diff options
Diffstat (limited to 'arch/mips/pci/pci-sb1250.c')
| -rw-r--r-- | arch/mips/pci/pci-sb1250.c | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 7cca3bde59b..fc634aeda4a 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -30,7 +30,6 @@ * kernel mapped memory. Hopefully neither of these should be a huge * problem. */ -#include <linux/config.h> #include <linux/types.h> #include <linux/pci.h> #include <linux/kernel.h> @@ -38,6 +37,7 @@ #include <linux/mm.h> #include <linux/console.h> #include <linux/tty.h> +#include <linux/vt.h> #include <asm/io.h> @@ -50,16 +50,16 @@ * Macros for calculating offsets into config space given a device * structure or dev/fun/reg */ -#define CFGOFFSET(bus,devfn,where) (((bus)<<16) + ((devfn)<<8) + (where)) -#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where) +#define CFGOFFSET(bus, devfn, where) (((bus)<<16) + ((devfn)<<8) + (where)) +#define CFGADDR(bus, devfn, where) CFGOFFSET((bus)->number, (devfn), where) static void *cfg_space; -#define PCI_BUS_ENABLED 1 -#define LDT_BUS_ENABLED 2 -#define PCI_DEVICE_MODE 4 +#define PCI_BUS_ENABLED 1 +#define LDT_BUS_ENABLED 2 +#define PCI_DEVICE_MODE 4 -static int sb1250_bus_status = 0; +static int sb1250_bus_status; #define PCI_BRIDGE_DEVICE 0 #define LDT_BRIDGE_DEVICE 1 @@ -85,7 +85,7 @@ static inline void WRITECFG32(u32 addr, u32 data) *(u32 *) (cfg_space + (addr & ~3)) = data; } -int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return dev->irq; } @@ -208,12 +208,12 @@ struct pci_controller sb1250_controller = { static int __init sb1250_pcibios_init(void) { + void __iomem *io_map_base; uint32_t cmdreg; uint64_t reg; - extern int pci_probe_only; /* CFE will assign PCI resources */ - pci_probe_only = 1; + pci_set_flags(PCI_PROBE_ONLY); /* Avoid ISA compat ranges. */ PCIBIOS_MIN_IO = 0x00008000UL; @@ -229,7 +229,7 @@ static int __init sb1250_pcibios_init(void) /* * See if the PCI bus has been configured by the firmware. */ - reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG)); + reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG)); if (!(reg & M_SYS_PCI_HOST)) { sb1250_bus_status |= PCI_DEVICE_MODE; } else { @@ -239,7 +239,7 @@ static int __init sb1250_pcibios_init(void) PCI_COMMAND)); if (!(cmdreg & PCI_COMMAND_MASTER)) { printk - ("PCI: Skipping PCI probe. Bus is not initialized.\n"); + ("PCI: Skipping PCI probe. Bus is not initialized.\n"); iounmap(cfg_space); return 0; } @@ -254,11 +254,9 @@ static int __init sb1250_pcibios_init(void) * works correctly with most of Linux's drivers. * XXX ehs: Should this happen in PCI Device mode? */ - - set_io_port_base((unsigned long) - ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536)); - isa_slot_offset = (unsigned long) - ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024); + io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); + sb1250_controller.io_map_base = (unsigned long)io_map_base; + set_io_port_base((unsigned long)io_map_base); #ifdef CONFIG_SIBYTE_HAS_LDT /* @@ -285,7 +283,9 @@ static int __init sb1250_pcibios_init(void) register_pci_controller(&sb1250_controller); #ifdef CONFIG_VGA_CONSOLE - take_over_console(&vga_con, 0, MAX_NR_CONSOLES - 1, 1); + console_lock(); + do_take_over_console(&vga_con, 0, MAX_NR_CONSOLES - 1, 1); + console_unlock(); #endif return 0; } |