aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/sgi-ip27/ip27-irq.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sgi-ip27/ip27-irq.c')
-rw-r--r--arch/mips/sgi-ip27/ip27-irq.c223
1 files changed, 4 insertions, 219 deletions
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 6a123ea72de..3fbaef97a1b 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -27,10 +27,8 @@
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
-#include <asm/system.h>
#include <asm/processor.h>
-#include <asm/pci/bridge.h>
#include <asm/sn/addrs.h>
#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
@@ -41,7 +39,7 @@
* Linux has a controller-independent x86 interrupt architecture.
* every controller has a 'controller-template', that is used
* by the main code to do the right thing. Each driver-visible
- * interrupt source is transparently wired to the apropriate
+ * interrupt source is transparently wired to the appropriate
* controller. Thus drivers need not be aware of the
* interrupt-controller.
*
@@ -55,50 +53,6 @@
extern asmlinkage void ip27_irq(void);
-extern struct bridge_controller *irq_to_bridge[];
-extern int irq_to_slot[];
-
-/*
- * use these macros to get the encoded nasid and widget id
- * from the irq value
- */
-#define IRQ_TO_BRIDGE(i) irq_to_bridge[(i)]
-#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i]
-
-static inline int alloc_level(int cpu, int irq)
-{
- struct hub_data *hub = hub_data(cpu_to_node(cpu));
- struct slice_data *si = cpu_data[cpu].data;
- int level;
-
- level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
- if (level >= LEVELS_PER_SLICE)
- panic("Cpu %d flooded with devices\n", cpu);
-
- __set_bit(level, hub->irq_alloc_mask);
- si->level_to_irq[level] = irq;
-
- return level;
-}
-
-static inline int find_level(cpuid_t *cpunum, int irq)
-{
- int cpu, i;
-
- for_each_online_cpu(cpu) {
- struct slice_data *si = cpu_data[cpu].data;
-
- for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
- if (si->level_to_irq[i] == irq) {
- *cpunum = cpu;
-
- return i;
- }
- }
-
- panic("Could not identify cpu/level for irq %d\n", irq);
-}
-
/*
* Find first bit set
*/
@@ -116,7 +70,7 @@ static int ms1bit(unsigned long x)
}
/*
- * This code is unnecessarily complex, because we do IRQF_DISABLED
+ * This code is unnecessarily complex, because we do
* intr enabling. Basically, once we grab the set of intrs we need
* to service, we must mask _all_ these interrupts; firstly, to make
* sure the same intr does not intr again, causing recursion that
@@ -147,8 +101,10 @@ static void ip27_do_irq_mask0(void)
#ifdef CONFIG_SMP
if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
+ scheduler_ipi();
} else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
+ scheduler_ipi();
} else if (pend0 & (1UL << CPU_CALL_A_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
smp_call_function_interrupt();
@@ -203,177 +159,6 @@ static void ip27_hub_error(void)
panic("CPU %d got a hub error interrupt", smp_processor_id());
}
-static int intr_connect_level(int cpu, int bit)
-{
- nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
- struct slice_data *si = cpu_data[cpu].data;
-
- set_bit(bit, si->irq_enable_mask);
-
- if (!cputoslice(cpu)) {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
- } else {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
- }
-
- return 0;
-}
-
-static int intr_disconnect_level(int cpu, int bit)
-{
- nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
- struct slice_data *si = cpu_data[cpu].data;
-
- clear_bit(bit, si->irq_enable_mask);
-
- if (!cputoslice(cpu)) {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
- } else {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
- }
-
- return 0;
-}
-
-/* Startup one of the (PCI ...) IRQs routes over a bridge. */
-static unsigned int startup_bridge_irq(unsigned int irq)
-{
- struct bridge_controller *bc;
- bridgereg_t device;
- bridge_t *bridge;
- int pin, swlevel;
- cpuid_t cpu;
-
- pin = SLOT_FROM_PCI_IRQ(irq);
- bc = IRQ_TO_BRIDGE(irq);
- bridge = bc->base;
-
- pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", irq, pin);
- /*
- * "map" irq to a swlevel greater than 6 since the first 6 bits
- * of INT_PEND0 are taken
- */
- swlevel = find_level(&cpu, irq);
- bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
- bridge->b_int_enable |= (1 << pin);
- bridge->b_int_enable |= 0x7ffffe00; /* more stuff in int_enable */
-
- /*
- * Enable sending of an interrupt clear packt to the hub on a high to
- * low transition of the interrupt pin.
- *
- * IRIX sets additional bits in the address which are documented as
- * reserved in the bridge docs.
- */
- bridge->b_int_mode |= (1UL << pin);
-
- /*
- * We assume the bridge to have a 1:1 mapping between devices
- * (slots) and intr pins.
- */
- device = bridge->b_int_device;
- device &= ~(7 << (pin*3));
- device |= (pin << (pin*3));
- bridge->b_int_device = device;
-
- bridge->b_wid_tflush;
-
- intr_connect_level(cpu, swlevel);
-
- return 0; /* Never anything pending. */
-}
-
-/* Shutdown one of the (PCI ...) IRQs routes over a bridge. */
-static void shutdown_bridge_irq(unsigned int irq)
-{
- struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
- bridge_t *bridge = bc->base;
- int pin, swlevel;
- cpuid_t cpu;
-
- pr_debug("bridge_shutdown: irq 0x%x\n", irq);
- pin = SLOT_FROM_PCI_IRQ(irq);
-
- /*
- * map irq to a swlevel greater than 6 since the first 6 bits
- * of INT_PEND0 are taken
- */
- swlevel = find_level(&cpu, irq);
- intr_disconnect_level(cpu, swlevel);
-
- bridge->b_int_enable &= ~(1 << pin);
- bridge->b_wid_tflush;
-}
-
-static inline void enable_bridge_irq(unsigned int irq)
-{
- cpuid_t cpu;
- int swlevel;
-
- swlevel = find_level(&cpu, irq); /* Criminal offence */
- intr_connect_level(cpu, swlevel);
-}
-
-static inline void disable_bridge_irq(unsigned int irq)
-{
- cpuid_t cpu;
- int swlevel;
-
- swlevel = find_level(&cpu, irq); /* Criminal offence */
- intr_disconnect_level(cpu, swlevel);
-}
-
-static struct irq_chip bridge_irq_type = {
- .name = "bridge",
- .startup = startup_bridge_irq,
- .shutdown = shutdown_bridge_irq,
- .ack = disable_bridge_irq,
- .mask = disable_bridge_irq,
- .mask_ack = disable_bridge_irq,
- .unmask = enable_bridge_irq,
-};
-
-void __devinit register_bridge_irq(unsigned int irq)
-{
- set_irq_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
-}
-
-int __devinit request_bridge_irq(struct bridge_controller *bc)
-{
- int irq = allocate_irqno();
- int swlevel, cpu;
- nasid_t nasid;
-
- if (irq < 0)
- return irq;
-
- /*
- * "map" irq to a swlevel greater than 6 since the first 6 bits
- * of INT_PEND0 are taken
- */
- cpu = bc->irq_cpu;
- swlevel = alloc_level(cpu, irq);
- if (unlikely(swlevel < 0)) {
- free_irqno(irq);
-
- return -EAGAIN;
- }
-
- /* Make sure it's not already pending when we connect it. */
- nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
- REMOTE_HUB_CLR_INTR(nasid, swlevel);
-
- intr_connect_level(cpu, swlevel);
-
- register_bridge_irq(irq);
-
- return irq;
-}
-
asmlinkage void plat_irq_dispatch(void)
{
unsigned long pending = read_c0_cause() & read_c0_status();
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 22:24:02 +0000