diff options
Diffstat (limited to 'arch/mips/netlogic/xlp')
| -rw-r--r-- | arch/mips/netlogic/xlp/Makefile | 2 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlp/ahci-init-xlp2.c | 377 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlp/ahci-init.c | 209 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlp/dt.c | 37 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlp/nlm_hal.c | 284 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlp/setup.c | 31 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlp/usb-init-xlp2.c | 88 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlp/wakeup.c | 98 |
8 files changed, 1008 insertions, 118 deletions
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile index ed9a93c0465..be358a8050c 100644 --- a/arch/mips/netlogic/xlp/Makefile +++ b/arch/mips/netlogic/xlp/Makefile @@ -2,3 +2,5 @@ obj-y += setup.o nlm_hal.o cop2-ex.o dt.o obj-$(CONFIG_SMP) += wakeup.o obj-$(CONFIG_USB) += usb-init.o obj-$(CONFIG_USB) += usb-init-xlp2.o +obj-$(CONFIG_SATA_AHCI) += ahci-init.o +obj-$(CONFIG_SATA_AHCI) += ahci-init-xlp2.o diff --git a/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/arch/mips/netlogic/xlp/ahci-init-xlp2.c new file mode 100644 index 00000000000..c83dbf3689e --- /dev/null +++ b/arch/mips/netlogic/xlp/ahci-init-xlp2.c @@ -0,0 +1,377 @@ +/* + * Copyright (c) 2003-2014 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/bitops.h> +#include <linux/pci_ids.h> +#include <linux/nodemask.h> + +#include <asm/cpu.h> +#include <asm/mipsregs.h> + +#include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/mips-extns.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/iomap.h> + +#define SATA_CTL 0x0 +#define SATA_STATUS 0x1 /* Status Reg */ +#define SATA_INT 0x2 /* Interrupt Reg */ +#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */ +#define SATA_BIU_TIMEOUT 0x4 +#define AXIWRSPERRLOG 0x5 +#define AXIRDSPERRLOG 0x6 +#define BiuTimeoutLow 0x7 +#define BiuTimeoutHi 0x8 +#define BiuSlvErLow 0x9 +#define BiuSlvErHi 0xa +#define IO_CONFIG_SWAP_DIS 0xb +#define CR_REG_TIMER 0xc +#define CORE_ID 0xd +#define AXI_SLAVE_OPT1 0xe +#define PHY_MEM_ACCESS 0xf +#define PHY0_CNTRL 0x10 +#define PHY0_STAT 0x11 +#define PHY0_RX_ALIGN 0x12 +#define PHY0_RX_EQ_LO 0x13 +#define PHY0_RX_EQ_HI 0x14 +#define PHY0_BIST_LOOP 0x15 +#define PHY1_CNTRL 0x16 +#define PHY1_STAT 0x17 +#define PHY1_RX_ALIGN 0x18 +#define PHY1_RX_EQ_LO 0x19 +#define PHY1_RX_EQ_HI 0x1a +#define PHY1_BIST_LOOP 0x1b +#define RdExBase 0x1c +#define RdExLimit 0x1d +#define CacheAllocBase 0x1e +#define CacheAllocLimit 0x1f +#define BiuSlaveCmdGstNum 0x20 + +/*SATA_CTL Bits */ +#define SATA_RST_N BIT(0) /* Active low reset sata_core phy */ +#define SataCtlReserve0 BIT(1) +#define M_CSYSREQ BIT(2) /* AXI master low power, not used */ +#define S_CSYSREQ BIT(3) /* AXI slave low power, not used */ +#define P0_CP_DET BIT(8) /* Reserved, bring in from pad */ +#define P0_MP_SW BIT(9) /* Mech Switch */ +#define P0_DISABLE BIT(10) /* disable p0 */ +#define P0_ACT_LED_EN BIT(11) /* Active LED enable */ +#define P0_IRST_HARD_SYNTH BIT(12) /* PHY hard synth reset */ +#define P0_IRST_HARD_TXRX BIT(13) /* PHY lane hard reset */ +#define P0_IRST_POR BIT(14) /* PHY power on reset*/ +#define P0_IPDTXL BIT(15) /* PHY Tx lane dis/power down */ +#define P0_IPDRXL BIT(16) /* PHY Rx lane dis/power down */ +#define P0_IPDIPDMSYNTH BIT(17) /* PHY synthesizer dis/porwer down */ +#define P0_CP_POD_EN BIT(18) /* CP_POD enable */ +#define P0_AT_BYPASS BIT(19) /* P0 address translation by pass */ +#define P1_CP_DET BIT(20) /* Reserved,Cold Detect */ +#define P1_MP_SW BIT(21) /* Mech Switch */ +#define P1_DISABLE BIT(22) /* disable p1 */ +#define P1_ACT_LED_EN BIT(23) /* Active LED enable */ +#define P1_IRST_HARD_SYNTH BIT(24) /* PHY hard synth reset */ +#define P1_IRST_HARD_TXRX BIT(25) /* PHY lane hard reset */ +#define P1_IRST_POR BIT(26) /* PHY power on reset*/ +#define P1_IPDTXL BIT(27) /* PHY Tx lane dis/porwer down */ +#define P1_IPDRXL BIT(28) /* PHY Rx lane dis/porwer down */ +#define P1_IPDIPDMSYNTH BIT(29) /* PHY synthesizer dis/porwer down */ +#define P1_CP_POD_EN BIT(30) +#define P1_AT_BYPASS BIT(31) /* P1 address translation by pass */ + +/* Status register */ +#define M_CACTIVE BIT(0) /* m_cactive, not used */ +#define S_CACTIVE BIT(1) /* s_cactive, not used */ +#define P0_PHY_READY BIT(8) /* phy is ready */ +#define P0_CP_POD BIT(9) /* Cold PowerOn */ +#define P0_SLUMBER BIT(10) /* power mode slumber */ +#define P0_PATIAL BIT(11) /* power mode patial */ +#define P0_PHY_SIG_DET BIT(12) /* phy dignal detect */ +#define P0_PHY_CALI BIT(13) /* phy calibration done */ +#define P1_PHY_READY BIT(16) /* phy is ready */ +#define P1_CP_POD BIT(17) /* Cold PowerOn */ +#define P1_SLUMBER BIT(18) /* power mode slumber */ +#define P1_PATIAL BIT(19) /* power mode patial */ +#define P1_PHY_SIG_DET BIT(20) /* phy dignal detect */ +#define P1_PHY_CALI BIT(21) /* phy calibration done */ + +/* SATA CR_REG_TIMER bits */ +#define CR_TIME_SCALE (0x1000 << 0) + +/* SATA PHY specific registers start and end address */ +#define RXCDRCALFOSC0 0x0065 +#define CALDUTY 0x006e +#define RXDPIF 0x8065 +#define PPMDRIFTMAX_HI 0x80A4 + +#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_sata_pcibase(node) \ + nlm_pcicfg_base(XLP9XX_IO_SATA_OFFSET(node)) +#define nlm_get_sata_regbase(node) \ + (nlm_get_sata_pcibase(node) + 0x100) + +/* SATA PHY config for register block 1 0x0065 .. 0x006e */ +static const u8 sata_phy_config1[] = { + 0xC9, 0xC9, 0x07, 0x07, 0x18, 0x18, 0x01, 0x01, 0x22, 0x00 +}; + +/* SATA PHY config for register block 2 0x0x8065 .. 0x0x80A4 */ +static const u8 sata_phy_config2[] = { + 0xAA, 0x00, 0x4C, 0xC9, 0xC9, 0x07, 0x07, 0x18, + 0x18, 0x05, 0x0C, 0x10, 0x00, 0x10, 0x00, 0xFF, + 0xCF, 0xF7, 0xE1, 0xF5, 0xFD, 0xFD, 0xFF, 0xFF, + 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5, 0xFD, 0xFD, + 0xF5, 0xF5, 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5, + 0xFD, 0xFD, 0xF5, 0xF5, 0xFF, 0xFF, 0xFF, 0xF5, + 0x3F, 0x00, 0x32, 0x00, 0x03, 0x01, 0x05, 0x05, + 0x04, 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x04, +}; + +const int sata_phy_debug = 0; /* set to verify PHY writes */ + +static void sata_clear_glue_reg(u64 regbase, u32 off, u32 bit) +{ + u32 reg_val; + + reg_val = nlm_read_sata_reg(regbase, off); + nlm_write_sata_reg(regbase, off, (reg_val & ~bit)); +} + +static void sata_set_glue_reg(u64 regbase, u32 off, u32 bit) +{ + u32 reg_val; + + reg_val = nlm_read_sata_reg(regbase, off); + nlm_write_sata_reg(regbase, off, (reg_val | bit)); +} + +static void write_phy_reg(u64 regbase, u32 addr, u32 physel, u8 data) +{ + nlm_write_sata_reg(regbase, PHY_MEM_ACCESS, + (1u << 31) | (physel << 24) | (data << 16) | addr); + udelay(850); +} + +static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel) +{ + u32 val; + + nlm_write_sata_reg(regbase, PHY_MEM_ACCESS, + (0 << 31) | (physel << 24) | (0 << 16) | addr); + udelay(850); + val = nlm_read_sata_reg(regbase, PHY_MEM_ACCESS); + return (val >> 16) & 0xff; +} + +static void config_sata_phy(u64 regbase) +{ + u32 port, i, reg; + + for (port = 0; port < 2; port++) { + for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++) + write_phy_reg(regbase, reg, port, sata_phy_config1[i]); + + for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++) + write_phy_reg(regbase, reg, port, sata_phy_config2[i]); + } +} + +static void check_phy_register(u64 regbase, u32 addr, u32 physel, u8 xdata) +{ + u8 data; + + data = read_phy_reg(regbase, addr, physel); + pr_info("PHY read addr = 0x%x physel = %d data = 0x%x %s\n", + addr, physel, data, data == xdata ? "TRUE" : "FALSE"); +} + +static void verify_sata_phy_config(u64 regbase) +{ + u32 port, i, reg; + + for (port = 0; port < 2; port++) { + for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++) + check_phy_register(regbase, reg, port, + sata_phy_config1[i]); + + for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++) + check_phy_register(regbase, reg, port, + sata_phy_config2[i]); + } +} + +static void nlm_sata_firmware_init(int node) +{ + u32 reg_val; + u64 regbase; + int n; + + pr_info("Initializing XLP9XX On-chip AHCI...\n"); + regbase = nlm_get_sata_regbase(node); + + /* Reset port0 */ + sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_POR); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDTXL); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDRXL); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH); + + /* port1 */ + sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_POR); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDTXL); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDRXL); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH); + udelay(300); + + /* Set PHY */ + sata_set_glue_reg(regbase, SATA_CTL, P0_IPDTXL); + sata_set_glue_reg(regbase, SATA_CTL, P0_IPDRXL); + sata_set_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH); + sata_set_glue_reg(regbase, SATA_CTL, P1_IPDTXL); + sata_set_glue_reg(regbase, SATA_CTL, P1_IPDRXL); + sata_set_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH); + + udelay(1000); + sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_POR); + udelay(1000); + sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_POR); + udelay(1000); + + /* setup PHY */ + config_sata_phy(regbase); + if (sata_phy_debug) + verify_sata_phy_config(regbase); + + udelay(1000); + sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX); + sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH); + sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX); + sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH); + udelay(300); + + /* Override reset in serial PHY mode */ + sata_set_glue_reg(regbase, CR_REG_TIMER, CR_TIME_SCALE); + /* Set reset SATA */ + sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N); + sata_set_glue_reg(regbase, SATA_CTL, M_CSYSREQ); + sata_set_glue_reg(regbase, SATA_CTL, S_CSYSREQ); + + pr_debug("Waiting for PHYs to come up.\n"); + n = 10000; + do { + reg_val = nlm_read_sata_reg(regbase, SATA_STATUS); + if ((reg_val & P1_PHY_READY) && (reg_val & P0_PHY_READY)) + break; + udelay(10); + } while (--n > 0); + + if (reg_val & P0_PHY_READY) + pr_info("PHY0 is up.\n"); + else + pr_info("PHY0 is down.\n"); + if (reg_val & P1_PHY_READY) + pr_info("PHY1 is up.\n"); + else + pr_info("PHY1 is down.\n"); + + pr_info("XLP AHCI Init Done.\n"); +} + +static int __init nlm_ahci_init(void) +{ + int node; + + if (!cpu_is_xlp9xx()) + return 0; + for (node = 0; node < NLM_NR_NODES; node++) + if (nlm_node_present(node)) + nlm_sata_firmware_init(node); + return 0; +} + +static void nlm_sata_intr_ack(struct irq_data *data) +{ + u64 regbase; + u32 val; + int node; + + node = data->irq / NLM_IRQS_PER_NODE; + regbase = nlm_get_sata_regbase(node); + val = nlm_read_sata_reg(regbase, SATA_INT); + sata_set_glue_reg(regbase, SATA_INT, val); +} + +static void nlm_sata_fixup_bar(struct pci_dev *dev) +{ + dev->resource[5] = dev->resource[0]; + memset(&dev->resource[0], 0, sizeof(dev->resource[0])); +} + +static void nlm_sata_fixup_final(struct pci_dev *dev) +{ + u32 val; + u64 regbase; + int node; + + /* Find end bridge function to find node */ + node = xlp_socdev_to_node(dev); + regbase = nlm_get_sata_regbase(node); + + /* clear pending interrupts and then enable them */ + val = nlm_read_sata_reg(regbase, SATA_INT); + sata_set_glue_reg(regbase, SATA_INT, val); + + /* Enable only the core interrupt */ + sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1); + + dev->irq = nlm_irq_to_xirq(node, PIC_SATA_IRQ); + nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack); +} + +arch_initcall(nlm_ahci_init); + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA, + nlm_sata_fixup_bar); + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA, + nlm_sata_fixup_final); diff --git a/arch/mips/netlogic/xlp/ahci-init.c b/arch/mips/netlogic/xlp/ahci-init.c new file mode 100644 index 00000000000..a9d0fae0210 --- /dev/null +++ b/arch/mips/netlogic/xlp/ahci-init.c @@ -0,0 +1,209 @@ +/* + * Copyright (c) 2003-2014 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/bitops.h> + +#include <asm/cpu.h> +#include <asm/mipsregs.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/mips-extns.h> + +#define SATA_CTL 0x0 +#define SATA_STATUS 0x1 /* Status Reg */ +#define SATA_INT 0x2 /* Interrupt Reg */ +#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */ +#define SATA_CR_REG_TIMER 0x4 /* PHY Conrol Timer Reg */ +#define SATA_CORE_ID 0x5 /* Core ID Reg */ +#define SATA_AXI_SLAVE_OPT1 0x6 /* AXI Slave Options Reg */ +#define SATA_PHY_LOS_LEV 0x7 /* PHY LOS Level Reg */ +#define SATA_PHY_MULTI 0x8 /* PHY Multiplier Reg */ +#define SATA_PHY_CLK_SEL 0x9 /* Clock Select Reg */ +#define SATA_PHY_AMP1_GEN1 0xa /* PHY Transmit Amplitude Reg 1 */ +#define SATA_PHY_AMP1_GEN2 0xb /* PHY Transmit Amplitude Reg 2 */ +#define SATA_PHY_AMP1_GEN3 0xc /* PHY Transmit Amplitude Reg 3 */ +#define SATA_PHY_PRE1 0xd /* PHY Transmit Preemphasis Reg 1 */ +#define SATA_PHY_PRE2 0xe /* PHY Transmit Preemphasis Reg 2 */ +#define SATA_PHY_PRE3 0xf /* PHY Transmit Preemphasis Reg 3 */ +#define SATA_SPDMODE 0x10 /* Speed Mode Reg */ +#define SATA_REFCLK 0x11 /* Reference Clock Control Reg */ +#define SATA_BYTE_SWAP_DIS 0x12 /* byte swap disable */ + +/*SATA_CTL Bits */ +#define SATA_RST_N BIT(0) +#define PHY0_RESET_N BIT(16) +#define PHY1_RESET_N BIT(17) +#define PHY2_RESET_N BIT(18) +#define PHY3_RESET_N BIT(19) +#define M_CSYSREQ BIT(2) +#define S_CSYSREQ BIT(3) + +/*SATA_STATUS Bits */ +#define P0_PHY_READY BIT(4) +#define P1_PHY_READY BIT(5) +#define P2_PHY_READY BIT(6) +#define P3_PHY_READY BIT(7) + +#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_sata_pcibase(node) \ + nlm_pcicfg_base(XLP_IO_SATA_OFFSET(node)) +/* SATA device specific configuration registers are starts at 0x900 offset */ +#define nlm_get_sata_regbase(node) \ + (nlm_get_sata_pcibase(node) + 0x900) + +static void sata_clear_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit) +{ + uint32_t reg_val; + + reg_val = nlm_read_sata_reg(regbase, off); + nlm_write_sata_reg(regbase, off, (reg_val & ~bit)); +} + +static void sata_set_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit) +{ + uint32_t reg_val; + + reg_val = nlm_read_sata_reg(regbase, off); + nlm_write_sata_reg(regbase, off, (reg_val | bit)); +} + +static void nlm_sata_firmware_init(int node) +{ + uint32_t reg_val; + uint64_t regbase; + int i; + + pr_info("XLP AHCI Initialization started.\n"); + regbase = nlm_get_sata_regbase(node); + + /* Reset SATA */ + sata_clear_glue_reg(regbase, SATA_CTL, SATA_RST_N); + /* Reset PHY */ + sata_clear_glue_reg(regbase, SATA_CTL, + (PHY3_RESET_N | PHY2_RESET_N + | PHY1_RESET_N | PHY0_RESET_N)); + + /* Set SATA */ + sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N); + /* Set PHY */ + sata_set_glue_reg(regbase, SATA_CTL, + (PHY3_RESET_N | PHY2_RESET_N + | PHY1_RESET_N | PHY0_RESET_N)); + + pr_debug("Waiting for PHYs to come up.\n"); + i = 0; + do { + reg_val = nlm_read_sata_reg(regbase, SATA_STATUS); + i++; + } while (((reg_val & 0xF0) != 0xF0) && (i < 10000)); + + for (i = 0; i < 4; i++) { + if (reg_val & (P0_PHY_READY << i)) + pr_info("PHY%d is up.\n", i); + else + pr_info("PHY%d is down.\n", i); + } + + pr_info("XLP AHCI init done.\n"); +} + +static int __init nlm_ahci_init(void) +{ + int node = 0; + int chip = read_c0_prid() & PRID_REV_MASK; + + if (chip == PRID_IMP_NETLOGIC_XLP3XX) + nlm_sata_firmware_init(node); + return 0; +} + +static void nlm_sata_intr_ack(struct irq_data *data) +{ + uint32_t val = 0; + uint64_t regbase; + + regbase = nlm_get_sata_regbase(nlm_nodeid()); + val = nlm_read_sata_reg(regbase, SATA_INT); + sata_set_glue_reg(regbase, SATA_INT, val); +} + +static void nlm_sata_fixup_bar(struct pci_dev *dev) +{ + /* + * The AHCI resource is in BAR 0, move it to + * BAR 5, where it is expected + */ + dev->resource[5] = dev->resource[0]; + memset(&dev->resource[0], 0, sizeof(dev->resource[0])); +} + +static void nlm_sata_fixup_final(struct pci_dev *dev) +{ + uint32_t val; + uint64_t regbase; + int node = 0; /* XLP3XX does not support multi-node */ + + regbase = nlm_get_sata_regbase(node); + + /* clear pending interrupts and then enable them */ + val = nlm_read_sata_reg(regbase, SATA_INT); + sata_set_glue_reg(regbase, SATA_INT, val); + + /* Mask the core interrupt. If all the interrupts + * are enabled there are spurious interrupt flow + * happening, to avoid only enable core interrupt + * mask. + */ + sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1); + + dev->irq = PIC_SATA_IRQ; + nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack); +} + +arch_initcall(nlm_ahci_init); + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA, + nlm_sata_fixup_bar); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA, + nlm_sata_fixup_final); diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c index 88df445dda7..7cc46032b28 100644 --- a/arch/mips/netlogic/xlp/dt.c +++ b/arch/mips/netlogic/xlp/dt.c @@ -39,13 +39,22 @@ #include <linux/of_platform.h> #include <linux/of_device.h> +#include <asm/prom.h> + extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], - __dtb_xlp_fvp_begin[], __dtb_start[]; + __dtb_xlp_fvp_begin[], __dtb_xlp_gvp_begin[]; +static void *xlp_fdt_blob; void __init *xlp_dt_init(void *fdtp) { if (!fdtp) { - switch (current_cpu_data.processor_id & 0xff00) { + switch (current_cpu_data.processor_id & PRID_IMP_MASK) { +#ifdef CONFIG_DT_XLP_GVP + case PRID_IMP_NETLOGIC_XLP9XX: + case PRID_IMP_NETLOGIC_XLP5XX: + fdtp = __dtb_xlp_gvp_begin; + break; +#endif #ifdef CONFIG_DT_XLP_FVP case PRID_IMP_NETLOGIC_XLP2XX: fdtp = __dtb_xlp_fvp_begin; @@ -67,27 +76,19 @@ void __init *xlp_dt_init(void *fdtp) break; } } - initial_boot_params = fdtp; + xlp_fdt_blob = fdtp; return fdtp; } -void __init device_tree_init(void) +void __init xlp_early_init_devtree(void) { - unsigned long base, size; - - if (!initial_boot_params) - return; - - base = virt_to_phys((void *)initial_boot_params); - size = be32_to_cpu(initial_boot_params->totalsize); - - /* Before we do anything, lets reserve the dt blob */ - reserve_bootmem(base, size, BOOTMEM_DEFAULT); - - unflatten_device_tree(); + __dt_setup_arch(xlp_fdt_blob); + strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); +} - /* free the space reserved for the dt blob */ - free_bootmem(base, size); +void __init device_tree_init(void) +{ + unflatten_and_copy_device_tree(); } static struct of_device_id __initdata xlp_ids[] = { diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c index 56c50ba43c9..bc24beb3a42 100644 --- a/arch/mips/netlogic/xlp/nlm_hal.c +++ b/arch/mips/netlogic/xlp/nlm_hal.c @@ -54,13 +54,47 @@ void nlm_node_init(int node) struct nlm_soc_info *nodep; nodep = nlm_get_node(node); + if (node == 0) + nodep->coremask = 1; /* node 0, boot cpu */ nodep->sysbase = nlm_get_sys_regbase(node); nodep->picbase = nlm_get_pic_regbase(node); nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1)); + if (cpu_is_xlp9xx()) + nodep->socbus = xlp9xx_get_socbus(node); + else + nodep->socbus = 0; spin_lock_init(&nodep->piclock); } -int nlm_irq_to_irt(int irq) +static int xlp9xx_irq_to_irt(int irq) +{ + switch (irq) { + case PIC_GPIO_IRQ: + return 12; + case PIC_9XX_XHCI_0_IRQ: + return 114; + case PIC_9XX_XHCI_1_IRQ: + return 115; + case PIC_UART_0_IRQ: + return 133; + case PIC_UART_1_IRQ: + return 134; + case PIC_SATA_IRQ: + return 143; + case PIC_SPI_IRQ: + return 152; + case PIC_MMC_IRQ: + return 153; + case PIC_PCIE_LINK_LEGACY_IRQ(0): + case PIC_PCIE_LINK_LEGACY_IRQ(1): + case PIC_PCIE_LINK_LEGACY_IRQ(2): + case PIC_PCIE_LINK_LEGACY_IRQ(3): + return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE; + } + return -1; +} + +static int xlp_irq_to_irt(int irq) { uint64_t pcibase; int devoff, irt; @@ -74,7 +108,7 @@ int nlm_irq_to_irt(int irq) devoff = XLP_IO_UART1_OFFSET(0); break; case PIC_MMC_IRQ: - devoff = XLP_IO_SD_OFFSET(0); + devoff = XLP_IO_MMC_OFFSET(0); break; case PIC_I2C_0_IRQ: /* I2C will be fixed up */ case PIC_I2C_1_IRQ: @@ -85,6 +119,18 @@ int nlm_irq_to_irt(int irq) else devoff = XLP_IO_I2C0_OFFSET(0); break; + case PIC_SATA_IRQ: + devoff = XLP_IO_SATA_OFFSET(0); + break; + case PIC_GPIO_IRQ: + devoff = XLP_IO_GPIO_OFFSET(0); + break; + case PIC_NAND_IRQ: + devoff = XLP_IO_NAND_OFFSET(0); + break; + case PIC_SPI_IRQ: + devoff = XLP_IO_SPI_OFFSET(0); + break; default: if (cpu_is_xlpii()) { switch (irq) { @@ -135,16 +181,78 @@ int nlm_irq_to_irt(int irq) case PIC_I2C_3_IRQ: irt = irt + 3; break; } - } else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) { + } else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) && + irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) { /* HW bug, PCI IRT entries are bad on early silicon, fix */ - irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ); + irt = PIC_IRT_PCIE_LINK_INDEX(irq - + PIC_PCIE_LINK_LEGACY_IRQ_BASE); } else { irt = -1; } return irt; } -unsigned int nlm_get_core_frequency(int node, int core) +int nlm_irq_to_irt(int irq) +{ + /* return -2 for irqs without 1-1 mapping */ + if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) && irq <= PIC_PCIE_LINK_MSI_IRQ(3)) + return -2; + if (irq >= PIC_PCIE_MSIX_IRQ(0) && irq <= PIC_PCIE_MSIX_IRQ(3)) + return -2; + + if (cpu_is_xlp9xx()) + return xlp9xx_irq_to_irt(irq); + else + return xlp_irq_to_irt(irq); +} + +static unsigned int nlm_xlp2_get_core_frequency(int node, int core) +{ + unsigned int pll_post_div, ctrl_val0, ctrl_val1, denom; + uint64_t num, sysbase, clockbase; + + if (cpu_is_xlp9xx()) { + clockbase = nlm_get_clock_regbase(node); + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_CPU_PLL_CTRL0(core)); + ctrl_val1 = nlm_read_sys_reg(clockbase, + SYS_9XX_CPU_PLL_CTRL1(core)); + } else { + sysbase = nlm_get_node(node)->sysbase; + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_CPU_PLL_CTRL0(core)); + ctrl_val1 = nlm_read_sys_reg(sysbase, + SYS_CPU_PLL_CTRL1(core)); + } + + /* Find PLL post divider value */ + switch ((ctrl_val0 >> 24) & 0x7) { + case 1: + pll_post_div = 2; + break; + case 3: + pll_post_div = 4; + break; + case 7: + pll_post_div = 8; + break; + case 6: + pll_post_div = 16; + break; + case 0: + default: + pll_post_div = 1; + break; + } + + num = 1000000ULL * (400 * 3 + 100 * (ctrl_val1 & 0x3f)); + denom = 3 * pll_post_div; + do_div(num, denom); + + return (unsigned int)num; +} + +static unsigned int nlm_xlp_get_core_frequency(int node, int core) { unsigned int pll_divf, pll_divr, dfs_div, ext_div; unsigned int rstval, dfsval, denom; @@ -152,38 +260,49 @@ unsigned int nlm_get_core_frequency(int node, int core) sysbase = nlm_get_node(node)->sysbase; rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG); - if (cpu_is_xlpii()) { - num = 1000000ULL * (400 * 3 + 100 * (rstval >> 26)); - denom = 3; - } else { - dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE); - pll_divf = ((rstval >> 10) & 0x7f) + 1; - pll_divr = ((rstval >> 8) & 0x3) + 1; - ext_div = ((rstval >> 30) & 0x3) + 1; - dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1; - - num = 800000000ULL * pll_divf; - denom = 3 * pll_divr * ext_div * dfs_div; - } + dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE); + pll_divf = ((rstval >> 10) & 0x7f) + 1; + pll_divr = ((rstval >> 8) & 0x3) + 1; + ext_div = ((rstval >> 30) & 0x3) + 1; + dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1; + + num = 800000000ULL * pll_divf; + denom = 3 * pll_divr * ext_div * dfs_div; do_div(num, denom); + return (unsigned int)num; } -/* Calculate Frequency to the PIC from PLL. - * freq_out = ( ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13 ) / - * ((2^ctrl0[7:5]) * Table(ctrl0[26:24])) +unsigned int nlm_get_core_frequency(int node, int core) +{ + if (cpu_is_xlpii()) + return nlm_xlp2_get_core_frequency(node, core); + else + return nlm_xlp_get_core_frequency(node, core); +} + +/* + * Calculate PIC frequency from PLL registers. + * freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) / + * ((2^ctrl0[7:5]) * Table(ctrl0[26:24])) */ -static unsigned int nlm_2xx_get_pic_frequency(int node) +static unsigned int nlm_xlp2_get_pic_frequency(int node) { - u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div; + u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div, cpu_xlp9xx; u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div; - u64 ref_clk, sysbase, pll_out_freq_num, ref_clk_select; + u64 sysbase, pll_out_freq_num, ref_clk_select, clockbase, ref_clk; sysbase = nlm_get_node(node)->sysbase; + clockbase = nlm_get_clock_regbase(node); + cpu_xlp9xx = cpu_is_xlp9xx(); /* Find ref_clk_base */ - ref_clk_select = - (nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG) >> 18) & 0x3; + if (cpu_xlp9xx) + ref_clk_select = (nlm_read_sys_reg(sysbase, + SYS_9XX_POWER_ON_RESET_CFG) >> 18) & 0x3; + else + ref_clk_select = (nlm_read_sys_reg(sysbase, + SYS_POWER_ON_RESET_CFG) >> 18) & 0x3; switch (ref_clk_select) { case 0: ref_clk = 200000000ULL; @@ -204,30 +323,70 @@ static unsigned int nlm_2xx_get_pic_frequency(int node) } /* Find the clock source PLL device for PIC */ - reg_select = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_SEL) >> 22) & 0x3; - switch (reg_select) { - case 0: - ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0); - ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2); - break; - case 1: - ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(0)); - ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(0)); - break; - case 2: - ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(1)); - ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(1)); - break; - case 3: - ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(2)); - ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(2)); - break; + if (cpu_xlp9xx) { + reg_select = nlm_read_sys_reg(clockbase, + SYS_9XX_CLK_DEV_SEL) & 0x3; + switch (reg_select) { + case 0: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2); + break; + case 1: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(0)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(0)); + break; + case 2: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(1)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(1)); + break; + case 3: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(2)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(2)); + break; + } + } else { + reg_select = (nlm_read_sys_reg(sysbase, + SYS_CLK_DEV_SEL) >> 22) & 0x3; + switch (reg_select) { + case 0: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2); + break; + case 1: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(0)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(0)); + break; + case 2: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(1)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(1)); + break; + case 3: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(2)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(2)); + break; + } } vco_post_div = (ctrl_val0 >> 5) & 0x7; pll_post_div = (ctrl_val0 >> 24) & 0x7; mdiv = ctrl_val2 & 0xff; - fdiv = (ctrl_val2 >> 8) & 0xfff; + fdiv = (ctrl_val2 >> 8) & 0x1fff; /* Find PLL post divider value */ switch (pll_post_div) { @@ -257,7 +416,12 @@ static unsigned int nlm_2xx_get_pic_frequency(int node) do_div(pll_out_freq_num, pll_out_freq_den); /* PIC post divider, which happens after PLL */ - pic_div = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_DIV) >> 22) & 0x3; + if (cpu_xlp9xx) + pic_div = nlm_read_sys_reg(clockbase, + SYS_9XX_CLK_DEV_DIV) & 0x3; + else + pic_div = (nlm_read_sys_reg(sysbase, + SYS_CLK_DEV_DIV) >> 22) & 0x3; do_div(pll_out_freq_num, 1 << pic_div); return pll_out_freq_num; @@ -266,7 +430,7 @@ static unsigned int nlm_2xx_get_pic_frequency(int node) unsigned int nlm_get_pic_frequency(int node) { if (cpu_is_xlpii()) - return nlm_2xx_get_pic_frequency(node); + return nlm_xlp2_get_pic_frequency(node); else return 133333333; } @@ -284,21 +448,33 @@ int xlp_get_dram_map(int n, uint64_t *dram_map) { uint64_t bridgebase, base, lim; uint32_t val; + unsigned int barreg, limreg, xlatreg; int i, node, rv; /* Look only at mapping on Node 0, we don't handle crazy configs */ bridgebase = nlm_get_bridge_regbase(0); rv = 0; for (i = 0; i < 8; i++) { - val = nlm_read_bridge_reg(bridgebase, - BRIDGE_DRAM_NODE_TRANSLN(i)); - node = (val >> 1) & 0x3; - if (n >= 0 && n != node) - continue; - val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_BAR(i)); + if (cpu_is_xlp9xx()) { + barreg = BRIDGE_9XX_DRAM_BAR(i); + limreg = BRIDGE_9XX_DRAM_LIMIT(i); + xlatreg = BRIDGE_9XX_DRAM_NODE_TRANSLN(i); + } else { + barreg = BRIDGE_DRAM_BAR(i); + limreg = BRIDGE_DRAM_LIMIT(i); + xlatreg = BRIDGE_DRAM_NODE_TRANSLN(i); + } + if (n >= 0) { + /* node specified, get node mapping of BAR */ + val = nlm_read_bridge_reg(bridgebase, xlatreg); + node = (val >> 1) & 0x3; + if (n != node) + continue; + } + val = nlm_read_bridge_reg(bridgebase, barreg); val = (val >> 12) & 0xfffff; base = (uint64_t) val << 20; - val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_LIMIT(i)); + val = nlm_read_bridge_reg(bridgebase, limreg); val = (val >> 12) & 0xfffff; if (val == 0) /* BAR not used */ continue; diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c index 76a7131e486..4fdd9fd29d1 100644 --- a/arch/mips/netlogic/xlp/setup.c +++ b/arch/mips/netlogic/xlp/setup.c @@ -51,12 +51,16 @@ uint64_t nlm_io_base; struct nlm_soc_info nlm_nodes[NLM_NR_NODES]; cpumask_t nlm_cpumask = CPU_MASK_CPU0; unsigned int nlm_threads_per_core; +unsigned int xlp_cores_per_node; static void nlm_linux_exit(void) { uint64_t sysbase = nlm_get_node(0)->sysbase; - nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1); + if (cpu_is_xlp9xx()) + nlm_write_sys_reg(sysbase, SYS_9XX_CHIP_RESET, 1); + else + nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1); for ( ; ; ) cpu_wait(); } @@ -92,13 +96,20 @@ static void __init xlp_init_mem_from_bars(void) void __init plat_mem_setup(void) { - panic_timeout = 5; +#ifdef CONFIG_SMP + nlm_wakeup_secondary_cpus(); + + /* update TLB size after waking up threads */ + current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + + register_smp_ops(&nlm_smp_ops); +#endif _machine_restart = (void (*)(char *))nlm_linux_exit; _machine_halt = nlm_linux_exit; pm_power_off = nlm_linux_exit; /* memory and bootargs from DT */ - early_init_devtree(initial_boot_params); + xlp_early_init_devtree(); if (boot_mem_map.nr_map == 0) { pr_info("Using DRAM BARs for memory map.\n"); @@ -110,7 +121,9 @@ void __init plat_mem_setup(void) const char *get_system_type(void) { - switch (read_c0_prid() & 0xff00) { + switch (read_c0_prid() & PRID_IMP_MASK) { + case PRID_IMP_NETLOGIC_XLP9XX: + case PRID_IMP_NETLOGIC_XLP5XX: case PRID_IMP_NETLOGIC_XLP2XX: return "Broadcom XLPII Series"; default: @@ -150,6 +163,10 @@ void __init prom_init(void) void *reset_vec; nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE); + if (cpu_is_xlp9xx()) + xlp_cores_per_node = 32; + else + xlp_cores_per_node = 8; nlm_init_boot_cpu(); xlp_mmu_init(); nlm_node_init(0); @@ -163,11 +180,5 @@ void __init prom_init(void) #ifdef CONFIG_SMP cpumask_setall(&nlm_cpumask); - nlm_wakeup_secondary_cpus(); - - /* update TLB size after waking up threads */ - current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; - - register_smp_ops(&nlm_smp_ops); #endif } diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c index 36e9c22afc4..17ade1ce5df 100644 --- a/arch/mips/netlogic/xlp/usb-init-xlp2.c +++ b/arch/mips/netlogic/xlp/usb-init-xlp2.c @@ -37,6 +37,7 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/pci.h> +#include <linux/pci_ids.h> #include <linux/platform_device.h> #include <linux/irq.h> @@ -83,12 +84,14 @@ #define nlm_read_usb_reg(b, r) nlm_read_reg(b, r) #define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v) -#define nlm_xlpii_get_usb_pcibase(node, inst) \ - nlm_pcicfg_base(XLP2XX_IO_USB_OFFSET(node, inst)) +#define nlm_xlpii_get_usb_pcibase(node, inst) \ + nlm_pcicfg_base(cpu_is_xlp9xx() ? \ + XLP9XX_IO_USB_OFFSET(node, inst) : \ + XLP2XX_IO_USB_OFFSET(node, inst)) #define nlm_xlpii_get_usb_regbase(node, inst) \ (nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) -static void xlpii_usb_ack(struct irq_data *data) +static void xlp2xx_usb_ack(struct irq_data *data) { u64 port_addr; @@ -109,6 +112,29 @@ static void xlpii_usb_ack(struct irq_data *data) nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff); } +static void xlp9xx_usb_ack(struct irq_data *data) +{ + u64 port_addr; + int node, irq; + + /* Find the node and irq on the node */ + irq = data->irq % NLM_IRQS_PER_NODE; + node = data->irq / NLM_IRQS_PER_NODE; + + switch (irq) { + case PIC_9XX_XHCI_0_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(node, 1); + break; + case PIC_9XX_XHCI_1_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(node, 2); + break; + default: + pr_err("No matching USB irq %d node %d!\n", irq, node); + return; + } + nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff); +} + static void nlm_xlpii_usb_hw_reset(int node, int port) { u64 port_addr, xhci_base, pci_base; @@ -178,17 +204,33 @@ static void nlm_xlpii_usb_hw_reset(int node, int port) static int __init nlm_platform_xlpii_usb_init(void) { + int node; + if (!cpu_is_xlpii()) return 0; - pr_info("Initializing 2XX USB Interface\n"); - nlm_xlpii_usb_hw_reset(0, 1); - nlm_xlpii_usb_hw_reset(0, 2); - nlm_xlpii_usb_hw_reset(0, 3); - nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlpii_usb_ack); - nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlpii_usb_ack); - nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlpii_usb_ack); + if (!cpu_is_xlp9xx()) { + /* XLP 2XX single node */ + pr_info("Initializing 2XX USB Interface\n"); + nlm_xlpii_usb_hw_reset(0, 1); + nlm_xlpii_usb_hw_reset(0, 2); + nlm_xlpii_usb_hw_reset(0, 3); + nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlp2xx_usb_ack); + nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlp2xx_usb_ack); + nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlp2xx_usb_ack); + return 0; + } + /* XLP 9XX, multi-node */ + pr_info("Initializing 9XX USB Interface\n"); + for (node = 0; node < NLM_NR_NODES; node++) { + if (!nlm_node_present(node)) + continue; + nlm_xlpii_usb_hw_reset(node, 1); + nlm_xlpii_usb_hw_reset(node, 2); + nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_0_IRQ, xlp9xx_usb_ack); + nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_1_IRQ, xlp9xx_usb_ack); + } return 0; } @@ -196,8 +238,26 @@ arch_initcall(nlm_platform_xlpii_usb_init); static u64 xlp_usb_dmamask = ~(u32)0; -/* Fixup IRQ for USB devices on XLP the SoC PCIe bus */ -static void nlm_usb_fixup_final(struct pci_dev *dev) +/* Fixup the IRQ for USB devices which is exist on XLP9XX SOC PCIE bus */ +static void nlm_xlp9xx_usb_fixup_final(struct pci_dev *dev) +{ + int node; + + node = xlp_socdev_to_node(dev); + dev->dev.dma_mask = &xlp_usb_dmamask; + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + switch (dev->devfn) { + case 0x21: + dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_0_IRQ); + break; + case 0x22: + dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_1_IRQ); + break; + } +} + +/* Fixup the IRQ for USB devices which is exist on XLP2XX SOC PCIE bus */ +static void nlm_xlp2xx_usb_fixup_final(struct pci_dev *dev) { dev->dev.dma_mask = &xlp_usb_dmamask; dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); @@ -214,5 +274,7 @@ static void nlm_usb_fixup_final(struct pci_dev *dev) } } +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_XHCI, + nlm_xlp9xx_usb_fixup_final); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI, - nlm_usb_fixup_final); + nlm_xlp2xx_usb_fixup_final); diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c index 682d5638dc0..e5f44d2605a 100644 --- a/arch/mips/netlogic/xlp/wakeup.c +++ b/arch/mips/netlogic/xlp/wakeup.c @@ -32,7 +32,6 @@ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include <linux/init.h> #include <linux/kernel.h> #include <linux/threads.h> @@ -47,14 +46,14 @@ #include <asm/netlogic/mips-extns.h> #include <asm/netlogic/xlp-hal/iomap.h> -#include <asm/netlogic/xlp-hal/pic.h> #include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/pic.h> #include <asm/netlogic/xlp-hal/sys.h> static int xlp_wakeup_core(uint64_t sysbase, int node, int core) { uint32_t coremask, value; - int count; + int count, resetreg; coremask = (1 << core); @@ -65,12 +64,24 @@ static int xlp_wakeup_core(uint64_t sysbase, int node, int core) nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value); } + /* On 9XX, mark coherent first */ + if (cpu_is_xlp9xx()) { + value = nlm_read_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE); + value &= ~coremask; + nlm_write_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE, value); + } + /* Remove CPU Reset */ - value = nlm_read_sys_reg(sysbase, SYS_CPU_RESET); + resetreg = cpu_is_xlp9xx() ? SYS_9XX_CPU_RESET : SYS_CPU_RESET; + value = nlm_read_sys_reg(sysbase, resetreg); value &= ~coremask; - nlm_write_sys_reg(sysbase, SYS_CPU_RESET, value); + nlm_write_sys_reg(sysbase, resetreg, value); + + /* We are done on 9XX */ + if (cpu_is_xlp9xx()) + return 1; - /* Poll for CPU to mark itself coherent */ + /* Poll for CPU to mark itself coherent on other type of XLP */ count = 100000; do { value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE); @@ -84,7 +95,7 @@ static int wait_for_cpus(int cpu, int bootcpu) volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY); int i, count, notready; - count = 0x20000000; + count = 0x800000; do { notready = nlm_threads_per_core; for (i = 0; i < nlm_threads_per_core; i++) @@ -98,27 +109,66 @@ static int wait_for_cpus(int cpu, int bootcpu) static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask) { struct nlm_soc_info *nodep; - uint64_t syspcibase; - uint32_t syscoremask; + uint64_t syspcibase, fusebase; + uint32_t syscoremask, mask, fusemask; int core, n, cpu; for (n = 0; n < NLM_NR_NODES; n++) { - syspcibase = nlm_get_sys_pcibase(n); - if (nlm_read_reg(syspcibase, 0) == 0xffffffff) - break; + if (n != 0) { + /* check if node exists and is online */ + if (cpu_is_xlp9xx()) { + int b = xlp9xx_get_socbus(n); + pr_info("Node %d SoC PCI bus %d.\n", n, b); + if (b == 0) + break; + } else { + syspcibase = nlm_get_sys_pcibase(n); + if (nlm_read_reg(syspcibase, 0) == 0xffffffff) + break; + } + nlm_node_init(n); + } /* read cores in reset from SYS */ - if (n != 0) - nlm_node_init(n); nodep = nlm_get_node(n); - syscoremask = nlm_read_sys_reg(nodep->sysbase, SYS_CPU_RESET); - /* The boot cpu */ - if (n == 0) { - syscoremask |= 1; - nodep->coremask = 1; + + if (cpu_is_xlp9xx()) { + fusebase = nlm_get_fuse_regbase(n); + fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6); + switch (read_c0_prid() & PRID_IMP_MASK) { + case PRID_IMP_NETLOGIC_XLP5XX: + mask = 0xff; + break; + case PRID_IMP_NETLOGIC_XLP9XX: + default: + mask = 0xfffff; + break; + } + } else { + fusemask = nlm_read_sys_reg(nodep->sysbase, + SYS_EFUSE_DEVICE_CFG_STATUS0); + switch (read_c0_prid() & PRID_IMP_MASK) { + case PRID_IMP_NETLOGIC_XLP3XX: + mask = 0xf; + break; + case PRID_IMP_NETLOGIC_XLP2XX: + mask = 0x3; + break; + case PRID_IMP_NETLOGIC_XLP8XX: + default: + mask = 0xff; + break; + } } - for (core = 0; core < NLM_CORES_PER_NODE; core++) { + /* + * Fused out cores are set in the fusemask, and the remaining + * cores are renumbered to range 0 .. nactive-1 + */ + syscoremask = (1 << hweight32(~fusemask & mask)) - 1; + + pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask); + for (core = 0; core < nlm_cores_per_node(); core++) { /* we will be on node 0 core 0 */ if (n == 0 && core == 0) continue; @@ -128,7 +178,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask) continue; /* see if at least the first hw thread is enabled */ - cpu = (n * NLM_CORES_PER_NODE + core) + cpu = (n * nlm_cores_per_node() + core) * NLM_THREADS_PER_CORE; if (!cpumask_test_cpu(cpu, wakeup_mask)) continue; @@ -141,7 +191,8 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask) nodep->coremask |= 1u << core; /* spin until the hw threads sets their ready */ - wait_for_cpus(cpu, 0); + if (!wait_for_cpus(cpu, 0)) + pr_err("Node %d : timeout core %d\n", n, core); } } } @@ -153,7 +204,8 @@ void xlp_wakeup_secondary_cpus() * first wakeup core 0 threads */ xlp_boot_core0_siblings(); - wait_for_cpus(0, 0); + if (!wait_for_cpus(0, 0)) + pr_err("Node 0 : timeout core 0\n"); /* now get other cores out of reset */ xlp_enable_secondary_cores(&nlm_cpumask); |