diff options
Diffstat (limited to 'arch/mips/mti-sead3')
| -rw-r--r-- | arch/mips/mti-sead3/Makefile | 18 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/leds-sead3.c | 29 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-cmdline.c | 46 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-console.c | 6 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-display.c | 3 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-i2c-drv.c | 28 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-init.c | 135 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-int.c | 1 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-memory.c | 138 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-mtd.c | 3 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-net.c | 4 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-pic32-bus.c | 7 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-pic32-i2c-drv.c | 94 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-reset.c | 5 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-setup.c | 95 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-time.c | 18 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3.dts | 22 |
17 files changed, 306 insertions, 346 deletions
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile index 626afeac438..071786fa234 100644 --- a/arch/mips/mti-sead3/Makefile +++ b/arch/mips/mti-sead3/Makefile @@ -5,11 +5,13 @@ # Copyright (C) 2008 Wind River Systems, Inc. # written by Ralf Baechle <ralf@linux-mips.org> # -obj-y := sead3-lcd.o sead3-cmdline.o \ - sead3-display.o sead3-init.o sead3-int.o \ - sead3-mtd.o sead3-net.o \ - sead3-memory.o sead3-platform.o \ - sead3-reset.o sead3-setup.o sead3-time.o +# Copyright (C) 2012 MIPS Technoligies, Inc. All rights reserved. +# Steven J. Hill <sjhill@mips.com> +# +obj-y := sead3-lcd.o sead3-display.o sead3-init.o \ + sead3-int.o sead3-mtd.o sead3-net.o \ + sead3-platform.o sead3-reset.o \ + sead3-setup.o sead3-time.o obj-y += sead3-i2c-dev.o sead3-i2c.o \ sead3-pic32-i2c-drv.o sead3-pic32-bus.o \ @@ -17,3 +19,9 @@ obj-y += sead3-i2c-dev.o sead3-i2c.o \ obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o obj-$(CONFIG_USB_EHCI_HCD) += sead3-ehci.o +obj-$(CONFIG_OF) += sead3.dtb.o + +CFLAGS_sead3-setup.o = -I$(src)/../../../scripts/dtc/libfdt + +$(obj)/%.dtb: $(obj)/%.dts + $(call if_changed,dtc) diff --git a/arch/mips/mti-sead3/leds-sead3.c b/arch/mips/mti-sead3/leds-sead3.c index a95ac598520..0a168c948b0 100644 --- a/arch/mips/mti-sead3/leds-sead3.c +++ b/arch/mips/mti-sead3/leds-sead3.c @@ -33,34 +33,16 @@ static void sead3_fled_set(struct led_classdev *led_cdev, static struct led_classdev sead3_pled = { .name = "sead3::pled", - .brightness_set = sead3_pled_set, + .brightness_set = sead3_pled_set, + .flags = LED_CORE_SUSPENDRESUME, }; static struct led_classdev sead3_fled = { .name = "sead3::fled", - .brightness_set = sead3_fled_set, + .brightness_set = sead3_fled_set, + .flags = LED_CORE_SUSPENDRESUME, }; -#ifdef CONFIG_PM -static int sead3_led_suspend(struct platform_device *dev, - pm_message_t state) -{ - led_classdev_suspend(&sead3_pled); - led_classdev_suspend(&sead3_fled); - return 0; -} - -static int sead3_led_resume(struct platform_device *dev) -{ - led_classdev_resume(&sead3_pled); - led_classdev_resume(&sead3_fled); - return 0; -} -#else -#define sead3_led_suspend NULL -#define sead3_led_resume NULL -#endif - static int sead3_led_probe(struct platform_device *pdev) { int ret; @@ -86,8 +68,6 @@ static int sead3_led_remove(struct platform_device *pdev) static struct platform_driver sead3_led_driver = { .probe = sead3_led_probe, .remove = sead3_led_remove, - .suspend = sead3_led_suspend, - .resume = sead3_led_resume, .driver = { .name = DRVNAME, .owner = THIS_MODULE, @@ -125,4 +105,3 @@ module_exit(sead3_led_exit); MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>"); MODULE_DESCRIPTION("SEAD3 LED driver"); MODULE_LICENSE("GPL"); - diff --git a/arch/mips/mti-sead3/sead3-cmdline.c b/arch/mips/mti-sead3/sead3-cmdline.c deleted file mode 100644 index a2e6cec67f5..00000000000 --- a/arch/mips/mti-sead3/sead3-cmdline.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. - */ -#include <linux/init.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> - -extern int prom_argc; -extern int *_prom_argv; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension. - */ -#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while (actr < prom_argc) { - strcpy(cp, prom_argv(actr)); - cp += strlen(prom_argv(actr)); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) { - /* get rid of trailing space */ - --cp; - *cp = '\0'; - } -} diff --git a/arch/mips/mti-sead3/sead3-console.c b/arch/mips/mti-sead3/sead3-console.c index b36739108a0..031f47d6977 100644 --- a/arch/mips/mti-sead3/sead3-console.c +++ b/arch/mips/mti-sead3/sead3-console.c @@ -10,8 +10,8 @@ #include <linux/serial_reg.h> #include <linux/io.h> -#define SEAD_UART1_REGS_BASE 0xbf000800 /* ttyS1 = DB9 port */ -#define SEAD_UART0_REGS_BASE 0xbf000900 /* ttyS0 = USB port */ +#define SEAD_UART1_REGS_BASE 0xbf000800 /* ttyS1 = DB9 port */ +#define SEAD_UART0_REGS_BASE 0xbf000900 /* ttyS0 = USB port */ #define PORT(base_addr, offset) ((unsigned int __iomem *)(base_addr+(offset)*4)) static char console_port = 1; @@ -26,7 +26,7 @@ static inline void serial_out(int offset, int value, unsigned int base_addr) __raw_writel(value, PORT(base_addr, offset)); } -void __init prom_init_early_console(char port) +void __init fw_init_early_console(char port) { console_port = port; } diff --git a/arch/mips/mti-sead3/sead3-display.c b/arch/mips/mti-sead3/sead3-display.c index 8308c7fc188..94875991907 100644 --- a/arch/mips/mti-sead3/sead3-display.c +++ b/arch/mips/mti-sead3/sead3-display.c @@ -8,7 +8,6 @@ #include <linux/timer.h> #include <linux/io.h> #include <asm/mips-boards/generic.h> -#include <asm/mips-boards/prom.h> static unsigned int display_count; static unsigned int max_display_count; @@ -21,7 +20,7 @@ static unsigned int max_display_count; #define LCD_SETDDRAM 0x80 #define LCD_IR_BF 0x80 -const char display_string[] = " LINUX ON SEAD3 "; +const char display_string[] = " LINUX ON SEAD3 "; static void scroll_display_message(unsigned long data); static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0); diff --git a/arch/mips/mti-sead3/sead3-i2c-drv.c b/arch/mips/mti-sead3/sead3-i2c-drv.c index 7aa2225e75b..1f787a6a787 100644 --- a/arch/mips/mti-sead3/sead3-i2c-drv.c +++ b/arch/mips/mti-sead3/sead3-i2c-drv.c @@ -13,32 +13,32 @@ #include <linux/platform_device.h> #define PIC32_I2CxCON 0x0000 -#define PIC32_I2CCON_ON (1<<15) -#define PIC32_I2CCON_ACKDT (1<<5) -#define PIC32_I2CCON_ACKEN (1<<4) -#define PIC32_I2CCON_RCEN (1<<3) -#define PIC32_I2CCON_PEN (1<<2) -#define PIC32_I2CCON_RSEN (1<<1) -#define PIC32_I2CCON_SEN (1<<0) +#define PIC32_I2CCON_ON (1<<15) +#define PIC32_I2CCON_ACKDT (1<<5) +#define PIC32_I2CCON_ACKEN (1<<4) +#define PIC32_I2CCON_RCEN (1<<3) +#define PIC32_I2CCON_PEN (1<<2) +#define PIC32_I2CCON_RSEN (1<<1) +#define PIC32_I2CCON_SEN (1<<0) #define PIC32_I2CxCONCLR 0x0004 #define PIC32_I2CxCONSET 0x0008 #define PIC32_I2CxSTAT 0x0010 #define PIC32_I2CxSTATCLR 0x0014 -#define PIC32_I2CSTAT_ACKSTAT (1<<15) -#define PIC32_I2CSTAT_TRSTAT (1<<14) -#define PIC32_I2CSTAT_BCL (1<<10) -#define PIC32_I2CSTAT_IWCOL (1<<7) -#define PIC32_I2CSTAT_I2COV (1<<6) +#define PIC32_I2CSTAT_ACKSTAT (1<<15) +#define PIC32_I2CSTAT_TRSTAT (1<<14) +#define PIC32_I2CSTAT_BCL (1<<10) +#define PIC32_I2CSTAT_IWCOL (1<<7) +#define PIC32_I2CSTAT_I2COV (1<<6) #define PIC32_I2CxBRG 0x0040 #define PIC32_I2CxTRN 0x0050 #define PIC32_I2CxRCV 0x0060 static DEFINE_SPINLOCK(pic32_bus_lock); -static void __iomem *bus_xfer = (void __iomem *)0xbf000600; +static void __iomem *bus_xfer = (void __iomem *)0xbf000600; static void __iomem *bus_status = (void __iomem *)0xbf000060; -#define DELAY() udelay(100) +#define DELAY() udelay(100) static inline unsigned int ioready(void) { diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c index a958cad6fff..bfbd17b120a 100644 --- a/arch/mips/mti-sead3/sead3-init.c +++ b/arch/mips/mti-sead3/sead3-init.c @@ -12,38 +12,51 @@ #include <asm/cacheflush.h> #include <asm/traps.h> #include <asm/mips-boards/generic.h> -#include <asm/mips-boards/prom.h> - -extern void prom_init_early_console(char port); +#include <asm/fw/fw.h> extern char except_vec_nmi; extern char except_vec_ejtag_debug; -int prom_argc; -int *_prom_argv, *_prom_envp; - -#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) - -char *prom_getenv(char *envname) +#ifdef CONFIG_SERIAL_8250_CONSOLE +static void __init console_config(void) { - /* - * Return a pointer to the given environment variable. - * In 64-bit mode: we're using 64-bit pointers, but all pointers - * in the PROM structures are only 32-bit, so we need some - * workarounds, if we are running in 64-bit mode. - */ - int i, index = 0; - - i = strlen(envname); - - while (prom_envp(index)) { - if (strncmp(envname, prom_envp(index), i) == 0) - return prom_envp(index+1); - index += 2; + char console_string[40]; + int baud = 0; + char parity = '\0', bits = '\0', flow = '\0'; + char *s; + + if ((strstr(fw_getcmdline(), "console=")) == NULL) { + s = fw_getenv("modetty0"); + if (s) { + while (*s >= '0' && *s <= '9') + baud = baud*10 + *s++ - '0'; + if (*s == ',') + s++; + if (*s) + parity = *s++; + if (*s == ',') + s++; + if (*s) + bits = *s++; + if (*s == ',') + s++; + if (*s == 'h') + flow = 'r'; + } + if (baud == 0) + baud = 38400; + if (parity != 'n' && parity != 'o' && parity != 'e') + parity = 'n'; + if (bits != '7' && bits != '8') + bits = '8'; + if (flow == '\0') + flow = 'r'; + sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, + parity, bits, flow); + strcat(fw_getcmdline(), console_string); } - - return NULL; } +#endif static void __init mips_nmi_setup(void) { @@ -52,7 +65,41 @@ static void __init mips_nmi_setup(void) base = cpu_has_veic ? (void *)(CAC_BASE + 0xa80) : (void *)(CAC_BASE + 0x380); +#ifdef CONFIG_CPU_MICROMIPS + /* + * Decrement the exception vector address by one for microMIPS. + */ + memcpy(base, (&except_vec_nmi - 1), 0x80); + + /* + * This is a hack. We do not know if the boot loader was built with + * microMIPS instructions or not. If it was not, the NMI exception + * code at 0x80000a80 will be taken in MIPS32 mode. The hand coded + * assembly below forces us into microMIPS mode if we are a pure + * microMIPS kernel. The assembly instructions are: + * + * 3C1A8000 lui k0,0x8000 + * 375A0381 ori k0,k0,0x381 + * 03400008 jr k0 + * 00000000 nop + * + * The mode switch occurs by jumping to the unaligned exception + * vector address at 0x80000381 which would have been 0x80000380 + * in MIPS32 mode. The jump to the unaligned address transitions + * us into microMIPS mode. + */ + if (!cpu_has_veic) { + void *base2 = (void *)(CAC_BASE + 0xa80); + *((unsigned int *)base2) = 0x3c1a8000; + *((unsigned int *)base2 + 1) = 0x375a0381; + *((unsigned int *)base2 + 2) = 0x03400008; + *((unsigned int *)base2 + 3) = 0x00000000; + flush_icache_range((unsigned long)base2, + (unsigned long)base2 + 0x10); + } +#else memcpy(base, &except_vec_nmi, 0x80); +#endif flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); } @@ -63,29 +110,43 @@ static void __init mips_ejtag_setup(void) base = cpu_has_veic ? (void *)(CAC_BASE + 0xa00) : (void *)(CAC_BASE + 0x300); +#ifdef CONFIG_CPU_MICROMIPS + /* Deja vu... */ + memcpy(base, (&except_vec_ejtag_debug - 1), 0x80); + if (!cpu_has_veic) { + void *base2 = (void *)(CAC_BASE + 0xa00); + *((unsigned int *)base2) = 0x3c1a8000; + *((unsigned int *)base2 + 1) = 0x375a0301; + *((unsigned int *)base2 + 2) = 0x03400008; + *((unsigned int *)base2 + 3) = 0x00000000; + flush_icache_range((unsigned long)base2, + (unsigned long)base2 + 0x10); + } +#else memcpy(base, &except_vec_ejtag_debug, 0x80); +#endif flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); } void __init prom_init(void) { - prom_argc = fw_arg0; - _prom_argv = (int *) fw_arg1; - _prom_envp = (int *) fw_arg2; - board_nmi_handler_setup = mips_nmi_setup; board_ejtag_handler_setup = mips_ejtag_setup; - prom_init_cmdline(); - prom_meminit(); + fw_init_cmdline(); #ifdef CONFIG_EARLY_PRINTK - if ((strstr(prom_getcmdline(), "console=ttyS0")) != NULL) - prom_init_early_console(0); - else if ((strstr(prom_getcmdline(), "console=ttyS1")) != NULL) - prom_init_early_console(1); + if ((strstr(fw_getcmdline(), "console=ttyS0")) != NULL) + fw_init_early_console(0); + else if ((strstr(fw_getcmdline(), "console=ttyS1")) != NULL) + fw_init_early_console(1); #endif #ifdef CONFIG_SERIAL_8250_CONSOLE - if ((strstr(prom_getcmdline(), "console=")) == NULL) - strcat(prom_getcmdline(), " console=ttyS0,38400n8r"); + if ((strstr(fw_getcmdline(), "console=")) == NULL) + strcat(fw_getcmdline(), " console=ttyS0,38400n8r"); + console_config(); #endif } + +void prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c index e26e08274fc..6a560ac03de 100644 --- a/arch/mips/mti-sead3/sead3-int.c +++ b/arch/mips/mti-sead3/sead3-int.c @@ -20,7 +20,6 @@ #define SEAD_CONFIG_BASE 0x1b100110 #define SEAD_CONFIG_SIZE 4 -int gic_present; static unsigned long sead3_config_reg; /* diff --git a/arch/mips/mti-sead3/sead3-memory.c b/arch/mips/mti-sead3/sead3-memory.c deleted file mode 100644 index da9244106f8..00000000000 --- a/arch/mips/mti-sead3/sead3-memory.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. - */ -#include <linux/bootmem.h> - -#include <asm/bootinfo.h> -#include <asm/sections.h> -#include <asm/mips-boards/prom.h> - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; - -static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; - -/* determined physical memory size, not overridden by command line args */ -unsigned long physical_memsize = 0L; - -struct prom_pmemblock * __init prom_getmdesc(void) -{ - char *memsize_str, *ptr; - unsigned int memsize; - static char cmdline[COMMAND_LINE_SIZE] __initdata; - long val; - int tmp; - - /* otherwise look in the environment */ - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - pr_warn("memsize not set in boot prom, set to default 32Mb\n"); - physical_memsize = 0x02000000; - } else { - tmp = kstrtol(memsize_str, 0, &val); - physical_memsize = (unsigned long)val; - } - -#ifdef CONFIG_CPU_BIG_ENDIAN - /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last - word of physical memory */ - physical_memsize -= PAGE_SIZE; -#endif - - /* Check the command line for a memsize directive that overrides - the physical/default amount */ - strcpy(cmdline, arcs_cmdline); - ptr = strstr(cmdline, "memsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " memsize="); - - if (ptr) - memsize = memparse(ptr + 8, &ptr); - else - memsize = physical_memsize; - - memset(mdesc, 0, sizeof(mdesc)); - - mdesc[0].type = yamon_dontuse; - mdesc[0].base = 0x00000000; - mdesc[0].size = 0x00001000; - - mdesc[1].type = yamon_prom; - mdesc[1].base = 0x00001000; - mdesc[1].size = 0x000ef000; - - /* - * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the - * south bridge and PCI access always forwarded to the ISA Bus and - * BIOSCS# is always generated. - * This mean that this area can't be used as DMA memory for PCI - * devices. - */ - mdesc[2].type = yamon_dontuse; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; - - mdesc[3].type = yamon_dontuse; - mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - - mdesc[3].base; - - mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); - mdesc[4].size = memsize - mdesc[4].base; - - return &mdesc[0]; -} - -static int __init prom_memtype_classify(unsigned int type) -{ - switch (type) { - case yamon_free: - return BOOT_MEM_RAM; - case yamon_prom: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - -void __init prom_meminit(void) -{ - struct prom_pmemblock *p; - - p = prom_getmdesc(); - - while (p->size) { - long type; - unsigned long base, size; - - type = prom_memtype_classify(p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - } -} - -void __init prom_free_prom_memory(void) -{ - unsigned long addr; - int i; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) - continue; - - addr = boot_mem_map.map[i].addr; - free_init_pages("prom memory", - addr, addr + boot_mem_map.map[i].size); - } -} diff --git a/arch/mips/mti-sead3/sead3-mtd.c b/arch/mips/mti-sead3/sead3-mtd.c index ffa35f50978..f9c890d7267 100644 --- a/arch/mips/mti-sead3/sead3-mtd.c +++ b/arch/mips/mti-sead3/sead3-mtd.c @@ -50,5 +50,4 @@ static int __init sead3_mtd_init(void) return 0; } - -module_init(sead3_mtd_init) +device_initcall(sead3_mtd_init); diff --git a/arch/mips/mti-sead3/sead3-net.c b/arch/mips/mti-sead3/sead3-net.c index 04d704df609..dd11e7eb771 100644 --- a/arch/mips/mti-sead3/sead3-net.c +++ b/arch/mips/mti-sead3/sead3-net.c @@ -19,8 +19,8 @@ static struct smsc911x_platform_config sead3_smsc911x_data = { struct resource sead3_net_resourcess[] = { { - .start = 0x1f010000, - .end = 0x1f01ffff, + .start = 0x1f010000, + .end = 0x1f01ffff, .flags = IORESOURCE_MEM }, { diff --git a/arch/mips/mti-sead3/sead3-pic32-bus.c b/arch/mips/mti-sead3/sead3-pic32-bus.c index 9f0d89bc800..3b12aa5a7c8 100644 --- a/arch/mips/mti-sead3/sead3-pic32-bus.c +++ b/arch/mips/mti-sead3/sead3-pic32-bus.c @@ -8,7 +8,6 @@ #include <linux/delay.h> #include <linux/kernel.h> #include <linux/spinlock.h> -#include <linux/init.h> #include <linux/io.h> #include <linux/errno.h> @@ -17,16 +16,16 @@ #define PIC32_SYSRD 0x02 #define PIC32_WR 0x10 #define PIC32_SYSWR 0x20 -#define PIC32_IRQ_CLR 0x40 +#define PIC32_IRQ_CLR 0x40 #define PIC32_STATUS 0x80 -#define DELAY() udelay(100) /* FIXME: needed? */ +#define DELAY() udelay(100) /* FIXME: needed? */ /* spinlock to ensure atomic access to PIC32 */ static DEFINE_SPINLOCK(pic32_bus_lock); /* FIXME: io_remap these */ -static void __iomem *bus_xfer = (void __iomem *)0xbf000600; +static void __iomem *bus_xfer = (void __iomem *)0xbf000600; static void __iomem *bus_status = (void __iomem *)0xbf000060; static inline unsigned int ioready(void) diff --git a/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c b/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c index 514675ed0cd..80fe194cfa5 100644 --- a/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c +++ b/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c @@ -19,40 +19,40 @@ #define PIC32_I2CxCONCLR 0x0004 #define PIC32_I2CxCONSET 0x0008 #define PIC32_I2CxCONINV 0x000C -#define I2CCON_ON (1<<15) -#define I2CCON_FRZ (1<<14) -#define I2CCON_SIDL (1<<13) -#define I2CCON_SCLREL (1<<12) -#define I2CCON_STRICT (1<<11) -#define I2CCON_A10M (1<<10) -#define I2CCON_DISSLW (1<<9) -#define I2CCON_SMEN (1<<8) -#define I2CCON_GCEN (1<<7) -#define I2CCON_STREN (1<<6) -#define I2CCON_ACKDT (1<<5) -#define I2CCON_ACKEN (1<<4) -#define I2CCON_RCEN (1<<3) -#define I2CCON_PEN (1<<2) -#define I2CCON_RSEN (1<<1) -#define I2CCON_SEN (1<<0) +#define I2CCON_ON (1<<15) +#define I2CCON_FRZ (1<<14) +#define I2CCON_SIDL (1<<13) +#define I2CCON_SCLREL (1<<12) +#define I2CCON_STRICT (1<<11) +#define I2CCON_A10M (1<<10) +#define I2CCON_DISSLW (1<<9) +#define I2CCON_SMEN (1<<8) +#define I2CCON_GCEN (1<<7) +#define I2CCON_STREN (1<<6) +#define I2CCON_ACKDT (1<<5) +#define I2CCON_ACKEN (1<<4) +#define I2CCON_RCEN (1<<3) +#define I2CCON_PEN (1<<2) +#define I2CCON_RSEN (1<<1) +#define I2CCON_SEN (1<<0) #define PIC32_I2CxSTAT 0x0010 #define PIC32_I2CxSTATCLR 0x0014 #define PIC32_I2CxSTATSET 0x0018 #define PIC32_I2CxSTATINV 0x001C -#define I2CSTAT_ACKSTAT (1<<15) -#define I2CSTAT_TRSTAT (1<<14) -#define I2CSTAT_BCL (1<<10) -#define I2CSTAT_GCSTAT (1<<9) -#define I2CSTAT_ADD10 (1<<8) -#define I2CSTAT_IWCOL (1<<7) -#define I2CSTAT_I2COV (1<<6) -#define I2CSTAT_DA (1<<5) -#define I2CSTAT_P (1<<4) -#define I2CSTAT_S (1<<3) -#define I2CSTAT_RW (1<<2) -#define I2CSTAT_RBF (1<<1) -#define I2CSTAT_TBF (1<<0) +#define I2CSTAT_ACKSTAT (1<<15) +#define I2CSTAT_TRSTAT (1<<14) +#define I2CSTAT_BCL (1<<10) +#define I2CSTAT_GCSTAT (1<<9) +#define I2CSTAT_ADD10 (1<<8) +#define I2CSTAT_IWCOL (1<<7) +#define I2CSTAT_I2COV (1<<6) +#define I2CSTAT_DA (1<<5) +#define I2CSTAT_P (1<<4) +#define I2CSTAT_S (1<<3) +#define I2CSTAT_RW (1<<2) +#define I2CSTAT_RBF (1<<1) +#define I2CSTAT_TBF (1<<0) #define PIC32_I2CxADD 0x0020 #define PIC32_I2CxADDCLR 0x0024 @@ -312,16 +312,13 @@ static int i2c_platform_probe(struct platform_device *pdev) pr_debug("i2c_platform_probe\n"); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - ret = -ENODEV; - goto out; - } + if (!r) + return -ENODEV; - priv = kzalloc(sizeof(struct i2c_platform_data), GFP_KERNEL); - if (!priv) { - ret = -ENOMEM; - goto out; - } + priv = devm_kzalloc(&pdev->dev, sizeof(struct i2c_platform_data), + GFP_KERNEL); + if (!priv) + return -ENOMEM; /* FIXME: need to allocate resource in PIC32 space */ #if 0 @@ -330,10 +327,8 @@ static int i2c_platform_probe(struct platform_device *pdev) #else priv->base = r->start; #endif - if (!priv->base) { - ret = -EBUSY; - goto out_mem; - } + if (!priv->base) + return -EBUSY; priv->xfer_timeout = 200; priv->ack_timeout = 200; @@ -348,17 +343,13 @@ static int i2c_platform_probe(struct platform_device *pdev) i2c_platform_setup(priv); ret = i2c_add_numbered_adapter(&priv->adap); - if (ret == 0) { - platform_set_drvdata(pdev, priv); - return 0; + if (ret) { + i2c_platform_disable(priv); + return ret; } - i2c_platform_disable(priv); - -out_mem: - kfree(priv); -out: - return ret; + platform_set_drvdata(pdev, priv); + return 0; } static int i2c_platform_remove(struct platform_device *pdev) @@ -369,7 +360,6 @@ static int i2c_platform_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); i2c_del_adapter(&priv->adap); i2c_platform_disable(priv); - kfree(priv); return 0; } diff --git a/arch/mips/mti-sead3/sead3-reset.c b/arch/mips/mti-sead3/sead3-reset.c index 20475c5e7b9..e6fb24414a7 100644 --- a/arch/mips/mti-sead3/sead3-reset.c +++ b/arch/mips/mti-sead3/sead3-reset.c @@ -9,7 +9,9 @@ #include <linux/pm.h> #include <asm/reboot.h> -#include <asm/mips-boards/generic.h> + +#define SOFTRES_REG 0x1f000050 +#define GORESET 0x4d static void mips_machine_restart(char *command) { @@ -35,5 +37,4 @@ static int __init mips_reboot_setup(void) return 0; } - arch_initcall(mips_reboot_setup); diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c index 8ad46ad31b4..e43f4801a24 100644 --- a/arch/mips/mti-sead3/sead3-setup.c +++ b/arch/mips/mti-sead3/sead3-setup.c @@ -4,17 +4,108 @@ * for more details. * * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Imagination Technologies Ltd. */ #include <linux/init.h> +#include <linux/libfdt.h> +#include <linux/of_platform.h> +#include <linux/of_fdt.h> -int coherentio; /* 0 => no DMA cache coherency (may be set by user) */ -int hw_coherentio; /* 0 => no HW DMA cache coherency (reflects real HW) */ +#include <asm/prom.h> +#include <asm/fw/fw.h> + +#include <asm/mips-boards/generic.h> const char *get_system_type(void) { return "MIPS SEAD3"; } +static uint32_t get_memsize_from_cmdline(void) +{ + int memsize = 0; + char *p = arcs_cmdline; + char *s = "memsize="; + + p = strstr(p, s); + if (p) { + p += strlen(s); + memsize = memparse(p, NULL); + } + + return memsize; +} + +static uint32_t get_memsize_from_env(void) +{ + int memsize = 0; + char *p; + + p = fw_getenv("memsize"); + if (p) + memsize = memparse(p, NULL); + + return memsize; +} + +static uint32_t get_memsize(void) +{ + uint32_t memsize; + + memsize = get_memsize_from_cmdline(); + if (memsize) + return memsize; + + return get_memsize_from_env(); +} + +static void __init parse_memsize_param(void) +{ + int offset; + const uint64_t *prop_value; + int prop_len; + uint32_t memsize = get_memsize(); + + if (!memsize) + return; + + offset = fdt_path_offset(__dtb_start, "/memory"); + if (offset > 0) { + uint64_t new_value; + /* + * reg contains 2 32-bits BE values, offset and size. We just + * want to replace the size value without affecting the offset + */ + prop_value = fdt_getprop(__dtb_start, offset, "reg", &prop_len); + new_value = be64_to_cpu(*prop_value); + new_value = (new_value & ~0xffffffffllu) | memsize; + fdt_setprop_inplace_u64(__dtb_start, offset, "reg", new_value); + } +} + void __init plat_mem_setup(void) { + /* allow command line/bootloader env to override memory size in DT */ + parse_memsize_param(); + + /* + * Load the builtin devicetree. This causes the chosen node to be + * parsed resulting in our memory appearing + */ + __dt_setup_arch(__dtb_start); +} + +void __init device_tree_init(void) +{ + if (!initial_boot_params) + return; + + unflatten_and_copy_device_tree(); +} + +static int __init customize_machine(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + return 0; } +arch_initcall(customize_machine); diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c index 048e781a17a..678d03d53c6 100644 --- a/arch/mips/mti-sead3/sead3-time.c +++ b/arch/mips/mti-sead3/sead3-time.c @@ -7,13 +7,11 @@ */ #include <linux/init.h> +#include <asm/cpu.h> #include <asm/setup.h> #include <asm/time.h> #include <asm/irq.h> #include <asm/mips-boards/generic.h> -#include <asm/mips-boards/prom.h> - -unsigned long cpu_khz; static int mips_cpu_timer_irq; static int mips_cpu_perf_irq; @@ -35,7 +33,7 @@ static void __iomem *status_reg = (void __iomem *)0xbf000410; */ static unsigned int __init estimate_cpu_frequency(void) { - unsigned int prid = read_c0_prid() & 0xffff00; + unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK); unsigned int tick = 0; unsigned int freq; unsigned int orig; @@ -43,11 +41,11 @@ static unsigned int __init estimate_cpu_frequency(void) local_irq_save(flags); - orig = readl(status_reg) & 0x2; /* get original sample */ + orig = readl(status_reg) & 0x2; /* get original sample */ /* wait for transition */ while ((readl(status_reg) & 0x2) == orig) ; - orig = orig ^ 0x2; /* flip the bit */ + orig = orig ^ 0x2; /* flip the bit */ write_c0_count(0); @@ -56,7 +54,7 @@ static unsigned int __init estimate_cpu_frequency(void) /* wait for transition */ while ((readl(status_reg) & 0x2) == orig) ; - orig = orig ^ 0x2; /* flip the bit */ + orig = orig ^ 0x2; /* flip the bit */ tick++; } @@ -71,7 +69,7 @@ static unsigned int __init estimate_cpu_frequency(void) (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) freq *= 2; - freq += 5000; /* rounding */ + freq += 5000; /* rounding */ freq -= freq%10000; return freq ; @@ -92,7 +90,7 @@ static void __init plat_perf_setup(void) } } -unsigned int __cpuinit get_c0_compare_int(void) +unsigned int get_c0_compare_int(void) { if (cpu_has_vint) set_vi_handler(cp0_compare_irq, mips_timer_dispatch); @@ -109,8 +107,6 @@ void __init plat_time_init(void) pr_debug("CPU frequency %d.%02d MHz\n", (est_freq / 1000000), (est_freq % 1000000) * 100 / 1000000); - cpu_khz = est_freq / 1000; - mips_scroll_message(); plat_perf_setup(); diff --git a/arch/mips/mti-sead3/sead3.dts b/arch/mips/mti-sead3/sead3.dts new file mode 100644 index 00000000000..e4b317d414f --- /dev/null +++ b/arch/mips/mti-sead3/sead3.dts @@ -0,0 +1,22 @@ +/dts-v1/; + +/memreserve/ 0x00000000 0x00001000; // reserved +/memreserve/ 0x00001000 0x000ef000; // ROM data +/memreserve/ 0x000f0000 0x004cc000; // reserved + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mti,sead-3"; + + cpus { + cpu@0 { + compatible = "mti,mips14KEc", "mti,mips14Kc"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; |