diff options
Diffstat (limited to 'arch/mips/lantiq')
45 files changed, 2429 insertions, 1812 deletions
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index 3fccf210451..c0021912131 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -2,6 +2,7 @@ if LANTIQ config SOC_TYPE_XWAY bool + select PINCTRL_XWAY default n choice @@ -16,8 +17,27 @@ config SOC_XWAY bool "XWAY" select SOC_TYPE_XWAY select HW_HAS_PCI + +config SOC_FALCON + bool "FALCON" + select PINCTRL_FALCON + endchoice -source "arch/mips/lantiq/xway/Kconfig" +choice + prompt "Devicetree" + +config DT_EASY50712 + bool "Easy50712" + depends on SOC_XWAY +endchoice + +config PCI_LANTIQ + bool "PCI Support" + depends on SOC_XWAY && PCI + +config XRX200_PHY_FW + bool "XRX200 PHY firmware loader" + depends on SOC_XWAY endif diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile index e5dae0e24b0..d6bdc579419 100644 --- a/arch/mips/lantiq/Makefile +++ b/arch/mips/lantiq/Makefile @@ -4,8 +4,11 @@ # under the terms of the GNU General Public License version 2 as published # by the Free Software Foundation. -obj-y := irq.o setup.o clk.o prom.o devices.o +obj-y := irq.o clk.o prom.o + +obj-y += dts/ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_SOC_TYPE_XWAY) += xway/ +obj-$(CONFIG_SOC_FALCON) += falcon/ diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform index f3dff05722d..b3ec49838fd 100644 --- a/arch/mips/lantiq/Platform +++ b/arch/mips/lantiq/Platform @@ -6,3 +6,4 @@ platform-$(CONFIG_LANTIQ) += lantiq/ cflags-$(CONFIG_LANTIQ) += -I$(srctree)/arch/mips/include/asm/mach-lantiq load-$(CONFIG_LANTIQ) = 0xffffffff80002000 cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway +cflags-$(CONFIG_SOC_FALCON) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index 94560899d13..3fc2e6d70c7 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -7,11 +7,12 @@ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> */ #include <linux/io.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/clk.h> +#include <linux/clkdev.h> #include <linux/err.h> #include <linux/list.h> @@ -22,46 +23,42 @@ #include <lantiq_soc.h> #include "clk.h" +#include "prom.h" -struct clk { - const char *name; - unsigned long rate; - unsigned long (*get_rate) (void); -}; +/* lantiq socs have 3 static clocks */ +static struct clk cpu_clk_generic[4]; -static struct clk *cpu_clk; -static int cpu_clk_cnt; +void clkdev_add_static(unsigned long cpu, unsigned long fpi, + unsigned long io, unsigned long ppe) +{ + cpu_clk_generic[0].rate = cpu; + cpu_clk_generic[1].rate = fpi; + cpu_clk_generic[2].rate = io; + cpu_clk_generic[3].rate = ppe; +} -/* lantiq socs have 3 static clocks */ -static struct clk cpu_clk_generic[] = { - { - .name = "cpu", - .get_rate = ltq_get_cpu_hz, - }, { - .name = "fpi", - .get_rate = ltq_get_fpi_hz, - }, { - .name = "io", - .get_rate = ltq_get_io_region_clock, - }, -}; - -static struct resource ltq_cgu_resource = { - .name = "cgu", - .start = LTQ_CGU_BASE_ADDR, - .end = LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -/* remapped clock register range */ -void __iomem *ltq_cgu_membase; - -void clk_init(void) +struct clk *clk_get_cpu(void) +{ + return &cpu_clk_generic[0]; +} + +struct clk *clk_get_fpi(void) +{ + return &cpu_clk_generic[1]; +} +EXPORT_SYMBOL_GPL(clk_get_fpi); + +struct clk *clk_get_io(void) { - cpu_clk = cpu_clk_generic; - cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic); + return &cpu_clk_generic[2]; } +struct clk *clk_get_ppe(void) +{ + return &cpu_clk_generic[3]; +} +EXPORT_SYMBOL_GPL(clk_get_ppe); + static inline int clk_good(struct clk *clk) { return clk && !IS_ERR(clk); @@ -82,32 +79,83 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); -struct clk *clk_get(struct device *dev, const char *id) +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + if (unlikely(!clk_good(clk))) + return 0; + if (clk->rates && *clk->rates) { + unsigned long *r = clk->rates; + + while (*r && (*r != rate)) + r++; + if (!*r) { + pr_err("clk %s.%s: trying to set invalid rate %ld\n", + clk->cl.dev_id, clk->cl.con_id, rate); + return -1; + } + } + clk->rate = rate; + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_enable(struct clk *clk) { - int i; + if (unlikely(!clk_good(clk))) + return -1; + + if (clk->enable) + return clk->enable(clk); + + return -1; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return; + + if (clk->disable) + clk->disable(clk); +} +EXPORT_SYMBOL(clk_disable); + +int clk_activate(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return -1; + + if (clk->activate) + return clk->activate(clk); + + return -1; +} +EXPORT_SYMBOL(clk_activate); - for (i = 0; i < cpu_clk_cnt; i++) - if (!strcmp(id, cpu_clk[i].name)) - return &cpu_clk[i]; - BUG(); - return ERR_PTR(-ENOENT); +void clk_deactivate(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return; + + if (clk->deactivate) + clk->deactivate(clk); } -EXPORT_SYMBOL(clk_get); +EXPORT_SYMBOL(clk_deactivate); -void clk_put(struct clk *clk) +struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec) { - /* not used */ + return NULL; } -EXPORT_SYMBOL(clk_put); -static inline u32 ltq_get_counter_resolution(void) +static inline u32 get_counter_resolution(void) { u32 res; __asm__ __volatile__( - ".set push\n" - ".set mips32r2\n" - "rdhwr %0, $3\n" + ".set push\n" + ".set mips32r2\n" + "rdhwr %0, $3\n" ".set pop\n" : "=&r" (res) : /* no input */ @@ -120,21 +168,11 @@ void __init plat_time_init(void) { struct clk *clk; - if (insert_resource(&iomem_resource, <q_cgu_resource) < 0) - panic("Failed to insert cgu memory\n"); + ltq_soc_init(); - if (request_mem_region(ltq_cgu_resource.start, - resource_size(<q_cgu_resource), "cgu") < 0) - panic("Failed to request cgu memory\n"); - - ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start, - resource_size(<q_cgu_resource)); - if (!ltq_cgu_membase) { - pr_err("Failed to remap cgu memory\n"); - unreachable(); - } - clk = clk_get(0, "cpu"); - mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution(); + clk = clk_get_cpu(); + mips_hpt_frequency = clk_get_rate(clk) / get_counter_resolution(); write_c0_compare(read_c0_count()); + pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000); clk_put(clk); } diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h index 3328925f2c3..77e4bdb1fe8 100644 --- a/arch/mips/lantiq/clk.h +++ b/arch/mips/lantiq/clk.h @@ -9,10 +9,75 @@ #ifndef _LTQ_CLK_H__ #define _LTQ_CLK_H__ -extern void clk_init(void); +#include <linux/clkdev.h> -extern unsigned long ltq_get_cpu_hz(void); -extern unsigned long ltq_get_fpi_hz(void); -extern unsigned long ltq_get_io_region_clock(void); +/* clock speeds */ +#define CLOCK_33M 33333333 +#define CLOCK_60M 60000000 +#define CLOCK_62_5M 62500000 +#define CLOCK_83M 83333333 +#define CLOCK_83_5M 83500000 +#define CLOCK_98_304M 98304000 +#define CLOCK_100M 100000000 +#define CLOCK_111M 111111111 +#define CLOCK_125M 125000000 +#define CLOCK_133M 133333333 +#define CLOCK_150M 150000000 +#define CLOCK_166M 166666666 +#define CLOCK_167M 166666667 +#define CLOCK_196_608M 196608000 +#define CLOCK_200M 200000000 +#define CLOCK_222M 222000000 +#define CLOCK_240M 240000000 +#define CLOCK_250M 250000000 +#define CLOCK_266M 266666666 +#define CLOCK_300M 300000000 +#define CLOCK_333M 333333333 +#define CLOCK_393M 393215332 +#define CLOCK_400M 400000000 +#define CLOCK_450M 450000000 +#define CLOCK_500M 500000000 +#define CLOCK_600M 600000000 + +/* clock out speeds */ +#define CLOCK_32_768K 32768 +#define CLOCK_1_536M 1536000 +#define CLOCK_2_5M 2500000 +#define CLOCK_12M 12000000 +#define CLOCK_24M 24000000 +#define CLOCK_25M 25000000 +#define CLOCK_30M 30000000 +#define CLOCK_40M 40000000 +#define CLOCK_48M 48000000 +#define CLOCK_50M 50000000 +#define CLOCK_60M 60000000 + +struct clk { + struct clk_lookup cl; + unsigned long rate; + unsigned long *rates; + unsigned int module; + unsigned int bits; + unsigned long (*get_rate) (void); + int (*enable) (struct clk *clk); + void (*disable) (struct clk *clk); + int (*activate) (struct clk *clk); + void (*deactivate) (struct clk *clk); + void (*reboot) (struct clk *clk); +}; + +extern void clkdev_add_static(unsigned long cpu, unsigned long fpi, + unsigned long io, unsigned long ppe); + +extern unsigned long ltq_danube_cpu_hz(void); +extern unsigned long ltq_danube_fpi_hz(void); +extern unsigned long ltq_danube_pp32_hz(void); + +extern unsigned long ltq_ar9_cpu_hz(void); +extern unsigned long ltq_ar9_fpi_hz(void); + +extern unsigned long ltq_vr9_cpu_hz(void); +extern unsigned long ltq_vr9_fpi_hz(void); +extern unsigned long ltq_vr9_pp32_hz(void); #endif diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c deleted file mode 100644 index 7b82c34cb16..00000000000 --- a/arch/mips/lantiq/devices.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/reboot.h> -#include <linux/platform_device.h> -#include <linux/leds.h> -#include <linux/etherdevice.h> -#include <linux/reboot.h> -#include <linux/time.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/leds.h> - -#include <asm/bootinfo.h> -#include <asm/irq.h> - -#include <lantiq_soc.h> - -#include "devices.h" - -/* nor flash */ -static struct resource ltq_nor_resource = { - .name = "nor", - .start = LTQ_FLASH_START, - .end = LTQ_FLASH_START + LTQ_FLASH_MAX - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ltq_nor = { - .name = "ltq_nor", - .resource = <q_nor_resource, - .num_resources = 1, -}; - -void __init ltq_register_nor(struct physmap_flash_data *data) -{ - ltq_nor.dev.platform_data = data; - platform_device_register(<q_nor); -} - -/* watchdog */ -static struct resource ltq_wdt_resource = { - .name = "watchdog", - .start = LTQ_WDT_BASE_ADDR, - .end = LTQ_WDT_BASE_ADDR + LTQ_WDT_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -void __init ltq_register_wdt(void) -{ - platform_device_register_simple("ltq_wdt", 0, <q_wdt_resource, 1); -} - -/* asc ports */ -static struct resource ltq_asc0_resources[] = { - { - .name = "asc0", - .start = LTQ_ASC0_BASE_ADDR, - .end = LTQ_ASC0_BASE_ADDR + LTQ_ASC_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - IRQ_RES(tx, LTQ_ASC_TIR(0)), - IRQ_RES(rx, LTQ_ASC_RIR(0)), - IRQ_RES(err, LTQ_ASC_EIR(0)), -}; - -static struct resource ltq_asc1_resources[] = { - { - .name = "asc1", - .start = LTQ_ASC1_BASE_ADDR, - .end = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - IRQ_RES(tx, LTQ_ASC_TIR(1)), - IRQ_RES(rx, LTQ_ASC_RIR(1)), - IRQ_RES(err, LTQ_ASC_EIR(1)), -}; - -void __init ltq_register_asc(int port) -{ - switch (port) { - case 0: - platform_device_register_simple("ltq_asc", 0, - ltq_asc0_resources, ARRAY_SIZE(ltq_asc0_resources)); - break; - case 1: - platform_device_register_simple("ltq_asc", 1, - ltq_asc1_resources, ARRAY_SIZE(ltq_asc1_resources)); - break; - default: - break; - } -} - -#ifdef CONFIG_PCI -/* pci */ -static struct platform_device ltq_pci = { - .name = "ltq_pci", - .num_resources = 0, -}; - -void __init ltq_register_pci(struct ltq_pci_data *data) -{ - ltq_pci.dev.platform_data = data; - platform_device_register(<q_pci); -} -#else -void __init ltq_register_pci(struct ltq_pci_data *data) -{ - pr_err("kernel is compiled without PCI support\n"); -} -#endif diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h deleted file mode 100644 index 2947bb19a52..00000000000 --- a/arch/mips/lantiq/devices.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#ifndef _LTQ_DEVICES_H__ -#define _LTQ_DEVICES_H__ - -#include <lantiq_platform.h> -#include <linux/mtd/physmap.h> - -#define IRQ_RES(resname, irq) \ - {.name = #resname, .start = (irq), .flags = IORESOURCE_IRQ} - -extern void ltq_register_nor(struct physmap_flash_data *data); -extern void ltq_register_wdt(void); -extern void ltq_register_asc(int port); -extern void ltq_register_pci(struct ltq_pci_data *data); - -#endif diff --git a/arch/mips/lantiq/dts/Makefile b/arch/mips/lantiq/dts/Makefile new file mode 100644 index 00000000000..6fa72dd641b --- /dev/null +++ b/arch/mips/lantiq/dts/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o diff --git a/arch/mips/lantiq/dts/danube.dtsi b/arch/mips/lantiq/dts/danube.dtsi new file mode 100644 index 00000000000..d4c59e00370 --- /dev/null +++ b/arch/mips/lantiq/dts/danube.dtsi @@ -0,0 +1,105 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,danube"; + + cpus { + cpu@0 { + compatible = "mips,mips24Kc"; + }; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x120>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xway"; + reg = <0x203000 0x1000>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + }; + + serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + + pci0: pci@E105400 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xE105400 0x400>; /* pci bridge */ + }; + }; +}; diff --git a/arch/mips/lantiq/dts/easy50712.dts b/arch/mips/lantiq/dts/easy50712.dts new file mode 100644 index 00000000000..143b8a37b5e --- /dev/null +++ b/arch/mips/lantiq/dts/easy50712.dts @@ -0,0 +1,114 @@ +/dts-v1/; + +/include/ "danube.dtsi" + +/ { + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + }; + + partition@20000 { + label = "linux"; + reg = <0x20000 0x3d0000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x400000>; + }; + }; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + + etop@E180000 { + compatible = "lantiq,etop-xway"; + reg = <0xE180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <73 78>; + phy-mode = "rmii"; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + stp0: stp@E100BB0 { + #gpio-cells = <2>; + compatible = "lantiq,gpio-stp-xway"; + gpio-controller; + reg = <0xE100BB0 0x40>; + + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; + }; + + pci@E105400 { + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 + >; + gpios-reset = <&gpio 21 0>; + req-mask = <0x1>; /* GNT1 */ + }; + + }; +}; diff --git a/arch/mips/lantiq/early_printk.c b/arch/mips/lantiq/early_printk.c index 972e05f8763..9b28d0940ef 100644 --- a/arch/mips/lantiq/early_printk.c +++ b/arch/mips/lantiq/early_printk.c @@ -6,17 +6,16 @@ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> */ -#include <linux/init.h> #include <linux/cpu.h> - -#include <lantiq.h> #include <lantiq_soc.h> -/* no ioremap possible at this early stage, lets use KSEG1 instead */ -#define LTQ_ASC_BASE KSEG1ADDR(LTQ_ASC1_BASE_ADDR) #define ASC_BUF 1024 -#define LTQ_ASC_FSTAT ((u32 *)(LTQ_ASC_BASE + 0x0048)) -#define LTQ_ASC_TBUF ((u32 *)(LTQ_ASC_BASE + 0x0020)) +#define LTQ_ASC_FSTAT ((u32 *)(LTQ_EARLY_ASC + 0x0048)) +#ifdef __BIG_ENDIAN +#define LTQ_ASC_TBUF ((u32 *)(LTQ_EARLY_ASC + 0x0020 + 3)) +#else +#define LTQ_ASC_TBUF ((u32 *)(LTQ_EARLY_ASC + 0x0020)) +#endif #define TXMASK 0x3F00 #define TXOFFSET 8 @@ -27,7 +26,7 @@ void prom_putchar(char c) local_irq_save(flags); do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET); if (c == '\n') - ltq_w32('\r', LTQ_ASC_TBUF); - ltq_w32(c, LTQ_ASC_TBUF); + ltq_w8('\r', LTQ_ASC_TBUF); + ltq_w8(c, LTQ_ASC_TBUF); local_irq_restore(flags); } diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile new file mode 100644 index 00000000000..ff220f97693 --- /dev/null +++ b/arch/mips/lantiq/falcon/Makefile @@ -0,0 +1 @@ +obj-y := prom.o reset.o sysctrl.o diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c new file mode 100644 index 00000000000..aa949794785 --- /dev/null +++ b/arch/mips/lantiq/falcon/prom.c @@ -0,0 +1,92 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <asm/cacheflush.h> +#include <asm/traps.h> +#include <asm/io.h> + +#include <lantiq_soc.h> + +#include "../prom.h" + +#define SOC_FALCON "Falcon" +#define SOC_FALCON_D "Falcon-D" +#define SOC_FALCON_V "Falcon-V" +#define SOC_FALCON_M "Falcon-M" + +#define COMP_FALCON "lantiq,falcon" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFF000 +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 +#define SREV_SHIFT 22 +#define SREV_MASK 0x03C00000 +#define TYPE_SHIFT 26 +#define TYPE_MASK 0x3C000000 + +/* reset, nmi and ejtag exception vectors */ +#define BOOT_REG_BASE (KSEG1 | 0x1F200000) +#define BOOT_RVEC (BOOT_REG_BASE | 0x00) +#define BOOT_NVEC (BOOT_REG_BASE | 0x04) +#define BOOT_EVEC (BOOT_REG_BASE | 0x08) + +void __init ltq_soc_nmi_setup(void) +{ + extern void (*nmi_handler)(void); + + ltq_w32((unsigned long)&nmi_handler, (void *)BOOT_NVEC); +} + +void __init ltq_soc_ejtag_setup(void) +{ + extern void (*ejtag_debug_handler)(void); + + ltq_w32((unsigned long)&ejtag_debug_handler, (void *)BOOT_EVEC); +} + +void __init ltq_soc_detect(struct ltq_soc_info *i) +{ + u32 type; + i->partnum = (ltq_r32(FALCON_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(FALCON_CHIPID) & REV_MASK) >> REV_SHIFT; + i->srev = ((ltq_r32(FALCON_CHIPCONF) & SREV_MASK) >> SREV_SHIFT); + i->compatible = COMP_FALCON; + i->type = SOC_TYPE_FALCON; + sprintf(i->rev_type, "%c%d%d", (i->srev & 0x4) ? ('B') : ('A'), + i->rev & 0x7, (i->srev & 0x3) + 1); + + switch (i->partnum) { + case SOC_ID_FALCON: + type = (ltq_r32(FALCON_CHIPTYPE) & TYPE_MASK) >> TYPE_SHIFT; + switch (type) { + case 0: + i->name = SOC_FALCON_D; + break; + case 1: + i->name = SOC_FALCON_V; + break; + case 2: + i->name = SOC_FALCON_M; + break; + default: + i->name = SOC_FALCON; + break; + } + break; + + default: + unreachable(); + break; + } + + board_nmi_handler_setup = ltq_soc_nmi_setup; + board_ejtag_handler_setup = ltq_soc_ejtag_setup; +} diff --git a/arch/mips/lantiq/falcon/reset.c b/arch/mips/lantiq/falcon/reset.c new file mode 100644 index 00000000000..56824825342 --- /dev/null +++ b/arch/mips/lantiq/falcon/reset.c @@ -0,0 +1,90 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/pm.h> +#include <asm/reboot.h> +#include <linux/export.h> + +#include <lantiq_soc.h> + +/* CPU0 Reset Source Register */ +#define SYS1_CPU0RS 0x0040 +/* reset cause mask */ +#define CPU0RS_MASK 0x0003 +/* CPU0 Boot Mode Register */ +#define SYS1_BM 0x00a0 +/* boot mode mask */ +#define BM_MASK 0x0005 + +/* allow platform code to find out what surce we booted from */ +unsigned char ltq_boot_select(void) +{ + return ltq_sys1_r32(SYS1_BM) & BM_MASK; +} + +/* allow the watchdog driver to find out what the boot reason was */ +int ltq_reset_cause(void) +{ + return ltq_sys1_r32(SYS1_CPU0RS) & CPU0RS_MASK; +} +EXPORT_SYMBOL_GPL(ltq_reset_cause); + +#define BOOT_REG_BASE (KSEG1 | 0x1F200000) +#define BOOT_PW1_REG (BOOT_REG_BASE | 0x20) +#define BOOT_PW2_REG (BOOT_REG_BASE | 0x24) +#define BOOT_PW1 0x4C545100 +#define BOOT_PW2 0x0051544C + +#define WDT_REG_BASE (KSEG1 | 0x1F8803F0) +#define WDT_PW1 0x00BE0000 +#define WDT_PW2 0x00DC0000 + +static void machine_restart(char *command) +{ + local_irq_disable(); + + /* reboot magic */ + ltq_w32(BOOT_PW1, (void *)BOOT_PW1_REG); /* 'LTQ\0' */ + ltq_w32(BOOT_PW2, (void *)BOOT_PW2_REG); /* '\0QTL' */ + ltq_w32(0, (void *)BOOT_REG_BASE); /* reset Bootreg RVEC */ + + /* watchdog magic */ + ltq_w32(WDT_PW1, (void *)WDT_REG_BASE); + ltq_w32(WDT_PW2 | + (0x3 << 26) | /* PWL */ + (0x2 << 24) | /* CLKDIV */ + (0x1 << 31) | /* enable */ + (1), /* reload */ + (void *)WDT_REG_BASE); + unreachable(); +} + +static void machine_halt(void) +{ + local_irq_disable(); + unreachable(); +} + +static void machine_power_off(void) +{ + local_irq_disable(); + unreachable(); +} + +static int __init mips_reboot_setup(void) +{ + _machine_restart = machine_restart; + _machine_halt = machine_halt; + pm_power_off = machine_power_off; + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c new file mode 100644 index 00000000000..8f1866d8124 --- /dev/null +++ b/arch/mips/lantiq/falcon/sysctrl.c @@ -0,0 +1,264 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/ioport.h> +#include <linux/export.h> +#include <linux/clkdev.h> +#include <linux/of_address.h> +#include <asm/delay.h> + +#include <lantiq_soc.h> + +#include "../clk.h" + +/* infrastructure control register */ +#define SYS1_INFRAC 0x00bc +/* Configuration fuses for drivers and pll */ +#define STATUS_CONFIG 0x0040 + +/* GPE frequency selection */ +#define GPPC_OFFSET 24 +#define GPEFREQ_MASK 0x00000C0 +#define GPEFREQ_OFFSET 10 +/* Clock status register */ +#define SYSCTL_CLKS 0x0000 +/* Clock enable register */ +#define SYSCTL_CLKEN 0x0004 +/* Clock clear register */ +#define SYSCTL_CLKCLR 0x0008 +/* Activation Status Register */ +#define SYSCTL_ACTS 0x0020 +/* Activation Register */ +#define SYSCTL_ACT 0x0024 +/* Deactivation Register */ +#define SYSCTL_DEACT 0x0028 +/* reboot Register */ +#define SYSCTL_RBT 0x002c +/* CPU0 Clock Control Register */ +#define SYS1_CPU0CC 0x0040 +/* HRST_OUT_N Control Register */ +#define SYS1_HRSTOUTC 0x00c0 +/* clock divider bit */ +#define CPU0CC_CPUDIV 0x0001 + +/* Activation Status Register */ +#define ACTS_ASC0_ACT 0x00001000 +#define ACTS_ASC1_ACT 0x00000800 +#define ACTS_I2C_ACT 0x00004000 +#define ACTS_P0 0x00010000 +#define ACTS_P1 0x00010000 +#define ACTS_P2 0x00020000 +#define ACTS_P3 0x00020000 +#define ACTS_P4 0x00040000 +#define ACTS_PADCTRL0 0x00100000 +#define ACTS_PADCTRL1 0x00100000 +#define ACTS_PADCTRL2 0x00200000 +#define ACTS_PADCTRL3 0x00200000 +#define ACTS_PADCTRL4 0x00400000 + +#define sysctl_w32(m, x, y) ltq_w32((x), sysctl_membase[m] + (y)) +#define sysctl_r32(m, x) ltq_r32(sysctl_membase[m] + (x)) +#define sysctl_w32_mask(m, clear, set, reg) \ + sysctl_w32(m, (sysctl_r32(m, reg) & ~(clear)) | (set), reg) + +#define status_w32(x, y) ltq_w32((x), status_membase + (y)) +#define status_r32(x) ltq_r32(status_membase + (x)) + +static void __iomem *sysctl_membase[3], *status_membase; +void __iomem *ltq_sys1_membase, *ltq_ebu_membase; + +void falcon_trigger_hrst(int level) +{ + sysctl_w32(SYSCTL_SYS1, level & 1, SYS1_HRSTOUTC); +} + +static inline void sysctl_wait(struct clk *clk, + unsigned int test, unsigned int reg) +{ + int err = 1000000; + + do {} while (--err && ((sysctl_r32(clk->module, reg) + & clk->bits) != test)); + if (!err) + pr_err("module de/activation failed %d %08X %08X %08X\n", + clk->module, clk->bits, test, + sysctl_r32(clk->module, reg) & clk->bits); +} + +static int sysctl_activate(struct clk *clk) +{ + sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN); + sysctl_w32(clk->module, clk->bits, SYSCTL_ACT); + sysctl_wait(clk, clk->bits, SYSCTL_ACTS); + return 0; +} + +static void sysctl_deactivate(struct clk *clk) +{ + sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR); + sysctl_w32(clk->module, clk->bits, SYSCTL_DEACT); + sysctl_wait(clk, 0, SYSCTL_ACTS); +} + +static int sysctl_clken(struct clk *clk) +{ + sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN); + sysctl_w32(clk->module, clk->bits, SYSCTL_ACT); + sysctl_wait(clk, clk->bits, SYSCTL_CLKS); + return 0; +} + +static void sysctl_clkdis(struct clk *clk) +{ + sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR); + sysctl_wait(clk, 0, SYSCTL_CLKS); +} + +static void sysctl_reboot(struct clk *clk) +{ + unsigned int act; + unsigned int bits; + + act = sysctl_r32(clk->module, SYSCTL_ACT); + bits = ~act & clk->bits; + if (bits != 0) { + sysctl_w32(clk->module, bits, SYSCTL_CLKEN); + sysctl_w32(clk->module, bits, SYSCTL_ACT); + sysctl_wait(clk, bits, SYSCTL_ACTS); + } + sysctl_w32(clk->module, act & clk->bits, SYSCTL_RBT); + sysctl_wait(clk, clk->bits, SYSCTL_ACTS); +} + +/* enable the ONU core */ +static void falcon_gpe_enable(void) +{ + unsigned int freq; + unsigned int status; + + /* if if the clock is already enabled */ + status = sysctl_r32(SYSCTL_SYS1, SYS1_INFRAC); + if (status & (1 << (GPPC_OFFSET + 1))) + return; + + if (status_r32(STATUS_CONFIG) == 0) + freq = 1; /* use 625MHz on unfused chip */ + else + freq = (status_r32(STATUS_CONFIG) & + GPEFREQ_MASK) >> + GPEFREQ_OFFSET; + + /* apply new frequency */ + sysctl_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1), + freq << (GPPC_OFFSET + 2) , SYS1_INFRAC); + udelay(1); + + /* enable new frequency */ + sysctl_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC); + udelay(1); +} + +static inline void clkdev_add_sys(const char *dev, unsigned int module, + unsigned int bits) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev; + clk->cl.con_id = NULL; + clk->cl.clk = clk; + clk->module = module; + clk->bits = bits; + clk->activate = sysctl_activate; + clk->deactivate = sysctl_deactivate; + clk->enable = sysctl_clken; + clk->disable = sysctl_clkdis; + clk->reboot = sysctl_reboot; + clkdev_add(&clk->cl); +} + +void __init ltq_soc_init(void) +{ + struct device_node *np_status = + of_find_compatible_node(NULL, NULL, "lantiq,status-falcon"); + struct device_node *np_ebu = + of_find_compatible_node(NULL, NULL, "lantiq,ebu-falcon"); + struct device_node *np_sys1 = + of_find_compatible_node(NULL, NULL, "lantiq,sys1-falcon"); + struct device_node *np_syseth = + of_find_compatible_node(NULL, NULL, "lantiq,syseth-falcon"); + struct device_node *np_sysgpe = + of_find_compatible_node(NULL, NULL, "lantiq,sysgpe-falcon"); + struct resource res_status, res_ebu, res_sys[3]; + int i; + + /* check if all the core register ranges are available */ + if (!np_status || !np_ebu || !np_sys1 || !np_syseth || !np_sysgpe) + panic("Failed to load core nodes from devicetree"); + + if (of_address_to_resource(np_status, 0, &res_status) || + of_address_to_resource(np_ebu, 0, &res_ebu) || + of_address_to_resource(np_sys1, 0, &res_sys[0]) || + of_address_to_resource(np_syseth, 0, &res_sys[1]) || + of_address_to_resource(np_sysgpe, 0, &res_sys[2])) + panic("Failed to get core resources"); + + if ((request_mem_region(res_status.start, resource_size(&res_status), + res_status.name) < 0) || + (request_mem_region(res_ebu.start, resource_size(&res_ebu), + res_ebu.name) < 0) || + (request_mem_region(res_sys[0].start, + resource_size(&res_sys[0]), + res_sys[0].name) < 0) || + (request_mem_region(res_sys[1].start, + resource_size(&res_sys[1]), + res_sys[1].name) < 0) || + (request_mem_region(res_sys[2].start, + resource_size(&res_sys[2]), + res_sys[2].name) < 0)) + pr_err("Failed to request core reources"); + + status_membase = ioremap_nocache(res_status.start, + resource_size(&res_status)); + ltq_ebu_membase = ioremap_nocache(res_ebu.start, + resource_size(&res_ebu)); + + if (!status_membase || !ltq_ebu_membase) + panic("Failed to remap core resources"); + + for (i = 0; i < 3; i++) { + sysctl_membase[i] = ioremap_nocache(res_sys[i].start, + resource_size(&res_sys[i])); + if (!sysctl_membase[i]) + panic("Failed to remap sysctrl resources"); + } + ltq_sys1_membase = sysctl_membase[0]; + + falcon_gpe_enable(); + + /* get our 3 static rates for cpu, fpi and io clocks */ + if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV) + clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M, 0); + else + clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M, 0); + + /* add our clock domains */ + clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0); + clkdev_add_sys("1d810100.gpio", SYSCTL_SYSETH, ACTS_P2); + clkdev_add_sys("1e800100.gpio", SYSCTL_SYS1, ACTS_P1); + clkdev_add_sys("1e800200.gpio", SYSCTL_SYS1, ACTS_P3); + clkdev_add_sys("1e800300.gpio", SYSCTL_SYS1, ACTS_P4); + clkdev_add_sys("1db01000.pad", SYSCTL_SYSETH, ACTS_PADCTRL0); + clkdev_add_sys("1db02000.pad", SYSCTL_SYSETH, ACTS_PADCTRL2); + clkdev_add_sys("1e800400.pad", SYSCTL_SYS1, ACTS_PADCTRL1); + clkdev_add_sys("1e800500.pad", SYSCTL_SYS1, ACTS_PADCTRL3); + clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4); + clkdev_add_sys("1e100b00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT); + clkdev_add_sys("1e100c00.serial", SYSCTL_SYS1, ACTS_ASC0_ACT); + clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT); +} diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index fc89795cafd..030568a70ac 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -9,6 +9,11 @@ #include <linux/interrupt.h> #include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/irqdomain.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/bootinfo.h> #include <asm/irq_cpu.h> @@ -16,7 +21,7 @@ #include <lantiq_soc.h> #include <irq.h> -/* register definitions */ +/* register definitions - internal irqs */ #define LTQ_ICU_IM0_ISR 0x0000 #define LTQ_ICU_IM0_IER 0x0008 #define LTQ_ICU_IM0_IOSR 0x0010 @@ -25,117 +30,157 @@ #define LTQ_ICU_IM1_ISR 0x0028 #define LTQ_ICU_OFFSET (LTQ_ICU_IM1_ISR - LTQ_ICU_IM0_ISR) +/* register definitions - external irqs */ #define LTQ_EIU_EXIN_C 0x0000 #define LTQ_EIU_EXIN_INIC 0x0004 +#define LTQ_EIU_EXIN_INC 0x0008 #define LTQ_EIU_EXIN_INEN 0x000C -/* irq numbers used by the external interrupt unit (EIU) */ -#define LTQ_EIU_IR0 (INT_NUM_IM4_IRL0 + 30) -#define LTQ_EIU_IR1 (INT_NUM_IM3_IRL0 + 31) -#define LTQ_EIU_IR2 (INT_NUM_IM1_IRL0 + 26) -#define LTQ_EIU_IR3 INT_NUM_IM1_IRL0 -#define LTQ_EIU_IR4 (INT_NUM_IM1_IRL0 + 1) -#define LTQ_EIU_IR5 (INT_NUM_IM1_IRL0 + 2) -#define LTQ_EIU_IR6 (INT_NUM_IM2_IRL0 + 30) - +/* number of external interrupts */ #define MAX_EIU 6 -/* irqs generated by device attached to the EBU need to be acked in +/* the performance counter */ +#define LTQ_PERF_IRQ (INT_NUM_IM4_IRL0 + 31) + +/* + * irqs generated by devices attached to the EBU need to be acked in * a special manner */ #define LTQ_ICU_EBU_IRQ 22 -#define ltq_icu_w32(x, y) ltq_w32((x), ltq_icu_membase + (y)) -#define ltq_icu_r32(x) ltq_r32(ltq_icu_membase + (x)) +#define ltq_icu_w32(m, x, y) ltq_w32((x), ltq_icu_membase[m] + (y)) +#define ltq_icu_r32(m, x) ltq_r32(ltq_icu_membase[m] + (x)) #define ltq_eiu_w32(x, y) ltq_w32((x), ltq_eiu_membase + (y)) #define ltq_eiu_r32(x) ltq_r32(ltq_eiu_membase + (x)) -static unsigned short ltq_eiu_irq[MAX_EIU] = { - LTQ_EIU_IR0, - LTQ_EIU_IR1, - LTQ_EIU_IR2, - LTQ_EIU_IR3, - LTQ_EIU_IR4, - LTQ_EIU_IR5, -}; +/* our 2 ipi interrupts for VSMP */ +#define MIPS_CPU_IPI_RESCHED_IRQ 0 +#define MIPS_CPU_IPI_CALL_IRQ 1 -static struct resource ltq_icu_resource = { - .name = "icu", - .start = LTQ_ICU_BASE_ADDR, - .end = LTQ_ICU_BASE_ADDR + LTQ_ICU_SIZE - 1, - .flags = IORESOURCE_MEM, -}; +/* we have a cascade of 8 irqs */ +#define MIPS_CPU_IRQ_CASCADE 8 -static struct resource ltq_eiu_resource = { - .name = "eiu", - .start = LTQ_EIU_BASE_ADDR, - .end = LTQ_EIU_BASE_ADDR + LTQ_ICU_SIZE - 1, - .flags = IORESOURCE_MEM, -}; +#ifdef CONFIG_MIPS_MT_SMP +int gic_present; +#endif -static void __iomem *ltq_icu_membase; +static int exin_avail; +static struct resource ltq_eiu_irq[MAX_EIU]; +static void __iomem *ltq_icu_membase[MAX_IM]; static void __iomem *ltq_eiu_membase; +static struct irq_domain *ltq_domain; + +int ltq_eiu_get_irq(int exin) +{ + if (exin < exin_avail) + return ltq_eiu_irq[exin].start; + return -1; +} void ltq_disable_irq(struct irq_data *d) { u32 ier = LTQ_ICU_IM0_IER; - int irq_nr = d->irq - INT_NUM_IRQ0; + int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE; + int im = offset / INT_NUM_IM_OFFSET; - ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); - irq_nr %= INT_NUM_IM_OFFSET; - ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier); + offset %= INT_NUM_IM_OFFSET; + ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); } void ltq_mask_and_ack_irq(struct irq_data *d) { u32 ier = LTQ_ICU_IM0_IER; u32 isr = LTQ_ICU_IM0_ISR; - int irq_nr = d->irq - INT_NUM_IRQ0; + int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE; + int im = offset / INT_NUM_IM_OFFSET; - ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); - isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); - irq_nr %= INT_NUM_IM_OFFSET; - ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier); - ltq_icu_w32((1 << irq_nr), isr); + offset %= INT_NUM_IM_OFFSET; + ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); + ltq_icu_w32(im, BIT(offset), isr); } static void ltq_ack_irq(struct irq_data *d) { u32 isr = LTQ_ICU_IM0_ISR; - int irq_nr = d->irq - INT_NUM_IRQ0; + int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE; + int im = offset / INT_NUM_IM_OFFSET; - isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); - irq_nr %= INT_NUM_IM_OFFSET; - ltq_icu_w32((1 << irq_nr), isr); + offset %= INT_NUM_IM_OFFSET; + ltq_icu_w32(im, BIT(offset), isr); } void ltq_enable_irq(struct irq_data *d) { u32 ier = LTQ_ICU_IM0_IER; - int irq_nr = d->irq - INT_NUM_IRQ0; + int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE; + int im = offset / INT_NUM_IM_OFFSET; + + offset %= INT_NUM_IM_OFFSET; + ltq_icu_w32(im, ltq_icu_r32(im, ier) | BIT(offset), ier); +} + +static int ltq_eiu_settype(struct irq_data *d, unsigned int type) +{ + int i; + + for (i = 0; i < MAX_EIU; i++) { + if (d->hwirq == ltq_eiu_irq[i].start) { + int val = 0; + int edge = 0; + + switch (type) { + case IRQF_TRIGGER_NONE: + break; + case IRQF_TRIGGER_RISING: + val = 1; + edge = 1; + break; + case IRQF_TRIGGER_FALLING: + val = 2; + edge = 1; + break; + case IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING: + val = 3; + edge = 1; + break; + case IRQF_TRIGGER_HIGH: + val = 5; + break; + case IRQF_TRIGGER_LOW: + val = 6; + break; + default: + pr_err("invalid type %d for irq %ld\n", + type, d->hwirq); + return -EINVAL; + } + + if (edge) + irq_set_handler(d->hwirq, handle_edge_irq); + + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | + (val << (i * 4)), LTQ_EIU_EXIN_C); + } + } - ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); - irq_nr %= INT_NUM_IM_OFFSET; - ltq_icu_w32(ltq_icu_r32(ier) | (1 << irq_nr), ier); + return 0; } static unsigned int ltq_startup_eiu_irq(struct irq_data *d) { int i; - int irq_nr = d->irq - INT_NUM_IRQ0; ltq_enable_irq(d); for (i = 0; i < MAX_EIU; i++) { - if (irq_nr == ltq_eiu_irq[i]) { - /* low level - we should really handle set_type */ - ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | - (0x6 << (i * 4)), LTQ_EIU_EXIN_C); + if (d->hwirq == ltq_eiu_irq[i].start) { + /* by default we are low level triggered */ + ltq_eiu_settype(d, IRQF_TRIGGER_LOW); /* clear all pending */ - ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~(1 << i), - LTQ_EIU_EXIN_INIC); + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INC) & ~BIT(i), + LTQ_EIU_EXIN_INC); /* enable */ - ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | (1 << i), + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | BIT(i), LTQ_EIU_EXIN_INEN); break; } @@ -147,13 +192,12 @@ static unsigned int ltq_startup_eiu_irq(struct irq_data *d) static void ltq_shutdown_eiu_irq(struct irq_data *d) { int i; - int irq_nr = d->irq - INT_NUM_IRQ0; ltq_disable_irq(d); for (i = 0; i < MAX_EIU; i++) { - if (irq_nr == ltq_eiu_irq[i]) { + if (d->hwirq == ltq_eiu_irq[i].start) { /* disable */ - ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~(1 << i), + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~BIT(i), LTQ_EIU_EXIN_INEN); break; } @@ -180,24 +224,26 @@ static struct irq_chip ltq_eiu_type = { .irq_ack = ltq_ack_irq, .irq_mask = ltq_disable_irq, .irq_mask_ack = ltq_mask_and_ack_irq, + .irq_set_type = ltq_eiu_settype, }; static void ltq_hw_irqdispatch(int module) { u32 irq; - irq = ltq_icu_r32(LTQ_ICU_IM0_IOSR + (module * LTQ_ICU_OFFSET)); + irq = ltq_icu_r32(module, LTQ_ICU_IM0_IOSR); if (irq == 0) return; - /* silicon bug causes only the msb set to 1 to be valid. all + /* + * silicon bug causes only the msb set to 1 to be valid. all * other bits might be bogus */ irq = __fls(irq); - do_IRQ((int)irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module)); + do_IRQ((int)irq + MIPS_CPU_IRQ_CASCADE + (INT_NUM_IM_OFFSET * module)); /* if this is a EBU irq, we need to ack it or get a deadlock */ - if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0)) + if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT) ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_ISTAT) | 0x10, LTQ_EBU_PCC_ISTAT); } @@ -213,21 +259,66 @@ DEFINE_HWx_IRQDISPATCH(2) DEFINE_HWx_IRQDISPATCH(3) DEFINE_HWx_IRQDISPATCH(4) +#if MIPS_CPU_TIMER_IRQ == 7 static void ltq_hw5_irqdispatch(void) { do_IRQ(MIPS_CPU_TIMER_IRQ); } +#else +DEFINE_HWx_IRQDISPATCH(5) +#endif + +#ifdef CONFIG_MIPS_MT_SMP +void __init arch_init_ipiirq(int irq, struct irqaction *action) +{ + setup_irq(irq, action); + irq_set_handler(irq, handle_percpu_irq); +} + +static void ltq_sw0_irqdispatch(void) +{ + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); +} + +static void ltq_sw1_irqdispatch(void) +{ + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); +} +static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) +{ + scheduler_ipi(); + return IRQ_HANDLED; +} + +static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) +{ + smp_call_function_interrupt(); + return IRQ_HANDLED; +} + +static struct irqaction irq_resched = { + .handler = ipi_resched_interrupt, + .flags = IRQF_PERCPU, + .name = "IPI_resched" +}; + +static struct irqaction irq_call = { + .handler = ipi_call_interrupt, + .flags = IRQF_PERCPU, + .name = "IPI_call" +}; +#endif asmlinkage void plat_irq_dispatch(void) { unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; unsigned int i; - if (pending & CAUSEF_IP7) { + if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) { do_IRQ(MIPS_CPU_TIMER_IRQ); goto out; } else { - for (i = 0; i < 5; i++) { + for (i = 0; i < MAX_IM; i++) { if (pending & (CAUSEF_IP2 << i)) { ltq_hw_irqdispatch(i); goto out; @@ -240,51 +331,89 @@ out: return; } +static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) +{ + struct irq_chip *chip = <q_irq_type; + int i; + + if (hw < MIPS_CPU_IRQ_CASCADE) + return 0; + + for (i = 0; i < exin_avail; i++) + if (hw == ltq_eiu_irq[i].start) + chip = <q_eiu_type; + + irq_set_chip_and_handler(hw, chip, handle_level_irq); + + return 0; +} + +static const struct irq_domain_ops irq_domain_ops = { + .xlate = irq_domain_xlate_onetwocell, + .map = icu_map, +}; + static struct irqaction cascade = { .handler = no_action, - .flags = IRQF_DISABLED, .name = "cascade", }; -void __init arch_init_irq(void) +int __init icu_of_init(struct device_node *node, struct device_node *parent) { - int i; - - if (insert_resource(&iomem_resource, <q_icu_resource) < 0) - panic("Failed to insert icu memory\n"); - - if (request_mem_region(ltq_icu_resource.start, - resource_size(<q_icu_resource), "icu") < 0) - panic("Failed to request icu memory\n"); + struct device_node *eiu_node; + struct resource res; + int i, ret; + + for (i = 0; i < MAX_IM; i++) { + if (of_address_to_resource(node, i, &res)) + panic("Failed to get icu memory range"); + + if (request_mem_region(res.start, resource_size(&res), + res.name) < 0) + pr_err("Failed to request icu memory"); + + ltq_icu_membase[i] = ioremap_nocache(res.start, + resource_size(&res)); + if (!ltq_icu_membase[i]) + panic("Failed to remap icu memory"); + } - ltq_icu_membase = ioremap_nocache(ltq_icu_resource.start, - resource_size(<q_icu_resource)); - if (!ltq_icu_membase) - panic("Failed to remap icu memory\n"); + /* the external interrupts are optional and xway only */ + eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway"); + if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) { + /* find out how many external irq sources we have */ + exin_avail = of_irq_count(eiu_node); - if (insert_resource(&iomem_resource, <q_eiu_resource) < 0) - panic("Failed to insert eiu memory\n"); + if (exin_avail > MAX_EIU) + exin_avail = MAX_EIU; - if (request_mem_region(ltq_eiu_resource.start, - resource_size(<q_eiu_resource), "eiu") < 0) - panic("Failed to request eiu memory\n"); + ret = of_irq_to_resource_table(eiu_node, + ltq_eiu_irq, exin_avail); + if (ret != exin_avail) + panic("failed to load external irq resources"); - ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start, - resource_size(<q_eiu_resource)); - if (!ltq_eiu_membase) - panic("Failed to remap eiu memory\n"); + if (request_mem_region(res.start, resource_size(&res), + res.name) < 0) + pr_err("Failed to request eiu memory"); - /* make sure all irqs are turned off by default */ - for (i = 0; i < 5; i++) - ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET)); + ltq_eiu_membase = ioremap_nocache(res.start, + resource_size(&res)); + if (!ltq_eiu_membase) + panic("Failed to remap eiu memory"); + } - /* clear all possibly pending interrupts */ - ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET)); + /* turn off all irqs by default */ + for (i = 0; i < MAX_IM; i++) { + /* make sure all irqs are turned off by default */ + ltq_icu_w32(i, 0, LTQ_ICU_IM0_IER); + /* clear all possibly pending interrupts */ + ltq_icu_w32(i, ~0, LTQ_ICU_IM0_ISR); + } mips_cpu_irq_init(); - for (i = 2; i <= 6; i++) - setup_irq(i, &cascade); + for (i = 0; i < MAX_IM; i++) + setup_irq(i + 2, &cascade); if (cpu_has_vint) { pr_info("Setting up vectored interrupts\n"); @@ -296,31 +425,53 @@ void __init arch_init_irq(void) set_vi_handler(7, ltq_hw5_irqdispatch); } - for (i = INT_NUM_IRQ0; - i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++) - if ((i == LTQ_EIU_IR0) || (i == LTQ_EIU_IR1) || - (i == LTQ_EIU_IR2)) - irq_set_chip_and_handler(i, <q_eiu_type, - handle_level_irq); - /* EIU3-5 only exist on ar9 and vr9 */ - else if (((i == LTQ_EIU_IR3) || (i == LTQ_EIU_IR4) || - (i == LTQ_EIU_IR5)) && (ltq_is_ar9() || ltq_is_vr9())) - irq_set_chip_and_handler(i, <q_eiu_type, - handle_level_irq); - else - irq_set_chip_and_handler(i, <q_irq_type, - handle_level_irq); - -#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC) + ltq_domain = irq_domain_add_linear(node, + (MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE, + &irq_domain_ops, 0); + +#if defined(CONFIG_MIPS_MT_SMP) + if (cpu_has_vint) { + pr_info("Setting up IPI vectored interrupts\n"); + set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ltq_sw0_irqdispatch); + set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ltq_sw1_irqdispatch); + } + arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ, + &irq_resched); + arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ, &irq_call); +#endif + +#ifndef CONFIG_MIPS_MT_SMP set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5); #else set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5); #endif + + /* tell oprofile which irq to use */ + cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ); + + /* + * if the timer irq is not one of the mips irqs we need to + * create a mapping + */ + if (MIPS_CPU_TIMER_IRQ != 7) + irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ); + + return 0; +} + +unsigned int get_c0_compare_int(void) +{ + return MIPS_CPU_TIMER_IRQ; } -unsigned int __cpuinit get_c0_compare_int(void) +static struct of_device_id __initdata of_irq_ids[] = { + { .compatible = "lantiq,icu", .data = icu_of_init }, + {}, +}; + +void __init arch_init_irq(void) { - return CP0_LEGACY_COMPARE_IRQ; + of_irq_init(of_irq_ids); } diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h deleted file mode 100644 index 7e01b8c484e..00000000000 --- a/arch/mips/lantiq/machtypes.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#ifndef _LANTIQ_MACH_H__ -#define _LANTIQ_MACH_H__ - -#include <asm/mips_machine.h> - -enum lantiq_mach_type { - LTQ_MACH_GENERIC = 0, - LTQ_MACH_EASY50712, /* Danube evaluation board */ - LTQ_MACH_EASY50601, /* Amazon SE evaluation board */ -}; - -#endif diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index 56ba007bf1e..7447d322d14 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -6,29 +6,30 @@ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/clk.h> +#include <linux/bootmem.h> +#include <linux/of_platform.h> +#include <linux/of_fdt.h> + #include <asm/bootinfo.h> #include <asm/time.h> +#include <asm/prom.h> #include <lantiq.h> #include "prom.h" #include "clk.h" -static struct ltq_soc_info soc_info; +/* access to the ebu needs to be locked between different drivers */ +DEFINE_SPINLOCK(ebu_lock); +EXPORT_SYMBOL_GPL(ebu_lock); -unsigned int ltq_get_cpu_ver(void) -{ - return soc_info.rev; -} -EXPORT_SYMBOL(ltq_get_cpu_ver); - -unsigned int ltq_get_soc_type(void) -{ - return soc_info.type; -} -EXPORT_SYMBOL(ltq_get_soc_type); +/* + * this struct is filled by the soc specific detection code and holds + * information about the specific soc type, revision and name + */ +static struct ltq_soc_info soc_info; const char *get_system_type(void) { @@ -45,27 +46,67 @@ static void __init prom_init_cmdline(void) char **argv = (char **) KSEG1ADDR(fw_arg1); int i; + arcs_cmdline[0] = '\0'; + for (i = 0; i < argc; i++) { - char *p = (char *) KSEG1ADDR(argv[i]); + char *p = (char *) KSEG1ADDR(argv[i]); - if (p && *p) { + if (CPHYSADDR(p) && *p) { strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); } } } -void __init prom_init(void) +void __init plat_mem_setup(void) { - struct clk *clk; + ioport_resource.start = IOPORT_RESOURCE_START; + ioport_resource.end = IOPORT_RESOURCE_END; + iomem_resource.start = IOMEM_RESOURCE_START; + iomem_resource.end = IOMEM_RESOURCE_END; + + set_io_port_base((unsigned long) KSEG1); + /* + * Load the builtin devicetree. This causes the chosen node to be + * parsed resulting in our memory appearing + */ + __dt_setup_arch(__dtb_start); +} + +void __init device_tree_init(void) +{ + unflatten_and_copy_device_tree(); +} + +void __init prom_init(void) +{ + /* call the soc specific detetcion code and get it to fill soc_info */ ltq_soc_detect(&soc_info); - clk_init(); - clk = clk_get(0, "cpu"); - snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d", - soc_info.name, soc_info.rev); - clk_put(clk); + snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s", + soc_info.name, soc_info.rev_type); soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0'; pr_info("SoC: %s\n", soc_info.sys_type); prom_init_cmdline(); + +#if defined(CONFIG_MIPS_MT_SMP) + if (register_vsmp_smp_ops()) + panic("failed to register_vsmp_smp_ops()"); +#endif } + +int __init plat_of_setup(void) +{ + static struct of_device_id of_ids[3]; + + if (!of_have_populated_dt()) + panic("device tree not present"); + + strlcpy(of_ids[0].compatible, soc_info.compatible, + sizeof(of_ids[0].compatible)); + strncpy(of_ids[1].compatible, "simple-bus", + sizeof(of_ids[1].compatible)); + return of_platform_populate(NULL, of_ids, NULL, NULL); +} + +arch_initcall(plat_of_setup); diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h index b4229d94280..bfd2d58c1d6 100644 --- a/arch/mips/lantiq/prom.h +++ b/arch/mips/lantiq/prom.h @@ -10,16 +10,20 @@ #define _LTQ_PROM_H__ #define LTQ_SYS_TYPE_LEN 0x100 +#define LTQ_SYS_REV_LEN 0x10 struct ltq_soc_info { unsigned char *name; unsigned int rev; + unsigned char rev_type[LTQ_SYS_REV_LEN]; + unsigned int srev; unsigned int partnum; unsigned int type; unsigned char sys_type[LTQ_SYS_TYPE_LEN]; + unsigned char *compatible; }; extern void ltq_soc_detect(struct ltq_soc_info *i); -extern void ltq_soc_setup(void); +extern void ltq_soc_init(void); #endif diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c deleted file mode 100644 index 9b8af77ed0f..00000000000 --- a/arch/mips/lantiq/setup.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/ioport.h> -#include <asm/bootinfo.h> - -#include <lantiq_soc.h> - -#include "machtypes.h" -#include "devices.h" -#include "prom.h" - -void __init plat_mem_setup(void) -{ - /* assume 16M as default incase uboot fails to pass proper ramsize */ - unsigned long memsize = 16; - char **envp = (char **) KSEG1ADDR(fw_arg2); - - ioport_resource.start = IOPORT_RESOURCE_START; - ioport_resource.end = IOPORT_RESOURCE_END; - iomem_resource.start = IOMEM_RESOURCE_START; - iomem_resource.end = IOMEM_RESOURCE_END; - - set_io_port_base((unsigned long) KSEG1); - - while (*envp) { - char *e = (char *)KSEG1ADDR(*envp); - if (!strncmp(e, "memsize=", 8)) { - e += 8; - if (strict_strtoul(e, 0, &memsize)) - pr_warn("bad memsize specified\n"); - } - envp++; - } - memsize *= 1024 * 1024; - add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); -} - -static int __init -lantiq_setup(void) -{ - ltq_soc_setup(); - mips_machine_setup(); - return 0; -} - -arch_initcall(lantiq_setup); - -static void __init -lantiq_generic_init(void) -{ - /* Nothing to do */ -} - -MIPS_MACHINE(LTQ_MACH_GENERIC, - "Generic", - "Generic Lantiq based board", - lantiq_generic_init); diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig deleted file mode 100644 index 2b857de3662..00000000000 --- a/arch/mips/lantiq/xway/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -if SOC_XWAY - -menu "MIPS Machine" - -config LANTIQ_MACH_EASY50712 - bool "Easy50712 - Danube" - default y - -endmenu - -endif - -if SOC_AMAZON_SE - -menu "MIPS Machine" - -config LANTIQ_MACH_EASY50601 - bool "Easy50601 - Amazon SE" - default y - -endmenu - -endif diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile index c517f2e7756..087497d9735 100644 --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile @@ -1,7 +1,3 @@ -obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o +obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o -obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o -obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o - -obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o -obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o +obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c deleted file mode 100644 index 22d823acd53..00000000000 --- a/arch/mips/lantiq/xway/clk-ase.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2011 John Crispin <blogic@openwrt.org> - */ - -#include <linux/io.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/clk.h> - -#include <asm/time.h> -#include <asm/irq.h> -#include <asm/div64.h> - -#include <lantiq_soc.h> - -/* cgu registers */ -#define LTQ_CGU_SYS 0x0010 - -unsigned int ltq_get_io_region_clock(void) -{ - return CLOCK_133M; -} -EXPORT_SYMBOL(ltq_get_io_region_clock); - -unsigned int ltq_get_fpi_bus_clock(int fpi) -{ - return CLOCK_133M; -} -EXPORT_SYMBOL(ltq_get_fpi_bus_clock); - -unsigned int ltq_get_cpu_hz(void) -{ - if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5)) - return CLOCK_266M; - else - return CLOCK_133M; -} -EXPORT_SYMBOL(ltq_get_cpu_hz); - -unsigned int ltq_get_fpi_hz(void) -{ - return CLOCK_133M; -} -EXPORT_SYMBOL(ltq_get_fpi_hz); diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c deleted file mode 100644 index ddd39593c58..00000000000 --- a/arch/mips/lantiq/xway/clk-xway.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/io.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/clk.h> - -#include <asm/time.h> -#include <asm/irq.h> -#include <asm/div64.h> - -#include <lantiq_soc.h> - -static unsigned int ltq_ram_clocks[] = { - CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M }; -#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3] - -#define BASIC_FREQUENCY_1 35328000 -#define BASIC_FREQUENCY_2 36000000 -#define BASIS_REQUENCY_USB 12000000 - -#define GET_BITS(x, msb, lsb) \ - (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) - -#define LTQ_CGU_PLL0_CFG 0x0004 -#define LTQ_CGU_PLL1_CFG 0x0008 -#define LTQ_CGU_PLL2_CFG 0x000C -#define LTQ_CGU_SYS 0x0010 -#define LTQ_CGU_UPDATE 0x0014 -#define LTQ_CGU_IF_CLK 0x0018 -#define LTQ_CGU_OSC_CON 0x001C -#define LTQ_CGU_SMD 0x0020 -#define LTQ_CGU_CT1SR 0x0028 -#define LTQ_CGU_CT2SR 0x002C -#define LTQ_CGU_PCMCR 0x0030 -#define LTQ_CGU_PCI_CR 0x0034 -#define LTQ_CGU_PD_PC 0x0038 -#define LTQ_CGU_FMR 0x003C - -#define CGU_PLL0_PHASE_DIVIDER_ENABLE \ - (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31)) -#define CGU_PLL0_BYPASS \ - (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30)) -#define CGU_PLL0_CFG_DSMSEL \ - (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28)) -#define CGU_PLL0_CFG_FRAC_EN \ - (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27)) -#define CGU_PLL1_SRC \ - (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31)) -#define CGU_PLL2_PHASE_DIVIDER_ENABLE \ - (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20)) -#define CGU_SYS_FPI_SEL (1 << 6) -#define CGU_SYS_DDR_SEL 0x3 -#define CGU_PLL0_SRC (1 << 29) - -#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17) -#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6) -#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2) -#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17) -#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13) - -static unsigned int ltq_get_pll0_fdiv(void); - -static inline unsigned int get_input_clock(int pll) -{ - switch (pll) { - case 0: - if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC) - return BASIS_REQUENCY_USB; - else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) - return BASIC_FREQUENCY_1; - else - return BASIC_FREQUENCY_2; - case 1: - if (CGU_PLL1_SRC) - return BASIS_REQUENCY_USB; - else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) - return BASIC_FREQUENCY_1; - else - return BASIC_FREQUENCY_2; - case 2: - switch (CGU_PLL2_SRC) { - case 0: - return ltq_get_pll0_fdiv(); - case 1: - return CGU_PLL2_PHASE_DIVIDER_ENABLE ? - BASIC_FREQUENCY_1 : - BASIC_FREQUENCY_2; - case 2: - return BASIS_REQUENCY_USB; - } - default: - return 0; - } -} - -static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den) -{ - u64 res, clock = get_input_clock(pll); - - res = num * clock; - do_div(res, den); - return res; -} - -static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N, - unsigned int K) -{ - unsigned int num = ((N + 1) << 10) + K; - unsigned int den = (M + 1) << 10; - - return cal_dsm(pll, num, den); -} - -static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N, - unsigned int K) -{ - unsigned int num = ((N + 1) << 11) + K + 512; - unsigned int den = (M + 1) << 11; - - return cal_dsm(pll, num, den); -} - -static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N, - unsigned int K) -{ - unsigned int num = K >= 512 ? - ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584; - unsigned int den = (M + 1) << 12; - - return cal_dsm(pll, num, den); -} - -static inline unsigned int dsm(int pll, unsigned int M, unsigned int N, - unsigned int K, unsigned int dsmsel, unsigned int phase_div_en) -{ - if (!dsmsel) - return mash_dsm(pll, M, N, K); - else if (!phase_div_en) - return mash_dsm(pll, M, N, K); - else - return ssff_dsm_2(pll, M, N, K); -} - -static inline unsigned int ltq_get_pll0_fosc(void) -{ - if (CGU_PLL0_BYPASS) - return get_input_clock(0); - else - return !CGU_PLL0_CFG_FRAC_EN - ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0, - CGU_PLL0_CFG_DSMSEL, - CGU_PLL0_PHASE_DIVIDER_ENABLE) - : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, - CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL, - CGU_PLL0_PHASE_DIVIDER_ENABLE); -} - -static unsigned int ltq_get_pll0_fdiv(void) -{ - unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1; - - return (ltq_get_pll0_fosc() + (div >> 1)) / div; -} - -unsigned int ltq_get_io_region_clock(void) -{ - unsigned int ret = ltq_get_pll0_fosc(); - - switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) { - default: - case 0: - return (ret + 1) / 2; - case 1: - return (ret * 2 + 2) / 5; - case 2: - return (ret + 1) / 3; - case 3: - return (ret + 2) / 4; - } -} -EXPORT_SYMBOL(ltq_get_io_region_clock); - -unsigned int ltq_get_fpi_bus_clock(int fpi) -{ - unsigned int ret = ltq_get_io_region_clock(); - - if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL)) - ret >>= 1; - return ret; -} -EXPORT_SYMBOL(ltq_get_fpi_bus_clock); - -unsigned int ltq_get_cpu_hz(void) -{ - switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) { - case 0: - return CLOCK_333M; - case 4: - return DDR_HZ; - case 8: - return DDR_HZ << 1; - default: - return DDR_HZ >> 1; - } -} -EXPORT_SYMBOL(ltq_get_cpu_hz); - -unsigned int ltq_get_fpi_hz(void) -{ - unsigned int ddr_clock = DDR_HZ; - - if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40) - return ddr_clock >> 1; - return ddr_clock; -} -EXPORT_SYMBOL(ltq_get_fpi_hz); diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c new file mode 100644 index 00000000000..8750dc0a1bf --- /dev/null +++ b/arch/mips/lantiq/xway/clk.c @@ -0,0 +1,193 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/export.h> +#include <linux/clk.h> + +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> + +#include "../clk.h" + +static unsigned int ram_clocks[] = { + CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M }; +#define DDR_HZ ram_clocks[ltq_cgu_r32(CGU_SYS) & 0x3] + +/* legacy xway clock */ +#define CGU_SYS 0x10 + +/* vr9 clock */ +#define CGU_SYS_VR9 0x0c +#define CGU_IF_CLK_VR9 0x24 + +unsigned long ltq_danube_fpi_hz(void) +{ + unsigned long ddr_clock = DDR_HZ; + + if (ltq_cgu_r32(CGU_SYS) & 0x40) + return ddr_clock >> 1; + return ddr_clock; +} + +unsigned long ltq_danube_cpu_hz(void) +{ + switch (ltq_cgu_r32(CGU_SYS) & 0xc) { + case 0: + return CLOCK_333M; + case 4: + return DDR_HZ; + case 8: + return DDR_HZ << 1; + default: + return DDR_HZ >> 1; + } +} + +unsigned long ltq_danube_pp32_hz(void) +{ + unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 7) & 3; + unsigned long clk; + + switch (clksys) { + case 1: + clk = CLOCK_240M; + break; + case 2: + clk = CLOCK_222M; + break; + case 3: + clk = CLOCK_133M; + break; + default: + clk = CLOCK_266M; + break; + } + + return clk; +} + +unsigned long ltq_ar9_sys_hz(void) +{ + if (((ltq_cgu_r32(CGU_SYS) >> 3) & 0x3) == 0x2) + return CLOCK_393M; + return CLOCK_333M; +} + +unsigned long ltq_ar9_fpi_hz(void) +{ + unsigned long sys = ltq_ar9_sys_hz(); + + if (ltq_cgu_r32(CGU_SYS) & BIT(0)) + return sys; + return sys >> 1; +} + +unsigned long ltq_ar9_cpu_hz(void) +{ + if (ltq_cgu_r32(CGU_SYS) & BIT(2)) + return ltq_ar9_fpi_hz(); + else + return ltq_ar9_sys_hz(); +} + +unsigned long ltq_vr9_cpu_hz(void) +{ + unsigned int cpu_sel; + unsigned long clk; + + cpu_sel = (ltq_cgu_r32(CGU_SYS_VR9) >> 4) & 0xf; + + switch (cpu_sel) { + case 0: + clk = CLOCK_600M; + break; + case 1: + clk = CLOCK_500M; + break; + case 2: + clk = CLOCK_393M; + break; + case 3: + clk = CLOCK_333M; + break; + case 5: + case 6: + clk = CLOCK_196_608M; + break; + case 7: + clk = CLOCK_167M; + break; + case 4: + case 8: + case 9: + clk = CLOCK_125M; + break; + default: + clk = 0; + break; + } + + return clk; +} + +unsigned long ltq_vr9_fpi_hz(void) +{ + unsigned int ocp_sel, cpu_clk; + unsigned long clk; + + cpu_clk = ltq_vr9_cpu_hz(); + ocp_sel = ltq_cgu_r32(CGU_SYS_VR9) & 0x3; + + switch (ocp_sel) { + case 0: + /* OCP ratio 1 */ + clk = cpu_clk; + break; + case 2: + /* OCP ratio 2 */ + clk = cpu_clk / 2; + break; + case 3: + /* OCP ratio 2.5 */ + clk = (cpu_clk * 2) / 5; + break; + case 4: + /* OCP ratio 3 */ + clk = cpu_clk / 3; + break; + default: + clk = 0; + break; + } + + return clk; +} + +unsigned long ltq_vr9_pp32_hz(void) +{ + unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3; + unsigned long clk; + + switch (clksys) { + case 1: + clk = CLOCK_450M; + break; + case 2: + clk = CLOCK_300M; + break; + default: + clk = CLOCK_500M; + break; + } + + return clk; +} diff --git a/arch/mips/lantiq/xway/dcdc.c b/arch/mips/lantiq/xway/dcdc.c new file mode 100644 index 00000000000..7688ac0f06d --- /dev/null +++ b/arch/mips/lantiq/xway/dcdc.c @@ -0,0 +1,63 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + * Copyright (C) 2010 Sameer Ahmad, Lantiq GmbH + */ + +#include <linux/ioport.h> +#include <linux/of_platform.h> + +#include <lantiq_soc.h> + +/* Bias and regulator Setup Register */ +#define DCDC_BIAS_VREG0 0xa +/* Bias and regulator Setup Register */ +#define DCDC_BIAS_VREG1 0xb + +#define dcdc_w8(x, y) ltq_w8((x), dcdc_membase + (y)) +#define dcdc_r8(x) ltq_r8(dcdc_membase + (x)) + +static void __iomem *dcdc_membase; + +static int dcdc_probe(struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dcdc_membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dcdc_membase)) + return PTR_ERR(dcdc_membase); + + dev_info(&pdev->dev, "Core Voltage : %d mV\n", + dcdc_r8(DCDC_BIAS_VREG1) * 8); + + return 0; +} + +static const struct of_device_id dcdc_match[] = { + { .compatible = "lantiq,dcdc-xrx200" }, + {}, +}; + +static struct platform_driver dcdc_driver = { + .probe = dcdc_probe, + .driver = { + .name = "dcdc-xrx200", + .owner = THIS_MODULE, + .of_match_table = dcdc_match, + }, +}; + +int __init dcdc_init(void) +{ + int ret = platform_driver_register(&dcdc_driver); + + if (ret) + pr_info("dcdc: Error registering platform driver\n"); + return ret; +} + +arch_initcall(dcdc_init); diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c deleted file mode 100644 index e09e789dfc2..00000000000 --- a/arch/mips/lantiq/xway/devices.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mtd/physmap.h> -#include <linux/kernel.h> -#include <linux/reboot.h> -#include <linux/platform_device.h> -#include <linux/leds.h> -#include <linux/etherdevice.h> -#include <linux/reboot.h> -#include <linux/time.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/leds.h> - -#include <asm/bootinfo.h> -#include <asm/irq.h> - -#include <lantiq_soc.h> -#include <lantiq_irq.h> -#include <lantiq_platform.h> - -#include "devices.h" - -/* gpio */ -static struct resource ltq_gpio_resource[] = { - { - .name = "gpio0", - .start = LTQ_GPIO0_BASE_ADDR, - .end = LTQ_GPIO0_BASE_ADDR + LTQ_GPIO_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "gpio1", - .start = LTQ_GPIO1_BASE_ADDR, - .end = LTQ_GPIO1_BASE_ADDR + LTQ_GPIO_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "gpio2", - .start = LTQ_GPIO2_BASE_ADDR, - .end = LTQ_GPIO2_BASE_ADDR + LTQ_GPIO_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -void __init ltq_register_gpio(void) -{ - platform_device_register_simple("ltq_gpio", 0, - <q_gpio_resource[0], 1); - platform_device_register_simple("ltq_gpio", 1, - <q_gpio_resource[1], 1); - - /* AR9 and VR9 have an extra gpio block */ - if (ltq_is_ar9() || ltq_is_vr9()) { - platform_device_register_simple("ltq_gpio", 2, - <q_gpio_resource[2], 1); - } -} - -/* serial to parallel conversion */ -static struct resource ltq_stp_resource = { - .name = "stp", - .start = LTQ_STP_BASE_ADDR, - .end = LTQ_STP_BASE_ADDR + LTQ_STP_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -void __init ltq_register_gpio_stp(void) -{ - platform_device_register_simple("ltq_stp", 0, <q_stp_resource, 1); -} - -/* asc ports - amazon se has its own serial mapping */ -static struct resource ltq_ase_asc_resources[] = { - { - .name = "asc0", - .start = LTQ_ASC1_BASE_ADDR, - .end = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - IRQ_RES(tx, LTQ_ASC_ASE_TIR), - IRQ_RES(rx, LTQ_ASC_ASE_RIR), - IRQ_RES(err, LTQ_ASC_ASE_EIR), -}; - -void __init ltq_register_ase_asc(void) -{ - platform_device_register_simple("ltq_asc", 0, - ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources)); -} - -/* ethernet */ -static struct resource ltq_etop_resources = { - .name = "etop", - .start = LTQ_ETOP_BASE_ADDR, - .end = LTQ_ETOP_BASE_ADDR + LTQ_ETOP_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ltq_etop = { - .name = "ltq_etop", - .resource = <q_etop_resources, - .num_resources = 1, -}; - -void __init -ltq_register_etop(struct ltq_eth_data *eth) -{ - if (eth) { - ltq_etop.dev.platform_data = eth; - platform_device_register(<q_etop); - } -} diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h deleted file mode 100644 index e90493471bc..00000000000 --- a/arch/mips/lantiq/xway/devices.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#ifndef _LTQ_DEVICES_XWAY_H__ -#define _LTQ_DEVICES_XWAY_H__ - -#include "../devices.h" -#include <linux/phy.h> - -extern void ltq_register_gpio(void); -extern void ltq_register_gpio_stp(void); -extern void ltq_register_ase_asc(void); -extern void ltq_register_etop(struct ltq_eth_data *eth); - -#endif diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c index 4278a459d6c..78a91fa4194 100644 --- a/arch/mips/lantiq/xway/dma.c +++ b/arch/mips/lantiq/xway/dma.c @@ -19,10 +19,14 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/err.h> #include <lantiq_soc.h> #include <xway_dma.h> +#define LTQ_DMA_ID 0x08 #define LTQ_DMA_CTRL 0x10 #define LTQ_DMA_CPOLL 0x14 #define LTQ_DMA_CS 0x18 @@ -46,7 +50,7 @@ #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */ #define DMA_2W_BURST BIT(1) /* 2 word burst length */ #define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */ -#define DMA_ETOP_ENDIANESS (0xf << 8) /* endianess swap etop channels */ +#define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */ #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */ #define ltq_dma_r32(x) ltq_r32(ltq_dma_membase + (x)) @@ -54,13 +58,6 @@ #define ltq_dma_w32_mask(x, y, z) ltq_w32_mask(x, y, \ ltq_dma_membase + (z)) -static struct resource ltq_dma_resource = { - .name = "dma", - .start = LTQ_DMA_BASE_ADDR, - .end = LTQ_DMA_BASE_ADDR + LTQ_DMA_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - static void __iomem *ltq_dma_membase; void @@ -196,10 +193,10 @@ ltq_dma_init_port(int p) switch (p) { case DMA_PORT_ETOP: /* - * Tell the DMA engine to swap the endianess of data frames and + * Tell the DMA engine to swap the endianness of data frames and * drop packets if the channel arbitration fails. */ - ltq_dma_w32_mask(0, DMA_ETOP_ENDIANESS | DMA_PDEN, + ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN, LTQ_DMA_PCTRL); break; @@ -214,27 +211,25 @@ ltq_dma_init_port(int p) } EXPORT_SYMBOL_GPL(ltq_dma_init_port); -int __init -ltq_dma_init(void) +static int +ltq_dma_init(struct platform_device *pdev) { + struct clk *clk; + struct resource *res; + unsigned id; int i; - /* insert and request the memory region */ - if (insert_resource(&iomem_resource, <q_dma_resource) < 0) - panic("Failed to insert dma memory\n"); - - if (request_mem_region(ltq_dma_resource.start, - resource_size(<q_dma_resource), "dma") < 0) - panic("Failed to request dma memory\n"); - - /* remap dma register range */ - ltq_dma_membase = ioremap_nocache(ltq_dma_resource.start, - resource_size(<q_dma_resource)); - if (!ltq_dma_membase) - panic("Failed to remap dma memory\n"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ltq_dma_membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ltq_dma_membase)) + panic("Failed to remap dma resource"); /* power up and reset the dma engine */ - ltq_pmu_enable(PMU_DMA); + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) + panic("Failed to get dma clock"); + + clk_enable(clk); ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL); /* disable all interrupts */ @@ -247,7 +242,34 @@ ltq_dma_init(void) ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL); ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); } + + id = ltq_dma_r32(LTQ_DMA_ID); + dev_info(&pdev->dev, + "Init done - hw rev: %X, ports: %d, channels: %d\n", + id & 0x1f, (id >> 16) & 0xf, id >> 20); + return 0; } -postcore_initcall(ltq_dma_init); +static const struct of_device_id dma_match[] = { + { .compatible = "lantiq,dma-xway" }, + {}, +}; +MODULE_DEVICE_TABLE(of, dma_match); + +static struct platform_driver dma_driver = { + .probe = ltq_dma_init, + .driver = { + .name = "dma-xway", + .owner = THIS_MODULE, + .of_match_table = dma_match, + }, +}; + +int __init +dma_init(void) +{ + return platform_driver_register(&dma_driver); +} + +postcore_initcall(dma_init); diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c deleted file mode 100644 index 66eb52fa50a..00000000000 --- a/arch/mips/lantiq/xway/ebu.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * EBU - the external bus unit attaches PCI, NOR and NAND - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/version.h> -#include <linux/ioport.h> - -#include <lantiq_soc.h> - -/* all access to the ebu must be locked */ -DEFINE_SPINLOCK(ebu_lock); -EXPORT_SYMBOL_GPL(ebu_lock); - -static struct resource ltq_ebu_resource = { - .name = "ebu", - .start = LTQ_EBU_BASE_ADDR, - .end = LTQ_EBU_BASE_ADDR + LTQ_EBU_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -/* remapped base addr of the clock unit and external bus unit */ -void __iomem *ltq_ebu_membase; - -static int __init lantiq_ebu_init(void) -{ - /* insert and request the memory region */ - if (insert_resource(&iomem_resource, <q_ebu_resource) < 0) - panic("Failed to insert ebu memory\n"); - - if (request_mem_region(ltq_ebu_resource.start, - resource_size(<q_ebu_resource), "ebu") < 0) - panic("Failed to request ebu memory\n"); - - /* remap ebu register range */ - ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start, - resource_size(<q_ebu_resource)); - if (!ltq_ebu_membase) - panic("Failed to remap ebu memory\n"); - - /* make sure to unprotect the memory region where flash is located */ - ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); - return 0; -} - -postcore_initcall(lantiq_ebu_init); diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c deleted file mode 100644 index a321451a545..00000000000 --- a/arch/mips/lantiq/xway/gpio.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <lantiq_soc.h> - -#define LTQ_GPIO_OUT 0x00 -#define LTQ_GPIO_IN 0x04 -#define LTQ_GPIO_DIR 0x08 -#define LTQ_GPIO_ALTSEL0 0x0C -#define LTQ_GPIO_ALTSEL1 0x10 -#define LTQ_GPIO_OD 0x14 - -#define PINS_PER_PORT 16 -#define MAX_PORTS 3 - -#define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p))) -#define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r) -#define ltq_gpio_clearbit(m, r, p) ltq_w32_mask((1 << p), 0, m + r) - -struct ltq_gpio { - void __iomem *membase; - struct gpio_chip chip; -}; - -static struct ltq_gpio ltq_gpio_port[MAX_PORTS]; - -int gpio_to_irq(unsigned int gpio) -{ - return -EINVAL; -} -EXPORT_SYMBOL(gpio_to_irq); - -int irq_to_gpio(unsigned int gpio) -{ - return -EINVAL; -} -EXPORT_SYMBOL(irq_to_gpio); - -int ltq_gpio_request(unsigned int pin, unsigned int alt0, - unsigned int alt1, unsigned int dir, const char *name) -{ - int id = 0; - - if (pin >= (MAX_PORTS * PINS_PER_PORT)) - return -EINVAL; - if (gpio_request(pin, name)) { - pr_err("failed to setup lantiq gpio: %s\n", name); - return -EBUSY; - } - if (dir) - gpio_direction_output(pin, 1); - else - gpio_direction_input(pin); - while (pin >= PINS_PER_PORT) { - pin -= PINS_PER_PORT; - id++; - } - if (alt0) - ltq_gpio_setbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL0, pin); - else - ltq_gpio_clearbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL0, pin); - if (alt1) - ltq_gpio_setbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL1, pin); - else - ltq_gpio_clearbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL1, pin); - return 0; -} -EXPORT_SYMBOL(ltq_gpio_request); - -static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - if (value) - ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); - else - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); -} - -static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset); -} - -static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); - - return 0; -} - -static int ltq_gpio_direction_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); - ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); - ltq_gpio_set(chip, offset, value); - - return 0; -} - -static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset); - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset); - return 0; -} - -static int ltq_gpio_probe(struct platform_device *pdev) -{ - struct resource *res; - - if (pdev->id >= MAX_PORTS) { - dev_err(&pdev->dev, "invalid gpio port %d\n", - pdev->id); - return -EINVAL; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get memory for gpio port %d\n", - pdev->id); - return -ENOENT; - } - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, - "failed to request memory for gpio port %d\n", - pdev->id); - return -EBUSY; - } - ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev, - res->start, resource_size(res)); - if (!ltq_gpio_port[pdev->id].membase) { - dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n", - pdev->id); - return -ENOMEM; - } - ltq_gpio_port[pdev->id].chip.label = "ltq_gpio"; - ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input; - ltq_gpio_port[pdev->id].chip.direction_output = - ltq_gpio_direction_output; - ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get; - ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set; - ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req; - ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id; - ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT; - platform_set_drvdata(pdev, <q_gpio_port[pdev->id]); - return gpiochip_add(<q_gpio_port[pdev->id].chip); -} - -static struct platform_driver -ltq_gpio_driver = { - .probe = ltq_gpio_probe, - .driver = { - .name = "ltq_gpio", - .owner = THIS_MODULE, - }, -}; - -int __init ltq_gpio_init(void) -{ - int ret = platform_driver_register(<q_gpio_driver); - - if (ret) - pr_info("ltq_gpio : Error registering platfom driver!"); - return ret; -} - -postcore_initcall(ltq_gpio_init); diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c deleted file mode 100644 index a479355abdb..00000000000 --- a/arch/mips/lantiq/xway/gpio_ebu.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/platform_device.h> -#include <linux/mutex.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <lantiq_soc.h> - -/* - * By attaching hardware latches to the EBU it is possible to create output - * only gpios. This driver configures a special memory address, which when - * written to outputs 16 bit to the latches. - */ - -#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ -#define LTQ_EBU_WP 0x80000000 /* write protect bit */ - -/* we keep a shadow value of the last value written to the ebu */ -static int ltq_ebu_gpio_shadow = 0x0; -static void __iomem *ltq_ebu_gpio_membase; - -static void ltq_ebu_apply(void) -{ - unsigned long flags; - - spin_lock_irqsave(&ebu_lock, flags); - ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); - *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow; - ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); - spin_unlock_irqrestore(&ebu_lock, flags); -} - -static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (value) - ltq_ebu_gpio_shadow |= (1 << offset); - else - ltq_ebu_gpio_shadow &= ~(1 << offset); - ltq_ebu_apply(); -} - -static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - ltq_ebu_set(chip, offset, value); - - return 0; -} - -static struct gpio_chip ltq_ebu_chip = { - .label = "ltq_ebu", - .direction_output = ltq_ebu_direction_output, - .set = ltq_ebu_set, - .base = 72, - .ngpio = 16, - .can_sleep = 1, - .owner = THIS_MODULE, -}; - -static int ltq_ebu_probe(struct platform_device *pdev) -{ - int ret = 0; - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - if (!res) { - dev_err(&pdev->dev, "failed to get memory resource\n"); - return -ENOENT; - } - - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - return -EBUSY; - } - - ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!ltq_ebu_gpio_membase) { - dev_err(&pdev->dev, "Failed to ioremap mem region\n"); - return -ENOMEM; - } - - /* grab the default shadow value passed form the platform code */ - ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data; - - /* tell the ebu controller which memory address we will be using */ - ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1); - - /* write protect the region */ - ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); - - ret = gpiochip_add(<q_ebu_chip); - if (!ret) - ltq_ebu_apply(); - return ret; -} - -static struct platform_driver ltq_ebu_driver = { - .probe = ltq_ebu_probe, - .driver = { - .name = "ltq_ebu", - .owner = THIS_MODULE, - }, -}; - -static int __init ltq_ebu_init(void) -{ - int ret = platform_driver_register(<q_ebu_driver); - - if (ret) - pr_info("ltq_ebu : Error registering platfom driver!"); - return ret; -} - -postcore_initcall(ltq_ebu_init); diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c deleted file mode 100644 index 67d59d69034..00000000000 --- a/arch/mips/lantiq/xway/gpio_stp.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - */ - -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/platform_device.h> -#include <linux/mutex.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <lantiq_soc.h> - -#define LTQ_STP_CON0 0x00 -#define LTQ_STP_CON1 0x04 -#define LTQ_STP_CPU0 0x08 -#define LTQ_STP_CPU1 0x0C -#define LTQ_STP_AR 0x10 - -#define LTQ_STP_CON_SWU (1 << 31) -#define LTQ_STP_2HZ 0 -#define LTQ_STP_4HZ (1 << 23) -#define LTQ_STP_8HZ (2 << 23) -#define LTQ_STP_10HZ (3 << 23) -#define LTQ_STP_SPEED_MASK (0xf << 23) -#define LTQ_STP_UPD_FPI (1 << 31) -#define LTQ_STP_UPD_MASK (3 << 30) -#define LTQ_STP_ADSL_SRC (3 << 24) - -#define LTQ_STP_GROUP0 (1 << 0) - -#define LTQ_STP_RISING 0 -#define LTQ_STP_FALLING (1 << 26) -#define LTQ_STP_EDGE_MASK (1 << 26) - -#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg) -#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg) -#define ltq_stp_w32_mask(clear, set, reg) \ - ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \ - ltq_stp_membase + (reg)) - -static int ltq_stp_shadow = 0xffff; -static void __iomem *ltq_stp_membase; - -static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (value) - ltq_stp_shadow |= (1 << offset); - else - ltq_stp_shadow &= ~(1 << offset); - ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0); -} - -static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - ltq_stp_set(chip, offset, value); - - return 0; -} - -static struct gpio_chip ltq_stp_chip = { - .label = "ltq_stp", - .direction_output = ltq_stp_direction_output, - .set = ltq_stp_set, - .base = 48, - .ngpio = 24, - .can_sleep = 1, - .owner = THIS_MODULE, -}; - -static int ltq_stp_hw_init(void) -{ - /* the 3 pins used to control the external stp */ - ltq_gpio_request(4, 1, 0, 1, "stp-st"); - ltq_gpio_request(5, 1, 0, 1, "stp-d"); - ltq_gpio_request(6, 1, 0, 1, "stp-sh"); - - /* sane defaults */ - ltq_stp_w32(0, LTQ_STP_AR); - ltq_stp_w32(0, LTQ_STP_CPU0); - ltq_stp_w32(0, LTQ_STP_CPU1); - ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0); - ltq_stp_w32(0, LTQ_STP_CON1); - - /* rising or falling edge */ - ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0); - - /* per default stp 15-0 are set */ - ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1); - - /* stp are update periodically by the FPI bus */ - ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1); - - /* set stp update speed */ - ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1); - - /* tell the hardware that pin (led) 0 and 1 are controlled - * by the dsl arc - */ - ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0); - - ltq_pmu_enable(PMU_LED); - return 0; -} - -static int __devinit ltq_stp_probe(struct platform_device *pdev) -{ - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - int ret = 0; - - if (!res) - return -ENOENT; - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, "failed to request STP memory\n"); - return -EBUSY; - } - ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!ltq_stp_membase) { - dev_err(&pdev->dev, "failed to remap STP memory\n"); - return -ENOMEM; - } - ret = gpiochip_add(<q_stp_chip); - if (!ret) - ret = ltq_stp_hw_init(); - - return ret; -} - -static struct platform_driver ltq_stp_driver = { - .probe = ltq_stp_probe, - .driver = { - .name = "ltq_stp", - .owner = THIS_MODULE, - }, -}; - -int __init ltq_stp_init(void) -{ - int ret = platform_driver_register(<q_stp_driver); - - if (ret) - pr_info("ltq_stp: error registering platfom driver"); - return ret; -} - -postcore_initcall(ltq_stp_init); diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c new file mode 100644 index 00000000000..850821df924 --- /dev/null +++ b/arch/mips/lantiq/xway/gptu.c @@ -0,0 +1,210 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + * Copyright (C) 2012 Lantiq GmbH + */ + +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/of_irq.h> + +#include <lantiq_soc.h> +#include "../clk.h" + +/* the magic ID byte of the core */ +#define GPTU_MAGIC 0x59 +/* clock control register */ +#define GPTU_CLC 0x00 +/* id register */ +#define GPTU_ID 0x08 +/* interrupt node enable */ +#define GPTU_IRNEN 0xf4 +/* interrupt control register */ +#define GPTU_IRCR 0xf8 +/* interrupt capture register */ +#define GPTU_IRNCR 0xfc +/* there are 3 identical blocks of 2 timers. calculate register offsets */ +#define GPTU_SHIFT(x) (x % 2 ? 4 : 0) +#define GPTU_BASE(x) (((x >> 1) * 0x20) + 0x10) +/* timer control register */ +#define GPTU_CON(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00) +/* timer auto reload register */ +#define GPTU_RUN(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08) +/* timer manual reload register */ +#define GPTU_RLD(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10) +/* timer count register */ +#define GPTU_CNT(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18) + +/* GPTU_CON(x) */ +#define CON_CNT BIT(2) +#define CON_EDGE_ANY (BIT(7) | BIT(6)) +#define CON_SYNC BIT(8) +#define CON_CLK_INT BIT(10) + +/* GPTU_RUN(x) */ +#define RUN_SEN BIT(0) +#define RUN_RL BIT(2) + +/* set clock to runmode */ +#define CLC_RMC BIT(8) +/* bring core out of suspend */ +#define CLC_SUSPEND BIT(4) +/* the disable bit */ +#define CLC_DISABLE BIT(0) + +#define gptu_w32(x, y) ltq_w32((x), gptu_membase + (y)) +#define gptu_r32(x) ltq_r32(gptu_membase + (x)) + +enum gptu_timer { + TIMER1A = 0, + TIMER1B, + TIMER2A, + TIMER2B, + TIMER3A, + TIMER3B +}; + +static void __iomem *gptu_membase; +static struct resource irqres[6]; + +static irqreturn_t timer_irq_handler(int irq, void *priv) +{ + int timer = irq - irqres[0].start; + gptu_w32(1 << timer, GPTU_IRNCR); + return IRQ_HANDLED; +} + +static void gptu_hwinit(void) +{ + gptu_w32(0x00, GPTU_IRNEN); + gptu_w32(0xff, GPTU_IRNCR); + gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC); +} + +static void gptu_hwexit(void) +{ + gptu_w32(0x00, GPTU_IRNEN); + gptu_w32(0xff, GPTU_IRNCR); + gptu_w32(CLC_DISABLE, GPTU_CLC); +} + +static int gptu_enable(struct clk *clk) +{ + int ret = request_irq(irqres[clk->bits].start, timer_irq_handler, + IRQF_TIMER, "gtpu", NULL); + if (ret) { + pr_err("gptu: failed to request irq\n"); + return ret; + } + + gptu_w32(CON_CNT | CON_EDGE_ANY | CON_SYNC | CON_CLK_INT, + GPTU_CON(clk->bits)); + gptu_w32(1, GPTU_RLD(clk->bits)); + gptu_w32(gptu_r32(GPTU_IRNEN) | BIT(clk->bits), GPTU_IRNEN); + gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits)); + return 0; +} + +static void gptu_disable(struct clk *clk) +{ + gptu_w32(0, GPTU_RUN(clk->bits)); + gptu_w32(0, GPTU_CON(clk->bits)); + gptu_w32(0, GPTU_RLD(clk->bits)); + gptu_w32(gptu_r32(GPTU_IRNEN) & ~BIT(clk->bits), GPTU_IRNEN); + free_irq(irqres[clk->bits].start, NULL); +} + +static inline void clkdev_add_gptu(struct device *dev, const char *con, + unsigned int timer) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev_name(dev); + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = gptu_enable; + clk->disable = gptu_disable; + clk->bits = timer; + clkdev_add(&clk->cl); +} + +static int gptu_probe(struct platform_device *pdev) +{ + struct clk *clk; + struct resource *res; + + if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 6) != 6) { + dev_err(&pdev->dev, "Failed to get IRQ list\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* remap gptu register range */ + gptu_membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(gptu_membase)) + return PTR_ERR(gptu_membase); + + /* enable our clock */ + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Failed to get clock\n"); + return -ENOENT; + } + clk_enable(clk); + + /* power up the core */ + gptu_hwinit(); + + /* the gptu has a ID register */ + if (((gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) { + dev_err(&pdev->dev, "Failed to find magic\n"); + gptu_hwexit(); + clk_disable(clk); + clk_put(clk); + return -ENAVAIL; + } + + /* register the clocks */ + clkdev_add_gptu(&pdev->dev, "timer1a", TIMER1A); + clkdev_add_gptu(&pdev->dev, "timer1b", TIMER1B); + clkdev_add_gptu(&pdev->dev, "timer2a", TIMER2A); + clkdev_add_gptu(&pdev->dev, "timer2b", TIMER2B); + clkdev_add_gptu(&pdev->dev, "timer3a", TIMER3A); + clkdev_add_gptu(&pdev->dev, "timer3b", TIMER3B); + + dev_info(&pdev->dev, "gptu: 6 timers loaded\n"); + + return 0; +} + +static const struct of_device_id gptu_match[] = { + { .compatible = "lantiq,gptu-xway" }, + {}, +}; +MODULE_DEVICE_TABLE(of, dma_match); + +static struct platform_driver dma_driver = { + .probe = gptu_probe, + .driver = { + .name = "gptu-xway", + .owner = THIS_MODULE, + .of_match_table = gptu_match, + }, +}; + +int __init gptu_init(void) +{ + int ret = platform_driver_register(&dma_driver); + + if (ret) + pr_info("gptu: Error registering platform driver\n"); + return ret; +} + +arch_initcall(gptu_init); diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c deleted file mode 100644 index d5aaf637ab1..00000000000 --- a/arch/mips/lantiq/xway/mach-easy50601.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> - -#include <lantiq.h> - -#include "../machtypes.h" -#include "devices.h" - -static struct mtd_partition easy50601_partitions[] = { - { - .name = "uboot", - .offset = 0x0, - .size = 0x10000, - }, - { - .name = "uboot_env", - .offset = 0x10000, - .size = 0x10000, - }, - { - .name = "linux", - .offset = 0x20000, - .size = 0xE0000, - }, - { - .name = "rootfs", - .offset = 0x100000, - .size = 0x300000, - }, -}; - -static struct physmap_flash_data easy50601_flash_data = { - .nr_parts = ARRAY_SIZE(easy50601_partitions), - .parts = easy50601_partitions, -}; - -static void __init easy50601_init(void) -{ - ltq_register_nor(&easy50601_flash_data); -} - -MIPS_MACHINE(LTQ_MACH_EASY50601, - "EASY50601", - "EASY50601 Eval Board", - easy50601_init); diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c deleted file mode 100644 index ea5027b3239..00000000000 --- a/arch/mips/lantiq/xway/mach-easy50712.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/phy.h> - -#include <lantiq_soc.h> -#include <irq.h> - -#include "../machtypes.h" -#include "devices.h" - -static struct mtd_partition easy50712_partitions[] = { - { - .name = "uboot", - .offset = 0x0, - .size = 0x10000, - }, - { - .name = "uboot_env", - .offset = 0x10000, - .size = 0x10000, - }, - { - .name = "linux", - .offset = 0x20000, - .size = 0xe0000, - }, - { - .name = "rootfs", - .offset = 0x100000, - .size = 0x300000, - }, -}; - -static struct physmap_flash_data easy50712_flash_data = { - .nr_parts = ARRAY_SIZE(easy50712_partitions), - .parts = easy50712_partitions, -}; - -static struct ltq_pci_data ltq_pci_data = { - .clock = PCI_CLOCK_INT, - .gpio = PCI_GNT1 | PCI_REQ1, - .irq = { - [14] = INT_NUM_IM0_IRL0 + 22, - }, -}; - -static struct ltq_eth_data ltq_eth_data = { - .mii_mode = PHY_INTERFACE_MODE_MII, -}; - -static void __init easy50712_init(void) -{ - ltq_register_gpio_stp(); - ltq_register_nor(&easy50712_flash_data); - ltq_register_pci(<q_pci_data); - ltq_register_etop(<q_eth_data); -} - -MIPS_MACHINE(LTQ_MACH_EASY50712, - "EASY50712", - "EASY50712 Eval Board", - easy50712_init); diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c deleted file mode 100644 index 9d69f01e352..00000000000 --- a/arch/mips/lantiq/xway/pmu.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/version.h> -#include <linux/ioport.h> - -#include <lantiq_soc.h> - -/* PMU - the power management unit allows us to turn part of the core - * on and off - */ - -/* the enable / disable registers */ -#define LTQ_PMU_PWDCR 0x1C -#define LTQ_PMU_PWDSR 0x20 - -#define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y)) -#define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x)) - -static struct resource ltq_pmu_resource = { - .name = "pmu", - .start = LTQ_PMU_BASE_ADDR, - .end = LTQ_PMU_BASE_ADDR + LTQ_PMU_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static void __iomem *ltq_pmu_membase; - -void ltq_pmu_enable(unsigned int module) -{ - int err = 1000000; - - ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR); - do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module)); - - if (!err) - panic("activating PMU module failed!\n"); -} -EXPORT_SYMBOL(ltq_pmu_enable); - -void ltq_pmu_disable(unsigned int module) -{ - ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR); -} -EXPORT_SYMBOL(ltq_pmu_disable); - -int __init ltq_pmu_init(void) -{ - if (insert_resource(&iomem_resource, <q_pmu_resource) < 0) - panic("Failed to insert pmu memory\n"); - - if (request_mem_region(ltq_pmu_resource.start, - resource_size(<q_pmu_resource), "pmu") < 0) - panic("Failed to request pmu memory\n"); - - ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start, - resource_size(<q_pmu_resource)); - if (!ltq_pmu_membase) - panic("Failed to remap pmu memory\n"); - return 0; -} - -core_initcall(ltq_pmu_init); diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c deleted file mode 100644 index abe49f4db57..00000000000 --- a/arch/mips/lantiq/xway/prom-ase.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/module.h> -#include <linux/clk.h> -#include <asm/bootinfo.h> -#include <asm/time.h> - -#include <lantiq_soc.h> - -#include "../prom.h" - -#define SOC_AMAZON_SE "Amazon_SE" - -#define PART_SHIFT 12 -#define PART_MASK 0x0FFFFFFF -#define REV_SHIFT 28 -#define REV_MASK 0xF0000000 - -void __init ltq_soc_detect(struct ltq_soc_info *i) -{ - i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT; - i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT; - switch (i->partnum) { - case SOC_ID_AMAZON_SE: - i->name = SOC_AMAZON_SE; - i->type = SOC_TYPE_AMAZON_SE; - break; - - default: - unreachable(); - break; - } -} diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c deleted file mode 100644 index 1686692ac24..00000000000 --- a/arch/mips/lantiq/xway/prom-xway.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/module.h> -#include <linux/clk.h> -#include <asm/bootinfo.h> -#include <asm/time.h> - -#include <lantiq_soc.h> - -#include "../prom.h" - -#define SOC_DANUBE "Danube" -#define SOC_TWINPASS "Twinpass" -#define SOC_AR9 "AR9" - -#define PART_SHIFT 12 -#define PART_MASK 0x0FFFFFFF -#define REV_SHIFT 28 -#define REV_MASK 0xF0000000 - -void __init ltq_soc_detect(struct ltq_soc_info *i) -{ - i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT; - i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT; - switch (i->partnum) { - case SOC_ID_DANUBE1: - case SOC_ID_DANUBE2: - i->name = SOC_DANUBE; - i->type = SOC_TYPE_DANUBE; - break; - - case SOC_ID_TWINPASS: - i->name = SOC_TWINPASS; - i->type = SOC_TYPE_DANUBE; - break; - - case SOC_ID_ARX188: - case SOC_ID_ARX168: - case SOC_ID_ARX182: - i->name = SOC_AR9; - i->type = SOC_TYPE_AR9; - break; - - default: - unreachable(); - break; - } -} diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c new file mode 100644 index 00000000000..248429ab262 --- /dev/null +++ b/arch/mips/lantiq/xway/prom.c @@ -0,0 +1,115 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/export.h> +#include <linux/clk.h> +#include <asm/bootinfo.h> +#include <asm/time.h> + +#include <lantiq_soc.h> + +#include "../prom.h" + +#define SOC_DANUBE "Danube" +#define SOC_TWINPASS "Twinpass" +#define SOC_AMAZON_SE "Amazon_SE" +#define SOC_AR9 "AR9" +#define SOC_GR9 "GR9" +#define SOC_VR9 "VR9" + +#define COMP_DANUBE "lantiq,danube" +#define COMP_TWINPASS "lantiq,twinpass" +#define COMP_AMAZON_SE "lantiq,ase" +#define COMP_AR9 "lantiq,ar9" +#define COMP_GR9 "lantiq,gr9" +#define COMP_VR9 "lantiq,vr9" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFFFFF +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 + +void __init ltq_soc_detect(struct ltq_soc_info *i) +{ + i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT; + sprintf(i->rev_type, "1.%d", i->rev); + switch (i->partnum) { + case SOC_ID_DANUBE1: + case SOC_ID_DANUBE2: + i->name = SOC_DANUBE; + i->type = SOC_TYPE_DANUBE; + i->compatible = COMP_DANUBE; + break; + + case SOC_ID_TWINPASS: + i->name = SOC_TWINPASS; + i->type = SOC_TYPE_DANUBE; + i->compatible = COMP_TWINPASS; + break; + + case SOC_ID_ARX188: + case SOC_ID_ARX168_1: + case SOC_ID_ARX168_2: + case SOC_ID_ARX182: + i->name = SOC_AR9; + i->type = SOC_TYPE_AR9; + i->compatible = COMP_AR9; + break; + + case SOC_ID_GRX188: + case SOC_ID_GRX168: + i->name = SOC_GR9; + i->type = SOC_TYPE_AR9; + i->compatible = COMP_GR9; + break; + + case SOC_ID_AMAZON_SE_1: + case SOC_ID_AMAZON_SE_2: +#ifdef CONFIG_PCI + panic("ase is only supported for non pci kernels"); +#endif + i->name = SOC_AMAZON_SE; + i->type = SOC_TYPE_AMAZON_SE; + i->compatible = COMP_AMAZON_SE; + break; + + case SOC_ID_VRX282: + case SOC_ID_VRX268: + case SOC_ID_VRX288: + i->name = SOC_VR9; + i->type = SOC_TYPE_VR9; + i->compatible = COMP_VR9; + break; + + case SOC_ID_GRX268: + case SOC_ID_GRX288: + i->name = SOC_GR9; + i->type = SOC_TYPE_VR9; + i->compatible = COMP_GR9; + break; + + case SOC_ID_VRX268_2: + case SOC_ID_VRX288_2: + i->name = SOC_VR9; + i->type = SOC_TYPE_VR9_2; + i->compatible = COMP_VR9; + break; + + case SOC_ID_GRX282_2: + case SOC_ID_GRX288_2: + i->name = SOC_GR9; + i->type = SOC_TYPE_VR9_2; + i->compatible = COMP_GR9; + break; + + default: + unreachable(); + break; + } +} diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index a1be36d0e49..1fa0f175357 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -10,76 +10,150 @@ #include <linux/io.h> #include <linux/ioport.h> #include <linux/pm.h> -#include <linux/module.h> +#include <linux/export.h> +#include <linux/delay.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + #include <asm/reboot.h> #include <lantiq_soc.h> +#include "../prom.h" + #define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y)) #define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x)) -/* register definitions */ -#define LTQ_RCU_RST 0x0010 -#define LTQ_RCU_RST_ALL 0x40000000 - -#define LTQ_RCU_RST_STAT 0x0014 -#define LTQ_RCU_STAT_SHIFT 26 - -static struct resource ltq_rcu_resource = { - .name = "rcu", - .start = LTQ_RCU_BASE_ADDR, - .end = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1, - .flags = IORESOURCE_MEM, -}; +/* reset request register */ +#define RCU_RST_REQ 0x0010 +/* reset status register */ +#define RCU_RST_STAT 0x0014 +/* vr9 gphy registers */ +#define RCU_GFS_ADD0_XRX200 0x0020 +#define RCU_GFS_ADD1_XRX200 0x0068 + +/* reboot bit */ +#define RCU_RD_GPHY0_XRX200 BIT(31) +#define RCU_RD_SRST BIT(30) +#define RCU_RD_GPHY1_XRX200 BIT(29) + +/* reset cause */ +#define RCU_STAT_SHIFT 26 +/* boot selection */ +#define RCU_BOOT_SEL(x) ((x >> 18) & 0x7) +#define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10)) /* remapped base addr of the reset control unit */ static void __iomem *ltq_rcu_membase; +static struct device_node *ltq_rcu_np; /* This function is used by the watchdog driver */ int ltq_reset_cause(void) { - u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT); - return val >> LTQ_RCU_STAT_SHIFT; + u32 val = ltq_rcu_r32(RCU_RST_STAT); + return val >> RCU_STAT_SHIFT; } EXPORT_SYMBOL_GPL(ltq_reset_cause); +/* allow platform code to find out what source we booted from */ +unsigned char ltq_boot_select(void) +{ + u32 val = ltq_rcu_r32(RCU_RST_STAT); + + if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) + return RCU_BOOT_SEL_XRX200(val); + + return RCU_BOOT_SEL(val); +} + +/* reset / boot a gphy */ +static struct ltq_xrx200_gphy_reset { + u32 rd; + u32 addr; +} xrx200_gphy[] = { + {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200}, + {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200}, +}; + +/* reset and boot a gphy. these phys only exist on xrx200 SoC */ +int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) +{ + struct clk *clk; + + if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) { + dev_err(dev, "this SoC has no GPHY\n"); + return -EINVAL; + } + + clk = clk_get_sys("1f203000.rcu", "gphy"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clk_enable(clk); + + if (id > 1) { + dev_err(dev, "%u is an invalid gphy id\n", id); + return -EINVAL; + } + dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr); + + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd, + RCU_RST_REQ); + ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr); + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd, + RCU_RST_REQ); + return 0; +} + +/* reset a io domain for u micro seconds */ +void ltq_reset_once(unsigned int module, ulong u) +{ + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ); + udelay(u); + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ); +} + static void ltq_machine_restart(char *command) { - pr_notice("System restart\n"); local_irq_disable(); - ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST); + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ); unreachable(); } static void ltq_machine_halt(void) { - pr_notice("System halted.\n"); local_irq_disable(); unreachable(); } static void ltq_machine_power_off(void) { - pr_notice("Please turn off the power now.\n"); local_irq_disable(); unreachable(); } static int __init mips_reboot_setup(void) { - /* insert and request the memory region */ - if (insert_resource(&iomem_resource, <q_rcu_resource) < 0) - panic("Failed to insert rcu memory\n"); + struct resource res; + + ltq_rcu_np = of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); + if (!ltq_rcu_np) + ltq_rcu_np = of_find_compatible_node(NULL, NULL, + "lantiq,rcu-xrx200"); + + /* check if all the reset register range is available */ + if (!ltq_rcu_np) + panic("Failed to load reset resources from devicetree"); + + if (of_address_to_resource(ltq_rcu_np, 0, &res)) + panic("Failed to get rcu memory range"); - if (request_mem_region(ltq_rcu_resource.start, - resource_size(<q_rcu_resource), "rcu") < 0) - panic("Failed to request rcu memory\n"); + if (request_mem_region(res.start, resource_size(&res), res.name) < 0) + pr_err("Failed to request rcu memory"); - /* remap rcu register range */ - ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start, - resource_size(<q_rcu_resource)); + ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res)); if (!ltq_rcu_membase) - panic("Failed to remap rcu memory\n"); + panic("Failed to remap core memory"); _machine_restart = ltq_machine_restart; _machine_halt = ltq_machine_halt; diff --git a/arch/mips/lantiq/xway/setup-ase.c b/arch/mips/lantiq/xway/setup-ase.c deleted file mode 100644 index f6f326798a3..00000000000 --- a/arch/mips/lantiq/xway/setup-ase.c +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2011 John Crispin <blogic@openwrt.org> - */ - -#include <lantiq_soc.h> - -#include "../prom.h" -#include "devices.h" - -void __init ltq_soc_setup(void) -{ - ltq_register_ase_asc(); - ltq_register_gpio(); - ltq_register_wdt(); -} diff --git a/arch/mips/lantiq/xway/setup-xway.c b/arch/mips/lantiq/xway/setup-xway.c deleted file mode 100644 index c292f643a85..00000000000 --- a/arch/mips/lantiq/xway/setup-xway.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2011 John Crispin <blogic@openwrt.org> - */ - -#include <lantiq_soc.h> - -#include "../prom.h" -#include "devices.h" - -void __init ltq_soc_setup(void) -{ - ltq_register_asc(0); - ltq_register_asc(1); - ltq_register_gpio(); - ltq_register_wdt(); -} diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c new file mode 100644 index 00000000000..51804b10a03 --- /dev/null +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -0,0 +1,388 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011-2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/ioport.h> +#include <linux/export.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> + +#include <lantiq_soc.h> + +#include "../clk.h" +#include "../prom.h" + +/* clock control register */ +#define CGU_IFCCR 0x0018 +#define CGU_IFCCR_VR9 0x0024 +/* system clock register */ +#define CGU_SYS 0x0010 +/* pci control register */ +#define CGU_PCICR 0x0034 +#define CGU_PCICR_VR9 0x0038 +/* ephy configuration register */ +#define CGU_EPHY 0x10 +/* power control register */ +#define PMU_PWDCR 0x1C +/* power status register */ +#define PMU_PWDSR 0x20 +/* power control register */ +#define PMU_PWDCR1 0x24 +/* power status register */ +#define PMU_PWDSR1 0x28 +/* power control register */ +#define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR)) +/* power status register */ +#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR)) + +/* clock gates that we can en/disable */ +#define PMU_USB0_P BIT(0) +#define PMU_PCI BIT(4) +#define PMU_DMA BIT(5) +#define PMU_USB0 BIT(6) +#define PMU_ASC0 BIT(7) +#define PMU_EPHY BIT(7) /* ase */ +#define PMU_SPI BIT(8) +#define PMU_DFE BIT(9) +#define PMU_EBU BIT(10) +#define PMU_STP BIT(11) +#define PMU_GPT BIT(12) +#define PMU_AHBS BIT(13) /* vr9 */ +#define PMU_FPI BIT(14) +#define PMU_AHBM BIT(15) +#define PMU_ASC1 BIT(17) +#define PMU_PPE_QSB BIT(18) +#define PMU_PPE_SLL01 BIT(19) +#define PMU_PPE_TC BIT(21) +#define PMU_PPE_EMA BIT(22) +#define PMU_PPE_DPLUM BIT(23) +#define PMU_PPE_DPLUS BIT(24) +#define PMU_USB1_P BIT(26) +#define PMU_USB1 BIT(27) +#define PMU_SWITCH BIT(28) +#define PMU_PPE_TOP BIT(29) +#define PMU_GPHY BIT(30) +#define PMU_PCIE_CLK BIT(31) + +#define PMU1_PCIE_PHY BIT(0) +#define PMU1_PCIE_CTL BIT(1) +#define PMU1_PCIE_PDI BIT(4) +#define PMU1_PCIE_MSI BIT(5) + +#define pmu_w32(x, y) ltq_w32((x), pmu_membase + (y)) +#define pmu_r32(x) ltq_r32(pmu_membase + (x)) + +static void __iomem *pmu_membase; +void __iomem *ltq_cgu_membase; +void __iomem *ltq_ebu_membase; + +static u32 ifccr = CGU_IFCCR; +static u32 pcicr = CGU_PCICR; + +/* legacy function kept alive to ease clkdev transition */ +void ltq_pmu_enable(unsigned int module) +{ + int err = 1000000; + + pmu_w32(pmu_r32(PMU_PWDCR) & ~module, PMU_PWDCR); + do {} while (--err && (pmu_r32(PMU_PWDSR) & module)); + + if (!err) + panic("activating PMU module failed!"); +} +EXPORT_SYMBOL(ltq_pmu_enable); + +/* legacy function kept alive to ease clkdev transition */ +void ltq_pmu_disable(unsigned int module) +{ + pmu_w32(pmu_r32(PMU_PWDCR) | module, PMU_PWDCR); +} +EXPORT_SYMBOL(ltq_pmu_disable); + +/* enable a hw clock */ +static int cgu_enable(struct clk *clk) +{ + ltq_cgu_w32(ltq_cgu_r32(ifccr) | clk->bits, ifccr); + return 0; +} + +/* disable a hw clock */ +static void cgu_disable(struct clk *clk) +{ + ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~clk->bits, ifccr); +} + +/* enable a clock gate */ +static int pmu_enable(struct clk *clk) +{ + int retry = 1000000; + + pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits, + PWDCR(clk->module)); + do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits)); + + if (!retry) + panic("activating PMU module failed!"); + + return 0; +} + +/* disable a clock gate */ +static void pmu_disable(struct clk *clk) +{ + pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits, + PWDCR(clk->module)); +} + +/* the pci enable helper */ +static int pci_enable(struct clk *clk) +{ + unsigned int val = ltq_cgu_r32(ifccr); + /* set bus clock speed */ + if (of_machine_is_compatible("lantiq,ar9") || + of_machine_is_compatible("lantiq,vr9")) { + val &= ~0x1f00000; + if (clk->rate == CLOCK_33M) + val |= 0xe00000; + else + val |= 0x700000; /* 62.5M */ + } else { + val &= ~0xf00000; + if (clk->rate == CLOCK_33M) + val |= 0x800000; + else + val |= 0x400000; /* 62.5M */ + } + ltq_cgu_w32(val, ifccr); + pmu_enable(clk); + return 0; +} + +/* enable the external clock as a source */ +static int pci_ext_enable(struct clk *clk) +{ + ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~(1 << 16), ifccr); + ltq_cgu_w32((1 << 30), pcicr); + return 0; +} + +/* disable the external clock as a source */ +static void pci_ext_disable(struct clk *clk) +{ + ltq_cgu_w32(ltq_cgu_r32(ifccr) | (1 << 16), ifccr); + ltq_cgu_w32((1 << 31) | (1 << 30), pcicr); +} + +/* enable a clockout source */ +static int clkout_enable(struct clk *clk) +{ + int i; + + /* get the correct rate */ + for (i = 0; i < 4; i++) { + if (clk->rates[i] == clk->rate) { + int shift = 14 - (2 * clk->module); + int enable = 7 - clk->module; + unsigned int val = ltq_cgu_r32(ifccr); + + val &= ~(3 << shift); + val |= i << shift; + val |= enable; + ltq_cgu_w32(val, ifccr); + return 0; + } + } + return -1; +} + +/* manage the clock gates via PMU */ +static void clkdev_add_pmu(const char *dev, const char *con, + unsigned int module, unsigned int bits) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev; + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = pmu_enable; + clk->disable = pmu_disable; + clk->module = module; + clk->bits = bits; + clkdev_add(&clk->cl); +} + +/* manage the clock generator */ +static void clkdev_add_cgu(const char *dev, const char *con, + unsigned int bits) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev; + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = cgu_enable; + clk->disable = cgu_disable; + clk->bits = bits; + clkdev_add(&clk->cl); +} + +/* pci needs its own enable function as the setup is a bit more complex */ +static unsigned long valid_pci_rates[] = {CLOCK_33M, CLOCK_62_5M, 0}; + +static void clkdev_add_pci(void) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL); + + /* main pci clock */ + clk->cl.dev_id = "17000000.pci"; + clk->cl.con_id = NULL; + clk->cl.clk = clk; + clk->rate = CLOCK_33M; + clk->rates = valid_pci_rates; + clk->enable = pci_enable; + clk->disable = pmu_disable; + clk->module = 0; + clk->bits = PMU_PCI; + clkdev_add(&clk->cl); + + /* use internal/external bus clock */ + clk_ext->cl.dev_id = "17000000.pci"; + clk_ext->cl.con_id = "external"; + clk_ext->cl.clk = clk_ext; + clk_ext->enable = pci_ext_enable; + clk_ext->disable = pci_ext_disable; + clkdev_add(&clk_ext->cl); +} + +/* xway socs can generate clocks on gpio pins */ +static unsigned long valid_clkout_rates[4][5] = { + {CLOCK_32_768K, CLOCK_1_536M, CLOCK_2_5M, CLOCK_12M, 0}, + {CLOCK_40M, CLOCK_12M, CLOCK_24M, CLOCK_48M, 0}, + {CLOCK_25M, CLOCK_40M, CLOCK_30M, CLOCK_60M, 0}, + {CLOCK_12M, CLOCK_50M, CLOCK_32_768K, CLOCK_25M, 0}, +}; + +static void clkdev_add_clkout(void) +{ + int i; + + for (i = 0; i < 4; i++) { + struct clk *clk; + char *name; + + name = kzalloc(sizeof("clkout0"), GFP_KERNEL); + sprintf(name, "clkout%d", i); + + clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + clk->cl.dev_id = "1f103000.cgu"; + clk->cl.con_id = name; + clk->cl.clk = clk; + clk->rate = 0; + clk->rates = valid_clkout_rates[i]; + clk->enable = clkout_enable; + clk->module = i; + clkdev_add(&clk->cl); + } +} + +/* bring up all register ranges that we need for basic system control */ +void __init ltq_soc_init(void) +{ + struct resource res_pmu, res_cgu, res_ebu; + struct device_node *np_pmu = + of_find_compatible_node(NULL, NULL, "lantiq,pmu-xway"); + struct device_node *np_cgu = + of_find_compatible_node(NULL, NULL, "lantiq,cgu-xway"); + struct device_node *np_ebu = + of_find_compatible_node(NULL, NULL, "lantiq,ebu-xway"); + + /* check if all the core register ranges are available */ + if (!np_pmu || !np_cgu || !np_ebu) + panic("Failed to load core nodes from devicetree"); + + if (of_address_to_resource(np_pmu, 0, &res_pmu) || + of_address_to_resource(np_cgu, 0, &res_cgu) || + of_address_to_resource(np_ebu, 0, &res_ebu)) + panic("Failed to get core resources"); + + if ((request_mem_region(res_pmu.start, resource_size(&res_pmu), + res_pmu.name) < 0) || + (request_mem_region(res_cgu.start, resource_size(&res_cgu), + res_cgu.name) < 0) || + (request_mem_region(res_ebu.start, resource_size(&res_ebu), + res_ebu.name) < 0)) + pr_err("Failed to request core reources"); + + pmu_membase = ioremap_nocache(res_pmu.start, resource_size(&res_pmu)); + ltq_cgu_membase = ioremap_nocache(res_cgu.start, + resource_size(&res_cgu)); + ltq_ebu_membase = ioremap_nocache(res_ebu.start, + resource_size(&res_ebu)); + if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase) + panic("Failed to remap core resources"); + + /* make sure to unprotect the memory region where flash is located */ + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); + + /* add our generic xway clocks */ + clkdev_add_pmu("10000000.fpi", NULL, 0, PMU_FPI); + clkdev_add_pmu("1e100400.serial", NULL, 0, PMU_ASC0); + clkdev_add_pmu("1e100a00.gptu", NULL, 0, PMU_GPT); + clkdev_add_pmu("1e100bb0.stp", NULL, 0, PMU_STP); + clkdev_add_pmu("1e104100.dma", NULL, 0, PMU_DMA); + clkdev_add_pmu("1e100800.spi", NULL, 0, PMU_SPI); + clkdev_add_pmu("1e105300.ebu", NULL, 0, PMU_EBU); + clkdev_add_clkout(); + + /* add the soc dependent clocks */ + if (of_machine_is_compatible("lantiq,vr9")) { + ifccr = CGU_IFCCR_VR9; + pcicr = CGU_PCICR_VR9; + } else { + clkdev_add_pmu("1e180000.etop", NULL, 0, PMU_PPE); + } + + if (!of_machine_is_compatible("lantiq,ase")) { + clkdev_add_pmu("1e100c00.serial", NULL, 0, PMU_ASC1); + clkdev_add_pci(); + } + + if (of_machine_is_compatible("lantiq,ase")) { + if (ltq_cgu_r32(CGU_SYS) & (1 << 5)) + clkdev_add_static(CLOCK_266M, CLOCK_133M, + CLOCK_133M, CLOCK_266M); + else + clkdev_add_static(CLOCK_133M, CLOCK_133M, + CLOCK_133M, CLOCK_133M); + clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY), + clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY); + } else if (of_machine_is_compatible("lantiq,vr9")) { + clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(), + ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz()); + clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY); + clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK); + clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI); + clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI); + clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL); + clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS); + clkdev_add_pmu("1e108000.eth", NULL, 0, + PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB | PMU_PPE_TOP); + clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY); + } else if (of_machine_is_compatible("lantiq,ar9")) { + clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), + ltq_ar9_fpi_hz(), CLOCK_250M); + clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH); + } else { + clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), + ltq_danube_fpi_hz(), ltq_danube_pp32_hz()); + } +} diff --git a/arch/mips/lantiq/xway/xrx200_phy_fw.c b/arch/mips/lantiq/xway/xrx200_phy_fw.c new file mode 100644 index 00000000000..d4d9d31f152 --- /dev/null +++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c @@ -0,0 +1,97 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/of_platform.h> + +#include <lantiq_soc.h> + +#define XRX200_GPHY_FW_ALIGN (16 * 1024) + +static dma_addr_t xway_gphy_load(struct platform_device *pdev) +{ + const struct firmware *fw; + dma_addr_t dev_addr = 0; + const char *fw_name; + void *fw_addr; + size_t size; + + if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) { + dev_err(&pdev->dev, "failed to load firmware filename\n"); + return 0; + } + + dev_info(&pdev->dev, "requesting %s\n", fw_name); + if (request_firmware(&fw, fw_name, &pdev->dev)) { + dev_err(&pdev->dev, "failed to load firmware: %s\n", fw_name); + return 0; + } + + /* + * GPHY cores need the firmware code in a persistent and contiguous + * memory area with a 16 kB boundary aligned start address + */ + size = fw->size + XRX200_GPHY_FW_ALIGN; + + fw_addr = dma_alloc_coherent(&pdev->dev, size, &dev_addr, GFP_KERNEL); + if (fw_addr) { + fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); + dev_addr = ALIGN(dev_addr, XRX200_GPHY_FW_ALIGN); + memcpy(fw_addr, fw->data, fw->size); + } else { + dev_err(&pdev->dev, "failed to alloc firmware memory\n"); + } + + release_firmware(fw); + return dev_addr; +} + +static int xway_phy_fw_probe(struct platform_device *pdev) +{ + dma_addr_t fw_addr; + struct property *pp; + unsigned char *phyids; + int i, ret = 0; + + fw_addr = xway_gphy_load(pdev); + if (!fw_addr) + return -EINVAL; + pp = of_find_property(pdev->dev.of_node, "phys", NULL); + if (!pp) + return -ENOENT; + phyids = pp->value; + for (i = 0; i < pp->length && !ret; i++) + ret = xrx200_gphy_boot(&pdev->dev, phyids[i], fw_addr); + if (!ret) + mdelay(100); + return ret; +} + +static const struct of_device_id xway_phy_match[] = { + { .compatible = "lantiq,phy-xrx200" }, + {}, +}; +MODULE_DEVICE_TABLE(of, xway_phy_match); + +static struct platform_driver xway_phy_driver = { + .probe = xway_phy_fw_probe, + .driver = { + .name = "phy-xrx200", + .owner = THIS_MODULE, + .of_match_table = xway_phy_match, + }, +}; + +module_platform_driver(xway_phy_driver); + +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_DESCRIPTION("Lantiq XRX200 PHY Firmware Loader"); +MODULE_LICENSE("GPL"); |