1 files changed, 0 insertions, 93 deletions
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
deleted file mode 100644
index f7261628d8a..00000000000
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * The setup file for serial related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2005 PMC-Sierra, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/serial.h>
-#include <linux/serial_8250.h>
-
-#include <msp_prom.h>
-#include <msp_int.h>
-#include <msp_regs.h>
-
-void __init msp_serial_setup(void)
-{
-	char    *s;
-	char    *endp;
-	struct uart_port up;
-	unsigned int uartclk;
-
-	memset(&up, 0, sizeof(up));
-
-	/* Check if clock was specified in environment */
-	s = prom_getenv("uartfreqhz");
-	if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
-		uartclk = MSP_BASE_BAUD;
-	ppfinit("UART clock set to %d\n", uartclk);
-
-	/* Initialize first serial port */
-	up.mapbase      = MSP_UART0_BASE;
-	up.membase      = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
-	up.irq          = MSP_INT_UART0;
-	up.uartclk      = uartclk;
-	up.regshift     = 2;
-	up.iotype       = UPIO_DWAPB; /* UPIO_MEM like */
-	up.flags        = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
-	up.type         = PORT_16550A;
-	up.line         = 0;
-	up.private_data		= (void*)UART0_STATUS_REG;
-	if (early_serial_setup(&up))
-		printk(KERN_ERR "Early serial init of port 0 failed\n");
-
-	/* Initialize the second serial port, if one exists */
-	switch (mips_machtype) {
-		case MACH_MSP4200_EVAL:
-		case MACH_MSP4200_GW:
-		case MACH_MSP4200_FPGA:
-		case MACH_MSP7120_EVAL:
-		case MACH_MSP7120_GW:
-		case MACH_MSP7120_FPGA:
-			/* Enable UART1 on MSP4200 and MSP7120 */
-			*GPIO_CFG2_REG = 0x00002299;
-			break;
-
-		default:
-			return; /* No second serial port, good-bye. */
-	}
-
-	up.mapbase      = MSP_UART1_BASE;
-	up.membase      = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
-	up.irq          = MSP_INT_UART1;
-	up.line         = 1;
-	up.private_data		= (void*)UART1_STATUS_REG;
-	if (early_serial_setup(&up))
-		printk(KERN_ERR "Early serial init of port 1 failed\n");
-}