aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/pci/ops-sni.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/ops-sni.c')
-rw-r--r--arch/mips/pci/ops-sni.c30
1 files changed, 15 insertions, 15 deletions
diff --git a/arch/mips/pci/ops-sni.c b/arch/mips/pci/ops-sni.c
index fa2d2c60f79..35daa7fe657 100644
--- a/arch/mips/pci/ops-sni.c
+++ b/arch/mips/pci/ops-sni.c
@@ -14,8 +14,8 @@
/*
* It seems that on the RM200 only lower 3 bits of the 5 bit PCI device
- * address are decoded. We therefore manually have to reject attempts at
- * reading outside this range. Being on the paranoid side we only do this
+ * address are decoded. We therefore manually have to reject attempts at
+ * reading outside this range. Being on the paranoid side we only do this
* test for bus 0 and hope forwarding and decoding work properly for any
* subordinated busses.
*
@@ -31,8 +31,8 @@ static int set_config_address(unsigned int busno, unsigned int devfn, int reg)
*(volatile u32 *)PCIMT_CONFIG_ADDRESS =
((busno & 0xff) << 16) |
- ((devfn & 0xff) << 8) |
- (reg & 0xfc);
+ ((devfn & 0xff) << 8) |
+ (reg & 0xfc);
return PCIBIOS_SUCCESSFUL;
}
@@ -70,13 +70,13 @@ static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg,
switch (size) {
case 1:
- outb (val, PCIMT_CONFIG_DATA + (reg & 3));
+ outb(val, PCIMT_CONFIG_DATA + (reg & 3));
break;
case 2:
- outw (val, PCIMT_CONFIG_DATA + (reg & 2));
+ outw(val, PCIMT_CONFIG_DATA + (reg & 2));
break;
case 4:
- outl (val, PCIMT_CONFIG_DATA);
+ outl(val, PCIMT_CONFIG_DATA);
break;
}
@@ -93,7 +93,7 @@ static int pcit_set_config_address(unsigned int busno, unsigned int devfn, int r
if ((devfn > 255) || (reg > 255) || (busno > 255))
return PCIBIOS_BAD_REGISTER_NUMBER;
- outl ((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8);
+ outl((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8);
return PCIBIOS_SUCCESSFUL;
}
@@ -108,12 +108,12 @@ static int pcit_read(struct pci_bus *bus, unsigned int devfn, int reg,
* we don't do it, we will get a data bus error
*/
if (bus->number == 0) {
- pcit_set_config_address (0, 0, 0x68);
- outl (inl (0xcfc) | 0xc0000000, 0xcfc);
+ pcit_set_config_address(0, 0, 0x68);
+ outl(inl(0xcfc) | 0xc0000000, 0xcfc);
if ((res = pcit_set_config_address(0, devfn, 0)))
return res;
- outl (0xffffffff, 0xcfc);
- pcit_set_config_address (0, 0, 0x68);
+ outl(0xffffffff, 0xcfc);
+ pcit_set_config_address(0, 0, 0x68);
if (inl(0xcfc) & 0x100000)
return PCIBIOS_DEVICE_NOT_FOUND;
}
@@ -144,13 +144,13 @@ static int pcit_write(struct pci_bus *bus, unsigned int devfn, int reg,
switch (size) {
case 1:
- outb (val, PCIMT_CONFIG_DATA + (reg & 3));
+ outb(val, PCIMT_CONFIG_DATA + (reg & 3));
break;
case 2:
- outw (val, PCIMT_CONFIG_DATA + (reg & 2));
+ outw(val, PCIMT_CONFIG_DATA + (reg & 2));
break;
case 4:
- outl (val, PCIMT_CONFIG_DATA);
+ outl(val, PCIMT_CONFIG_DATA);
break;
}