diff options
Diffstat (limited to 'arch/mips/sgi-ip27/ip27-irq.c')
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-irq.c | 296 |
1 files changed, 18 insertions, 278 deletions
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 24a85372284..3fbaef97a1b 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -17,9 +17,8 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/timex.h> -#include <linux/slab.h> +#include <linux/smp.h> #include <linux/random.h> -#include <linux/smp_lock.h> #include <linux/kernel.h> #include <linux/kernel_stat.h> #include <linux/delay.h> @@ -28,11 +27,8 @@ #include <asm/bootinfo.h> #include <asm/io.h> #include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/ptrace.h> #include <asm/processor.h> -#include <asm/pci/bridge.h> #include <asm/sn/addrs.h> #include <asm/sn/agent.h> #include <asm/sn/arch.h> @@ -43,7 +39,7 @@ * Linux has a controller-independent x86 interrupt architecture. * every controller has a 'controller-template', that is used * by the main code to do the right thing. Each driver-visible - * interrupt source is transparently wired to the apropriate + * interrupt source is transparently wired to the appropriate * controller. Thus drivers need not be aware of the * interrupt-controller. * @@ -57,50 +53,6 @@ extern asmlinkage void ip27_irq(void); -extern struct bridge_controller *irq_to_bridge[]; -extern int irq_to_slot[]; - -/* - * use these macros to get the encoded nasid and widget id - * from the irq value - */ -#define IRQ_TO_BRIDGE(i) irq_to_bridge[(i)] -#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i] - -static inline int alloc_level(int cpu, int irq) -{ - struct hub_data *hub = hub_data(cpu_to_node(cpu)); - struct slice_data *si = cpu_data[cpu].data; - int level; - - level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE); - if (level >= LEVELS_PER_SLICE) - panic("Cpu %d flooded with devices\n", cpu); - - __set_bit(level, hub->irq_alloc_mask); - si->level_to_irq[level] = irq; - - return level; -} - -static inline int find_level(cpuid_t *cpunum, int irq) -{ - int cpu, i; - - for_each_online_cpu(cpu) { - struct slice_data *si = cpu_data[cpu].data; - - for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++) - if (si->level_to_irq[i] == irq) { - *cpunum = cpu; - - return i; - } - } - - panic("Could not identify cpu/level for irq %d\n", irq); -} - /* * Find first bit set */ @@ -118,7 +70,7 @@ static int ms1bit(unsigned long x) } /* - * This code is unnecessarily complex, because we do IRQF_DISABLED + * This code is unnecessarily complex, because we do * intr enabling. Basically, once we grab the set of intrs we need * to service, we must mask _all_ these interrupts; firstly, to make * sure the same intr does not intr again, causing recursion that @@ -129,7 +81,7 @@ static int ms1bit(unsigned long x) * Kanoj 05.13.00 */ -static void ip27_do_irq_mask0(struct pt_regs *regs) +static void ip27_do_irq_mask0(void) { int irq, swlevel; hubreg_t pend0, mask0; @@ -149,8 +101,10 @@ static void ip27_do_irq_mask0(struct pt_regs *regs) #ifdef CONFIG_SMP if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ); + scheduler_ipi(); } else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ); + scheduler_ipi(); } else if (pend0 & (1UL << CPU_CALL_A_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ); smp_call_function_interrupt(); @@ -164,13 +118,13 @@ static void ip27_do_irq_mask0(struct pt_regs *regs) struct slice_data *si = cpu_data[cpu].data; irq = si->level_to_irq[swlevel]; - do_IRQ(irq, regs); + do_IRQ(irq); } LOCAL_HUB_L(PI_INT_PEND0); } -static void ip27_do_irq_mask1(struct pt_regs *regs) +static void ip27_do_irq_mask1(void) { int irq, swlevel; hubreg_t pend1, mask1; @@ -190,250 +144,36 @@ static void ip27_do_irq_mask1(struct pt_regs *regs) /* "map" swlevel to irq */ irq = si->level_to_irq[swlevel]; LOCAL_HUB_CLR_INTR(swlevel); - do_IRQ(irq, regs); + do_IRQ(irq); LOCAL_HUB_L(PI_INT_PEND1); } -static void ip27_prof_timer(struct pt_regs *regs) +static void ip27_prof_timer(void) { panic("CPU %d got a profiling interrupt", smp_processor_id()); } -static void ip27_hub_error(struct pt_regs *regs) +static void ip27_hub_error(void) { panic("CPU %d got a hub error interrupt", smp_processor_id()); } -static int intr_connect_level(int cpu, int bit) -{ - nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); - struct slice_data *si = cpu_data[cpu].data; - unsigned long flags; - - set_bit(bit, si->irq_enable_mask); - - local_irq_save(flags); - if (!cputoslice(cpu)) { - REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]); - REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]); - } else { - REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]); - REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]); - } - local_irq_restore(flags); - - return 0; -} - -static int intr_disconnect_level(int cpu, int bit) -{ - nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); - struct slice_data *si = cpu_data[cpu].data; - - clear_bit(bit, si->irq_enable_mask); - - if (!cputoslice(cpu)) { - REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]); - REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]); - } else { - REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]); - REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]); - } - - return 0; -} - -/* Startup one of the (PCI ...) IRQs routes over a bridge. */ -static unsigned int startup_bridge_irq(unsigned int irq) -{ - struct bridge_controller *bc; - bridgereg_t device; - bridge_t *bridge; - int pin, swlevel; - cpuid_t cpu; - - pin = SLOT_FROM_PCI_IRQ(irq); - bc = IRQ_TO_BRIDGE(irq); - bridge = bc->base; - - pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", irq, pin); - /* - * "map" irq to a swlevel greater than 6 since the first 6 bits - * of INT_PEND0 are taken - */ - swlevel = find_level(&cpu, irq); - bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8)); - bridge->b_int_enable |= (1 << pin); - bridge->b_int_enable |= 0x7ffffe00; /* more stuff in int_enable */ - - /* - * Enable sending of an interrupt clear packt to the hub on a high to - * low transition of the interrupt pin. - * - * IRIX sets additional bits in the address which are documented as - * reserved in the bridge docs. - */ - bridge->b_int_mode |= (1UL << pin); - - /* - * We assume the bridge to have a 1:1 mapping between devices - * (slots) and intr pins. - */ - device = bridge->b_int_device; - device &= ~(7 << (pin*3)); - device |= (pin << (pin*3)); - bridge->b_int_device = device; - - bridge->b_wid_tflush; - - return 0; /* Never anything pending. */ -} - -/* Shutdown one of the (PCI ...) IRQs routes over a bridge. */ -static void shutdown_bridge_irq(unsigned int irq) -{ - struct bridge_controller *bc = IRQ_TO_BRIDGE(irq); - struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu)); - bridge_t *bridge = bc->base; - int pin, swlevel; - cpuid_t cpu; - - pr_debug("bridge_shutdown: irq 0x%x\n", irq); - pin = SLOT_FROM_PCI_IRQ(irq); - - /* - * map irq to a swlevel greater than 6 since the first 6 bits - * of INT_PEND0 are taken - */ - swlevel = find_level(&cpu, irq); - intr_disconnect_level(cpu, swlevel); - - __clear_bit(swlevel, hub->irq_alloc_mask); - - bridge->b_int_enable &= ~(1 << pin); - bridge->b_wid_tflush; -} - -static inline void enable_bridge_irq(unsigned int irq) -{ - cpuid_t cpu; - int swlevel; - - swlevel = find_level(&cpu, irq); /* Criminal offence */ - intr_connect_level(cpu, swlevel); -} - -static inline void disable_bridge_irq(unsigned int irq) -{ - cpuid_t cpu; - int swlevel; - - swlevel = find_level(&cpu, irq); /* Criminal offence */ - intr_disconnect_level(cpu, swlevel); -} - -static void mask_and_ack_bridge_irq(unsigned int irq) -{ - disable_bridge_irq(irq); -} - -static void end_bridge_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) && - irq_desc[irq].action) - enable_bridge_irq(irq); -} - -static struct irq_chip bridge_irq_type = { - .typename = "bridge", - .startup = startup_bridge_irq, - .shutdown = shutdown_bridge_irq, - .enable = enable_bridge_irq, - .disable = disable_bridge_irq, - .ack = mask_and_ack_bridge_irq, - .end = end_bridge_irq, -}; - -static unsigned long irq_map[NR_IRQS / BITS_PER_LONG]; - -int allocate_irqno(void) -{ - int irq; - -again: - irq = find_first_zero_bit(irq_map, NR_IRQS); - - if (irq >= NR_IRQS) - return -ENOSPC; - - if (test_and_set_bit(irq, irq_map)) - goto again; - - return irq; -} - -void free_irqno(unsigned int irq) -{ - clear_bit(irq, irq_map); -} - -void __devinit register_bridge_irq(unsigned int irq) -{ - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &bridge_irq_type; -} - -int __devinit request_bridge_irq(struct bridge_controller *bc) -{ - int irq = allocate_irqno(); - int swlevel, cpu; - nasid_t nasid; - - if (irq < 0) - return irq; - - /* - * "map" irq to a swlevel greater than 6 since the first 6 bits - * of INT_PEND0 are taken - */ - cpu = bc->irq_cpu; - swlevel = alloc_level(cpu, irq); - if (unlikely(swlevel < 0)) { - free_irqno(irq); - - return -EAGAIN; - } - - /* Make sure it's not already pending when we connect it. */ - nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); - REMOTE_HUB_CLR_INTR(nasid, swlevel); - - intr_connect_level(cpu, swlevel); - - register_bridge_irq(irq); - - return irq; -} - -extern void ip27_rt_timer_interrupt(struct pt_regs *regs); - -asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(void) { unsigned long pending = read_c0_cause() & read_c0_status(); + extern unsigned int rt_timer_irq; if (pending & CAUSEF_IP4) - ip27_rt_timer_interrupt(regs); + do_IRQ(rt_timer_irq); else if (pending & CAUSEF_IP2) /* PI_INT_PEND_0 or CC_PEND_{A|B} */ - ip27_do_irq_mask0(regs); + ip27_do_irq_mask0(); else if (pending & CAUSEF_IP3) /* PI_INT_PEND_1 */ - ip27_do_irq_mask1(regs); + ip27_do_irq_mask1(); else if (pending & CAUSEF_IP5) - ip27_prof_timer(regs); + ip27_prof_timer(); else if (pending & CAUSEF_IP6) - ip27_hub_error(regs); + ip27_hub_error(); } void __init arch_init_irq(void) |