diff options
Diffstat (limited to 'arch/mips/mips-boards')
21 files changed, 0 insertions, 2363 deletions
diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile deleted file mode 100644 index d8dab75906b..00000000000 --- a/arch/mips/mips-boards/atlas/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# - -obj-y := atlas_int.o atlas_setup.o -obj-$(CONFIG_KGDB) += atlas_gdb.o diff --git a/arch/mips/mips-boards/atlas/atlas_gdb.c b/arch/mips/mips-boards/atlas/atlas_gdb.c deleted file mode 100644 index fb65280f178..00000000000 --- a/arch/mips/mips-boards/atlas/atlas_gdb.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include <asm/io.h> -#include <asm/mips-boards/atlas.h> -#include <asm/mips-boards/saa9730_uart.h> - -#define INB(a) inb((unsigned long)a) -#define OUTB(x,a) outb(x,(unsigned long)a) - -/* - * This is the interface to the remote debugger stub - * if the Philips part is used for the debug port, - * called from the platform setup code. - */ -void *saa9730_base = (void *)ATLAS_SAA9730_REG; - -static int saa9730_kgdb_active = 0; - -#define SAA9730_BAUDCLOCK(baud) (((ATLAS_SAA9730_BAUDCLOCK/(baud))/16)-1) - -int saa9730_kgdb_hook(int speed) -{ - int baudclock; - t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR); - - /* - * Clear all interrupts - */ - (void) INB(&kgdb_uart->Lsr); - (void) INB(&kgdb_uart->Msr); - (void) INB(&kgdb_uart->Thr_Rbr); - (void) INB(&kgdb_uart->Iir_Fcr); - - /* - * Now, initialize the UART - */ - /* 8 data bits, one stop bit, no parity */ - OUTB(SAA9730_LCR_DATA8, &kgdb_uart->Lcr); - - baudclock = SAA9730_BAUDCLOCK(speed); - - OUTB((baudclock >> 16) & 0xff, &kgdb_uart->BaudDivMsb); - OUTB( baudclock & 0xff, &kgdb_uart->BaudDivLsb); - - /* Set RTS/DTR active */ - OUTB(SAA9730_MCR_DTR | SAA9730_MCR_RTS, &kgdb_uart->Mcr); - saa9730_kgdb_active = 1; - - return speed; -} - -int saa9730_putDebugChar(char c) -{ - t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR); - - if (!saa9730_kgdb_active) { /* need to init device first */ - return 0; - } - - while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_THRE)) - ; - OUTB(c, &kgdb_uart->Thr_Rbr); - - return 1; -} - -char saa9730_getDebugChar(void) -{ - t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR); - char c; - - if (!saa9730_kgdb_active) { /* need to init device first */ - return 0; - } - while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_DR)) - ; - - c = INB(&kgdb_uart->Thr_Rbr); - return(c); -} diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c deleted file mode 100644 index 8f1d875217a..00000000000 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Routines for generic manipulation of the interrupts found on the MIPS - * Atlas board. - * - */ -#include <linux/compiler.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> - -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/mips-boards/atlas.h> -#include <asm/mips-boards/atlasint.h> -#include <asm/gdb-stub.h> - - -static struct atlas_ictrl_regs *atlas_hw0_icregs; - -extern asmlinkage void mipsIRQ(void); - -#if 0 -#define DEBUG_INT(x...) printk(x) -#else -#define DEBUG_INT(x...) -#endif - -void disable_atlas_irq(unsigned int irq_nr) -{ - atlas_hw0_icregs->intrsten = (1 << (irq_nr-ATLASINT_BASE)); - iob(); -} - -void enable_atlas_irq(unsigned int irq_nr) -{ - atlas_hw0_icregs->intseten = (1 << (irq_nr-ATLASINT_BASE)); - iob(); -} - -static unsigned int startup_atlas_irq(unsigned int irq) -{ - enable_atlas_irq(irq); - return 0; /* never anything pending */ -} - -#define shutdown_atlas_irq disable_atlas_irq - -#define mask_and_ack_atlas_irq disable_atlas_irq - -static void end_atlas_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_atlas_irq(irq); -} - -static struct hw_interrupt_type atlas_irq_type = { - "Atlas", - startup_atlas_irq, - shutdown_atlas_irq, - enable_atlas_irq, - disable_atlas_irq, - mask_and_ack_atlas_irq, - end_atlas_irq, - NULL -}; - -static inline int ls1bit32(unsigned int x) -{ - int b = 31, s; - - s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s; - s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s; - s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s; - s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s; - s = 1; if (x << 1 == 0) s = 0; b -= s; - - return b; -} - -void atlas_hw0_irqdispatch(struct pt_regs *regs) -{ - unsigned long int_status; - int irq; - - int_status = atlas_hw0_icregs->intstatus; - - /* if int_status == 0, then the interrupt has already been cleared */ - if (unlikely(int_status == 0)) - return; - - irq = ATLASINT_BASE + ls1bit32(int_status); - - DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq); - - do_IRQ(irq, regs); -} - -void __init arch_init_irq(void) -{ - int i; - - atlas_hw0_icregs = (struct atlas_ictrl_regs *)ioremap (ATLAS_ICTRL_REGS_BASE, sizeof(struct atlas_ictrl_regs *)); - - /* - * Mask out all interrupt by writing "1" to all bit position in - * the interrupt reset reg. - */ - atlas_hw0_icregs->intrsten = 0xffffffff; - - /* Now safe to set the exception vector. */ - set_except_vector(0, mipsIRQ); - - for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = 0; - irq_desc[i].depth = 1; - irq_desc[i].handler = &atlas_irq_type; - spin_lock_init(&irq_desc[i].lock); - } -} diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c deleted file mode 100644 index 0a1dd9bbc02..00000000000 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/tty.h> -#include <linux/serial.h> -#include <linux/serial_core.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mips-boards/generic.h> -#include <asm/mips-boards/prom.h> -#include <asm/mips-boards/atlas.h> -#include <asm/mips-boards/atlasint.h> -#include <asm/time.h> -#include <asm/traps.h> - -extern void mips_reboot_setup(void); -extern void mips_time_init(void); -extern void mips_timer_setup(struct irqaction *irq); -extern unsigned long mips_rtc_get_time(void); - -#ifdef CONFIG_KGDB -extern void kgdb_config(void); -#endif - -static void __init serial_init(void); - -const char *get_system_type(void) -{ - return "MIPS Atlas"; -} - -static int __init atlas_setup(void) -{ - ioport_resource.end = 0x7fffffff; - - serial_init (); - -#ifdef CONFIG_KGDB - kgdb_config(); -#endif - mips_reboot_setup(); - - board_time_init = mips_time_init; - board_timer_setup = mips_timer_setup; - rtc_get_time = mips_rtc_get_time; - - return 0; -} - -early_initcall(atlas_setup); - -static void __init serial_init(void) -{ -#ifdef CONFIG_SERIAL_8250 - struct uart_port s; - - memset(&s, 0, sizeof(s)); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - s.iobase = ATLAS_UART_REGS_BASE; -#else - s.iobase = ATLAS_UART_REGS_BASE+3; -#endif - s.irq = ATLASINT_UART; - s.uartclk = ATLAS_BASE_BAUD * 16; - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - s.iotype = SERIAL_IO_PORT; - s.regshift = 3; - - if (early_serial_setup(&s) != 0) { - printk(KERN_ERR "Serial setup failed!\n"); - } -#endif -} diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile deleted file mode 100644 index b21bc6887fa..00000000000 --- a/arch/mips/mips-boards/generic/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# Makefile for the MIPS boards generic routines under Linux. -# - -obj-y := mipsIRQ.o reset.o display.o init.o memory.o \ - printf.o cmdline.o time.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += gdb_hook.o - -EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/mips-boards/generic/cmdline.c b/arch/mips/mips-boards/generic/cmdline.c deleted file mode 100644 index 1871c30ed2e..00000000000 --- a/arch/mips/mips-boards/generic/cmdline.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Kernel command line creation using the prom monitor (YAMON) argc/argv. - */ -#include <linux/init.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> - -extern int prom_argc; -extern int *_prom_argv; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension. - */ -#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv(actr)); - cp += strlen(prom_argv(actr)); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) { - /* get rid of trailing space */ - --cp; - *cp = '\0'; - } -} diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c deleted file mode 100644 index f653946afc2..00000000000 --- a/arch/mips/mips-boards/generic/display.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Display routines for display messages in MIPS boards ascii display. - */ - -#include <linux/compiler.h> -#include <asm/io.h> -#include <asm/mips-boards/generic.h> - -void mips_display_message(const char *str) -{ - static volatile unsigned int *display = NULL; - int i; - - if (unlikely(display == NULL)) - display = (volatile unsigned int *)ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int)); - - for (i = 0; i <= 14; i=i+2) { - if (*str) - display[i] = *str++; - else - display[i] = ' '; - } -} diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mips-boards/generic/gdb_hook.c deleted file mode 100644 index 91a2ccbe373..00000000000 --- a/arch/mips/mips-boards/generic/gdb_hook.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include <linux/types.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/serial_reg.h> - -#include <asm/serial.h> -#include <asm/io.h> - -static struct serial_state rs_table[RS_TABLE_SIZE] = { - SERIAL_PORT_DFNS /* Defined in serial.h */ -}; - -static struct async_struct kdb_port_info = {0}; - -int (*generic_putDebugChar)(char); -char (*generic_getDebugChar)(void); - -static __inline__ unsigned int serial_in(struct async_struct *info, int offset) -{ - return inb(info->port + offset); -} - -static __inline__ void serial_out(struct async_struct *info, int offset, - int value) -{ - outb(value, info->port+offset); -} - -int rs_kgdb_hook(int tty_no, int speed) { - int t; - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = ser->port; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - serial_in(&kdb_port_info, UART_LSR); - serial_in(&kdb_port_info, UART_RX); - serial_in(&kdb_port_info, UART_IIR); - serial_in(&kdb_port_info, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ - if (kdb_port_info.flags & ASYNC_FOURPORT) { - kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; - t = UART_MCR_DTR | UART_MCR_OUT1; - } else { - kdb_port_info.MCR - = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - t = UART_MCR_DTR | UART_MCR_RTS; - } - - kdb_port_info.MCR = t; /* no interrupts, please */ - serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); - - /* - * and set the speed of the serial port - */ - if (speed == 0) - speed = 9600; - - t = kdb_port_info.state->baud_base / speed; - /* set DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); - serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ - serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ - /* reset DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); - - return speed; -} - -int putDebugChar(char c) -{ - return generic_putDebugChar(c); -} - -char getDebugChar(void) -{ - return generic_getDebugChar(); -} - -int rs_putDebugChar(char c) -{ - - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(&kdb_port_info, UART_TX, c); - - return 1; -} - -char rs_getDebugChar(void) -{ - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) - ; - - return serial_in(&kdb_port_info, UART_RX); -} diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c deleted file mode 100644 index 31caf0603a3..00000000000 --- a/arch/mips/mips-boards/generic/init.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * PROM library initialisation code. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/kernel.h> - -#include <asm/io.h> -#include <asm/bootinfo.h> -#include <asm/mips-boards/prom.h> -#include <asm/mips-boards/generic.h> -#ifdef CONFIG_MIPS_GT64120 -#include <asm/gt64120.h> -#endif -#include <asm/mips-boards/msc01_pci.h> -#include <asm/mips-boards/bonito64.h> -#ifdef CONFIG_MIPS_MALTA -#include <asm/mips-boards/malta.h> -#endif - -#ifdef CONFIG_KGDB -extern int rs_kgdb_hook(int, int); -extern int rs_putDebugChar(char); -extern char rs_getDebugChar(void); -extern int saa9730_kgdb_hook(int); -extern int saa9730_putDebugChar(char); -extern char saa9730_getDebugChar(void); -#endif - -int prom_argc; -int *_prom_argv, *_prom_envp; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension, if running in 64-bit mode. - */ -#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) - -int init_debug = 0; - -unsigned int mips_revision_corid; - -/* Bonito64 system controller register base. */ -unsigned long _pcictrl_bonito; -unsigned long _pcictrl_bonito_pcicfg; - -/* GT64120 system controller register base */ -unsigned long _pcictrl_gt64120; - -/* MIPS System controller register base */ -unsigned long _pcictrl_msc; - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - * In 64-bit mode: we're using 64-bit pointers, but all pointers - * in the PROM structures are only 32-bit, so we need some - * workarounds, if we are running in 64-bit mode. - */ - int i, index=0; - - i = strlen(envname); - - while (prom_envp(index)) { - if(strncmp(envname, prom_envp(index), i) == 0) { - return(prom_envp(index+1)); - } - index += 2; - } - - return NULL; -} - -static inline unsigned char str2hexnum(unsigned char c) -{ - if (c >= '0' && c <= '9') - return c - '0'; - if (c >= 'a' && c <= 'f') - return c - 'a' + 10; - return 0; /* foo */ -} - -static inline void str2eaddr(unsigned char *ea, unsigned char *str) -{ - int i; - - for (i = 0; i < 6; i++) { - unsigned char num; - - if((*str == '.') || (*str == ':')) - str++; - num = str2hexnum(*str++) << 4; - num |= (str2hexnum(*str++)); - ea[i] = num; - } -} - -int get_ethernet_addr(char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv("ethaddr"); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - - if (init_debug > 1) { - int i; - printk("get_ethernet_addr: "); - for (i=0; i<5; i++) - printk("%02x:", (unsigned char)*(ethernet_addr+i)); - printk("%02x\n", *(ethernet_addr+i)); - } - - return 0; -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE -static void __init console_config(void) -{ - char console_string[40]; - int baud = 0; - char parity = '\0', bits = '\0', flow = '\0'; - char *s; - - if ((strstr(prom_getcmdline(), "console=ttyS")) == NULL) { - s = prom_getenv("modetty0"); - if (s) { - while (*s >= '0' && *s <= '9') - baud = baud*10 + *s++ - '0'; - if (*s == ',') s++; - if (*s) parity = *s++; - if (*s == ',') s++; - if (*s) bits = *s++; - if (*s == ',') s++; - if (*s == 'h') flow = 'r'; - } - if (baud == 0) - baud = 38400; - if (parity != 'n' && parity != 'o' && parity != 'e') - parity = 'n'; - if (bits != '7' && bits != '8') - bits = '8'; - if (flow == '\0') - flow = 'r'; - sprintf (console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow); - strcat (prom_getcmdline(), console_string); - prom_printf("Config serial console:%s\n", console_string); - } -} -#endif - -#ifdef CONFIG_KGDB -void __init kgdb_config (void) -{ - extern int (*generic_putDebugChar)(char); - extern char (*generic_getDebugChar)(void); - char *argptr; - int line, speed; - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - argptr += strlen("kgdb=ttyS"); - if (*argptr != '0' && *argptr != '1') - printk("KGDB: Unknown serial line /dev/ttyS%c, " - "falling back to /dev/ttyS1\n", *argptr); - line = *argptr == '0' ? 0 : 1; - printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); - - speed = 0; - if (*++argptr == ',') - { - int c; - while ((c = *++argptr) && ('0' <= c && c <= '9')) - speed = speed * 10 + c - '0'; - } -#ifdef CONFIG_MIPS_ATLAS - if (line == 1) { - speed = saa9730_kgdb_hook(speed); - generic_putDebugChar = saa9730_putDebugChar; - generic_getDebugChar = saa9730_getDebugChar; - } - else -#endif - { - speed = rs_kgdb_hook(line, speed); - generic_putDebugChar = rs_putDebugChar; - generic_getDebugChar = rs_getDebugChar; - } - - prom_printf("KGDB: Using serial line /dev/ttyS%d at %d for session, " - "please connect your debugger\n", line ? 1 : 0, speed); - - { - char *s; - for (s = "Please connect GDB to this port\r\n"; *s; ) - generic_putDebugChar (*s++); - } - - kgdb_enabled = 1; - /* Breakpoint is invoked after interrupts are initialised */ - } -} -#endif - -void __init prom_init(void) -{ - prom_argc = fw_arg0; - _prom_argv = (int *) fw_arg1; - _prom_envp = (int *) fw_arg2; - - mips_display_message("LINUX"); - -#ifdef CONFIG_MIPS_SEAD - set_io_port_base(KSEG1); -#else - /* - * early setup of _pcictrl_bonito so that we can determine - * the system controller on a CORE_EMUL board - */ - _pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE); - - mips_revision_corid = MIPS_REVISION_CORID; - - if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) { - if (BONITO_PCIDID == 0x0001df53 || - BONITO_PCIDID == 0x0003df53) - mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON; - else - mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC; - } - switch(mips_revision_corid) { - case MIPS_REVISION_CORID_QED_RM5261: - case MIPS_REVISION_CORID_CORE_LV: - case MIPS_REVISION_CORID_CORE_FPGA: - case MIPS_REVISION_CORID_CORE_FPGAR2: - /* - * Setup the North bridge to do Master byte-lane swapping - * when running in bigendian. - */ - _pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT | - GT_PCI0_CMD_SBYTESWAP_BIT); -#else - GT_WRITE(GT_PCI0_CMD_OFS, 0); -#endif - -#ifdef CONFIG_MIPS_MALTA - set_io_port_base(MALTA_GT_PORT_BASE); -#else - set_io_port_base((unsigned long)ioremap(0, 0x20000000)); -#endif - break; - - case MIPS_REVISION_CORID_CORE_EMUL_BON: - case MIPS_REVISION_CORID_BONITO64: - case MIPS_REVISION_CORID_CORE_20K: - _pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE); - - /* - * Disable Bonito IOBC. - */ - BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & - ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - - /* - * Setup the North bridge to do Master byte-lane swapping - * when running in bigendian. - */ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - BONITO_BONGENCFG = BONITO_BONGENCFG & - ~(BONITO_BONGENCFG_MSTRBYTESWAP | - BONITO_BONGENCFG_BYTESWAP); -#else - BONITO_BONGENCFG = BONITO_BONGENCFG | - BONITO_BONGENCFG_MSTRBYTESWAP | - BONITO_BONGENCFG_BYTESWAP; -#endif - -#ifdef CONFIG_MIPS_MALTA - set_io_port_base(MALTA_BONITO_PORT_BASE); -#else - set_io_port_base((unsigned long)ioremap(0, 0x20000000)); -#endif - break; - - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: - _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP); -#else - MSC_WRITE(MSC01_PCI_SWAP, - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF | - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF | - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF); -#endif - -#ifdef CONFIG_MIPS_MALTA - set_io_port_base(MALTA_MSC_PORT_BASE); -#else - set_io_port_base((unsigned long)ioremap(0, 0x20000000)); -#endif - break; - - default: - /* Unknown Core card */ - mips_display_message("CC Error"); - while(1); /* We die here... */ - } -#endif - prom_printf("\nLINUX started...\n"); - prom_init_cmdline(); - prom_meminit(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - console_config(); -#endif -} diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c deleted file mode 100644 index 5ae2b43e4c2..00000000000 --- a/arch/mips/mips-boards/generic/memory.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * PROM library functions for acquiring/using memory descriptors given to - * us from the YAMON. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/bootmem.h> - -#include <asm/bootinfo.h> -#include <asm/page.h> - -#include <asm/mips-boards/prom.h> - -/*#define DEBUG*/ - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; -struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; - -#ifdef DEBUG -static char *mtypes[3] = { - "Dont use memory", - "YAMON PROM memory", - "Free memmory", -}; -#endif - -/* References to section boundaries */ -extern char _end; - -#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) - - -struct prom_pmemblock * __init prom_getmdesc(void) -{ - char *memsize_str; - unsigned int memsize; - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - prom_printf("memsize not set in boot prom, set to default (32Mb)\n"); - memsize = 0x02000000; - } else { -#ifdef DEBUG - prom_printf("prom_memsize = %s\n", memsize_str); -#endif - memsize = simple_strtol(memsize_str, NULL, 0); - } - - memset(mdesc, 0, sizeof(mdesc)); - - mdesc[0].type = yamon_dontuse; - mdesc[0].base = 0x00000000; - mdesc[0].size = 0x00001000; - - mdesc[1].type = yamon_prom; - mdesc[1].base = 0x00001000; - mdesc[1].size = 0x000ef000; - -#ifdef CONFIG_MIPS_MALTA - /* - * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the - * south bridge and PCI access always forwarded to the ISA Bus and - * BIOSCS# is always generated. - * This mean that this area can't be used as DMA memory for PCI - * devices. - */ - mdesc[2].type = yamon_dontuse; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; -#else - mdesc[2].type = yamon_prom; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; -#endif - - mdesc[3].type = yamon_dontuse; - mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[3].base; - - mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); - mdesc[4].size = memsize - mdesc[4].base; - - return &mdesc[0]; -} - -static int __init prom_memtype_classify (unsigned int type) -{ - switch (type) { - case yamon_free: - return BOOT_MEM_RAM; - case yamon_prom: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - -void __init prom_meminit(void) -{ - struct prom_pmemblock *p; - -#ifdef DEBUG - prom_printf("YAMON MEMORY DESCRIPTOR dump:\n"); - p = prom_getmdesc(); - while (p->size) { - int i = 0; - prom_printf("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n", - i, p, p->base, p->size, mtypes[p->type]); - p++; - i++; - } -#endif - p = prom_getmdesc(); - - while (p->size) { - long type; - unsigned long base, size; - - type = prom_memtype_classify (p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - } -} - -unsigned long __init prom_free_prom_memory(void) -{ - unsigned long freed = 0; - unsigned long addr; - int i; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) - continue; - - addr = boot_mem_map.map[i].addr; - while (addr < boot_mem_map.map[i].addr - + boot_mem_map.map[i].size) { - ClearPageReserved(virt_to_page(__va(addr))); - set_page_count(virt_to_page(__va(addr)), 1); - free_page((unsigned long)__va(addr)); - addr += PAGE_SIZE; - freed += PAGE_SIZE; - } - } - printk("Freeing prom memory: %ldkb freed\n", freed >> 10); - - return freed; -} diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S deleted file mode 100644 index 131f49bccb2..00000000000 --- a/arch/mips/mips-boards/generic/mipsIRQ.S +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Interrupt exception dispatch code. - * - */ -#include <linux/config.h> - -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop and moving across - * all the pending IRQ bits in the cause register is _NOT_ the answer, the - * common case is one pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register IRQ mask, that - * would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in - * between like BSD spl() brain-damage. - * - * Furthermore, the IRQs on the MIPS board look basically (barring software - * IRQs which we don't use at all and all external interrupt sources are - * combined together on hardware interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Combined hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * Note: On the SEAD board thing are a little bit different. - * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired - * wired to UART1. - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(mipsIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - - mfc0 s0, CP0_CAUSE # get irq bits - mfc0 s1, CP0_STATUS # get irq mask - and s0, s1 - - /* First we check for r4k counter/timer IRQ. */ - andi a0, s0, CAUSEF_IP7 - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt - - /* Wheee, a timer interrupt. */ - move a0, sp - jal mips_timer_interrupt - nop - - j ret_from_irq - nop - -1: -#if defined(CONFIG_MIPS_SEAD) - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt -#else - beq a0, zero, 1f # delay slot, check hw3 interrupt - andi a0, s0, CAUSEF_IP5 -#endif - - /* Wheee, combined hardware level zero interrupt. */ -#if defined(CONFIG_MIPS_ATLAS) - jal atlas_hw0_irqdispatch -#elif defined(CONFIG_MIPS_MALTA) - jal malta_hw0_irqdispatch -#elif defined(CONFIG_MIPS_SEAD) - jal sead_hw0_irqdispatch -#else -#error "MIPS board not supported\n" -#endif - move a0, sp # delay slot - - j ret_from_irq - nop # delay slot - -1: -#if defined(CONFIG_MIPS_SEAD) - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt - jal sead_hw1_irqdispatch - move a0, sp # delay slot - j ret_from_irq - nop # delay slot -1: -#endif -#if defined(CONFIG_MIPS_MALTA) - beq a0, zero, 1f # check hw3 (coreHI) interrupt - nop - jal corehi_irqdispatch - move a0, sp - j ret_from_irq - nop -1: -#endif - /* - * Here by mistake? This is possible, what can happen is that by the - * time we take the exception the IRQ pin goes low, so just leave if - * this is the case. - */ - move a1,s0 - PRINT("Got interrupt: c0_cause = %08x\n") - mfc0 a1, CP0_EPC - PRINT("c0_epc = %08x\n") - - j ret_from_irq - nop - END(mipsIRQ) diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c deleted file mode 100644 index 92c34bda02a..00000000000 --- a/arch/mips/mips-boards/generic/pci.c +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * MIPS boards specific PCI support. - */ -#include <linux/config.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/mips-boards/generic.h> -#include <asm/gt64120.h> -#include <asm/mips-boards/bonito64.h> -#include <asm/mips-boards/msc01_pci.h> -#ifdef CONFIG_MIPS_MALTA -#include <asm/mips-boards/malta.h> -#endif - -static struct resource bonito64_mem_resource = { - .name = "Bonito PCI MEM", - .start = 0x10000000UL, - .end = 0x1bffffffUL, - .flags = IORESOURCE_MEM, -}; - -static struct resource bonito64_io_resource = { - .name = "Bonito IO MEM", - .start = 0x00002000UL, /* avoid conflicts with YAMON allocated I/O addresses */ - .end = 0x000fffffUL, - .flags = IORESOURCE_IO, -}; - -static struct resource gt64120_mem_resource = { - .name = "GT64120 PCI MEM", - .start = 0x10000000UL, - .end = 0x1bdfffffUL, - .flags = IORESOURCE_MEM, -}; - -static struct resource gt64120_io_resource = { - .name = "GT64120 IO MEM", -#ifdef CONFIG_MIPS_ATLAS - .start = 0x18000000UL, - .end = 0x181fffffUL, -#endif -#ifdef CONFIG_MIPS_MALTA - .start = 0x00002000UL, - .end = 0x001fffffUL, -#endif - .flags = IORESOURCE_IO, -}; - -static struct resource msc_mem_resource = { - .name = "MSC PCI MEM", - .start = 0x10000000UL, - .end = 0x1fffffffUL, - .flags = IORESOURCE_MEM, -}; - -static struct resource msc_io_resource = { - .name = "MSC IO MEM", - .start = 0x00002000UL, - .end = 0x007fffffUL, - .flags = IORESOURCE_IO, -}; - -extern struct pci_ops bonito64_pci_ops; -extern struct pci_ops gt64120_pci_ops; -extern struct pci_ops msc_pci_ops; - -static struct pci_controller bonito64_controller = { - .pci_ops = &bonito64_pci_ops, - .io_resource = &bonito64_io_resource, - .mem_resource = &bonito64_mem_resource, - .mem_offset = 0x10000000UL, - .io_offset = 0x00000000UL, -}; - -static struct pci_controller gt64120_controller = { - .pci_ops = >64120_pci_ops, - .io_resource = >64120_io_resource, - .mem_resource = >64120_mem_resource, - .mem_offset = 0x00000000UL, - .io_offset = 0x00000000UL, -}; - -static struct pci_controller msc_controller = { - .pci_ops = &msc_pci_ops, - .io_resource = &msc_io_resource, - .mem_resource = &msc_mem_resource, - .mem_offset = 0x10000000UL, - .io_offset = 0x00000000UL, -}; - -static int __init pcibios_init(void) -{ - struct pci_controller *controller; - - switch (mips_revision_corid) { - case MIPS_REVISION_CORID_QED_RM5261: - case MIPS_REVISION_CORID_CORE_LV: - case MIPS_REVISION_CORID_CORE_FPGA: - case MIPS_REVISION_CORID_CORE_FPGAR2: - /* - * Due to a bug in the Galileo system controller, we need - * to setup the PCI BAR for the Galileo internal registers. - * This should be done in the bios/bootprom and will be - * fixed in a later revision of YAMON (the MIPS boards - * boot prom). - */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | /* Local bus */ - (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */ - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/ - ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/ - GT_PCI0_CFGADDR_CONFIGEN_BIT ); - - /* Perform the write */ - GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE)); - - controller = >64120_controller; - break; - - case MIPS_REVISION_CORID_BONITO64: - case MIPS_REVISION_CORID_CORE_20K: - case MIPS_REVISION_CORID_CORE_EMUL_BON: - controller = &bonito64_controller; - break; - - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: - controller = &msc_controller; - break; - default: - return 1; - } - - ioport_resource.end = controller->io_resource->end; - - register_pci_controller (controller); - - return 0; -} - -early_initcall(pcibios_init); diff --git a/arch/mips/mips-boards/generic/printf.c b/arch/mips/mips-boards/generic/printf.c deleted file mode 100644 index 2c1ab1f19fd..00000000000 --- a/arch/mips/mips-boards/generic/printf.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Putting things on the screen/serial line using YAMONs facilities. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/serial_reg.h> -#include <linux/spinlock.h> -#include <asm/io.h> - -#ifdef CONFIG_MIPS_ATLAS -#include <asm/mips-boards/atlas.h> - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define PORT(offset) (ATLAS_UART_REGS_BASE + ((offset)<<3)) -#else -#define PORT(offset) (ATLAS_UART_REGS_BASE + 3 + ((offset)<<3)) -#endif - -#elif defined(CONFIG_MIPS_SEAD) - -#include <asm/mips-boards/sead.h> - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define PORT(offset) (SEAD_UART0_REGS_BASE + ((offset)<<3)) -#else -#define PORT(offset) (SEAD_UART0_REGS_BASE + 3 + ((offset)<<3)) -#endif - -#else - -#define PORT(offset) (0x3f8 + (offset)) - -#endif - -static inline unsigned int serial_in(int offset) -{ - return inb(PORT(offset)); -} - -static inline void serial_out(int offset, int value) -{ - outb(value, PORT(offset)); -} - -int prom_putchar(char c) -{ - while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(UART_TX, c); - - return 1; -} - -char prom_getchar(void) -{ - while (!(serial_in(UART_LSR) & UART_LSR_DR)) - ; - - return serial_in(UART_RX); -} - diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c deleted file mode 100644 index 9fdec743bd9..00000000000 --- a/arch/mips/mips-boards/generic/reset.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Reset the MIPS boards. - * - */ -#include <linux/config.h> - -#include <asm/io.h> -#include <asm/reboot.h> -#include <asm/mips-boards/generic.h> -#if defined(CONFIG_MIPS_ATLAS) -#include <asm/mips-boards/atlas.h> -#endif - -static void mips_machine_restart(char *command); -static void mips_machine_halt(void); -#if defined(CONFIG_MIPS_ATLAS) -static void atlas_machine_power_off(void); -#endif - -static void mips_machine_restart(char *command) -{ - volatile unsigned int *softres_reg = (unsigned int *)ioremap (SOFTRES_REG, sizeof(unsigned int)); - - *softres_reg = GORESET; -} - -static void mips_machine_halt(void) -{ - volatile unsigned int *softres_reg = (unsigned int *)ioremap (SOFTRES_REG, sizeof(unsigned int)); - - *softres_reg = GORESET; -} - -#if defined(CONFIG_MIPS_ATLAS) -static void atlas_machine_power_off(void) -{ - volatile unsigned int *psustby_reg = (unsigned int *)ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int)); - - *psustby_reg = ATLAS_GOSTBY; -} -#endif - -void mips_reboot_setup(void) -{ - _machine_restart = mips_machine_restart; - _machine_halt = mips_machine_halt; -#if defined(CONFIG_MIPS_ATLAS) - _machine_power_off = atlas_machine_power_off; -#endif -#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD) - _machine_power_off = mips_machine_halt; -#endif -} diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c deleted file mode 100644 index fe7fc17305a..00000000000 --- a/arch/mips/mips-boards/generic/time.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Setting up the clock on the MIPS boards. - */ - -#include <linux/types.h> -#include <linux/config.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/mc146818rtc.h> - -#include <asm/mipsregs.h> -#include <asm/ptrace.h> -#include <asm/div64.h> -#include <asm/cpu.h> -#include <asm/time.h> -#include <asm/mc146818-time.h> - -#include <asm/mips-boards/generic.h> -#include <asm/mips-boards/prom.h> - -unsigned long cpu_khz; - -#if defined(CONFIG_MIPS_SEAD) -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ5) -#else -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) -#endif - -#if defined(CONFIG_MIPS_ATLAS) -static char display_string[] = " LINUX ON ATLAS "; -#endif -#if defined(CONFIG_MIPS_MALTA) -static char display_string[] = " LINUX ON MALTA "; -#endif -#if defined(CONFIG_MIPS_SEAD) -static char display_string[] = " LINUX ON SEAD "; -#endif -static unsigned int display_count = 0; -#define MAX_DISPLAY_COUNT (sizeof(display_string) - 8) - -#define MIPS_CPU_TIMER_IRQ (NR_IRQS-1) - -static unsigned int timer_tick_count=0; - -void mips_timer_interrupt(struct pt_regs *regs) -{ - if ((timer_tick_count++ % HZ) == 0) { - mips_display_message(&display_string[display_count++]); - if (display_count == MAX_DISPLAY_COUNT) - display_count = 0; - - } - - ll_timer_interrupt(MIPS_CPU_TIMER_IRQ, regs); -} - -/* - * Estimate CPU frequency. Sets mips_counter_frequency as a side-effect - */ -static unsigned int __init estimate_cpu_frequency(void) -{ - unsigned int prid = read_c0_prid() & 0xffff00; - unsigned int count; - -#ifdef CONFIG_MIPS_SEAD - /* - * The SEAD board doesn't have a real time clock, so we can't - * really calculate the timer frequency - * For now we hardwire the SEAD board frequency to 12MHz. - */ - - if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) || - (prid == (PRID_COMP_MIPS | PRID_IMP_25KF))) - count = 12000000; - else - count = 6000000; -#endif -#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA) - unsigned int flags; - - local_irq_save(flags); - - /* Start counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - /* Start r4k counter. */ - write_c0_count(0); - - /* Read counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - count = read_c0_count(); - - /* restore interrupts */ - local_irq_restore(flags); -#endif - - mips_hpt_frequency = count; - if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && - (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) - count *= 2; - - count += 5000; /* round */ - count -= count%10000; - - return count; -} - -unsigned long __init mips_rtc_get_time(void) -{ - return mc146818_get_cmos_time(); -} - -void __init mips_time_init(void) -{ - unsigned int est_freq, flags; - - local_irq_save(flags); - -#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA) - /* Set Data mode - binary. */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); -#endif - - est_freq = estimate_cpu_frequency (); - - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); - - cpu_khz = est_freq / 1000; - - local_irq_restore(flags); -} - -void __init mips_timer_setup(struct irqaction *irq) -{ - /* we are using the cpu counter for timer interrupts */ - irq->handler = no_action; /* we use our own handler */ - setup_irq(MIPS_CPU_TIMER_IRQ, irq); - - /* to generate the first timer interrupt */ - write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ); - set_c0_status(ALLINTS); -} diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile deleted file mode 100644 index fd4c143c0e2..00000000000 --- a/arch/mips/mips-boards/malta/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# Makefile for the MIPS Malta specific kernel interface routines -# under Linux. -# - -obj-y := malta_int.o malta_setup.o diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c deleted file mode 100644 index dd2db35966b..00000000000 --- a/arch/mips/mips-boards/malta/malta_int.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. - * Copyright (C) 2001 Ralf Baechle - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the MIPS - * Malta board. - * The interrupt controller is located in the South Bridge a PIIX4 device - * with two internal 82C95 interrupt controllers. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/random.h> - -#include <asm/i8259.h> -#include <asm/io.h> -#include <asm/mips-boards/malta.h> -#include <asm/mips-boards/maltaint.h> -#include <asm/mips-boards/piix4.h> -#include <asm/gt64120.h> -#include <asm/mips-boards/generic.h> -#include <asm/mips-boards/msc01_pci.h> - -extern asmlinkage void mipsIRQ(void); - -static DEFINE_SPINLOCK(mips_irq_lock); - -static inline int mips_pcibios_iack(void) -{ - int irq; - u32 dummy; - - /* - * Determine highest priority pending interrupt by performing - * a PCI Interrupt Acknowledge cycle. - */ - switch(mips_revision_corid) { - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: - MSC_READ(MSC01_PCI_IACK, irq); - irq &= 0xff; - break; - case MIPS_REVISION_CORID_QED_RM5261: - case MIPS_REVISION_CORID_CORE_LV: - case MIPS_REVISION_CORID_CORE_FPGA: - case MIPS_REVISION_CORID_CORE_FPGAR2: - irq = GT_READ(GT_PCI0_IACK_OFS); - irq &= 0xff; - break; - case MIPS_REVISION_CORID_BONITO64: - case MIPS_REVISION_CORID_CORE_20K: - case MIPS_REVISION_CORID_CORE_EMUL_BON: - /* The following will generate a PCI IACK cycle on the - * Bonito controller. It's a little bit kludgy, but it - * was the easiest way to implement it in hardware at - * the given time. - */ - BONITO_PCIMAP_CFG = 0x20000; - - /* Flush Bonito register block */ - dummy = BONITO_PCIMAP_CFG; - iob(); /* sync */ - - irq = *(volatile u32 *)(_pcictrl_bonito_pcicfg); - iob(); /* sync */ - irq &= 0xff; - BONITO_PCIMAP_CFG = 0; - break; - default: - printk("Unknown Core card, don't know the system controller.\n"); - return -1; - } - return irq; -} - -static inline int get_int(int *irq) -{ - unsigned long flags; - - spin_lock_irqsave(&mips_irq_lock, flags); - - *irq = mips_pcibios_iack(); - - /* - * IRQ7 is used to detect spurious interrupts. - * The interrupt acknowledge cycle returns IRQ7, if no - * interrupts is requested. - * We can differentiate between this situation and a - * "Normal" IRQ7 by reading the ISR. - */ - if (*irq == 7) - { - outb(PIIX4_OCW3_SEL | PIIX4_OCW3_ISR, - PIIX4_ICTLR1_OCW3); - if (!(inb(PIIX4_ICTLR1_OCW3) & (1 << 7))) { - spin_unlock_irqrestore(&mips_irq_lock, flags); - printk("We got a spurious interrupt from PIIX4.\n"); - atomic_inc(&irq_err_count); - return -1; /* Spurious interrupt. */ - } - } - - spin_unlock_irqrestore(&mips_irq_lock, flags); - - return 0; -} - -void malta_hw0_irqdispatch(struct pt_regs *regs) -{ - int irq; - - if (get_int(&irq)) - return; /* interrupt has already been cleared */ - - do_IRQ(irq, regs); -} - -void corehi_irqdispatch(struct pt_regs *regs) -{ - unsigned int data,datahi; - - /* Mask out corehi interrupt. */ - clear_c0_status(IE_IRQ3); - - printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n"); - printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\nbadVaddr : %08lx\n" -, regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr); - switch(mips_revision_corid) { - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: - break; - case MIPS_REVISION_CORID_QED_RM5261: - case MIPS_REVISION_CORID_CORE_LV: - case MIPS_REVISION_CORID_CORE_FPGA: - case MIPS_REVISION_CORID_CORE_FPGAR2: - data = GT_READ(GT_INTRCAUSE_OFS); - printk("GT_INTRCAUSE = %08x\n", data); - data = GT_READ(GT_CPUERR_ADDRLO_OFS); - datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); - printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, data); - break; - case MIPS_REVISION_CORID_BONITO64: - case MIPS_REVISION_CORID_CORE_20K: - case MIPS_REVISION_CORID_CORE_EMUL_BON: - data = BONITO_INTISR; - printk("BONITO_INTISR = %08x\n", data); - data = BONITO_INTEN; - printk("BONITO_INTEN = %08x\n", data); - data = BONITO_INTPOL; - printk("BONITO_INTPOL = %08x\n", data); - data = BONITO_INTEDGE; - printk("BONITO_INTEDGE = %08x\n", data); - data = BONITO_INTSTEER; - printk("BONITO_INTSTEER = %08x\n", data); - data = BONITO_PCICMD; - printk("BONITO_PCICMD = %08x\n", data); - break; - } - - /* We die here*/ - die("CoreHi interrupt", regs); -} - -void __init arch_init_irq(void) -{ - set_except_vector(0, mipsIRQ); - init_i8259_irqs(); -} diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c deleted file mode 100644 index 3377e66de9e..00000000000 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/tty.h> - -#ifdef CONFIG_MTD -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#endif - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mips-boards/generic.h> -#include <asm/mips-boards/prom.h> -#include <asm/mips-boards/malta.h> -#include <asm/mips-boards/maltaint.h> -#include <asm/dma.h> -#include <asm/time.h> -#include <asm/traps.h> -#ifdef CONFIG_VT -#include <linux/console.h> -#endif - -extern void mips_reboot_setup(void); -extern void mips_time_init(void); -extern void mips_timer_setup(struct irqaction *irq); -extern unsigned long mips_rtc_get_time(void); - -#ifdef CONFIG_KGDB -extern void kgdb_config(void); -#endif - -struct resource standard_io_resources[] = { - { "dma1", 0x00, 0x1f, IORESOURCE_BUSY }, - { "timer", 0x40, 0x5f, IORESOURCE_BUSY }, - { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY }, - { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY }, - { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY }, -}; - -#ifdef CONFIG_MTD -static struct mtd_partition malta_mtd_partitions[] = { - { - .name = "YAMON", - .offset = 0x0, - .size = 0x100000, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "User FS", - .offset = 0x100000, - .size = 0x2e0000 - }, - { - .name = "Board Config", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE - } -}; - -#define number_partitions (sizeof(malta_mtd_partitions)/sizeof(struct mtd_partition)) -#endif - -const char *get_system_type(void) -{ - return "MIPS Malta"; -} - -#ifdef CONFIG_BLK_DEV_FD -void __init fd_activate(void) -{ - /* - * Activate Floppy Controller in the SMSC FDC37M817 Super I/O - * Controller. - * Done by YAMON 2.00 onwards - */ - /* Entering config state. */ - SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG); - - /* Activate floppy controller. */ - SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG); - SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG); - SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG); - SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG); - - /* Exit config state. */ - SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG); -} -#endif - -static int __init malta_setup(void) -{ - unsigned int i; - - /* Request I/O space for devices used on the Malta board. */ - for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) - request_resource(&ioport_resource, standard_io_resources+i); - - /* - * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge. - */ - enable_dma(4); - -#ifdef CONFIG_KGDB - kgdb_config (); -#endif - - if ((mips_revision_corid == MIPS_REVISION_CORID_BONITO64) || - (mips_revision_corid == MIPS_REVISION_CORID_CORE_20K) || - (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL_BON)) { - char *argptr; - - argptr = prom_getcmdline(); - if (strstr(argptr, "debug")) { - BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE; - printk ("Enabled Bonito debug mode\n"); - } - else - BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE; - -#ifdef CONFIG_DMA_COHERENT - if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) { - BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN; - printk("Enabled Bonito CPU coherency\n"); - - argptr = prom_getcmdline(); - if (strstr(argptr, "iobcuncached")) { - BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & - ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - printk("Disabled Bonito IOBC coherency\n"); - } - else { - BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG |= - (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - printk("Disabled Bonito IOBC coherency\n"); - } - } - else - panic("Hardware DMA cache coherency not supported"); - -#endif - } -#ifdef CONFIG_DMA_COHERENT - else { - panic("Hardware DMA cache coherency not supported"); - } -#endif - -#ifdef CONFIG_BLK_DEV_IDE - /* Check PCI clock */ - { - int jmpr = (*((volatile unsigned int *)ioremap(MALTA_JMPRS_REG, sizeof(unsigned int))) >> 2) & 0x07; - static const int pciclocks[] __initdata = { - 33, 20, 25, 30, 12, 16, 37, 10 - }; - int pciclock = pciclocks[jmpr]; - char *argptr = prom_getcmdline(); - - if (pciclock != 33 && !strstr (argptr, "idebus=")) { - printk("WARNING: PCI clock is %dMHz, setting idebus\n", pciclock); - argptr += strlen(argptr); - sprintf (argptr, " idebus=%d", pciclock); - if (pciclock < 20 || pciclock > 66) - printk ("WARNING: IDE timing calculations will be incorrect\n"); - } - } -#endif -#ifdef CONFIG_BLK_DEV_FD - fd_activate (); -#endif -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - screen_info = (struct screen_info) { - 0, 25, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig-video-page */ - 0, /* orig-video-mode */ - 80, /* orig-video-cols */ - 0,0,0, /* ega_ax, ega_bx, ega_cx */ - 25, /* orig-video-lines */ - VIDEO_TYPE_VGAC, /* orig-video-isVGA */ - 16 /* orig-video-points */ - }; -#endif -#endif - -#ifdef CONFIG_MTD - /* - * Support for MTD on Malta. Use the generic physmap driver - */ - physmap_configure(0x1e000000, 0x400000, 4, NULL); - physmap_set_partitions(malta_mtd_partitions, number_partitions); -#endif - - mips_reboot_setup(); - - board_time_init = mips_time_init; - board_timer_setup = mips_timer_setup; - rtc_get_time = mips_rtc_get_time; - - return 0; -} - -early_initcall(malta_setup); diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile deleted file mode 100644 index 224bb848f16..00000000000 --- a/arch/mips/mips-boards/sead/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. -# -# ######################################################################## -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# ####################################################################### -# -# Makefile for the MIPS SEAD specific kernel interface routines -# under Linux. -# - -obj-y := sead_int.o sead_setup.o diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c deleted file mode 100644 index e5109657ed5..00000000000 --- a/arch/mips/mips-boards/sead/sead_int.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the MIPS - * Sead board. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <asm/mips-boards/seadint.h> - -extern asmlinkage void mipsIRQ(void); - -asmlinkage void sead_hw0_irqdispatch(struct pt_regs *regs) -{ - do_IRQ(SEADINT_UART0, regs); -} - -asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs) -{ - do_IRQ(SEADINT_UART1, regs); -} - -void __init arch_init_irq(void) -{ - /* - * Mask out all interrupt - */ - clear_c0_status(0x0000ff00); - - /* Now safe to set the exception vector. */ - set_except_vector(0, mipsIRQ); - - mips_cpu_irq_init(0); -} diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c deleted file mode 100644 index 29892b88a4f..00000000000 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * SEAD specific setup. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/tty.h> -#include <linux/serial.h> -#include <linux/serial_core.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mips-boards/generic.h> -#include <asm/mips-boards/prom.h> -#include <asm/mips-boards/sead.h> -#include <asm/mips-boards/seadint.h> -#include <asm/time.h> - -extern void mips_reboot_setup(void); -extern void mips_time_init(void); -extern void mips_timer_setup(struct irqaction *irq); - -static void __init serial_init(void); - -const char *get_system_type(void) -{ - return "MIPS SEAD"; -} - -static void __init sead_setup(void) -{ - ioport_resource.end = 0x7fffffff; - - serial_init (); - - board_time_init = mips_time_init; - board_timer_setup = mips_timer_setup; - - mips_reboot_setup(); -} - -early_initcall(sead_setup); - -static void __init serial_init(void) -{ -#ifdef CONFIG_SERIAL_8250 - struct uart_port s; - - memset(&s, 0, sizeof(s)); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - s.iobase = SEAD_UART0_REGS_BASE; -#else - s.iobase = SEAD_UART0_REGS_BASE+3; -#endif - s.irq = SEADINT_UART0; - s.uartclk = SEAD_BASE_BAUD * 16; - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - s.iotype = 0; - s.regshift = 3; - - if (early_serial_setup(&s) != 0) { - printk(KERN_ERR "Serial setup failed!\n"); - } -#endif -} |