82596_pdev = {
- .name = "snirm_82596",
- .num_resources = ARRAY_SIZE(snirm_82596_rsrc),
- .resource = snirm_82596_rsrc
+ .name = "snirm_82596",
+ .num_resources = ARRAY_SIZE(snirm_82596_rsrc),
+ .resource = snirm_82596_rsrc
};
static struct resource snirm_53c710_rsrc[] = {
{
- .start = 0xb9000000,
- .end = 0xb90fffff,
+ .start = 0x19000000,
+ .end = 0x190fffff,
.flags = IORESOURCE_MEM
},
{
@@ -86,15 +100,15 @@ static struct resource snirm_53c710_rsrc[] = {
};
static struct platform_device snirm_53c710_pdev = {
- .name = "snirm_53c710",
- .num_resources = ARRAY_SIZE(snirm_53c710_rsrc),
- .resource = snirm_53c710_rsrc
+ .name = "snirm_53c710",
+ .num_resources = ARRAY_SIZE(snirm_53c710_rsrc),
+ .resource = snirm_53c710_rsrc
};
static struct resource sc26xx_rsrc[] = {
{
- .start = 0xbc070000,
- .end = 0xbc0700ff,
+ .start = 0x1c070000,
+ .end = 0x1c0700ff,
.flags = IORESOURCE_MEM
},
{
@@ -104,17 +118,36 @@ static struct resource sc26xx_rsrc[] = {
}
};
+#include <linux/platform_data/serial-sccnxp.h>
+
+static struct sccnxp_pdata sccnxp_data = {
+ .reg_shift = 2,
+ .mctrl_cfg[0] = MCTRL_SIG(DTR_OP, LINE_OP7) |
+ MCTRL_SIG(RTS_OP, LINE_OP3) |
+ MCTRL_SIG(DSR_IP, LINE_IP5) |
+ MCTRL_SIG(DCD_IP, LINE_IP6),
+ .mctrl_cfg[1] = MCTRL_SIG(DTR_OP, LINE_OP2) |
+ MCTRL_SIG(RTS_OP, LINE_OP1) |
+ MCTRL_SIG(DSR_IP, LINE_IP0) |
+ MCTRL_SIG(CTS_IP, LINE_IP1) |
+ MCTRL_SIG(DCD_IP, LINE_IP2) |
+ MCTRL_SIG(RNG_IP, LINE_IP3),
+};
+
static struct platform_device sc26xx_pdev = {
- .name = "SC26xx",
- .num_resources = ARRAY_SIZE(sc26xx_rsrc),
- .resource = sc26xx_rsrc
+ .name = "sc2681",
+ .resource = sc26xx_rsrc,
+ .num_resources = ARRAY_SIZE(sc26xx_rsrc),
+ .dev = {
+ .platform_data = &sccnxp_data,
+ },
};
static u32 a20r_ack_hwint(void)
{
u32 status = read_c0_status();
- write_c0_status (status | 0x00010000);
+ write_c0_status(status | 0x00010000);
asm volatile(
" .set push \n"
" .set noat \n"
@@ -137,7 +170,7 @@ static u32 a20r_ack_hwint(void)
" addiu %1, -1 \n"
" sw $1, 0(%0) \n"
" sync \n"
- ".set pop \n"
+ ".set pop \n"
:
: "Jr" (PCIMT_UCONF), "Jr" (0xbc000000));
write_c0_status(status);
@@ -145,33 +178,22 @@ static u32 a20r_ack_hwint(void)
return status;
}
-static inline void unmask_a20r_irq(unsigned int irq)
+static inline void unmask_a20r_irq(struct irq_data *d)
{
- set_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
+ set_c0_status(0x100 << (d->irq - SNI_A20R_IRQ_BASE));
irq_enable_hazard();
}
-static inline void mask_a20r_irq(unsigned int irq)
+static inline void mask_a20r_irq(struct irq_data *d)
{
- clear_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
+ clear_c0_status(0x100 << (d->irq - SNI_A20R_IRQ_BASE));
irq_disable_hazard();
}
-static void end_a20r_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
- a20r_ack_hwint();
- unmask_a20r_irq(irq);
- }
-}
-
static struct irq_chip a20r_irq_type = {
- .typename = "A20R",
- .ack = mask_a20r_irq,
- .mask = mask_a20r_irq,
- .mask_ack = mask_a20r_irq,
- .unmask = unmask_a20r_irq,
- .end = end_a20r_irq,
+ .name = "A20R",
+ .irq_mask = mask_a20r_irq,
+ .irq_unmask = unmask_a20r_irq,
};
/*
@@ -182,7 +204,7 @@ static void a20r_hwint(void)
u32 cause, status;
int irq;
- clear_c0_status (IE_IRQ0);
+ clear_c0_status(IE_IRQ0);
status = a20r_ack_hwint();
cause = read_c0_cause();
@@ -197,16 +219,15 @@ void __init sni_a20r_irq_init(void)
int i;
for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++)
- set_irq_chip(i, &a20r_irq_type);
+ irq_set_chip_and_handler(i, &a20r_irq_type, handle_level_irq);
sni_hwint = a20r_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
- setup_irq (SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
+ setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
}
void sni_a20r_init(void)
{
- ds1216_base = (volatile unsigned char *) SNI_DS1216_A20R_BASE;
- rtc_mips_get_time = ds1216_get_cmos_time;
+ /* FIXME, remove if not needed */
}
static int __init snirm_a20r_setup_devinit(void)
@@ -214,13 +235,14 @@ static int __init snirm_a20r_setup_devinit(void)
switch (sni_brd_type) {
case SNI_BRD_TOWER_OASIC:
case SNI_BRD_MINITOWER:
- platform_device_register(&snirm_82596_pdev);
- platform_device_register(&snirm_53c710_pdev);
- platform_device_register(&sc26xx_pdev);
- platform_device_register(&a20r_serial8250_device);
- break;
+ platform_device_register(&snirm_82596_pdev);
+ platform_device_register(&snirm_53c710_pdev);
+ platform_device_register(&sc26xx_pdev);
+ platform_device_register(&a20r_serial8250_device);
+ platform_device_register(&a20r_ds1216_device);
+ sni_eisa_root_init();
+ break;
}
-
return 0;
}
diff --git a/arch/mips/sni/ds1216.c b/arch/mips/sni/ds1216.c
deleted file mode 100644
index 1d92732c14f..00000000000
--- a/arch/mips/sni/ds1216.c
+++ /dev/null
@@ -1,81 +0,0 @@
-
-#include <linux/bcd.h>
-#include <linux/time.h>
-
-#include <asm/ds1216.h>
-
-volatile unsigned char *ds1216_base;
-
-/*
- * Read the 64 bit we'd like to have - It a series
- * of 64 bits showing up in the LSB of the base register.
- *
- */
-static unsigned char *ds1216_read(void)
-{
- static unsigned char rdbuf[8];
- unsigned char c;
- int i, j;
-
- for (i = 0; i < 8; i++) {
- c = 0x0;
- for (j = 0; j < 8; j++) {
- c |= (*ds1216_base & 0x1) << j;
- }
- rdbuf[i] = c;
- }
-
- return rdbuf;
-}
-
-static void ds1216_switch_ds_to_clock(void)
-{
- unsigned char magic[] = {
- 0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c
- };
- int i,j,c;
-
- /* Reset magic pointer */
- c = *ds1216_base;
-
- /* Write 64 bit magic to DS1216 */
- for (i = 0; i < 8; i++) {
- c = magic[i];
- for (j = 0; j < 8; j++) {
- *ds1216_base = c;
- c = c >> 1;
- }
- }
-}
-
-unsigned long ds1216_get_cmos_time(void)
-{
- unsigned char *rdbuf;
- unsigned int year, month, date, hour, min, sec;
-
- ds1216_switch_ds_to_clock();
- rdbuf = ds1216_read();
-
- sec = BCD2BIN(DS1216_SEC(rdbuf));
- min = BCD2BIN(DS1216_MIN(rdbuf));
- hour = BCD2BIN(DS1216_HOUR(rdbuf));
- date = BCD2BIN(DS1216_DATE(rdbuf));
- month = BCD2BIN(DS1216_MONTH(rdbuf));
- year = BCD2BIN(DS1216_YEAR(rdbuf));
-
- if (DS1216_1224(rdbuf) && DS1216_AMPM(rdbuf))
- hour+=12;
-
- if (year < 70)
- year += 2000;
- else
- year += 1900;
-
- return mktime(year, month, date, hour, min, sec);
-}
-
-int ds1216_set_rtc_mmss(unsigned long nowtime)
-{
- printk("ds1216_set_rtc_mmss called but not implemented\n");
- return -1;
-}
diff --git a/arch/mips/sni/eisa.c b/arch/mips/sni/eisa.c
new file mode 100644
index 00000000000..179b5d556ad
--- /dev/null
+++ b/arch/mips/sni/eisa.c
@@ -0,0 +1,50 @@
+/*
+ * Virtual EISA root driver.
+ * Acts as a placeholder if we don't have a proper EISA bridge.
+ *
+ * (C) 2003 Marc Zyngier <maz@wild-wind.fr.eu.org>
+ * modified for SNI usage by Thomas Bogendoerfer
+ *
+ * This code is released under the GPL version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/eisa.h>
+#include <linux/init.h>
+
+/* The default EISA device parent (virtual root device).
+ * Now use a platform device, since that's the obvious choice. */
+
+static struct platform_device eisa_root_dev = {
+ .name = "eisa",
+ .id = 0,
+};
+
+static struct eisa_root_device eisa_bus_root = {
+ .dev = &eisa_root_dev.dev,
+ .bus_base_addr = 0,
+ .res = &ioport_resource,
+ .slots = EISA_MAX_SLOTS,
+ .dma_mask = 0xffffffff,
+ .force_probe = 1,
+};
+
+int __init sni_eisa_root_init(void)
+{
+ int r;
+
+ r = platform_device_register(&eisa_root_dev);
+ if (!r)
+ return r;
+
+ dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root);
+
+ if (eisa_root_register(&eisa_bus_root)) {
+ /* A real bridge may have been registered before
+ * us. So quietly unregister. */
+ platform_device_unregister(&eisa_root_dev);
+ return -1;
+ }
+ return 0;
+}
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 9ccffdfb828..ac61b90bcc6 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -35,7 +35,7 @@ static irqreturn_t sni_isa_irq_handler(int dummy, void *p)
if (unlikely(irq < 0))
return IRQ_NONE;
- do_IRQ(irq);
+ generic_handle_irq(irq);
return IRQ_HANDLED;
}
@@ -58,25 +58,25 @@ void __init arch_init_irq(void)
case SNI_BRD_10NEW:
case SNI_BRD_TOWER_OASIC:
case SNI_BRD_MINITOWER:
- sni_a20r_irq_init();
- break;
+ sni_a20r_irq_init();
+ break;
case SNI_BRD_PCI_TOWER:
- sni_pcit_irq_init();
- break;
+ sni_pcit_irq_init();
+ break;
case SNI_BRD_PCI_TOWER_CPLUS:
- sni_pcit_cplus_irq_init();
- break;
+ sni_pcit_cplus_irq_init();
+ break;
case SNI_BRD_RM200:
- sni_rm200_irq_init();
- break;
+ sni_rm200_irq_init();
+ break;
case SNI_BRD_PCI_MTOWER:
case SNI_BRD_PCI_DESKTOP:
case SNI_BRD_PCI_MTOWER_CPLUS:
- sni_pcimt_irq_init();
- break;
+ sni_pcimt_irq_init();
+ break;
}
}
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index 9ee208daa8b..12336c2a649 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -6,15 +6,15 @@
* for more details.
*
* Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*/
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/serial_8250.h>
-#include <asm/mc146818-time.h>
#include <asm/sni.h>
#include <asm/time.h>
#include <asm/i8259.h>
@@ -29,7 +29,7 @@ static void __init sni_pcimt_sc_init(void)
scsiz = cacheconf & 7;
if (scsiz == 0) {
- printk("Second level cache is deactived.\n");
+ printk("Second level cache is deactivated.\n");
return;
}
if (scsiz >= 6) {
@@ -60,7 +60,7 @@ static inline void sni_pcimt_detect(void)
p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
if ((csmsr & 0x80) == 0)
p += sprintf(p, ", board revision %s",
- (csmsr & 0x20) ? "D" : "C");
+ (csmsr & 0x20) ? "D" : "C");
asic = csmsr & 0x80;
asic = (csmsr & 0x08) ? asic : !asic;
p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
@@ -90,6 +90,26 @@ static struct platform_device pcimt_serial8250_device = {
},
};
+static struct resource pcimt_cmos_rsrc[] = {
+ {
+ .start = 0x70,
+ .end = 0x71,
+ .flags = IORESOURCE_IO
+ },
+ {
+ .start = 8,
+ .end = 8,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device pcimt_cmos_device = {
+ .name = "rtc_cmos",
+ .num_resources = ARRAY_SIZE(pcimt_cmos_rsrc),
+ .resource = pcimt_cmos_rsrc
+};
+
+
static struct resource sni_io_resource = {
.start = 0x00000000UL,
.end = 0x03bfffffUL,
@@ -131,6 +151,19 @@ static struct resource pcimt_io_resources[] = {
}
};
+static struct resource pcimt_mem_resources[] = {
+ {
+ /*
+ * this region should only be 4 bytes long,
+ * but it's 16MB on all RM300C I've checked
+ */
+ .start = 0x1a000000,
+ .end = 0x1affffff,
+ .name = "PCI INT ACK",
+ .flags = IORESOURCE_BUSY
+ }
+};
+
static struct resource sni_mem_resource = {
.start = 0x18000000UL,
.end = 0x1fbfffffUL,
@@ -145,46 +178,42 @@ static void __init sni_pcimt_resource_init(void)
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
request_resource(&sni_io_resource, pcimt_io_resources + i);
+ /* request MEM space for devices used on all i[345]86 PCs */
+ for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
+ request_resource(&sni_mem_resource, pcimt_mem_resources + i);
}
extern struct pci_ops sni_pcimt_ops;
+#ifdef CONFIG_PCI
static struct pci_controller sni_controller = {
.pci_ops = &sni_pcimt_ops,
.mem_resource = &sni_mem_resource,
.mem_offset = 0x00000000UL,
.io_resource = &sni_io_resource,
.io_offset = 0x00000000UL,
- .io_map_base = SNI_PORT_BASE
+ .io_map_base = SNI_PORT_BASE
};
+#endif
-static void enable_pcimt_irq(unsigned int irq)
+static void enable_pcimt_irq(struct irq_data *d)
{
- unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
+ unsigned int mask = 1 << (d->irq - PCIMT_IRQ_INT2);
*(volatile u8 *) PCIMT_IRQSEL |= mask;
}
-void disable_pcimt_irq(unsigned int irq)
+void disable_pcimt_irq(struct irq_data *d)
{
- unsigned int mask = ~(1 << (irq - PCIMT_IRQ_INT2));
+ unsigned int mask = ~(1 << (d->irq - PCIMT_IRQ_INT2));
*(volatile u8 *) PCIMT_IRQSEL &= mask;
}
-static void end_pcimt_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_pcimt_irq(irq);
-}
-
static struct irq_chip pcimt_irq_type = {
- .typename = "PCIMT",
- .ack = disable_pcimt_irq,
- .mask = disable_pcimt_irq,
- .mask_ack = disable_pcimt_irq,
- .unmask = enable_pcimt_irq,
- .end = end_pcimt_irq,
+ .name = "PCIMT",
+ .irq_mask = disable_pcimt_irq,
+ .irq_unmask = enable_pcimt_irq,
};
/*
@@ -209,9 +238,9 @@ static void pcimt_hwint1(void)
if (pend & IT_EISA) {
int irq;
/*
- * Note: ASIC PCI's builtin interrupt achknowledge feature is
+ * Note: ASIC PCI's builtin interrupt acknowledge feature is
* broken. Using it may result in loss of some or all i8259
- * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
+ * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
*/
irq = i8259_irq();
if (unlikely(irq < 0))
@@ -249,9 +278,9 @@ static void sni_pcimt_hwint(void)
u32 pending = read_c0_cause() & read_c0_status();
if (pending & C_IRQ5)
- do_IRQ (MIPS_CPU_IRQ_BASE + 7);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
else if (pending & C_IRQ4)
- do_IRQ (MIPS_CPU_IRQ_BASE + 6);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 6);
else if (pending & C_IRQ3)
pcimt_hwint3();
else if (pending & C_IRQ1)
@@ -269,18 +298,15 @@ void __init sni_pcimt_irq_init(void)
mips_cpu_irq_init();
/* Actually we've got more interrupts to handle ... */
for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++)
- set_irq_chip(i, &pcimt_irq_type);
+ irq_set_chip_and_handler(i, &pcimt_irq_type, handle_level_irq);
sni_hwint = sni_pcimt_hwint;
change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3);
}
-void sni_pcimt_init(void)
+void __init sni_pcimt_init(void)
{
sni_pcimt_detect();
sni_pcimt_sc_init();
- rtc_mips_get_time = mc146818_get_cmos_time;
- rtc_mips_set_time = mc146818_set_rtc_mmss;
- board_time_init = sni_cpu_time_init;
ioport_resource.end = sni_io_resource.end;
#ifdef CONFIG_PCI
PCIBIOS_MIN_IO = 0x9000;
@@ -295,8 +321,9 @@ static int __init snirm_pcimt_setup_devinit(void)
case SNI_BRD_PCI_MTOWER:
case SNI_BRD_PCI_DESKTOP:
case SNI_BRD_PCI_MTOWER_CPLUS:
- platform_device_register(&pcimt_serial8250_device);
- break;
+ platform_device_register(&pcimt_serial8250_device);
+ platform_device_register(&pcimt_cmos_device);
+ break;
}
return 0;
diff --git a/arch/mips/sni/pcimt_scache.c b/arch/mips/sni/pcimt_scache.c
deleted file mode 100644
index a59d457fa8b..00000000000
--- a/arch/mips/sni/pcimt_scache.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/mips/sni/pcimt_scache.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 1997, 1998 by Ralf Baechle
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/bcache.h>
-#include <asm/sni.h>
-
-#define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF)
-#define invspace (*(volatile unsigned int *)PCIMT_INVSPACE)
-
-void __init sni_pcimt_sc_init(void)
-{
- unsigned int scsiz, sc_size;
-
- scsiz = cacheconf & 7;
- if (scsiz == 0) {
- printk("Second level cache is deactived.\n");
- return;
- }
- if (scsiz >= 6) {
- printk("Invalid second level cache size configured, "
- "deactivating second level cache.\n");
- cacheconf = 0;
- return;
- }
-
- sc_size = 128 << scsiz;
- printk("%dkb second level cache detected, deactivating.\n", sc_size);
- cacheconf = 0;
-}
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index 00d151f4d12..05bb51676e8 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -10,10 +10,10 @@
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/serial_8250.h>
-#include <asm/mc146818-time.h>
#include <asm/sni.h>
#include <asm/time.h>
#include <asm/irq_cpu.h>
@@ -58,6 +58,30 @@ static struct platform_device pcit_cplus_serial8250_device = {
},
};
+static struct resource pcit_cmos_rsrc[] = {
+ {
+ .start = 0x70,
+ .end = 0x71,
+ .flags = IORESOURCE_IO
+ },
+ {
+ .start = 8,
+ .end = 8,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device pcit_cmos_device = {
+ .name = "rtc_cmos",
+ .num_resources = ARRAY_SIZE(pcit_cmos_rsrc),
+ .resource = pcit_cmos_rsrc
+};
+
+static struct platform_device pcit_pcspeaker_pdev = {
+ .name = "pcspkr",
+ .id = -1,
+};
+
static struct resource sni_io_resource = {
.start = 0x00000000UL,
.end = 0x03bfffffUL,
@@ -104,13 +128,6 @@ static struct resource pcit_io_resources[] = {
}
};
-static struct resource sni_mem_resource = {
- .start = 0x18000000UL,
- .end = 0x1fbfffffUL,
- .name = "PCIT PCI MEM",
- .flags = IORESOURCE_MEM
-};
-
static void __init sni_pcit_resource_init(void)
{
int i;
@@ -123,42 +140,42 @@ static void __init sni_pcit_resource_init(void)
extern struct pci_ops sni_pcit_ops;
+#ifdef CONFIG_PCI
+static struct resource sni_mem_resource = {
+ .start = 0x18000000UL,
+ .end = 0x1fbfffffUL,
+ .name = "PCIT PCI MEM",
+ .flags = IORESOURCE_MEM
+};
+
static struct pci_controller sni_pcit_controller = {
.pci_ops = &sni_pcit_ops,
.mem_resource = &sni_mem_resource,
.mem_offset = 0x00000000UL,
.io_resource = &sni_io_resource,
.io_offset = 0x00000000UL,
- .io_map_base = SNI_PORT_BASE
+ .io_map_base = SNI_PORT_BASE
};
+#endif /* CONFIG_PCI */
-static void enable_pcit_irq(unsigned int irq)
+static void enable_pcit_irq(struct irq_data *d)
{
- u32 mask = 1 << (irq - SNI_PCIT_INT_START + 24);
+ u32 mask = 1 << (d->irq - SNI_PCIT_INT_START + 24);
*(volatile u32 *)SNI_PCIT_INT_REG |= mask;
}
-void disable_pcit_irq(unsigned int irq)
+void disable_pcit_irq(struct irq_data *d)
{
- u32 mask = 1 << (irq - SNI_PCIT_INT_START + 24);
+ u32 mask = 1 << (d->irq - SNI_PCIT_INT_START + 24);
*(volatile u32 *)SNI_PCIT_INT_REG &= ~mask;
}
-void end_pcit_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_pcit_irq(irq);
-}
-
static struct irq_chip pcit_irq_type = {
- .typename = "PCIT",
- .ack = disable_pcit_irq,
- .mask = disable_pcit_irq,
- .mask_ack = disable_pcit_irq,
- .unmask = enable_pcit_irq,
- .end = end_pcit_irq,
+ .name = "PCIT",
+ .irq_mask = disable_pcit_irq,
+ .irq_unmask = enable_pcit_irq,
};
static void pcit_hwint1(void)
@@ -170,8 +187,8 @@ static void pcit_hwint1(void)
irq = ffs((pending >> 16) & 0x7f);
if (likely(irq > 0))
- do_IRQ (irq + SNI_PCIT_INT_START - 1);
- set_c0_status (IE_IRQ1);
+ do_IRQ(irq + SNI_PCIT_INT_START - 1);
+ set_c0_status(IE_IRQ1);
}
static void pcit_hwint0(void)
@@ -183,8 +200,8 @@ static void pcit_hwint0(void)
irq = ffs((pending >> 16) & 0x3f);
if (likely(irq > 0))
- do_IRQ (irq + SNI_PCIT_INT_START - 1);
- set_c0_status (IE_IRQ0);
+ do_IRQ(irq + SNI_PCIT_INT_START - 1);
+ set_c0_status(IE_IRQ0);
}
static void sni_pcit_hwint(void)
@@ -194,11 +211,11 @@ static void sni_pcit_hwint(void)
if (pending & C_IRQ1)
pcit_hwint1();
else if (pending & C_IRQ2)
- do_IRQ (MIPS_CPU_IRQ_BASE + 4);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 4);
else if (pending & C_IRQ3)
- do_IRQ (MIPS_CPU_IRQ_BASE + 5);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 5);
else if (pending & C_IRQ5)
- do_IRQ (MIPS_CPU_IRQ_BASE + 7);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
}
static void sni_pcit_hwint_cplus(void)
@@ -208,13 +225,13 @@ static void sni_pcit_hwint_cplus(void)
if (pending & C_IRQ0)
pcit_hwint0();
else if (pending & C_IRQ1)
- do_IRQ (MIPS_CPU_IRQ_BASE + 3);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 3);
else if (pending & C_IRQ2)
- do_IRQ (MIPS_CPU_IRQ_BASE + 4);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 4);
else if (pending & C_IRQ3)
- do_IRQ (MIPS_CPU_IRQ_BASE + 5);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 5);
else if (pending & C_IRQ5)
- do_IRQ (MIPS_CPU_IRQ_BASE + 7);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
}
void __init sni_pcit_irq_init(void)
@@ -223,11 +240,11 @@ void __init sni_pcit_irq_init(void)
mips_cpu_irq_init();
for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
- set_irq_chip(i, &pcit_irq_type);
+ irq_set_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
*(volatile u32 *)SNI_PCIT_INT_REG = 0;
sni_hwint = sni_pcit_hwint;
change_c0_status(ST0_IM, IE_IRQ1);
- setup_irq (SNI_PCIT_INT_START + 6, &sni_isa_irq);
+ setup_irq(SNI_PCIT_INT_START + 6, &sni_isa_irq);
}
void __init sni_pcit_cplus_irq_init(void)
@@ -236,18 +253,15 @@ void __init sni_pcit_cplus_irq_init(void)
mips_cpu_irq_init();
for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
- set_irq_chip(i, &pcit_irq_type);
+ irq_set_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
*(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
sni_hwint = sni_pcit_hwint_cplus;
change_c0_status(ST0_IM, IE_IRQ0);
- setup_irq (MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq);
+ setup_irq(MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq);
}
-void sni_pcit_init(void)
+void __init sni_pcit_init(void)
{
- rtc_mips_get_time = mc146818_get_cmos_time;
- rtc_mips_set_time = mc146818_set_rtc_mmss;
- board_time_init = sni_cpu_time_init;
ioport_resource.end = sni_io_resource.end;
#ifdef CONFIG_PCI
PCIBIOS_MIN_IO = 0x9000;
@@ -260,12 +274,16 @@ static int __init snirm_pcit_setup_devinit(void)
{
switch (sni_brd_type) {
case SNI_BRD_PCI_TOWER:
- platform_device_register(&pcit_serial8250_device);
- break;
+ platform_device_register(&pcit_serial8250_device);
+ platform_device_register(&pcit_cmos_device);
+ platform_device_register(&pcit_pcspeaker_pdev);
+ break;
case SNI_BRD_PCI_TOWER_CPLUS:
- platform_device_register(&pcit_cplus_serial8250_device);
- break;
+ platform_device_register(&pcit_cplus_serial8250_device);
+ platform_device_register(&pcit_cmos_device);
+ platform_device_register(&pcit_pcspeaker_pdev);
+ break;
}
return 0;
}
diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c
index 2eada8aea68..244f9427625 100644
--- a/arch/mips/sni/reset.c
+++ b/arch/mips/sni/reset.c
@@ -5,7 +5,6 @@
*/
#include <asm/io.h>
#include <asm/reboot.h>
-#include <asm/system.h>
#include <asm/sni.h>
/*
@@ -35,15 +34,11 @@ void sni_machine_restart(char *command)
kb_wait();
for (j = 0; j < 100000 ; j++)
/* nothing */;
- outb_p(0xfe,0x64); /* pulse reset low */
+ outb_p(0xfe, 0x64); /* pulse reset low */
}
}
}
-void sni_machine_halt(void)
-{
-}
-
void sni_machine_power_off(void)
{
*(volatile unsigned char *)PCIMT_CSWCSM = 0xfd;
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index b82ff129f5e..a046b302623 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -5,31 +5,37 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ *
+ * i8259 parts ripped out of arch/mips/kernel/i8259.c
*/
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/io.h>
#include <asm/sni.h>
#include <asm/time.h>
-#include <asm/ds1216.h>
#include <asm/irq_cpu.h>
-#define PORT(_base,_irq) \
+#define RM200_I8259A_IRQ_BASE 32
+
+#define MEMPORT(_base,_irq) \
{ \
- .iobase = _base, \
+ .mapbase = _base, \
.irq = _irq, \
.uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP, \
}
static struct plat_serial8250_port rm200_data[] = {
- PORT(0x3f8, 4),
- PORT(0x2f8, 3),
+ MEMPORT(0x160003f8, RM200_I8259A_IRQ_BASE + 4),
+ MEMPORT(0x160002f8, RM200_I8259A_IRQ_BASE + 3),
{ },
};
@@ -41,20 +47,34 @@ static struct platform_device rm200_serial8250_device = {
},
};
+static struct resource rm200_ds1216_rsrc[] = {
+ {
+ .start = 0x1cd41ffc,
+ .end = 0x1cd41fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device rm200_ds1216_device = {
+ .name = "rtc-ds1216",
+ .num_resources = ARRAY_SIZE(rm200_ds1216_rsrc),
+ .resource = rm200_ds1216_rsrc
+};
+
static struct resource snirm_82596_rm200_rsrc[] = {
{
- .start = 0xb8000000,
- .end = 0xb80fffff,
+ .start = 0x18000000,
+ .end = 0x180fffff,
.flags = IORESOURCE_MEM
},
{
- .start = 0xbb000000,
- .end = 0xbb000004,
+ .start = 0x1b000000,
+ .end = 0x1b000004,
.flags = IORESOURCE_MEM
},
{
- .start = 0xbff00000,
- .end = 0xbff00020,
+ .start = 0x1ff00000,
+ .end = 0x1ff00020,
.flags = IORESOURCE_MEM
},
{
@@ -68,15 +88,15 @@ static struct resource snirm_82596_rm200_rsrc[] = {
};
static struct platform_device snirm_82596_rm200_pdev = {
- .name = "snirm_82596",
- .num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc),
- .resource = snirm_82596_rm200_rsrc
+ .name = "snirm_82596",
+ .num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc),
+ .resource = snirm_82596_rm200_rsrc
};
static struct resource snirm_53c710_rm200_rsrc[] = {
{
- .start = 0xb9000000,
- .end = 0xb90fffff,
+ .start = 0x19000000,
+ .end = 0x190fffff,
.flags = IORESOURCE_MEM
},
{
@@ -87,57 +107,344 @@ static struct resource snirm_53c710_rm200_rsrc[] = {
};
static struct platform_device snirm_53c710_rm200_pdev = {
- .name = "snirm_53c710",
- .num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc),
- .resource = snirm_53c710_rm200_rsrc
+ .name = "snirm_53c710",
+ .num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc),
+ .resource = snirm_53c710_rm200_rsrc
};
static int __init snirm_setup_devinit(void)
{
if (sni_brd_type == SNI_BRD_RM200) {
platform_device_register(&rm200_serial8250_device);
+ platform_device_register(&rm200_ds1216_device);
platform_device_register(&snirm_82596_rm200_pdev);
platform_device_register(&snirm_53c710_rm200_pdev);
+ sni_eisa_root_init();
}
return 0;
}
device_initcall(snirm_setup_devinit);
+/*
+ * RM200 has an ISA and an EISA bus. The iSA bus is only used
+ * for onboard devices and also has twi i8259 PICs. Since these
+ * PICs are no accessible via inb/outb the following code uses
+ * readb/writeb to access them
+ */
+
+static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock);
+#define PIC_CMD 0x00
+#define PIC_IMR 0x01
+#define PIC_ISR PIC_CMD
+#define PIC_POLL PIC_ISR
+#define PIC_OCW3 PIC_ISR
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR 2
+#define MASTER_ICW4_DEFAULT 0x01
+#define SLAVE_ICW4_DEFAULT 0x01
+
+/*
+ * This contains the irq mask for both 8259A irq controllers,
+ */
+static unsigned int rm200_cached_irq_mask = 0xffff;
+static __iomem u8 *rm200_pic_master;
+static __iomem u8 *rm200_pic_slave;
+
+#define cached_master_mask (rm200_cached_irq_mask)
+#define cached_slave_mask (rm200_cached_irq_mask >> 8)
+
+static void sni_rm200_disable_8259A_irq(struct irq_data *d)
+{
+ unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE;
+ unsigned long flags;
+
+ mask = 1 << irq;
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ rm200_cached_irq_mask |= mask;
+ if (irq & 8)
+ writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
+ else
+ writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+}
+
+static void sni_rm200_enable_8259A_irq(struct irq_data *d)
+{
+ unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE;
+ unsigned long flags;
+
+ mask = ~(1 << irq);
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ rm200_cached_irq_mask &= mask;
+ if (irq & 8)
+ writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
+ else
+ writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+}
+
+static inline int sni_rm200_i8259A_irq_real(unsigned int irq)
+{
+ int value;
+ int irqmask = 1 << irq;
+
+ if (irq < 8) {
+ writeb(0x0B, rm200_pic_master + PIC_CMD);
+ value = readb(rm200_pic_master + PIC_CMD) & irqmask;
+ writeb(0x0A, rm200_pic_master + PIC_CMD);
+ return value;
+ }
+ writeb(0x0B, rm200_pic_slave + PIC_CMD); /* ISR register */
+ value = readb(rm200_pic_slave + PIC_CMD) & (irqmask >> 8);
+ writeb(0x0A, rm200_pic_slave + PIC_CMD);
+ return value;
+}
+
+/*
+ * Careful! The 8259A is a fragile beast, it pretty
+ * much _has_ to be done exactly like this (mask it
+ * first, _then_ send the EOI, and the order of EOI
+ * to the two 8259s is important!
+ */
+void sni_rm200_mask_and_ack_8259A(struct irq_data *d)
+{
+ unsigned int irqmask, irq = d->irq - RM200_I8259A_IRQ_BASE;
+ unsigned long flags;
+
+ irqmask = 1 << irq;
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ /*
+ * Lightweight spurious IRQ detection. We do not want
+ * to overdo spurious IRQ handling - it's usually a sign
+ * of hardware problems, so we only do the checks we can
+ * do without slowing down good hardware unnecessarily.
+ *
+ * Note that IRQ7 and IRQ15 (the two spurious IRQs
+ * usually resulting from the 8259A-1|2 PICs) occur
+ * even if the IRQ is masked in the 8259A. Thus we
+ * can check spurious 8259A IRQs without doing the
+ * quite slow i8259A_irq_real() call for every IRQ.
+ * This does not cover 100% of spurious interrupts,
+ * but should be enough to warn the user that there
+ * is something bad going on ...
+ */
+ if (rm200_cached_irq_mask & irqmask)
+ goto spurious_8259A_irq;
+ rm200_cached_irq_mask |= irqmask;
+
+handle_real_irq:
+ if (irq & 8) {
+ readb(rm200_pic_slave + PIC_IMR);
+ writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
+ writeb(0x60+(irq & 7), rm200_pic_slave + PIC_CMD);
+ writeb(0x60+PIC_CASCADE_IR, rm200_pic_master + PIC_CMD);
+ } else {
+ readb(rm200_pic_master + PIC_IMR);
+ writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
+ writeb(0x60+irq, rm200_pic_master + PIC_CMD);
+ }
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+ return;
+
+spurious_8259A_irq:
+ /*
+ * this is the slow path - should happen rarely.
+ */
+ if (sni_rm200_i8259A_irq_real(irq))
+ /*
+ * oops, the IRQ _is_ in service according to the
+ * 8259A - not spurious, go handle it.
+ */
+ goto handle_real_irq;
+
+ {
+ static int spurious_irq_mask;
+ /*
+ * At this point we can be sure the IRQ is spurious,
+ * lets ACK and report it. [once per IRQ]
+ */
+ if (!(spurious_irq_mask & irqmask)) {
+ printk(KERN_DEBUG
+ "spurious RM200 8259A interrupt: IRQ%d.\n", irq);
+ spurious_irq_mask |= irqmask;
+ }
+ atomic_inc(&irq_err_count);
+ /*
+ * Theoretically we do not have to handle this IRQ,
+ * but in Linux this does not cause problems and is
+ * simpler for us.
+ */
+ goto handle_real_irq;
+ }
+}
-#define SNI_RM200_INT_STAT_REG 0xbc000000
-#define SNI_RM200_INT_ENA_REG 0xbc080000
+static struct irq_chip sni_rm200_i8259A_chip = {
+ .name = "RM200-XT-PIC",
+ .irq_mask = sni_rm200_disable_8259A_irq,
+ .irq_unmask = sni_rm200_enable_8259A_irq,
+ .irq_mask_ack = sni_rm200_mask_and_ack_8259A,
+};
+
+/*
+ * Do the traditional i8259 interrupt polling thing. This is for the few
+ * cases where no better interrupt acknowledge method is available and we
+ * absolutely must touch the i8259.
+ */
+static inline int sni_rm200_i8259_irq(void)
+{
+ int irq;
+
+ raw_spin_lock(&sni_rm200_i8259A_lock);
+
+ /* Perform an interrupt acknowledge cycle on controller 1. */
+ writeb(0x0C, rm200_pic_master + PIC_CMD); /* prepare for poll */
+ irq = readb(rm200_pic_master + PIC_CMD) & 7;
+ if (irq == PIC_CASCADE_IR) {
+ /*
+ * Interrupt is cascaded so perform interrupt
+ * acknowledge on controller 2.
+ */
+ writeb(0x0C, rm200_pic_slave + PIC_CMD); /* prepare for poll */
+ irq = (readb(rm200_pic_slave + PIC_CMD) & 7) + 8;
+ }
+
+ if (unlikely(irq == 7)) {
+ /*
+ * This may be a spurious interrupt.
+ *
+ * Read the interrupt status register (ISR). If the most
+ * significant bit is not set then there is no valid
+ * interrupt.
+ */
+ writeb(0x0B, rm200_pic_master + PIC_ISR); /* ISR register */
+ if (~readb(rm200_pic_master + PIC_ISR) & 0x80)
+ irq = -1;
+ }
+
+ raw_spin_unlock(&sni_rm200_i8259A_lock);
+
+ return likely(irq >= 0) ? irq + RM200_I8259A_IRQ_BASE : irq;
+}
+
+void sni_rm200_init_8259A(void)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+
+ writeb(0xff, rm200_pic_master + PIC_IMR);
+ writeb(0xff, rm200_pic_slave + PIC_IMR);
+
+ writeb(0x11, rm200_pic_master + PIC_CMD);
+ writeb(0, rm200_pic_master + PIC_IMR);
+ writeb(1U << PIC_CASCADE_IR, rm200_pic_master + PIC_IMR);
+ writeb(MASTER_ICW4_DEFAULT, rm200_pic_master + PIC_IMR);
+ writeb(0x11, rm200_pic_slave + PIC_CMD);
+ writeb(8, rm200_pic_slave + PIC_IMR);
+ writeb(PIC_CASCADE_IR, rm200_pic_slave + PIC_IMR);
+ writeb(SLAVE_ICW4_DEFAULT, rm200_pic_slave + PIC_IMR);
+ udelay(100); /* wait for 8259A to initialize */
+
+ writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
+ writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
+
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction sni_rm200_irq2 = {
+ .handler = no_action,
+ .name = "cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+static struct resource sni_rm200_pic1_resource = {
+ .name = "onboard ISA pic1",
+ .start = 0x16000020,
+ .end = 0x16000023,
+ .flags = IORESOURCE_BUSY
+};
+
+static struct resource sni_rm200_pic2_resource = {
+ .name = "onboard ISA pic2",
+ .start = 0x160000a0,
+ .end = 0x160000a3,
+ .flags = IORESOURCE_BUSY
+};
+
+/* ISA irq handler */
+static irqreturn_t sni_rm200_i8259A_irq_handler(int dummy, void *p)
+{
+ int irq;
+
+ irq = sni_rm200_i8259_irq();
+ if (unlikely(irq < 0))
+ return IRQ_NONE;
+
+ do_IRQ(irq);
+ return IRQ_HANDLED;
+}
+
+struct irqaction sni_rm200_i8259A_irq = {
+ .handler = sni_rm200_i8259A_irq_handler,
+ .name = "onboard ISA",
+ .flags = IRQF_SHARED
+};
+
+void __init sni_rm200_i8259_irqs(void)
+{
+ int i;
+
+ rm200_pic_master = ioremap_nocache(0x16000020, 4);
+ if (!rm200_pic_master)
+ return;
+ rm200_pic_slave = ioremap_nocache(0x160000a0, 4);
+ if (!rm200_pic_slave) {
+ iounmap(rm200_pic_master);
+ return;
+ }
+
+ insert_resource(&iomem_resource, &sni_rm200_pic1_resource);
+ insert_resource(&iomem_resource, &sni_rm200_pic2_resource);
+
+ sni_rm200_init_8259A();
+
+ for (i = RM200_I8259A_IRQ_BASE; i < RM200_I8259A_IRQ_BASE + 16; i++)
+ irq_set_chip_and_handler(i, &sni_rm200_i8259A_chip,
+ handle_level_irq);
+
+ setup_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, &sni_rm200_irq2);
+}
+
+
+#define SNI_RM200_INT_STAT_REG CKSEG1ADDR(0xbc000000)
+#define SNI_RM200_INT_ENA_REG CKSEG1ADDR(0xbc080000)
#define SNI_RM200_INT_START 24
#define SNI_RM200_INT_END 28
-static void enable_rm200_irq(unsigned int irq)
+static void enable_rm200_irq(struct irq_data *d)
{
- unsigned int mask = 1 << (irq - SNI_RM200_INT_START);
+ unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START);
*(volatile u8 *)SNI_RM200_INT_ENA_REG &= ~mask;
}
-void disable_rm200_irq(unsigned int irq)
+void disable_rm200_irq(struct irq_data *d)
{
- unsigned int mask = 1 << (irq - SNI_RM200_INT_START);
+ unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START);
*(volatile u8 *)SNI_RM200_INT_ENA_REG |= mask;
}
-void end_rm200_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_rm200_irq(irq);
-}
-
static struct irq_chip rm200_irq_type = {
- .typename = "RM200",
- .ack = disable_rm200_irq,
- .mask = disable_rm200_irq,
- .mask_ack = disable_rm200_irq,
- .unmask = enable_rm200_irq,
- .end = end_rm200_irq,
+ .name = "RM200",
+ .irq_mask = disable_rm200_irq,
+ .irq_unmask = enable_rm200_irq,
};
static void sni_rm200_hwint(void)
@@ -148,16 +455,16 @@ static void sni_rm200_hwint(void)
int irq;
if (pending & C_IRQ5)
- do_IRQ (MIPS_CPU_IRQ_BASE + 7);
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
else if (pending & C_IRQ0) {
- clear_c0_status (IE_IRQ0);
+ clear_c0_status(IE_IRQ0);
mask = *(volatile u8 *)SNI_RM200_INT_ENA_REG ^ 0x1f;
stat = *(volatile u8 *)SNI_RM200_INT_STAT_REG ^ 0x14;
irq = ffs(stat & mask & 0x1f);
if (likely(irq > 0))
- do_IRQ (irq + SNI_RM200_INT_START - 1);
- set_c0_status (IE_IRQ0);
+ do_IRQ(irq + SNI_RM200_INT_START - 1);
+ set_c0_status(IE_IRQ0);
}
}
@@ -167,20 +474,17 @@ void __init sni_rm200_irq_init(void)
* (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f;
+ sni_rm200_i8259_irqs();
mips_cpu_irq_init();
/* Actually we've got more interrupts to handle ... */
for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++)
- set_irq_chip(i, &rm200_irq_type);
+ irq_set_chip_and_handler(i, &rm200_irq_type, handle_level_irq);
sni_hwint = sni_rm200_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
- setup_irq (SNI_RM200_INT_START + 0, &sni_isa_irq);
+ setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq);
+ setup_irq(SNI_RM200_INT_START + 1, &sni_isa_irq);
}
-void sni_rm200_init(void)
+void __init sni_rm200_init(void)
{
- set_io_port_base(SNI_PORT_BASE + 0x02000000);
- ioport_resource.end += 0x02000000;
- ds1216_base = (volatile unsigned char *) SNI_DS1216_RM200_BASE;
- rtc_mips_get_time = ds1216_get_cmos_time;
- board_time_init = sni_cpu_time_init;
}
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 68d7cf609b4..efad85c8c82 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -6,32 +6,39 @@
* for more details.
*
* Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*/
#include <linux/eisa.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/console.h>
#include <linux/fb.h>
#include <linux/screen_info.h>
-#ifdef CONFIG_ARC
-#include <asm/arc/types.h>
+#ifdef CONFIG_FW_ARC
+#include <asm/fw/arc/types.h>
#include <asm/sgialib.h>
#endif
+#ifdef CONFIG_FW_SNIPROM
+#include <asm/mipsprom.h>
+#endif
+
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
#include <asm/io.h>
#include <asm/reboot.h>
#include <asm/sni.h>
unsigned int sni_brd_type;
+EXPORT_SYMBOL(sni_brd_type);
extern void sni_machine_restart(char *command);
-extern void sni_machine_halt(void);
extern void sni_machine_power_off(void);
static void __init sni_display_setup(void)
{
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_ARC)
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_FW_ARC)
struct screen_info *si = &screen_info;
DISPLAY_STATUS *di;
@@ -48,47 +55,209 @@ static void __init sni_display_setup(void)
#endif
}
+static void __init sni_console_setup(void)
+{
+#ifndef CONFIG_FW_ARC
+ char *ctype;
+ char *cdev;
+ char *baud;
+ int port;
+ static char options[8] __initdata;
+
+ cdev = prom_getenv("console_dev");
+ if (strncmp(cdev, "tty", 3) == 0) {
+ ctype = prom_getenv("console");
+ switch (*ctype) {
+ default:
+ case 'l':
+ port = 0;
+ baud = prom_getenv("lbaud");
+ break;
+ case 'r':
+ port = 1;
+ baud = prom_getenv("rbaud");
+ break;
+ }
+ if (baud)
+ strcpy(options, baud);
+ if (strncmp(cdev, "tty552", 6) == 0)
+ add_preferred_console("ttyS", port,
+ baud ? options : NULL);
+ else
+ add_preferred_console("ttySC", port,
+ baud ? options : NULL);
+ }
+#endif
+}
+
+#ifdef DEBUG
+static void __init sni_idprom_dump(void)
+{
+ int i;
+
+ pr_debug("SNI IDProm dump:\n");
+ for (i = 0; i < 256; i++) {
+ if (i%16 == 0)
+ pr_debug("%04x ", i);
+
+ printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i));
+
+ if (i % 16 == 15)
+ printk("\n");
+ }
+}
+#endif
void __init plat_mem_setup(void)
{
+ int cputype;
+
set_io_port_base(SNI_PORT_BASE);
// ioport_resource.end = sni_io_resource.end;
/*
* Setup (E)ISA I/O memory access stuff
*/
- isa_slot_offset = 0xb0000000;
#ifdef CONFIG_EISA
EISA_bus = 1;
#endif
+ sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE;
+ cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE;
+ switch (sni_brd_type) {
+ case SNI_BRD_TOWER_OASIC:
+ switch (cputype) {
+ case SNI_CPU_M8030:
+ system_type = "RM400-330";
+ break;
+ case SNI_CPU_M8031:
+ system_type = "RM400-430";
+ break;
+ case SNI_CPU_M8037:
+ system_type = "RM400-530";
+ break;
+ case SNI_CPU_M8034:
+ system_type = "RM400-730";
+ break;
+ default:
+ system_type = "RM400-xxx";
+ break;
+ }
+ break;
+ case SNI_BRD_MINITOWER:
+ switch (cputype) {
+ case SNI_CPU_M8021:
+ case SNI_CPU_M8043:
+ system_type = "RM400-120";
+ break;
+ case SNI_CPU_M8040:
+ system_type = "RM400-220";
+ break;
+ case SNI_CPU_M8053:
+ system_type = "RM400-225";
+ break;
+ case SNI_CPU_M8050:
+ system_type = "RM400-420";
+ break;
+ default:
+ system_type = "RM400-xxx";
+ break;
+ }
+ break;
+ case SNI_BRD_PCI_TOWER:
+ system_type = "RM400-Cxx";
+ break;
+ case SNI_BRD_RM200:
+ system_type = "RM200-xxx";
+ break;
+ case SNI_BRD_PCI_MTOWER:
+ system_type = "RM300-Cxx";
+ break;
+ case SNI_BRD_PCI_DESKTOP:
+ switch (read_c0_prid() & PRID_IMP_MASK) {
+ case PRID_IMP_R4600:
+ case PRID_IMP_R4700:
+ system_type = "RM200-C20";
+ break;
+ case PRID_IMP_R5000:
+ system_type = "RM200-C40";
+ break;
+ default:
+ system_type = "RM200-Cxx";
+ break;
+ }
+ break;
+ case SNI_BRD_PCI_TOWER_CPLUS:
+ system_type = "RM400-Exx";
+ break;
+ case SNI_BRD_PCI_MTOWER_CPLUS:
+ system_type = "RM300-Exx";
+ break;
+ }
+ pr_debug("Found SNI brdtype %02x name %s\n", sni_brd_type, system_type);
+
+#ifdef DEBUG
+ sni_idprom_dump();
+#endif
+
switch (sni_brd_type) {
case SNI_BRD_10:
case SNI_BRD_10NEW:
case SNI_BRD_TOWER_OASIC:
case SNI_BRD_MINITOWER:
- sni_a20r_init();
- break;
+ sni_a20r_init();
+ break;
case SNI_BRD_PCI_TOWER:
case SNI_BRD_PCI_TOWER_CPLUS:
- sni_pcit_init();
+ sni_pcit_init();
break;
case SNI_BRD_RM200:
- sni_rm200_init();
- break;
+ sni_rm200_init();
+ break;
case SNI_BRD_PCI_MTOWER:
case SNI_BRD_PCI_DESKTOP:
case SNI_BRD_PCI_MTOWER_CPLUS:
- sni_pcimt_init();
- break;
+ sni_pcimt_init();
+ break;
}
_machine_restart = sni_machine_restart;
- _machine_halt = sni_machine_halt;
pm_power_off = sni_machine_power_off;
sni_display_setup();
+ sni_console_setup();
+}
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+#include <video/vga.h>
+#include <video/cirrus.h>
+
+static void quirk_cirrus_ram_size(struct pci_dev *dev)
+{
+ u16 cmd;
+
+ /*
+ * firmware doesn't set the ram size correct, so we
+ * need to do it here, otherwise we get screen corruption
+ * on older Cirrus chips
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ if ((cmd & (PCI_COMMAND_IO|PCI_COMMAND_MEMORY))
+ == (PCI_COMMAND_IO|PCI_COMMAND_MEMORY)) {
+ vga_wseq(NULL, CL_SEQR6, 0x12); /* unlock all extension registers */
+ vga_wseq(NULL, CL_SEQRF, 0x18);
+ }
}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5434_8,
+ quirk_cirrus_ram_size);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5436,
+ quirk_cirrus_ram_size);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446,
+ quirk_cirrus_ram_size);
+#endif
diff --git a/arch/mips/sni/sniprom.c b/arch/mips/sni/sniprom.c
deleted file mode 100644
index 643366eb854..00000000000
--- a/arch/mips/sni/sniprom.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Big Endian PROM code for SNI RM machines
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2006 Florian Lohoff (flo@rfc822.org)
- * Copyright (C) 2005-2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- */
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/console.h>
-
-#include <asm/addrspace.h>
-#include <asm/sni.h>
-#include <asm/mipsprom.h>
-#include <asm/bootinfo.h>
-
-/* special SNI prom calls */
-/*
- * This does not exist in all proms - SINIX compares
- * the prom env variable "version" against "2.0008"
- * or greater. If lesser it tries to probe interesting
- * registers
- */
-#define PROM_GET_MEMCONF 58
-
-#define PROM_VEC (u64 *)CKSEG1ADDR(0x1fc00000)
-#define PROM_ENTRY(x) (PROM_VEC + (x))
-
-
-static int *(*__prom_putchar)(int) = (int *(*)(int))PROM_ENTRY(PROM_PUTCHAR);
-
-void prom_putchar(char c)
-{
- __prom_putchar(c);
-}
-
-static char *(*__prom_getenv)(char *) = (char *(*)(char *))PROM_ENTRY(PROM_GETENV);
-static void (*__prom_get_memconf)(void *) = (void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF);
-
-char *prom_getenv (char *s)
-{
- return __prom_getenv(s);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-/*
- * /proc/cpuinfo system type
- *
- */
-static const char *systype = "Unknown";
-const char *get_system_type(void)
-{
- return systype;
-}
-
-#define SNI_IDPROM_BASE 0xbff00000
-#define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE+0x28) /* Memsize in 16MB quantities */
-#define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE+0x29) /* Board Type */
-#define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE+0x30) /* CPU Type */
-
-#define SNI_IDPROM_SIZE 0x1000
-
-#ifdef DEBUG
-static void sni_idprom_dump(void)
-{
- int i;
-
- pr_debug("SNI IDProm dump:\n");
- for (i = 0; i < 256; i++) {
- if (i%16 == 0)
- pr_debug("%04x ", i);
-
- printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i));
-
- if (i % 16 == 15)
- printk("\n");
- }
-}
-#endif
-
-static void sni_mem_init(void )
-{
- int i, memsize;
- struct membank {
- u32 size;
- u32 base;
- u32 size2;
- u32 pad1;
- u32 pad2;
- } memconf[8];
-
- /* MemSIZE from prom in 16MByte chunks */
- memsize = *((unsigned char *) SNI_IDPROM_MEMSIZE) * 16;
-
- pr_debug("IDProm memsize: %lu MByte\n", memsize);
-
- /* get memory bank layout from prom */
- __prom_get_memconf(&memconf);
-
- pr_debug("prom_get_mem_conf memory configuration:\n");
- for (i = 0;i < 8 && memconf[i].size; i++) {
- if (sni_brd_type == SNI_BRD_PCI_TOWER ||
- sni_brd_type == SNI_BRD_PCI_TOWER_CPLUS) {
- if (memconf[i].base >= 0x20000000 &&
- memconf[i].base < 0x30000000) {
- memconf[i].base -= 0x20000000;
- }
- }
- pr_debug("Bank%d: %08x @ %08x\n", i,
- memconf[i].size, memconf[i].base);
- add_memory_region(memconf[i].base, memconf[i].size, BOOT_MEM_RAM);
- }
-}
-
-static void __init sni_console_setup(void)
-{
- char *ctype;
- char *cdev;
- char *baud;
- int port;
- static char options[8];
-
- cdev = prom_getenv ("console_dev");
- if (strncmp (cdev, "tty", 3) == 0) {
- ctype = prom_getenv ("console");
- switch (*ctype) {
- default:
- case 'l':
- port = 0;
- baud = prom_getenv("lbaud");
- break;
- case 'r':
- port = 1;
- baud = prom_getenv("rbaud");
- break;
- }
- if (baud)
- strcpy(options, baud);
- add_preferred_console("ttyS", port, baud ? options : NULL);
- }
-}
-
-void __init prom_init(void)
-{
- int argc = fw_arg0;
- char **argv = (void *)fw_arg1;
- int i;
- int cputype;
-
- sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE;
- cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE;
- switch (sni_brd_type) {
- case SNI_BRD_TOWER_OASIC:
- switch (cputype) {
- case SNI_CPU_M8030:
- systype = "RM400-330";
- break;
- case SNI_CPU_M8031:
- systype = "RM400-430";
- break;
- case SNI_CPU_M8037:
- systype = "RM400-530";
- break;
- case SNI_CPU_M8034:
- systype = "RM400-730";
- break;
- default:
- systype = "RM400-xxx";
- break;
- }
- break;
- case SNI_BRD_MINITOWER:
- switch (cputype) {
- case SNI_CPU_M8021:
- case SNI_CPU_M8043:
- systype = "RM400-120";
- break;
- case SNI_CPU_M8040:
- systype = "RM400-220";
- break;
- case SNI_CPU_M8053:
- systype = "RM400-225";
- break;
- case SNI_CPU_M8050:
- systype = "RM400-420";
- break;
- default:
- systype = "RM400-xxx";
- break;
- }
- break;
- case SNI_BRD_PCI_TOWER:
- systype = "RM400-Cxx";
- break;
- case SNI_BRD_RM200:
- systype = "RM200-xxx";
- break;
- case SNI_BRD_PCI_MTOWER:
- systype = "RM300-Cxx";
- break;
- case SNI_BRD_PCI_DESKTOP:
- switch (read_c0_prid() & 0xff00) {
- case PRID_IMP_R4600:
- case PRID_IMP_R4700:
- systype = "RM200-C20";
- break;
- case PRID_IMP_R5000:
- systype = "RM200-C40";
- break;
- default:
- systype = "RM200-Cxx";
- break;
- }
- break;
- case SNI_BRD_PCI_TOWER_CPLUS:
- systype = "RM400-Exx";
- break;
- case SNI_BRD_PCI_MTOWER_CPLUS:
- systype = "RM300-Exx";
- break;
- }
- pr_debug("Found SNI brdtype %02x name %s\n", sni_brd_type,systype);
-
-#ifdef DEBUG
- sni_idprom_dump();
-#endif
- sni_mem_init();
- sni_console_setup();
-
- /* copy prom cmdline parameters to kernel cmdline */
- for (i = 1; i < argc; i++) {
- strcat(arcs_cmdline, argv[i]);
- if (i < (argc - 1))
- strcat(arcs_cmdline, " ");
- }
-}
-
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 20028fc7757..cf8ec568b9d 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -1,64 +1,120 @@
#include <linux/types.h>
+#include <linux/i8253.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
#include <linux/time.h>
+#include <linux/clockchips.h>
#include <asm/sni.h>
#include <asm/time.h>
+#include <asm-generic/rtc.h>
-#define SNI_CLOCK_TICK_RATE 3686400
-#define SNI_COUNTER2_DIV 64
-#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
+#define SNI_CLOCK_TICK_RATE 3686400
+#define SNI_COUNTER2_DIV 64
+#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
-static void sni_a20r_timer_ack(void)
+static void a20r_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
{
- *(volatile u8 *)A20R_PT_TIM0_ACK = 0x0; wmb();
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8;
+ wmb();
+
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8;
+ wmb();
+
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device a20r_clockevent_device = {
+ .name = "a20r-timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+
+ /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */
+
+ .rating = 300,
+ .irq = SNI_A20R_IRQ_TIMER,
+ .set_mode = a20r_set_mode,
+};
+
+static irqreturn_t a20r_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *cd = dev_id;
+
+ *(volatile u8 *)A20R_PT_TIM0_ACK = 0;
+ wmb();
+
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
}
+static struct irqaction a20r_irqaction = {
+ .handler = a20r_interrupt,
+ .flags = IRQF_PERCPU | IRQF_TIMER,
+ .name = "a20r-timer",
+};
+
/*
* a20r platform uses 2 counters to divide the input frequency.
* Counter 2 output is connected to Counter 0 & 1 input.
*/
-static void __init sni_a20r_timer_setup(struct irqaction *irq)
+static void __init sni_a20r_timer_setup(void)
{
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = (SNI_COUNTER0_DIV) & 0xff; wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = (SNI_COUNTER0_DIV >> 8) & 0xff; wmb();
-
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = (SNI_COUNTER2_DIV) & 0xff; wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = (SNI_COUNTER2_DIV >> 8) & 0xff; wmb();
-
- setup_irq(SNI_A20R_IRQ_TIMER, irq);
- mips_timer_ack = sni_a20r_timer_ack;
+ struct clock_event_device *cd = &a20r_clockevent_device;
+ struct irqaction *action = &a20r_irqaction;
+ unsigned int cpu = smp_processor_id();
+
+ cd->cpumask = cpumask_of(cpu);
+ clockevents_register_device(cd);
+ action->dev_id = cd;
+ setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction);
}
-#define SNI_8254_TICK_RATE 1193182UL
+#define SNI_8254_TICK_RATE 1193182UL
-#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255)
+#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255)
static __init unsigned long dosample(void)
{
u32 ct0, ct1;
- volatile u8 msb, lsb;
+ volatile u8 msb;
/* Start the counter. */
- outb_p (0x34, 0x43);
+ outb_p(0x34, 0x43);
outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40);
- outb (SNI_8254_TCSAMP_COUNTER >> 8, 0x40);
+ outb(SNI_8254_TCSAMP_COUNTER >> 8, 0x40);
/* Get initial counter invariant */
ct0 = read_c0_count();
/* Latch and spin until top byte of counter0 is zero */
do {
- outb (0x00, 0x43);
- lsb = inb (0x40);
- msb = inb (0x40);
+ outb(0x00, 0x43);
+ (void) inb(0x40);
+ msb = inb(0x40);
ct1 = read_c0_count();
} while (msb);
/* Stop the counter. */
- outb (0x38, 0x43);
+ outb(0x38, 0x43);
/*
* Return the difference, this is how far the r4k counter increments
* for every 1/HZ seconds. We round off the nearest 1 MHz of master
@@ -71,7 +127,7 @@ static __init unsigned long dosample(void)
/*
* Here we need to calibrate the cycle counter to at least be close.
*/
-__init void sni_cpu_time_init(void)
+void __init plat_time_init(void)
{
unsigned long r4k_ticks[3];
unsigned long r4k_tick;
@@ -115,34 +171,20 @@ __init void sni_cpu_time_init(void)
(int) (r4k_tick % (500000 / HZ)));
mips_hpt_frequency = r4k_tick * HZ;
-}
-/*
- * R4k counter based timer interrupt. Works on RM200-225 and possibly
- * others but not on RM400
- */
-static void __init sni_cpu_timer_setup(struct irqaction *irq)
-{
- setup_irq(SNI_MIPS_IRQ_CPU_TIMER, irq);
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
switch (sni_brd_type) {
case SNI_BRD_10:
case SNI_BRD_10NEW:
case SNI_BRD_TOWER_OASIC:
case SNI_BRD_MINITOWER:
- sni_a20r_timer_setup (irq);
- break;
-
- case SNI_BRD_PCI_TOWER:
- case SNI_BRD_RM200:
- case SNI_BRD_PCI_MTOWER:
- case SNI_BRD_PCI_DESKTOP:
- case SNI_BRD_PCI_TOWER_CPLUS:
- case SNI_BRD_PCI_MTOWER_CPLUS:
- sni_cpu_timer_setup (irq);
- break;
+ sni_a20r_timer_setup();
+ break;
}
+ setup_pit_timer();
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+ ts->tv_sec = -1;
+ ts->tv_nsec = 0;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-14 23:30:30 +0000